Airworthiness Directives; Airbus SAS Airplanes, 7765-7767 [2022-02723]

Download as PDF Federal Register / Vol. 87, No. 28 / Thursday, February 10, 2022 / Proposed Rules information and treat it according to its determination. It is DOE’s policy that all comments may be included in the public docket, without change and as received, including any personal information provided in the comments (except information deemed to be exempt from public disclosure). V. Approval of the Office of the Secretary The Secretary of Energy has approved publication of this notification of a webinar and availability of preliminary technical support document. Signing Authority This document of the Department of Energy was signed on February 3, 2022, by Kelly J. Speakes-Backman, Principal Deputy Assistant Secretary for Efficiency and Renewable Energy, pursuant to delegated authority from the Secretary of Energy. That document with the original signature and date is maintained by DOE. For administrative purposes only, and in compliance with requirements of the Office of the Federal Register, the undersigned DOE Federal Register Liaison Officer has been authorized to sign and submit the document in electronic format for publication, as an official document of the Department of Energy. This administrative process in no way alters the legal effect of this document upon publication in the Federal Register. Signed in Washington, DC, on February 4, 2022. Treena V. Garrett, Federal Register Liaison Officer, U.S. Department of Energy. [FR Doc. 2022–02719 Filed 2–9–22; 8:45 am] BILLING CODE 6450–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2022–0098; Project Identifier MCAI–2021–01084–T] RIN 2120–AA64 jspears on DSK121TN23PROD with PROPOSALS1 Airworthiness Directives; Airbus SAS Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350–941 and –1041 airplanes. This proposed AD SUMMARY: VerDate Sep<11>2014 16:44 Feb 09, 2022 Jkt 256001 was prompted by a report indicating that on the A350 final assembly line (FAL), certain load sensing drive struts (LSDS) and drive struts (DS) were found not adjusted (the nut was not torqued) and not locked. Investigation revealed that the LSDS and DS had been changed as re-work action due to pre-installation damage, but production operations (adjustment and locking) were not done afterwards. This proposed AD would require, for certain airplanes, inspection of the LSDS for correct adjustment and locking, and replacement if necessary, and, for certain other airplanes, replacement of each affected DS with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by March 28, 2022. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For material that will be incorporated by reference (IBR) in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA–2022–0098. Examining the AD Docket You may examine the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA–2022–0098; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this PO 00000 Frm 00008 Fmt 4702 Sfmt 4702 7765 NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3225; email dan.rodina@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2022–0098; Project Identifier MCAI–2021–01084–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https:// www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Dan Rodina, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax E:\FR\FM\10FEP1.SGM 10FEP1 7766 Federal Register / Vol. 87, No. 28 / Thursday, February 10, 2022 / Proposed Rules 206–231–3225; email dan.rodina@ faa.gov. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. Background EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2021–0220, dated October 1, 2021 (EASA AD 2021– 0220), to correct an unsafe condition for certain Airbus SAS Model A350–941 and –1041 airplanes. This proposed AD was prompted by a report indicating that on the A350 FAL, LSDS track 1 and DS track 2 were found not adjusted (the nut was not torqued) and not locked. Investigation revealed that the LSDS and DS had been changed as re-work action due to preinstallation damage, but production operations (adjustment and locking) were not done afterwards. The FAA is proposing this AD to prevent degradation of the load-carrying capability of an LSDS or DS, which could result in the in-flight detachment of a flap, resulting in structural damage and reduced controllability of the airplane. See the MCAI for additional background information. Related Service Information Under 1 CFR Part 51 EASA AD 2021–0220 describes procedures for a detailed inspection of the LSDS for correct adjustment and locking, and replacement of the LSDS if any discrepancy (movement of either nut) is found, for airplanes in Configurations 1 through 4. The service information also describes procedures for replacement of each affected DS with a serviceable part, for airplanes in Configurations 5 and 6. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. FAA’s Determination This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to the FAA’s bilateral agreement with the State of Design Authority, the FAA has been notified of the unsafe condition described in the MCAI referenced above. The FAA is proposing this AD because the FAA evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop in other products of the same type design. Proposed AD Requirements in This NPRM This proposed AD would require accomplishing the actions specified in EASA AD 2021–0220 described previously, except for any differences identified as exceptions in the regulatory text of this proposed AD. Explanation of Required Compliance Information In the FAA’s ongoing efforts to improve the efficiency of the AD process, the FAA developed a process to use some civil aviation authority (CAA) ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has been coordinating this process with manufacturers and CAAs. As a result, the FAA proposes to incorporate EASA AD 2021–0220 by reference in the FAA final rule. This proposed AD would, therefore, require compliance with EASA AD 2021–0220 in its entirety through that incorporation, except for any differences identified as exceptions in the regulatory text of this proposed AD. Using common terms that are the same as the heading of a particular section in EASA AD 2021–0220 does not mean that operators need comply only with that section. For example, where the AD requirement refers to ‘‘all required actions and compliance times,’’ compliance with this AD requirement is not limited to the section titled ‘‘Required Action(s) and Compliance Time(s)’’ in EASA AD 2021–0220. Service information required by EASA AD 2021–0220 for compliance will be available at https://www.regulations.gov by searching for and locating Docket No. FAA–2022–0098 after the FAA final rule is published. Costs of Compliance The FAA estimates that this proposed AD affects 6 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS FOR REQUIRED ACTIONS Labor cost Parts cost Cost per product Cost on U.S. operators LSDS inspection: Up to 14 work-hours × $85 per hour = Up to $1,190. DS replacement: Up to 11 work-hours × $85 per hour = Up to $935. $0 ....................................... $Up to $1,190 .................... Up to $7,140 (6 airplanes). $Up to 84,470 .................... Up to $85,405 .................... Up to $85,405 (1 airplane). The FAA estimates the following costs to do any necessary on-condition LSDS replacement that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need this on-condition replacement: jspears on DSK121TN23PROD with PROPOSALS1 ESTIMATED COSTS OF ON-CONDITION ACTIONS Labor cost Parts cost Up to 10 work-hours (2 per LSDS) × $85 per hour = Up to $850 ................................................................. Up to $76,173 .... According to the manufacturer, some or all of the costs of this proposed AD may be covered under warranty, thereby reducing the cost impact on affected individuals. The FAA does not control warranty coverage for affected VerDate Sep<11>2014 16:44 Feb 09, 2022 Jkt 256001 individuals. As a result, the FAA has included all known costs in the cost estimate. Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue PO 00000 Frm 00009 Fmt 4702 Sfmt 4702 Cost per product Up to $77,023. rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. E:\FR\FM\10FEP1.SGM 10FEP1 Federal Register / Vol. 87, No. 28 / Thursday, February 10, 2022 / Proposed Rules The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Would not affect intrastate aviation in Alaska, and (3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: jspears on DSK121TN23PROD with PROPOSALS1 ■ Airbus SAS: Docket No. FAA–2022–0098; Project Identifier MCAI–2021–01084–T. (a) Comments Due Date The FAA must receive comments on this airworthiness directive (AD) by March 28, 2022. VerDate Sep<11>2014 16:44 Feb 09, 2022 Jkt 256001 (b) Affected ADs None. (c) Applicability This AD applies to Airbus SAS Model A350–941 and –1041 airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2021–0220, dated October 1, 2021 (EASA AD 2021–0220). (d) Subject Air Transport Association (ATA) of America Code 27, Flight Controls. (e) Unsafe Condition This AD was prompted by a report indicating that on the A350 final assembly line (FAL), certain load sensing drive struts (LSDS) and drive struts (DS) were found not adjusted (the nut was not torqued) and not locked. Investigation revealed that the LSDS and DS had been changed as re-work action due to pre-installation damage, but production operations (adjustment and locking) were not done afterwards. The FAA is issuing this AD to prevent degradation of the load-carrying capability of an LSDS or DS, which could result in the in-flight detachment of a flap, resulting in structural damage and reduced controllability of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2021–0220. (h) Exceptions to EASA AD 2021–0220 (1) Where EASA AD 2021–0220 refers to its effective date, this AD requires using the effective date of this AD. (2) Where paragraph (2) of EASA AD 2021– 0220 refers to a ‘‘discrepancy, as defined in the SB,’’ this AD defines a discrepancy as movement of either nut. (3) The ‘‘Remarks’’ section of EASA AD 2021–0220 does not apply to this AD. (i) No Reporting Requirement Although the service information referenced in EASA AD 2021–0220 specifies to submit certain information to the manufacturer, this AD does not include that requirement. (j) Additional AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person PO 00000 Frm 00010 Fmt 4702 Sfmt 9990 7767 identified in paragraph (k)(2) of this AD. Information may be emailed to: 9-AVS-AIR730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Airbus SAS’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature. (3) Required for Compliance (RC): If any service information contains procedures or tests that are identified as RC, those procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC. (k) Related Information (1) For information about EASA AD 2021– 0220 contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2022–0098. (2) For more information about this AD, contact Dan Rodina, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3225; email dan.rodina@ faa.gov. Issued on February 4, 2022. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2022–02723 Filed 2–9–22; 8:45 am] BILLING CODE 4910–13–P E:\FR\FM\10FEP1.SGM 10FEP1

Agencies

[Federal Register Volume 87, Number 28 (Thursday, February 10, 2022)]
[Proposed Rules]
[Pages 7765-7767]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-02723]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2022-0098; Project Identifier MCAI-2021-01084-T]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for certain Airbus SAS Model A350-941 and -1041 airplanes. This 
proposed AD was prompted by a report indicating that on the A350 final 
assembly line (FAL), certain load sensing drive struts (LSDS) and drive 
struts (DS) were found not adjusted (the nut was not torqued) and not 
locked. Investigation revealed that the LSDS and DS had been changed as 
re-work action due to pre-installation damage, but production 
operations (adjustment and locking) were not done afterwards. This 
proposed AD would require, for certain airplanes, inspection of the 
LSDS for correct adjustment and locking, and replacement if necessary, 
and, for certain other airplanes, replacement of each affected DS with 
a serviceable part, as specified in a European Union Aviation Safety 
Agency (EASA) AD, which is proposed for incorporation by reference. The 
FAA is proposing this AD to address the unsafe condition on these 
products.

DATES: The FAA must receive comments on this proposed AD by March 28, 
2022.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For material that will be incorporated by reference (IBR) in this 
AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; 
telephone +49 221 8999 000; email [email protected]; internet 
www.easa.europa.eu. You may find this IBR material on the EASA website 
at https://ad.easa.europa.eu. You may view this IBR material at the 
FAA, Airworthiness Products Section, Operational Safety Branch, 2200 
South 216th St., Des Moines, WA. For information on the availability of 
this material at the FAA, call 206-231-3195. It is also available in 
the AD docket at https://www.regulations.gov by searching for and 
locating Docket No. FAA-2022-0098.

Examining the AD Docket

    You may examine the AD docket at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2022-0098; or in person at 
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays. The AD docket contains this NPRM, the 
mandatory continuing airworthiness information (MCAI), any comments 
received, and other information. The street address for Docket 
Operations is listed above.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large 
Aircraft Section, International Validation Branch, FAA, 2200 South 
216th St., Des Moines, WA 98198; telephone and fax 206-231-3225; email 
[email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2022-0098; Project Identifier 
MCAI-2021-01084-T'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
this proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
https://www.regulations.gov, including any personal information you 
provide. The agency will also post a report summarizing each 
substantive verbal contact received about this NPRM.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to Dan 
Rodina, Aerospace Engineer, Large Aircraft Section, International 
Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; 
telephone and fax

[[Page 7766]]

206-231-3225; email [email protected]. Any commentary that the FAA 
receives which is not specifically designated as CBI will be placed in 
the public docket for this rulemaking.

Background

    EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2021-0220, dated October 1, 2021 
(EASA AD 2021-0220), to correct an unsafe condition for certain Airbus 
SAS Model A350-941 and -1041 airplanes.
    This proposed AD was prompted by a report indicating that on the 
A350 FAL, LSDS track 1 and DS track 2 were found not adjusted (the nut 
was not torqued) and not locked. Investigation revealed that the LSDS 
and DS had been changed as re-work action due to pre-installation 
damage, but production operations (adjustment and locking) were not 
done afterwards. The FAA is proposing this AD to prevent degradation of 
the load-carrying capability of an LSDS or DS, which could result in 
the in-flight detachment of a flap, resulting in structural damage and 
reduced controllability of the airplane. See the MCAI for additional 
background information.

Related Service Information Under 1 CFR Part 51

    EASA AD 2021-0220 describes procedures for a detailed inspection of 
the LSDS for correct adjustment and locking, and replacement of the 
LSDS if any discrepancy (movement of either nut) is found, for 
airplanes in Configurations 1 through 4. The service information also 
describes procedures for replacement of each affected DS with a 
serviceable part, for airplanes in Configurations 5 and 6. This 
material is reasonably available because the interested parties have 
access to it through their normal course of business or by the means 
identified in the ADDRESSES section.

FAA's Determination

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to the FAA's bilateral agreement with the State of Design Authority, 
the FAA has been notified of the unsafe condition described in the MCAI 
referenced above. The FAA is proposing this AD because the FAA 
evaluated all the relevant information and determined the unsafe 
condition described previously is likely to exist or develop in other 
products of the same type design.

Proposed AD Requirements in This NPRM

    This proposed AD would require accomplishing the actions specified 
in EASA AD 2021-0220 described previously, except for any differences 
identified as exceptions in the regulatory text of this proposed AD.

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA developed a process to use some civil aviation 
authority (CAA) ADs as the primary source of information for compliance 
with requirements for corresponding FAA ADs. The FAA has been 
coordinating this process with manufacturers and CAAs. As a result, the 
FAA proposes to incorporate EASA AD 2021-0220 by reference in the FAA 
final rule. This proposed AD would, therefore, require compliance with 
EASA AD 2021-0220 in its entirety through that incorporation, except 
for any differences identified as exceptions in the regulatory text of 
this proposed AD. Using common terms that are the same as the heading 
of a particular section in EASA AD 2021-0220 does not mean that 
operators need comply only with that section. For example, where the AD 
requirement refers to ``all required actions and compliance times,'' 
compliance with this AD requirement is not limited to the section 
titled ``Required Action(s) and Compliance Time(s)'' in EASA AD 2021-
0220. Service information required by EASA AD 2021-0220 for compliance 
will be available at https://www.regulations.gov by searching for and 
locating Docket No. FAA-2022-0098 after the FAA final rule is 
published.

Costs of Compliance

    The FAA estimates that this proposed AD affects 6 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this 
proposed AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
              Labor cost                      Parts cost            Cost per product      Cost on U.S. operators
----------------------------------------------------------------------------------------------------------------
LSDS inspection: Up to 14              $0.....................  $Up to $1,190..........  Up to $7,140 (6
 work[dash]hours x $85 per hour = Up                                                      airplanes).
 to $1,190.
DS replacement: Up to 11 work-hours x  $Up to 84,470..........  Up to $85,405..........  Up to $85,405 (1
 $85 per hour = Up to $935.                                                               airplane).
----------------------------------------------------------------------------------------------------------------

    The FAA estimates the following costs to do any necessary on-
condition LSDS replacement that would be required based on the results 
of any required actions. The FAA has no way of determining the number 
of aircraft that might need this on-condition replacement:

                                     Estimated Costs of On-Condition Actions
----------------------------------------------------------------------------------------------------------------
                Labor cost                             Parts cost                       Cost per product
----------------------------------------------------------------------------------------------------------------
Up to 10 work-hours (2 per LSDS) x $85     Up to $76,173.....................  Up to $77,023.
 per hour = Up to $850.
----------------------------------------------------------------------------------------------------------------

    According to the manufacturer, some or all of the costs of this 
proposed AD may be covered under warranty, thereby reducing the cost 
impact on affected individuals. The FAA does not control warranty 
coverage for affected individuals. As a result, the FAA has included 
all known costs in the cost estimate.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.

[[Page 7767]]

    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Would not affect intrastate aviation in Alaska, and
    (3) Would not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

Airbus SAS: Docket No. FAA-2022-0098; Project Identifier MCAI-2021-
01084-T.

(a) Comments Due Date

    The FAA must receive comments on this airworthiness directive 
(AD) by March 28, 2022.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Airbus SAS Model A350-941 and -1041 
airplanes, certificated in any category, as identified in European 
Union Aviation Safety Agency (EASA) AD 2021-0220, dated October 1, 
2021 (EASA AD 2021-0220).

(d) Subject

    Air Transport Association (ATA) of America Code 27, Flight 
Controls.

(e) Unsafe Condition

    This AD was prompted by a report indicating that on the A350 
final assembly line (FAL), certain load sensing drive struts (LSDS) 
and drive struts (DS) were found not adjusted (the nut was not 
torqued) and not locked. Investigation revealed that the LSDS and DS 
had been changed as re-work action due to pre-installation damage, 
but production operations (adjustment and locking) were not done 
afterwards. The FAA is issuing this AD to prevent degradation of the 
load-carrying capability of an LSDS or DS, which could result in the 
in-flight detachment of a flap, resulting in structural damage and 
reduced controllability of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, EASA AD 2021-0220.

(h) Exceptions to EASA AD 2021-0220

    (1) Where EASA AD 2021-0220 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) Where paragraph (2) of EASA AD 2021-0220 refers to a 
``discrepancy, as defined in the SB,'' this AD defines a discrepancy 
as movement of either nut.
    (3) The ``Remarks'' section of EASA AD 2021-0220 does not apply 
to this AD.

(i) No Reporting Requirement

    Although the service information referenced in EASA AD 2021-0220 
specifies to submit certain information to the manufacturer, this AD 
does not include that requirement.

(j) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Large Aircraft Section, International Validation Branch, FAA, has 
the authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or responsible Flight 
Standards Office, as appropriate. If sending information directly to 
the Large Aircraft Section, International Validation Branch, send it 
to the attention of the person identified in paragraph (k)(2) of 
this AD. Information may be emailed to: [email protected]. 
Before using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, Large Aircraft 
Section, International Validation Branch, FAA; or EASA; or Airbus 
SAS's EASA Design Organization Approval (DOA). If approved by the 
DOA, the approval must include the DOA-authorized signature.
    (3) Required for Compliance (RC): If any service information 
contains procedures or tests that are identified as RC, those 
procedures and tests must be done to comply with this AD; any 
procedures or tests that are not identified as RC are recommended. 
Those procedures and tests that are not identified as RC may be 
deviated from using accepted methods in accordance with the 
operator's maintenance or inspection program without obtaining 
approval of an AMOC, provided the procedures and tests identified as 
RC can be done and the airplane can be put back in an airworthy 
condition. Any substitutions or changes to procedures or tests 
identified as RC require approval of an AMOC.

(k) Related Information

    (1) For information about EASA AD 2021-0220 contact EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 
8999 000; email [email protected]; internet www.easa.europa.eu. You 
may find this EASA AD on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 
South 216th St., Des Moines, WA. For information on the availability 
of this material at the FAA, call 206-231-3195. This material may be 
found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-
2022-0098.
    (2) For more information about this AD, contact Dan Rodina, 
Aerospace Engineer, Large Aircraft Section, International Validation 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 
and fax 206-231-3225; email [email protected].

    Issued on February 4, 2022.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification 
Service.
[FR Doc. 2022-02723 Filed 2-9-22; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.