Conforming Amendments to Product Exclusion Extensions: China's Acts, Policies, and Practices Related to Technology Transfer, Intellectual Property, and Innovation, 4704-4705 [2022-01732]
Download as PDF
4704
Federal Register / Vol. 87, No. 19 / Friday, January 28, 2022 / Notices
disbursement, disaster loan borrowers
are required to submit information to
demonstrate that they used loan
proceeds for authorized purposes only
and to make certain certification
regarding current financial condition
and previously reported compensation
paid in connection with the loan.
Solicitation of Public Comments
SBA is requesting comments on (a)
Whether the collection of information is
necessary for the agency to properly
perform its functions; (b) whether the
burden estimates are accurate; (c)
whether there are ways to minimize the
burden, including through the use of
automated techniques or other forms of
information technology; and (d) whether
there are ways to enhance the quality,
utility, and clarity of the information.
Summary of Information Collection
OMB Control Number: 3245–0110.
Title: Borrower’s Progress
Certification.
Description of Respondents: Disaster
loan Borrowers.
Form Number: SBA Form 1366.
Total Estimated Annual Responses:
14,218.
Total Estimated Annual Hour Burden:
7,106.
Curtis Rich,
Management Analyst.
[FR Doc. 2022–01726 Filed 1–27–22; 8:45 am]
BILLING CODE 8026–03–P
SMALL BUSINESS ADMINISTRATION
60-Day notice and request for
comments.
The Small Business
Administration (SBA) intends to request
approval, from the Office of
Management and Budget (OMB) for the
collection of information described
below. The Paperwork Reduction Act
(PRA) requires federal agencies to
publish a notice in the Federal Register
concerning each proposed collection of
information before submission to OMB,
and to allow 60 days for public
comment in response to the notice. This
notice complies with that requirement.
DATES: Submit comments on or before
March 29, 2022.
ADDRESSES: Send all comments to
Michael Donadieu, Senior Examiner,
Office of SBIC Examinations, OII, Small
Business Administration Washington,
DC 20416.
FOR FURTHER INFORMATION CONTACT:
Michael Donadieu, Senior Examiner,
jspears on DSK121TN23PROD with NOTICES1
18:03 Jan 27, 2022
Jkt 256001
Title: ‘‘Request for Information
Concerning Portfolio Financing’’.
Description of Respondents: Small
Business Investment Companies.
Form Number: 857.
Annual Responses: 2,250.
Annual Burden: 2,250.
Curtis Rich,
Management Analyst.
[FR Doc. 2022–01723 Filed 1–27–22; 8:45 am]
BILLING CODE 8026–03–P
OFFICE OF THE UNITED STATES
TRADE REPRESENTATIVE
Conforming Amendments to Product
Exclusion Extensions: China’s Acts,
Policies, and Practices Related to
Technology Transfer, Intellectual
Property, and Innovation
Office of the United States
Trade Representative (USTR).
ACTION: Notice.
ACTION:
VerDate Sep<11>2014
OMB Control Number 3245–0109
AGENCY:
Data Collection Available for Public
Comments
SUMMARY:
Office of SBIC Examinations, OII, 202–
205–7281, michael.donadieu@sba.gov,
or Curtis B. Rich, Management Analyst,
202–205–7030, curtis.rich@sba.gov.
SUPPLEMENTARY INFORMATION: Form 857
is used by SBA examiners to obtain
information about financing provided
by small business investment
companies (SBICs). This information,
which is collected directly from the
financed small business, provides
independent confirmation of
information reported to SBA by SBICs,
as well as additional information not
reported by SBICs.
A. Background
Effective January 27, 2022, the USITC,
in accordance with Presidential
Proclamation 10326 of December 23,
2021, will implement certain changes in
ten digit statistical reporting categories
of the HTSUS in accordance with its
responsibility to update the HTSUS to
conform to amendments adopted by the
World Customs Organization. Three of
the currently applicable product
exclusions in the Section 301
investigation of China’s Acts, Policies,
and Practices Related to Technology
Transfer, Intellectual Property, and
Innovation, as set out at 85 FR 85831
(December 29, 2020), 86 FR 13785
(March 10, 2021), and 86 FR 63438
(November 16, 2021) are based on the
amended statistical reporting categories.
B. Technical Amendments to Exclusion
Extensions
The Annex to this notice conforms
three existing product exclusions with
the January 27, 2022 changes to ten digit
statistical reporting categories in the
HTSUS. In particular, the Annex makes
a technical amendment to U.S. notes
20(sss)(i)(1), 20(sss)(iii)(14), and
20(iii)(15) to subchapter III of chapter 99
of the HTSUS, as set out in the Annexes
to the notices published at 85 FR 85831
(December 29, 2020), 86 FR 13785
(March 10, 2021), and 86 FR 63438
(November 16, 2021).
Annex
Effective with respect to goods
entered for consumption, or withdrawn
from warehouse for consumption, on or
SUMMARY: Effective January 27, 2022, the after 12:01 a.m. eastern daylight time on
U.S. International Trade Commission
[January 27, 2022] and before 11:59 p.m.
(USITC) will implement certain changes eastern daylight time on [May 31, 2022]:
to statistical reporting categories in the
1. Note 20(sss)(i)(1) to subchapter III
Harmonized Tariff Schedule of the
of chapter 99 of the Harmonized Tariff
United States (HTSUS). As a result of
Schedule of the United States (HTSUS)
these changes, USTR is making three
is amended by deleting ‘‘8421.39.8090’’
conforming amendments to product
exclusion extensions in the above-titled and by inserting ‘‘8421.39.8090 prior to
January 27, 2022; described in statistical
investigation under Section 301.
reporting number 8421.39.0190 effective
DATES: The conforming amendments in
January 27, 2022’’ in lieu thereof;
the Annex to this notice are effective
2. Note 20(sss)(iii)(14) to subchapter
January 27, 2022.
III
of chapter 99 of the HTSUS is
FOR FURTHER INFORMATION CONTACT: For
amended by deleting ‘‘3824.99.9297’’
general questions about this notice,
and by inserting ‘‘3824.99.9297 prior to
contact Associate General Counsel
January 27, 2022; described in statistical
Philip Butler or Assistant General
Counsel Rachel Hasandras at (202) 395– reporting number 3824.99.9397 effective
5725. For specific questions on customs January 27, 2022’’ in lieu thereof; and
classification or implementation of the
3. Note 20(sss)(iii)(15) to subchapter
product exclusion identified in the
III of chapter 99 of the HTSUS is
Annex to this notice, contact
amended by deleting ‘‘3824.99.9297’’
traderemedy@cbp.dhs.gov.
and by inserting ‘‘3824.99.9297 prior to
SUPPLEMENTARY INFORMATION:
January 27, 2022; described in statistical
PO 00000
Frm 00153
Fmt 4703
Sfmt 4703
E:\FR\FM\28JAN1.SGM
28JAN1
Federal Register / Vol. 87, No. 19 / Friday, January 28, 2022 / Notices
reporting number 3824.99.9397 effective
January 27, 2022’’ in lieu thereof.
Greta Peisch,
General Counsel, Office of the United States
Trade Representative.
[FR Doc. 2022–01732 Filed 1–27–22; 8:45 am]
BILLING CODE 3390–F2–P
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety
Administration
[Docket No. NHTSA–2019–0098; Notice 2]
Toyota Motor North America, Inc.,
Grant of Petition for Decision of
Inconsequential Noncompliance
National Highway Traffic
Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Grant of petition.
AGENCY:
Toyota Motor North America,
Inc., (Toyota) has determined that
certain model year (MY) 2019 Toyota
Tacoma motor vehicles do not fully
comply with Federal Motor Vehicle
Safety Standard (FMVSS) No. 209, Seat
Belt Assemblies. Toyota filed a
noncompliance report dated September
5, 2019. Toyota subsequently petitioned
NHTSA on September 27, 2019, for a
decision that the subject noncompliance
is inconsequential as it relates to motor
vehicle safety. This notice announces
the grant of Toyota’s petition.
FOR FURTHER INFORMATION CONTACT: Jack
Chern, Office of Vehicle Safety
Compliance, the National Highway
Traffic Safety Administration (NHTSA),
telephone (202) 366–0661, jack.chern@
dot.gov.
SUMMARY:
SUPPLEMENTARY INFORMATION:
jspears on DSK121TN23PROD with NOTICES1
I. Overview
Toyota has determined that certain
MY 2019 Toyota Tacoma Double Cab
motor vehicles do not fully comply with
paragraph S4.1 of FMVSS No. 209, Seat
Belt Assemblies (49 CFR 571.209).
Toyota filed a noncompliance report
dated September 5, 2019 pursuant to 49
CFR part 573, Defect and
Noncompliance Responsibility and
Reports. Toyota subsequently petitioned
NHTSA on September 27, 2019, for an
exemption from the notification and
remedy requirements of 49 U.S.C
chapter 301 on the basis that this
noncompliance is inconsequential as it
relates to motor vehicle safety pursuant
to 49 U.S.C. 30118(d) and 30120(h) and
49 CFR part 556, Exemption for
Inconsequential Defect or
Noncompliance.
VerDate Sep<11>2014
18:03 Jan 27, 2022
Jkt 256001
Notice of receipt of Toyota’s petition
was published with a 30-day public
comment period, on January 3, 2020, in
the Federal Register (85 FR 415). Three
comments were received. To view the
petition and all supporting documents,
log onto the Federal Docket
Management System (FDMS) website at
https://www.regulations.gov/. Then
follow the online search instructions to
locate docket number ‘‘NHTSA–2019–
0098.’’
II. Vehicles Involved
Approximately 70 MY 2019 Toyota
Tacoma Double Cab motor vehicles,
manufactured between July 25, 2019,
and July 30, 2019, are potentially
involved.
III. Noncompliance
Toyota explains that the
noncompliance is that the subject
vehicles are missing seat belt labels on
the rear center seat belt assemblies and
therefore, do not meet the requirements
set forth in paragraph S4.1 of FMVSS
No. 209. Specifically, the label which is
sewn to the rear center seat belt may
have been mistakenly removed by a
worker while scanning the code on the
label.
IV. Rule Requirements
Paragraph S4.1(j) of FMVSS No. 209
includes the requirements relevant to
this petition. Each seat belt assembly
shall be permanently and legibly
marked or labeled with the year of
manufacture, model, and name or
trademark of manufacturer or
distributor, or of importer if
manufactured outside the United States.
V. Summary of Toyota’s Petition
The following views and arguments
presented in this section are the views
and arguments provided by Toyota.
They do not reflect the views of the
agency.
Toyota described the subject
noncompliance and stated its belief that
the noncompliance is inconsequential
as it relates to motor vehicle safety.
Toyota submitted the following views
and arguments in support of the
petition:
1. The noncompliant seat belt
assemblies were properly installed, and
due to Toyota’s replacement parts
ordering systems, improper replacement
seat belt assembly selection and
installation would not be likely to
occur:
Toyota stated that the primary
purpose of the seat belt label required
by S4.1(j) of FMVSS No. 209 is to
identify the seat belt in the event it
needs to be replaced. Toyota contends
PO 00000
Frm 00154
Fmt 4703
Sfmt 4703
4705
that there are other means to identify
the seat belt without looking at the
label, and these methods are equally
effective in identifying the correct seat
belt to install in a vehicle in the event
a replacement is needed.
According to Toyota, all the
noncomplying seat belts were installed
as original equipment in the subject
vehicles and are unique to the Tacoma
rear center seat; they cannot be properly
installed in any other Tacoma seating
positions and are not used on any other
Toyota or Lexus models (Service
replacement parts are not affected and
contain required labels). Toyota also
states that manufacturing processes and
the unique properties of this center rear
belt assembly match the correct rear
center seat belt with the rear seat that is
tied to a specific VIN. Toyota states this
assures that an incorrect seat belt will
not be installed in a vehicle during its
assembly. If a seat belt replacement is
needed, the service parts system would
also preclude the purchase and
installation of an improper replacement
seat belt assembly. Toyota’s petition
contends that seat belt assembly service
parts are ordered through the Toyota
authorized dealership system using the
seat belt assembly part number or the
VIN and that replacement parts for the
subject seat belt assemblies are not
distributed through the general
automotive aftermarket; they are only
sold by Toyota dealers. Toyota also
states that the seat belt retractor has a
separate label with the supplier part
number, which can further help identify
the seat belt during replacement.
The Toyota petition further states that
when a purchaser orders a seat belt
replacement part, the installation
instruction, usage, and maintenance
instructions are included in the service
parts packaging and clearly identify that
the seat belt is for a Toyota Tacoma and
identify the seat belt installation
location. According to Toyota, these
instructions comply with paragraph
S4.1(k) of FMVSS No. 209.
Given the purpose of paragraph
S4.1(j) of FMVSS No. 209 Toyota
believes there are alternative methods as
noted above that can be used to identify
seat belts if they need to be replaced.
Therefore, Toyota states that the
noncompliant seat belts as installed in
the vehicle do not present a safety risk,
and the chance of an incorrect seat belt
being installed in a vehicle is essentially
zero.
2. In the event of a recall the seat belt
installed in each vehicle can be
identified based on the VIN:
Another purpose of the labeling
requirement in the standard is to allow
for easier identification of a seat belt in
E:\FR\FM\28JAN1.SGM
28JAN1
Agencies
[Federal Register Volume 87, Number 19 (Friday, January 28, 2022)]
[Notices]
[Pages 4704-4705]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-01732]
=======================================================================
-----------------------------------------------------------------------
OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE
Conforming Amendments to Product Exclusion Extensions: China's
Acts, Policies, and Practices Related to Technology Transfer,
Intellectual Property, and Innovation
AGENCY: Office of the United States Trade Representative (USTR).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Effective January 27, 2022, the U.S. International Trade
Commission (USITC) will implement certain changes to statistical
reporting categories in the Harmonized Tariff Schedule of the United
States (HTSUS). As a result of these changes, USTR is making three
conforming amendments to product exclusion extensions in the above-
titled investigation under Section 301.
DATES: The conforming amendments in the Annex to this notice are
effective January 27, 2022.
FOR FURTHER INFORMATION CONTACT: For general questions about this
notice, contact Associate General Counsel Philip Butler or Assistant
General Counsel Rachel Hasandras at (202) 395-5725. For specific
questions on customs classification or implementation of the product
exclusion identified in the Annex to this notice, contact
[email protected].
SUPPLEMENTARY INFORMATION:
A. Background
Effective January 27, 2022, the USITC, in accordance with
Presidential Proclamation 10326 of December 23, 2021, will implement
certain changes in ten digit statistical reporting categories of the
HTSUS in accordance with its responsibility to update the HTSUS to
conform to amendments adopted by the World Customs Organization. Three
of the currently applicable product exclusions in the Section 301
investigation of China's Acts, Policies, and Practices Related to
Technology Transfer, Intellectual Property, and Innovation, as set out
at 85 FR 85831 (December 29, 2020), 86 FR 13785 (March 10, 2021), and
86 FR 63438 (November 16, 2021) are based on the amended statistical
reporting categories.
B. Technical Amendments to Exclusion Extensions
The Annex to this notice conforms three existing product exclusions
with the January 27, 2022 changes to ten digit statistical reporting
categories in the HTSUS. In particular, the Annex makes a technical
amendment to U.S. notes 20(sss)(i)(1), 20(sss)(iii)(14), and
20(iii)(15) to subchapter III of chapter 99 of the HTSUS, as set out in
the Annexes to the notices published at 85 FR 85831 (December 29,
2020), 86 FR 13785 (March 10, 2021), and 86 FR 63438 (November 16,
2021).
Annex
Effective with respect to goods entered for consumption, or
withdrawn from warehouse for consumption, on or after 12:01 a.m.
eastern daylight time on [January 27, 2022] and before 11:59 p.m.
eastern daylight time on [May 31, 2022]:
1. Note 20(sss)(i)(1) to subchapter III of chapter 99 of the
Harmonized Tariff Schedule of the United States (HTSUS) is amended by
deleting ``8421.39.8090'' and by inserting ``8421.39.8090 prior to
January 27, 2022; described in statistical reporting number
8421.39.0190 effective January 27, 2022'' in lieu thereof;
2. Note 20(sss)(iii)(14) to subchapter III of chapter 99 of the
HTSUS is amended by deleting ``3824.99.9297'' and by inserting
``3824.99.9297 prior to January 27, 2022; described in statistical
reporting number 3824.99.9397 effective January 27, 2022'' in lieu
thereof; and
3. Note 20(sss)(iii)(15) to subchapter III of chapter 99 of the
HTSUS is amended by deleting ``3824.99.9297'' and by inserting
``3824.99.9297 prior to January 27, 2022; described in statistical
[[Page 4705]]
reporting number 3824.99.9397 effective January 27, 2022'' in lieu
thereof.
Greta Peisch,
General Counsel, Office of the United States Trade Representative.
[FR Doc. 2022-01732 Filed 1-27-22; 8:45 am]
BILLING CODE 3390-F2-P