Agency Information Collection Activities; Proposed Collection; Comment Request; Small Business Lending Fund Quarterly Supplemental Report, 2983-2984 [2022-00890]
Download as PDF
jspears on DSK121TN23PROD with NOTICES1
Federal Register / Vol. 87, No. 12 / Wednesday, January 19, 2022 / Notices
and labeling requirements. Nonetheless,
BMW’s petition establishes that the
incorrectly marked windscreens on the
affected motorcycles conform to all
FMVSS No. 205 performance
requirements as evidenced in a test
report showing the windscreens meet all
the AS6 glazing performance
requirements required by FMVSS No.
205.
As the performance requirements are
met, NHTSA’s principal concern is
whether the noncompliant marking of
the windscreen creates a safety risk in
the event that consumers mistakenly
believe the glazing meets the impact,
abrasion, and dimensional stability
requirements of AS4 glazing or attempt
to replace the windscreen with AS4
glazing.
First, NHTSA considered whether the
mismarking would lead a consumer to
believe that the windscreen offers the
same level of performance provided by
AS4 glazing that is not provided by AS6
glazing material. Specifically, NHTSA
considered whether a rider would
believe that, as a result of the
mismarking, the windscreen provides
impact protection and meets
dimensional stability and abrasion
requirements. While this could be a
potential safety risk, the size and
placement of the subject windscreen
was factored into NHTSA’s analysis.
The windscreens come in two sizes, one
measuring 316 mm wide by 309 mm
high, and the other measuring 314 mm
wide by 216 mm high. The size, design,
and placement of the subject
windscreens appear such that a rider
would expect that they would offer little
to no impact protection. Further, the
size and placement of the windscreens
are such NHTSA does not believe that
the mismarking will create a safety risk
from riders believing that the
windscreen meets the abrasion and
dimensional stability requirements of
AS4 glazing. According to BMW, the
subject windscreens are intended to
protect the dashboard electronics,
deflect wind away from the rider, and
serve as an aesthetic design for the
motorcycle. Further, NHTSA believes
that few riders know the differences in
performance of AS4 and AS6 glazing.
NHTSA believes that due to the size,
design, placement of the subject
windscreens, and the likelihood that
riders would know the differences
between the performance of AS4 and
AS6 glazing, riders are unlikely to
believe that the windscreen offers a
higher level of performance than
actually offered by the noncompliant
windscreens.
Second, in the case that the
windscreens require replacement,
VerDate Sep<11>2014
16:58 Jan 18, 2022
Jkt 256001
NHTSA believes that there is minimal
risk in a motorcyclist being misled by
the improper marking and concluding
that a replacement windscreen must be
of AS4 glazing rather than AS6 flexible
glazing. The Agency believes that this
risk is minimal because an AS4
replacement part would not be available
and obtaining such a part would require
that the new windscreen be custom
fabricated from rigid AS4 glazing. If
such fabrication were possible, it would
likely entail considerable inconvenience
and expense. Further, BMW or another
replacement part supplier would be able
to easily identify the correct AS6
replacement glazing through their
replacement parts identification
systems.
BMW’s petition also cited multiple
instances where NHTSA previously
determined that incorrect AS markings
on glazing were inconsequential for
safety. The Agency first notes that use
of previous determinations for
inconsequential noncompliance should
be viewed with caution as each
inconsequential noncompliance petition
is evaluated on the individual facts
presented and determinations are made
on a case-by-case basis. Further, of the
eleven cited petitions, only 2 pertained
to glazing that contained an incorrect
AS glazing type marking and are
potentially relevant to this petition. In
both the petition from General Motors,
LLC, (79 FR 23402, September 25, 2015)
and the petition from Mitsubishi Motors
North America, Inc. (80 FR 72482,
August 22, 2015), AS3 glazing was
marked as AS2 glazing. While the
petitions are similar to BMW’s, AS3
glazing and AS2 glazing have the same
impact protection requirements. The
analysis for this petition is different
because, as discussed above, AS4
glazing is required to meet two impact
tests that are not required for AS6
glazing.
Given that the windscreens in the
subject motorcycles meet all the
performance requirements as required
by FMVSS No. 205 and the improper
marking of the glazing presents no
recognizable safety risk, the Agency
finds that the subject glazing is
inconsequential to motor vehicle safety.
VII. NHTSA’s Decision
In consideration of the foregoing,
NHTSA finds that BMW has met its
burden of persuasion that the subject
FMVSS No. 205 noncompliance in the
affected vehicles is inconsequential to
motor vehicle safety. Accordingly,
BMW’s petition is hereby granted. BMW
is consequently exempted from the
obligation of providing notification of,
and a free remedy for, that
PO 00000
Frm 00238
Fmt 4703
Sfmt 4703
2983
noncompliance under 49 U.S.C. 30118
and 30120.
NHTSA notes that the statutory
provisions (49 U.S.C. 30118(d) and
30120(h)) that permit manufacturers to
file petitions for a determination of
inconsequentiality allow NHTSA to
exempt manufacturers only from the
duties found in sections 30118 and
30120, respectively, to notify owners,
purchasers, and dealers of a defect or
noncompliance and to remedy the
defect or noncompliance. Therefore, this
decision only applies to the subject
vehicles that BMW no longer controlled
at the time it determined that the
noncompliance existed. However, the
granting of this petition does not relieve
vehicle distributors and dealers of the
prohibitions on the sale, offer for sale,
or introduction or delivery for
introduction into interstate commerce of
the noncompliant vehicles under their
control after BMW notified them that
the subject noncompliance existed.
(Authority: 49 U.S.C. 30118, 30120:
delegations of authority at 49 CFR 1.95 and
501.8)
Otto G. Matheke III,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 2022–00869 Filed 1–18–22; 8:45 am]
BILLING CODE 4910–59–P
DEPARTMENT OF THE TREASURY
Agency Information Collection
Activities; Proposed Collection;
Comment Request; Small Business
Lending Fund Quarterly Supplemental
Report
Departmental Offices,
Department of the Treasury.
ACTION: Notice.
AGENCY:
The Department of the
Treasury, as part of its continuing effort
to reduce paperwork and respondent
burden, invites the general public and
other federal agencies to comment on
the proposed information collections
listed below, in accordance with the
Paperwork Reduction Act of 1995.
DATES: Written comments must be
received on or before March 21, 2022.
ADDRESSES: Send comments regarding
the burden estimate, or any other aspect
of the information collection, including
suggestions for reducing the burden, by
the following method:
• Federal E-rulemaking Portal: https://
www.regulations.gov. Follow the
instructions for submitting comments.
Refer to Docket Number TREAS–DO–
2022–0001 and the specific Office of
Management and Budget (OMB) control
number 1505–0228.
SUMMARY:
E:\FR\FM\19JAN1.SGM
19JAN1
2984
Federal Register / Vol. 87, No. 12 / Wednesday, January 19, 2022 / Notices
For
questions related to these programs,
please contact Steve Davidson by
emailing pra@treasury.gov, or calling
(202) 285–0346. Additionally, you can
view the information collection requests
at www.reginfo.gov.
SUPPLEMENTARY INFORMATION:
Title: Small Business Lending Fund
Quarterly Supplemental Report.
OMB Control Number: 1505–0228.
Type of Review: Extension of a
currently approved collection.
Description: Banks participating in
the Small Business Lending Fund
program are required to submit a
Supplemental Report each quarter. The
Supplemental Report is used to
determine the bank’s small business
lending baseline and allows Treasury to
assess the change in the small business
lending for the previous quarter.
Forms: TD F 102.3A, TD F 102.4.
Affected Public: Businesses and other
for-profits.
Estimated Number of Respondents:
56.
Frequency of Response: Quarterly.
Estimated Total Number of Annual
Responses: 224.
Estimated Time per Response: 3.5
hours.
Estimated Total Annual Burden
Hours: 784.
Request for Comments: Comments
submitted in response to this notice will
be summarized and included in the
request for Office of Management and
jspears on DSK121TN23PROD with NOTICES1
FOR FURTHER INFORMATION CONTACT:
VerDate Sep<11>2014
16:58 Jan 18, 2022
Jkt 256001
Budget approval. All comments will
become a matter of public record.
Comments are invited on: (a) Whether
the collection of information is
necessary for the proper performance of
the functions of the agency, including
whether the information shall have
practical utility; (b) the accuracy of the
agency’s estimate of the burden of the
collection of information; (c) ways to
enhance the quality, utility, and clarity
of the information to be collected; (d)
ways to minimize the burden of the
collection of information on
respondents, including through the use
of technology; and (e) estimates of
capital or start-up costs and costs of
operation, maintenance, and purchase
of services required to provide
information.
Authority: 44 U.S.C. 3501 et seq.
Dated: January 12, 2022.
Molly Stasko,
Treasury PRA Clearance Officer.
[FR Doc. 2022–00890 Filed 1–18–22; 8:45 am]
BILLING CODE 4810–AK–P
UNITED STATES INSTITUTE OF
PEACE
Notice of Board of Directors Meeting
United States Institute of Peace
(USIP) and Endowment of the United
States Institute of Peace.
ACTION: Announcement of meeting.
AGENCY:
PO 00000
Frm 00239
Fmt 4703
Sfmt 9990
Meeting of the Board of
Directors: Chair’s Report; Vice Chair’s
Report; President’s Report; Approval of
Minutes; USIP Key Current Initiatives:
Ethiopia; Afghanistan and Pakistan;
Strategic Stability; and Youth; Reports
from USIP Board Committees:
Governance and Compliance; Strategy
and Program; Audit and Finance;
Security and Facilities; and Talent and
Culture.
DATES: Friday, January 21, 2022 (10:00
a.m.–12:00 p.m.).
ADDRESSES: Virtual Board Meeting
Information: Join by video: Join
ZoomGov Meeting https://usiporg.zoomgov.com/j/1617695522?pwd=
dzMwNWFCbzJGZHlPOGZzUk15Tj
NBZz09; Meeting ID: 161 769 5522;
Passcode: 249160.
FOR FURTHER INFORMATION CONTACT:
Megan O’Hare, 202–429–4144, mohare@
usip.org.
SUPPLEMENTARY INFORMATION: Open
Session—Portions may be closed
pursuant to Subsection (c) of Section
552(b) of Title 5, United States Code, as
provided in subsection 1706(h)(3) of the
United States Institute of Peace Act,
Public Law 98–525.
Authority: 22 U.S.C. 4605(h)(3).
SUMMARY:
Dated: January 10, 2022.
Megan O’Hare,
Chief of Staff.
[FR Doc. 2022–00921 Filed 1–18–22; 8:45 am]
BILLING CODE 6820–AR–P
E:\FR\FM\19JAN1.SGM
19JAN1
Agencies
[Federal Register Volume 87, Number 12 (Wednesday, January 19, 2022)]
[Notices]
[Pages 2983-2984]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-00890]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF THE TREASURY
Agency Information Collection Activities; Proposed Collection;
Comment Request; Small Business Lending Fund Quarterly Supplemental
Report
AGENCY: Departmental Offices, Department of the Treasury.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Department of the Treasury, as part of its continuing
effort to reduce paperwork and respondent burden, invites the general
public and other federal agencies to comment on the proposed
information collections listed below, in accordance with the Paperwork
Reduction Act of 1995.
DATES: Written comments must be received on or before March 21, 2022.
ADDRESSES: Send comments regarding the burden estimate, or any other
aspect of the information collection, including suggestions for
reducing the burden, by the following method:
Federal E-rulemaking Portal: https://www.regulations.gov.
Follow the instructions for submitting comments. Refer to Docket Number
TREAS-DO-2022-0001 and the specific Office of Management and Budget
(OMB) control number 1505-0228.
[[Page 2984]]
FOR FURTHER INFORMATION CONTACT: For questions related to these
programs, please contact Steve Davidson by emailing [email protected],
or calling (202) 285-0346. Additionally, you can view the information
collection requests at www.reginfo.gov.
SUPPLEMENTARY INFORMATION:
Title: Small Business Lending Fund Quarterly Supplemental Report.
OMB Control Number: 1505-0228.
Type of Review: Extension of a currently approved collection.
Description: Banks participating in the Small Business Lending Fund
program are required to submit a Supplemental Report each quarter. The
Supplemental Report is used to determine the bank's small business
lending baseline and allows Treasury to assess the change in the small
business lending for the previous quarter.
Forms: TD F 102.3A, TD F 102.4.
Affected Public: Businesses and other for-profits.
Estimated Number of Respondents: 56.
Frequency of Response: Quarterly.
Estimated Total Number of Annual Responses: 224.
Estimated Time per Response: 3.5 hours.
Estimated Total Annual Burden Hours: 784.
Request for Comments: Comments submitted in response to this notice
will be summarized and included in the request for Office of Management
and Budget approval. All comments will become a matter of public
record. Comments are invited on: (a) Whether the collection of
information is necessary for the proper performance of the functions of
the agency, including whether the information shall have practical
utility; (b) the accuracy of the agency's estimate of the burden of the
collection of information; (c) ways to enhance the quality, utility,
and clarity of the information to be collected; (d) ways to minimize
the burden of the collection of information on respondents, including
through the use of technology; and (e) estimates of capital or start-up
costs and costs of operation, maintenance, and purchase of services
required to provide information.
Authority: 44 U.S.C. 3501 et seq.
Dated: January 12, 2022.
Molly Stasko,
Treasury PRA Clearance Officer.
[FR Doc. 2022-00890 Filed 1-18-22; 8:45 am]
BILLING CODE 4810-AK-P