Information Security Controls: Cybersecurity Items; Delay of Effective Date, 1670-1671 [2022-00448]
Download as PDF
<![CDATA[
1670
Federal Register / Vol. 87, No. 8 / Wednesday, January 12, 2022 / Rules and Regulations
develop on products identified in this
rulemaking action.
Regulatory Findings
The FAA has determined that this AD
will not have federalism implications
under Executive Order 13132. This AD
will not have a substantial direct effect
on the States, on the relationship
between the national government and
the States, or on the distribution of
power and responsibilities among the
various levels of government.
For the reasons discussed above, I
certify that this AD:
(1) Is not a ‘‘significant regulatory
action’’ under Executive Order 12866,
(2) Will not affect intrastate aviation
in Alaska, and
(3) Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
The Amendment
Accordingly, under the authority
delegated to me by the Administrator,
the FAA amends 14 CFR part 39 as
follows:
PART 39—AIRWORTHINESS
DIRECTIVES
[Amended]
2. The FAA amends § 39.13 by:
a. Removing Airworthiness Directive
2021–15–51, Amendment 39–21678 (86
FR 43406, August 9, 2021); and
■ b. Adding the following new
airworthiness directive:
■
■
FAA–2021–1003 Bell Textron Inc. (Type
Certificate Previously Held by Bell
Helicopter Textron Inc.): Amendment
39–21899; Docket No. FAA–2021–1003;
Project Identifier AD–2021–01141–R.
lotter on DSK11XQN23PROD with RULES1
(a) Effective Date
This airworthiness directive (AD) is
effective February 16, 2022.
(b) Affected ADs
This AD replaces AD 2021–15–51,
Amendment 39–21678 (86 FR 43406, August
9, 2021) (AD 2021–15–51).
(c) Applicability
This AD applies to Bell Textron Inc. (type
certificate previously held by Bell Helicopter
Textron Inc.) Model 204B, 205A, 205A–1,
205B, 210, and 212 helicopters, certificated
in any category, with an outboard main rotor
15:56 Jan 11, 2022
Jkt 256001
Joint Aircraft System Component (JASC)
Code: 6200, Main Rotor System.
This AD was prompted by a fatal accident
in which a pin sheared off during flight,
which resulted in the main rotor blade and
the main rotor head detaching from the
helicopter. The FAA is issuing this AD to
address this unsafe condition and prevent
loss of control of the helicopter.
Comply with this AD within the
compliance times specified, unless already
done.
(g) Required Actions
(1) For Model 204B, 205A, 205A–1, 205B,
and 212 helicopters:
(i) Before further flight from August 24,
2021 (the effective date of AD 2021–15–51),
remove from service any pin that is identified
in paragraph (c) of this AD.
(ii) After August 24, 2021 (the effective
date of AD 2021–15–51), do not install any
pin that is identified in paragraph (c) of this
AD on any helicopter.
(2) For Model 210 helicopters:
(i) Before further flight after the effective
date of this AD, remove from service any pin
that is identified in paragraph (c) of this AD.
(ii) As of the effective date of this AD, do
not install any pin that is identified in
paragraph (c) of this AD on any helicopter.
(i) Alternative Methods of Compliance
(AMOCs)
(1) The Manager, DSCO Branch,
Compliance & Airworthiness Division, FAA,
has the authority to approve AMOCs for this
AD, if requested using the procedures found
in 14 CFR 39.19. In accordance with 14 CFR
39.19, send your request to your principal
inspector or local Flight Standards District
Office, as appropriate. If sending information
directly to the manager of the DSCO Branch,
send it to the attention of the person
identified in paragraph (j) of this AD.
Information may be emailed to: 9-ASW-190COS@faa.gov.
(2) Before using any approved AMOC,
notify your appropriate principal inspector,
or lacking a principal inspector, the manager
of the local flight standards district office/
certificate holding district office.
(j) Related Information
For more information about this AD,
contact David Wilson, Aerospace Engineer,
DSCO Branch, Compliance & Airworthiness
Division, FAA, 10101 Hillwood Pkwy., Fort
Worth, TX 76177; telephone (817) 222–5786;
email david.wilson@faa.gov.
(k) Material Incorporated by Reference
None.
Frm 00014
Fmt 4700
[FR Doc. 2022–00351 Filed 1–11–22; 8:45 am]
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Parts 740, 772, and 774
[Docket No. 220105–0004]
(f) Compliance
PO 00000
Issued on January 4, 2022.
Ross Landes,
Deputy Director for Regulatory Operations,
Compliance & Airworthiness Division,
Aircraft Certification Service.
BILLING CODE 4910–13–P
(e) Unsafe Condition
Special flight permits are prohibited.
Authority: 49 U.S.C. 106(g), 40113, 44701.
VerDate Sep<11>2014
(d) Subject
(h) Special Flight Permits
1. The authority citation for part 39
continues to read as follows:
■
§ 39.13
hub strap pin (pin) part number 204–012–
104–005 with a serial number prefix ‘‘FNFS’’
installed.
Sfmt 4700
RIN 0694–AH56
Information Security Controls:
Cybersecurity Items; Delay of Effective
Date
Bureau of Industry and
Security, Commerce.
ACTION: Interim final rule; delay of
effective date.
AGENCY:
On October 21, 2021, the
Bureau of Industry and Security (BIS)
published an interim final rule that
establishes new controls on certain
cybersecurity items for National
Security (NS) and Anti-terrorism (AT)
reasons, along with a new License
Exception, Authorized Cybersecurity
Exports (ACE), that authorizes exports
of these items to most destinations
except in the circumstances described
in that rule. That rule was published
with a 45-day comment period, which
ended on December 12, 2021, and a 90day delayed effective date (January 19,
2022). This rule delays the effective date
of the interim final rule by 45 days.
DATES: As of January 12, 2022, the
effective date for the interim final rule
published October 21, 2021, at 86 FR
58205, is delayed to March 7, 2022.
FOR FURTHER INFORMATION CONTACT: For
questions regarding the Export Control
Classification Numbers (ECCNs)
included in this rule or License
Exception ACE, contact Aaron
Amundson at 202–482–0707 or email
Aaron.Amundson@bis.doc.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:
Background
In response to the interim final rule
published on October 21, 2021 (86 FR
58205), which implements new controls
on certain cybersecurity items for
National Security (NS) and Antiterrorism (AT) reasons, along with a
new License Exception, Authorized
Cybersecurity Exports (ACE), BIS
received twelve comments before the
end of the comment period on
December 12, 2021. The submitted
E:\FR\FM\12JAR1.SGM
12JAR1
1671
Federal Register / Vol. 87, No. 8 / Wednesday, January 12, 2022 / Rules and Regulations
comments are posted at regulations.gov
under ID BIS–2020–0038. Based on
issues raised by some of the public
comments, BIS may consider some
modifications for the final rule. Some of
the comments described the necessary
compliance measures that industry
would have to complete to comply with
the October 21, 2021 rule and, on that
basis, requested that BIS delay the rule’s
effective date in order to allow industry
sufficient time to update the requisite
compliance procedures and for BIS to
provide additional public guidance. BIS
agrees that it is important to allow
enough time for industry to implement
the compliance measures and
procedures necessary to comply with
the published interim final rule, as well
as for BIS to provide the public with
additional guidance. Therefore, BIS is
delaying the effective date of the
October 21, 2021 interim final rule by
45 days, to March 7, 2022. This action
does not extend or reopen the comment
period for BIS’s previous request for
comments on the interim final rule.
Export Control Reform Act of 2018
On August 13, 2018, the President
signed into law the John S. McCain
National Defense Authorization Act for
Fiscal Year 2019, which included the
Export Control Reform Act of 2018
(ECRA), 50 U.S.C. Sections 4801–4852.
ECRA provides the legal basis for BIS’s
principal authorities and serves as the
authority under which BIS issues this
action.
Thea D. Rozman Kendler,
Assistant Secretary for Export
Administration.
[FR Doc. 2022–00448 Filed 1–11–22; 8:45 am]
BILLING CODE 3510–33–P
DEPARTMENT OF THE INTERIOR
Office of Natural Resources Revenue
30 CFR Part 1241
[Docket No. ONRR–2021–0002; DS63644000
DRT000000.CH7000 223D1113RT]
RIN 1012–AA31
2022 Civil Monetary Penalty Inflation
Adjustments
Office of Natural Resources
Revenue (‘‘ONRR’’), Interior.
ACTION: Final rule.
AGENCY:
ONRR is adjusting for
inflation the civil monetary penalty
(‘‘CMP’’) amounts it assesses under the
Federal Oil and Gas Royalty
Management Act of 1982 (‘‘FOGRMA’’).
DATES: This rule is effective on January
12, 2022.
FOR FURTHER INFORMATION CONTACT: For
questions on procedural issues, contact
Luis Aguilar, Regulatory Specialist, by
telephone at (303) 231–3148 or email to
ONRR_RegulationsMailbox@onrr.gov.
For questions on technical issues,
contact Michael Marchetti, Enforcement
Program Manager, by telephone at (303)
231–3125 or email to
Michael.Marchetti@onrr.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:
I. Background
II. ONRR’s Inflation-Adjusted Maximum
Rates
III. Procedural Matters
A. Regulatory Planning and Review
(Executive Orders 12866 and 13563)
B. Regulatory Flexibility Act
C. Small Business Regulatory Enforcement
Fairness Act
D. Unfunded Mandates Reform Act
E. Takings (Executive Order 12630)
F. Federalism (Executive Order 13132)
G. Civil Justice Reform (Executive Order
12988)
H. Consultation With Indian Tribes
(Executive Order 13175)
I. Paperwork Reduction Act
J. National Environmental Policy Act
K. Effects on the Energy Supply (Executive
Order 13211)
L. Clarity of This Regulation
M. Administrative Procedure Act
lotter on DSK11XQN23PROD with RULES1
I. Background
The Secretary of the Interior
(‘‘Secretary’’) is authorized, under 30
U.S.C. 1719(a)–(d), to assess CMPs for
royalty reporting and other violations.
Pursuant to authority delegated to it by
the Secretary, ONRR published
regulations at 30 CFR part 1241
implementing the Secretary’s CMP
authority. The Federal Civil Penalties
Inflation Adjustment Act of 1990, as
amended by the Federal Civil Penalties
Inflation Adjustment Act Improvements
Act of 2015 (Pub. L. 114–74) (the ‘‘2015
Act’’) (collectively referred to herein as
the ‘‘Inflation Adjustment Acts’’) require
Federal agencies to publish annual CMP
inflation adjustments in the Federal
Register by January 15th of each year.
The Inflation Adjustment Acts and
Office of Management and Budget
(‘‘OMB’’) Memorandum No. M–22–07,
Implementation of Penalty Inflation
Adjustments for 2022, Pursuant to the
Federal Civil Penalties Inflation
Adjustment Act Improvements Act of
2015, December 15, 2021 (‘‘OMB
Memorandum’’) specify that, for
purposes of this rule, the annual
inflation adjustments are based on the
percent change between the Consumer
Price Index for all Urban Consumers
(‘‘CPI–U’’) published by the Department
of Labor for October 2021 (October of
the year in which ONRR’s last CMP
adjustment was published), and October
2020. The OMB Memorandum further
specifies that the cost-of-living
adjustment multiplier for 2022, not
seasonally adjusted, is 1.06222 for CY
2022 (the October 2021 CPI–U (276.589)
divided by the October 2020 CPI–U
(260.388) = 1.06222). ONRR used this
guidance to calculate required inflation
adjustments. Pursuant to the Inflation
Adjustment Acts and OMB
Memorandum, any increases in CMPs
are rounded to the nearest whole dollar
and the new maximum penalty rates
apply to CMPs assessed after the date
the increase takes effect.
II. ONRR’s Inflation-Adjusted
Maximum Rates
This final rule increases the
maximum CMP dollar amounts for each
of the four violation categories
identified in 30 U.S.C. 1719(a)–(d) and
implemented by 30 CFR part 1241. The
following table identifies the applicable
ONRR regulations, the dollar amounts
set forth in the regulations, and the
adjusted amounts.
Current
maximum
penalty
30 CFR citation
1241.52(a)(2) ...............................................................................................................................
1241.52(b) ....................................................................................................................................
1241.60(b)(1) ...............................................................................................................................
VerDate Sep<11>2014
15:56 Jan 11, 2022
Jkt 256001
PO 00000
Frm 00015
Fmt 4700
Sfmt 4700
E:\FR\FM\12JAR1.SGM
$1,288
12,891
25,780
12JAR1
2022
Inflation
adjustment
multiplier
1.06222
1.06222
1.06222
2022
Adjusted
maximum
penalty
$1,368
13,693
27,384
]]>Agencies
[Federal Register Volume 87, Number 8 (Wednesday, January 12, 2022)]
[Rules and Regulations]
[Pages 1670-1671]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-00448]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Parts 740, 772, and 774
[Docket No. 220105-0004]
RIN 0694-AH56
Information Security Controls: Cybersecurity Items; Delay of
Effective Date
AGENCY: Bureau of Industry and Security, Commerce.
ACTION: Interim final rule; delay of effective date.
-----------------------------------------------------------------------
SUMMARY: On October 21, 2021, the Bureau of Industry and Security (BIS)
published an interim final rule that establishes new controls on
certain cybersecurity items for National Security (NS) and Anti-
terrorism (AT) reasons, along with a new License Exception, Authorized
Cybersecurity Exports (ACE), that authorizes exports of these items to
most destinations except in the circumstances described in that rule.
That rule was published with a 45-day comment period, which ended on
December 12, 2021, and a 90-day delayed effective date (January 19,
2022). This rule delays the effective date of the interim final rule by
45 days.
DATES: As of January 12, 2022, the effective date for the interim final
rule published October 21, 2021, at 86 FR 58205, is delayed to March 7,
2022.
FOR FURTHER INFORMATION CONTACT: For questions regarding the Export
Control Classification Numbers (ECCNs) included in this rule or License
Exception ACE, contact Aaron Amundson at 202-482-0707 or email
[email protected].
SUPPLEMENTARY INFORMATION:
Background
In response to the interim final rule published on October 21, 2021
(86 FR 58205), which implements new controls on certain cybersecurity
items for National Security (NS) and Anti-terrorism (AT) reasons, along
with a new License Exception, Authorized Cybersecurity Exports (ACE),
BIS received twelve comments before the end of the comment period on
December 12, 2021. The submitted
[[Page 1671]]
comments are posted at regulations.gov under ID BIS-2020-0038. Based on
issues raised by some of the public comments, BIS may consider some
modifications for the final rule. Some of the comments described the
necessary compliance measures that industry would have to complete to
comply with the October 21, 2021 rule and, on that basis, requested
that BIS delay the rule's effective date in order to allow industry
sufficient time to update the requisite compliance procedures and for
BIS to provide additional public guidance. BIS agrees that it is
important to allow enough time for industry to implement the compliance
measures and procedures necessary to comply with the published interim
final rule, as well as for BIS to provide the public with additional
guidance. Therefore, BIS is delaying the effective date of the October
21, 2021 interim final rule by 45 days, to March 7, 2022. This action
does not extend or reopen the comment period for BIS's previous request
for comments on the interim final rule.
Export Control Reform Act of 2018
On August 13, 2018, the President signed into law the John S.
McCain National Defense Authorization Act for Fiscal Year 2019, which
included the Export Control Reform Act of 2018 (ECRA), 50 U.S.C.
Sections 4801-4852. ECRA provides the legal basis for BIS's principal
authorities and serves as the authority under which BIS issues this
action.
Thea D. Rozman Kendler,
Assistant Secretary for Export Administration.
[FR Doc. 2022-00448 Filed 1-11-22; 8:45 am]
BILLING CODE 3510-33-P
