Certain New Chemicals; Receipt and Status Information for August 2021, 52899-52903 [2021-20606]
Download as PDF
<![CDATA[
lotter on DSK11XQN23PROD with NOTICES1
Federal Register / Vol. 86, No. 182 / Thursday, September 23, 2021 / Notices
III. Description of Programs and
Potential Disclosure of Information
Claimed as CBI to Contractor and
Subcontractors
The EPA’s OECA has responsibility
for protecting public health and the
environment by enforcing standards for
air pollution. In order to implement
various CAA and APPS programs,
OECA collects compliance reports and
other information from the regulated
industry. Occasionally, the information
submitted to, or obtained by, the EPA is
claimed to be CBI by persons submitting
data to the EPA. Information submitted
under such a claim is handled in
accordance with the EPA’s regulations
at 40 CFR part 2, subpart B, and in
accordance with the EPA procedures
that are consistent with those
regulations. When the EPA has
determined that disclosure of
information claimed as CBI to EPA
contractors or subcontractors is
necessary, the corresponding contract
must address the appropriate use and
handling of the information by the EPA
contractor and subcontractors and the
EPA contractor and subcontractors must
require its personnel who require access
to information claimed as CBI to sign
written non-disclosure agreements
before they are granted access to data.
In accordance with 40 CFR 2.301(h),
the EPA has determined that EPA
contractor Eastern Research Group,
Incorporated (ERG), 14555 Avion
Parkway, Suite 200, Chantilly, VA
20151, and ERG subcontractors PG
Environmental, LLC; Aleksandrich
Compliance & Engineering Services,
LLC; Clearstone Engineering Ltd.;
Process Profiles; and Matrix New World
Engineering (collectively referred to as
‘‘subcontractors’’ in this notice) require
access to CBI submitted to the EPA
under Section 114 of the CAA, Section
208 of the CAA, and the APPS for the
work they perform under Contract
Number 68HERC21D0007. We are
providing notice and an opportunity to
comment on their access to information
claimed as CBI. We are issuing this
Federal Register notice to inform all
affected submitters that we plan to grant
access to material that may be claimed
as CBI to ERG and its subcontractors on
a need-to-know basis.
Under Contract Number
68HERC21D0007, ERG provides
enforcement support for the EPA’s
regulatory and enforcement activities,
including field inspections,
investigations, audits, and other CAA
regulatory and enforcement support that
involve access to information claimed as
CBI. ERG also employs subcontractors,
who support these activities, under the
VerDate Sep<11>2014
17:19 Sep 22, 2021
Jkt 253001
above-listed contract. ERG and its
subcontractors require access to
information claimed as CBI to support
EPA enforcement activities described
above. Access to data, including
information claimed as CBI, will
commence six days after the date of
publication of this notice in the Federal
Register, and will continue until March
9, 2026. If the contract and associated
subcontracts are extended, this access
will continue for the remainder of the
ERG contract without further notice. If
the contract expires prior to March 9,
2026, the access will cease at that time.
If ERG employs additional
subcontractors to support the EPA on a
regular basis or on a limited or one-time
basis under the above-listed contract,
and those subcontractors require access
to CBI, the EPA will notify affected
companies of the contemplated
disclosure and provide them with an
opportunity to comment by either
sending them a letter or by publishing
an additional notice in the Federal
Register.
Parties who wish to obtain further
information about this Federal Register
notice, or about OECA’s disclosure of
information claimed as CBI to ERG and
its subcontractors, may contact the
person listed under FOR FURTHER
INFORMATION CONTACT.
Dated: September 15, 2021.
Evan Belser,
Acting Director, Air Enforcement Division.
[FR Doc. 2021–20560 Filed 9–22–21; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2021–0068; FRL–8732–03–
OCSPP]
Certain New Chemicals; Receipt and
Status Information for August 2021
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA) to
make information publicly available and
to publish information in the Federal
Register pertaining to submissions
under TSCA, including notice of receipt
of a Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
SUMMARY:
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
52899
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 08/01/2021 to
08/31/2021.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
October 25, 2021.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2021–0068
and the specific case number for the
chemical substance related to your
comment, using the Federal
eRulemaking Portal at https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Additional
instructions on commenting or visiting
the docket, along with more information
about dockets generally, is available at
https://www.epa.gov/dockets.
Due to the public health concerns
related to COVID–19, the EPA Docket
Center (EPA/DC) and Reading Room is
closed to visitors with limited
exceptions. The staff continues to
provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, Project Management and
Operations Division (MC 7407M), Office
of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
08/01/2021 to 08/31/2021. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
E:\FR\FM\23SEN1.SGM
23SEN1
lotter on DSK11XQN23PROD with NOTICES1
52900
Federal Register / Vol. 86, No. 182 / Thursday, September 23, 2021 / Notices
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
B. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
a chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
VerDate Sep<11>2014
17:19 Sep 22, 2021
Jkt 253001
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
PO 00000
Frm 00029
Fmt 4703
Sfmt 4703
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
E:\FR\FM\23SEN1.SGM
23SEN1
Federal Register / Vol. 86, No. 182 / Thursday, September 23, 2021 / Notices
52901
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2021 TO 08/31/2021
lotter on DSK11XQN23PROD with NOTICES1
Case No.
Version
Received date
Manufacturer
Use
Chemical substance
(G) Gas scrubbing landfill
deoderizing.
(G) Gas scrubbing, wastewater deoderizing.
(G) Chemical Intermediate ...
P–18–0289A ...........
11
08/19/2021
Guard Products .....
P–18–0290A ...........
11
08/19/2021
Guard Products .....
P–18–0326A ...........
11
08/03/2021
CBI ........................
P–20–0058A ...........
8
08/04/2021
CBI ........................
P–21–0003A ...........
4
08/30/2021
CBI ........................
P–21–0049A ...........
3
08/06/2021
CBI ........................
(G) Monomer ........................
P–21–0049A ...........
4
08/13/2021
CBI ........................
(G) Monomer ........................
P–21–0050A ...........
P–21–0050A ...........
P–21–0056A ...........
3
4
3
08/06/2021
08/13/2021
08/19/2021
CBI ........................
CBI ........................
CBI ........................
(G) Monomer ........................
(G) Monomer ........................
(G) Component of coatings ..
P–21–0057A ...........
3
08/19/2021
CBI ........................
(G) Component in coatings ..
P–21–0058A ...........
3
08/19/2021
CBI ........................
(G) Component in coatings ..
P–21–0060A ...........
4
08/19/2021
CBI ........................
(G) Isolated intermediate ......
P–21–0061A ...........
4
08/19/2021
CBI ........................
(G) Component in coatings ..
P–21–0062A ...........
4
08/19/2021
CBI ........................
(G) Component in coatings ..
P–21–0078A ...........
3
08/25/2021
Pinova, Inc. ...........
P–21–0098A ...........
4
08/26/2021
Hubergroup ...........
(S) Tackifying additive used
in tire manufacture;
Tackifying additive used in
hot melt adhesive applications (e.g., pressure sensitive adhesives, and
graphic art applications
such as bookbinding, magazine manufacture, and
label making).
(S) Co-initiator for the curing
of UV printing inks.
P–21–0100A ...........
2
08/17/2021
ENI Trading &
Shipping Inc.
P–21–0168A ...........
2
08/10/2021
CBI ........................
(G) Used as a lubricant and
lubricant additive (used in
closed systems; non-dispersive use); Lubricant
and lubricant additive
(used in closed systems;
non-dispersive use).
(G) Colorant ..........................
P–21–0178 ..............
2
08/19/2021
CBI ........................
(G) Coating additive .............
P–21–0179 ..............
2
08/19/2021
CBI ........................
(G) Coating additive .............
P–21–0199 ..............
2
08/12/2021
(G) Processing aid ...............
P–21–0199A ...........
3
08/18/2021
Avery Dennison
Mill Hall.
CBI ........................
(G) Metal, [heteropolycyclic]-, [[[(hydroxyalkyl)
amino]sulfonyl]alkyl]sulfonyl(sulfoalkyl)sulfonyl derivs., ammonium sodium salts.
(G) Bisphenol A, polymer with aminoalkylalkylaminoalkylalkyl-poly[(oxy-alkyl-alkanepolyol)], haloalkylepoxide, epoxy-epoxyalkoxy-poly[(oxy-alkylalkanepolyol)], sulfur-based salt.
(G) Substituted-alkanoic acid, compd. with
aminoalkylalkyl-aminoalkylalkyl-poly[(oxy-alkylalkanepolyol)] polymer with haloalkyl-epoxide, bisphenol
A,epoxy-epoxyalkoxy-poly[(oxy-alkyl-alkanepolyol)].
(G) 1,6-Disubstituted hexane.
(G) Processing aid ...............
(G) 1,6-Disubstituted hexane.
VerDate Sep<11>2014
17:19 Sep 22, 2021
Jkt 253001
PO 00000
Frm 00030
(G) Additive for automatic
dishwashing; Additive for
hard surface cleaner.
(G) Polymeric film former for
coatings.
Fmt 4703
Sfmt 4703
(G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
(G) Carbomonocylic-oxazolidine.
(G) Alkanoic acid, alkyl ester, manuf. of, byproducts from,
distn. residues.
(G) Polysaccharide, polymer with unsaturated carboxylic
acid and methacryloxyethyltrimethyl ammonium chloride, sodium salt, acid salt initiated.
(G) 4, 4 methylenebis (2, 6 dimethyl phenol) polymer with
2-(chloromethyl) oxirane, 1,4-benzene diol, 2-methyl-2propenoic acid, mixed alkyl substituted 2-methyl 2propenoate, and ethyl 2-propenoate, reaction products
with 2-(dimthylamino) ethanol.
(G) Alkanoic acid, polyhalo-(halo-oxo-alkenyl)oxyalkyl
ester.
(G) Alkanoic acid, polyhalo-(halo-oxo-alkenyl)oxyalkyl
ester.
(G) Alkenoic acid, halo-polylhaloalkyl ester.
(G) Alkenoic acid, halo-polylhaloalkyl ester.
(G) Isocyanic acid, polyalkylenepolyarylene ester, polymer
with alkyl-hydroxyalkyl-alkanediol, alkoxyalcohol and
alkoxylalkoxyalcohol-blocked.
(G) Sulfur based acid, compound with aminoalkylalkylaminoalkylalkoxy-polyoxyalkylalkanediyl, polymer with
haloalkyl-epoxide and alkylalkylidene-cycloarylalcohol.
(G) Substituted alkanoic acid, compound with
aminoalkylalkyl-aminoalkylalkoxy-polyoxyalkylalkanediyl,
polymer with haloalkyl-epoxide and alkylalkylidenecycloarylalcohol.
(G) Bisphenol A epichlorohydrin polymer with
alkylpolyalkene-polyarylene-hydroxypolyoxyalkyldiyl reaction products with alkylalkylidene-alkylalkylideneaminoalkyl-alkanepolyamine and alkylaminoalkanol.
(G) Sulfur based acid, compds. with modified bisphenol Aepichlorohydrin-polyalkylene polyol ether with bisphenol
A polymer-N-dialkylalkylidene-N(dialkylalklyidene)aminoalkyl-alkanepolyaminealkylaminoalkanol reaction products.
(G) Substituted-alkanoic acid, compds. with modified
bisphenol A-epichlorohydrin-polyalkylene polyol ether
with bisphenol A polymer-N-dialkylalkylidene-Ndialkylalkylideneaminoalkyl-alkanepolyaminealkylaminoalkanol reaction products.
(G) Phenol, polymer with alkyl-(alkylalkylenyl)cyclohexene,
mixed dialkylcyclohexadienes, mixed alkyl(alkylalkylidene)cyclohexenes and 3,7,7trimethylbicyclo[4.1.0]hept-3-ene.
(G) Poly(oxy-1,2-ethanediyl), alpha-hydro-omega-[2(or 3)[[substituted benzoyl]oxy]hydroxypropoxyl]-, alpha,
alpha′, alpha″ -ether with 2-ethyl-2-(hydroxymethyl)-1,3propanediol (3:1).
(G) Raffinates (petroleum), vacuum distillate solvent, solvent-dewaxed, hydrotreated.
E:\FR\FM\23SEN1.SGM
23SEN1
52902
Federal Register / Vol. 86, No. 182 / Thursday, September 23, 2021 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2021 TO 08/31/2021—Continued
Manufacturer
Use
P–21–0200 ..............
Case No.
Version
1
Received date
08/02/2021
CBI ........................
(G) Printing additive .............
Chemical substance
P–21–0202 ..............
1
08/04/2021
CBI ........................
P–21–0203 ..............
3
08/10/2021
CBI ........................
P–21–0204 ..............
1
08/12/2021
CBI ........................
P–21–0205 ..............
1
08/13/2021
CBI ........................
P–21–0206 ..............
1
08/13/2021
P–21–0207 ..............
2
08/18/2021
HollyFrontier Corporation.
CBI ........................
P–21–0208 ..............
1
08/17/2021
CBI ........................
(G) Adhesive for profile
wrapping.
P–21–0209 ..............
1
08/17/2021
CBI ........................
(G) Adhesive for profile
wrapping.
P–21–0210 ..............
1
08/17/2021
CBI ........................
(G) Adhesive for profile
wrapping.
SN–21–0006 ...........
2
08/27/2021
Carbice .................
(S) For heat transfer, heat
storage, thermal emission,
and general temperature
management in heat-generating systems such as
electronics; Gap filling or
sealing of opposing interfaces; For light absorption
properties; To improve
mechanical properties or
electrical conductiveness
of other materials or products.
(G) Saturated and unsaturated hydrocarbon waxes,
oxidized, polymers with alkenoic acid, alkyl alkanoate,
alkenedioic acid, polyalkylene glycol ether with substituted carbomonocycle (alkylidene)bis-, polyalkylene
glycol ether with substituted carbomonocycle
(alkylidene)bis-, substituted carbomonocycle,
disubstituted carbomonocycle and substituted
heteropolycycle, alkyl peroxide-initiated.
(G) An ingredient used in the (G) Sulfonium, carbomonocycle
manufacture of photoresist.
bis[(trihaloalkyl)carbomonocycle], substituted
carbomonocyclic ester.
(G) Surfactant will be used in (G) Glycolipids, sophorose-contg., Starmerella bomicolavarious applications in oil
fermented, from sugar and vegetable oils.
and gas industry.
(G) Photolithography ............ (G) Sulfonium, bis(3,4-polyhalocarbocyclic)aryl-, alpha,
alpha, beta, beta-polyhalopolyhydro-2,2-diaryl-4,7methano-1,3-heteropolycyclic-5-alkanesulfonate (1:1).
(G) Additive in household
(S) Benzene, [2-[(2-methyl-1-undecen-1-yl}oxy]ethyl]-.
consumer products.
(G) Component of gasoline .. (G) Alkanes, branched and linear.
(G) Emulsifier .......................
(G) Fatty alcohol ethoxylate, ethercarboxylate Branched
and Linear, Fatty alcohol ethoxylate, ethercarboxylate.
(G) Aromatic diacids, polymer with alkyldiacids, alkyldiols,
benzofurandione, caprolactone and 1,1′-methylenebis[4isocyanatobenzene].
(G) Aromatic diacid, polymer with alkyldiacid, alkyldiols,
polypropylene glycol, benzofurandione, caprolactone
and 1,1′-methylenebis[4-isocyanatobenzene].
(G) Aromatic diacids, polymer with alkyldiacids, alkyldiols,
benzofurandione, polypropylene, alkylhydroxyacid
glycolester, caprolactone and 1,1′-methylenebis[4isocyanatobenzene].
(S) Multiwalled carbon nanotubes grown perpendicularly
on an aluminum foil substrate using Fe catalyst.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 08/01/2021 TO 08/31/2021
Received date
Commencement
date
If amendment, type
of
amendment
P–08–0246 ............
08/04/2021
06/13/2021
N ...........................
P–10–0495 ............
08/20/2021
07/29/2021
N ...........................
P–11–0242 ............
P–15–0607 ............
08/03/2021
08/07/2021
07/09/2021
07/26/2021
N ...........................
N ...........................
P–17–0343A ..........
08/19/2021
04/09/2018
P–18–0267 ............
08/24/2021
08/23/2021
Updated generic
name.
N ...........................
P–19–0028 ............
08/18/2021
08/05/2021
N ...........................
lotter on DSK11XQN23PROD with NOTICES1
Case No.
VerDate Sep<11>2014
17:19 Sep 22, 2021
Jkt 253001
PO 00000
Frm 00031
Fmt 4703
Chemical substance
(S) Fatty acids, C8–10, mixed tetraesters with heptanoic acid,
pentaerythritol, 3,5,5-trimethylhexanoic acid and valeric acid.
(G) Poly(oxy-1,2-ethanediyl),. alpha., -monoalkyl ethers.omega.-mono (hydrogen maleate)-.
(G) Hydroxy-olefin.
(G) 1,2,4,5,7,8-hexoxonane,3,6,9-trimethyl-,3,6,9-tris(alkyl)
derivs.
(G) Modified benzimidazole salt.
(G) Branched alkanoic acid, epoxy ester, reaction products with
monocyclicdialkanamine and polycyclic dialkanol ether polymer.
(G) Alkyl salicylate, metal salts.
Sfmt 4703
E:\FR\FM\23SEN1.SGM
23SEN1
Federal Register / Vol. 86, No. 182 / Thursday, September 23, 2021 / Notices
52903
TABLE II—NOCS APPROVED * FROM 08/01/2021 TO 08/31/2021—Continued
Received date
Commencement
date
If amendment, type
of
amendment
P–21–0051 ............
08/25/2021
08/24/2021
N ...........................
P–21–0065 ............
08/13/2021
08/12/2021
N ...........................
P–21–0103 ............
08/05/2021
08/02/2021
N ...........................
Case No.
Chemical substance
(S) Fatty acids, C18-unsatd., dimers, hydrogenated, polymers
with 2-hydroxyethyl-terminated hydrogenated polybutadiene,
bis(2,5-dihydro-2,5-dioxo-1h-pyrrole-1-hexanoate).
(G) Alkenoic acid, reaction products with alkylamine-alkanediyl
diacrylate polymer and [oxybis(alkylene)]bis[alkyl-alkanediol].
(S) Urea, N-[3-[[(4-methylphenyl)sulfonyl]oxy]phenyl]-N’-phenyl-.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 08/01/2021 TO 08/31/2021
Case No.
Received date
P–14–0712 ........
08/03/2021
P–18–0293 ........
08/02/2021
P–21–0144 ........
P–21–0148 ........
08/16/2021
08/16/2021
Type of test information
Quarterly PCDD/F Test of PMN Substance using
EPA Test Method 8290A.
Assessment of Acute Inhalation Toxicity with
Dihexylmethylenemalonate in Wistar Han Rat
(Nose Only) Study.
Composition Data .......................................................
Composition Data .......................................................
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 17, 2021.
Pamela Myrick,
Director, Project Management and Operations
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2021–20606 Filed 9–22–21; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
lotter on DSK11XQN23PROD with NOTICES1
[EPA–HQ–SFUND–2013–0549; FRL–8932–
01–OLEM]
Proposed Information Collection
Request; Comment Request:
Information Collection Request
Submitted to OMB for Review and
Approval; Notification of Episodic
Releases of Oil and Hazardous
Substances (Renewal) EPA ICR
Number 1049.15, OMB Control Number
2050–0046
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
VerDate Sep<11>2014
17:19 Sep 22, 2021
Chemical substance
Jkt 253001
(G) Plastics, wastes, pyrolyzed, bulk pyrolysate.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl
ester.
(G) Naphtha, heavy catalytic cracked.
(G) Naphtha, light catalytic cracked.
The Environmental Protection
Agency is planning to submit an
information collection request (ICR),
Notification of Episodic Releases of Oil
and Hazardous Substances (Renewal)
(EPA ICR Number 1049.15, OMB
Control Number 2050–0046) to the
Office of Management and Budget
(OMB) for review and approval in
accordance with the Paperwork
Reduction Act. Before doing so, EPA is
soliciting public comments on specific
aspects of the proposed information
collection as described in
SUPPLEMENTARY INFORMATION. This is a
proposed extension of the ICR, which is
currently approved through May 31,
2022. An agency may not conduct or
sponsor and a person is not required to
respond to a collection of information
unless it displays a currently valid OMB
control number.
DATES: Comments must be submitted on
or before November 22, 2021.
ADDRESSES: Submit your comments,
referencing Docket ID No. EPA–HQ–
SFUND–2013–0549, to: (1) EPA online
using www.regulations.gov (our
preferred method) or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave., NW,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
SUMMARY:
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Wendy Hoffman, Office of Emergency
Management, Mail Code 5104A,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460; telephone number: (202) 564–
8794; email address: hoffman.wendy@
epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents which explain in
detail the information that EPA will be
collecting are available in the public
docket for this ICR. The docket can be
viewed online at https://
www.regulations.gov. Out of an
abundance of caution for members of
the public and our staff, the EPA Docket
Center and Reading Room is closed to
the public, with limited exceptions, to
reduce the risk of transmitting COVID–
19. Our Docket Center staff will
continue to provide remote customer
service via email, phone, and webform.
For further information about the EPA’s
public docket, Docket Center services
and the current status, please visit us
online at https://www.epa.gov/dockets.
E:\FR\FM\23SEN1.SGM
23SEN1
]]>Agencies
[Federal Register Volume 86, Number 182 (Thursday, September 23, 2021)]
[Notices]
[Pages 52899-52903]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-20606]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2021-0068; FRL-8732-03-OCSPP]
Certain New Chemicals; Receipt and Status Information for August
2021
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to make information publicly available and to publish information in
the Federal Register pertaining to submissions under TSCA, including
notice of receipt of a Premanufacture notice (PMN), Significant New Use
Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including
an amended notice or test information; an exemption application
(Biotech exemption); an application for a test marketing exemption
(TME), both pending and/or concluded; a notice of commencement (NOC) of
manufacture (including import) for new chemical substances; and a
periodic status report on new chemical substances that are currently
under EPA review or have recently concluded review. This document
covers the period from 08/01/2021 to 08/31/2021.
DATES: Comments identified by the specific case number provided in this
document must be received on or before October 25, 2021.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2021-0068 and the specific case number for the
chemical substance related to your comment, using the Federal
eRulemaking Portal at https://www.regulations.gov. Follow the online
instructions for submitting comments. Do not submit electronically any
information you consider to be Confidential Business Information (CBI)
or other information whose disclosure is restricted by statute.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
Due to the public health concerns related to COVID-19, the EPA
Docket Center (EPA/DC) and Reading Room is closed to visitors with
limited exceptions. The staff continues to provide remote customer
service via email, phone, and webform. For the latest status
information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Project Management and Operations Division (MC 7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 08/01/2021 to 08/31/2021. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR
[[Page 52900]]
part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on new chemical substances that are currently under EPA review or have
recently concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
[[Page 52901]]
Table I--PMN/SNUN/MCANs Approved * From 08/01/2021 to 08/31/2021
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-18-0289A.......................... 11 08/19/2021 Guard Products......... (G) Gas scrubbing (G) 2-
landfill deoderizing. (2(methylcaboxymonocyclic)amino)etho
xy)-alcohol.
P-18-0290A.......................... 11 08/19/2021 Guard Products......... (G) Gas scrubbing, (G) Carbomonocylic-oxazolidine.
wastewater
deoderizing.
P-18-0326A.......................... 11 08/03/2021 CBI.................... (G) Chemical (G) Alkanoic acid, alkyl ester,
Intermediate. manuf. of, byproducts from, distn.
residues.
P-20-0058A.......................... 8 08/04/2021 CBI.................... (G) Additive for (G) Polysaccharide, polymer with
automatic unsaturated carboxylic acid and
dishwashing; Additive methacryloxyethyltrimethyl ammonium
for hard surface chloride, sodium salt, acid salt
cleaner. initiated.
P-21-0003A.......................... 4 08/30/2021 CBI.................... (G) Polymeric film (G) 4, 4 methylenebis (2, 6 dimethyl
former for coatings. phenol) polymer with 2-
(chloromethyl) oxirane, 1,4-benzene
diol, 2-methyl-2-propenoic acid,
mixed alkyl substituted 2-methyl 2-
propenoate, and ethyl 2-propenoate,
reaction products with 2-
(dimthylamino) ethanol.
P-21-0049A.......................... 3 08/06/2021 CBI.................... (G) Monomer........... (G) Alkanoic acid, polyhalo-(halo-oxo-
alkenyl)oxyalkyl ester.
P-21-0049A.......................... 4 08/13/2021 CBI.................... (G) Monomer........... (G) Alkanoic acid, polyhalo-(halo-oxo-
alkenyl)oxyalkyl ester.
P-21-0050A.......................... 3 08/06/2021 CBI.................... (G) Monomer........... (G) Alkenoic acid, halo-
polylhaloalkyl ester.
P-21-0050A.......................... 4 08/13/2021 CBI.................... (G) Monomer........... (G) Alkenoic acid, halo-
polylhaloalkyl ester.
P-21-0056A.......................... 3 08/19/2021 CBI.................... (G) Component of (G) Isocyanic acid,
coatings. polyalkylenepolyarylene ester,
polymer with alkyl-hydroxyalkyl-
alkanediol, alkoxyalcohol and
alkoxylalkoxyalcohol-blocked.
P-21-0057A.......................... 3 08/19/2021 CBI.................... (G) Component in (G) Sulfur based acid, compound with
coatings. aminoalkylalkyl-aminoalkylalkoxy-
polyoxyalkylalkanediyl, polymer with
haloalkyl-epoxide and
alkylalkylidene-cycloarylalcohol.
P-21-0058A.......................... 3 08/19/2021 CBI.................... (G) Component in (G) Substituted alkanoic acid,
coatings. compound with aminoalkylalkyl-
aminoalkylalkoxy-
polyoxyalkylalkanediyl, polymer with
haloalkyl-epoxide and
alkylalkylidene-cycloarylalcohol.
P-21-0060A.......................... 4 08/19/2021 CBI.................... (G) Isolated (G) Bisphenol A epichlorohydrin
intermediate. polymer with alkylpolyalkene-
polyarylene-hydroxypolyoxyalkyldiyl
reaction products with
alkylalkylidene-alkylalkylidene-
aminoalkyl-alkanepolyamine and
alkylaminoalkanol.
P-21-0061A.......................... 4 08/19/2021 CBI.................... (G) Component in (G) Sulfur based acid, compds. with
coatings. modified bisphenol A-epichlorohydrin-
polyalkylene polyol ether with
bisphenol A polymer-N-
dialkylalkylidene-N-
(dialkylalklyidene)aminoalkyl-
alkanepolyamine-alkylaminoalkanol
reaction products.
P-21-0062A.......................... 4 08/19/2021 CBI.................... (G) Component in (G) Substituted-alkanoic acid,
coatings. compds. with modified bisphenol A-
epichlorohydrin-polyalkylene polyol
ether with bisphenol A polymer-N-
dialkylalkylidene-N-
dialkylalkylideneaminoalkyl-
alkanepolyamine-alkylaminoalkanol
reaction products.
P-21-0078A.......................... 3 08/25/2021 Pinova, Inc............ (S) Tackifying (G) Phenol, polymer with alkyl-
additive used in tire (alkylalkylenyl)cyclohexene, mixed
manufacture; dialkylcyclohexadienes, mixed alkyl-
Tackifying additive (alkylalkylidene)cyclohexenes and
used in hot melt 3,7,7-trimethylbicyclo[4.1.0]hept-3-
adhesive applications ene.
(e.g., pressure
sensitive adhesives,
and graphic art
applications such as
bookbinding, magazine
manufacture, and
label making).
P-21-0098A.......................... 4 08/26/2021 Hubergroup............. (S) Co-initiator for (G) Poly(oxy-1,2-ethanediyl), alpha-
the curing of UV hydro-omega-[2(or 3)-[[substituted
printing inks. benzoyl]oxy]hydroxypropoxyl]-,
alpha, alpha', alpha'' -ether with 2-
ethyl-2-(hydroxymethyl)-1,3-
propanediol (3:1).
P-21-0100A.......................... 2 08/17/2021 ENI Trading & Shipping (G) Used as a (G) Raffinates (petroleum), vacuum
Inc. lubricant and distillate solvent, solvent-dewaxed,
lubricant additive hydrotreated.
(used in closed
systems; non-
dispersive use);
Lubricant and
lubricant additive
(used in closed
systems; non-
dispersive use).
P-21-0168A.......................... 2 08/10/2021 CBI.................... (G) Colorant.......... (G) Metal, [heteropolycyclic]-,
[[[(hydroxyalkyl)
amino]sulfonyl]alkyl]sulfonyl(sulfoal
kyl)sulfonyl derivs., ammonium
sodium salts.
P-21-0178........................... 2 08/19/2021 CBI.................... (G) Coating additive.. (G) Bisphenol A, polymer with
aminoalkylalkyl-aminoalkylalkyl-
poly[(oxy-alkyl-alkanepolyol)],
haloalkyl-epoxide, epoxy-epoxyalkoxy-
poly[(oxy-alkyl-alkanepolyol)],
sulfur-based salt.
P-21-0179........................... 2 08/19/2021 CBI.................... (G) Coating additive.. (G) Substituted-alkanoic acid, compd.
with aminoalkylalkyl-aminoalkylalkyl-
poly[(oxy-alkyl-alkanepolyol)]
polymer with haloalkyl-epoxide,
bisphenol A,epoxy-epoxyalkoxy-
poly[(oxy-alkyl-alkanepolyol)].
P-21-0199........................... 2 08/12/2021 Avery Dennison Mill (G) Processing aid.... (G) 1,6-Disubstituted hexane.
Hall.
P-21-0199A.......................... 3 08/18/2021 CBI.................... (G) Processing aid.... (G) 1,6-Disubstituted hexane.
[[Page 52902]]
P-21-0200........................... 1 08/02/2021 CBI.................... (G) Printing additive. (G) Saturated and unsaturated
hydrocarbon waxes, oxidized,
polymers with alkenoic acid, alkyl
alkanoate, alkenedioic acid,
polyalkylene glycol ether with
substituted carbomonocycle
(alkylidene)bis-, polyalkylene
glycol ether with substituted
carbomonocycle (alkylidene)bis-,
substituted carbomonocycle,
disubstituted carbomonocycle and
substituted heteropolycycle, alkyl
peroxide-initiated.
P-21-0202........................... 1 08/04/2021 CBI.................... (G) An ingredient used (G) Sulfonium, carbomonocycle
in the manufacture of bis[(trihaloalkyl)carbomonocycle],
photoresist. substituted carbomonocyclic ester.
P-21-0203........................... 3 08/10/2021 CBI.................... (G) Surfactant will be (G) Glycolipids, sophorose-contg.,
used in various Starmerella bomicola-fermented, from
applications in oil sugar and vegetable oils.
and gas industry.
P-21-0204........................... 1 08/12/2021 CBI.................... (G) Photolithography.. (G) Sulfonium, bis(3,4-
polyhalocarbocyclic)aryl-, alpha,
alpha, beta, beta-polyhalopolyhydro-
2,2-diaryl-4,7-methano-1,3-
heteropolycyclic-5-alkanesulfonate
(1:1).
P-21-0205........................... 1 08/13/2021 CBI.................... (G) Additive in (S) Benzene, [2-[(2-methyl-1-undecen-
household consumer 1-yl{time} oxy]ethyl]-.
products.
P-21-0206........................... 1 08/13/2021 HollyFrontier (G) Component of (G) Alkanes, branched and linear.
Corporation. gasoline.
P-21-0207........................... 2 08/18/2021 CBI.................... (G) Emulsifier........ (G) Fatty alcohol ethoxylate,
ethercarboxylate Branched and
Linear, Fatty alcohol ethoxylate,
ethercarboxylate.
P-21-0208........................... 1 08/17/2021 CBI.................... (G) Adhesive for (G) Aromatic diacids, polymer with
profile wrapping. alkyldiacids, alkyldiols,
benzofurandione, caprolactone and
1,1'-methylenebis[4-
isocyanatobenzene].
P-21-0209........................... 1 08/17/2021 CBI.................... (G) Adhesive for (G) Aromatic diacid, polymer with
profile wrapping. alkyldiacid, alkyldiols,
polypropylene glycol,
benzofurandione, caprolactone and
1,1'-methylenebis[4-
isocyanatobenzene].
P-21-0210........................... 1 08/17/2021 CBI.................... (G) Adhesive for (G) Aromatic diacids, polymer with
profile wrapping. alkyldiacids, alkyldiols,
benzofurandione, polypropylene,
alkylhydroxyacid glycolester,
caprolactone and 1,1'-methylenebis[4-
isocyanatobenzene].
SN-21-0006.......................... 2 08/27/2021 Carbice................ (S) For heat transfer, (S) Multiwalled carbon nanotubes
heat storage, thermal grown perpendicularly on an aluminum
emission, and general foil substrate using Fe catalyst.
temperature
management in heat-
generating systems
such as electronics;
Gap filling or
sealing of opposing
interfaces; For light
absorption
properties; To
improve mechanical
properties or
electrical
conductiveness of
other materials or
products.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 08/01/2021 to 08/31/2021
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type
Case No. Received date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-08-0246....................... 08/04/2021 06/13/2021 N.................. (S) Fatty acids, C8-10,
mixed tetraesters with
heptanoic acid,
pentaerythritol, 3,5,5-
trimethylhexanoic acid
and valeric acid.
P-10-0495....................... 08/20/2021 07/29/2021 N.................. (G) Poly(oxy-1,2-
ethanediyl),. alpha.,
monoalkyl ethers-
.omega.-mono (hydrogen
maleate)-.
P-11-0242....................... 08/03/2021 07/09/2021 N.................. (G) Hydroxy-olefin.
P-15-0607....................... 08/07/2021 07/26/2021 N.................. (G) 1,2,4,5,7,8-
hexoxonane,3,6,9-
trimethyl-,3,6,9-
tris(alkyl) derivs.
P-17-0343A...................... 08/19/2021 04/09/2018 Updated generic (G) Modified
name. benzimidazole salt.
P-18-0267....................... 08/24/2021 08/23/2021 N.................. (G) Branched alkanoic
acid, epoxy ester,
reaction products with
monocyclicdialkanamine
and polycyclic
dialkanol ether
polymer.
P-19-0028....................... 08/18/2021 08/05/2021 N.................. (G) Alkyl salicylate,
metal salts.
[[Page 52903]]
P-21-0051....................... 08/25/2021 08/24/2021 N.................. (S) Fatty acids, C18-
unsatd., dimers,
hydrogenated, polymers
with 2-hydroxyethyl-
terminated
hydrogenated
polybutadiene, bis(2,5-
dihydro-2,5-dioxo-1h-
pyrrole-1-hexanoate).
P-21-0065....................... 08/13/2021 08/12/2021 N.................. (G) Alkenoic acid,
reaction products with
alkylamine-alkanediyl
diacrylate polymer and
[oxybis(alkylene)]bis[
alkyl-alkanediol].
P-21-0103....................... 08/05/2021 08/02/2021 N.................. (S) Urea, N-[3-[[(4-
methylphenyl)sulfonyl]
oxy]phenyl]-N'-phenyl-
.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 08/01/2021 to 08/31/2021
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-14-0712........................... 08/03/2021 Quarterly PCDD/F Test of PMN (G) Plastics, wastes,
Substance using EPA Test pyrolyzed, bulk pyrolysate.
Method 8290A.
P-18-0293........................... 08/02/2021 Assessment of Acute (S) Propanedioic acid, 2-
Inhalation Toxicity with methylene-, 1,3-dihexyl
Dihexylmethylenemalonate in ester.
Wistar Han Rat (Nose Only)
Study.
P-21-0144........................... 08/16/2021 Composition Data............ (G) Naphtha, heavy catalytic
cracked.
P-21-0148........................... 08/16/2021 Composition Data............ (G) Naphtha, light catalytic
cracked.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 17, 2021.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2021-20606 Filed 9-22-21; 8:45 am]
BILLING CODE 6560-50-P
