Styrene- Maleic Anhydride Ethyl Amine Salt Copolymer; Exemption From the Requirement of a Tolerance, 52416-52418 [2021-20411]
Download as PDF
52416
Federal Register / Vol. 86, No. 180 / Tuesday, September 21, 2021 / Rules and Regulations
SUPPLEMENTARY INFORMATION).
[EPA–HQ–OAR–2018–0276; FRL–10018–45–
OAR]
RIN 2060–AT26
Control of Air Pollution From Airplanes
and Airplane Engines: GHG Emission
Standards and Test Procedures
Correction
In rule document 2020–28882,
appearing on pages 2136–2174 in the
issue of Monday, January 11, 2021,
make the following correction:
[Corrected]
On page 2172, in the second column,
on the seventeenth and eighteenth line
from the bottom, ‘‘(2) Low gross mass:
(0.45 * MTOM) + (0.63 *
(MTOM¥0.924)).’’ should read ‘‘(2)
Low gross mass: (0.45 * MTOM) + (0.63
* (MTOM∧0.924)).’’
■
[FR Doc. C1–2020–28882 Filed 9–20–21; 8:45 am]
BILLING CODE 0099–10–D
ENVIRONMENTAL PROTECTION
AGENCY
40 CFR Part 180
[EPA–HQ–OPP–2021–0160; FRL–8960–01–
OCSPP]
Styrene- Maleic Anhydride Ethyl Amine
Salt Copolymer; Exemption From the
Requirement of a Tolerance
Environmental Protection
Agency (EPA).
ACTION: Final rule.
AGENCY:
This regulation establishes an
exemption from the requirement of a
tolerance for residues of styrene- maleic
anhydride ethyl amine salt copolymer
when used as an inert ingredient in a
pesticide chemical formulation. S.A.
Ajinomoto Omnichem N.V., submitted a
petition to EPA under the Federal Food,
Drug, and Cosmetic Act (FFDCA),
requesting an exemption from the
requirement of a tolerance. This
regulation eliminates the need to
establish a maximum permissible level
for residues of styrene- maleic
anhydride ethyl amine salt copolymer
on food or feed commodities when used
in accordance with these exemptions.
DATES: This regulation is effective
September 21, 2021. Objections and
requests for hearings must be received
on or before November 22, 2021, and
must be filed in accordance with the
instructions provided in 40 CFR part
lotter on DSK11XQN23PROD with RULES1
SUMMARY:
VerDate Sep<11>2014
16:53 Sep 20, 2021
The docket for this action,
identified by docket identification (ID)
number EPA–HQ–OPP–2021–0160, is
available at https://www.regulations.gov
or at the Office of Pesticide Programs
Regulatory Public Docket (OPP Docket)
in the Environmental Protection Agency
Docket Center (EPA/DC), West William
Jefferson Clinton Bldg., Rm. 3334, 1301
Constitution Ave. NW, Washington, DC
20460–0001. The Public Reading Room
is open from 8:30 a.m. to 4:30 p.m.,
Monday through Friday, excluding legal
holidays. The telephone number for the
Public Reading Room is (202) 566–1744,
and the telephone number for the OPP
Docket is (703) 305–5805.
Due to the public health concerns
related to COVID–19, the EPA Docket
Center (EPA/DC) and Reading Room is
closed to visitors with limited
exceptions. The staff continues to
provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
Marietta Echeverria, Registration
Division (7505P), Office of Pesticide
Programs, Environmental Protection
Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460–0001; main
telephone number: (703) 305–7090;
email address: RDFRNotices@epa.gov.
SUPPLEMENTARY INFORMATION:
ADDRESSES:
40 CFR Parts 87 and 1030
§ 1030.20
C. Can I file an objection or hearing
request?
178 (see also Unit I.C. of the
ENVIRONMENTAL PROTECTION
AGENCY
Jkt 253001
I. General Information
A. Does this action apply to me?
You may be potentially affected by
this action if you are an agricultural
producer, food manufacturer, or
pesticide manufacturer. The following
list of North American Industrial
Classification System (NAICS) codes is
not intended to be exhaustive, but rather
provides a guide to help readers
determine whether this document
applies to them. Potentially affected
entities may include:
• Crop production (NAICS code 111).
• Animal production (NAICS code
112).
• Food manufacturing (NAICS code
311).
• Pesticide manufacturing (NAICS
code 32532).
B. How can I get electronic access to
other related information?
You may access a frequently updated
electronic version of 40 CFR part 180
through the Government Publishing
Office’s e-CFR site at https://
www.ecfr.gov/cgi-bin/text-idx?&c=ecfr&
tpl=/ecfrbrowse/Title40/40tab_02.tpl.
PO 00000
Frm 00022
Fmt 4700
Sfmt 4700
Under FFDCA section 408(g), 21
U.S.C. 346a(g), any person may file an
objection to any aspect of this regulation
and may also request a hearing on those
objections. You must file your objection
or request a hearing on this regulation
in accordance with the instructions
provided in 40 CFR part 178. To ensure
proper receipt by EPA, you must
identify docket ID number EPA–HQ–
OPP–2021–0160 in the subject line on
the first page of your submission. All
objections and requests for a hearing
must be in writing and must be received
by the Hearing Clerk on or before
November 22, 2021. Addresses for mail
and hand delivery of objections and
hearing requests are provided in 40 CFR
178.25(b). In addition to filing an
objection or hearing request with the
Hearing Clerk as described in 40 CFR
part 178, please submit a copy of the
filing (excluding any Confidential
Business Information (CBI)) for
inclusion in the public docket.
Information not marked confidential
pursuant to 40 CFR part 2 may be
disclosed publicly by EPA without prior
notice. Submit the non-CBI copy of your
objection or hearing request, identified
by docket ID number EPA–HQ–OPP–
2021–0160, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be CBI or
other information whose disclosure is
restricted by statute.
• Mail: OPP Docket, Environmental
Protection Agency Docket Center (EPA/
DC), (28221T), 1200 Pennsylvania Ave.
NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on commenting
or visiting the docket, along with more
information about dockets generally, is
available at https://www.epa.gov/
dockets.
II. Background and Statutory Findings
In the Federal Register of March 22,
2021 (86 FR 15162) (FRL–10021–44),
EPA issued a document pursuant to
FFDCA section 408, 21 U.S.C. 346a,
announcing the receipt of a pesticide
petition (PP IN–11408) by Wagner
Regulatory Associates, Inc., on behalf of,
S.A. Ajinomoto Omnichem N.V.,
Cooppallaan, 91 B–9230, Wetteren,
Belgium. The petition requested that 40
E:\FR\FM\21SER1.SGM
21SER1
Federal Register / Vol. 86, No. 180 / Tuesday, September 21, 2021 / Rules and Regulations
lotter on DSK11XQN23PROD with RULES1
CFR 180.960 be amended by
establishing an exemption from the
requirement of a tolerance for residues
of styrene- maleic anhydride ethyl
amine salt copolymer. That document
included a summary of the petition
prepared by the petitioner and solicited
comments on the petitioner’s request.
The Agency did not receive any
comments in response to the notice of
filing.
Section 408(c)(2)(A)(i) of FFDCA
allows EPA to establish an exemption
from the requirement for a tolerance (the
legal limit for a pesticide chemical
residue in or on a food) only if EPA
determines that the exemption is ‘‘safe.’’
Section 408(c)(2)(A)(ii) of FFDCA
defines ‘‘safe’’ to mean that ‘‘there is a
reasonable certainty that no harm will
result from aggregate exposure to the
pesticide chemical residue, including
all anticipated dietary exposures and all
other exposures for which there is
reliable information.’’ This includes
exposure through drinking water and
use in residential settings but does not
include occupational exposure. Section
408(b)(2)(C) of FFDCA requires EPA to
give special consideration to exposure
of infants and children to the pesticide
chemical residue in establishing an
exemption from the requirement of a
tolerance and to ‘‘ensure that there is a
reasonable certainty that no harm will
result to infants and children from
aggregate exposure to the pesticide
chemical residue...’’ and specifies
factors EPA is to consider in
establishing an exemption.
III. Risk Assessment and Statutory
Findings
EPA establishes exemptions from the
requirement of a tolerance only in those
cases where it can be shown that the
risks from aggregate exposure to
pesticide chemical residues under
reasonably foreseeable circumstances
will pose no appreciable risks to human
health. In order to determine the risks
from aggregate exposure to pesticide
inert ingredients, the Agency considers
the toxicity of the inert in conjunction
with possible exposure to residues of
the inert ingredient through food,
drinking water, and through other
exposures that occur as a result of
pesticide use in residential settings. If
EPA is able to determine that a finite
tolerance is not necessary to ensure that
there is a reasonable certainty that no
harm will result from aggregate
exposure to the inert ingredient, an
exemption from the requirement of a
tolerance may be established.
Consistent with FFDCA section
408(b)(2)(D), EPA has reviewed the
available scientific data and other
VerDate Sep<11>2014
16:53 Sep 20, 2021
Jkt 253001
relevant information in support of this
action and considered its validity,
completeness and reliability and the
relationship of this information to
human risk. EPA has also considered
available information concerning the
variability of the sensitivities of major
identifiable subgroups of consumers,
including infants and children. In the
case of certain chemical substances that
are defined as polymers, the Agency has
established a set of criteria to identify
categories of polymers expected to
present minimal or no risk.
The definition of a polymer is given
in 40 CFR 723.250(b) and the exclusion
criteria for identifying these low-risk
polymers are described in 40 CFR
723.250(d). Styrene- maleic anhydride
ethyl amine salt copolymer conforms to
the definition of a polymer given in 40
CFR 723.250(b) and meets the following
criteria that are used to identify low-risk
polymers.
1. The polymer is not a cationic
polymer nor is it reasonably anticipated
to become a cationic polymer in a
natural aquatic environment.
2. The polymer does contain as an
integral part of its composition at least
two of the atomic elements carbon,
hydrogen, nitrogen, oxygen, silicon, and
sulfur.
3. The polymer does not contain as an
integral part of its composition, except
as impurities, any element other than
those listed in 40 CFR 723.250(d)(2)(ii).
4. The polymer is neither designed
nor can it be reasonably anticipated to
substantially degrade, decompose, or
depolymerize.
5. The polymer is manufactured or
imported from monomers and/or
reactants that are already included on
the TSCA Chemical Substance
Inventory or manufactured under an
applicable TSCA section 5 exemption.
6. The polymer is not a water
absorbing polymer with a number
average molecular weight (MW) greater
than or equal to 10,000 daltons.
7. The polymer does not contain
certain perfluoroalkyl moieties
consisting of a CF3¥ or longer chain
length as listed in 40 CFR 723.250(d)(6).
Additionally, the polymer also meets
as required the following exemption
criteria specified in 40 CFR 723.250(e).
8. The polymer’s number average MW
of 1,700 is greater than 1,000 and less
than 10,000 daltons. The polymer
contains less than 10% oligomeric
material below MW 500 and less than
25% oligomeric material below MW
1,000, and the polymer does not contain
any reactive functional groups.
Thus, styrene- maleic anhydride ethyl
amine salt copolymer meets the criteria
for a polymer to be considered low risk
PO 00000
Frm 00023
Fmt 4700
Sfmt 4700
52417
under 40 CFR 723.250. Based on its
conformance to the criteria in this unit,
no mammalian toxicity is anticipated
from dietary, inhalation, or dermal
exposure to styrene- maleic anhydride
ethyl amine salt copolymer.
IV. Aggregate Exposures
For the purposes of assessing
potential exposure under this
exemption, EPA considered that
styrene- maleic anhydride ethyl amine
salt copolymer could be present in all
raw and processed agricultural
commodities and drinking water, and
that non-occupational non-dietary
exposure was possible. The number
average MW of styrene- maleic
anhydride ethyl amine salt copolymer is
1,700 daltons. Generally, a polymer of
this size would be poorly absorbed
through the intact gastrointestinal tract
or through intact human skin. Since
styrene- maleic anhydride ethyl amine
salt copolymer conforms to the criteria
that identify a low-risk polymer, there
are no concerns for risks associated with
any potential exposure scenarios that
are reasonably foreseeable. The Agency
has determined that a tolerance is not
necessary to protect the public health.
V. Cumulative Effects From Substances
With a Common Mechanism of Toxicity
Section 408(b)(2)(D)(v) of FFDCA
requires that, when considering whether
to establish, modify, or revoke a
tolerance, the Agency consider
‘‘available information’’ concerning the
cumulative effects of a particular
pesticide’s residues and ‘‘other
substances that have a common
mechanism of toxicity.’’
EPA has not found styrene- maleic
anhydride ethyl amine salt copolymer to
share a common mechanism of toxicity
with any other substances, and styrenemaleic anhydride ethyl amine salt
copolymer does not appear to produce
a toxic metabolite produced by other
substances. For the purposes of this
tolerance action, therefore, EPA has
assumed that styrene- maleic anhydride
ethyl amine salt copolymer does not
have a common mechanism of toxicity
with other substances. For information
regarding EPA’s efforts to determine
which chemicals have a common
mechanism of toxicity and to evaluate
the cumulative effects of such
chemicals, see EPA’s website at https://
www.epa.gov/pesticides/cumulative.
VI. Additional Safety Factor for the
Protection of Infants and Children
Section 408(b)(2)(C) of FFDCA
provides that EPA shall apply an
additional tenfold margin of safety for
infants and children in the case of
E:\FR\FM\21SER1.SGM
21SER1
52418
Federal Register / Vol. 86, No. 180 / Tuesday, September 21, 2021 / Rules and Regulations
threshold effects to account for prenatal
and postnatal toxicity and the
completeness of the data base unless
EPA concludes that a different margin of
safety will be safe for infants and
children. Due to the expected low
toxicity of styrene- maleic anhydride
ethyl amine salt copolymer, EPA has not
used a safety factor analysis to assess
the risk. For the same reasons the
additional tenfold safety factor is
unnecessary.
VII. Determination of Safety
Based on the conformance to the
criteria used to identify a low-risk
polymer, EPA concludes that there is a
reasonable certainty of no harm to the
U.S. population, including infants and
children, from aggregate exposure to
residues of styrene- maleic anhydride
ethyl amine salt copolymer.
VIII. Analytical Enforcement
Methodology
An analytical method is not required
for enforcement purposes since the
Agency is establishing an exemption
from the requirement of a tolerance
without any numerical limitation.
IX. Conclusion
Accordingly, EPA finds that
exempting residues of styrene- maleic
anhydride ethyl amine salt copolymer
from the requirement of a tolerance will
be safe.
X. Statutory and Executive Order
Reviews
This action establishes a tolerance
under FFDCA section 408(d) in
response to a petition submitted to the
Agency. The Office of Management and
Budget (OMB) has exempted these types
of actions from review under Executive
Order 12866, entitled ‘‘Regulatory
Planning and Review’’ (58 FR 51735,
October 4, 1993). Because this action
has been exempted from review under
Executive Order 12866, this action is
not subject to Executive Order 13211,
entitled ‘‘Actions Concerning
Regulations That Significantly Affect
Energy Supply, Distribution, or Use’’ (66
FR 28355, May 22, 2001) or Executive
Order 13045, entitled ‘‘Protection of
Children from Environmental Health
Risks and Safety Risks’’ (62 FR 19885,
April 23, 1997). This action does not
contain any information collections
subject to OMB approval under the
Paperwork Reduction Act (PRA) (44
U.S.C. 3501 et seq.), nor does it require
any special considerations under
Executive Order 12898, entitled
‘‘Federal Actions to Address
Environmental Justice in Minority
Populations and Low-Income
Populations’’ (59 FR 7629, February 16,
1994).
Since tolerances and exemptions that
are established on the basis of a petition
under FFDCA section 408(d), such as
the tolerance in this final rule, do not
require the issuance of a proposed rule,
the requirements of the Regulatory
Flexibility Act (RFA) (5 U.S.C. 601 et
seq.), do not apply.
This action directly regulates growers,
food processors, food handlers, and food
retailers, not States or Tribes, nor does
this action alter the relationships or
distribution of power and
responsibilities established by Congress
in the preemption provisions of FFDCA
section 408(n)(4). As such, the Agency
has determined that this action will not
have a substantial direct effect on States
or Tribal Governments, on the
relationship between the National
Government and the States or Tribal
Governments, or on the distribution of
power and responsibilities among the
various levels of government or between
the Federal Government and Indian
Tribes. Thus, the Agency has
determined that Executive Order 13132,
entitled ‘‘Federalism’’ (64 FR 43255,
August 10, 1999) and Executive Order
13175, entitled ‘‘Consultation and
Coordination with Indian Tribal
Governments’’ (65 FR 67249, November
9, 2000) do not apply to this action. In
addition, this action does not impose
any enforceable duty or contain any
unfunded mandate as described under
Title II of the Unfunded Mandates
Reform Act (UMRA) (2 U.S.C. 1501 et
seq.).
This action does not involve any
technical standards that would require
Agency consideration of voluntary
consensus standards pursuant to section
12(d) of the National Technology
Transfer and Advancement Act
(NTTAA) (15 U.S.C. 272 note).
XI. Congressional Review Act
Pursuant to the Congressional Review
Act (5 U.S.C. 801 et seq.), EPA will
submit a report containing this rule and
other required information to the U.S.
Senate, the U.S. House of
Representatives, and the Comptroller
General of the United States prior to
publication of the rule in the Federal
Register. This action is not a ‘‘major
rule’’ as defined by 5 U.S.C. 804(2).
List of Subjects in 40 CFR Part 180
Environmental protection,
Administrative practice and procedure,
Agricultural commodities, Pesticides
and pests, Reporting and recordkeeping
requirements.
Dated: September 13, 2021.
Marietta Echeverria,
Acting Director, Registration Division, Office
of Pesticide Programs.
Therefore, for the reasons stated in the
preamble, EPA is amending 40 CFR
chapter I as follows:
PART 180—TOLERANCES AND
EXEMPTIONS FOR PESTICIDE
CHEMICAL RESIDUES IN FOOD
1. The authority citation for part 180
continues to read as follows:
■
Authority: 21 U.S.C. 321(q), 346a and 371.
2. In § 180.960, add in alphabetical
order the polymer ‘‘Styrene- maleic
anhydride ethyl amine salt copolymer,
minimum number average molecular
weight (in amu), 1,700’’ to the table to
read as follows:
■
§ 180.960 Polymers; exemptions from the
requirement of a tolerance.
*
*
*
Polymer
lotter on DSK11XQN23PROD with RULES1
*
*
*
*
*
[FR Doc. 2021–20411 Filed 9–20–21; 8:45 am]
BILLING CODE 6560–50–P
VerDate Sep<11>2014
16:53 Sep 20, 2021
Jkt 253001
PO 00000
Frm 00024
*
CAS No.
*
*
*
*
*
*
Styrene- maleic anhydride ethyl amine salt copolymer, minimum number average molecular weight (in amu), 1,700 ............ None.
*
*
Fmt 4700
Sfmt 9990
E:\FR\FM\21SER1.SGM
21SER1
*
*
Agencies
[Federal Register Volume 86, Number 180 (Tuesday, September 21, 2021)]
[Rules and Regulations]
[Pages 52416-52418]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-20411]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 180
[EPA-HQ-OPP-2021-0160; FRL-8960-01-OCSPP]
Styrene- Maleic Anhydride Ethyl Amine Salt Copolymer; Exemption
From the Requirement of a Tolerance
AGENCY: Environmental Protection Agency (EPA).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This regulation establishes an exemption from the requirement
of a tolerance for residues of styrene- maleic anhydride ethyl amine
salt copolymer when used as an inert ingredient in a pesticide chemical
formulation. S.A. Ajinomoto Omnichem N.V., submitted a petition to EPA
under the Federal Food, Drug, and Cosmetic Act (FFDCA), requesting an
exemption from the requirement of a tolerance. This regulation
eliminates the need to establish a maximum permissible level for
residues of styrene- maleic anhydride ethyl amine salt copolymer on
food or feed commodities when used in accordance with these exemptions.
DATES: This regulation is effective September 21, 2021. Objections and
requests for hearings must be received on or before November 22, 2021,
and must be filed in accordance with the instructions provided in 40
CFR part 178 (see also Unit I.C. of the SUPPLEMENTARY INFORMATION).
ADDRESSES: The docket for this action, identified by docket
identification (ID) number EPA-HQ-OPP-2021-0160, is available at https://www.regulations.gov or at the Office of Pesticide Programs Regulatory
Public Docket (OPP Docket) in the Environmental Protection Agency
Docket Center (EPA/DC), West William Jefferson Clinton Bldg., Rm. 3334,
1301 Constitution Ave. NW, Washington, DC 20460-0001. The Public
Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through
Friday, excluding legal holidays. The telephone number for the Public
Reading Room is (202) 566-1744, and the telephone number for the OPP
Docket is (703) 305-5805.
Due to the public health concerns related to COVID-19, the EPA
Docket Center (EPA/DC) and Reading Room is closed to visitors with
limited exceptions. The staff continues to provide remote customer
service via email, phone, and webform. For the latest status
information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: Marietta Echeverria, Registration
Division (7505P), Office of Pesticide Programs, Environmental
Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-
0001; main telephone number: (703) 305-7090; email address:
[email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
You may be potentially affected by this action if you are an
agricultural producer, food manufacturer, or pesticide manufacturer.
The following list of North American Industrial Classification System
(NAICS) codes is not intended to be exhaustive, but rather provides a
guide to help readers determine whether this document applies to them.
Potentially affected entities may include:
Crop production (NAICS code 111).
Animal production (NAICS code 112).
Food manufacturing (NAICS code 311).
Pesticide manufacturing (NAICS code 32532).
B. How can I get electronic access to other related information?
You may access a frequently updated electronic version of 40 CFR
part 180 through the Government Publishing Office's e-CFR site at
https://www.ecfr.gov/cgi-bin/text-idx?&c=ecfr&tpl=/ecfrbrowse/Title40/40tab_02.tpl.
C. Can I file an objection or hearing request?
Under FFDCA section 408(g), 21 U.S.C. 346a(g), any person may file
an objection to any aspect of this regulation and may also request a
hearing on those objections. You must file your objection or request a
hearing on this regulation in accordance with the instructions provided
in 40 CFR part 178. To ensure proper receipt by EPA, you must identify
docket ID number EPA-HQ-OPP-2021-0160 in the subject line on the first
page of your submission. All objections and requests for a hearing must
be in writing and must be received by the Hearing Clerk on or before
November 22, 2021. Addresses for mail and hand delivery of objections
and hearing requests are provided in 40 CFR 178.25(b). In addition to
filing an objection or hearing request with the Hearing Clerk as
described in 40 CFR part 178, please submit a copy of the filing
(excluding any Confidential Business Information (CBI)) for inclusion
in the public docket. Information not marked confidential pursuant to
40 CFR part 2 may be disclosed publicly by EPA without prior notice.
Submit the non-CBI copy of your objection or hearing request,
identified by docket ID number EPA-HQ-OPP-2021-0160, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be CBI or other
information whose disclosure is restricted by statute.
Mail: OPP Docket, Environmental Protection Agency Docket
Center (EPA/DC), (28221T), 1200 Pennsylvania Ave. NW, Washington, DC
20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html. Additional
instructions on commenting or visiting the docket, along with more
information about dockets generally, is available at https://www.epa.gov/dockets.
II. Background and Statutory Findings
In the Federal Register of March 22, 2021 (86 FR 15162) (FRL-10021-
44), EPA issued a document pursuant to FFDCA section 408, 21 U.S.C.
346a, announcing the receipt of a pesticide petition (PP IN-11408) by
Wagner Regulatory Associates, Inc., on behalf of, S.A. Ajinomoto
Omnichem N.V., Cooppallaan, 91 B-9230, Wetteren, Belgium. The petition
requested that 40
[[Page 52417]]
CFR 180.960 be amended by establishing an exemption from the
requirement of a tolerance for residues of styrene- maleic anhydride
ethyl amine salt copolymer. That document included a summary of the
petition prepared by the petitioner and solicited comments on the
petitioner's request. The Agency did not receive any comments in
response to the notice of filing.
Section 408(c)(2)(A)(i) of FFDCA allows EPA to establish an
exemption from the requirement for a tolerance (the legal limit for a
pesticide chemical residue in or on a food) only if EPA determines that
the exemption is ``safe.'' Section 408(c)(2)(A)(ii) of FFDCA defines
``safe'' to mean that ``there is a reasonable certainty that no harm
will result from aggregate exposure to the pesticide chemical residue,
including all anticipated dietary exposures and all other exposures for
which there is reliable information.'' This includes exposure through
drinking water and use in residential settings but does not include
occupational exposure. Section 408(b)(2)(C) of FFDCA requires EPA to
give special consideration to exposure of infants and children to the
pesticide chemical residue in establishing an exemption from the
requirement of a tolerance and to ``ensure that there is a reasonable
certainty that no harm will result to infants and children from
aggregate exposure to the pesticide chemical residue...'' and specifies
factors EPA is to consider in establishing an exemption.
III. Risk Assessment and Statutory Findings
EPA establishes exemptions from the requirement of a tolerance only
in those cases where it can be shown that the risks from aggregate
exposure to pesticide chemical residues under reasonably foreseeable
circumstances will pose no appreciable risks to human health. In order
to determine the risks from aggregate exposure to pesticide inert
ingredients, the Agency considers the toxicity of the inert in
conjunction with possible exposure to residues of the inert ingredient
through food, drinking water, and through other exposures that occur as
a result of pesticide use in residential settings. If EPA is able to
determine that a finite tolerance is not necessary to ensure that there
is a reasonable certainty that no harm will result from aggregate
exposure to the inert ingredient, an exemption from the requirement of
a tolerance may be established.
Consistent with FFDCA section 408(b)(2)(D), EPA has reviewed the
available scientific data and other relevant information in support of
this action and considered its validity, completeness and reliability
and the relationship of this information to human risk. EPA has also
considered available information concerning the variability of the
sensitivities of major identifiable subgroups of consumers, including
infants and children. In the case of certain chemical substances that
are defined as polymers, the Agency has established a set of criteria
to identify categories of polymers expected to present minimal or no
risk.
The definition of a polymer is given in 40 CFR 723.250(b) and the
exclusion criteria for identifying these low-risk polymers are
described in 40 CFR 723.250(d). Styrene- maleic anhydride ethyl amine
salt copolymer conforms to the definition of a polymer given in 40 CFR
723.250(b) and meets the following criteria that are used to identify
low-risk polymers.
1. The polymer is not a cationic polymer nor is it reasonably
anticipated to become a cationic polymer in a natural aquatic
environment.
2. The polymer does contain as an integral part of its composition
at least two of the atomic elements carbon, hydrogen, nitrogen, oxygen,
silicon, and sulfur.
3. The polymer does not contain as an integral part of its
composition, except as impurities, any element other than those listed
in 40 CFR 723.250(d)(2)(ii).
4. The polymer is neither designed nor can it be reasonably
anticipated to substantially degrade, decompose, or depolymerize.
5. The polymer is manufactured or imported from monomers and/or
reactants that are already included on the TSCA Chemical Substance
Inventory or manufactured under an applicable TSCA section 5 exemption.
6. The polymer is not a water absorbing polymer with a number
average molecular weight (MW) greater than or equal to 10,000 daltons.
7. The polymer does not contain certain perfluoroalkyl moieties
consisting of a CF3- or longer chain length as listed in 40
CFR 723.250(d)(6).
Additionally, the polymer also meets as required the following
exemption criteria specified in 40 CFR 723.250(e).
8. The polymer's number average MW of 1,700 is greater than 1,000
and less than 10,000 daltons. The polymer contains less than 10%
oligomeric material below MW 500 and less than 25% oligomeric material
below MW 1,000, and the polymer does not contain any reactive
functional groups.
Thus, styrene- maleic anhydride ethyl amine salt copolymer meets
the criteria for a polymer to be considered low risk under 40 CFR
723.250. Based on its conformance to the criteria in this unit, no
mammalian toxicity is anticipated from dietary, inhalation, or dermal
exposure to styrene- maleic anhydride ethyl amine salt copolymer.
IV. Aggregate Exposures
For the purposes of assessing potential exposure under this
exemption, EPA considered that styrene- maleic anhydride ethyl amine
salt copolymer could be present in all raw and processed agricultural
commodities and drinking water, and that non-occupational non-dietary
exposure was possible. The number average MW of styrene- maleic
anhydride ethyl amine salt copolymer is 1,700 daltons. Generally, a
polymer of this size would be poorly absorbed through the intact
gastrointestinal tract or through intact human skin. Since styrene-
maleic anhydride ethyl amine salt copolymer conforms to the criteria
that identify a low-risk polymer, there are no concerns for risks
associated with any potential exposure scenarios that are reasonably
foreseeable. The Agency has determined that a tolerance is not
necessary to protect the public health.
V. Cumulative Effects From Substances With a Common Mechanism of
Toxicity
Section 408(b)(2)(D)(v) of FFDCA requires that, when considering
whether to establish, modify, or revoke a tolerance, the Agency
consider ``available information'' concerning the cumulative effects of
a particular pesticide's residues and ``other substances that have a
common mechanism of toxicity.''
EPA has not found styrene- maleic anhydride ethyl amine salt
copolymer to share a common mechanism of toxicity with any other
substances, and styrene- maleic anhydride ethyl amine salt copolymer
does not appear to produce a toxic metabolite produced by other
substances. For the purposes of this tolerance action, therefore, EPA
has assumed that styrene- maleic anhydride ethyl amine salt copolymer
does not have a common mechanism of toxicity with other substances. For
information regarding EPA's efforts to determine which chemicals have a
common mechanism of toxicity and to evaluate the cumulative effects of
such chemicals, see EPA's website at https://www.epa.gov/pesticides/cumulative.
VI. Additional Safety Factor for the Protection of Infants and Children
Section 408(b)(2)(C) of FFDCA provides that EPA shall apply an
additional tenfold margin of safety for infants and children in the
case of
[[Page 52418]]
threshold effects to account for prenatal and postnatal toxicity and
the completeness of the data base unless EPA concludes that a different
margin of safety will be safe for infants and children. Due to the
expected low toxicity of styrene- maleic anhydride ethyl amine salt
copolymer, EPA has not used a safety factor analysis to assess the
risk. For the same reasons the additional tenfold safety factor is
unnecessary.
VII. Determination of Safety
Based on the conformance to the criteria used to identify a low-
risk polymer, EPA concludes that there is a reasonable certainty of no
harm to the U.S. population, including infants and children, from
aggregate exposure to residues of styrene- maleic anhydride ethyl amine
salt copolymer.
VIII. Analytical Enforcement Methodology
An analytical method is not required for enforcement purposes since
the Agency is establishing an exemption from the requirement of a
tolerance without any numerical limitation.
IX. Conclusion
Accordingly, EPA finds that exempting residues of styrene- maleic
anhydride ethyl amine salt copolymer from the requirement of a
tolerance will be safe.
X. Statutory and Executive Order Reviews
This action establishes a tolerance under FFDCA section 408(d) in
response to a petition submitted to the Agency. The Office of
Management and Budget (OMB) has exempted these types of actions from
review under Executive Order 12866, entitled ``Regulatory Planning and
Review'' (58 FR 51735, October 4, 1993). Because this action has been
exempted from review under Executive Order 12866, this action is not
subject to Executive Order 13211, entitled ``Actions Concerning
Regulations That Significantly Affect Energy Supply, Distribution, or
Use'' (66 FR 28355, May 22, 2001) or Executive Order 13045, entitled
``Protection of Children from Environmental Health Risks and Safety
Risks'' (62 FR 19885, April 23, 1997). This action does not contain any
information collections subject to OMB approval under the Paperwork
Reduction Act (PRA) (44 U.S.C. 3501 et seq.), nor does it require any
special considerations under Executive Order 12898, entitled ``Federal
Actions to Address Environmental Justice in Minority Populations and
Low-Income Populations'' (59 FR 7629, February 16, 1994).
Since tolerances and exemptions that are established on the basis
of a petition under FFDCA section 408(d), such as the tolerance in this
final rule, do not require the issuance of a proposed rule, the
requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et
seq.), do not apply.
This action directly regulates growers, food processors, food
handlers, and food retailers, not States or Tribes, nor does this
action alter the relationships or distribution of power and
responsibilities established by Congress in the preemption provisions
of FFDCA section 408(n)(4). As such, the Agency has determined that
this action will not have a substantial direct effect on States or
Tribal Governments, on the relationship between the National Government
and the States or Tribal Governments, or on the distribution of power
and responsibilities among the various levels of government or between
the Federal Government and Indian Tribes. Thus, the Agency has
determined that Executive Order 13132, entitled ``Federalism'' (64 FR
43255, August 10, 1999) and Executive Order 13175, entitled
``Consultation and Coordination with Indian Tribal Governments'' (65 FR
67249, November 9, 2000) do not apply to this action. In addition, this
action does not impose any enforceable duty or contain any unfunded
mandate as described under Title II of the Unfunded Mandates Reform Act
(UMRA) (2 U.S.C. 1501 et seq.).
This action does not involve any technical standards that would
require Agency consideration of voluntary consensus standards pursuant
to section 12(d) of the National Technology Transfer and Advancement
Act (NTTAA) (15 U.S.C. 272 note).
XI. Congressional Review Act
Pursuant to the Congressional Review Act (5 U.S.C. 801 et seq.),
EPA will submit a report containing this rule and other required
information to the U.S. Senate, the U.S. House of Representatives, and
the Comptroller General of the United States prior to publication of
the rule in the Federal Register. This action is not a ``major rule''
as defined by 5 U.S.C. 804(2).
List of Subjects in 40 CFR Part 180
Environmental protection, Administrative practice and procedure,
Agricultural commodities, Pesticides and pests, Reporting and
recordkeeping requirements.
Dated: September 13, 2021.
Marietta Echeverria,
Acting Director, Registration Division, Office of Pesticide Programs.
Therefore, for the reasons stated in the preamble, EPA is amending
40 CFR chapter I as follows:
PART 180--TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES
IN FOOD
0
1. The authority citation for part 180 continues to read as follows:
Authority: 21 U.S.C. 321(q), 346a and 371.
0
2. In Sec. 180.960, add in alphabetical order the polymer ``Styrene-
maleic anhydride ethyl amine salt copolymer, minimum number average
molecular weight (in amu), 1,700'' to the table to read as follows:
Sec. 180.960 Polymers; exemptions from the requirement of a
tolerance.
* * * * *
------------------------------------------------------------------------
Polymer CAS No.
------------------------------------------------------------------------
* * * * * * *
Styrene- maleic anhydride ethyl amine salt None.
copolymer, minimum number average
molecular weight (in amu), 1,700.
* * * * * * *
------------------------------------------------------------------------
[FR Doc. 2021-20411 Filed 9-20-21; 8:45 am]
BILLING CODE 6560-50-P