Certain New Chemicals; Receipt and Status Information for March 2021, 22198-22202 [2021-08756]
Download as PDF
<![CDATA[
22198
Federal Register / Vol. 86, No. 79 / Tuesday, April 27, 2021 / Notices
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Project No. 4451–024]
Green Mountain Power Corporation;
City of Somersworth, New Hampshire;
Notice of Waiver Period for Water
Quality Certification Application
On April 6, 2021, Green Mountain
Power Corporation and the City of
Somersworth, New Hampshire
submitted to the Federal Energy
Regulatory Commission a copy of its
application for a Clean Water Act
section 401(a)(1) water quality
certification filed with the New
Hampshire Department of
Environmental Services (New
Hampshire DES), in conjunction with
the above captioned project. Pursuant to
40 CFR 121.6, we hereby notify the New
Hampshire DES of the following:
[FR Doc. 2021–08743 Filed 4–26–21; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Project No. 4451–024]
Green Mountain Power Corporation;
City of Somersworth, New Hampshire;
Notice of Waiver Period for Water
Quality Certification Application
jbell on DSKJLSW7X2PROD with NOTICES
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2021–0068; FRL–10022–
83]
Environmental Protection
Agency (EPA).
ACTION: Notice.
Dated: April 21, 2021.
Kimberly D. Bose,
Secretary.
On April 6, 2021, Green Mountain
Power Corporation and the City of
Somersworth, New Hampshire
submitted to the Federal Energy
Regulatory Commission a copy of its
application for a Clean Water Act
section 401(a)(1) water quality
certification filed with the Maine
Department of Environmental Protection
(Maine DEP), in conjunction with the
above captioned project. Pursuant to 40
CFR 121.6, we hereby notify the Maine
DEP of the following:
Jkt 253001
[FR Doc. 2021–08745 Filed 4–26–21; 8:45 am]
AGENCY:
If New Hampshire DES fails or refuses
to act on the water quality certification
request by the above waiver date, then
the agency’s certifying authority is
deemed waived pursuant to section
401(a)(1) of the Clean Water Act, 33
U.S.C. 1341(a)(1).
18:52 Apr 26, 2021
Dated: April 21, 2021.
Kimberly D. Bose,
Secretary.
Certain New Chemicals; Receipt and
Status Information for March 2021
Date of Receipt of the Certification
Request: April 6, 2021.
Reasonable Period of Time to Act on the
Certification Request: One year.
Date Waiver Occurs for Failure to Act:
April 7, 2022.
VerDate Sep<11>2014
Date of Receipt of the Certification
Request: April 6, 2021.
Reasonable Period of Time to Act on
the Certification Request: One year.
Date Waiver Occurs for Failure to Act:
April 7, 2022.
If Maine DEP fails or refuses to act on
the water quality certification request by
the above waiver date, then the agency’s
certifying authority is deemed waived
pursuant to section 401(a)(1) of the
Clean Water Act, 33 U.S.C. 1341(a)(1).
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA, including
notice of receipt of a Premanufacture
notice (PMN), Significant New Use
Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an
amended notice or test information; an
exemption application (Biotech
exemption); an application for a test
marketing exemption (TME), both
pending and/or concluded; a notice of
commencement (NOC) of manufacture
(including import) for new chemical
substances; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review. This
document covers the period from 03/01/
2021 to 03/31/2021.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
May 27, 2021.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2021–0068,
and the specific case number for the
chemical substance related to your
comment, through the Federal
eRulemaking Portal at https://
www.regulations.gov. Follow the online
SUMMARY:
PO 00000
Frm 00069
Fmt 4703
Sfmt 4703
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Additional
instructions on commenting or visiting
the docket, along with more information
about dockets generally, is available at
https://www.epa.gov/dockets.
Due to the public health emergency,
the EPA Docket Center (EPA/DC) and
Reading Room is closed to visitors with
limited exceptions. The staff continues
to provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Project Management and
Operations Division (MC 7407M), Office
of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
03/01/2021 to 03/31/2021. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended Toxic Substances Control
Act (TSCA), including the TSCA section
5 PMN/SNUN/MCAN and exemption
notices received, the date of receipt, the
final EPA determination on the notice,
and the effective date of EPA’s
determination for PMN/SNUN/MCAN
notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
E:\FR\FM\27APN1.SGM
27APN1
Federal Register / Vol. 86, No. 79 / Tuesday, April 27, 2021 / Notices
jbell on DSKJLSW7X2PROD with NOTICES
B. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
a chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA published individual
notices reflecting the status of TSCA
section 5 filings received, pending or
concluded. In 1995, the Agency
modified its approach and streamlined
the information published in the
Federal Register after providing notice
of such changes to the public and an
opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
22199
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2021 TO 03/31/2021
Case No.
J–21–0004 .........
VerDate Sep<11>2014
Received
date
Version
3
01/25/2021
18:52 Apr 26, 2021
Jkt 253001
Manufacturer
Danisco US, Inc ......
PO 00000
Use
Chemical substance
(G) Production of a chemical substance
Frm 00070
Fmt 4703
Sfmt 4703
(G) Genetically modified microorganism for the production of a chemical substance.
E:\FR\FM\27APN1.SGM
27APN1
22200
Federal Register / Vol. 86, No. 79 / Tuesday, April 27, 2021 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2021 TO 03/31/2021—Continued
jbell on DSKJLSW7X2PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Modified Saccharomyces cerevisiae enhanced
ethanol yield.
(G) Modified Saccharomyces cerevisiae enhanced
ethanol yield.
(G) Alkyl ester, 2-({4-[2-(trisubstituted phenyl)azo]5-acetamido-2-substitutedphenyl} (substituted
alkoxy)amino).
(G) Cyclic sulfate.
(G) Alkanedioic acid, polymer with cycloalkyl
dimethanol, alkyl and cycloalkyl diisocyanates, dimethyl-alkanediol, dihydroxyalkanoic acid
methylenebis[isocyanatocyclohexane, hydroxyethyl acrylate- and polyalkyl glycol monoalkyl
ether blocked.
(G) Alkanoic acid, alkyl ester, manuf. of, byproducts
from, distn. residues.
(G) Acrylic and Methacrylic acids and esters, polymer with alkenylimidazole, alkyl polyalkylene glycol, alkenylbenzene, alkylbenzeneperoxoic acid
ester initiated, compds. with Dialkylaminoalkanol.
(G) Polysaccharide, polymer with unsaturated carboxylic acid and methacryloxyethyltrimethyl ammonium chloride, sodium salt, acid salt initiated.
(G) Polysaccharide, polymer with unsaturated carboxylic acid and methacryloxyethyltrimethyl ammonium chloride, sodium salt, acid salt initiated.
(G) Dicarboxylic acid, compd. with aminoalkylalkyldiamine alkyldioate alkyldioate (1:2:1:1).
(G) Dicarboxylic acid, compd. with aminoalkylalkyldiamine (3:2).
(G) Alkyldiamine, aminoalkyl-, hydrochloride (1:3).
J–21–0005A .......
4
03/05/2021
CBI ..........................
(G) Chemical production ..........................
J–21–0006A .......
4
03/05/2021
CBI ..........................
(G) Chemical production ..........................
P–16–0404A ......
6
03/01/2021
CBI ..........................
P–18–0281A ......
P–18–0301A ......
5
4
03/26/2021
03/31/2021
CBI ..........................
CBI ..........................
(G) A colorant for dyeing various synthetic fibers and fabrics. Open, nondispersive use.
(G) Electrolyte additive ............................
(G) Coating component ...........................
P–18–0326A ......
10
03/29/2021
CBI ..........................
(G) Chemical Intermediate .......................
P–18–0378A ......
6
03/18/2021
CBI ..........................
(G) Industrial coatings additive ................
P–20–0058A ......
6
03/18/2021
CBI ..........................
(G) Additive for automatic dishwashing,
Additive for hard surface cleaner.
P–20–0058A ......
7
03/19/2021
CBI ..........................
(G) Additive for automatic dishwashing,
Additive for hard surface cleaner.
P–20–0078A ......
7
03/24/2021
(G) Stabilizer for industrial applications ...
P–20–0079A ......
7
03/24/2021
P–20–0080A ......
10
03/24/2021
P–20–0081A ......
10
03/24/2021
P–20–0082A ......
10
03/24/2021
P–20–0144A ......
5
03/01/2021
Ascend Performance Materials.
Ascend Performance Materials.
Ascend Performance Materials.
Ascend Performance Materials.
Ascend Performance Materials.
CBI ..........................
P–20–0148A ......
6
03/15/2021
Solugen Inc .............
P–20–0148A ......
7
03/22/2021
Solugen Inc .............
P–20–0149A ......
6
03/15/2021
Solugen Inc .............
P–20–0149A ......
7
03/22/2021
Solugen Inc .............
P–20–0150A ......
6
03/15/2021
Solugen Inc .............
P–20–0150A ......
7
03/22/2021
Solugen Inc .............
P–20–0151A ......
6
03/15/2021
Solugen Inc .............
P–20–0151A ......
7
03/22/2021
Solugen Inc .............
P–20–0169A ......
6
03/15/2021
CBI ..........................
P–20–0169A ......
7
03/26/2021
CBI ..........................
P–20–0174A ......
5
03/16/2021
P2 Science, Inc ......
P–20–0184A ......
3
03/16/2021
P2 Science, Inc ......
P–21–0012A ......
4
03/24/2021
CBI ..........................
P–21–0028 .........
2
03/01/2021
CBI ..........................
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Battery Plastics and coatings applications, Conductive agent for conductive plastic and paint.
(G) Battery Plastics and coatings applications, Conductive agent for conductive plastic and paint.
(S) For use in consumer products, as
well as direct addition to consumer
products. Specific functions would be
as solubilizer, rheology modifier and
fragrance oil.
(S) For use in fragrances for consumer
products, as well as direct addition to
consumer products. Specific functions
would be as solubilizer, rheology modifier and fragrance oil.
(G) The notified substance will be used
as a fragrance ingredient.
(G) Hardener for composite applications
P–21–0029 .........
2
03/01/2021
CBI ..........................
P–21–0066A ......
5
03/02/2021
L & L Products ........
VerDate Sep<11>2014
18:52 Apr 26, 2021
Jkt 253001
PO 00000
(G) Stabilizer for industrial applications ...
(G) Stabilizer for industrial applications ...
(G) A stabilizer for industrial applications
(G) Stabilizer for industrial applications ...
(G) Asphalt emulsion applications ...........
(G) Bulk formulated mixture for research
and development purposes only.
(S) Blended or stand alone, epoxy curative (hardener) and foaming agent
when blended with certain ingredients.
Frm 00071
Fmt 4703
Sfmt 4703
(G) Carboxylic acid, compd. with aminoalkylalkyldiamine (3:1).
(G) Alkyldiamine, aminoalkyl-, carboxylate (1:3).
(S) Fatty acids, soya, reaction products with
polyethylenepolyamines.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(S) multiwalled carbon nanotube.
(S) multiwalled carbon nanotube.
(S) 6-Octen-1-ol, 3,7-dimethyl-, homopolymer,
monoacetate.
(S) 6-Octen-1-ol, 3,7-dimethyl-, homopolymer.
(G) Multialkylbicycloalkenyl substituted
propanenitrile.
(G) Phenol, methylethylidene, polymer chloromethyl
epoxide and methylethylidene bis-oxy, bis-amine.
(G) Amine, methylethylidenebis(oxy).
(G) 1,2-alkanediol, 3 aryloxy, mono phosphate
ester.
E:\FR\FM\27APN1.SGM
27APN1
Federal Register / Vol. 86, No. 79 / Tuesday, April 27, 2021 / Notices
22201
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2021 TO 03/31/2021—Continued
Case No.
Received
date
Version
Manufacturer
Use
(G) Marine engine oil additive, polymer
additive, Greases, Refrigeration oil,
Metal working fluid, Industrial drilling
oil, Industrial Rolling oil, Compressor
Oil, hydraulic oil, Inudstrial turbine oil,
Industrial gear oil, Automotive engine
oil additive, Automotive gear oil.
(G) Automotive engine oil additive, polymer additive Greases, Refrigeration oil,
Metal working fluid, Industrial drilling
oil, Industrial Rolling oil, Compressor
Oil, hydraulic oil, Inudstrial turbine oil,
Industrial gear oil, Automotive gear oil,
Marine engine oil additive.
(G) Component in paving formulations ....
P–21–0086 .........
3
03/18/2021
Croda Inc ................
P–21–0086A ......
4
03/26/2021
CRODA INC ...........
P–21–0090 .........
3
03/02/2021
CBI ..........................
P–21–0091 .........
3
03/12/2021
CBI ..........................
P–21–0092 .........
3
03/09/2021
P–21–0094 .........
1
03/01/2021
Miwon North America, Inc..
CBI ..........................
P–21–0095 .........
4
03/16/2021
CBI ..........................
P–21–0095A ......
5
03/30/2021
CBI ..........................
P–21–0097 .........
1
03/05/2021
CBI ..........................
P–21–0098 .........
3
03/18/2021
Hubergroup .............
P–21–0100 .........
1
03/24/2021
P–21–0101 .........
1
03/24/2021
SN–20–0007A ....
2
03/08/2021
ENI Trading & Shipping Inc.
ENI Trading & Shipping Inc.
CBI ..........................
SN–21–0003 ......
1
03/02/2021
Norquay Technology
Inc.
Chemical substance
(G) Laundry detergent additive/emulsifier., emulsifier—water treatment,
Emulsifier, Industrial fluid, Coatings
and Plastics.
(S) thermoset composites, industrial
coatings, 3D printing.
(S) Deposition precursor for the manufacture of electronic components.
(S) Crankcase Motor Oil applications,
formulated transmission oils. Industrial
applications (especially compressor
and gear fluids).
(S) Crankcase Motor Oil applications,
formulated transmission oils. Industrial
applications (especially compressor
and gear fluids).
(S) Plasticizer for use in dryblend applications (i.e.—injection molding, slush
molding, extrusion, calendering), Component in lubricants and industrial oils,
Plastisol in spread-coating applications..
(S) Co-initiator for the curing of UV printing inks.
(G) Used as a lubricant and lubricant additive, Lubricant and lubricant additive.
(G) Used as a lubricant and lubricant additive, Lubricant and lubricant additive.
(S) A component of UV Curable Coatings and Printing Inks.
(G) Intermediate .......................................
(S) Isooctadecanamide, N,N-bis(2-ethylhexyl).
(S) Isooctadecanamide, N,N-bis(2-ethylhexyl).
(G) Lignin, modified, reaction products with
alkylamine by-products.
(G) Fatty acid esters polymer with Dicarboxylic
Acid.
(G) 2-Propenoic acid, (polyhydro-1,3-dioxo-2Hisoindol-2-yl)alkyl ester.
(G) Silane, halogenated.
(G) Alkene Homopolymer Hydrogenated.
(G) Alkene Homopolymer Hydrogenated.
(S) 1,2,4-Benzenetricarboxylic acid, trinonyl ester,
branched and linear.
(G) Poly(oxy-1,2-ethanediyl), alpha-hydro-omega[2(or 3)-[[substituted benzoyl]oxy]hydroxypropoxyl]-, alpha, alpha′, alpha″
-ether with 2-ethyl-2-(hydroxymethyl)-1,3propanediol (3:1).
(G) Raffinates (petroleum), vacuum distillate solvent, solvent-dewaxed, hydrotreated.
(G) Benzenesulfonic acid, polyalkyl derivs., calcium
salts.
(S) 2-Propenoic acid, 1,1′-(3-methyl-1,5pentanediyl) ester.
(S) 1,1′-Biphenyl, 4,4′-dibromo-.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 03/01/2021 TO 03/31/2021
Received date
Commencement
date
If amendment,
type of
amendment
P–01–0925 .....
03/30/2021
04/16/2004
N ....................
P–01–0926 .....
P–17–0390 .....
03/30/2021
03/09/2021
04/16/2004
02/27/2021
N ....................
N ....................
jbell on DSKJLSW7X2PROD with NOTICES
Case No.
VerDate Sep<11>2014
18:52 Apr 26, 2021
Jkt 253001
PO 00000
Frm 00072
Fmt 4703
Chemical substance
(G) 1,2 ethanediamine, n-[3-trimethoxysilyl) propyl] reaction product with
silanes.
(G) 2-propenoic acid, 2-methyl-butyl ester polymer.
(G) Carbomonocyclic dicarboxylic acid, polymer with alkenedioic acid,
substituted heteropolycycle, substituted heteromonocycle, alkanediol,
alkanedioic acid, alkoxylated substituted dicarbomonocycle,
alkoxylated substituted dicarbomonocycle and alkanetriol,
carbomonocyclic carboxylate alkanoate.
Sfmt 4703
E:\FR\FM\27APN1.SGM
27APN1
22202
Federal Register / Vol. 86, No. 79 / Tuesday, April 27, 2021 / Notices
TABLE II—NOCS APPROVED * FROM 03/01/2021 TO 03/31/2021—Continued
Received date
Commencement
date
If amendment,
type of
amendment
P–18–0308 .....
P–20–0094 .....
P–20–0097 .....
03/15/2021
03/23/2021
03/29/2021
02/23/2021
03/17/2021
03/24/2021
N ....................
N ....................
N ....................
P–20–0185 .....
03/12/2021
03/09/2021
N ....................
P–87–0115 .....
03/05/2021
02/26/2021
N ....................
Case No.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
Chemical substance
(G) Bis[(hydroxyalkoxy)aryl]carbopolycyclic.
(G) Aliphatic urethane methacrylate.
(G) Butanedioic acid, monopolyisobutylene derivs., mixed dihydroxyalkyl
and hydroxyalkoxyalkyl diesters.
(S) Amines, c36-alkylenedi-, polymers with
bicyclo[2.2.1]heptanedimethanamine, [5,5′-biisobenzofuran]-1,1′,3,3′tetrone and 3a,4,5,7a-tetrahydro-7-methyl-5-(tetrahydro-2,5-dioxo-3furanyl)-1,3-benzofurandione, maleated.
(G) Polyurethane prepolymer.
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 03/01/2021 TO 03/31/2021
Case No.
Received date
Type of test information
Chemical substance
L–21–0067 ......
03/11/2021
Fish Acute Toxicity Test and Earthworm Acute Toxicity Test.
Fish Acute Toxicity Test and Earthworm Acute Toxicity Test.
Fish Acute Toxicity Test, Freshwater, and Marine
(OCSPP Test Guideline 850.1075).
L–21–0067 ......
03/11/2021
P–16–0404A ....
03/01/2021
P–18–0294 ......
03/10/2021
Chemilian H4000 XP: ToxTracker ACE Assay ...........
P–18–0350 ......
03/08/2021
P–18–0374 ......
03/08/2021
Surface Tension of Aqueous Solutions (Test Guideline OECD 115).
Surface Tension of Aqueous Solutions (Test Guideline OECD 115).
(G) Graphene nanoplatelet.
(G) Graphene nanoplatelets.
(G) Alkyl ester, 2-({4-[2-(trisubstituted phenyl)azo]-5acetamido-2-substitutedphenyl} (substituted
alkoxy)amino).
(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl
ester.
(G) Aqueous methacrylamido modified polysiloxane.
(G) Cationic aminomodified alkylpolysiloxane.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: April 19, 2021.
Pamela Myrick,
Director, Project Management and Operations
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2021–08756 Filed 4–26–21; 8:45 am]
BILLING CODE 6560–50–P
jbell on DSKJLSW7X2PROD with NOTICES
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPP–2017–0720; FRL–10022–66]
Pesticide Registration Review;
Pesticide Dockets Opened for Review
and Comment; Notice of Availability
Environmental Protection
Agency (EPA).
AGENCY:
VerDate Sep<11>2014
18:52 Apr 26, 2021
Jkt 253001
ACTION:
Notice.
This notice announces the
availability of the EPA’s preliminary
work plan for the following chemical:
Metrafenone. With this document, the
EPA is opening the public comment
period for registration review for this
chemical.
SUMMARY:
Comments must be received on
or before June 28, 2021.
ADDRESSES: Submit your comments, to
the docket identification (ID) number for
the specific pesticide of interest
provided in the Table in Unit IV, by one
of the following methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: OPP Docket, Environmental
Protection Agency Docket Center (EPA/
DC), (28221T), 1200 Pennsylvania Ave.
NW, Washington, DC 20460–0001.
DATES:
PO 00000
Frm 00073
Fmt 4703
Sfmt 4703
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on commenting
or visiting the docket, along with more
information about dockets generally, are
available at https://www.epa.gov/
dockets.
For
pesticide specific information, contact:
The Chemical Review Manager for the
pesticide of interest identified in the
Table in Unit IV.
For general questions on the
registration review program, contact:
Melanie Biscoe, Pesticide Re-Evaluation
Division (7508P), Office of Pesticide
Programs, Environmental Protection
Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460–0001; telephone
number: (703) 305–7106; email address:
biscoe.melanie@epa.gov.
FOR FURTHER INFORMATION CONTACT:
SUPPLEMENTARY INFORMATION:
E:\FR\FM\27APN1.SGM
27APN1
]]>Agencies
[Federal Register Volume 86, Number 79 (Tuesday, April 27, 2021)]
[Notices]
[Pages 22198-22202]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-08756]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2021-0068; FRL-10022-83]
Certain New Chemicals; Receipt and Status Information for March
2021
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA, including notice of receipt of a Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or Microbial Commercial Activity
Notice (MCAN), including an amended notice or test information; an
exemption application (Biotech exemption); an application for a test
marketing exemption (TME), both pending and/or concluded; a notice of
commencement (NOC) of manufacture (including import) for new chemical
substances; and a periodic status report on new chemical substances
that are currently under EPA review or have recently concluded review.
This document covers the period from 03/01/2021 to 03/31/2021.
DATES: Comments identified by the specific case number provided in this
document must be received on or before May 27, 2021.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2021-0068, and the specific case number for the
chemical substance related to your comment, through the Federal
eRulemaking Portal at https://www.regulations.gov. Follow the online
instructions for submitting comments. Do not submit electronically any
information you consider to be Confidential Business Information (CBI)
or other information whose disclosure is restricted by statute.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
Due to the public health emergency, the EPA Docket Center (EPA/DC)
and Reading Room is closed to visitors with limited exceptions. The
staff continues to provide remote customer service via email, phone,
and webform. For the latest status information on EPA/DC services and
docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management
and Operations Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 03/01/2021 to 03/31/2021. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended Toxic Substances Control Act (TSCA),
including the TSCA section 5 PMN/SNUN/MCAN and exemption notices
received, the date of receipt, the final EPA determination on the
notice, and the effective date of EPA's determination for PMN/SNUN/MCAN
notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices.
This information is updated on a weekly basis.
[[Page 22199]]
B. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA published individual notices reflecting the status
of TSCA section 5 filings received, pending or concluded. In 1995, the
Agency modified its approach and streamlined the information published
in the Federal Register after providing notice of such changes to the
public and an opportunity to comment (See the Federal Register of May
12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage of the
Lautenberg amendments to TSCA in 2016, public interest in information
on the status of section 5 cases under EPA review and, in particular,
the final determination of such cases, has increased. In an effort to
be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 03/01/2021 to 03/31/2021
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-21-0004.............. 3 01/25/2021 Danisco US, Inc..... (G) Production of a (G) Genetically
chemical substance. modified
microorganism for
the production of
a chemical
substance.
[[Page 22200]]
J-21-0005A............. 4 03/05/2021 CBI................. (G) Chemical (G) Modified
production. Saccharomyces
cerevisiae
enhanced ethanol
yield.
J-21-0006A............. 4 03/05/2021 CBI................. (G) Chemical (G) Modified
production. Saccharomyces
cerevisiae
enhanced ethanol
yield.
P-16-0404A............. 6 03/01/2021 CBI................. (G) A colorant for (G) Alkyl ester, 2-
dyeing various ({4-[2-
synthetic fibers (trisubstituted
and fabrics. Open, phenyl)azo]-5-
non-dispersive use. acetamido-2-
substitutedphenyl{
t (substituted
alkoxy)amino).
P-18-0281A............. 5 03/26/2021 CBI................. (G) Electrolyte (G) Cyclic sulfate.
additive.
P-18-0301A............. 4 03/31/2021 CBI................. (G) Coating (G) Alkanedioic
component. acid, polymer with
cycloalkyl
dimethanol, alkyl
and cycloalkyl
diisocyanates,
dimethyl-
alkanediol,
dihydroxyalkanoic
acid
methylenebis[isocy
anatocyclohexane,
hydroxyethyl
acrylate- and
polyalkyl glycol
monoalkyl ether
blocked.
P-18-0326A............. 10 03/29/2021 CBI................. (G) Chemical (G) Alkanoic acid,
Intermediate. alkyl ester,
manuf. of,
byproducts from,
distn. residues.
P-18-0378A............. 6 03/18/2021 CBI................. (G) Industrial (G) Acrylic and
coatings additive. Methacrylic acids
and esters,
polymer with
alkenylimidazole,
alkyl polyalkylene
glycol,
alkenylbenzene,
alkylbenzeneperoxo
ic acid ester
initiated, compds.
with
Dialkylaminoalkano
l.
P-20-0058A............. 6 03/18/2021 CBI................. (G) Additive for (G) Polysaccharide,
automatic polymer with
dishwashing, unsaturated
Additive for hard carboxylic acid
surface cleaner. and
methacryloxyethylt
rimethyl ammonium
chloride, sodium
salt, acid salt
initiated.
P-20-0058A............. 7 03/19/2021 CBI................. (G) Additive for (G) Polysaccharide,
automatic polymer with
dishwashing, unsaturated
Additive for hard carboxylic acid
surface cleaner. and
methacryloxyethylt
rimethyl ammonium
chloride, sodium
salt, acid salt
initiated.
P-20-0078A............. 7 03/24/2021 Ascend Performance (G) Stabilizer for (G) Dicarboxylic
Materials. industrial acid, compd. with
applications. aminoalkyl-
alkyldiamine
alkyldioate
alkyldioate
(1:2:1:1).
P-20-0079A............. 7 03/24/2021 Ascend Performance (G) Stabilizer for (G) Dicarboxylic
Materials. industrial acid, compd. with
applications. aminoalkyl-
alkyldiamine
(3:2).
P-20-0080A............. 10 03/24/2021 Ascend Performance (G) Stabilizer for (G) Alkyldiamine,
Materials. industrial aminoalkyl-,
applications. hydrochloride
(1:3).
P-20-0081A............. 10 03/24/2021 Ascend Performance (G) A stabilizer for (G) Carboxylic
Materials. industrial acid, compd. with
applications. aminoalkyl-
alkyldiamine
(3:1).
P-20-0082A............. 10 03/24/2021 Ascend Performance (G) Stabilizer for (G) Alkyldiamine,
Materials. industrial aminoalkyl-,
applications. carboxylate (1:3).
P-20-0144A............. 5 03/01/2021 CBI................. (G) Asphalt emulsion (S) Fatty acids,
applications. soya, reaction
products with
polyethylenepolyam
ines.
P-20-0148A............. 6 03/15/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0148A............. 7 03/22/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0149A............. 6 03/15/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0149A............. 7 03/22/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0150A............. 6 03/15/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0150A............. 7 03/22/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0151A............. 6 03/15/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0151A............. 7 03/22/2021 Solugen Inc......... (G) Additive for (G) Hydroxyalkanoic
consumer, acid, salt,
industrial, and oxidized.
commercial uses.
P-20-0169A............. 6 03/15/2021 CBI................. (G) Battery Plastics (S) multiwalled
and coatings carbon nanotube.
applications,
Conductive agent
for conductive
plastic and paint.
P-20-0169A............. 7 03/26/2021 CBI................. (G) Battery Plastics (S) multiwalled
and coatings carbon nanotube.
applications,
Conductive agent
for conductive
plastic and paint.
P-20-0174A............. 5 03/16/2021 P2 Science, Inc..... (S) For use in (S) 6-Octen-1-ol,
consumer products, 3,7-dimethyl-,
as well as direct homopolymer,
addition to monoacetate.
consumer products.
Specific functions
would be as
solubilizer,
rheology modifier
and fragrance oil.
P-20-0184A............. 3 03/16/2021 P2 Science, Inc..... (S) For use in (S) 6-Octen-1-ol,
fragrances for 3,7-dimethyl-,
consumer products, homopolymer.
as well as direct
addition to
consumer products.
Specific functions
would be as
solubilizer,
rheology modifier
and fragrance oil.
P-21-0012A............. 4 03/24/2021 CBI................. (G) The notified (G)
substance will be Multialkylbicycloa
used as a fragrance lkenyl substituted
ingredient. propanenitrile.
P-21-0028.............. 2 03/01/2021 CBI................. (G) Hardener for (G) Phenol,
composite methylethylidene,
applications. polymer
chloromethyl
epoxide and
methylethylidene
bis-oxy, bis-
amine.
P-21-0029.............. 2 03/01/2021 CBI................. (G) Bulk formulated (G) Amine,
mixture for methylethylidenebi
research and s(oxy).
development
purposes only.
P-21-0066A............. 5 03/02/2021 L & L Products...... (S) Blended or stand (G) 1,2-alkanediol,
alone, epoxy 3 aryloxy, mono
curative (hardener) phosphate ester.
and foaming agent
when blended with
certain ingredients.
[[Page 22201]]
P-21-0086.............. 3 03/18/2021 Croda Inc........... (G) Marine engine (S)
oil additive, Isooctadecanamide,
polymer additive, N,N-bis(2-
Greases, ethylhexyl).
Refrigeration oil,
Metal working
fluid, Industrial
drilling oil,
Industrial Rolling
oil, Compressor
Oil, hydraulic oil,
Inudstrial turbine
oil, Industrial
gear oil,
Automotive engine
oil additive,
Automotive gear oil.
P-21-0086A............. 4 03/26/2021 CRODA INC........... (G) Automotive (S)
engine oil Isooctadecanamide,
additive, polymer N,N-bis(2-
additive Greases, ethylhexyl).
Refrigeration oil,
Metal working
fluid, Industrial
drilling oil,
Industrial Rolling
oil, Compressor
Oil, hydraulic oil,
Inudstrial turbine
oil, Industrial
gear oil,
Automotive gear
oil, Marine engine
oil additive.
P-21-0090.............. 3 03/02/2021 CBI................. (G) Component in (G) Lignin,
paving formulations. modified, reaction
products with
alkylamine by-
products.
P-21-0091.............. 3 03/12/2021 CBI................. (G) Laundry (G) Fatty acid
detergent additive/ esters polymer
emulsifier., with Dicarboxylic
emulsifier--water Acid.
treatment,
Emulsifier,
Industrial fluid,
Coatings and
Plastics.
P-21-0092.............. 3 03/09/2021 Miwon North America, (S) thermoset (G) 2-Propenoic
Inc.. composites, acid, (polyhydro-
industrial 1,3-dioxo-2H-
coatings, 3D isoindol-2-
printing. yl)alkyl ester.
P-21-0094.............. 1 03/01/2021 CBI................. (S) Deposition (G) Silane,
precursor for the halogenated.
manufacture of
electronic
components.
P-21-0095.............. 4 03/16/2021 CBI................. (S) Crankcase Motor (G) Alkene
Oil applications, Homopolymer
formulated Hydrogenated.
transmission oils.
Industrial
applications
(especially
compressor and gear
fluids).
P-21-0095A............. 5 03/30/2021 CBI................. (S) Crankcase Motor (G) Alkene
Oil applications, Homopolymer
formulated Hydrogenated.
transmission oils.
Industrial
applications
(especially
compressor and gear
fluids).
P-21-0097.............. 1 03/05/2021 CBI................. (S) Plasticizer for (S) 1,2,4-
use in dryblend Benzenetricarboxyl
applications (i.e.-- ic acid, trinonyl
injection molding, ester, branched
slush molding, and linear.
extrusion,
calendering),
Component in
lubricants and
industrial oils,
Plastisol in spread-
coating
applications..
P-21-0098.............. 3 03/18/2021 Hubergroup.......... (S) Co-initiator for (G) Poly(oxy-1,2-
the curing of UV ethanediyl), alpha-
printing inks. hydro-omega-[2(or
3)-[[substituted
benzoyl]oxy]hydrox
ypropoxyl]-,
alpha, alpha',
alpha'' -ether
with 2-ethyl-2-
(hydroxymethyl)-
1,3-propanediol
(3:1).
P-21-0100.............. 1 03/24/2021 ENI Trading & (G) Used as a (G) Raffinates
Shipping Inc. lubricant and (petroleum),
lubricant additive, vacuum distillate
Lubricant and solvent, solvent-
lubricant additive. dewaxed,
hydrotreated.
P-21-0101.............. 1 03/24/2021 ENI Trading & (G) Used as a (G) Benzenesulfonic
Shipping Inc. lubricant and acid, polyalkyl
lubricant additive, derivs., calcium
Lubricant and salts.
lubricant additive.
SN-20-0007A............ 2 03/08/2021 CBI................. (S) A component of (S) 2-Propenoic
UV Curable Coatings acid, 1,1'-(3-
and Printing Inks. methyl-1,5-
pentanediyl)
ester.
SN-21-0003............. 1 03/02/2021 Norquay Technology (G) Intermediate.... (S) 1,1'-Biphenyl,
Inc. 4,4'-dibromo-.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 03/01/2021 to 03/31/2021
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-01-0925............... 03/30/2021 04/16/2004 N....................... (G) 1,2 ethanediamine, n-
[3-trimethoxysilyl)
propyl] reaction product
with silanes.
P-01-0926............... 03/30/2021 04/16/2004 N....................... (G) 2-propenoic acid, 2-
methyl-butyl ester
polymer.
P-17-0390............... 03/09/2021 02/27/2021 N....................... (G) Carbomonocyclic
dicarboxylic acid,
polymer with alkenedioic
acid, substituted
heteropolycycle,
substituted
heteromonocycle,
alkanediol, alkanedioic
acid, alkoxylated
substituted
dicarbomonocycle,
alkoxylated substituted
dicarbomonocycle and
alkanetriol,
carbomonocyclic
carboxylate alkanoate.
[[Page 22202]]
P-18-0308............... 03/15/2021 02/23/2021 N....................... (G)
Bis[(hydroxyalkoxy)aryl]c
arbopolycyclic.
P-20-0094............... 03/23/2021 03/17/2021 N....................... (G) Aliphatic urethane
methacrylate.
P-20-0097............... 03/29/2021 03/24/2021 N....................... (G) Butanedioic acid,
monopolyisobutylene
derivs., mixed
dihydroxyalkyl and
hydroxyalkoxyalkyl
diesters.
P-20-0185............... 03/12/2021 03/09/2021 N....................... (S) Amines, c36-alkylenedi-
, polymers with
bicyclo[2.2.1]heptanedime
thanamine, [5,5'-
biisobenzofuran]-
1,1',3,3'-tetrone and
3a,4,5,7a-tetrahydro-7-
methyl-5-(tetrahydro-2,5-
dioxo-3-furanyl)-1,3-
benzofurandione,
maleated.
P-87-0115............... 03/05/2021 02/26/2021 N....................... (G) Polyurethane
prepolymer.
----------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 03/01/2021 to 03/31/2021
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-21-0067..................... 03/11/2021 Fish Acute Toxicity Test and (G) Graphene nanoplatelet.
Earthworm Acute Toxicity Test.
L-21-0067..................... 03/11/2021 Fish Acute Toxicity Test and (G) Graphene nanoplatelets.
Earthworm Acute Toxicity Test.
P-16-0404A.................... 03/01/2021 Fish Acute Toxicity Test, (G) Alkyl ester, 2-({4-[2-
Freshwater, and Marine (OCSPP (trisubstituted phenyl)azo]-5-
Test Guideline 850.1075). acetamido-2-
substitutedphenyl{time}
(substituted alkoxy)amino).
P-18-0294..................... 03/10/2021 Chemilian H4000 XP: ToxTracker (S) Propanedioic acid, 2-
ACE Assay. methylene-, 1,3-dicyclohexyl
ester.
P-18-0350..................... 03/08/2021 Surface Tension of Aqueous (G) Aqueous methacrylamido
Solutions (Test Guideline OECD modified polysiloxane.
115).
P-18-0374..................... 03/08/2021 Surface Tension of Aqueous (G) Cationic aminomodified
Solutions (Test Guideline OECD alkylpolysiloxane.
115).
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: April 19, 2021.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2021-08756 Filed 4-26-21; 8:45 am]
BILLING CODE 6560-50-P
