Certain New Chemicals; Receipt and Status Information for February 2021, 15478-15482 [2021-05927]
Download as PDF
15478
Federal Register / Vol. 86, No. 54 / Tuesday, March 23, 2021 / Notices
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2021–0068; FRL–10021–
62]
Certain New Chemicals; Receipt and
Status Information for February 2021
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 02/01/2021 to
02/28/2021.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
April 22, 2021.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2021–0068
and the specific case number for the
chemical substance related to your
comment, by using the Federal
eRulemaking Portal at https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
Due to the public health concerns
related to COVID–19, the EPA Docket
Center (EPA/DC) and Reading Room is
closed to visitors with limited
exceptions. The staff continues to
provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Project Management and
SUMMARY:
VerDate Sep<11>2014
17:45 Mar 22, 2021
Jkt 253001
Operations Division (7407M), Office of
Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
What action is the Agency taking?
This document provides the receipt
and status reports for the period from
02/01/2021 to 02/28/2021. The Agency
is providing notice of receipt of PMNs,
SNUNs, and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
E:\FR\FM\23MRN1.SGM
23MRN1
Federal Register / Vol. 86, No. 54 / Tuesday, March 23, 2021 / Notices
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995 (60 FR
25798) (FRL–4942–7). Since the passage
of the Lautenberg amendments to TSCA
in 2016, public interest in information
on the status of section 5 cases under
EPA review and, in particular, the final
determination of such cases, has
increased. In an effort to be responsive
to the regulated community, the users of
this information, and the general public,
to comply with the requirements of
TSCA, to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
15479
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2021 TO 02/28/2021
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
J–21–0005 ......
3
01/14/2021
CBI ................
(G) Chemical production ..........................
J–21–0006 ......
3
01/14/2021
CBI ................
(G) Chemical production ..........................
P–18–0128A ...
5
02/22/2021
CBI ................
(G) Surface modifier .................................
P–18–0135A ...
P–18–0256A ...
P–18–0273A ...
5
5
7
02/03/2021
02/10/2021
02/25/2021
CBI ................
CBI ................
CBI ................
(G) Ingredient for household products .....
(G) Chemical Intermediate .......................
(G) Used in polymer manufacturing .........
P–18–0289A ...
9
02/15/2021
(G) Gas scrubbing, landfill deoderizing ....
P–18–0289A ...
10
02/15/2021
(G) Gas scrubbing, landfill deoderizing ....
(G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
P–18–0290A ...
9
02/15/2021
10
02/15/2021
P–18–0293A ...
8
02/02/2021
P–18–0293A ...
9
02/02/2021
Sirrus, Inc ......
P–18–0294A ...
8
02/02/2021
Sirrus, Inc ......
(G) Gas scrubbing, wastewater deodorizing.
(G) Gas scrubbing, wastewater deodorizing.
(S) Intermediate: Monomer used as a
chemical, in the manufacture of polymers, Adhesives: Monomer used in the
manufacture (formulation) of adhesives, Coatings: Monomer used in the
manufacture of industrial coatings.
(S) Intermediate: Monomer used as a
chemical, in the manufacture of polymers, Adhesives: Monomer used in the
manufacture (formulation) of adhesives, Coatings: Monomer used in the
manufacture of industrial coatings.
(S) Intermediate: Monomer for use in
emulsion polymers, Adhesives: Monomer for use in formulated industrial
adhesives, Coatings: Monomer for use
in formulated industrial coatings.
(G) Carbomonocylic-oxazolidine.
P–18–0290A ...
Guard Products.
Guard Products.
Guard Products.
Guard Products.
Sirrus, Inc ......
(G) Modified Saccharomyces cerevisiae enhanced ethanol
yield.
(G) Modified Saccharomyces cerevisiae enhanced ethanol
yield.
(S) Inulin, 2-hydroxy-3-(trimethylammonio)propyl ether, chloride.
(S) 1,2-Decanediol.
(S) Undecanol, branched.
(S) 1,4-Cyclohexanedicarboxylic acid, 1,4-bis(2-ethylhexyl)
ester.
(G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
VerDate Sep<11>2014
17:45 Mar 22, 2021
Jkt 253001
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
(G) Carbomonocylic-oxazolidine.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
E:\FR\FM\23MRN1.SGM
23MRN1
15480
Federal Register / Vol. 86, No. 54 / Tuesday, March 23, 2021 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2021 TO 02/28/2021—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–18–0294A ...
9
02/02/2021
Sirrus, Inc ......
P–18–0301A ...
3
02/02/2021
CBI ................
(S) Intermediate: Monomer used as a
chemical, in the manufacture of polymers, Adhesives: Monomer used in the
manufacture (formulation) of adhesives, Coatings: Monomer used in the
manufacture of industrial coatings.
(G) Coating component ............................
P–18–0383A ...
5
02/02/2021
CBI ................
(G) Coatings and inks for commercial use
P–19–0122A ...
4
02/10/2021
CBI ................
P–19–0160A ...
3
02/09/2021
CBI ................
(G) Reactant monomer in a polymer for
industrial use.
(S) Component of a UV curable printing
ink.
P–20–0071A ...
9
02/18/2021
CBI ................
(G) Colorant ..............................................
P–20–0083A ...
3
02/10/2021
CBI ................
P–20–0097A ...
5
02/19/2021
Nelson Brothers, LLC.
P–20–0110A ...
2
02/02/2021
P–20–0124A ...
2
02/05/2021
Clariant Corporation.
CBI ................
P–20–0126A ...
2
02/05/2021
CBI ................
P–20–0132A ...
2
02/08/2021
P–20–0148A ...
3
01/29/2021
Designer Molecules, Inc.
Solugen, Inc ..
(G) Reactant monomer in a polymer for
industrial use.
(S) The PMN substance will be used as
an emulsifier for applications in explosives.
(S) Base oil additive for lubricants and
greases.
(G) Additive in Household consumer
products.
(G) Additive in household consumer products.
(G) Adhesive component ..........................
P–20–0148A ...
4
02/08/2021
Solugen, Inc ..
P–20–0148A ...
5
02/10/2021
Solugen, Inc ..
P–20–0149A ...
3
01/29/2021
Solugen, Inc ..
P–20–0149A ...
4
02/08/2021
Solugen, Inc ..
P–20–0149A ...
5
02/10/2021
Solugen, Inc ..
P–20–0150A ...
3
01/29/2021
Solugen, Inc ..
P–20–0150A ...
4
02/08/2021
Solugen, Inc ..
P–20–0150A ...
5
02/10/2021
Solugen, Inc ..
P–20–0151A ...
3
01/29/2021
Solugen, Inc ..
P–20–0151A ...
4
02/08/2021
Solugen, Inc ..
P–20–0151A ...
5
02/10/2021
Solugen, Inc ..
P–20–0167A ...
4
02/11/2021
P–20–0168A ...
6
02/10/2021
W.R. Grace &
Co.—Conn.
CBI ................
P–20–0183A ...
3
02/10/2021
CBI ................
(S) Lubricating additives for engine oils,
transmission and hydraulic fluid and
gear oil applications.
(G) Intermediate .......................................
P–21–0015A ...
2
01/28/2021
Designer Molecules, Inc.
(S) As a raw material in a Temporary
Bonding Adhesive formulation.
P–21–0036 ......
2
02/04/2021
CBI ................
P–21–0039A ...
2
02/03/2021
Sinova Specialties, Inc.
(G) Additive in Household consumer
products.
(S) Part of a series of chemicals used as
viscosity modifiers in commercial and
consumer engine oil.
VerDate Sep<11>2014
17:45 Mar 22, 2021
Jkt 253001
PO 00000
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Additive for consumer, industrial, and
commercial uses.
(G) Catalyst ..............................................
Frm 00029
Fmt 4703
Sfmt 4703
(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
(G) Alkanedioic acid, polymer with cycloalkyl dimethanol,
alkyl and cycloalkyl diisocyanates, dimethyl-alkanediol,
dihydroxyalkanoic acid
methylenebis[isocyanatocyclohexane, hydroxyethyl
acrylate- and polyalkyl glycol monoalkyl ether blocked.
(G) Dialkyl-alkanediamine, polymer with [(oxo-alkenyl)oxy]poly(oxy-alkanediyl)ether with bis(hydroxyalkyl)alkanediol.
(G) 2-propenoic acid, 2-(hydrogenated animal-based nitrogen-substituted) ethyl ester.
(G) Alkanesulfonic acid, 2-[(2-aminoethyl)heteroatom-substituted]-, sodium salt (1:1), polymer with alpha-[2,2bis(hydroxymethyl)butyl]-omega-methoxypoly(oxy-1,2ethanediyl) and 1,1′-methylenebis[4isocyanatocyclohexane], acrylic acid-dipenthaerythritol reaction products- and polypropylene glycol ether with pentaerythritol (4:1) triacrylate-blocked.
(G) Salt of 2-Naphthalenesulfonic acid, hydroxy [(methoxymethyl-4-sulfophenyl)diazenyl].
(G) 2-propenoic acid, nitrogen-substituted alkyl, N-C16-18acyl derivs.
(G) Butanedioic acid, monopolyisobutylene derivs., mixed
dihydroxyalkyl and hydroxyalkoxyalkyl diesters.
(G) Oxirane, 2-methyl-, polymer with oxirane,
(alkoxyalkoxy)alkyl alkyl ether.
(S) 5-octen-4-ol, 3,5-dimethyl-, (5E)-.
(S) 4-Decenal, 5,9-dimethyl-.
(S) 1H-Pyrrole-2,5-dione, 3-methyl-, 1,1′-C36-alkylenebis-.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Hydroxyalkanoic acid, salt, oxidized.
(G) Phenylene, alkyl and polycarbomonocycle substituted,
1,2-dicarboxylate.
(G) Polyolefin polyamine succinimide, carbopolycycle
alkoxylated.
(G) Aryl ether epoxide, homopolymer, ether with
alkanolamine.
(S) Amines, C36-alkylenedi-, polymers with 5,5′-[(1methylethylidene)bis(4,1-phenyleneoxy)]bis[1,3isobenzofurandione] and 4,4′-[2,2,2-trifluoro-1(trifluoromethyl)ethylidene]bis[2-aminophenol].
(S) 5-Hexen-2-one, 1-bicyclo[2.2.1]hept-2-yl-.
(S) 1,2,4,5-Benzenetetracarboxamide, N1, N2, N4, N5tetrahexyl-.
E:\FR\FM\23MRN1.SGM
23MRN1
Federal Register / Vol. 86, No. 54 / Tuesday, March 23, 2021 / Notices
15481
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2021 TO 02/28/2021—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–21–0040A ...
2
02/03/2021
Sinova Specialties, Inc.
P–21–0041A ...
2
02/03/2021
Sinova Specialties, Inc.
P–21–0051A ...
3
02/15/2021
Designer Molecules, Inc.
(S) Part of a series of chemicals used as
viscosity modifiers in commercial and
consumer engine oil.
(S) Part of a series of chemicals used as
viscosity modifiers in commercial and
consumer engine oil.
(G) Resin component of an adhesive formulation.
P–21–0055 ......
2
02/01/2021
Hexion, Inc ....
(G) adhesive used for coating formulation
P–21–0055A ...
3
02/04/2021
Hexion, Inc ....
(G) adhesive used for coating formulation
P–21–0055A ...
4
02/23/2021
Hexion, Inc ....
(G) adhesive used for coating formulation
P–21–0059 ......
2
02/17/2021
CBI ................
(G) Stabilizer .............................................
P–21–0060A ...
3
02/03/2021
CBI ................
(G) Isolated intermediate ..........................
P–21–0061A ...
3
02/03/2021
CBI ................
(G) Component in coatings ......................
P–21–0062A ...
3
02/03/2021
CBI ................
(G) Component in coatings ......................
P–21–0066 ......
4
02/08/2021
L & L Products.
P–21–0074A ...
2
02/15/2021
P–21–0075A ...
2
02/04/2021
Designer Molecules, Inc.
Allnex USA,
Inc.
(S) Blended or stand alone, epoxy curative (hardener) and foaming agent
when blended with certain ingredients.
(G) Resin component of an adhesive formulation.
(S) Coating Resin .....................................
P–21–0076 ......
2
02/09/2021
CBI ................
P–21–0077 ......
1
02/02/2021
P–21–0078 ......
1
02/02/2021
Rahn USA
Corp.
Pinova, Inc ....
P–21–0078A ...
2
02/23/2021
Pinova, Inc ....
(S) Tackifying additive used in tire manufacture; Tackifying additive used in hot
melt adhesive applications.
P–21–0079 ......
1
02/04/2021
CBI ................
P–21–0080 ......
2
02/10/2021
Allnex USA,
Inc.
(G) Additive in Household consumer
products.
(S) Binder for UV Curable Coating Resin
P–21–0081 ......
2
02/11/2021
CBI ................
P–21–0082 ......
1
02/05/2021
CBI ................
P–21–0083 ......
2
02/10/2021
Allnex, USA
Inc.
P–21–0084 ......
P–21–0085 ......
1
1
02/08/2021
02/08/2021
CBI ................
CBI ................
P–21–0085A ...
2
02/25/2021
CBI ................
P–21–0089 ......
3
02/25/2021
CBI ................
VerDate Sep<11>2014
17:45 Mar 22, 2021
Jkt 253001
PO 00000
(S) Additive for fluids used in oil drilling
operations.
(G) Battery additive ..................................
(S) Tackifying additive used in tire manufacture; Tackifying additive used in hot
melt adhesive applications.
(G) Additive in Household consumer
products.
(G) Additive in household consumer products.
(S) UV Curable resin ................................
(G) Chemical intermediate .......................
(G) Used as an additive in the manufacture of tires to improve performance.
(G) Used as an additive in the manufacture of tires to improve performance.
(G) Emulsifier ............................................
Frm 00030
Fmt 4703
Sfmt 4703
(S) 1,2,4,5-Benzenetetracarboxamide, N1,N2,N4,N5tetraoctyl-.
(S) 1,2,4,5-Benzenetetracarboxamide, N1,N2,N4,N5tetradodecyl-.
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated, polymers with 2-hydroxyethyl-terminated hydrogenated
polybutadiene, bis(2,5-dihydro-2,5-dioxo-1H-pyrrole-1hexanoate).
(G) fatty acids, reaction products with polyamine-polyacid
polymer and fatty acid.
(G) fatty acids, reaction products with polyamine-polyacid
polymer and fatty acid.
(G) fatty acids, reaction products with polyamine-polyacid
polymer and fatty acid.
(S) Methanesulfonic acid,1,1,1-trifluoro-, ytterbium(3+) salt
(3:1).
(G) Bisphenol A epichlorohydrin polymer with
alkylpolyalkene-polyarylene-hydroxypolyoxyalkyldiyl reaction products with alkylalkylidene-alkylalkylideneaminoalkyl-alkanepolyamine and alkylaminoalkanol.
(G) Sulfur based acid, compds. with modified bisphenol Aepichlorohydrin-polyalkylene polyol ether with bisphenol A
polymer-N-dialkylalkylidene-N-(dialkylalklyidene)aminoalkylalkanepolyamine-alkylaminoalkanol reaction products.
(G) Substituted-alkanoic acid, compds. with modified
bisphenol A-epichlorohydrin-polyalkylene polyol ether with
bisphenol A polymer-N-dialkylalkylidene-Ndialkylalkylideneaminoalkyl-alkanepolyaminealkylaminoalkanol reaction products.
(G) 1,2-alcandiol, 3-aryloxy, mono phosphate ester.
(S) 1,3-Butadiene, homopolymer, hydrogenated, 2(ethenyloxy)ethyl-terminated.
(G) Alkanoic acid, hydroxy-(hydroxyalkyl)-alkyl-, polymer with
alpha-[(hydroxyalkyl)alkyl]-omega-alkoxypoly(oxyalkanediyl), dialkyl carbonate, alkanediol,
alkylene[isocyanato-carbomonocycle] and
[oxybis(alkylene)]bis[alkyl-alkanediole] alkenoate, compd.
with dialkyalkanamine.
(G) Alcohols, C16–18 and C18-unsatd., reaction products
with subsstituted alkyloxirane and alkyl acid.
(S) Tinci_PMN3.
(G) Phenol, polymer with alkyl-(alkylalkylenyl)cyclohexene,
mixed dialkylcyclohexadienes, mixed alkyl(alkylalkylidene)cyclohexenes and 3,7,7trimethylbicyclo[4.1.0]hept-3-ene.
(G) Phenol, polymer with alkyl-(alkylalkylenyl)cyclohexene,
mixed dialkylcyclohexadienes, mixed alkyl(alkylalkylidene)cyclohexenes and 3,7,7trimethylbicyclo[4.1.0]hept-3-ene.
(S) 13-Oxabicyclo[10.1.0]trideca-4,8-diene, (4E)-.
(G) Alkanedioic acid, polymers with alkanoic aciddipentaerythritol reaction products, alkanedioc acid
dihydrazide, hydroxy-(hydroxyalkyl)-alkylalkanoic acid,
isocyanato-(isocyanatoalkyl)-alkyl substituted
carbomonocycle, dialkylalkanediol and polyakylene glycol(hydroxyalkyl)alkyl aklyl ether.
(S) 4-Pentenal, 5-cyclohexyl-2,4-dimethyl-, (4E)-.
(S) 1-Decen-4-yne.
(G) Alkenoic acid, reaction products with pentaerythritol,
polymers with diisocyanatoalkane and heteromonocyle
homopolymer esters with alkanoic acid-pentaerythritol reaction products.
(G) Carbopolycycle octa-alkene, halo.
(S) 1-Propanethiol, 3-(triethoxysilyl)-, reaction products with
polybutadiene.
(S) 1-Propanethiol, 3-(triethoxysilyl)-, reaction products with
polybutadiene.
(G) Lignin, modified, reaction products with alkylamine byproducts, hydrochlorides.
E:\FR\FM\23MRN1.SGM
23MRN1
15482
Federal Register / Vol. 86, No. 54 / Tuesday, March 23, 2021 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2021 TO 02/28/2021—Continued
Case No.
Version
P–21–0093 ......
2
Received
date
02/19/2021
Manufacturer
Use
Chemical substance
CBI ................
(G) Antiwear additive for lubricants ..........
(G) Phosphonic acid, dimethyl ester, reaction products with
alkyl-alkyl-alkanediol and alkanediol.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 02/01/2021 TO 02/28/2021
Received
date
Case No.
Commencement
date
If amendment,
type of
amendment
J–19–0022 ........
P–07–0004 .......
02/02/2021
02/09/2021
01/08/2021
02/06/2021
N
N
P–15–0017 .......
P–17–0360 .......
02/04/2021
02/01/2021
06/16/2017
02/01/2021
N
N
P–17–0364 .......
02/05/2021
01/11/2021
N
P–18–0175 .......
02/16/2021
02/14/2021
N
P–19–0081 .......
02/11/2021
02/07/2021
N
P–19–0147 .......
P–21–0012 .......
02/02/2021
02/16/2021
01/29/2021
02/05/2021
N
N
Chemical substance
(G) Saccharomyces cerevisiae, strain cbi.
(G) Fatty acids, c16-18 and c18 unsaturated, esters with mixed diols
& triols.
(G) Iron alkylenediaminehydroxy sulfophonic acid.
(S) 2-Propanol, 1-amino-,compd. with.alpha.-sulfo-.omega.(octyloxy)poly(oxy-1,2-ethanediyl)(1:1).
(S) 2-propanol, 1-amino-,compd. with .alpha.-sulfo-.omega.(decyloxy)poly(oxy-1,2-ethanediyl)(1:1).
(G) Dicyloalkyl-alkane-di-isocyanate homopolymer, alkyl alcohol and
polyalkyl glycol mono-alkyl-ether-blocked.
(S) Formaldehyde, polymer with 4-(1,1-dimethylethyl)phenol and
phenol, bu ether.
(G) 2-propenoic acid, ethyl ester, reaction products with o,obis(polyalkylalkyl) hydrogen phosphorodithioate, o,o-dialkyl hydrogen phosphorodithioate and propylene oxide.
(G) Alkoxylated buty alkyl ester.
(G) Multialkylbicycloalkenyl substituted propanenitrile.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 02/01/2021 TO 02/28/2021
Case No.
P–16–0543 ..
Received
date
02/23/2021
Type of test information
Chemical substance
Exposure Monitoring Report January 2021 ..................
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
(G) Halogenophosphoric acid metal salt.
Dated: March 17, 2021.
Pamela Myrick,
Director, Project Management and Operations
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2021–05927 Filed 3–22–21; 8:45 am]
BILLING CODE 6560–50–P
FEDERAL COMMUNICATIONS
COMMISSION
[FR ID 17582]
Privacy Act of 1974; System of
Records
Federal Communications
Commission.
ACTION: Notice of a new system of
records.
AGENCY:
Authority: 15 U.S.C. 2601 et seq.
The Federal Communications
Commission (FCC or Commission or
Agency) proposes to add a new system
SUMMARY:
VerDate Sep<11>2014
17:45 Mar 22, 2021
Jkt 253001
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
E:\FR\FM\23MRN1.SGM
23MRN1
Agencies
[Federal Register Volume 86, Number 54 (Tuesday, March 23, 2021)]
[Notices]
[Pages 15478-15482]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-05927]
[[Page 15478]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2021-0068; FRL-10021-62]
Certain New Chemicals; Receipt and Status Information for
February 2021
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 02/01/
2021 to 02/28/2021.
DATES: Comments identified by the specific case number provided in this
document must be received on or before April 22, 2021.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2021-0068 and the specific case number for the
chemical substance related to your comment, by using the Federal
eRulemaking Portal at https://www.regulations.gov. Follow the online
instructions for submitting comments. Do not submit electronically any
information you consider to be Confidential Business Information (CBI)
or other information whose disclosure is restricted by statute.
Due to the public health concerns related to COVID-19, the EPA
Docket Center (EPA/DC) and Reading Room is closed to visitors with
limited exceptions. The staff continues to provide remote customer
service via email, phone, and webform. For the latest status
information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management
and Operations Division (7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
What action is the Agency taking?
This document provides the receipt and status reports for the
period from 02/01/2021 to 02/28/2021. The Agency is providing notice of
receipt of PMNs, SNUNs, and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a
[[Page 15479]]
copy of the comment that does not contain the information claimed as
CBI must be submitted for inclusion in the public docket. Information
so marked will not be disclosed except in accordance with procedures
set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 02/01/2021 to 02/28/2021
--------------------------------------------------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
J-21-0005............................. 3 01/14/2021 CBI...................... (G) Chemical production.... (G) Modified Saccharomyces
cerevisiae enhanced ethanol
yield.
J-21-0006............................. 3 01/14/2021 CBI...................... (G) Chemical production.... (G) Modified Saccharomyces
cerevisiae enhanced ethanol
yield.
P-18-0128A............................ 5 02/22/2021 CBI...................... (G) Surface modifier....... (S) Inulin, 2-hydroxy-3-
(trimethylammonio)propyl ether,
chloride.
P-18-0135A............................ 5 02/03/2021 CBI...................... (G) Ingredient for (S) 1,2-Decanediol.
household products.
P-18-0256A............................ 5 02/10/2021 CBI...................... (G) Chemical Intermediate.. (S) Undecanol, branched.
P-18-0273A............................ 7 02/25/2021 CBI...................... (G) Used in polymer (S) 1,4-Cyclohexanedicarboxylic
manufacturing. acid, 1,4-bis(2-ethylhexyl)
ester.
P-18-0289A............................ 9 02/15/2021 Guard Products........... (G) Gas scrubbing, landfill (G) 2-
deoderizing. (2(methylcaboxymonocyclic)amino)e
thoxy)-alcohol.
P-18-0289A............................ 10 02/15/2021 Guard Products........... (G) Gas scrubbing, landfill (G) 2-
deoderizing. (2(methylcaboxymonocyclic)amino)e
thoxy)-alcohol.
P-18-0290A............................ 9 02/15/2021 Guard Products........... (G) Gas scrubbing, (G) Carbomonocylic-oxazolidine.
wastewater deodorizing.
P-18-0290A............................ 10 02/15/2021 Guard Products........... (G) Gas scrubbing, (G) Carbomonocylic-oxazolidine.
wastewater deodorizing.
P-18-0293A............................ 8 02/02/2021 Sirrus, Inc.............. (S) Intermediate: Monomer (S) Propanedioic acid, 2-methylene-
used as a chemical, in the , 1,3-dihexyl ester.
manufacture of polymers,
Adhesives: Monomer used in
the manufacture
(formulation) of
adhesives, Coatings:
Monomer used in the
manufacture of industrial
coatings.
P-18-0293A............................ 9 02/02/2021 Sirrus, Inc.............. (S) Intermediate: Monomer (S) Propanedioic acid, 2-methylene-
used as a chemical, in the , 1,3-dihexyl ester.
manufacture of polymers,
Adhesives: Monomer used in
the manufacture
(formulation) of
adhesives, Coatings:
Monomer used in the
manufacture of industrial
coatings.
P-18-0294A............................ 8 02/02/2021 Sirrus, Inc.............. (S) Intermediate: Monomer (S) Propanedioic acid, 2-methylene-
for use in emulsion , 1,3-dicyclohexyl ester.
polymers, Adhesives:
Monomer for use in
formulated industrial
adhesives, Coatings:
Monomer for use in
formulated industrial
coatings.
[[Page 15480]]
P-18-0294A............................ 9 02/02/2021 Sirrus, Inc.............. (S) Intermediate: Monomer (S) Propanedioic acid, 2-methylene-
used as a chemical, in the , 1,3-dicyclohexyl ester.
manufacture of polymers,
Adhesives: Monomer used in
the manufacture
(formulation) of
adhesives, Coatings:
Monomer used in the
manufacture of industrial
coatings.
P-18-0301A............................ 3 02/02/2021 CBI...................... (G) Coating component...... (G) Alkanedioic acid, polymer with
cycloalkyl dimethanol, alkyl and
cycloalkyl diisocyanates,
dimethyl-alkanediol,
dihydroxyalkanoic acid
methylenebis[isocyanatocyclohexan
e, hydroxyethyl acrylate- and
polyalkyl glycol monoalkyl ether
blocked.
P-18-0383A............................ 5 02/02/2021 CBI...................... (G) Coatings and inks for (G) Dialkyl-alkanediamine, polymer
commercial use. with [(oxo-alkenyl)oxy]poly(oxy-
alkanediyl)ether with
bis(hydroxyalkyl)-alkanediol.
P-19-0122A............................ 4 02/10/2021 CBI...................... (G) Reactant monomer in a (G) 2-propenoic acid, 2-
polymer for industrial use. (hydrogenated animal-based
nitrogen-substituted) ethyl
ester.
P-19-0160A............................ 3 02/09/2021 CBI...................... (S) Component of a UV (G) Alkanesulfonic acid, 2-[(2-
curable printing ink. aminoethyl)heteroatom-
substituted]-, sodium salt (1:1),
polymer with alpha-[2,2-
bis(hydroxymethyl)butyl]-omega-
methoxypoly(oxy-1,2-ethanediyl)
and 1,1'-methylenebis[4-
isocyanatocyclohexane], acrylic
acid-dipenthaerythritol reaction
products- and polypropylene
glycol ether with pentaerythritol
(4:1) triacrylate-blocked.
P-20-0071A............................ 9 02/18/2021 CBI...................... (G) Colorant............... (G) Salt of 2-Naphthalenesulfonic
acid, hydroxy [(methoxy-methyl-4-
sulfophenyl)diazenyl].
P-20-0083A............................ 3 02/10/2021 CBI...................... (G) Reactant monomer in a (G) 2-propenoic acid, nitrogen-
polymer for industrial use. substituted alkyl, N-C16-18-acyl
derivs.
P-20-0097A............................ 5 02/19/2021 Nelson Brothers, LLC..... (S) The PMN substance will (G) Butanedioic acid,
be used as an emulsifier monopolyisobutylene derivs.,
for applications in mixed dihydroxyalkyl and
explosives. hydroxyalkoxyalkyl diesters.
P-20-0110A............................ 2 02/02/2021 Clariant Corporation..... (S) Base oil additive for (G) Oxirane, 2-methyl-, polymer
lubricants and greases. with oxirane, (alkoxyalkoxy)alkyl
alkyl ether.
P-20-0124A............................ 2 02/05/2021 CBI...................... (G) Additive in Household (S) 5-octen-4-ol, 3,5-dimethyl-,
consumer products. (5E)-.
P-20-0126A............................ 2 02/05/2021 CBI...................... (G) Additive in household (S) 4-Decenal, 5,9-dimethyl-.
consumer products.
P-20-0132A............................ 2 02/08/2021 Designer Molecules, Inc.. (G) Adhesive component..... (S) 1H-Pyrrole-2,5-dione, 3-methyl-
, 1,1'-C36-alkylenebis-.
P-20-0148A............................ 3 01/29/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0148A............................ 4 02/08/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0148A............................ 5 02/10/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0149A............................ 3 01/29/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0149A............................ 4 02/08/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0149A............................ 5 02/10/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0150A............................ 3 01/29/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0150A............................ 4 02/08/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0150A............................ 5 02/10/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0151A............................ 3 01/29/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0151A............................ 4 02/08/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0151A............................ 5 02/10/2021 Solugen, Inc............. (G) Additive for consumer, (G) Hydroxyalkanoic acid, salt,
industrial, and commercial oxidized.
uses.
P-20-0167A............................ 4 02/11/2021 W.R. Grace & Co.--Conn... (G) Catalyst............... (G) Phenylene, alkyl and
polycarbomonocycle substituted,
1,2-dicarboxylate.
P-20-0168A............................ 6 02/10/2021 CBI...................... (S) Lubricating additives (G) Polyolefin polyamine
for engine oils, succinimide, carbopolycycle
transmission and hydraulic alkoxylated.
fluid and gear oil
applications.
P-20-0183A............................ 3 02/10/2021 CBI...................... (G) Intermediate........... (G) Aryl ether epoxide,
homopolymer, ether with
alkanolamine.
P-21-0015A............................ 2 01/28/2021 Designer Molecules, Inc.. (S) As a raw material in a (S) Amines, C36-alkylenedi-,
Temporary Bonding Adhesive polymers with 5,5'-[(1-
formulation. methylethylidene)bis(4,1-
phenyleneoxy)]bis[1,3-
isobenzofurandione] and 4,4'-
[2,2,2-trifluoro-1-
(trifluoromethyl)ethylidene]bis[2-
aminophenol].
P-21-0036............................. 2 02/04/2021 CBI...................... (G) Additive in Household (S) 5-Hexen-2-one, 1-
consumer products. bicyclo[2.2.1]hept-2-yl-.
P-21-0039A............................ 2 02/03/2021 Sinova Specialties, Inc.. (S) Part of a series of (S) 1,2,4,5-
chemicals used as Benzenetetracarboxamide, N1, N2,
viscosity modifiers in N4, N5-tetrahexyl-.
commercial and consumer
engine oil.
[[Page 15481]]
P-21-0040A............................ 2 02/03/2021 Sinova Specialties, Inc.. (S) Part of a series of (S) 1,2,4,5-
chemicals used as Benzenetetracarboxamide,
viscosity modifiers in N1,N2,N4,N5-tetraoctyl-.
commercial and consumer
engine oil.
P-21-0041A............................ 2 02/03/2021 Sinova Specialties, Inc.. (S) Part of a series of (S) 1,2,4,5-
chemicals used as Benzenetetracarboxamide,
viscosity modifiers in N1,N2,N4,N5-tetradodecyl-.
commercial and consumer
engine oil.
P-21-0051A............................ 3 02/15/2021 Designer Molecules, Inc.. (G) Resin component of an (S) Fatty Acids, C18-unsatd.,
adhesive formulation. dimers, hydrogenated, polymers
with 2-hydroxyethyl-terminated
hydrogenated polybutadiene,
bis(2,5-dihydro-2,5-dioxo-1H-
pyrrole-1-hexanoate).
P-21-0055............................. 2 02/01/2021 Hexion, Inc.............. (G) adhesive used for (G) fatty acids, reaction products
coating formulation. with polyamine-polyacid polymer
and fatty acid.
P-21-0055A............................ 3 02/04/2021 Hexion, Inc.............. (G) adhesive used for (G) fatty acids, reaction products
coating formulation. with polyamine-polyacid polymer
and fatty acid.
P-21-0055A............................ 4 02/23/2021 Hexion, Inc.............. (G) adhesive used for (G) fatty acids, reaction products
coating formulation. with polyamine-polyacid polymer
and fatty acid.
P-21-0059............................. 2 02/17/2021 CBI...................... (G) Stabilizer............. (S) Methanesulfonic acid,1,1,1-
trifluoro-, ytterbium(3+) salt
(3:1).
P-21-0060A............................ 3 02/03/2021 CBI...................... (G) Isolated intermediate.. (G) Bisphenol A epichlorohydrin
polymer with alkylpolyalkene-
polyarylene-
hydroxypolyoxyalkyldiyl reaction
products with alkylalkylidene-
alkylalkylidene-aminoalkyl-
alkanepolyamine and
alkylaminoalkanol.
P-21-0061A............................ 3 02/03/2021 CBI...................... (G) Component in coatings.. (G) Sulfur based acid, compds.
with modified bisphenol A-
epichlorohydrin-polyalkylene
polyol ether with bisphenol A
polymer-N-dialkylalkylidene-N-
(dialkylalklyidene)aminoalkyl-
alkanepolyamine-alkylaminoalkanol
reaction products.
P-21-0062A............................ 3 02/03/2021 CBI...................... (G) Component in coatings.. (G) Substituted-alkanoic acid,
compds. with modified bisphenol A-
epichlorohydrin-polyalkylene
polyol ether with bisphenol A
polymer-N-dialkylalkylidene-N-
dialkylalkylideneaminoalkyl-
alkanepolyamine-alkylaminoalkanol
reaction products.
P-21-0066............................. 4 02/08/2021 L & L Products........... (S) Blended or stand alone, (G) 1,2-alcandiol, 3-aryloxy, mono
epoxy curative (hardener) phosphate ester.
and foaming agent when
blended with certain
ingredients.
P-21-0074A............................ 2 02/15/2021 Designer Molecules, Inc.. (G) Resin component of an (S) 1,3-Butadiene, homopolymer,
adhesive formulation. hydrogenated, 2-(ethenyloxy)ethyl-
terminated.
P-21-0075A............................ 2 02/04/2021 Allnex USA, Inc.......... (S) Coating Resin.......... (G) Alkanoic acid, hydroxy-
(hydroxyalkyl)-alkyl-, polymer
with alpha-[(hydroxyalkyl)alkyl]-
omega-alkoxypoly(oxy-alkanediyl),
dialkyl carbonate, alkanediol,
alkylene[isocyanato-
carbomonocycle] and
[oxybis(alkylene)]bis[alkyl-
alkanediole] alkenoate, compd.
with dialkyalkanamine.
P-21-0076............................. 2 02/09/2021 CBI...................... (S) Additive for fluids (G) Alcohols, C16-18 and C18-
used in oil drilling unsatd., reaction products with
operations. subsstituted alkyloxirane and
alkyl acid.
P-21-0077............................. 1 02/02/2021 Rahn USA Corp............ (G) Battery additive....... (S) Tinci_PMN3.
P-21-0078............................. 1 02/02/2021 Pinova, Inc.............. (S) Tackifying additive (G) Phenol, polymer with alkyl-
used in tire manufacture; (alkylalkylenyl)cyclohexene,
Tackifying additive used mixed dialkylcyclohexadienes,
in hot melt adhesive mixed alkyl-
applications. (alkylalkylidene)cyclohexenes and
3,7,7-trimethylbicyclo[4.1.0]hept-
3-ene.
P-21-0078A............................ 2 02/23/2021 Pinova, Inc.............. (S) Tackifying additive (G) Phenol, polymer with alkyl-
used in tire manufacture; (alkylalkylenyl)cyclohexene,
Tackifying additive used mixed dialkylcyclohexadienes,
in hot melt adhesive mixed alkyl-
applications. (alkylalkylidene)cyclohexenes and
3,7,7-trimethylbicyclo[4.1.0]hept-
3-ene.
P-21-0079............................. 1 02/04/2021 CBI...................... (G) Additive in Household (S) 13-Oxabicyclo[10.1.0]trideca-
consumer products. 4,8-diene, (4E)-.
P-21-0080............................. 2 02/10/2021 Allnex USA, Inc.......... (S) Binder for UV Curable (G) Alkanedioic acid, polymers
Coating Resin. with alkanoic acid-
dipentaerythritol reaction
products, alkanedioc acid
dihydrazide, hydroxy-
(hydroxyalkyl)-alkylalkanoic
acid, isocyanato-
(isocyanatoalkyl)-alkyl
substituted carbomonocycle,
dialkylalkanediol and polyakylene
glycol(hydroxyalkyl)alkyl aklyl
ether.
P-21-0081............................. 2 02/11/2021 CBI...................... (G) Additive in Household (S) 4-Pentenal, 5-cyclohexyl-2,4-
consumer products. dimethyl-, (4E)-.
P-21-0082............................. 1 02/05/2021 CBI...................... (G) Additive in household (S) 1-Decen-4-yne.
consumer products.
P-21-0083............................. 2 02/10/2021 Allnex, USA Inc.......... (S) UV Curable resin....... (G) Alkenoic acid, reaction
products with pentaerythritol,
polymers with diisocyanatoalkane
and heteromonocyle homopolymer
esters with alkanoic acid-
pentaerythritol reaction
products.
P-21-0084............................. 1 02/08/2021 CBI...................... (G) Chemical intermediate.. (G) Carbopolycycle octa-alkene,
halo.
P-21-0085............................. 1 02/08/2021 CBI...................... (G) Used as an additive in (S) 1-Propanethiol, 3-
the manufacture of tires (triethoxysilyl)-, reaction
to improve performance. products with polybutadiene.
P-21-0085A............................ 2 02/25/2021 CBI...................... (G) Used as an additive in (S) 1-Propanethiol, 3-
the manufacture of tires (triethoxysilyl)-, reaction
to improve performance. products with polybutadiene.
P-21-0089............................. 3 02/25/2021 CBI...................... (G) Emulsifier............. (G) Lignin, modified, reaction
products with alkylamine by-
products, hydrochlorides.
[[Page 15482]]
P-21-0093............................. 2 02/19/2021 CBI...................... (G) Antiwear additive for (G) Phosphonic acid, dimethyl
lubricants. ester, reaction products with
alkyl-alkyl-alkanediol and
alkanediol.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 02/01/2021 to 02/28/2021
----------------------------------------------------------------------------------------------------------------
If amendment, type of
Case No. Received date Commencement date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0022............ 02/02/2021........... 01/08/2021........... N.................... (G) Saccharomyces
cerevisiae, strain
cbi.
P-07-0004............ 02/09/2021........... 02/06/2021........... N.................... (G) Fatty acids, c16-
18 and c18
unsaturated, esters
with mixed diols &
triols.
P-15-0017............ 02/04/2021........... 06/16/2017........... N.................... (G) Iron
alkylenediaminehydr
oxy sulfophonic
acid.
P-17-0360............ 02/01/2021........... 02/01/2021........... N.................... (S) 2-Propanol, 1-
amino-,compd.
with.alpha.-sulfo-
.omega.-
(octyloxy)poly(oxy-
1,2-
ethanediyl)(1:1).
(S) 2-propanol, 1-
amino-,compd. with
.alpha.-sulfo-
.omega.-
(decyloxy)poly(oxy-
1,2-
ethanediyl)(1:1).
P-17-0364............ 02/05/2021........... 01/11/2021........... N.................... (G) Dicyloalkyl-
alkane-di-
isocyanate
homopolymer, alkyl
alcohol and
polyalkyl glycol
mono-alkyl-ether-
blocked.
P-18-0175............ 02/16/2021........... 02/14/2021........... N.................... (S) Formaldehyde,
polymer with 4-(1,1-
dimethylethyl)pheno
l and phenol, bu
ether.
P-19-0081............ 02/11/2021........... 02/07/2021........... N.................... (G) 2-propenoic
acid, ethyl ester,
reaction products
with o,o-
bis(polyalkylalkyl)
hydrogen
phosphorodithioate,
o,o-dialkyl
hydrogen
phosphorodithioate
and propylene
oxide.
P-19-0147............ 02/02/2021........... 01/29/2021........... N.................... (G) Alkoxylated buty
alkyl ester.
P-21-0012............ 02/16/2021........... 02/05/2021........... N.................... (G)
Multialkylbicycloal
kenyl substituted
propanenitrile.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 02/01/2021 to 02/28/2021
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0543........................... 02/23/2021 Exposure Monitoring Report (G) Halogenophosphoric acid
January 2021. metal salt.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 17, 2021.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2021-05927 Filed 3-22-21; 8:45 am]
BILLING CODE 6560-50-P