Foreign-Trade Zone (FTZ) 72-Indianapolis, Indiana; Notification of Proposed Production Activity; XPO Logistics (Wearable Electronic Communication/Data Device Kitting); Clayton, Indiana, 11921 [2021-04103]

Download as PDF Federal Register / Vol. 86, No. 38 / Monday, March 1, 2021 / Notices DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–64–2020] Foreign-Trade Zone (FTZ) 106— Oklahoma City, Oklahoma; Authorization of Production Activity; Miraclon Corporation (Flexographic/ Aluminum Printing Plates and Direct/ Thermo Imaging Layer Film); Weatherford, Oklahoma On October 27, 2020, Miraclon Corporation submitted a notification of proposed production activity to the FTZ Board for its facility within Subzone 106F, in Weatherford, Oklahoma. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (85 FR 70580, November 5, 2020). On February 24, 2021, the applicant was notified of the FTZ Board’s decision that no further review of the activity is warranted at this time. The production activity described in the notification was authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: February 24, 2021. Andrew McGilvray, Executive Secretary. [FR Doc. 2021–04102 Filed 2–26–21; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–13–2021] Foreign-Trade Zone (FTZ) 72— Indianapolis, Indiana; Notification of Proposed Production Activity; XPO Logistics (Wearable Electronic Communication/Data Device Kitting); Clayton, Indiana XPO Logistics (XPO) submitted a notification of proposed production activity to the FTZ Board for its facility in Clayton, Indiana. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on February 18, 2021. The XPO facility is located within FTZ 72. The facility is used for the kitting of wearable electronic communication/data devices with watch bands of various materials. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished product described VerDate Sep<11>2014 18:48 Feb 26, 2021 Jkt 253001 in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt XPO from customs duty payments on the foreign-status components used in export production. On its domestic sales, for the foreignstatus materials/components noted below, XPO would be able to choose the duty rate during customs entry procedures that applies to wearable electronic communication/data devices (duty-free). XPO would be able to avoid duty on foreign-status components which become scrap/waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include wearable electronic communication/data devices and watch bands of leather, steel, silicon and woven nylon textile material (duty rate ranges from duty-free to 11.2%). The request indicates that certain materials/components are subject to duties under Section 301 of the Trade Act of 1974 (Section 301), depending on the country of origin. The applicable Section 301 decisions require subject merchandise to be admitted to FTZs in privileged foreign status (19 CFR 146.41). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is April 12, 2021. A copy of the notification will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Diane Finver at Diane.Finver@trade.gov. Dated: February 24, 2021. Andrew McGilvray, Executive Secretary. [FR Doc. 2021–04103 Filed 2–26–21; 8:45 am] BILLING CODE 3510–DS–P Foreign-Trade Zones Board Foreign-Trade Zone (FTZ) 5—Seattle, Washington; Notification of Proposed Production Activity; Juno Therapeutics, Inc. (Biopharmaceuticals); Bothell, Washington Juno Therapeutics, Inc. (Juno) submitted a notification of proposed Fmt 4703 Dated: February 22, 2021. Andrew McGilvray, Executive Secretary. [FR Doc. 2021–04104 Filed 2–26–21; 8:45 am] Sfmt 4703 DEPARTMENT OF COMMERCE International Trade Administration [B–12–2021] Frm 00003 production activity to the FTZ Board for its facility in Bothell, Washington. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on February 12, 2021. A separate application has been submitted for FTZ designation at the company’s facility under FTZ 5. The facility is used for the production of cell therapy products. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status material and specific finished product described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Juno from customs duty payments on the foreign-status material used in export production. On its domestic sales, for the foreign-status material noted below, Juno would be able to choose the duty rate during customs entry procedures that applies to cell therapy products (duty-free). Juno would be able to avoid duty on foreignstatus material which becomes scrap/ waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The material sourced from abroad is human primary cells (‘‘T-cells’’) (dutyfree). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is April 12, 2021. A copy of the notification will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Diane Finver at Diane.Finver@trade.gov or (202) 482–1367. BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE PO 00000 11921 Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review Enforcement and Compliance, International Trade Administration, Department of Commerce. FOR FURTHER INFORMATION CONTACT: Brenda E. Brown, Office of AD/CVD AGENCY: E:\FR\FM\01MRN1.SGM 01MRN1

Agencies

[Federal Register Volume 86, Number 38 (Monday, March 1, 2021)]
[Notices]
[Page 11921]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-04103]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-13-2021]


Foreign-Trade Zone (FTZ) 72--Indianapolis, Indiana; Notification 
of Proposed Production Activity; XPO Logistics (Wearable Electronic 
Communication/Data Device Kitting); Clayton, Indiana

    XPO Logistics (XPO) submitted a notification of proposed production 
activity to the FTZ Board for its facility in Clayton, Indiana. The 
notification conforming to the requirements of the regulations of the 
FTZ Board (15 CFR 400.22) was received on February 18, 2021.
    The XPO facility is located within FTZ 72. The facility is used for 
the kitting of wearable electronic communication/data devices with 
watch bands of various materials. Pursuant to 15 CFR 400.14(b), FTZ 
activity would be limited to the specific foreign-status materials and 
components and specific finished product described in the submitted 
notification (as described below) and subsequently authorized by the 
FTZ Board.
    Production under FTZ procedures could exempt XPO from customs duty 
payments on the foreign-status components used in export production. On 
its domestic sales, for the foreign-status materials/components noted 
below, XPO would be able to choose the duty rate during customs entry 
procedures that applies to wearable electronic communication/data 
devices (duty-free). XPO would be able to avoid duty on foreign-status 
components which become scrap/waste. Customs duties also could possibly 
be deferred or reduced on foreign-status production equipment.
    The components and materials sourced from abroad include wearable 
electronic communication/data devices and watch bands of leather, 
steel, silicon and woven nylon textile material (duty rate ranges from 
duty-free to 11.2%). The request indicates that certain materials/
components are subject to duties under Section 301 of the Trade Act of 
1974 (Section 301), depending on the country of origin. The applicable 
Section 301 decisions require subject merchandise to be admitted to 
FTZs in privileged foreign status (19 CFR 146.41).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary and sent to: 
[email protected]. The closing period for their receipt is April 12, 2021.
    A copy of the notification will be available for public inspection 
in the ``Reading Room'' section of the Board's website, which is 
accessible via www.trade.gov/ftz.
    For further information, contact Diane Finver at 
[email protected].

    Dated: February 24, 2021.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2021-04103 Filed 2-26-21; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.