Airworthiness Directives; Bombardier, Inc., Airplanes, 11163-11165 [2021-03587]

Download as PDF Federal Register / Vol. 86, No. 35 / Wednesday, February 24, 2021 / Proposed Rules in paragraphs (l)(5)(i), (ii), and (iii) of this AD are acceptable methods of compliance for the repaired area where the inspections of the baseline structure cannot be accomplished. (i) The repair was approved under both 14 CFR 25.571 and 14 CFR 26.43(d) by The Boeing Company ODA that has been authorized by the Manager, Seattle ACO Branch, FAA, to make those findings. (ii) The repair approval provides an inspection program (inspection threshold, method, and repetitive interval). (iii) Operators revised their maintenance or inspection program, as applicable, to include the inspection program (inspection threshold, method, and repetitive interval) for the repair. (m) Related Information (1) For more information about this AD, contact Wayne Lockett, Aerospace Engineer, Airframe Section, FAA, Seattle ACO Branch, 2200 South 216th St., Des Moines, WA 98198; phone and fax: 206–231–3524; email: wayne.lockett@faa.gov. (2) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; internet https:// www.myboeingfleet.com. You may view this referenced service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. Issued on January 20, 2021. Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2021–03595 Filed 2–23–21; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2021–0097; Project Identifier MCAI–2020–01334–T] RIN 2120–AA64 Airworthiness Directives; Bombardier, Inc., Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). khammond on DSKJM1Z7X2PROD with PROPOSALS AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD– 100–1A10 airplanes. This proposed AD was prompted by reports of DC motor pump (DCMP) failures during production flight tests. This proposed AD would require installing a SUMMARY: VerDate Sep<11>2014 16:41 Feb 23, 2021 Jkt 253001 redesigned DCMP electric motor assembly. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by April 12, 2021. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this NPRM, contact Bombardier, Inc., 200 Coˆte-Vertu Road West, Dorval, Que´bec H4S 2A3, Canada; North America toll-free telephone 1–866–538– 1247 or direct-dial telephone 1–514– 855–2999; email ac.yul@ aero.bombardier.com; internet https:// www.bombardier.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2021– 0097; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516–228–7367; fax: 516– 794–5531; email: 9-avs-nyaco-cos@ faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. PO 00000 Frm 00008 Fmt 4702 Sfmt 4702 11163 FAA–2021–0097; Project Identifier MCAI–2020–01334–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend the proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https:// www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this proposed AD. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Steven Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516–228–7367; fax: 516–794–5531; email: 9-avs-nyaco-cos@ faa.gov. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. Discussion Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued TCCA AD CF– 2020–31, dated September 23, 2020 (TCCA AD CF–2020–31) (referred to after this as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Bombardier, Inc., Model BD– 100–1A10 airplanes. You may examine the MCAI in the AD docket on the internet at https://www.regulations.gov E:\FR\FM\24FEP1.SGM 24FEP1 11164 Federal Register / Vol. 86, No. 35 / Wednesday, February 24, 2021 / Proposed Rules by searching for and locating Docket No. FAA–2021–0097. This proposed AD was prompted by reports of DCMP failures during production flight tests. These failures caused the electrical system generators to disconnect due to excessive induced voltage in the bus, caused by the DCMP overheating at high altitudes. The FAA is proposing this AD to address failures of the DCMP and electrical system generators, which could lead to the loss of normal electrical power on the airplane. See the MCAI for additional background information. Related Service Information Under 1 CFR Part 51 Bombardier has issued Service Bulletin 100–29–18, Revision 03, dated December 18, 2014. This service information describes procedures for installing the redesigned DCMP electric motor assembly, having part number (P/ N) 945202–3 (including a wiring modification and a structural modification). This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. FAA’s Determination This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to the FAA’s bilateral agreement with the State of Design Authority, the FAA has been notified of the unsafe condition described in the MCAI and service information referenced above. The FAA is proposing this AD because the FAA evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop on other products of the same type design. Proposed Requirements of This NPRM This proposed AD would require accomplishing the actions specified in the service information described previously. Costs of Compliance The FAA estimates that this proposed AD affects 239 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS FOR REQUIRED ACTIONS Labor cost Parts cost Cost per product Cost on U.S. operators 68 work-hours × $85 per hour = $5,780 ..................................................................................... $18,964 $24,744 $5,913,816 Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. khammond on DSKJM1Z7X2PROD with PROPOSALS Regulatory Findings 16:41 Feb 23, 2021 (b) Affected ADs List of Subjects in 14 CFR Part 39 Air Transport Association (ATA) of America Code 29, Hydraulic power. Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: VerDate Sep<11>2014 (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Would not affect intrastate aviation in Alaska, and (3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. Jkt 253001 § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: ■ Bombardier, Inc.: Docket No. FAA–2021– 0097; Project Identifier MCAI–2020– 01334–T. (a) Comments Due Date The FAA must receive comments on this airworthiness directive (AD) action by April 12, 2021. PO 00000 Frm 00009 Fmt 4702 Sfmt 4702 None. (c) Applicability This AD applies to Bombardier, Inc., Model BD–100–1A10 airplanes, certificated in any category, serial numbers 20003 through 20406 inclusive. (d) Subject (e) Reason This AD was prompted by reports of DC motor pump (DCMP) failures during production flight tests. These failures caused the electrical system generators to disconnect due to excessive induced voltage in the bus, caused by the DCMP overheating at high altitudes. The FAA is issuing this AD to address failures of the DCMP and electrical system generators, which could lead to the loss of normal electrical power on the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Required Actions Within 6 months after the effective date of this AD: Install the redesigned DCMP electric motor assembly, having part number (P/N) 945202–3, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 100–29–18, Revision 03, dated December 18, 2014. (h) Parts Installation Prohibition After accomplishing the installation required by paragraph (g) of this AD, no E:\FR\FM\24FEP1.SGM 24FEP1 Federal Register / Vol. 86, No. 35 / Wednesday, February 24, 2021 / Proposed Rules person may install a DCMP having P/N MB74F–9/–7 on any airplane. (i) Credit for Previous Actions This paragraph provides credit for actions required by paragraph (g) of this AD, if those actions were performed before the effective date of this AD using Bombardier Service Bulletin 100–29–18, dated July 2, 2013; Bombardier Service Bulletin 100–29–18, Revision 01, dated January 21, 2014; or Bombardier Service Bulletin 100–29–18, Revision 02, dated July 18, 2014. khammond on DSKJM1Z7X2PROD with PROPOSALS (j) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the certification office, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7300; fax 516–794–5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, New York ACO Branch, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.’s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (k) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) TCCA AD CF–2020–31, dated September 23, 2020, for related information. This MCAI may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2021–0097. (2) For more information about this AD, contact Steven Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: 516–228–7367; fax: 516–794–5531; email: 9-avs-nyaco-cos@ faa.gov. (3) For service information identified in this AD, contact Bombardier, Inc., 200 CoˆteVertu Road West, Dorval, Que´bec H4S 2A3, Canada; North America toll-free telephone 1– 866–538–1247 or direct-dial telephone 1– 514–855–2999; email ac.yul@ aero.bombardier.com; internet https:// www.bombardier.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. VerDate Sep<11>2014 16:41 Feb 23, 2021 Jkt 253001 Issued on February 11, 2021. Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2021–03587 Filed 2–23–21; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2021–0098; Project Identifier MCAI–2020–01121–T] RIN 2120–AA64 Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to supersede Airworthiness Directive (AD) 2019–22–07, which applies to all MHI RJ Aviation ULC Model CL–600–2B19 (Regional Jet Series 100 & 440) airplanes, Model CL–600–2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL–600–2D15 (Regional Jet Series 705) airplanes, Model CL–600–2D24 (Regional Jet Series 900) airplanes, and Model CL– 600–2E25 (Regional Jet Series 1000) airplanes. AD 2019–22–07 requires revising the existing airplane flight manual (AFM) to include a limitation and an abnormal operating procedure for the Automatic Flight Control System (AFCS). Since the FAA issued AD 2019– 22–07, it was found that the limitation and abnormal operating procedure did not include reference to a certain mode. This proposed AD would require revising the existing AFM and adding airplanes to the applicability. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by April 12, 2021. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. SUMMARY: PO 00000 Frm 00010 Fmt 4702 Sfmt 4702 11165 • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For MHI RJ Aviation ULC service information identified in this NPRM, contact MHI RJ Aviation ULC, 12655 Henri-Fabre Blvd., Mirabel, Que´bec J7N 1E1 Canada; Widebody Customer Response Center North America toll-free telephone +1–844–272–2720 or directdial telephone +1–514–855–8500; fax +1–514–855–8501; email thd.crj@ mhirj.com; internet https://mhirj.com. You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231– 3195. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2021– 0098; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7367; email 9-avs-nyaco-cos@ faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2021–0098; Project Identifier MCAI–2020–01121–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend the proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https:// www.regulations.gov, including any personal information you provide. The E:\FR\FM\24FEP1.SGM 24FEP1

Agencies

[Federal Register Volume 86, Number 35 (Wednesday, February 24, 2021)]
[Proposed Rules]
[Pages 11163-11165]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2021-03587]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2021-0097; Project Identifier MCAI-2020-01334-T]
RIN 2120-AA64


Airworthiness Directives; Bombardier, Inc., Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This 
proposed AD was prompted by reports of DC motor pump (DCMP) failures 
during production flight tests. This proposed AD would require 
installing a redesigned DCMP electric motor assembly. The FAA is 
proposing this AD to address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by April 12, 
2021.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For service information identified in this NPRM, contact 
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval, Qu[eacute]bec 
H4S 2A3, Canada; North America toll-free telephone 1-866-538-1247 or 
direct-dial telephone 1-514-855-2999; email [email protected]; 
internet https://www.bombardier.com. You may view this service 
information at the FAA, Airworthiness Products Section, Operational 
Safety Branch, 2200 South 216th St., Des Moines, WA. For information on 
the availability of this material at the FAA, call 206-231-3195.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2021-
0097; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this NPRM, any comments received, and other information. The street 
address for Docket Operations is listed above.

FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aerospace 
Engineer, Avionics and Electrical Systems Services Section, FAA, New 
York ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; 
phone: 516-228-7367; fax: 516-794-5531; email: [email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2021-0097; Project Identifier 
MCAI-2020-01334-T'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
the proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
https://www.regulations.gov, including any personal information you 
provide. The agency will also post a report summarizing each 
substantive verbal contact received about this proposed AD.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to 
Steven Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems 
Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 
410, Westbury, NY 11590; phone: 516-228-7367; fax: 516-794-5531; email: 
[email protected]. Any commentary that the FAA receives which is 
not specifically designated as CBI will be placed in the public docket 
for this rulemaking.

Discussion

    Transport Canada Civil Aviation (TCCA), which is the aviation 
authority for Canada, has issued TCCA AD CF-2020-31, dated September 
23, 2020 (TCCA AD CF-2020-31) (referred to after this as the Mandatory 
Continuing Airworthiness Information, or the MCAI), to correct an 
unsafe condition for certain Bombardier, Inc., Model BD-100-1A10 
airplanes. You may examine the MCAI in the AD docket on the internet at 
https://www.regulations.gov

[[Page 11164]]

by searching for and locating Docket No. FAA-2021-0097.
    This proposed AD was prompted by reports of DCMP failures during 
production flight tests. These failures caused the electrical system 
generators to disconnect due to excessive induced voltage in the bus, 
caused by the DCMP overheating at high altitudes. The FAA is proposing 
this AD to address failures of the DCMP and electrical system 
generators, which could lead to the loss of normal electrical power on 
the airplane. See the MCAI for additional background information.

Related Service Information Under 1 CFR Part 51

    Bombardier has issued Service Bulletin 100-29-18, Revision 03, 
dated December 18, 2014. This service information describes procedures 
for installing the redesigned DCMP electric motor assembly, having part 
number (P/N) 945202-3 (including a wiring modification and a structural 
modification).
    This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

FAA's Determination

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to the FAA's bilateral agreement with the State of Design Authority, 
the FAA has been notified of the unsafe condition described in the MCAI 
and service information referenced above. The FAA is proposing this AD 
because the FAA evaluated all the relevant information and determined 
the unsafe condition described previously is likely to exist or develop 
on other products of the same type design.

Proposed Requirements of This NPRM

    This proposed AD would require accomplishing the actions specified 
in the service information described previously.

Costs of Compliance

    The FAA estimates that this proposed AD affects 239 airplanes of 
U.S. registry. The FAA estimates the following costs to comply with 
this proposed AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
68 work-hours x $85 per hour = $5,780........................         $18,964          $24,744       $5,913,816
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Would not affect intrastate aviation in Alaska, and
    (3) Would not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

Bombardier, Inc.: Docket No. FAA-2021-0097; Project Identifier MCAI-
2020-01334-T.

(a) Comments Due Date

    The FAA must receive comments on this airworthiness directive 
(AD) action by April 12, 2021.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Bombardier, Inc., Model BD-100-1A10 
airplanes, certificated in any category, serial numbers 20003 
through 20406 inclusive.

(d) Subject

    Air Transport Association (ATA) of America Code 29, Hydraulic 
power.

(e) Reason

    This AD was prompted by reports of DC motor pump (DCMP) failures 
during production flight tests. These failures caused the electrical 
system generators to disconnect due to excessive induced voltage in 
the bus, caused by the DCMP overheating at high altitudes. The FAA 
is issuing this AD to address failures of the DCMP and electrical 
system generators, which could lead to the loss of normal electrical 
power on the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Actions

    Within 6 months after the effective date of this AD: Install the 
redesigned DCMP electric motor assembly, having part number (P/N) 
945202-3, in accordance with the Accomplishment Instructions of 
Bombardier Service Bulletin 100-29-18, Revision 03, dated December 
18, 2014.

(h) Parts Installation Prohibition

    After accomplishing the installation required by paragraph (g) 
of this AD, no

[[Page 11165]]

person may install a DCMP having P/N MB74F-9/-7 on any airplane.

(i) Credit for Previous Actions

    This paragraph provides credit for actions required by paragraph 
(g) of this AD, if those actions were performed before the effective 
date of this AD using Bombardier Service Bulletin 100-29-18, dated 
July 2, 2013; Bombardier Service Bulletin 100-29-18, Revision 01, 
dated January 21, 2014; or Bombardier Service Bulletin 100-29-18, 
Revision 02, dated July 18, 2014.

(j) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York ACO Branch, FAA, has the authority to approve AMOCs for this 
AD, if requested using the procedures found in 14 CFR 39.19. In 
accordance with 14 CFR 39.19, send your request to your principal 
inspector or responsible Flight Standards Office, as appropriate. If 
sending information directly to the manager of the certification 
office, send it to ATTN: Program Manager, Continuing Operational 
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before 
using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, New York ACO 
Branch, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

(k) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) TCCA AD CF-2020-31, dated September 23, 2020, for related 
information. This MCAI may be found in the AD docket on the internet 
at https://www.regulations.gov by searching for and locating Docket 
No. FAA-2021-0097.
    (2) For more information about this AD, contact Steven 
Dzierzynski, Aerospace Engineer, Avionics and Electrical Systems 
Services Section, FAA, New York ACO Branch, 1600 Stewart Avenue, 
Suite 410, Westbury, NY 11590; phone: 516-228-7367; fax: 516-794-
5531; email: [email protected].
    (3) For service information identified in this AD, contact 
Bombardier, Inc., 200 C[ocirc]te-Vertu Road West, Dorval, 
Qu[eacute]bec H4S 2A3, Canada; North America toll-free telephone 1-
866-538-1247 or direct-dial telephone 1-514-855-2999; email 
[email protected]; internet https://www.bombardier.com. You 
may view this service information at the FAA, Airworthiness Products 
Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at 
the FAA, call 206-231-3195.

    Issued on February 11, 2021.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. 2021-03587 Filed 2-23-21; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.