Foreign-Trade Zone 273-West Memphis, Arkansas; Application for Subzone; Robert Bosch Tool Corporation, West Memphis, Arkansas, 68038 [2020-23743]

Download as PDF 68038 Federal Register / Vol. 85, No. 208 / Tuesday, October 27, 2020 / Notices (Authority: 5 U.S.C. 4314(c)(4)) DEPARTMENT OF COMMERCE Mary E. Bohman, Deputy Director, Bureau of Economic Analysis, Chair, OUS/EA Performance Review Board. Foreign-Trade Zones Board [FR Doc. 2020–23692 Filed 10–26–20; 8:45 am] BILLING CODE 3510–BS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–43–2020] Foreign-Trade Zone (FTZ) 61—San Juan, Puerto Rico; Authorization of Limited Production Activity; HP International Trading B.V. (Puerto Rico Branch), LLC (Inkjet Ink and 3D Printing Fluids (Bulk and Cartridges) and Related Subassemblies), Aguadilla, Puerto Rico On June 24, 2020, HP International Trading B.V. (Puerto Rico Branch), LLC submitted a notification of proposed production activity to the FTZ Board for its facility within Subzone 61V, in Aguadilla, Puerto Rico. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (85 FR 44275–44276, July 22, 2020). On October 22, 2020, the applicant was notified of the FTZ Board’s decision that further review of part of the proposed activity is warranted. The FTZ Board authorized the production activity described in the notification on a limited basis, subject to the FTZ Act and the Board’s regulations, including Section 400.14, and further subject to a restriction requiring admission of the following components in privileged foreign status (19 CFR 146.41): Pigment green 7; pigment blue 15, 15:1, 15:2, 15:3, 15:4, 15:6; pigment orange 43; and, magenta pigment (pigment red 122/pigment violet 19). Dated: October 22, 2020. Andrew McGilvray, Executive Secretary. [FR Doc. 2020–23745 Filed 10–26–20; 8:45 am] jbell on DSKJLSW7X2PROD with NOTICES BILLING CODE 3510–DS–P VerDate Sep<11>2014 18:26 Oct 26, 2020 Jkt 253001 [B–42–2020] Foreign-Trade Zone (FTZ) 219—San Luis, Arizona; Authorization of Production Activity; Barco Stamping Co., Inc. (Stamped Lighting Fixture Components), Yuma, Arizona On June 24, 2020, the Greater Yuma Economic Development Corporation, grantee of FTZ 219, submitted a notification of proposed production activity to the FTZ Board on behalf of Barco Stamping Co., Inc. (Barco), within FTZ 219, in Yuma, Arizona. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (85 FR 39880, July 2, 2020). On October 22, 2020, the applicant was notified of the FTZ Board’s decision that no further review of the activity is warranted at this time. The production activity described in the notification was authorized, subject to the FTZ Act and the FTZ Board’s regulations, including Section 400.14. Dated: October 22, 2020. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [S–184–2020] Foreign-Trade Zone 273—West Memphis, Arkansas; Application for Subzone; Robert Bosch Tool Corporation, West Memphis, Arkansas An application has been submitted to the Foreign-Trade Zones (FTZ) Board by the City of West Memphis, Arkansas Public Facilities Board, grantee of FTZ 273, requesting subzone status for the facility of Robert Bosch Tool Corporation, located in West Memphis, Arkansas. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on October 22, 2020. The proposed subzone (50 acres) is located at 2700 College Boulevard, West Memphis, Arkansas. No authorization for production activity has been requested at this time. The proposed subzone would be subject to the existing activation limit of FTZ 273. Fmt 4703 Sfmt 4703 [FR Doc. 2020–23743 Filed 10–26–20; 8:45 am] BILLING CODE 3510–DS–P International Trade Administration BILLING CODE 3510–DS–P Frm 00006 Dated: October 22, 2020. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2020–23744 Filed 10–26–20; 8:45 am] PO 00000 In accordance with the FTZ Board’s regulations, Camille Evans of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is December 7, 2020. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to December 21, 2020. A copy of the application will be available for public inspection in the ‘‘Reading Room’’ section of the FTZ Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Camille Evans at Camille.Evans@ trade.gov or (202) 482–2350. [A–533–857] Certain Oil Country Tubular Goods From India: Correction to Notice of Final Results of Antidumping Duty Administrative Review and Determination of No Shipments; 2018– 2019 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) is correcting the final results of the administrative review of the antidumping duty order on certain oil country tubular goods (OCTG) from India. The period of review (POR) is September 1, 2018 through August 31, 2019. DATES: Applicable October 27, 2020. FOR FURTHER INFORMATION CONTACT: Kathryn Turlo, AD/CVD Operations, Office VII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3870. SUPPLEMENTARY INFORMATION: AGENCY: Correction On September 11, 2020, Commerce published in the Federal Register the E:\FR\FM\27OCN1.SGM 27OCN1

Agencies

[Federal Register Volume 85, Number 208 (Tuesday, October 27, 2020)]
[Notices]
[Page 68038]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-23743]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-184-2020]


Foreign-Trade Zone 273--West Memphis, Arkansas; Application for 
Subzone; Robert Bosch Tool Corporation, West Memphis, Arkansas

    An application has been submitted to the Foreign-Trade Zones (FTZ) 
Board by the City of West Memphis, Arkansas Public Facilities Board, 
grantee of FTZ 273, requesting subzone status for the facility of 
Robert Bosch Tool Corporation, located in West Memphis, Arkansas. The 
application was submitted pursuant to the provisions of the Foreign-
Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the regulations of 
the FTZ Board (15 CFR part 400). It was formally docketed on October 
22, 2020.
    The proposed subzone (50 acres) is located at 2700 College 
Boulevard, West Memphis, Arkansas. No authorization for production 
activity has been requested at this time. The proposed subzone would be 
subject to the existing activation limit of FTZ 273.
    In accordance with the FTZ Board's regulations, Camille Evans of 
the FTZ Staff is designated examiner to review the application and make 
recommendations to the Executive Secretary.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the FTZ Board's Executive Secretary and sent to: 
[email protected]. The closing period for their receipt is December 7, 
2020. Rebuttal comments in response to material submitted during the 
foregoing period may be submitted during the subsequent 15-day period 
to December 21, 2020.
    A copy of the application will be available for public inspection 
in the ``Reading Room'' section of the FTZ Board's website, which is 
accessible via www.trade.gov/ftz.
    For further information, contact Camille Evans at 
[email protected] or (202) 482-2350.

    Dated: October 22, 2020.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2020-23743 Filed 10-26-20; 8:45 am]
BILLING CODE 3510-DS-P