Certain New Chemicals; Receipt and Status Information for September 2020, 66552-66557 [2020-23170]
Download as PDF
<![CDATA[
66552
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
phosphogypsum uneconomical at
distances greater than about 200 miles
from a stack.3 In that case, the regional
distribution of phosphogypsum stacks
suggests that its use for road
construction would likely be
concentrated in the southeastern part of
the country but could also occur in
western states such as Idaho and
Wyoming.
C. TFI’s Risk Assessment
As required by Subpart R, TFI
submitted a risk assessment as part of its
request.4 The risk assessment assessed
potential exposures to individuals in
various scenarios involving road users,
nearby residents, and road construction
workers. TFI’s exposure scenarios and
modeling approaches were largely
consistent with the EPA’s 1992 analysis,
as were the overall results.
The EPA finds TFI’s risk assessment
to adequately demonstrate that the use
of phosphogypsum in road construction
will be at least as protective of human
health, in the short- and long-term, as
stacking.5 However, as in 1992, the EPA
remains concerned about potential
exposures should the road become
abandoned, particularly for a residence
built on road material containing
phosphogypsum. The EPA does not
agree that TFI’s assumptions in its
analysis of this scenario, such as the use
of radon resistant home construction
techniques, could be relied upon to
limit the potential risks to a future
residential individual from such an
occurrence. In this case, however, the
EPA believes that this risk can be
acceptably mitigated by including
appropriate terms and conditions in the
approval.
In defining its request and exposure
scenarios, TFI’s risk assessment assumes
certain limitations involving the
construction and placement of roads.
For example, phosphogypsum
incorporated into the road base and the
road surface is limited in its radium-226
concentration and is assumed to be
mixed with other materials in limited
proportions. The terms and conditions
of the approval reflect these
assumptions and limitations.
3 ‘‘Economic Analysis of Phosphogypsum Reuse,’’
prepared for TFI by Policy Navigation Group,
submitted as Appendix 6 to TFI’s Revised Request,
December 2019, page 19.
4 ‘‘Radiological Risk Assessment in Support of
Petition for Beneficial Use of Phosphogypsum,’’
prepared for TFI by Arcadis Canada Inc., submitted
as Appendix 2 to TFI’s Revised Request, October
2019.
5 ‘‘Review of the Radiological Risk Assessment
Submitted in Support of Request for Approval of
Other Use of Phosphogypsum,’’ October 2019, The
Fertilizer Institute.
VerDate Sep<11>2014
18:08 Oct 19, 2020
Jkt 253001
D. Terms and Conditions of the
Approval
The EPA has determined that, subject
to the terms and conditions summarized
below, phosphogypsum may be
removed from stacks and used in
government road projects, as requested
by TFI. This approval to use
phosphogypsum in road construction
does not authorize the removal of any
phosphogypsum from any stacks or the
use of any phosphogypsum for road
construction unless and until the
information required by the ‘‘Initial
Conditions,’’ below, is provided to EPA.
Only after such information is provided
to EPA, may phosphogypsum be
removed from stacks and used in road
construction, further provided that the
conditions expressed in ‘‘Other
Conditions,’’ below, continue to be met.
A complete listing of the terms and
conditions applicable to this approval
may be found in the approval letter.6
Additional supporting documentation,
such as the complete TFI request and
risk assessment, are also in the docket.
1. Initial Conditions
Prior to the distribution and/or use of
phosphogypsum for any government
road project, the owner or operator of
the stack from which phosphogypsum is
to be distributed or the governmental
entity responsible for building and
maintaining the road, as appropriate,
must submit to the Agency all
information required by 40 CFR
61.206(b), as more specifically described
in the approval letter.
Conditions 7
2. Other
Subsequent to the provision of the
initial required information to EPA,
phosphogypsum may be used in
government road projects in accordance
with additional conditions, as stated in
the approval letter, including, for
example, conditions related to:
6 Letter from Andrew Wheeler, Administrator,
Environmental Protection Agency, to Corey
Rosenbusch, President and CEO, The Fertilizer
Institute, Docket No. EPA–HQ–OAR–2020–0442.
7 In addition to the information required by 40
CFR 61.206(b), as noted in connection with the
‘‘Initial Conditions,’’ the ‘‘Other Conditions’’
include conditions associated with the
requirements of 40 CFR 61.206(d) and 61.207–
61.209; conditions inherent in the nature of or
limitations or assumptions associated with TFI’s
request; and conditions imposed under the EPA’s
authority and discretion under 40 CFR 61.206(e).
The EPA believes that these conditions are either
required by 40 CFR part 61, subpart R or are
reasonably appropriate to help provide continued
assurance that the use is at least as protective as
disposal of phosphogypsum in stacks and will
ensure that the removal of phosphogypsum from
stacks and use in government road projects will be
consistent with TFI’s request and will occur with
public notice and appropriate information
availability.
PO 00000
Frm 00020
Fmt 4703
Sfmt 4703
• Continued control, maintenance,
and use of the road;
• Sampling, certification, and recordkeeping requirements in 40 CFR
61.206(d) and 61.207 through 61.209;
• Construction of the road consistent
with the assumptions, scenarios,
limitations, and parameters analyzed in
TFI’s risk assessment, including an
average radium content of no more than
35 pCi/g, no more than 2.25% PG by
weight in surface pavement and no
more than 50% PG by weight in the
road base; and
• Notification and availability of
information for the public and road
construction workers on the use of
phosphogypsum in the road project.
Any use of phosphogypsum not
consistent with the terms and
conditions and any other limitations set
forth in this approval shall be construed
as unauthorized distribution of
phosphogypsum and may constitute a
violation of or noncompliance with 40
CFR part 61, subpart R. This approval is
pursuant to Subpart R promulgated
under the authority of the Clean Air Act.
This approval does not relieve TFI,
phosphogypsum stack owners or
operators or resellers, retailers,
distributors, or end users or other
entities handling, processing or using
phosphogypsum of responsibility to
comply with other applicable laws and
regulations.
Andrew Wheeler,
Administrator.
[FR Doc. 2020–23154 Filed 10–19–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2020–0077; FRL–10015–
81]
Certain New Chemicals; Receipt and
Status Information for September 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
SUMMARY:
E:\FR\FM\20OCN1.SGM
20OCN1
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 09/01/2020 to
09/30/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
November 19, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, through the Federal
eRulemaking Portal at https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
Due to the public health concerns
related to COVID–19, the EPA Docket
Center (EPA/DC) and Reading Room is
closed to visitors with limited
exceptions. The staff continues to
provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (MC 7407M), Office of
Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
09/01/2020 to 09/30/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
VerDate Sep<11>2014
18:08 Oct 19, 2020
Jkt 253001
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
PO 00000
Frm 00021
Fmt 4703
Sfmt 4703
66553
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
E:\FR\FM\20OCN1.SGM
20OCN1
66554
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 09/01/2020 TO 09/30/2020
Case No.
Received
date
Version
Manufacturer
Use
(G) Processing aid .........................................
P–16–0345A ...
7
08/31/2020
CBI .............................
P–16–0370A ...
P–16–0404A ...
5
4
09/14/2020
09/22/2020
CBI .............................
CBI .............................
P–16–0589A ...
5
09/25/2020
Chemtura Corporation
P–17–0193A ...
3
09/25/2020
Chemtura Corporation
P–18–0128A ...
4
09/02/2020
CBI .............................
P–18–0143A ...
9
08/29/2020
Huntsman International LLC.
P–18–0289A ...
6
09/09/2020
CBI .............................
P–18–0289A ...
7
09/23/2020
CBI .............................
P–18–0290A ...
6
09/09/2020
CBI .............................
P–18–0290A ...
7
09/23/2020
CBI .............................
P–18–0330A ...
5
09/21/2020
CBI .............................
P–18–0334A ...
P–18–0335A ...
P–18–0336A ...
3
3
5
09/22/2020
09/22/2020
09/22/2020
Sirrus, Inc ...................
Sirrus, Inc ...................
Sirrus, Inc ...................
P–18–0337A ...
5
09/22/2020
Sirrus, Inc ...................
P–18–0387A ...
5
09/01/2020
CBI .............................
P–18–0388A ...
5
09/01/2020
CBI .............................
P–18–0407A ...
5
09/08/2020
CBI .............................
P–18–0407A ...
6
09/15/2020
CBI .............................
VerDate Sep<11>2014
18:08 Oct 19, 2020
Jkt 253001
PO 00000
Frm 00022
Chemical substance
(G) Acrylamide, polymer with methacrylic
acid derivatives.
(G) Crosslinker for adhesives and coatings ... (G) Methoxy-terminated polysiloxanes.
(G) A colorant for dyeing various synthetic fi- (G) Alkyl ester, 2-({4-[2-(trisubstituted
bers and fabrics. Open, non-dispersive use.
phenyl)azo]-5-acetamido-2substitutedphenyl} (substituted
alkoxy)amino).
(G) Synthetic aircraft engine lubricant for
(G) Pentaerythritol Ester of Mixed Linear and
contained use Industrial lubricant.
Branched Carboxylic Acids.
(G) Synthetic lubricant for contained use In(G) Dipentaerythritol Ester of Mixed Linear
dustrial lubricant.
and Branched Carboxylic Acids; (G) Pentaerythritol Ester of Mixed Linear and
Branched Carboxylic Acids;.
(G) Surface modifier ....................................... (S) Inulin, 2-hydroxy-3(trimethylammonio)propyl ether, chloride.
(G) Anti-corrosive primer for outdoor indus(G) Fatty acids, tall-oil polymers with
trial applications.
aminoalkyl, dialkyl alkane diamine,
polyalkylene polyamine alkanepolyamine
fraction, and tris-[(alkylamino) alkyl] phenol.
(G) Gas scrubbing, landfill deodorizing,
(G) 2-(2(methylcaboxymonocyclic)
wastewater deodorizing.
amino)ethoxy)-alcohol.
(G) Gas scrubbing, landfill deodorizing,
(G) 2wastewater deodorizing.
(2(methylcaboxymonocyclic)amino)ethoxy)alcohol.
(G) wastewater deodorizing, Gas scrubbing,
(G) Carbomonocylic-oxazolidine.
Landfill odor neutralizing.
(G) Gas scrubbing, Landfill odor neutralizing, (G) Carbomonocylic-oxazolidine.
wastewater deodorizing.
(G) initiator ...................................................... (G) Formaldehyde, polymer with alkyl aryl
ketone.
(S) Intermediate use ....................................... (S) Propanedioic acid, 1,3-dihexyl ester.
(S) Intermediate use ....................................... (S) Propanedioic acid, 1,3-dicyclohexyl ester.
(S) Intermediate use ....................................... (S) Propanedioic acid, 2,2bis(hydroxymethyl)-, 1,3-dihexyl ester.
(S) Intermediate use ....................................... (S) Propanedioic acid, 2,2bis(hydroxymethyl)-, 1,3-dicyclohexyl ester.
(G) Plastic Additive ......................................... (G) Alkanal, reaction products with alkanediyl
bis[alkyl-tris(alkyl-heterocycle)-1,3,5-triazine-2,4,6-triamine and hydrogen peroxide.
(G) Plastic additive ......................................... (G) 1,3,5-triazine-2,4,6-triamine, alkanediyl
bis[alkyl-tris(alkyl-heterocycle)-, allyl
derivs., oxidized, hydrogenated.
(S) Polyurethane catalyst ............................... (S) 1,2-Ethanediamine, N,N-dimethyl-N-(1methylethyl)-N-[2-[methyl(1methylethyl)amino]ethyl]-.
(S) Polyurethane catalyst ............................... (S) 1,2-Ethanediamine, N,N-dimethyl-N-(1methylethyl)-N-[2-[methyl(1methylethyl)amino]ethyl]-.
Fmt 4703
Sfmt 4703
E:\FR\FM\20OCN1.SGM
20OCN1
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
66555
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 09/01/2020 TO 09/30/2020—Continued
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) 1,2-Ethanediamine, N,N-dimethyl-N-(1methylethyl)-N-[2-[methyl(1methylethyl)amino]ethyl]-.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro.omega.-hydroxy-, mono-C12-14-alkyl
ethers, phosphates, sodium salts.
(G) fatty acid alkyl amide, (dialkyl) amino
alkyl, alkyl quaternized, salts.
(G) fatty acid alkyl amide, (dialkyl) amino
alkyl, alkyl quaternized, salts.
(G) Hexanedioic acid, carbomonocyclic
esters.
(G) 2-Propenoic acid, 2-hydroxyethyl ester,
reaction products with dialkyl hydrogen
heterosubstituted phosphate and dimethyl
phosphonate.
(G) 2,5-Furandione, reaction products with
alkylamine, 1-octanol and polyethylene glycol alkoxy-ether, acetates (salts).
(G) Mixed Metal Oxide.
P–18–0407A ...
7
09/21/2020
CBI .............................
(S) Polyurethane catalyst ...............................
P–19–0048A ...
8
09/23/2020
CBI .............................
(G) Coating additive .......................................
P–19–0162A ...
3
09/18/2020
CBI .............................
(G) Component in Oil Production ...................
P–19–0162A ...
4
09/29/2020
CBI .............................
(G) Component in Oil Production ...................
P–20–0030A ...
3
09/10/2020
CBI .............................
P–20–0066A ...
3
09/14/2020
CBI .............................
(S) Plasticizer for Plastisols, in caulks and
sealants.
(G) Antiwear additive for lubricants ................
P–20–0073A ...
5
09/25/2020
CBI .............................
(G) Oil and gas production chemistry ............
P–20–0099A ...
7
09/15/2020
Materion Advanced
Chemicals.
P–20–0100A ...
5
09/02/2020
Evonik Corporation ....
P–20–0100A ...
6
09/11/2020
Evonik Corporation ....
P–20–0108A ...
4
09/11/2020
CBI .............................
(S) A material used for the production of Li
ion conductive separators for rechargeable
batteries.
(S) Manual dish detergent, hard Surface
cleaner, laundry detergent.
(S) Manual dish detergent, hard Surface
cleaner, laundry detergent.
(G) Film-forming polymer ...............................
P–20–0111A ...
2
09/25/2020
CBI .............................
P–20–0144 ......
2
09/16/2020
CBI .............................
(G) Component in flexible automotive interior
parts.
(G) Asphalt emulsion applications .................
P–20–0162 ......
2
08/31/2020
CBI .............................
(G) Photolithography ......................................
P–20–0166 ......
1
08/21/2020
Sun Chemical ............
(G) Component of ink .....................................
P–20–0167 ......
2
08/31/2020
W. R. Grace & Co.—
Conn.
(G) Catalyst ....................................................
P–20–0168 ......
2
09/14/2020
CBI .............................
P–20–0168A ...
3
09/22/2020
CBI .............................
P–20–0170 ......
3
09/09/2020
P–20–0171 ......
3
09/09/2020
P–20–0172 ......
3
09/09/2020
P–20–0173 ......
1
09/01/2020
Tetramer Technologies, LLC.
Tetramer Technologies, LLC.
Tetramer Technologies, LLC.
ICM Products Inc .......
(S) Lubricating additives for engine oils,
transmission and hydraulic fluid and gear
oil applications.
(S) Lubricating additives for engine oils,
transmission and hydraulic fluid and gear
oil applications.
(G) Component in Lubricants .........................
P–20–0174 ......
3
09/17/2020
P2 Science, Inc ..........
P–20–0175 ......
2
09/21/2020
Materia Inc .................
(S) For use in consumer products, as well as
direct addition to consumer products.
(G) Resin formulation additive .......................
P–20–0176 ......
2
09/21/2020
Materia Inc .................
(G) Resin formulation additive .......................
P–20–0177 ......
2
09/21/2020
Materia Inc .................
(G) Resin formulation additive .......................
P–20–0178 ......
2
09/21/2020
Materia Inc .................
(G) Resin formulation additive .......................
P–20–0179 ......
1
09/08/2020
CBI .............................
(S) Reactive polymer for use in surface pretreatment.
VerDate Sep<11>2014
19:15 Oct 19, 2020
Jkt 253001
PO 00000
Frm 00023
(S) Refer to attachment ‘‘Chemical Identity’’.
(G) Rhamnolipids, modified pseudomonasfermented, from dextrose.
(G) Alkanoic acid, compds. with
diphenolmethane derivative-N1,N1-dialkyl1,3-alkanediamine-epiclorohydrin-2-cyclic
ester homopolymer with dialkylene glycol
(2:1) polymer-dialkanolamine reaction
products.
(S) 1,2,4-Benzenetricarboxylic acid, 1,2,4trinonyl ester.
(S) Fatty acids, soya, reaction products with
polyethylenepolyamines.
(G) Sulfonium, triaryl-, 3,3,3-trihalo-2sulfoalkyl polycycloalkane-1-carboxylate
(1:1).
(G) Formaldehyde, polymer with 2methylcarbomonocycle, glycidyl ether, acrylate hydrogen 1,2carbomonocyledicarboxylate,
(G) Phenylene, alkyl and
polycarbomonocycle substituted, 1,2dicarboxylate.
(G) Polyolefin polyamine succinimide,
carbopolycycle alkoxylated.
(G) Polyolefin polyamine succinimide,
carbopolycycle alkoxylated.
(G) Glycerin, alkoxylated alkyl acid esters.
(G) Component in Lubricants .........................
(G) Glycerin, alkoxylated alkyl acid esters.
(G) Component in Lubricants .........................
(G) Glycerin, alkoxylated alkyl acid esters.
(G) Use as a Coating Additive .......................
(G) Silsesquioxanes, alkyl, alkoxy- and
hydroxy- terminated.
(S) 6-Octen-1-ol, 3,7-dimethyl-,
homopolymer, monoacetate.
(G) acid N-[4-(4-diarylalkyl]-, carbopolycyclic
alkenyl, methyl ester.
(G) acid N-(diarylalkyl)-, carbopolycyclic alkenyl, methyl ester.
(G) carbopolycyclic alkenyl, 2-carboxylic
acid, 2-[[[4-(4-diarylalkyl)]carbonyl]oxy]ethyl
ester.
(G) carbopolycyclic alkenyl, 2-carboxylic
acid, 2-[[[(diarylalkyl)]carbonyl]oxy]ethyl
ester.
(G) 1,3-Benzenedicarboxylic acid, polymer
with 1,4-benzenedicarboxylic acid,
branched alkyl diol, and alkyldiol, bis[[[[bis
(isocyanatophenoxy)phosphinothioyl]
oxy]phenyl]carbamate],
Fmt 4703
Sfmt 4703
E:\FR\FM\20OCN1.SGM
20OCN1
66556
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 09/01/2020 TO 09/30/2020—Continued
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
P–20–0179A ...
2
09/14/2020
CBI .............................
(S) Reactive polymer for use in surface pretreatment.
P–20–0180 ......
1
09/08/2020
P–20–0181 ......
1
09/11/2020
Evonik Degussa Corporation.
Guardian Industries
Corp.
P–20–0182 ......
1
09/15/2020
P–20–0183 ......
1
09/16/2020
Eastman Chemical
Company, Inc.
CBI .............................
(S) Curing agent for Industrial epoxy Composite.
(S) Additive to influence melting temperature
of raw material and physical characteristics
of the final product during the manufacture
of flat glass, Animal bedding additive used
as a dessicant.
(G) Plasticizer for PVC formulations ..............
P–20–0184 ......
1
09/24/2020
P2 Science, Inc ..........
(G) Intermediate .............................................
(S) For use in fragrances for consumer products, as well as direct addition to consumer products.
(G) 1,3-Benzenedicarboxylic acid, polymer
with 1,4-benzenedicarboxylic acid,
branched alkyl diol, and alkyldiol, bis[[[[bis
(isocyanatophenoxy)phosphinothioyl]
oxy]phenyl]carbamate],
(S) Cyclohexanemethanamine,5-amino-1,3,3trimethy-, N-sec-Bu dervis.
(S) flue dust, glass-manugf. desulfurization,
calcium hydroxide-treated.
(S) 1,4-Benzenedicarboxylic acid, bis[2-(2butoxyethoxy)ethyl] ester (9CI).
(G) Aryl ether epoxide, homopolymer, ether
with alkanolamine.
(S) 6-Octen-1-ol, 3,7-dimethyl-,
homopolymer.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 09/01/2020 TO 09/30/2020
Received
date
Case No.
If amendment,
type of
amendment
Commencement
date
J–20–0012 .....
09/18/2020
08/31/2020
N
P–14–0787 ....
09/21/2020
08/27/2020
N
P–17–0333 ....
09/15/2020
09/13/2020
N
P–17–0395 ....
P–18–0329 ....
09/21/2020
09/28/2020
09/16/2020
09/09/2020
N
N
P–19–0053 ....
P–20–0038 ....
P–20–0104 ....
08/31/2020
09/10/2020
09/16/2020
08/26/2020
08/21/2020
09/01/2020
N
N
N
Chemical substance
(G) Biofuel producing saccharomyces cerevisiae modified, genetically
stable.
(S) Bismuth, 1,1′,1″,1′′′-(1,2-ethanediyldinitrilo)tetrakis[2-propanol]
neodecanoate complexes.
(G) 2-propenoic acid, mixed esters with heterocyclic dimethanol and
heterocyclic methanol.
(G) Alkyl tri dithiocarbmate tri salt.
(G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer
with alkanediol and carbopolycyclic bis (substituted carbopolycycle)
bisalkanol.
(S) 1-butanamine, n-butyl-n-[(triethoxysilyl)methyl]-.
(S) 1,3,5-triazine-2,4,6(1h,3h,5h)-trione, 1,3,5-tris[3-(2-oxiranyl)propyl]-.
(G) Alkenoic acid, polymer with (alkyl alkenyl) polyether.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 09/01/2020 TO 09/30/2020
Received
date
Case No.
Type of test information
P–16–0370 .....
09/14/2020
P–16–0370 .....
09/14/2020
P–16–0543 .....
09/17/2020
VerDate Sep<11>2014
19:15 Oct 19, 2020
Chemical substance
Subchronic Inhalation Toxicity 90-Day Study (OECD
Test Guideline 413).
Subchronic Inhalation Toxicity 90-Day Study (OECD
Test Guideline 413).
Exposure Monitoring Report ........................................
Jkt 253001
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
(G) Methoxy-terminated polysiloxanes.
(G) Polysiloxane with functional groups.
(G) Halogenophosphoric acid metal salt.
E:\FR\FM\20OCN1.SGM
20OCN1
Federal Register / Vol. 85, No. 203 / Tuesday, October 20, 2020 / Notices
66557
TABLE III—TEST INFORMATION RECEIVED FROM 09/01/2020 TO 09/30/2020—Continued
Received
date
Case No.
P–19–0098 .....
09/16/2020
P–20–0062 .....
09/16/2020
P–20–0098 .....
09/22/2020
SN–17–0011 ..
09/21/2020
Type of test information
Chemical substance
Algal, Growth Inhibiton Test with Pseudokirchneriella
subcapitata, 72 hours (OECD Test Guideline 201)
and Acute Immobilization Test to Daphnia magna,
Semi-static, 48 hours (OECD Test Guideline 202).
Cobalt Oxide Test Data ...............................................
(G) Phosphoric acid, polymer with (hydroxyalkyl)alkanediol and alkanediol.
Eye Irritation Study, Dermal Irritation Study, Acute
Oral Toxicity Study, Acute Dermal Toxicity Study,
90-Day Oral Toxicity Study, Ames Test, Chromosomal Aberration Test, Mouse Lymphoma Assay,
and Skin Sensitization Test. All test submitted on
an analogue.
Acute Immobilization Test with Daphnia magna .........
(S) Multi-walled carbon nanotubes; closed; 4.4–12.8
nm diameter; bundle length 10.6–211.1 um; grade:
Jenotube 6 (substance-1).
(G) Calcium cycloalkylcarboxylate.
(G) Polyfluorohydrocarbon.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: OPP Docket, Environmental
Protection Agency Docket Center (EPA/
DC), (28221T), 1200 Pennsylvania Ave.
NW, Washington, DC 20460–0001.
(Authority: 15 U.S.C. 2601 et seq.)
• Hand Delivery: To make special
Dated: October 7, 2020.
arrangements for hand delivery or
Pamela Myrick,
delivery of boxed information, please
Director, Information Management Division,
follow the instructions at https://
Office of Pollution Prevention and Toxics.
www.epa.gov/dockets/where-send[FR Doc. 2020–23170 Filed 10–19–20; 8:45 am]
comments-epa-dockets.
BILLING CODE 6560–50–P
Due to the public health concerns
related to COVID–19, the EPA Docket
Center (EPA/DC) and Reading Room is
ENVIRONMENTAL PROTECTION
closed to visitors with limited
AGENCY
exceptions. The staff continues to
provide remote customer service via
[EPA–HQ–OPP–2020–0049; FRL–10015–91]
email, phone, and webform. For the
latest status information on EPA/DC
Pesticide Product Registration;
Receipt of Applications for New Active services and docket access, visit https://
www.epa.gov/dockets.
Ingredients (September 2020)
FOR FURTHER INFORMATION CONTACT:
AGENCY: Environmental Protection
Marietta Echeverria, Registration
Agency (EPA).
Division (7505P), main telephone
ACTION: Notice.
number: (703) 305–7090, email address:
SUMMARY: EPA has received applications RDFRNotices@epa.gov; The mailing
to register pesticide products containing address for each contact person is:
Office of Pesticide Programs,
active ingredients not included in any
Environmental Protection Agency, 1200
currently registered pesticide products.
Pennsylvania Ave. NW, Washington, DC
Pursuant to the Federal Insecticide,
20460–0001. As part of the mailing
Fungicide, and Rodenticide Act
(FIFRA), EPA is hereby providing notice address, include the contact person’s
name, division, and mail code.
of receipt and opportunity to comment
SUPPLEMENTARY INFORMATION:
on these applications.
DATES: Comments must be received on
I. General Information
or before November 19, 2020.
A. Does this action apply to me?
ADDRESSES: Submit your comments,
You may be potentially affected by
identified by docket identification (ID)
this action if you are an agricultural
number and the File Symbol of interest
producer, food manufacturer, or
as shown in the body of this document,
pesticide manufacturer. The following
by one of the following methods:
• Federal eRulemaking Portal: https:// list of North American Industrial
www.regulations.gov. Follow the online Classification System (NAICS) codes is
instructions for submitting comments.
not intended to be exhaustive, but rather
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
VerDate Sep<11>2014
18:08 Oct 19, 2020
Jkt 253001
PO 00000
Frm 00025
Fmt 4703
Sfmt 4703
provides a guide to help readers
determine whether this document
applies to them. Potentially affected
entities may include:
• Crop production (NAICS code 111).
• Animal production (NAICS code
112).
• Food manufacturing (NAICS code
311).
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
commenting-epa-dockets.
II. Registration Applications
EPA has received applications to
register pesticide products containing
active ingredients not included in any
currently registered pesticide products.
Pursuant to the provisions of FIFRA
section 3(c)(4) (7 U.S.C. 136a(c)(4)), EPA
is hereby providing notice of receipt and
opportunity to comment on these
applications. Notice of receipt of these
applications does not imply a decision
E:\FR\FM\20OCN1.SGM
20OCN1
]]>Agencies
[Federal Register Volume 85, Number 203 (Tuesday, October 20, 2020)]
[Notices]
[Pages 66552-66557]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-23170]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10015-81]
Certain New Chemicals; Receipt and Status Information for
September 2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption
[[Page 66553]]
application (Biotech exemption); an application for a test marketing
exemption (TME), both pending and/or concluded; a notice of
commencement (NOC) of manufacture (including import) for new chemical
substances; and a periodic status report on new chemical substances
that are currently under EPA review or have recently concluded review.
This document covers the period from 09/01/2020 to 09/30/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before November 19, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, through the Federal
eRulemaking Portal at https://www.regulations.gov. Follow the online
instructions for submitting comments. Do not submit electronically any
information you consider to be Confidential Business Information (CBI)
or other information whose disclosure is restricted by statute.
Due to the public health concerns related to COVID-19, the EPA
Docket Center (EPA/DC) and Reading Room is closed to visitors with
limited exceptions. The staff continues to provide remote customer
service via email, phone, and webform. For the latest status
information on EPA/DC services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 09/01/2020 to 09/30/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the
[[Page 66554]]
passage of the Lautenberg amendments to TSCA in 2016, public interest
in information on the status of section 5 cases under EPA review and,
in particular, the final determination of such cases, has increased. In
an effort to be responsive to the regulated community, the users of
this information, and the general public, to comply with the
requirements of TSCA, to conserve EPA resources and to streamline the
process and make it more timely, EPA is providing information on its
website about cases reviewed under the amended TSCA, including the
section 5 PMN/SNUN/MCAN and exemption notices received, the date of
receipt, the final EPA determination on the notice, and the effective
date of EPA's determination for PMN/SNUN/MCAN notices on its website
at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 09/01/2020 to 09/30/2020
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0345A........ 7 08/31/2020 CBI............... (G) Processing aid.... (G) Acrylamide,
polymer with
methacrylic acid
derivatives.
P-16-0370A........ 5 09/14/2020 CBI............... (G) Crosslinker for (G) Methoxy-terminated
adhesives and polysiloxanes.
coatings.
P-16-0404A........ 4 09/22/2020 CBI............... (G) A colorant for (G) Alkyl ester, 2-({4-
dyeing various [2-(trisubstituted
synthetic fibers and phenyl)azo]-5-
fabrics. Open, non- acetamido-2-
dispersive use. substitutedphenyl{tim
e (substituted
alkoxy)amino).
P-16-0589A........ 5 09/25/2020 Chemtura (G) Synthetic aircraft (G) Pentaerythritol
Corporation. engine lubricant for Ester of Mixed Linear
contained use and Branched
Industrial lubricant. Carboxylic Acids.
P-17-0193A........ 3 09/25/2020 Chemtura (G) Synthetic (G) Dipentaerythritol
Corporation. lubricant for Ester of Mixed Linear
contained use and Branched
Industrial lubricant. Carboxylic Acids; (G)
Pentaerythritol Ester
of Mixed Linear and
Branched Carboxylic
Acids;.
P-18-0128A........ 4 09/02/2020 CBI............... (G) Surface modifier.. (S) Inulin, 2-hydroxy-
3-
(trimethylammonio)pro
pyl ether, chloride.
P-18-0143A........ 9 08/29/2020 Huntsman (G) Anti-corrosive (G) Fatty acids, tall-
International LLC. primer for outdoor oil polymers with
industrial aminoalkyl, dialkyl
applications. alkane diamine,
polyalkylene
polyamine
alkanepolyamine
fraction, and tris-
[(alkylamino) alkyl]
phenol.
P-18-0289A........ 6 09/09/2020 CBI............... (G) Gas scrubbing, (G) 2-
landfill deodorizing, (2(methylcaboxymonocy
wastewater clic)amino)ethoxy)-
deodorizing. alcohol.
P-18-0289A........ 7 09/23/2020 CBI............... (G) Gas scrubbing, (G) 2-
landfill deodorizing, (2(methylcaboxymonocy
wastewater clic)amino)ethoxy)-
deodorizing. alcohol.
P-18-0290A........ 6 09/09/2020 CBI............... (G) wastewater (G) Carbomonocylic-
deodorizing, Gas oxazolidine.
scrubbing, Landfill
odor neutralizing.
P-18-0290A........ 7 09/23/2020 CBI............... (G) Gas scrubbing, (G) Carbomonocylic-
Landfill odor oxazolidine.
neutralizing,
wastewater
deodorizing.
P-18-0330A........ 5 09/21/2020 CBI............... (G) initiator......... (G) Formaldehyde,
polymer with alkyl
aryl ketone.
P-18-0334A........ 3 09/22/2020 Sirrus, Inc....... (S) Intermediate use.. (S) Propanedioic acid,
1,3-dihexyl ester.
P-18-0335A........ 3 09/22/2020 Sirrus, Inc....... (S) Intermediate use.. (S) Propanedioic acid,
1,3-dicyclohexyl
ester.
P-18-0336A........ 5 09/22/2020 Sirrus, Inc....... (S) Intermediate use.. (S) Propanedioic acid,
2,2-
bis(hydroxymethyl)-,
1,3-dihexyl ester.
P-18-0337A........ 5 09/22/2020 Sirrus, Inc....... (S) Intermediate use.. (S) Propanedioic acid,
2,2-
bis(hydroxymethyl)-,
1,3-dicyclohexyl
ester.
P-18-0387A........ 5 09/01/2020 CBI............... (G) Plastic Additive.. (G) Alkanal, reaction
products with
alkanediyl bis[alkyl-
tris(alkyl-
heterocycle)-1,3,5-
triazine-2,4,6-
triamine and hydrogen
peroxide.
P-18-0388A........ 5 09/01/2020 CBI............... (G) Plastic additive.. (G) 1,3,5-triazine-
2,4,6-triamine,
alkanediyl bis[alkyl-
tris(alkyl-
heterocycle)-, allyl
derivs., oxidized,
hydrogenated.
P-18-0407A........ 5 09/08/2020 CBI............... (S) Polyurethane (S) 1,2-Ethanediamine,
catalyst. N,N-dimethyl-N-(1-
methylethyl)-N-[2-
[methyl(1-
methylethyl)amino]eth
yl]-.
P-18-0407A........ 6 09/15/2020 CBI............... (S) Polyurethane (S) 1,2-Ethanediamine,
catalyst. N,N-dimethyl-N-(1-
methylethyl)-N-[2-
[methyl(1-
methylethyl)amino]eth
yl]-.
[[Page 66555]]
P-18-0407A........ 7 09/21/2020 CBI............... (S) Polyurethane (S) 1,2-Ethanediamine,
catalyst. N,N-dimethyl-N-(1-
methylethyl)-N-[2-
[methyl(1-
methylethyl)amino]eth
yl]-.
P-19-0048A........ 8 09/23/2020 CBI............... (G) Coating additive.. (S) Poly(oxy-1,2-
ethanediyl), .alpha.-
hydro-.omega.-hydroxy-
, mono-C12-14-alkyl
ethers, phosphates,
sodium salts.
P-19-0162A........ 3 09/18/2020 CBI............... (G) Component in Oil (G) fatty acid alkyl
Production. amide, (dialkyl)
amino alkyl, alkyl
quaternized, salts.
P-19-0162A........ 4 09/29/2020 CBI............... (G) Component in Oil (G) fatty acid alkyl
Production. amide, (dialkyl)
amino alkyl, alkyl
quaternized, salts.
P-20-0030A........ 3 09/10/2020 CBI............... (S) Plasticizer for (G) Hexanedioic acid,
Plastisols, in caulks carbomonocyclic
and sealants. esters.
P-20-0066A........ 3 09/14/2020 CBI............... (G) Antiwear additive (G) 2-Propenoic acid,
for lubricants. 2-hydroxyethyl ester,
reaction products
with dialkyl hydrogen
heterosubstituted
phosphate and
dimethyl phosphonate.
P-20-0073A........ 5 09/25/2020 CBI............... (G) Oil and gas (G) 2,5-Furandione,
production chemistry. reaction products
with alkylamine, 1-
octanol and
polyethylene glycol
alkoxy-ether,
acetates (salts).
P-20-0099A........ 7 09/15/2020 Materion Advanced (S) A material used (G) Mixed Metal Oxide.
Chemicals. for the production of
Li ion conductive
separators for
rechargeable
batteries.
P-20-0100A........ 5 09/02/2020 Evonik Corporation (S) Manual dish (S) Refer to
detergent, hard attachment ``Chemical
Surface cleaner, Identity''.
laundry detergent.
P-20-0100A........ 6 09/11/2020 Evonik Corporation (S) Manual dish (G) Rhamnolipids,
detergent, hard modified pseudomonas-
Surface cleaner, fermented, from
laundry detergent. dextrose.
P-20-0108A........ 4 09/11/2020 CBI............... (G) Film-forming (G) Alkanoic acid,
polymer. compds. with
diphenolmethane
derivative-N1,N1-
dialkyl-1,3-
alkanediamine-
epiclorohydrin-2-
cyclic ester
homopolymer with
dialkylene glycol
(2:1) polymer-
dialkanolamine
reaction products.
P-20-0111A........ 2 09/25/2020 CBI............... (G) Component in (S) 1,2,4-
flexible automotive Benzenetricarboxylic
interior parts. acid, 1,2,4-trinonyl
ester.
P-20-0144......... 2 09/16/2020 CBI............... (G) Asphalt emulsion (S) Fatty acids, soya,
applications. reaction products
with
polyethylenepolyamine
s.
P-20-0162......... 2 08/31/2020 CBI............... (G) Photolithography.. (G) Sulfonium, triaryl-
, 3,3,3-trihalo-2-
sulfoalkyl
polycycloalkane-1-
carboxylate (1:1).
P-20-0166......... 1 08/21/2020 Sun Chemical...... (G) Component of ink.. (G) Formaldehyde,
polymer with 2-
methylcarbomonocycle,
glycidyl ether,
acrylate hydrogen 1,2-
carbomonocyledicarbox
ylate,
P-20-0167......... 2 08/31/2020 W. R. Grace & Co.-- (G) Catalyst.......... (G) Phenylene, alkyl
Conn. and
polycarbomonocycle
substituted, 1,2-
dicarboxylate.
P-20-0168......... 2 09/14/2020 CBI............... (S) Lubricating (G) Polyolefin
additives for engine polyamine
oils, transmission succinimide,
and hydraulic fluid carbopolycycle
and gear oil alkoxylated.
applications.
P-20-0168A........ 3 09/22/2020 CBI............... (S) Lubricating (G) Polyolefin
additives for engine polyamine
oils, transmission succinimide,
and hydraulic fluid carbopolycycle
and gear oil alkoxylated.
applications.
P-20-0170......... 3 09/09/2020 Tetramer (G) Component in (G) Glycerin,
Technologies, LLC. Lubricants. alkoxylated alkyl
acid esters.
P-20-0171......... 3 09/09/2020 Tetramer (G) Component in (G) Glycerin,
Technologies, LLC. Lubricants. alkoxylated alkyl
acid esters.
P-20-0172......... 3 09/09/2020 Tetramer (G) Component in (G) Glycerin,
Technologies, LLC. Lubricants. alkoxylated alkyl
acid esters.
P-20-0173......... 1 09/01/2020 ICM Products Inc.. (G) Use as a Coating (G) Silsesquioxanes,
Additive. alkyl, alkoxy- and
hydroxy- terminated.
P-20-0174......... 3 09/17/2020 P2 Science, Inc... (S) For use in (S) 6-Octen-1-ol, 3,7-
consumer products, as dimethyl-,
well as direct homopolymer,
addition to consumer monoacetate.
products.
P-20-0175......... 2 09/21/2020 Materia Inc....... (G) Resin formulation (G) acid N-[4-(4-
additive. diarylalkyl]-,
carbopolycyclic
alkenyl, methyl
ester.
P-20-0176......... 2 09/21/2020 Materia Inc....... (G) Resin formulation (G) acid N-
additive. (diarylalkyl)-,
carbopolycyclic
alkenyl, methyl
ester.
P-20-0177......... 2 09/21/2020 Materia Inc....... (G) Resin formulation (G) carbopolycyclic
additive. alkenyl, 2-carboxylic
acid, 2-[[[4-(4-
diarylalkyl)]carbonyl
]oxy]ethyl ester.
P-20-0178......... 2 09/21/2020 Materia Inc....... (G) Resin formulation (G) carbopolycyclic
additive. alkenyl, 2-carboxylic
acid, 2-
[[[(diarylalkyl)]carb
onyl]oxy]ethyl ester.
P-20-0179......... 1 09/08/2020 CBI............... (S) Reactive polymer (G) 1,3-
for use in surface Benzenedicarboxylic
pre-treatment. acid, polymer with
1,4-
benzenedicarboxylic
acid, branched alkyl
diol, and alkyldiol,
bis[[[[bis(isocyanato
phenoxy)phosphinothio
yl]oxy]phenyl]carbama
te],
[[Page 66556]]
P-20-0179A........ 2 09/14/2020 CBI............... (S) Reactive polymer (G) 1,3-
for use in surface Benzenedicarboxylic
pre-treatment. acid, polymer with
1,4-
benzenedicarboxylic
acid, branched alkyl
diol, and alkyldiol,
bis[[[[bis(isocyanato
phenoxy)phosphinothio
yl]oxy]phenyl]carbama
te],
P-20-0180......... 1 09/08/2020 Evonik Degussa (S) Curing agent for (S)
Corporation. Industrial epoxy Cyclohexanemethanamin
Composite. e,5-amino-1,3,3-
trimethy-, N-sec-Bu
dervis.
P-20-0181......... 1 09/11/2020 Guardian (S) Additive to (S) flue dust, glass-
Industries Corp. influence melting manugf.
temperature of raw desulfurization,
material and physical calcium hydroxide-
characteristics of treated.
the final product
during the
manufacture of flat
glass, Animal bedding
additive used as a
dessicant.
P-20-0182......... 1 09/15/2020 Eastman Chemical (G) Plasticizer for (S) 1,4-
Company, Inc. PVC formulations. Benzenedicarboxylic
acid, bis[2-(2-
butoxyethoxy)ethyl]
ester (9CI).
P-20-0183......... 1 09/16/2020 CBI............... (G) Intermediate...... (G) Aryl ether
epoxide, homopolymer,
ether with
alkanolamine.
P-20-0184......... 1 09/24/2020 P2 Science, Inc... (S) For use in (S) 6-Octen-1-ol, 3,7-
fragrances for dimethyl-,
consumer products, as homopolymer.
well as direct
addition to consumer
products.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 09/01/2020 to 09/30/2020
----------------------------------------------------------------------------------------------------------------
If amendment,
Case No. Received date Commencement date type of Chemical substance
amendment
----------------------------------------------------------------------------------------------------------------
J-20-0012...................... 09/18/2020 08/31/2020 N (G) Biofuel producing
saccharomyces cerevisiae
modified, genetically
stable.
P-14-0787...................... 09/21/2020 08/27/2020 N (S) Bismuth, 1,1',1'',1'''-
(1,2-
ethanediyldinitrilo)tetrak
is[2-propanol]
neodecanoate complexes.
P-17-0333...................... 09/15/2020 09/13/2020 N (G) 2-propenoic acid, mixed
esters with heterocyclic
dimethanol and
heterocyclic methanol.
P-17-0395...................... 09/21/2020 09/16/2020 N (G) Alkyl tri
dithiocarbmate tri salt.
P-18-0329...................... 09/28/2020 09/09/2020 N (G) Substituted
carbopolycyclic
dicarboxylic acid dialkyl
ester, polymer with
alkanediol and
carbopolycyclic bis
(substituted
carbopolycycle)
bisalkanol.
P-19-0053...................... 08/31/2020 08/26/2020 N (S) 1-butanamine, n-butyl-n-
[(triethoxysilyl)methyl]-.
P-20-0038...................... 09/10/2020 08/21/2020 N (S) 1,3,5-triazine-
2,4,6(1h,3h,5h)-trione,
1,3,5-tris[3-(2-
oxiranyl)propyl]-.
P-20-0104...................... 09/16/2020 09/01/2020 N (G) Alkenoic acid, polymer
with (alkyl alkenyl)
polyether.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 09/01/2020 to 09/30/2020
------------------------------------------------------------------------
Type of test Chemical
Case No. Received date information substance
------------------------------------------------------------------------
P-16-0370........... 09/14/2020 Subchronic (G) Methoxy-
Inhalation terminated
Toxicity 90-Day polysiloxanes.
Study (OECD
Test Guideline
413).
P-16-0370........... 09/14/2020 Subchronic (G) Polysiloxane
Inhalation with functional
Toxicity 90-Day groups.
Study (OECD
Test Guideline
413).
P-16-0543........... 09/17/2020 Exposure (G)
Monitoring Halogenophospho
Report. ric acid metal
salt.
[[Page 66557]]
P-19-0098........... 09/16/2020 Algal, Growth (G) Phosphoric
Inhibiton Test acid, polymer
with with
Pseudokirchneri (hydroxyalkyl)-
ella alkanediol and
subcapitata, 72 alkanediol.
hours (OECD
Test Guideline
201) and Acute
Immobilization
Test to Daphnia
magna, Semi-
static, 48
hours (OECD
Test Guideline
202).
P-20-0062........... 09/16/2020 Cobalt Oxide (S) Multi-walled
Test Data. carbon
nanotubes;
closed; 4.4-
12.8 nm
diameter;
bundle length
10.6-211.1 um;
grade: Jenotube
6 (substance-
1).
P-20-0098........... 09/22/2020 Eye Irritation (G) Calcium
Study, Dermal cycloalkylcarbo
Irritation xylate.
Study, Acute
Oral Toxicity
Study, Acute
Dermal Toxicity
Study, 90-Day
Oral Toxicity
Study, Ames
Test,
Chromosomal
Aberration
Test, Mouse
Lymphoma Assay,
and Skin
Sensitization
Test. All test
submitted on an
analogue.
SN-17-0011.......... 09/21/2020 Acute (G)
Immobilization Polyfluorohydro
Test with carbon.
Daphnia magna.
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
(Authority: 15 U.S.C. 2601 et seq.)
Dated: October 7, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-23170 Filed 10-19-20; 8:45 am]
BILLING CODE 6560-50-P
