Certain New Chemicals; Receipt and Status Information for August 2020, 60459-60464 [2020-21198]
Download as PDF
<![CDATA[
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
khammond on DSKJM1Z7X2PROD with NOTICES
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
3. Environmental justice. EPA seeks to
achieve environmental justice, the fair
treatment and meaningful involvement
of any group, including minority and/or
low-income populations, in the
development, implementation, and
enforcement of environmental laws,
regulations, and policies. To help
address potential environmental justice
issues, the Agency seeks information on
any groups or segments of the
population who, as a result of their
location, cultural practices, or other
factors, may have atypical or
disproportionately high and adverse
human health impacts or environmental
effects from exposure to the pesticide(s)
discussed in this document, compared
to the general population.
II. What action is the agency taking?
Under section 18 of the Federal
Insecticide, Fungicide, and Rodenticide
Act (FIFRA) (7 U.S.C. 136p), at the
discretion of the EPA Administrator, a
Federal or State agency may be
exempted from any provision of FIFRA
if the EPA Administrator determines
that emergency conditions exist which
require the exemption. NASA has
requested the EPA Administrator to
issue a specific exemption for the use of
ortho-phthalaldehyde (OPA) in the
coolant of the internal active thermal
control system (IATCS) of the
International Space Station (ISS) to
control aerobic/microaerophilic bacteria
in the aqueous coolant. Information in
accordance with 40 CFR part 166 was
submitted as part of this request.
As part of this request, the applicant
stated that it has considered the
registered biocide alternatives and has
concluded that OPA is the most
effective biocide which meets the
requisite criteria including: The need for
safe, non-intrusive implementation and
operation in a functioning system; the
ability to control existing planktonic
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
and biofilm-residing micro-organisms; a
negligible impact on system-wetted
materials of construction; and a
negligible reactivity with existing
coolant additives. The ISS would not
have an adequate long-term solution for
controlling the micro-organisms in the
IATCS coolant without the use of OPA.
The OPA is incorporated into a porous
resin material contained in a stainlesssteel canister. The canister containing
the OPA-incorporated resin is inserted
into a coolant system loop, using
flexible hose and quick disconnects, and
is placed in-line for 8 hours to deliver
the OPA into the fluid. As the coolant
fluid flows through the canister, the
OPA elutes from the resin material into
the coolant fluid. The total volume of
the circulatory loops of the IATCS is
829 liters. The maximum concentration
would be 500 milligrams (mg) of OPA
per liter of coolant fluid. A total of
414,500 mg of OPA would be needed for
the entire system. The OPA is
incorporated into the resin at 210 mg
OPA per cm3 resin, resulting in a
potential total use of 1,974 cm3 of the
OPA-containing resin. The level of OPA
in the coolant is monitored periodically,
and because OPA degrades over time,
the concentration decreases to a level
that is no longer effective in about 1 to
2 years. At this point, replenishment
with new OPA-containing canisters is
required. EPA has authorized similar
emergency exemptions for this use since
2011. With the decision to extend the
mission of the ISS to 2024, the need for
this use is expected to continue for the
duration.
This notice does not constitute a
decision by EPA on the application
itself. The regulations governing FIFRA
section 18 require publication of a
notice of receipt of an application for a
specific exemption proposing the use of
a new chemical (i.e, an active
ingredient), which has not been
registered by EPA. The notice provides
an opportunity for public comment on
the application.
The Agency will review and consider
all comments received during the
comment period in determining
whether to issue the specific exemption
requested by NASA.
Authority: 7 U.S.C. 136 et seq.
Dated: September 11, 2020.
Marietta Echeverria,
Acting Director, Registration Division, Office
of Pesticide Programs.
[FR Doc. 2020–21185 Filed 9–24–20; 8:45 am]
BILLING CODE 6560–50–P
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
60459
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2020–0077; FRL–10014–
64]
Certain New Chemicals; Receipt and
Status Information for August 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 08/01/2020 to
08/31/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
October 26, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Due to the public health concerns
related to COVID–19, the EPA Docket
SUMMARY:
E:\FR\FM\25SEN1.SGM
25SEN1
60460
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
Center (EPA/DC) and Reading Room is
closed to visitors with limited
exceptions. The staff continues to
provide remote customer service via
email, phone, and webform. For the
latest status information on EPA/DC
services and docket access, visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
khammond on DSKJM1Z7X2PROD with NOTICES
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
08/01/2020 to 08/31/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
a chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
PO 00000
Frm 00045
Fmt 4703
Sfmt 4703
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
E:\FR\FM\25SEN1.SGM
25SEN1
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
60461
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2020 TO 08/31/2020
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
P–16–0345A ......
6
08/09/2020
CBI ...................................
(G) Processing aid .....................................
P–16–0420A ......
3
07/31/2020
CBI ...................................
P–17–0115A ......
5
08/25/2020
CBI ...................................
P–17–0281A ......
P–18–0065A ......
7
2
08/05/2020
08/17/2020
CBI ...................................
Evonik Corporation ..........
(S) The notified substance will be used as
a fragrance ingredient, being blended
(mixed) with other fragrance ingredients
to make fragrance oils that will be sold
to industrial and commercial customers
for their incorporation into soaps, detergents, cleaners and other similar household and consumer products.
(S) An adhesion promoter for coating formulations.
(G) Water reducible resin ..........................
(S) Absorption agent and lab reagent .......
P–18–0202A ......
7
08/06/2020
Hexion, Inc .......................
P–18–0203A ......
7
08/06/2020
Hexion, Inc .......................
P–18–0204A ......
P–18–0205A ......
7
7
08/06/2020
08/06/2020
Hexion, Inc .......................
Hexion, Inc .......................
(G) Rubber additive and Tackifier additives.
(G) Rubber additive and Tackifier additives.
(G) Rubber additive and Tackifier additive
(G) Tackifier additive .................................
P–18–0206A ......
P–18–0241A ......
7
5
08/06/2020
07/31/2020
Hexion, Inc .......................
CBI ...................................
(G) Rubber additive and Tackifier additive
(G) Additive for automotive coating ...........
P–18–0244A ......
5
07/31/2020
CBI ...................................
(G) Additive for automotive coating ...........
P–18–0245A ......
5
07/31/2020
CBI ...................................
(G) Additive for automotive coating ...........
P–18–0256A ......
P–18–0273A ......
6
6
08/18/2020
08/14/2020
CBI ...................................
CBI ...................................
(G) Chemical intermediate ........................
(G) Used in polymer manufacturing ..........
P–18–0351A ......
P–18–0355A ......
3
4
08/19/2020
08/03/2020
CBI ...................................
CBI ...................................
(G) UV curable inks ...................................
(G) Paint ....................................................
P–18–0359A ......
4
08/18/2020
CBI ...................................
(G) Molded or extruded items ...................
P–18–0396A ......
5
08/17/2020
CBI ...................................
(G) Paint ....................................................
P–18–0398A ......
P–18–0399A ......
6
8
07/31/2020
08/14/2020
EVONIK Corporation ........
CBI ...................................
(S) Intermediate .........................................
(G) (c) open, non-dispersive use additive
for industrial use only.
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
PO 00000
Frm 00046
Fmt 4703
Sfmt 4703
Chemical substance
(G) Acrylamide, polymer with methacrylic acid
derivatives.
(G) Dimethyl cyclohexenyl propanol.
(G) Aminoalkyl alkoxysilane.
(G) Polysiloxane-polyester polyol carboxylate.
(S) 1,3-Propanediamine, N1,N1-dimethyl-N3(2,2,6,6-tetramethyl-4-piperidinyl)-.
(G) Trialkyl alkanal, polymer with phenol.
(G) Trialkyl alkanal, polymer with alkylalkanal
and phenol.
(G) Alkyl alkanal, polymer with phenol.
(G) Alkyl alkanal, polymer with formaldehyde
and phenol.
(G) Alkanal, polymer with phenol.
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer with ethenylbenzene, ethyl 2propenoate, 2-oxiranylmethyl 2-methyl-2propenoate and 1,2-propanediol mono(2methyl-2-propenoate), reaction products with
diethanolamine, polymers with substitutedalkyl acrylate, formates (salts).
(G) 2-Propenoic acid, 2-methyl, methyl ester,
polymer with ethenylbenzene, ethyl 2propenoate, 2-oxiranylmethyl 2-methyl-2propenoate and 1,2-propanediol mono(2methyl-2-propenoate), reaction products with
diethanolamine, polymers with substitutedalkyl methacrylate, formates (salts).
(G) 2-Propenoic acid, 2-methyl-, methyl ester,
polymer with ethenylbenzene, ethyl 2propenoate, 2-oxiranylmethyl 2-methyl-2propenoate, and 1,2-propanediol mono(2methyl-2-propenoate), reaction products with
diethanolamine, polymers with alkylene glycol monoacrylate, formates (salts).
(S) Undecanol, branched.
(S) 1,4-Cyclohexanedicarboxylic acid, 1,4-bis(2ethylhexyl) ester.
(G) Acrylic acid, tricyclo alkyl ester.
(G) Alkanediol, Substituted alkyl, polymer with
carbomonocyle, alkanedioate substituted
carbomonocycle, ester with substituted
alkanoate.
(G) Methoxy Vinyl Ether- Vinylidene Fluoride
polymer.
(G) Alkenoic acid, alkyl, polymer with
carbomonocyle alkyl propenoate and substituted alkyl alkenoate, ester with substituted
alkyl alkanoate, tert-butyl substituted
peroxoate-initiated.
(G) Polyalkylpolyalkylenepolyamine.
(G) Rosin adduct ester, polymer with polyols,
compd. with ethanolamine.
E:\FR\FM\25SEN1.SGM
25SEN1
60462
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2020 TO 08/31/2020—Continued
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(S) 1,2-Ethanediamine, N,N-dimethyl-N-(1methylethyl)-N-[2-[methyl(1methylethyl)amino]ethyl]-.
(S) Diphosphoric acid, compd. with 1,3,5-triazine-2,4,6-triamine (1:2).
(S) Phosphoric Acid, manganese(2+) salt (2:3).
P–18–0407A ......
4
08/14/2020
CBI ...................................
(S) Polyurethane catalyst ..........................
P–19–0084A ......
4
07/30/2020
CBI ...................................
(S) Flame retardant ...................................
P–19–0141A ......
7
08/24/2020
CBI ...................................
P–19–0147A ......
P–20–0010A ......
5
9
08/17/2020
08/26/2020
CRODA, INC. ...................
CBI ...................................
(S) For use in metal treatment coatings
for lubrication and corrosion protection..
(G) cleaning additive .................................
(G) Polymerization auxiliary ......................
P–20–0025A ......
4
08/05/2020
Biosynthetic Technologies
P–20–0046A ......
4
08/19/2020
CBI ...................................
P–20–0048A ......
4
08/20/2020
CBI ...................................
P–20–0049A ......
4
08/20/2020
CBI ...................................
P–20–0076A ......
3
08/06/2020
CYTEC Industries, Inc .....
P–20–0097A ......
3
08/24/2020
Nelson Brothers, LLC ......
P–20–0100A ......
3
08/19/2020
Evonik Corporation ..........
P–20–0105A ......
2
07/30/2020
Sound Agriculture Company.
P–20–0109 ........
2
08/05/2020
Huntsman Corporation .....
P–20–0133A ......
5
08/03/2020
P–20–0133A ......
6
08/05/2020
P–20–0134A ......
5
08/03/2020
P–20–0134A ......
6
08/05/2020
P–20–0135A ......
5
08/03/2020
P–20–0135A ......
6
08/05/2020
P–20–0143A ......
2
08/05/2020
Huntsman International,
LLC.
Huntsman International,
LLC.
Huntsman International,
LLC.
Huntsman International,
LLC.
Huntsman International,
LLC.
Huntsman International,
LLC.
CBI ...................................
P–20–0146 ........
1
07/30/2020
CBI ...................................
P–20–0152. .......
2
08/03/2020
SHIN–ETSU MICROSI ....
P–20–0153. .......
2
08/04/2020
CBI ...................................
P–20–0154 ........
2
08/04/2020
CBI ...................................
P–20–0155 ........
4
08/13/2020
SHIN–ETSU MICROSI ....
P–20–0155A ......
5
08/20/2020
SHIN–ETSU MICROSI ....
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
PO 00000
Frm 00047
(G) alkoxylated butyl alkyl ester.
(G) Carboxylic acid, reaction products with
metal hydroxide, inorganic dioxide and metal.
(S) Octadecanoic acid, 12-(acetoxy)-, 2ethylhexyl ester.
(S) Motor oil lubricant, formulation #1
(prepared at a processor which is controlled by others) and Motor oil lubricant, formulation #2 (prepared at a
processor which is controlled by others).
(G) Catalyst ............................................... (G) Reaction products of alkyl-terminated
alkylalumuminoxanes and
{[(pentaalkylphenyl-(pentaalkylphenyl)amino)
alkyl]alkanediaminato}bis(aralkyl) transition
metal coordination compound.
(G) Catalyst ............................................... (G) Reaction products of alkyl-terminated
alkylaluminoxanes and dihalogeno(alkylcyclopentadienyl)(tetraalkylcyclopentadienyl)transition metal
coordination compound.
(G) Catalyst ............................................... (G) Reaction products of alkyl-aluminoxanes
and bis(alkylcyclodialkylene)dihalogenozirconium.
(G) Mining chemical .................................. (S) Glycine, reaction products with sodium Oiso-Pr carbonodithioate, sodium salts.
(S) The PMN substance will be used as
(G) Butanedioic acid, monopolyisobutylene
an emulsifier for applications in exploderivs., mixed dihydroxyalkyl and
sives.
hydroxyalkoxyalkyl diesters.
(S) Manual Dish Detergent, Hard Surface
(S) Glycolipids, rhamnose-contg.,
Cleaner, and Laundry Detergent.
Pseudomanas putida-fermented, from D-glucose, potassium salts.
(S) Maltol lactone is a compound that pro- (S) 4H-Pyran-4-one, 3-[(2,5-dihydro-4-methyl-5motes microbial activity in the soil, reoxo-2-furanyl)oxy]-2-methyl-.
sulting in increased availability of phosphorus for crops. This substance will be
used on commercial farming operations.
(S) Exhaust dyeing of cotton and cotton
(G) Acetamide, N-[3-[alkyl(carbomonocyclic)
blends.
substituted]carbomonocycle]-, coupled with
diazotized 2- substituted-3-halo-5nitrobenzonitrile.
(G) component of foam ............................. (G) Fatty acid oil polymer with aliphatic polyols
and aromatic diacid.
(G) component of foam ............................. (G) Fatty acid oil polymer with aliphatic polyols
and aromatic diacid.
(G) component of foam ............................. (G) Aromatic acid, polymer with aliphatic diol
and aromatic diacid.
(G) component of foam ............................. (G) Aromatic acid, polymer with aliphatic diol
and aromatic diacid.
(G) component in foam insulation ............. (G) Fatty acid polymer with polyols, aliphatic alcohol and aromatic diacid.
(G) component in foam insulation ............. (G) Fatty acid polymer with polyols, aliphatic alcohol and aromatic diacid.
(S) Binder for Thermoplastic Coatings,
(S) Cyclohexanemethanamine, 5-amino-1,3,3and Binder or Ink/Adhesive.
trimethyl-, polymer with a-hydro-whydroxypoly(oxy-1,4-butanediyl), 5isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane and 1,1methylenebis[4-isocyanatobenzene].
(G) Insulating material for electrical parts
(G) Alkanoic acid, alkyl, carbopolycyclic alkyl
ester
(G) Contained use for microlithography for (G) Sulfonium, triphenyl-, salt with 2,2-dihalo-2electronic device manufacturing.
sulfoethyl-2-oxo substituted
-heterotricycloalkane-heteropolycyclocarboxylate (1:1)
(G) lubricant additive—dispersant ............. (G) Polyamines, reaction products with succinic
anhydride polyalkenyl derivs., borates.
(G) lubricant additive—dispersant ............. (G) Polyamines, reaction products with succinic
anhydride polyalkenyl derivs., borates.
(G) Contained use for microlithography for (G) Sulfonium, triphenyl-, salt with 5-alkyl- 2electronic device manufacturing.
alkyl- 4-(2,4,6-substituted tri-carbomonocycle,
hetero-acid)benzenesulfonate (1:1).
(G) Contained use for microlithography for (G) Sulfonium, triphenyl-, salt with 5-alkyl- 2electronic device manufacturing.
alkyl- 4-(2,4,6-substituted tri-carbomonocycle,
hetero-acid)benzenesulfonate (1:1).
Fmt 4703
Sfmt 4703
E:\FR\FM\25SEN1.SGM
25SEN1
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
60463
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2020 TO 08/31/2020—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–20–0156 ........
1
08/03/2020
CBI ...................................
(G) Photolithography .................................
P–20–0157 ........
1
08/05/2020
CBI ...................................
P–20–0158 ........
1
08/06/2020
AkzoNobel ........................
(G) The notified substance will be used as
a fragrance ingredient.
(S) External coating for food and beverage cans.
P–20–0159 ........
2
08/11/2020
SHIN–ETSU MICROSI ....
P–20–0159A ......
3
08/20/2020
SHIN–ETSU MICROSI ....
P–20–0160 ........
2
08/11/2020
Designer Molecules, Inc.
P–20–0161 ........
1
08/18/2020
Sirrus, Inc .........................
P–20–0163 ........
1
08/21/2020
P–20–0164 ........
1
08/21/2020
P–20–0165 ........
1
08/21/2020
Innovative Chemical
Technologies, Inc.
Innovative Chemical
Technologies, Inc.
Innovative Chemical
Technologies, Inc.
(G) Substituted, triaryl-, tricycloalkane alkyl
disubstituted.
(G) bis(cycloalkyl-alkyl)ether.
(G) Carbomonocyclic diacid, polymer with 2,2dimethyl-1,3-propanediol, alkanetriol,
hexanedioic acid and 1,3isobenzofurandione, compd. with 2(dimethylamino)ethanol.
(G) Contained use for microlithography for (G) Phenoxathiinium, 10-phenyl, 5-alkyl-2-alkylelectronic device manufacturing.
4-(2,4,6-substituted tri-carbomonocycle,
hetero-acid)benzenesulfonate (1:1).
(G) Contained use for microlithography for (G) Phenoxathiinium, 10-phenyl, 5-alkyl-2-alkylelectronic device manufacturing.
4-(2,4,6-substituted tri-carbomonocycle,
hetero-acid)benzenesulfonate (1:1).
(G) Dielectric film forming material for use (S) Amines, C–36-alkylenedi-, polymers with
in microelectronic assembly applications.
bicyclo[2.2.1]heptanedimethanamine, [5,5′biisobenzofuran]-1,1′,3,3′-tetrone and
3a,4,4a,7a, 8,8a-hexahydro-4, 8-etheno1H,3H-benzo[1,2-c:4, 5-c′]difuran-1,3,5, 7tetrone, maleated.
(S) Film former or crosslinker additive
(S) Propanedioic acid, 2-methylene-, 1,3-diethyl
used in coatings and adhesives, and
ester, polymer with 1,4-butanediol.
Crosslinker additive used in waterborne
emulsions.
(G) Contained chemical processing .......... (S) Butanedioic acid, 2-methylene-, 4-octadecyl
ester.
(G) Contained chemical processing .......... (S) Butanedioic acid, 2-methylene-, 4-docosyl
ester.
(G) Contained chemical processing .......... (S) Butanedioic acid, 2-methylene-, 4–C16–18alkyl esters.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 08/01/2020 TO 08/31/2020
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Received date
Commencement
date
If amendment,
type of
amendment
P–12–0299 .........
P–16–0232 .........
08/19/2020
08/10/2020
06/18/2020
08/07/2020
N
N
P–16–0419
P–16–0423
P–17–0086
P–17–0086
P–17–0086
P–17–0206
P–18–0031
.........
.........
.........
.........
.........
.........
.........
08/04/2020
08/04/2020
08/10/2020
08/10/2020
08/10/2020
07/30/2020
07/31/2020
07/07/2020
07/14/2020
07/31/2020
07/31/2020
07/31/2020
07/30/2020
07/22/2020
N
N
N
N
N
N
N
P–18–0151 .........
08/26/2020
04/01/2018
N
P–18–0199 .........
P–18–0263 .........
08/10/2020
08/04/2020
07/21/2020
07/28/2020
N
N
P–18–0381
P–19–0153
P–19–0174
P–20–0057
P–20–0086
07/30/2020
08/06/2020
08/12/2020
08/24/2020
08/21/2020
07/29/2020
08/06/2020
08/10/2020
08/11/2020
07/31/2020
N
N
N
N
N
.........
.........
.........
.........
.........
Chemical substance
(S) Propanedioic acid, 2-methylene-, 1,3-diethyl ester.
(G) Zinc, bis[2-(hydroxyl-kO)benzoato-kO]-,(T–4)-, ar, ar’-bis(alkyl)
derivs.
(G) N-alkyl-dialkylpiperidine.
(G) Tetraalkylpiperidinium halide.
(S) Cyclohexane, 1,4-bis(ethoxymethyl)-, trans-.
(S) Cyclohexane, 1,4-bis(ethoxymethyl)-, cis-.
(S) Cyclohexane, 1,4-bis(ethoxymethyl)-.
(G) Imino alkane amine phosphate.
(S) 1, 3-benzenedicarboxylic acid, polymer with 1,3-butanediol, 2,2dimethyl-1,3-propanediol and 2-ethyl-2-(hydroxymethyl)-1,3propanediol.
(S) Formaldehyde, reaction product with 1,3-benzenedimethanamine
and p-tert-butylphenol.
(G) Rare earth oxide.
(G) Mixed alkyl esters-, polymer with n1-(2-aminoethyl)- l,2ethanediamine, aziridine, n-acetyl derivs., acetates (salts),.
(S) Indium manganese yttrium oxide.
(G) Dibromoalkyl ether tetrabromobisphenol a.
(S) Octadecanoic acid, (alkylphosphinyl), polyol ester.
(G) Arene, trimethoxysilyl-, hydrolyzed.
(G) 2-oxepanone, homopolymer, ester with hydroxyalkyl trioxo
heteromonocyclic (3:1).
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
PO 00000
Frm 00048
Fmt 4703
Sfmt 4703
E:\FR\FM\25SEN1.SGM
25SEN1
60464
Federal Register / Vol. 85, No. 187 / Friday, September 25, 2020 / Notices
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 08/01/2020 TO 08/31/2020
Case No.
Received date
Type of test information
Chemical substance
L–20–0140 ...
08/11/2020
Particle Size Distribution Report, Dust Explosivity Test
P–16–0463 ..
P–16–0543 ..
P–19–0098 ..
08/27/2020
08/24/2020
08/27/2020
P–20–0066 ..
08/07/2020
Metals Analysis Report .................................................
Exposure Monitoring Report .........................................
Ready Biodegradability Modified Sturm Test (OECD
Test Guideline 301).
Toxicity Study by Oral Administration to Han Wistar
Rats for 4 Weeks Followed by a 2 Week Recovery
Period.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
(G) Arylfurandione, [bis(trihaloalkyl)alkylidene]bis-,
polymer with alkanediamine.
(G) Silane-treated aluminosilicate.
(G) Halogenophosphoric acid metal salt.
(G) Phosphoric acid, polymer with (hydroxyalkyl)alkanediol and alkanediol.
(G) 2-propenoic acid, 2-hydroxyethyl ester, reaction
products with dialkyl hydrogen heterosubstituted
phosphate and dimethyl phosphonate.
President for External Engagement 202–
565–3216.
Joyce B. Stone,
Assistant Corporate Secretary.
[FR Doc. 2020–21182 Filed 9–23–20; 11:15 am]
BILLING CODE 6690–01–P
Authority: 15 U.S.C. 2601 et seq.
Dated: September 16, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
FEDERAL COMMUNICATIONS
COMMISSION
[OMB 3060–1250; FRS 17095]
Information Collection Being Reviewed
by the Federal Communications
Commission
[FR Doc. 2020–21198 Filed 9–24–20; 8:45 am]
BILLING CODE 6560–50–P
Federal Communications
Commission.
ACTION: Notice and request for
comments.
AGENCY:
EXPORT-IMPORT BANK
khammond on DSKJM1Z7X2PROD with NOTICES
Sunshine Act Meetings
Notice of Open Meeting of the
Advisory Committee of the ExportImport Bank of the United States
(EXIM).
TIME AND DATE: Tuesday, September 29,
2020 from 1:00–4:00 p.m. EDT.
PLACE: The meeting will be held via
teleconference and audio-only webinar.
STATUS: Public Participation: The
meeting will be open to public
participation and time will be allotted
for questions or comments submitted
online. Members of the public may also
file written statements before or after the
meeting to external@exim.gov.
Interested parties may register for the
meeting at https://
register.gotowebinar.com/register/
4591529081381306894.
MATTERS TO BE CONSIDERED: Discussion
of EXIM policies and programs to
provide competitive financing to
expand United States exports.
CONTACT PERSON FOR MORE INFORMATION:
For further information, contact Brittany
J. Walker, Deputy to the Senior Vice
VerDate Sep<11>2014
18:25 Sep 24, 2020
Jkt 250001
As part of its continuing effort
to reduce paperwork burdens, and as
required by the Paperwork Reduction
Act of 1995 (PRA), the Federal
Communications Commission (FCC or
Commission) invites the general public
and other Federal agencies to take this
opportunity to comment on the
following information collections.
Comments are requested concerning:
Whether the proposed collection of
information is necessary for the proper
performance of the functions of the
Commission, including whether the
information shall have practical utility;
the accuracy of the Commission’s
burden estimate; ways to enhance the
quality, utility, and clarity of the
information collected; ways to minimize
the burden of the collection of
information on the respondents,
including the use of automated
collection techniques or other forms of
information technology; and ways to
further reduce the information
collection burden on small business
concerns with fewer than 25 employees.
SUMMARY:
PO 00000
Frm 00049
Fmt 4703
Sfmt 4703
The FCC may not conduct or sponsor
a collection of information unless it
displays a currently valid Office of
Management and Budget (OMB) control
number. No person shall be subject to
any penalty for failing to comply with
a collection of information subject to the
PRA that does not display a valid OMB
control number.
DATES: Written PRA comments should
be submitted on or before November 24,
2020. If you anticipate that you will be
submitting comments, but find it
difficult to do so within the period of
time allowed by this notice, you should
advise the contact listed below as soon
as possible.
ADDRESSES: Direct all PRA comments to
Nicole Ongele, FCC, via email PRA@
fcc.gov and to Nicole.Ongele@fcc.gov.
FOR FURTHER INFORMATION CONTACT: For
additional information about the
information collection, contact Nicole
Ongele, (202) 418–2991.
SUPPLEMENTARY INFORMATION:
OMB Control Number: 3060–1250.
Title: Sections 15.37(k), 74.851(k), and
74.851(l), Consumer Disclosure and
Labeling.
Form No.: N/A.
Type of Review: Revision of a
currently approved collection.
Respondents: Individuals or
households, Business or other for-profit,
and Not-for-profit institutions.
Number of Respondents and
Responses: 100 respondents; 2,250
responses.
Estimated Time per Response: 0.25
hours.
Frequency of Response: Third party
disclosure requirement (disclosure and
labeling requirement).
Obligation to Respond: Required to
obtain or retain benefits. Statutory
authority for this collection of
information is contained in 47 U.S.C.
151, 154(i), 154(j), 301, 302a, 303(f),
303(g), and 303(r).
E:\FR\FM\25SEN1.SGM
25SEN1
]]>Agencies
[Federal Register Volume 85, Number 187 (Friday, September 25, 2020)]
[Notices]
[Pages 60459-60464]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-21198]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10014-64]
Certain New Chemicals; Receipt and Status Information for August
2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 08/01/
2020 to 08/31/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before October 26, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Due to the public health concerns related to COVID-19, the EPA
Docket
[[Page 60460]]
Center (EPA/DC) and Reading Room is closed to visitors with limited
exceptions. The staff continues to provide remote customer service via
email, phone, and webform. For the latest status information on EPA/DC
services and docket access, visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 08/01/2020 to 08/31/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case
[[Page 60461]]
number assigned to the notice that indicates whether the submission is
an initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 08/01/2020 to 08/31/2020
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0345A........... 6 08/09/2020 CBI................. (G) Processing aid... (G) Acrylamide,
polymer with
methacrylic acid
derivatives.
P-16-0420A........... 3 07/31/2020 CBI................. (S) The notified (G) Dimethyl
substance will be cyclohexenyl
used as a fragrance propanol.
ingredient, being
blended (mixed) with
other fragrance
ingredients to make
fragrance oils that
will be sold to
industrial and
commercial customers
for their
incorporation into
soaps, detergents,
cleaners and other
similar household
and consumer
products.
P-17-0115A........... 5 08/25/2020 CBI................. (S) An adhesion (G) Aminoalkyl
promoter for coating alkoxysilane.
formulations.
P-17-0281A........... 7 08/05/2020 CBI................. (G) Water reducible (G) Polysiloxane-
resin. polyester polyol
carboxylate.
P-18-0065A........... 2 08/17/2020 Evonik Corporation.. (S) Absorption agent (S) 1,3-
and lab reagent. Propanediamine, N1,N1-
dimethyl-N3-(2,2,6,6-
tetramethyl-4-
piperidinyl)-.
P-18-0202A........... 7 08/06/2020 Hexion, Inc......... (G) Rubber additive (G) Trialkyl alkanal,
and Tackifier polymer with phenol.
additives.
P-18-0203A........... 7 08/06/2020 Hexion, Inc......... (G) Rubber additive (G) Trialkyl alkanal,
and Tackifier polymer with
additives. alkylalkanal and
phenol.
P-18-0204A........... 7 08/06/2020 Hexion, Inc......... (G) Rubber additive (G) Alkyl alkanal,
and Tackifier polymer with phenol.
additive.
P-18-0205A........... 7 08/06/2020 Hexion, Inc......... (G) Tackifier (G) Alkyl alkanal,
additive. polymer with
formaldehyde and
phenol.
P-18-0206A........... 7 08/06/2020 Hexion, Inc......... (G) Rubber additive (G) Alkanal, polymer
and Tackifier with phenol.
additive.
P-18-0241A........... 5 07/31/2020 CBI................. (G) Additive for (G) 2-Propenoic acid,
automotive coating. 2-methyl-, methyl
ester, polymer with
ethenylbenzene, ethyl
2-propenoate, 2-
oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), reaction
products with
diethanolamine,
polymers with
substituted-alkyl
acrylate, formates
(salts).
P-18-0244A........... 5 07/31/2020 CBI................. (G) Additive for (G) 2-Propenoic acid,
automotive coating. 2-methyl, methyl
ester, polymer with
ethenylbenzene, ethyl
2-propenoate, 2-
oxiranylmethyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), reaction
products with
diethanolamine,
polymers with
substituted-alkyl
methacrylate,
formates (salts).
P-18-0245A........... 5 07/31/2020 CBI................. (G) Additive for (G) 2-Propenoic acid,
automotive coating. 2-methyl-, methyl
ester, polymer with
ethenylbenzene, ethyl
2-propenoate, 2-
oxiranylmethyl 2-
methyl-2-propenoate,
and 1,2-propanediol
mono(2-methyl-2-
propenoate), reaction
products with
diethanolamine,
polymers with
alkylene glycol
monoacrylate,
formates (salts).
P-18-0256A........... 6 08/18/2020 CBI................. (G) Chemical (S) Undecanol,
intermediate. branched.
P-18-0273A........... 6 08/14/2020 CBI................. (G) Used in polymer (S) 1,4-
manufacturing. Cyclohexanedicarboxyl
ic acid, 1,4-bis(2-
ethylhexyl) ester.
P-18-0351A........... 3 08/19/2020 CBI................. (G) UV curable inks.. (G) Acrylic acid,
tricyclo alkyl ester.
P-18-0355A........... 4 08/03/2020 CBI................. (G) Paint............ (G) Alkanediol,
Substituted alkyl,
polymer with
carbomonocyle,
alkanedioate
substituted
carbomonocycle, ester
with substituted
alkanoate.
P-18-0359A........... 4 08/18/2020 CBI................. (G) Molded or (G) Methoxy Vinyl
extruded items. Ether- Vinylidene
Fluoride polymer.
P-18-0396A........... 5 08/17/2020 CBI................. (G) Paint............ (G) Alkenoic acid,
alkyl, polymer with
carbomonocyle alkyl
propenoate and
substituted alkyl
alkenoate, ester with
substituted alkyl
alkanoate, tert-butyl
substituted peroxoate-
initiated.
P-18-0398A........... 6 07/31/2020 EVONIK Corporation.. (S) Intermediate..... (G)
Polyalkylpolyalkylene
polyamine.
P-18-0399A........... 8 08/14/2020 CBI................. (G) (c) open, non- (G) Rosin adduct
dispersive use ester, polymer with
additive for polyols, compd. with
industrial use only. ethanolamine.
[[Page 60462]]
P-18-0407A........... 4 08/14/2020 CBI................. (S) Polyurethane (S) 1,2-Ethanediamine,
catalyst. N,N-dimethyl-N-(1-
methylethyl)-N-[2-
[methyl(1-
methylethyl)amino]eth
yl]-.
P-19-0084A........... 4 07/30/2020 CBI................. (S) Flame retardant.. (S) Diphosphoric acid,
compd. with 1,3,5-
triazine-2,4,6-
triamine (1:2).
P-19-0141A........... 7 08/24/2020 CBI................. (S) For use in metal (S) Phosphoric Acid,
treatment coatings manganese(2+) salt
for lubrication and (2:3).
corrosion
protection..
P-19-0147A........... 5 08/17/2020 CRODA, INC.......... (G) cleaning additive (G) alkoxylated butyl
alkyl ester.
P-20-0010A........... 9 08/26/2020 CBI................. (G) Polymerization (G) Carboxylic acid,
auxiliary. reaction products
with metal hydroxide,
inorganic dioxide and
metal.
P-20-0025A........... 4 08/05/2020 Biosynthetic (S) Motor oil (S) Octadecanoic acid,
Technologies. lubricant, 12-(acetoxy)-, 2-
formulation #1 ethylhexyl ester.
(prepared at a
processor which is
controlled by
others) and Motor
oil lubricant,
formulation #2
(prepared at a
processor which is
controlled by
others).
P-20-0046A........... 4 08/19/2020 CBI................. (G) Catalyst......... (G) Reaction products
of alkyl-terminated
alkylalumuminoxanes
and
{[(pentaalkylphenyl-
(pentaalkylphenyl)ami
no)alkyl]alkanediamin
ato{time} bis(aralkyl
) transition metal
coordination
compound.
P-20-0048A........... 4 08/20/2020 CBI................. (G) Catalyst......... (G) Reaction products
of alkyl-terminated
alkylaluminoxanes and
dihalogeno-
(alkylcyclopentadieny
l)(tetraalkylcyclopen
tadienyl)transition
metal coordination
compound.
P-20-0049A........... 4 08/20/2020 CBI................. (G) Catalyst......... (G) Reaction products
of alkyl-aluminoxanes
and bis-
(alkylcyclodialkylene
)dihalogenozirconium.
P-20-0076A........... 3 08/06/2020 CYTEC Industries, (G) Mining chemical.. (S) Glycine, reaction
Inc. products with sodium
O-iso-Pr
carbonodithioate,
sodium salts.
P-20-0097A........... 3 08/24/2020 Nelson Brothers, LLC (S) The PMN substance (G) Butanedioic acid,
will be used as an monopolyisobutylene
emulsifier for derivs., mixed
applications in dihydroxyalkyl and
explosives. hydroxyalkoxyalkyl
diesters.
P-20-0100A........... 3 08/19/2020 Evonik Corporation.. (S) Manual Dish (S) Glycolipids,
Detergent, Hard rhamnose-contg.,
Surface Cleaner, and Pseudomanas putida-
Laundry Detergent. fermented, from D-
glucose, potassium
salts.
P-20-0105A........... 2 07/30/2020 Sound Agriculture (S) Maltol lactone is (S) 4H-Pyran-4-one, 3-
Company. a compound that [(2,5-dihydro-4-
promotes microbial methyl-5-oxo-2-
activity in the furanyl)oxy]-2-methyl-
soil, resulting in .
increased
availability of
phosphorus for
crops. This
substance will be
used on commercial
farming operations.
P-20-0109............ 2 08/05/2020 Huntsman Corporation (S) Exhaust dyeing of (G) Acetamide, N-[3-
cotton and cotton [alkyl(carbomonocycli
blends. c)
substituted]carbomono
cycle]-, coupled with
diazotized 2-
substituted-3-halo-5-
nitrobenzonitrile.
P-20-0133A........... 5 08/03/2020 Huntsman (G) component of foam (G) Fatty acid oil
International, LLC. polymer with
aliphatic polyols and
aromatic diacid.
P-20-0133A........... 6 08/05/2020 Huntsman (G) component of foam (G) Fatty acid oil
International, LLC. polymer with
aliphatic polyols and
aromatic diacid.
P-20-0134A........... 5 08/03/2020 Huntsman (G) component of foam (G) Aromatic acid,
International, LLC. polymer with
aliphatic diol and
aromatic diacid.
P-20-0134A........... 6 08/05/2020 Huntsman (G) component of foam (G) Aromatic acid,
International, LLC. polymer with
aliphatic diol and
aromatic diacid.
P-20-0135A........... 5 08/03/2020 Huntsman (G) component in foam (G) Fatty acid polymer
International, LLC. insulation. with polyols,
aliphatic alcohol and
aromatic diacid.
P-20-0135A........... 6 08/05/2020 Huntsman (G) component in foam (G) Fatty acid polymer
International, LLC. insulation. with polyols,
aliphatic alcohol and
aromatic diacid.
P-20-0143A........... 2 08/05/2020 CBI................. (S) Binder for (S)
Thermoplastic Cyclohexanemethanamin
Coatings, and Binder e, 5-amino-1,3,3-
or Ink/Adhesive. trimethyl-, polymer
with a-hydro-w-
hydroxypoly(oxy-1,4-
butanediyl), 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
and 1,1-
methylenebis[4-
isocyanatobenzene].
P-20-0146............ 1 07/30/2020 CBI................. (G) Insulating (G) Alkanoic acid,
material for alkyl,
electrical parts. carbopolycyclic alkyl
ester
P-20-0152............ 2 08/03/2020 SHIN-ETSU MICROSI... (G) Contained use for (G) Sulfonium,
microlithography for triphenyl-, salt with
electronic device 2,2-dihalo-2-
manufacturing. sulfoethyl-2-oxo
substituted -
heterotricycloalkane-
heteropolycyclo-
carboxylate (1:1)
P-20-0153............ 2 08/04/2020 CBI................. (G) lubricant (G) Polyamines,
additive--dispersant. reaction products
with succinic
anhydride polyalkenyl
derivs., borates.
P-20-0154............ 2 08/04/2020 CBI................. (G) lubricant (G) Polyamines,
additive--dispersant. reaction products
with succinic
anhydride polyalkenyl
derivs., borates.
P-20-0155............ 4 08/13/2020 SHIN-ETSU MICROSI... (G) Contained use for (G) Sulfonium,
microlithography for triphenyl-, salt with
electronic device 5-alkyl- 2-alkyl- 4-
manufacturing. (2,4,6-substituted
tri-carbomonocycle,
hetero-
acid)benzenesulfonate
(1:1).
P-20-0155A........... 5 08/20/2020 SHIN-ETSU MICROSI... (G) Contained use for (G) Sulfonium,
microlithography for triphenyl-, salt with
electronic device 5-alkyl- 2-alkyl- 4-
manufacturing. (2,4,6-substituted
tri-carbomonocycle,
hetero-
acid)benzenesulfonate
(1:1).
[[Page 60463]]
P-20-0156............ 1 08/03/2020 CBI................. (G) Photolithography. (G) Substituted,
triaryl-,
tricycloalkane alkyl
disubstituted.
P-20-0157............ 1 08/05/2020 CBI................. (G) The notified (G) bis(cycloalkyl-
substance will be alkyl)ether.
used as a fragrance
ingredient.
P-20-0158............ 1 08/06/2020 AkzoNobel........... (S) External coating (G) Carbomonocyclic
for food and diacid, polymer with
beverage cans. 2,2-dimethyl-1,3-
propanediol,
alkanetriol,
hexanedioic acid and
1,3-
isobenzofurandione,
compd. with 2-
(dimethylamino)ethano
l.
P-20-0159............ 2 08/11/2020 SHIN-ETSU MICROSI... (G) Contained use for (G) Phenoxathiinium,
microlithography for 10-phenyl, 5-alkyl-2-
electronic device alkyl-4-(2,4,6-
manufacturing. substituted tri-
carbomonocycle,
hetero-
acid)benzenesulfonate
(1:1).
P-20-0159A........... 3 08/20/2020 SHIN-ETSU MICROSI... (G) Contained use for (G) Phenoxathiinium,
microlithography for 10-phenyl, 5-alkyl-2-
electronic device alkyl-4-(2,4,6-
manufacturing. substituted tri-
carbomonocycle,
hetero-
acid)benzenesulfonate
(1:1).
P-20-0160............ 2 08/11/2020 Designer Molecules, (G) Dielectric film (S) Amines, C-36-
Inc.. forming material for alkylenedi-, polymers
use in with
microelectronic bicyclo[2.2.1]heptane
assembly dimethanamine, [5,5'-
applications. biisobenzofuran]-
1,1',3,3'-tetrone and
3a,4,4a,7a, 8,8a-
hexahydro-4, 8-etheno-
1H,3H-benzo[1,2-c:4,
5-c']difuran-1,3,5, 7-
tetrone, maleated.
P-20-0161............ 1 08/18/2020 Sirrus, Inc......... (S) Film former or (S) Propanedioic acid,
crosslinker additive 2-methylene-, 1,3-
used in coatings and diethyl ester,
adhesives, and polymer with 1,4-
Crosslinker additive butanediol.
used in waterborne
emulsions.
P-20-0163............ 1 08/21/2020 Innovative Chemical (G) Contained (S) Butanedioic acid,
Technologies, Inc. chemical processing. 2-methylene-, 4-
octadecyl ester.
P-20-0164............ 1 08/21/2020 Innovative Chemical (G) Contained (S) Butanedioic acid,
Technologies, Inc. chemical processing. 2-methylene-, 4-
docosyl ester.
P-20-0165............ 1 08/21/2020 Innovative Chemical (G) Contained (S) Butanedioic acid,
Technologies, Inc. chemical processing. 2-methylene-, 4-C16-
18-alkyl esters.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 08/01/2020 to 08/31/2020
----------------------------------------------------------------------------------------------------------------
If amendment, type
Case No. Received date Commencement date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-12-0299...................... 08/19/2020 06/18/2020 N (S) Propanedioic acid,
2-methylene-, 1,3-
diethyl ester.
P-16-0232...................... 08/10/2020 08/07/2020 N (G) Zinc, bis[2-
(hydroxyl-kO)benzoato-
kO]-,(T-4)-, ar, ar'-
bis(alkyl) derivs.
P-16-0419...................... 08/04/2020 07/07/2020 N (G) N-alkyl-
dialkylpiperidine.
P-16-0423...................... 08/04/2020 07/14/2020 N (G)
Tetraalkylpiperidiniu
m halide.
P-17-0086...................... 08/10/2020 07/31/2020 N (S) Cyclohexane, 1,4-
bis(ethoxymethyl)-,
trans-.
P-17-0086...................... 08/10/2020 07/31/2020 N (S) Cyclohexane, 1,4-
bis(ethoxymethyl)-,
cis-.
P-17-0086...................... 08/10/2020 07/31/2020 N (S) Cyclohexane, 1,4-
bis(ethoxymethyl)-.
P-17-0206...................... 07/30/2020 07/30/2020 N (G) Imino alkane amine
phosphate.
P-18-0031...................... 07/31/2020 07/22/2020 N (S) 1, 3-
benzenedicarboxylic
acid, polymer with
1,3-butanediol, 2,2-
dimethyl-1,3-
propanediol and 2-
ethyl-2-
(hydroxymethyl)-1,3-
propanediol.
P-18-0151...................... 08/26/2020 04/01/2018 N (S) Formaldehyde,
reaction product with
1,3-
benzenedimethanamine
and p-tert-
butylphenol.
P-18-0199...................... 08/10/2020 07/21/2020 N (G) Rare earth oxide.
P-18-0263...................... 08/04/2020 07/28/2020 N (G) Mixed alkyl esters-
, polymer with n1-(2-
aminoethyl)- l,2-
ethanediamine,
aziridine, n-acetyl
derivs., acetates
(salts),.
P-18-0381...................... 07/30/2020 07/29/2020 N (S) Indium manganese
yttrium oxide.
P-19-0153...................... 08/06/2020 08/06/2020 N (G) Dibromoalkyl ether
tetrabromobisphenol
a.
P-19-0174...................... 08/12/2020 08/10/2020 N (S) Octadecanoic acid,
(alkylphosphinyl),
polyol ester.
P-20-0057...................... 08/24/2020 08/11/2020 N (G) Arene,
trimethoxysilyl-,
hydrolyzed.
P-20-0086...................... 08/21/2020 07/31/2020 N (G) 2-oxepanone,
homopolymer, ester
with hydroxyalkyl
trioxo
heteromonocyclic
(3:1).
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
[[Page 60464]]
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 08/01/2020 to 08/31/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-20-0140........................... 08/11/2020 Particle Size Distribution (G) Arylfurandione,
Report, Dust Explosivity [bis(trihaloalkyl)alkyliden
Test. e]bis-, polymer with
alkanediamine.
P-16-0463........................... 08/27/2020 Metals Analysis Report...... (G) Silane-treated
aluminosilicate.
P-16-0543........................... 08/24/2020 Exposure Monitoring Report.. (G) Halogenophosphoric acid
metal salt.
P-19-0098........................... 08/27/2020 Ready Biodegradability (G) Phosphoric acid, polymer
Modified Sturm Test (OECD with (hydroxyalkyl)-
Test Guideline 301). alkanediol and alkanediol.
P-20-0066........................... 08/07/2020 Toxicity Study by Oral (G) 2-propenoic acid, 2-
Administration to Han hydroxyethyl ester,
Wistar Rats for 4 Weeks reaction products with
Followed by a 2 Week dialkyl hydrogen
Recovery Period. heterosubstituted phosphate
and dimethyl phosphonate.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 16, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-21198 Filed 9-24-20; 8:45 am]
BILLING CODE 6560-50-P
