Airworthiness Directives; Airbus SAS Airplanes, 45350-45352 [2020-16170]

Download as PDF 45350 Federal Register / Vol. 85, No. 145 / Tuesday, July 28, 2020 / Proposed Rules flap torque tube actuator attachment bracket for cracks in accordance with steps 4A(1) through (3) of Air Tractor SL #347, Rev A. If there is a crack, before further flight, replace the flap torque tube with a flap torque tube that has zero hours TIS. (3) Replacing a flap torque tube does not terminate the repetitive visual inspections or dye penetrant inspections required by this AD. (h) Alternative Methods of Compliance (AMOCs) (1) The Manager, of the Fort Worth ACO Branch, AIR–7F0, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, sent it to the attention of: Kenneth A. Cook, Aerospace Engineer, Fort Worth ACO Branch, AIR–7F0, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; phone: 817– 222–5475; email: kenneth.a.cook@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector (PI), or lacking a PI, your local Flight Standards District Office. (i) Related Information For more information about this AD, contact Kenneth A. Cook, Aerospace Engineer, Fort Worth ACO Branch, AIR–7F0, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; phone: 817–222–5475; email: kenneth.a.cook@faa.gov. Issued on July 22, 2020. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–16209 Filed 7–27–20; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2020–0673; Product Identifier 2020–NM–076–AD] RIN 2120–AA64 Airworthiness Directives; Airbus SAS Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). khammond on DSKJM1Z7X2PROD with PROPOSALS AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330–200 series, Model A330–200 Freighter series, Model A330–300 series, Model A330– 900 series, Model A340–200 series, Model A340–300 series, Model A340– 500 series, Model A340–600 series, Model A380–800 series airplanes; and SUMMARY: VerDate Sep<11>2014 16:17 Jul 27, 2020 Jkt 250001 Model A350–941 and –1041 airplanes. This proposed AD was prompted by a report of a quality issue with a certain repair method of damage-through honeycomb core cargo linings by speed patches applied to both sides. This proposed AD would require a detailed inspection of each affected part and, depending on findings, repair of each affected part, or replacement with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by September 11, 2020. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: ADs@easa.europa.eu; internet: www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0673. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0673; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. PO 00000 Frm 00006 Fmt 4702 Sfmt 4702 Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; phone and fax: 206–231–3225; email: dan.rodina@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2020–0673; Product Identifier 2020–NM–076–AD’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this NPRM based on those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments the FAA receives, without change, to https://www.regulations.gov, including any personal information you provide. The FAA will also post a report summarizing each substantive verbal contact the FAA receives about this NPRM. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to the person identified in the FOR FURTHER INFORMATION CONTACT section. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. E:\FR\FM\28JYP1.SGM 28JYP1 45351 Federal Register / Vol. 85, No. 145 / Tuesday, July 28, 2020 / Proposed Rules Discussion The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020–0100, dated May 5, 2020 (‘‘EASA AD 2020–0100’’) (also referred to as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct an unsafe condition for all Airbus SAS Model A330–200 series, Model A330– 200 Freighter series, Model A330–300 series, Model A330–900 series, Model A340–200 series, Model A340–300 series, Model A340–500 series, Model A340–600 series, Model A380–800 series airplanes; and Model A350–941 and –1041 airplanes. This proposed AD was prompted by a report of a quality issue with a certain repair method (known as Speedpatch AF800) of damage-through honeycomb core cargo linings by speed patches applied to both sides. Speedpatch AF800 is not compliant with the flame penetration tests. The FAA is proposing this AD to address reduced ability of repaired linings to contain smoke or fire, resulting in an increased risk of an uncontained fire in the cargo compartment and consequent structural damage to the airplane. See the MCAI for additional background information. Related IBR Material Under 1 CFR Part 51 EASA AD 2020–0100, dated May 5, 2020, describes procedures for a detailed inspection of each affected part and, depending on findings, repair of each affected part, or replacement with a serviceable part. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. FAA’s Determination and Requirements of This Proposed AD This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, the FAA has been notified of the unsafe condition described in the MCAI referenced above. The FAA is proposing this AD because the FAA evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop in other products of the same type design. Proposed AD Requirements This proposed AD would require accomplishing the actions specified in EASA AD 2020–0100 described previously, as incorporated by reference, except for any differences identified as exceptions in the regulatory text of this AD. Explanation of Required Compliance Information In the FAA’s ongoing efforts to improve the efficiency of the AD process, the FAA initially worked with Airbus and EASA to develop a process to use certain EASA ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has since coordinated with other manufacturers and civil aviation authorities (CAAs) to use this process. As a result, EASA AD 2020–0100 will be incorporated by reference in the FAA final rule. This proposed AD would, therefore, require compliance with EASA AD 2020–0100 in its entirety, through that incorporation, except for any differences identified as exceptions in the regulatory text of this proposed AD. Using common terms that are the same as the heading of a particular section in the EASA AD does not mean that operators need comply only with that section. For example, where the AD requirement refers to ‘‘all required actions and compliance times,’’ compliance with this AD requirement is not limited to the section titled ‘‘Required Action(s) and Compliance Time(s)’’ in the EASA AD. Service information specified in EASA AD 2020–0100 that is required for compliance with EASA AD 2020–0100 will be available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2020–0673 after the FAA final rule is published. Costs of Compliance The FAA estimates that this proposed AD affects 127 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS FOR REQUIRED ACTIONS Labor cost 20 work-hours × $85 per hour = $1,700 ..................................................................................... The FAA estimates the following costs to do any necessary on-condition repairs that would be required based on Cost per product Parts cost the results of any required actions. The FAA has no way of determining the $0 Cost on U.S. operators $1,700 $215,900 number of aircraft that might need these on-condition repairs: ESTIMATED COSTS OF ON-CONDITION ACTIONS Labor cost 2 work-hours × $85 per hour = $170 ...................................................................................................................... khammond on DSKJM1Z7X2PROD with PROPOSALS Cost per product Parts cost * $170 * The FAA has received no definitive data that would enable us to provide cost estimates for the parts required for the on-condition repairs specified in this proposed AD. The FAA has received no definitive data that would enable us to provide cost estimates for the on-condition replacements specified in this proposed AD. VerDate Sep<11>2014 16:17 Jul 27, 2020 Jkt 250001 Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: PO 00000 Frm 00007 Fmt 4702 Sfmt 4702 Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section E:\FR\FM\28JYP1.SGM 28JYP1 45352 Federal Register / Vol. 85, No. 145 / Tuesday, July 28, 2020 / Proposed Rules 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: 1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): khammond on DSKJM1Z7X2PROD with PROPOSALS ■ Airbus SAS: Docket No. FAA–2020–0673; Product Identifier 2020–NM–076–AD. The FAA must receive comments by September 11, 2020. VerDate Sep<11>2014 16:17 Jul 27, 2020 Jkt 250001 (c) Applicability This AD applies to all the Airbus SAS airplanes identified in paragraphs (c)(1) through (10), certificated in any category. (1) Model A330–201, –202, –203, –223, and –243 airplanes. (2) Model A330–223F and –243F airplanes. (3) Model A330–301, –302, –303, –321, –322, –323, –341, –342, and –343 airplanes. (4) Model A330–941 airplanes. (5) Model A340–211, –212, and –213 airplanes. (6) Model A340–311, –312, and –313 airplanes. (7) Model A340–541 airplanes. (8) Model A340–642 airplanes. (9) Model A350–941 and –1041 airplanes. (10) Model A380–841, –842, and –861 airplanes. (d) Subject Air Transport Association (ATA) of America Code 25, Equipment/furnishings. (e) Reason This AD was prompted by a report of a quality issue with a certain repair method of damage-through honeycomb core cargo linings by speed patches applied to both sides. The FAA is issuing this AD to address reduced ability of repaired linings to contain smoke or fire, resulting in an increased risk of an uncontained fire in the cargo compartment and consequent structural damage to the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020–0100, dated May 5, 2020 (‘‘EASA AD 2020–0100’’). (1) Where EASA AD 2020–0100 refers to its effective date, this AD requires using the effective date of this AD. (2) The ‘‘Remarks’’ section of EASA AD 2020–0100 does not apply to this AD. ■ (a) Comments Due Date None. (h) Exceptions to EASA AD 2020–0100 PART 39—AIRWORTHINESS DIRECTIVES § 39.13 (b) Affected ADs (i) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending PO 00000 Frm 00008 Fmt 4702 Sfmt 4702 information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph (j)(2) of this AD. Information may be emailed to: 9-AVS-AIR730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Airbus SAS’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature. (3) Required for Compliance (RC): For any service information referenced in EASA AD 2020–0100 that contains RC procedures and tests: Except as required by paragraph (i)(2) of this AD, RC procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC. (j) Related Information (1) For information about EASA AD 2020– 0100, contact the EASA, Konrad-AdenauerUfer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: ADs@easa.europa.eu; Internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2020–0673. (2) For more information about this AD, contact Dan Rodina, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; phone and fax: 206–231–3225; email: dan.rodina@faa.gov. Issued on July 21, 2020. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–16170 Filed 7–27–20; 8:45 am] BILLING CODE 4910–13–P E:\FR\FM\28JYP1.SGM 28JYP1

Agencies

[Federal Register Volume 85, Number 145 (Tuesday, July 28, 2020)]
[Proposed Rules]
[Pages 45350-45352]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-16170]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2020-0673; Product Identifier 2020-NM-076-AD]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for all Airbus SAS Model A330-200 series, Model A330-200 Freighter 
series, Model A330-300 series, Model A330-900 series, Model A340-200 
series, Model A340-300 series, Model A340-500 series, Model A340-600 
series, Model A380-800 series airplanes; and Model A350-941 and -1041 
airplanes. This proposed AD was prompted by a report of a quality issue 
with a certain repair method of damage-through honeycomb core cargo 
linings by speed patches applied to both sides. This proposed AD would 
require a detailed inspection of each affected part and, depending on 
findings, repair of each affected part, or replacement with a 
serviceable part, as specified in a European Union Aviation Safety 
Agency (EASA) AD, which will be incorporated by reference. The FAA is 
proposing this AD to address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by September 
11, 2020.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For material incorporated by reference (IBR) in this AD, contact 
the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 
221 8999 000; email: [email protected]; internet: www.easa.europa.eu. 
You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call 206-231-3195. It is also available in the AD 
docket on the internet at https://www.regulations.gov by searching for 
and locating Docket No. FAA-2020-0673.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-
0673; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this NPRM, any comments received, and other information. The street 
address for Docket Operations is listed above. Comments will be 
available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large 
Aircraft Section, International Validation Branch, FAA, 2200 South 
216th St., Des Moines, WA 98198; phone and fax: 206-231-3225; email: 
[email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under the ADDRESSES section. Include ``Docket No. FAA-2020-0673; 
Product Identifier 2020-NM-076-AD'' at the beginning of your comments. 
The most helpful comments reference a specific portion of the proposal, 
explain the reason for any recommended change, and include supporting 
data. The FAA will consider all comments received by the closing date 
and may amend this NPRM based on those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments the FAA receives, without change, 
to https://www.regulations.gov, including any personal information you 
provide. The FAA will also post a report summarizing each substantive 
verbal contact the FAA receives about this NPRM.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to the 
person identified in the FOR FURTHER INFORMATION CONTACT section. Any 
commentary that the FAA receives which is not specifically designated 
as CBI will be placed in the public docket for this rulemaking.

[[Page 45351]]

Discussion

    The EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2020-0100, dated May 5, 2020 (``EASA 
AD 2020-0100'') (also referred to as the Mandatory Continuing 
Airworthiness Information, or ``the MCAI''), to correct an unsafe 
condition for all Airbus SAS Model A330-200 series, Model A330-200 
Freighter series, Model A330-300 series, Model A330-900 series, Model 
A340-200 series, Model A340-300 series, Model A340-500 series, Model 
A340-600 series, Model A380-800 series airplanes; and Model A350-941 
and -1041 airplanes.
    This proposed AD was prompted by a report of a quality issue with a 
certain repair method (known as Speedpatch AF800) of damage-through 
honeycomb core cargo linings by speed patches applied to both sides. 
Speedpatch AF800 is not compliant with the flame penetration tests. The 
FAA is proposing this AD to address reduced ability of repaired linings 
to contain smoke or fire, resulting in an increased risk of an 
uncontained fire in the cargo compartment and consequent structural 
damage to the airplane. See the MCAI for additional background 
information.

Related IBR Material Under 1 CFR Part 51

    EASA AD 2020-0100, dated May 5, 2020, describes procedures for a 
detailed inspection of each affected part and, depending on findings, 
repair of each affected part, or replacement with a serviceable part. 
This material is reasonably available because the interested parties 
have access to it through their normal course of business or by the 
means identified in the ADDRESSES section.

FAA's Determination and Requirements of This Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to our bilateral agreement with the State of Design Authority, the FAA 
has been notified of the unsafe condition described in the MCAI 
referenced above. The FAA is proposing this AD because the FAA 
evaluated all the relevant information and determined the unsafe 
condition described previously is likely to exist or develop in other 
products of the same type design.

Proposed AD Requirements

    This proposed AD would require accomplishing the actions specified 
in EASA AD 2020-0100 described previously, as incorporated by 
reference, except for any differences identified as exceptions in the 
regulatory text of this AD.

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA initially worked with Airbus and EASA to develop a 
process to use certain EASA ADs as the primary source of information 
for compliance with requirements for corresponding FAA ADs. The FAA has 
since coordinated with other manufacturers and civil aviation 
authorities (CAAs) to use this process. As a result, EASA AD 2020-0100 
will be incorporated by reference in the FAA final rule. This proposed 
AD would, therefore, require compliance with EASA AD 2020-0100 in its 
entirety, through that incorporation, except for any differences 
identified as exceptions in the regulatory text of this proposed AD. 
Using common terms that are the same as the heading of a particular 
section in the EASA AD does not mean that operators need comply only 
with that section. For example, where the AD requirement refers to 
``all required actions and compliance times,'' compliance with this AD 
requirement is not limited to the section titled ``Required Action(s) 
and Compliance Time(s)'' in the EASA AD. Service information specified 
in EASA AD 2020-0100 that is required for compliance with EASA AD 2020-
0100 will be available on the internet at https://www.regulations.gov 
by searching for and locating Docket No. FAA-2020-0673 after the FAA 
final rule is published.

Costs of Compliance

    The FAA estimates that this proposed AD affects 127 airplanes of 
U.S. registry. The FAA estimates the following costs to comply with 
this proposed AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
                           Labor cost                               Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
20 work-hours x $85 per hour = $1,700...........................              $0          $1,700        $215,900
----------------------------------------------------------------------------------------------------------------

    The FAA estimates the following costs to do any necessary on-
condition repairs that would be required based on the results of any 
required actions. The FAA has no way of determining the number of 
aircraft that might need these on-condition repairs:

                 Estimated Costs of On-Condition Actions
------------------------------------------------------------------------
                                                             Cost per
               Labor cost                   Parts cost        product
------------------------------------------------------------------------
2 work-hours x $85 per hour = $170......               *            $170
------------------------------------------------------------------------
* The FAA has received no definitive data that would enable us to
  provide cost estimates for the parts required for the on-condition
  repairs specified in this proposed AD.

    The FAA has received no definitive data that would enable us to 
provide cost estimates for the on-condition replacements specified in 
this proposed AD.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section

[[Page 45352]]

44701: General requirements. Under that section, Congress charges the 
FAA with promoting safe flight of civil aircraft in air commerce by 
prescribing regulations for practices, methods, and procedures the 
Administrator finds necessary for safety in air commerce. This 
regulation is within the scope of that authority because it addresses 
an unsafe condition that is likely to exist or develop on products 
identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

Airbus SAS: Docket No. FAA-2020-0673; Product Identifier 2020-NM-
076-AD.

(a) Comments Due Date

    The FAA must receive comments by September 11, 2020.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to all the Airbus SAS airplanes identified in 
paragraphs (c)(1) through (10), certificated in any category.
    (1) Model A330-201, -202, -203, -223, and -243 airplanes.
    (2) Model A330-223F and -243F airplanes.
    (3) Model A330-301, -302, -303, -321, -322, -323, -341, -342, 
and -343 airplanes.
    (4) Model A330-941 airplanes.
    (5) Model A340-211, -212, and -213 airplanes.
    (6) Model A340-311, -312, and -313 airplanes.
    (7) Model A340-541 airplanes.
    (8) Model A340-642 airplanes.
    (9) Model A350-941 and -1041 airplanes.
    (10) Model A380-841, -842, and -861 airplanes.

(d) Subject

    Air Transport Association (ATA) of America Code 25, Equipment/
furnishings.

(e) Reason

    This AD was prompted by a report of a quality issue with a 
certain repair method of damage-through honeycomb core cargo linings 
by speed patches applied to both sides. The FAA is issuing this AD 
to address reduced ability of repaired linings to contain smoke or 
fire, resulting in an increased risk of an uncontained fire in the 
cargo compartment and consequent structural damage to the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2020-0100, dated May 5, 2020 (``EASA AD 2020-0100'').

(h) Exceptions to EASA AD 2020-0100

    (1) Where EASA AD 2020-0100 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) The ``Remarks'' section of EASA AD 2020-0100 does not apply 
to this AD.

(i) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Large Aircraft Section, International Validation Branch, FAA, has 
the authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the Large Aircraft Section, International Validation 
Branch, send it to the attention of the person identified in 
paragraph (j)(2) of this AD. Information may be emailed to: [email protected]. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the local flight standards district office/
certificate holding district office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, Large Aircraft 
Section, International Validation Branch, FAA; or EASA; or Airbus 
SAS's EASA Design Organization Approval (DOA). If approved by the 
DOA, the approval must include the DOA-authorized signature.
    (3) Required for Compliance (RC): For any service information 
referenced in EASA AD 2020-0100 that contains RC procedures and 
tests: Except as required by paragraph (i)(2) of this AD, RC 
procedures and tests must be done to comply with this AD; any 
procedures or tests that are not identified as RC are recommended. 
Those procedures and tests that are not identified as RC may be 
deviated from using accepted methods in accordance with the 
operator's maintenance or inspection program without obtaining 
approval of an AMOC, provided the procedures and tests identified as 
RC can be done and the airplane can be put back in an airworthy 
condition. Any substitutions or changes to procedures or tests 
identified as RC require approval of an AMOC.

(j) Related Information

    (1) For information about EASA AD 2020-0100, contact the EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 
000; email: [email protected]; Internet www.easa.europa.eu. You may 
find this EASA AD on the EASA website at https://ad.easa.europa.eu. 
You may view this material at the FAA, Airworthiness Products 
Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at 
the FAA, call 206-231-3195. This material may be found in the AD 
docket on the internet at https://www.regulations.gov by searching 
for and locating Docket No. FAA-2020-0673.
    (2) For more information about this AD, contact Dan Rodina, 
Aerospace Engineer, Large Aircraft Section, International Validation 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; phone and 
fax: 206-231-3225; email: [email protected].

    Issued on July 21, 2020.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification 
Service.

[FR Doc. 2020-16170 Filed 7-27-20; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.