Certain New Chemicals; Receipt and Status Information for May 2020, 36844-36849 [2020-13135]
Download as PDF
<![CDATA[
36844
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2020–0077; FRL–10010–
79]
Certain New Chemicals; Receipt and
Status Information for May 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN), or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 05/01/2020 to
05/31/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
July 20, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Please note that due to the public
health emergency the EPA Docket
SUMMARY:
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
Center (EPA/DC) and Reading Room
was closed to public visitors on March
31, 2020. Our EPA/DC staff will
continue to provide customer service
via email, phone, and webform. For
further information on EPA/DC services,
docket contact information and the
current status of the EPA/DC and
Reading Room, please visit https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
05/01/2020 to 05/31/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs, and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
PO 00000
Frm 00017
Fmt 4703
Sfmt 4703
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN, or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
E:\FR\FM\18JNN1.SGM
18JNN1
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7)). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
36845
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 05/01/2020 TO 05/31/2020
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(G) Isocyanate terminated polyurethane resin.
(G) Styrene(ated) copolymer with
alkyl(meth)acrylate, and (meth)acrylic acid.
(G) Styrene(ated) copolymer with
alkyl(meth)acrylate, and (meth)acrylic acid.
(G) Cycloaliphatic diamine, polymer with .alphahydro-.omega.-hydroxypoly(oxy-alkanediyl),
.alpha-hydro-.omega.-hydroxypoly(oxyalkanediyl), and cycloaliphatic diisocyanate.
(G) 1,3-Propanediol,2-methylene-, substituted.
P–16–0417A .....
P–17–0002A .....
3
5
5/11/2020
4/30/2020
CBI ....................................
CBI ....................................
(G) Adhesive for open, non-descriptive use
(G) Printing ink applications .......................
P–17–0003A .....
11
4/30/2020
CBI ....................................
(G) Printing ink applications .......................
P–17–0026A .....
5
4/30/2020
CBI ....................................
(G) Industrial Ink printing applications .......
P–17–0195A .....
8
5/13/2020
CBI ....................................
P–17–0324A .....
P–17–0333A .....
2
8
5/7/2020
5/15/2020
Vertellus Specialties, Inc ..
Miwon North America, Inc
(G) For manufacturing modified Ethylene
vinyl alcohol copolymer.
(S) Chemical intermediate, destructive use
(S) Reactive diluent for optical film coating
P–17–0376A .....
7
5/18/2020
Innovative Chemical Technologies, Inc.
(S) Textile additive .....................................
P–17–0377A .....
7
5/18/2020
Innovative Chemical Technologies, Inc.
(S) Textile Additive .....................................
P–17–0378A .....
7
5/18/2020
Innovative Chemical Technologies, Inc.
(S) Textile additive .....................................
P–17–0379A .....
7
5/18/2020
Innovative Chemical Technologies, Inc.
(S) Textile Additive .....................................
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
(S) 2,4-Hexadien-1-ol, 1-acetate, (2E,4E)-.
(G) 2-Propenoic acid, mixed esters with heterocyclic dimethanol and heterocyclic methanol.
(G) 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl
ester polymer with hexadecyl 2-propenoate,
octadecyl 2-propenoate and
3,3,4,4,5,5,6,6,7,7,8,8,8tridecasubstitutedoctyl 2-propenoate.
(G) 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl
ester, polymer with hexadecyl 2-propenoate,
octadecyl 2-propenoate and
3,3,4,4,5,5,6,6,7,7,8,8,8tridecasubstitutedoctyl 2-methyl-2-propenoate.
(G) 2-Propenoic acid, 2-methyl-, hexadecyl
ester, polymer with 2-hydroxyethyl 2-methyl2-propenoate, octadecyl 2-methyl-2propenoate and 3,3,4,4,5,5,6,6,7,7,8,8,8tridecasubstitutedoctyl 2-propenoate.
(G) 2-Propenoic acid, 2-methyl-, hexadecyl
ester, polymer with 2-hydroxyethyl 2-methyl2-propenoate, octadecyl 2-methyl-2propenoate and 3,3,4,4,5,5,6,6,7,7,8,8,8tridecasubstitutedoctyl 2-methyl-2-propenoate.
E:\FR\FM\18JNN1.SGM
18JNN1
36846
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 05/01/2020 TO 05/31/2020—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–18–0146A .....
3
5/19/2020
Arakawa Chemical (USA),
Inc.
(G) Primer paint binders for open non-dispersive uses.
P–18–0151A .....
10
5/21/2020
Struers, Inc .......................
(S) A curing agent for curing epoxy systems.
P–18–0153A .....
P–18–0170A .....
3
5
5/20/2020
5/23/2018
CBI ....................................
CBI ....................................
(G) Mixed metal oxide for batteries ...........
(G) Textile treatment ..................................
P–18–0178A
P–18–0217A
P–18–0218A
P–18–0235A
.....
.....
.....
.....
3
4
4
3
5/20/2020
5/20/2020
5/20/2020
12/28/2018
CBI ....................................
Galata Chemicals, LLC ....
Galata Chemicals, LLC ....
CBI ....................................
P–18–0289A .....
5
5/22/2020
CBI ....................................
(S) Stabilizer for PVC .................................
(S) Stabilizer for PVC compound ...............
(S) Stabilizer for PVC compound ...............
(S) Component in automotive gasoline/
transportation fuel for consumer use.
(G) Gas scrubbing, landfill deoderizing,
and wastewater deoderizing.
P–18–0290A .....
5
5/22/2020
CBI ....................................
P–18–0320A .....
P–18–0330A .....
2
3
5/1/2020
5/20/2020
CBI ....................................
CBI ....................................
P–18–0332A .....
P–18–0333A .....
P–18–0340A .....
2
2
3
5/21/2020
5/21/2020
5/18/2020
Cargill, Inc .........................
Cargill, Inc .........................
Lanxess Solutions US, Inc
(G) a component in building materials .......
(G) a component in building materials .......
(S) One component thermoset elastomer
manufacture.
P–18–0348A .....
2
5/18/2020
Lanxess Solutions US, Inc
(S) Thermoplastic elastomer manufacture/
Injection Moulding.
P–18–0349A .....
4
5/18/2020
Lanxess Solutions US, Inc
(S) Two component adhesives and protective coatings for marine, infrastructure,
etc.
P–18–0350A .....
3
5/14/2020
Evonik Corporation ...........
P–18–0360A .....
2
5/18/2020
Lanxess Solutions, US Inc
(S) Additive in water-borne UV-curable
coatings, Filler pigment treatment, and
Glass fiber treatment.
(S) Two component adhesives and protective coatings for marine, infrastructure,
etc.
P–18–0361A .....
4
5/18/2020
Lanxess Solutions, US Inc
(S) Electrophoretic paint .............................
P–18–0362A .....
2
5/18/2020
Lanxess Solutions, US Inc
(S) Corrosion protection coatings ..............
P–18–0380A .....
7
5/7/2020
CBI ....................................
P–18–0403A .....
4
5/22/2020
Clariant Plastics & Coatings USA, Inc.
(G) Automotive brake parts (contained
use).
(S) Dispersing agent for pigments, paints,
and coatings.
P–18–0405A .....
5
5/20/2020
CBI ....................................
(G) adhesive ...............................................
P–19–0041A .....
3
5/1/2020
CBI ....................................
(G) Oil water separation .............................
P–19–0042A .....
3
5/1/2020
CBI ....................................
(G) Oil water separation .............................
P–19–0043A .....
3
5/1/2020
CBI ....................................
(G) Oil water separation .............................
P–19–0044A .....
3
5/1/2020
CBI ....................................
(G) Oil water separation .............................
P–19–0053A .....
9
5/19/2020
Wacker Chemical Corporation.
(S) Used as a surface treatment, sealant,
caulk, and coating for mineral building
materials such as concrete, brick, limestone, and plaster, as well as on wood,
metal and other substrates.
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
PO 00000
Frm 00019
(G) Gas scrubbing, wastewater
deoderizing, and landfill odor neutralizing.
(G) Hardner ................................................
(G) initiator ..................................................
Fmt 4703
Sfmt 4703
(G) Modified fat amines, polymers with
bisphenol A, alkanolamines, epichlorohydrin,
alkylamine and substituted isocyanato
[isocyanatoalkylcarbomonocyle].
(S) Formaldehyde, reaction products with 1,3benzenedimethanamine and p-tert-butylphenol.
(G) Lithium mixed metal oxide.
(S) 1-Propanaminium, N,N′-(oxydi-2,1ethanediyl)bis[3-chloro-2-hydroxy-N,N-dimethyl-, dichloride.
(G) Dialkyltin dialkylcarboxylate.
(G) Alkyltin dodecylthioester.
(G) Alkyltin tetradecylthioester.
(G) Naphtha Oils.
(G) 2(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
(G) Carbomonocylic-oxazolidine.
(G) Alkane, diisocyanato-(isocyanatoalkyl)-.
(G) Formaldehyde, polymer with alkyl aryl ketone.
(S) Canola Meal.
(S) Flaxseed Meal.
(S) Poly(oxy-1,4-butanediyl), alpha-hydroomega-hydroxy-, polymer with 1,1′methylenebis[4-isocyanatobenzene],
caprolactam-blocked.
(S) Ethanol, 2,2′-[1,4-phenylenebis(oxy)]bis-,
polymer with 1,6-diisocyanatohexane and
-hydro—hydroxypoly(oxy-1,4-butanediyl).
(S) Oxirane, 2-methyl-, polymer with oxirane,
ether with 1,2,3-propanetriol (3:1), polymer
with 2,4-diisocyanato-1-methylbenzene,
branched 4-nonylphenol-blocked.
(G) Aqueous methacrylamido modified
polysiloxane.
(S) Oxirane, 2-methyl-, polymer with 2,4diisocyanato-1-methylbenzene, 2methyloxirane polymer with oxirane ether with
1,2,3-propanetriol (3:1), and oxirane, cashew
nutshell liq.- and Pr alc. -blocked.
(S) Propanoic acid, 3-hydroxy-2(hydroxymethyl)-2-methyl-, polymer with
1,3,5-tris(6-isocyanatohexyl)-1,3,5-triazine2,4,6(1H,3H,5H)-trione, 3,5-dimethyl- 1H-pyrazole-blocked.
(S) 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl)-,
polymer with 2,4-diisocyanato-1-methyl-benzene, -hydro—hydroxypoly[oxy(methyl-1,2ethanediyl)] and -1,2,3-propanetriyltris[hydroxypoly[oxy(methyl-1,2-ethanediyl)]], Me
Et ketone oxime -blocked.
(G) Butanoic acid ethyl amine.
(S) 2-Propenoic acid, 2-methyl-, butyl ester,
polymer with 2-(dimethylamino)ethyl 2-methyl2-propenoate and 2-ethylhexyl 2-methyl-2propenoate.
(S) Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 3,6,9,12-tetraoxatetradeca-1,13diene, glycidyl ether.
(G) Alkyl diester, polymer with (dialkylamino
alkyl) amine and bis(halogenated alkyl) ether.
(G) Alkyl diester, polymer with (dialkylamino
alkyl) amine and bis(halogenated alkyl) ether.
(G) Alkyl dicarboxylic acid, polymer with
(dialkylamino alkyl) amine and
bis(halogenated alkyl) ether.
(G) Alkyl bis(dialkylamino alkyl) amide polymer
with bis(halogenated alkyl) ether.
(S) 1-Butanamine, N-butyl-N[(triethoxysilyl)methyl]-.
E:\FR\FM\18JNN1.SGM
18JNN1
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
36847
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 05/01/2020 TO 05/31/2020—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(G) 4,4′-methylenebis[2,6-dimethyl phenol] polymer with 2-(chloromethyl)oxirane, 1,4-benzyl
diol, 2-methyl-2-propenoic acid, butyl 2-methyl
2-propenoate, ethyl 2-methyl 2-propenoate,
and ethyl 2-propenoate, reaction products
with 2-(dimethylamino) ethanol.
(G) 4,4′-methylenebis[2,6-dimethyl phenol] polymer with 2-(chloromethyl)oxirane, 1,4-benzyl
diol, 2-methyl-2-propenoic acid, butyl 2-methyl
2-propenoate, ethyl 2-methyl 2-propenoate,
and ethyl 2-propenoate, reaction products
with 2-(dimethylamino) ethanol.
(S) DIphosphoric acid, compd. with 1,3,5-triazine-2,4,6-triamine (1:2).
S) Copper, [[2,2′,2″-(nitrilo.kappa.N)tris[ethanolato-.kappa.O]](2-)]-;(S)
Copper, bis[2-(amino-.kappa.N)ethanolato.kappa.O]-;.
(G) sr-(Wasp Spider Polypeptide-1
Oligopeptide-178).
P–19–0064A .....
7
3/27/2020
The Sherwin Williams
Company.
(G) Polymeric film former for coatings .......
P–19–0064A .....
8
5/15/2020
The Sherwin Williams
Company.
(G) Polymeric film former for coatings .......
P–19–0084A .....
3
5/13/2020
CBI ....................................
(S) Flame retardant ....................................
P–19–0109A .....
10
5/6/2020
Arch Chemicals, Inc .........
P–19–0116A .....
5
5/26/2020
CBI ....................................
P–19–0153A .....
6
4/30/2020
Wego Chemical Group .....
P–19–0153A .....
7
5/5/2020
Wego Chemical Group .....
P–20–0005A .....
5
5/8/2020
P–20–0010A .....
7
5/8/2020
RMC Advanced Technologies, Inc.
CBI ....................................
(G) The chemical is used as a component
of a cleaning formulation to improve the
wettability of the overall cleaning solution on the substrate.
(S) Silk protein for production of fiber,
Skincare use as additive in dermal moisturizing lotions.
(S) Raw material in Flame Retardant product.
(S) Raw material in Flame Retardant product.
(G) Additive for plastics and resins ............
P–20–0015A .....
6
5/21/2020
GE Healthcare ..................
(S) The polymer is used in the manufacture of hollow fiber products.
P–20–0036A .....
3
5/21/2020
Sigma-Aldrich Co., LLC ....
P–20–0037A .....
4
5/21/2020
Sigma-Aldrich Co., LLC ....
P–20–0047 ........
6
5/14/2020
Nanosystems, Inc .............
(G) Used in the manufacture of Lithium-6
Chloride.
(G) The material is used in manufacturing
devices for gamma and neutron radiation detection.
(S) Hydrophilic polyurethane prepolymer
used to manufacture flexible foams.
P–20–0062A .....
2
5/11/2020
Inabata America Corporation.
P–20–0063A .....
2
5/11/2020
Inabata America Corporation.
P–20–0064A .....
2
5/11/2020
Inabata America Corporation.
P–20–0065A .....
2
5/11/2020
Inabata America Corporation.
P–20–0069A .....
3
5/15/2020
CBI ....................................
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
PO 00000
Frm 00020
(G) Polymerization auxiliary .......................
(S) Use as an electrically conductive material, an additive in field emission applications, an additive in batteries, energy
storage, and electrode applications, an
additive to improve physical or mechanical properties, an additive for weight reduction, a heat generation and dissipation material.
(S) Use as an electrically conductive material, an additive in field emission applications, an additive in batteries, energy
storage, and electrode applications, an
additive to improve physical or mechanical properties, an additive for weight reduction, a heat generation and heat dissipation material.
(S) Use as an additive in batteries, energy
storage, and electrode applications, an
additive to improve physical or mechanical properties, an additive for weight reduction, a heat generation and dissipation material, and electrically conductive
material and an additive in field emission applications.
(S) Use as an electrically conductive material, an additive in field emission applications, batteries, energy storage, and
electrode applications. Use as an additive to improve physical or mechanical
properties, an additive for weight reduction, a heat generation and heat dissipation material.
(G) Surface-active chemical .......................
Fmt 4703
Sfmt 4703
(G) Dibromoalkyl ether Tetrabromobisphenol A.
(G) Dibromoalkyl ether Tetrabromobisphenol A.
(G) modified graphene.
(G) Carboxylic acid, reaction products with
metal hydroxide, inorganic dioxide and metal.
(G) N-alkyl heteromonocyclic diphenolamide,
polymer with Bisphenol A, haloaryl-substituted
sulfone, compd. with cyclic sulfonate ester,
polyaryl alcohol terminated.
(S) Carbonic acid, di(lithium-6Li) salt.
(S) Lithium Chloride (6LiCl).
(G) Oxirane, 2-methyl-, polymer with oxirane,
ether with propanetriol (3:1), polymer with
poly(oxy-1,2-ethanediyl) and
methylenebis[isocyanatobenzene].
(S) Multi-walled carbon nanotubes; closed; 4.4–
12.8 nm diameter; bundle length 10.6–211.1
um; Grade: Jenotube 6 (Substance-1).
(S) Multi-walled carbon nanotubes; closed; 5.1–
11.6 nm diameter; bundle length 1.9–552.0
um; Grade: Jenotube 8 (Substance-2).
(S) Multi-walled carbon nanotubes; closed; 7.9–
14.2 nm diameter; bundle length 9.4–106.4
um; Grade: Jenotube 10 (Substance-3).
(S) Multi-walled carbon nanotubes; closed;
17.0–34.7 nm diameter; globular shape;
Grade: Jenotube 20 (Substance-4).
(G) 2-Propenoic acid, 2-methyl-, polymer with 2hydroxyethyl 2-methyl-2-propenoate phosphate and 2-propenoic acid salt,
peroxydisulfuric acid ([(HO)S(O)2]2O2) sodium salt (1:2)- and sodium (disulfite) (2:1)initiated.
E:\FR\FM\18JNN1.SGM
18JNN1
36848
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 05/01/2020 TO 05/31/2020—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(G) 2-Propenoic acid, 2-methyl-, polymer with 2hydroxyethyl 2-methyl-2-propenoate phosphate and 2-propenoic acid salt,
peroxydisulfuric acid ([(HO)S(O)2]2O2) sodium salt (1:2)- and sodium (disulfite) (2:1)initiated.
(S) Glycine, reaction products with sodium Oiso-Pr carbonodithioate, sodium salts.
(G) Bis(triethoxysilylpropyl carbamate)
perfluoropolyether.
(G) Bis(triethoxysilylpropyl carbamate)
perfluoropolyether.
(G) 2-Oxepanone, homopolymer, ester with
hydroxyalkyl trioxo heteromonocyclic (3:1).
(G) Napthalenesulfonic acid, amino-hydroxy-bis
[sulfo-[(sulfooxy)ethyl]sulfonyl]phenyl]diazinyl], potassium sodium salt.
(G) Alkanoic acid, 3-hetero-atom substituted-2(heteroatom-substituted alkyl)-2-alkyl-, polymer with 1,2-alkanediamine, alpha-hydroomega-heteroatom-substituted poly(oxy-1,4alkanediyl) and 5-hetero-atom substituted- 1(heteroatom-substituted alkyl)-1, 3, 3trialkylcycloalkane.
(G) Alkanoic acid, 3-hetero-atom substituted-2(heteroatom-substituted alkyl)-2-alkyl-, polymer with 1,2-alkanediamine, alpha-hydroomega-heteroatom-substituted poly(oxy-1,4alkanediyl) and 5-hetero-atom substituted- 1(heteroatom-substituted alkyl)-1, 3, 3trialkylcycloalkane.
(G) Alkanedioic acid, polymer with tri-alkylisocyanatocarbomonocycle, dialkylglycols,
ester with 2,3-dihydroxypropyl alkyl ester, 2hydroxyethyl methacrylate-blocked.
P–20–0069A .....
4
5/16/2020
CBI ....................................
(G) Surface-active chemical .......................
P–20–0076A .....
2
5/21/2020
Cytec Industries, Inc .........
(G) Mining chemical ...................................
P–20–0085 ........
5
5/7/2020
Luna Innovations, Inc .......
(S) Fluid resistant coatings ........................
P–20–0085A .....
6
5/14/2020
Luna Innovations, Inc .......
(S) Fluid resistant coatings ........................
P–20–0086A .....
3
5/11/2020
Daicel Chemtech, Inc .......
(G) Component of polymers .......................
P–20–0092 ........
5
5/22/2020
CBI ....................................
(G) Coloration of fabric ...............................
P–20–0093 ........
2
5/4/2020
Ashland, Inc ......................
(G) Coating .................................................
P–20–0093A .....
3
5/21/2020
Ashland, Inc ......................
(G) Coating .................................................
P–20–0094 ........
1
4/29/2020
CBI ....................................
P–20–0095 ........
1
5/4/2020
Evonik Corporation ...........
(S) Formulation component in UV/EB coatings, inks and 3D printing/
stereolithography/additive and Formulation component in UV/EB adhesive manufacturing.
(S) Additive to improve melt flow, scratch
resistance, demoulding and lower COF
of thermoplastic compounds.
P–20–0096 ........
2
5/19/2020
CBI ....................................
(G) Use in papermaking process ...............
P–20–0097 ........
1
5/7/2020
Nelson Brothers, LLC .......
P–20–0102 ........
1
5/22/2020
P–20–0104 ........
2
5/26/2020
Novihum Technologies,
Inc.
CBI ....................................
(S) The PMN substance will be used as
an emulsifier for applications in explosives.
(S) Fertilizer/Soil amendment .....................
SN–19–0006A ...
4
5/13/2020
CBI ....................................
SN–19–0006A ...
5
5/15/2020
CBI ....................................
(G) Additive ................................................
(G) Component for 3D Printing formulations.
(G) Component for 3D Printing formulations.
(S) Siloxanes and Silicones, di-Me,
[(phenylsilylidyne)tris(oxy)]tris-, 3-(2hydroxyethoxy)propyl group-terminated,
triesters with 2-oxepanone homopolymer.
(G) Unsaturated dicarboxylic acid polymer with
2-(dialkylamino)alkyl-alkyl-alkanoate, N, Ndialkyl-alkene amide, 2-propenamide and salt
of alkyl-substituted alkene sulfonate.
(G) Butanedioic acid, monopolyisobutylene
derivs., mixed dihydroxyalkyl and
hydroxyalkoxyalkyl diesters.
(S) Chemical Abstract (CA) index name: Coal,
brown, ammoxidized.
(G) Alkenoic acid, polymer with (alkyl alkenyl)
polyether.
(S) 2-Propen-1-one, 1-(4-morpholinyl)-.
(S) 2-Propen-1-one, 1-(4-morpholinyl)-.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 05/01/2020 TO 05/31/2020
Received
date
Case No.
Commencement
date
If amendment,
type of
amendment
P–00–0536 .........
05/27/2020
04/06/2020
N
P–08–0378 .........
05/05/2020
04/21/2020
N
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
PO 00000
Frm 00021
Chemical substance
(G) Polyoxyalkylene solution with trimethylolpropane, 1,4 cyclohexane
dimethanol, cyclic aliphatic anhydrides and trimellitic anhydride.
(G) Arylalkylamine, n-[4-[2-(substitutedaryl)diazinyl]arylamino]-.
Fmt 4703
Sfmt 4703
E:\FR\FM\18JNN1.SGM
18JNN1
Federal Register / Vol. 85, No. 118 / Thursday, June 18, 2020 / Notices
36849
TABLE II—NOCS APPROVED * FROM 05/01/2020 TO 05/31/2020—Continued
Received
date
Case No.
Commencement
date
If amendment,
type of
amendment
P–11–0581 .........
05/08/2020
12/18/2011
N
P–11–0582 .........
05/08/2020
12/19/2011
N
P–14–0342 .........
05/07/2020
05/01/2020
N
P–16–0445 .........
05/22/2020
05/21/2020
N
P–16–0451 .........
P–17–0191 .........
05/29/2020
05/12/2020
05/21/2020
04/12/2020
N
N
P–17–0345 .........
05/08/2020
05/07/2020
N
P–17–0346 .........
P–18–0092 .........
P–18–0098 .........
05/13/2020
05/22/2020
04/30/2020
05/05/2020
03/06/2020
04/30/2020
N
N
N
P–18–0121 .........
P–18–0341 .........
05/26/2020
05/28/2020
05/17/2020
05/12/2020
N
N
P–18–0342 .........
05/27/2020
05/11/2020
N
P–19–0137 .........
P–19–0189 .........
05/04/2020
05/01/2020
05/01/2020
04/21/2020
N
N
P–20–0013 .........
05/05/2020
04/14/2020
N
Chemical substance
(S) 1h-1,2,4-triazole-5-acetic acid, 1-acetyl-3-[4-(1,1dimethylethyl)phenyl]-, 2,6-bis(1,1-dimethylethyl)-4methylcyclohexyl ester.
(S) 1h-1,2,4-triazole-5-acetic acid, 1-acetyl-alpha-bromo-3-[4-(1,1dimethylethyl)phenyl]-, 2,6-bis(1,1-dimethylethyl)-4methylcyclohexyl ester.
(G) Poly[oxy(methyl-1–2-ethanedilyl)], alpha-(2-propylalkyl) )-omegahydroxy-.
(G) Carboxylic acids, unsaturated, hydrogenated polymers with substituted alkanediamine, alkanediol, substituted alkylpropanoic acid,
alkanedioic acid and substituted isocyanatocycloalkane, compds
with alkylamine.
(G) Siloxane binder.
(G) Alkyldiamine, aminoalkyl dimethylaminoalkyl dimethyl-, reaction
products with propylene oxide.
(G) Alkanediol, polymer with alkylenebis(4-isocyanatocarbomoncycle),
alkylaminoalkyl methacrylate-blocked.
(G) Triarylalkyl phosphonium halide salt.
(S) Tri-n-butyl methyl phosphonium iodide.
(G) Polyphosphoric acids, polymers with (alkoxyalkoxy)alkanol and
substituted heteromonocycle.
(S) Benzene, 1,1′-oxybis-, branched eicosyl derivs.
(G) Alkane dicarboxylic acid, polymer with alkoxylated polyalcohol,
alkyl polyglycol, alkyl dialcohol, and functionalized carboxylic acid.
(G) Alkane dicarboxylic acid, polymer with alkyl polyglycol, alkyl
dialcohol, and functionalized carboxylic acid.
(S) Octadecene, reaction products with hexadecene, hydrogenated.
(S) Fatty acids, c18-unsatd., dimers, hydrogenated, polymers with
1,6-hexanediol and 1,1′-methylenebis[4- isocyanatobenzene].
(S) 2-propenoic acid, 2-methyl-, (2-oxo-1,3-dioxolan-4-yl)methyl ester.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 05/01/2020 TO 05/31/2020
Case No.
Received
date
Type of test information
Chemical substance
L–18–0155 ...
05/22/2020
Certificate of Analysis (Terasil Black W–S Box 25KG)
L–20–0018 ...
05/19/2020
P–16–0462 ..
05/11/2020
Alga, Growth Inhibition Test with Pseudokirchneriella
subcapitata, 72 hours (OECD Test Guideline 201).
Metals Analysis Report for Quarter 1 2020 (Method
6010B).
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
(G) Glycine, [acetylamino-[(bromo-nitroaryl)azenyl]methoxyaryl]-(methoxy-oxoethyl), alkyl ester.
(S) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-[4(ethenyloxy)butyl]-.omega.-hydroxyl-.
(G) Silane-treated aluminosilicate.
Dated: June 8, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2020–13135 Filed 6–17–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–SFUND–2012–0104; FRL–10010–
97–OLEM]
Proposed Information Collection
Request; Comment Request;
Brownfields Program—
Accomplishment Reporting (Renewal)
Authority: 15 U.S.C. 2601 et seq.
Environmental Protection
Agency (EPA).
AGENCY:
ACTION:
VerDate Sep<11>2014
17:40 Jun 17, 2020
Jkt 250001
PO 00000
Frm 00022
Fmt 4703
Sfmt 4703
E:\FR\FM\18JNN1.SGM
Notice.
18JNN1
]]>Agencies
[Federal Register Volume 85, Number 118 (Thursday, June 18, 2020)]
[Notices]
[Pages 36844-36849]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-13135]
[[Page 36844]]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10010-79]
Certain New Chemicals; Receipt and Status Information for May
2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN), or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 05/01/
2020 to 05/31/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before July 20, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Please note that due to the public health emergency the EPA Docket
Center (EPA/DC) and Reading Room was closed to public visitors on March
31, 2020. Our EPA/DC staff will continue to provide customer service
via email, phone, and webform. For further information on EPA/DC
services, docket contact information and the current status of the EPA/
DC and Reading Room, please visit https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 05/01/2020 to 05/31/2020. The Agency is providing notice of
receipt of PMNs, SNUNs, and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as
appropriate, before initiating the activity. EPA will review the
notice, make a risk determination on the chemical substance or
significant new use, and take appropriate action as described in TSCA
section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this
[[Page 36845]]
information to EPA through regulations.gov or email. Clearly mark the
part or all of the information that you claim to be CBI. For CBI
information in a disk or CD-ROM that you mail to EPA, mark the outside
of the disk or CD-ROM as CBI and then identify electronically within
the disk or CD-ROM the specific information that is claimed as CBI. In
addition to one complete version of the comment that includes
information claimed as CBI, a copy of the comment that does not contain
the information claimed as CBI must be submitted for inclusion in the
public docket. Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7)). Since the
passage of the Lautenberg amendments to TSCA in 2016, public interest
in information on the status of section 5 cases under EPA review and,
in particular, the final determination of such cases, has increased. In
an effort to be responsive to the regulated community, the users of
this information, and the general public, to comply with the
requirements of TSCA, to conserve EPA resources and to streamline the
process and make it more timely, EPA is providing information on its
website about cases reviewed under the amended TSCA, including the
section 5 PMN/SNUN/MCAN and exemption notices received, the date of
receipt, the final EPA determination on the notice, and the effective
date of EPA's determination for PMN/SNUN/MCAN notices on its website
at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved* From 05/01/2020 to 05/31/2020
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0417A........... 3 5/11/2020 CBI................. (G) Adhesive for (G) Isocyanate
open, non- terminated
descriptive use. polyurethane resin.
P-17-0002A........... 5 4/30/2020 CBI................. (G) Printing ink (G) Styrene(ated)
applications. copolymer with
alkyl(meth)acrylate,
and (meth)acrylic
acid.
P-17-0003A........... 11 4/30/2020 CBI................. (G) Printing ink (G) Styrene(ated)
applications. copolymer with
alkyl(meth)acrylate,
and (meth)acrylic
acid.
P-17-0026A........... 5 4/30/2020 CBI................. (G) Industrial Ink (G) Cycloaliphatic
printing diamine, polymer with
applications. .alpha-hydro-.omega.-
hydroxypoly(oxy-
alkanediyl), .alpha-
hydro-.omega.-
hydroxypoly(oxy-
alkanediyl), and
cycloaliphatic
diisocyanate.
P-17-0195A........... 8 5/13/2020 CBI................. (G) For manufacturing (G) 1,3-Propanediol,2-
modified Ethylene methylene-,
vinyl alcohol substituted.
copolymer.
P-17-0324A........... 2 5/7/2020 Vertellus (S) Chemical (S) 2,4-Hexadien-1-ol,
Specialties, Inc. intermediate, 1-acetate, (2E,4E)-.
destructive use.
P-17-0333A........... 8 5/15/2020 Miwon North America, (S) Reactive diluent (G) 2-Propenoic acid,
Inc. for optical film mixed esters with
coating. heterocyclic
dimethanol and
heterocyclic methanol.
P-17-0376A........... 7 5/18/2020 Innovative Chemical (S) Textile additive. (G) 2-Propenoic acid, 2-
Technologies, Inc. methyl-, 2-
hydroxyethyl ester
polymer with hexadecyl
2-propenoate,
octadecyl 2-propenoate
and
3,3,4,4,5,5,6,6,7,7,8,
8,8-
tridecasubstitutedocty
l 2-propenoate.
P-17-0377A........... 7 5/18/2020 Innovative Chemical (S) Textile Additive. (G) 2-Propenoic acid, 2-
Technologies, Inc. methyl-, 2-
hydroxyethyl ester,
polymer with hexadecyl
2-propenoate,
octadecyl 2-propenoate
and
3,3,4,4,5,5,6,6,7,7,8,
8,8-
tridecasubstitutedocty
l 2-methyl-2-
propenoate.
P-17-0378A........... 7 5/18/2020 Innovative Chemical (S) Textile additive. (G) 2-Propenoic acid, 2-
Technologies, Inc. methyl-, hexadecyl
ester, polymer with 2-
hydroxyethyl 2-methyl-
2-propenoate,
octadecyl 2-methyl-2-
propenoate and
3,3,4,4,5,5,6,6,7,7,8,
8,8-
tridecasubstitutedocty
l 2-propenoate.
P-17-0379A........... 7 5/18/2020 Innovative Chemical (S) Textile Additive. (G) 2-Propenoic acid, 2-
Technologies, Inc. methyl-, hexadecyl
ester, polymer with 2-
hydroxyethyl 2-methyl-
2-propenoate,
octadecyl 2-methyl-2-
propenoate and
3,3,4,4,5,5,6,6,7,7,8,
8,8-
tridecasubstitutedocty
l 2-methyl-2-
propenoate.
[[Page 36846]]
P-18-0146A........... 3 5/19/2020 Arakawa Chemical (G) Primer paint (G) Modified fat
(USA), Inc. binders for open non- amines, polymers with
dispersive uses. bisphenol A,
alkanolamines,
epichlorohydrin,
alkylamine and
substituted isocyanato
[isocyanatoalkylcarbom
onocyle].
P-18-0151A........... 10 5/21/2020 Struers, Inc........ (S) A curing agent (S) Formaldehyde,
for curing epoxy reaction products with
systems. 1,3-
benzenedimethanamine
and p-tert-
butylphenol.
P-18-0153A........... 3 5/20/2020 CBI................. (G) Mixed metal oxide (G) Lithium mixed metal
for batteries. oxide.
P-18-0170A........... 5 5/23/2018 CBI................. (G) Textile treatment (S) 1-Propanaminium,
N,N'-(oxydi-2,1-
ethanediyl)bis[3-
chloro-2-hydroxy-N,N-
dimethyl-, dichloride.
P-18-0178A........... 3 5/20/2020 CBI................. (S) Stabilizer for (G) Dialkyltin
PVC. dialkylcarboxylate.
P-18-0217A........... 4 5/20/2020 Galata Chemicals, (S) Stabilizer for (G) Alkyltin
LLC. PVC compound. dodecylthioester.
P-18-0218A........... 4 5/20/2020 Galata Chemicals, (S) Stabilizer for (G) Alkyltin
LLC. PVC compound. tetradecylthioester.
P-18-0235A........... 3 12/28/2018 CBI................. (S) Component in (G) Naphtha Oils.
automotive gasoline/
transportation fuel
for consumer use.
P-18-0289A........... 5 5/22/2020 CBI................. (G) Gas scrubbing, (G) 2-
landfill (2(methylcaboxymonocyc
deoderizing, and lic)amino)ethoxy)-
wastewater alcohol.
deoderizing.
P-18-0290A........... 5 5/22/2020 CBI................. (G) Gas scrubbing, (G) Carbomonocylic-
wastewater oxazolidine.
deoderizing, and
landfill odor
neutralizing.
P-18-0320A........... 2 5/1/2020 CBI................. (G) Hardner.......... (G) Alkane,
diisocyanato-
(isocyanatoalkyl)-.
P-18-0330A........... 3 5/20/2020 CBI................. (G) initiator........ (G) Formaldehyde,
polymer with alkyl
aryl ketone.
P-18-0332A........... 2 5/21/2020 Cargill, Inc........ (G) a component in (S) Canola Meal.
building materials.
P-18-0333A........... 2 5/21/2020 Cargill, Inc........ (G) a component in (S) Flaxseed Meal.
building materials.
P-18-0340A........... 3 5/18/2020 Lanxess Solutions (S) One component (S) Poly(oxy-1,4-
US, Inc. thermoset elastomer butanediyl), alpha-
manufacture. hydro-omega-hydroxy-,
polymer with 1,1'-
methylenebis[4-
isocyanatobenzene],
caprolactam-blocked.
P-18-0348A........... 2 5/18/2020 Lanxess Solutions (S) Thermoplastic (S) Ethanol, 2,2'-[1,4-
US, Inc. elastomer phenylenebis(oxy)]bis-
manufacture/ , polymer with 1,6-
Injection Moulding. diisocyanatohexane and
-hydro--hydroxypoly(ox
y-1,4-butanediyl).
P-18-0349A........... 4 5/18/2020 Lanxess Solutions (S) Two component (S) Oxirane, 2-methyl-,
US, Inc. adhesives and polymer with oxirane,
protective coatings ether with 1,2,3-
for marine, propanetriol (3:1),
infrastructure, etc. polymer with 2,4-
diisocyanato-1-
methylbenzene,
branched 4-nonylphenol-
blocked.
P-18-0350A........... 3 5/14/2020 Evonik Corporation.. (S) Additive in water- (G) Aqueous
borne UV-curable methacrylamido
coatings, Filler modified polysiloxane.
pigment treatment,
and Glass fiber
treatment.
P-18-0360A........... 2 5/18/2020 Lanxess Solutions, (S) Two component (S) Oxirane, 2-methyl-,
US Inc. adhesives and polymer with 2,4-
protective coatings diisocyanato-1-
for marine, methylbenzene, 2-
infrastructure, etc. methyloxirane polymer
with oxirane ether
with 1,2,3-
propanetriol (3:1),
and oxirane, cashew
nutshell liq.- and Pr
alc. -blocked.
P-18-0361A........... 4 5/18/2020 Lanxess Solutions, (S) Electrophoretic (S) Propanoic acid, 3-
US Inc. paint. hydroxy-2-
(hydroxymethyl)-2-
methyl-, polymer with
1,3,5-tris(6-
isocyanatohexyl)-1,3,5-
triazine-
2,4,6(1H,3H,5H)-
trione, 3,5-dimethyl-
1H-pyrazole-blocked.
P-18-0362A........... 2 5/18/2020 Lanxess Solutions, (S) Corrosion (S) 1,3-Propanediol, 2-
US Inc. protection coatings. ethyl-2-
(hydroxymethyl)-,
polymer with 2,4-
diisocyanato-1-methyl-
benzene, -hydro--
hydroxypoly[oxy(methyl-
1,2-ethanediyl)] and -
1,2,3-
propanetriyltris[-
hydroxypoly[oxy(methyl-
1,2-ethanediyl)]], Me
Et ketone oxime -
blocked.
P-18-0380A........... 7 5/7/2020 CBI................. (G) Automotive brake (G) Butanoic acid ethyl
parts (contained amine.
use).
P-18-0403A........... 4 5/22/2020 Clariant Plastics & (S) Dispersing agent (S) 2-Propenoic acid, 2-
Coatings USA, Inc. for pigments, methyl-, butyl ester,
paints, and coatings. polymer with 2-
(dimethylamino)ethyl 2-
methyl-2-propenoate
and 2-ethylhexyl 2-
methyl-2-propenoate.
P-18-0405A........... 5 5/20/2020 CBI................. (G) adhesive......... (S) Phenol, 4,4'-(1-
methylethylidene)bis-,
polymer with 3,6,9,12-
tetraoxatetradeca-1,13-
diene, glycidyl ether.
P-19-0041A........... 3 5/1/2020 CBI................. (G) Oil water (G) Alkyl diester,
separation. polymer with
(dialkylamino alkyl)
amine and
bis(halogenated alkyl)
ether.
P-19-0042A........... 3 5/1/2020 CBI................. (G) Oil water (G) Alkyl diester,
separation. polymer with
(dialkylamino alkyl)
amine and
bis(halogenated alkyl)
ether.
P-19-0043A........... 3 5/1/2020 CBI................. (G) Oil water (G) Alkyl dicarboxylic
separation. acid, polymer with
(dialkylamino alkyl)
amine and
bis(halogenated alkyl)
ether.
P-19-0044A........... 3 5/1/2020 CBI................. (G) Oil water (G) Alkyl
separation. bis(dialkylamino
alkyl) amide polymer
with bis(halogenated
alkyl) ether.
P-19-0053A........... 9 5/19/2020 Wacker Chemical (S) Used as a surface (S) 1-Butanamine, N-
Corporation. treatment, sealant, butyl-N-
caulk, and coating [(triethoxysilyl)methy
for mineral building l]-.
materials such as
concrete, brick,
limestone, and
plaster, as well as
on wood, metal and
other substrates.
[[Page 36847]]
P-19-0064A........... 7 3/27/2020 The Sherwin Williams (G) Polymeric film (G) 4,4'-
Company. former for coatings. methylenebis[2,6-
dimethyl phenol]
polymer with 2-
(chloromethyl)oxirane,
1,4-benzyl diol, 2-
methyl-2-propenoic
acid, butyl 2-methyl 2-
propenoate, ethyl 2-
methyl 2-propenoate,
and ethyl 2-
propenoate, reaction
products with 2-
(dimethylamino)
ethanol.
P-19-0064A........... 8 5/15/2020 The Sherwin Williams (G) Polymeric film (G) 4,4'-
Company. former for coatings. methylenebis[2,6-
dimethyl phenol]
polymer with 2-
(chloromethyl)oxirane,
1,4-benzyl diol, 2-
methyl-2-propenoic
acid, butyl 2-methyl 2-
propenoate, ethyl 2-
methyl 2-propenoate,
and ethyl 2-
propenoate, reaction
products with 2-
(dimethylamino)
ethanol.
P-19-0084A........... 3 5/13/2020 CBI................. (S) Flame retardant.. (S) DIphosphoric acid,
compd. with 1,3,5-
triazine-2,4,6-
triamine (1:2).
P-19-0109A........... 10 5/6/2020 Arch Chemicals, Inc. (G) The chemical is S) Copper, [[2,2',2''-
used as a component (nitrilo-
of a cleaning .kappa.N)tris[ethanola
formulation to to-.kappa.O]](2-)]-
improve the ;(S) Copper, bis[2-
wettability of the (amino-
overall cleaning .kappa.N)ethanolato-
solution on the .kappa.O]-;.
substrate.
P-19-0116A........... 5 5/26/2020 CBI................. (S) Silk protein for (G) sr-(Wasp Spider
production of fiber, Polypeptide-1
Skincare use as Oligopeptide-178).
additive in dermal
moisturizing lotions.
P-19-0153A........... 6 4/30/2020 Wego Chemical Group. (S) Raw material in (G) Dibromoalkyl ether
Flame Retardant Tetrabromobisphenol A.
product.
P-19-0153A........... 7 5/5/2020 Wego Chemical Group. (S) Raw material in (G) Dibromoalkyl ether
Flame Retardant Tetrabromobisphenol A.
product.
P-20-0005A........... 5 5/8/2020 RMC Advanced (G) Additive for (G) modified graphene.
Technologies, Inc. plastics and resins.
P-20-0010A........... 7 5/8/2020 CBI................. (G) Polymerization (G) Carboxylic acid,
auxiliary. reaction products with
metal hydroxide,
inorganic dioxide and
metal.
P-20-0015A........... 6 5/21/2020 GE Healthcare....... (S) The polymer is (G) N-alkyl
used in the heteromonocyclic
manufacture of diphenolamide, polymer
hollow fiber with Bisphenol A,
products. haloaryl-substituted
sulfone, compd. with
cyclic sulfonate
ester, polyaryl
alcohol terminated.
P-20-0036A........... 3 5/21/2020 Sigma-Aldrich Co., (G) Used in the (S) Carbonic acid,
LLC. manufacture of di(lithium-6Li) salt.
Lithium-6 Chloride.
P-20-0037A........... 4 5/21/2020 Sigma-Aldrich Co., (G) The material is (S) Lithium Chloride
LLC. used in (6LiCl).
manufacturing
devices for gamma
and neutron
radiation detection.
P-20-0047............ 6 5/14/2020 Nanosystems, Inc.... (S) Hydrophilic (G) Oxirane, 2-methyl-,
polyurethane polymer with oxirane,
prepolymer used to ether with
manufacture flexible propanetriol (3:1),
foams. polymer with poly(oxy-
1,2-ethanediyl) and
methylenebis[isocyanat
obenzene].
P-20-0062A........... 2 5/11/2020 Inabata America (S) Use as an (S) Multi-walled carbon
Corporation. electrically nanotubes; closed; 4.4-
conductive material, 12.8 nm diameter;
an additive in field bundle length 10.6-
emission 211.1 um; Grade:
applications, an Jenotube 6 (Substance-
additive in 1).
batteries, energy
storage, and
electrode
applications, an
additive to improve
physical or
mechanical
properties, an
additive for weight
reduction, a heat
generation and
dissipation material.
P-20-0063A........... 2 5/11/2020 Inabata America (S) Use as an (S) Multi-walled carbon
Corporation. electrically nanotubes; closed; 5.1-
conductive material, 11.6 nm diameter;
an additive in field bundle length 1.9-
emission 552.0 um; Grade:
applications, an Jenotube 8 (Substance-
additive in 2).
batteries, energy
storage, and
electrode
applications, an
additive to improve
physical or
mechanical
properties, an
additive for weight
reduction, a heat
generation and heat
dissipation material.
P-20-0064A........... 2 5/11/2020 Inabata America (S) Use as an (S) Multi-walled carbon
Corporation. additive in nanotubes; closed; 7.9-
batteries, energy 14.2 nm diameter;
storage, and bundle length 9.4-
electrode 106.4 um; Grade:
applications, an Jenotube 10 (Substance-
additive to improve 3).
physical or
mechanical
properties, an
additive for weight
reduction, a heat
generation and
dissipation
material, and
electrically
conductive material
and an additive in
field emission
applications.
P-20-0065A........... 2 5/11/2020 Inabata America (S) Use as an (S) Multi-walled carbon
Corporation. electrically nanotubes; closed;
conductive material, 17.0-34.7 nm diameter;
an additive in field globular shape; Grade:
emission Jenotube 20 (Substance-
applications, 4).
batteries, energy
storage, and
electrode
applications. Use as
an additive to
improve physical or
mechanical
properties, an
additive for weight
reduction, a heat
generation and heat
dissipation material.
P-20-0069A........... 3 5/15/2020 CBI................. (G) Surface-active (G) 2-Propenoic acid, 2-
chemical. methyl-, polymer with
2-hydroxyethyl 2-
methyl-2-propenoate
phosphate and 2-
propenoic acid salt,
peroxydisulfuric acid
([(HO)S(O)2]2O2)
sodium salt (1:2)- and
sodium (disulfite)
(2:1)-initiated.
[[Page 36848]]
P-20-0069A........... 4 5/16/2020 CBI................. (G) Surface-active (G) 2-Propenoic acid, 2-
chemical. methyl-, polymer with
2-hydroxyethyl 2-
methyl-2-propenoate
phosphate and 2-
propenoic acid salt,
peroxydisulfuric acid
([(HO)S(O)2]2O2)
sodium salt (1:2)- and
sodium (disulfite)
(2:1)-initiated.
P-20-0076A........... 2 5/21/2020 Cytec Industries, (G) Mining chemical.. (S) Glycine, reaction
Inc. products with sodium O-
iso-Pr
carbonodithioate,
sodium salts.
P-20-0085............ 5 5/7/2020 Luna Innovations, (S) Fluid resistant (G)
Inc. coatings. Bis(triethoxysilylprop
yl carbamate)
perfluoropolyether.
P-20-0085A........... 6 5/14/2020 Luna Innovations, (S) Fluid resistant (G)
Inc. coatings. Bis(triethoxysilylprop
yl carbamate)
perfluoropolyether.
P-20-0086A........... 3 5/11/2020 Daicel Chemtech, Inc (G) Component of (G) 2-Oxepanone,
polymers. homopolymer, ester
with hydroxyalkyl
trioxo
heteromonocyclic
(3:1).
P-20-0092............ 5 5/22/2020 CBI................. (G) Coloration of (G) Napthalenesulfonic
fabric. acid, amino-hydroxy-
bis [sulfo-
[(sulfooxy)ethyl]sulfo
nyl]phenyl]diazinyl]-,
potassium sodium salt.
P-20-0093............ 2 5/4/2020 Ashland, Inc........ (G) Coating.......... (G) Alkanoic acid, 3-
hetero-atom
substituted-2-
(heteroatom-
substituted alkyl)-2-
alkyl-, polymer with
1,2-alkanediamine,
alpha-hydro-omega-
heteroatom-substituted
poly(oxy-1,4-
alkanediyl) and 5-
hetero-atom
substituted- 1-
(heteroatom-
substituted alkyl)-1,
3, 3-
trialkylcycloalkane.
P-20-0093A........... 3 5/21/2020 Ashland, Inc........ (G) Coating.......... (G) Alkanoic acid, 3-
hetero-atom
substituted-2-
(heteroatom-
substituted alkyl)-2-
alkyl-, polymer with
1,2-alkanediamine,
alpha-hydro-omega-
heteroatom-substituted
poly(oxy-1,4-
alkanediyl) and 5-
hetero-atom
substituted- 1-
(heteroatom-
substituted alkyl)-1,
3, 3-
trialkylcycloalkane.
P-20-0094............ 1 4/29/2020 CBI................. (S) Formulation (G) Alkanedioic acid,
component in UV/EB polymer with tri-alkyl-
coatings, inks and isocyanatocarbomonocyc
3D printing/ le, dialkylglycols,
stereolithography/ ester with 2,3-
additive and dihydroxypropyl alkyl
Formulation ester, 2-hydroxyethyl
component in UV/EB methacrylate-blocked.
adhesive
manufacturing.
P-20-0095............ 1 5/4/2020 Evonik Corporation.. (S) Additive to (S) Siloxanes and
improve melt flow, Silicones, di-Me,
scratch resistance, [(phenylsilylidyne)tri
demoulding and lower s(oxy)]tris-, 3-(2-
COF of thermoplastic hydroxyethoxy)propyl
compounds. group-terminated,
triesters with 2-
oxepanone homopolymer.
P-20-0096............ 2 5/19/2020 CBI................. (G) Use in (G) Unsaturated
papermaking process. dicarboxylic acid
polymer with 2-
(dialkylamino)alkyl-
alkyl-alkanoate, N, N-
dialkyl-alkene amide,
2-propenamide and salt
of alkyl-substituted
alkene sulfonate.
P-20-0097............ 1 5/7/2020 Nelson Brothers, LLC (S) The PMN substance (G) Butanedioic acid,
will be used as an monopolyisobutylene
emulsifier for derivs., mixed
applications in dihydroxyalkyl and
explosives. hydroxyalkoxyalkyl
diesters.
P-20-0102............ 1 5/22/2020 Novihum (S) Fertilizer/Soil (S) Chemical Abstract
Technologies, Inc. amendment. (CA) index name: Coal,
brown, ammoxidized.
P-20-0104............ 2 5/26/2020 CBI................. (G) Additive......... (G) Alkenoic acid,
polymer with (alkyl
alkenyl) polyether.
SN-19-0006A.......... 4 5/13/2020 CBI................. (G) Component for 3D (S) 2-Propen-1-one, 1-
Printing (4-morpholinyl)-.
formulations.
SN-19-0006A.......... 5 5/15/2020 CBI................. (G) Component for 3D (S) 2-Propen-1-one, 1-
Printing (4-morpholinyl)-.
formulations.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90-day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 05/01/2020 to 05/31/2020
----------------------------------------------------------------------------------------------------------------
If amendment, type
Case No. Received date Commencement date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-00-0536...................... 05/27/2020 04/06/2020 N (G) Polyoxyalkylene
solution with
trimethylolpropane,
1,4 cyclohexane
dimethanol, cyclic
aliphatic anhydrides
and trimellitic
anhydride.
P-08-0378...................... 05/05/2020 04/21/2020 N (G) Arylalkylamine, n-
[4-[2-
(substitutedaryl)diaz
inyl]arylamino]-.
[[Page 36849]]
P-11-0581...................... 05/08/2020 12/18/2011 N (S) 1h-1,2,4-triazole-
5-acetic acid, 1-
acetyl-3-[4-(1,1-
dimethylethyl)phenyl]-
, 2,6-bis(1,1-
dimethylethyl)-4-
methylcyclohexyl
ester.
P-11-0582...................... 05/08/2020 12/19/2011 N (S) 1h-1,2,4-triazole-
5-acetic acid, 1-
acetyl-alpha-bromo-3-
[4-(1,1-
dimethylethyl)phenyl]-
, 2,6-bis(1,1-
dimethylethyl)-4-
methylcyclohexyl
ester.
P-14-0342...................... 05/07/2020 05/01/2020 N (G) Poly[oxy(methyl-1-
2-ethanedilyl)],
alpha-(2-propylalkyl)
)-omega-hydroxy-.
P-16-0445...................... 05/22/2020 05/21/2020 N (G) Carboxylic acids,
unsaturated,
hydrogenated polymers
with substituted
alkanediamine,
alkanediol,
substituted
alkylpropanoic acid,
alkanedioic acid and
substituted
isocyanatocycloalkane
, compds with
alkylamine.
P-16-0451...................... 05/29/2020 05/21/2020 N (G) Siloxane binder.
P-17-0191...................... 05/12/2020 04/12/2020 N (G) Alkyldiamine,
aminoalkyl
dimethylaminoalkyl
dimethyl-, reaction
products with
propylene oxide.
P-17-0345...................... 05/08/2020 05/07/2020 N (G) Alkanediol,
polymer with
alkylenebis(4-
isocyanatocarbomoncyc
le), alkylaminoalkyl
methacrylate-blocked.
P-17-0346...................... 05/13/2020 05/05/2020 N (G) Triarylalkyl
phosphonium halide
salt.
P-18-0092...................... 05/22/2020 03/06/2020 N (S) Tri-n-butyl methyl
phosphonium iodide.
P-18-0098...................... 04/30/2020 04/30/2020 N (G) Polyphosphoric
acids, polymers with
(alkoxyalkoxy)alkanol
and substituted
heteromonocycle.
P-18-0121...................... 05/26/2020 05/17/2020 N (S) Benzene, 1,1'-
oxybis-, branched
eicosyl derivs.
P-18-0341...................... 05/28/2020 05/12/2020 N (G) Alkane
dicarboxylic acid,
polymer with
alkoxylated
polyalcohol, alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-18-0342...................... 05/27/2020 05/11/2020 N (G) Alkane
dicarboxylic acid,
polymer with alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-19-0137...................... 05/04/2020 05/01/2020 N (S) Octadecene,
reaction products
with hexadecene,
hydrogenated.
P-19-0189...................... 05/01/2020 04/21/2020 N (S) Fatty acids, c18-
unsatd., dimers,
hydrogenated,
polymers with 1,6-
hexanediol and 1,1'-
methylenebis[4-
isocyanatobenzene].
P-20-0013...................... 05/05/2020 04/14/2020 N (S) 2-propenoic acid,
2-methyl-, (2-oxo-1,3-
dioxolan-4-yl)methyl
ester.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received from 05/01/2020 to 05/31/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-18-0155........................... 05/22/2020 Certificate of Analysis (G) Glycine, [acetylamino-
(Terasil Black W-S Box [(bromo-nitroaryl)azenyl]-
25KG). methoxyaryl]-(methoxy-
oxoethyl), alkyl ester.
L-20-0018........................... 05/19/2020 Alga, Growth Inhibition Test (S) Poly[oxy(methyl-1,2-
with Pseudokirchneriella ethanediyl)], .alpha.-[4-
subcapitata, 72 hours (OECD (ethenyloxy)butyl]-.omega.-
Test Guideline 201). hydroxyl-.
P-16-0462........................... 05/11/2020 Metals Analysis Report for (G) Silane-treated
Quarter 1 2020 (Method aluminosilicate.
6010B).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: June 8, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-13135 Filed 6-17-20; 8:45 am]
BILLING CODE 6560-50-P
