Certain New Chemicals; Receipt and Status Information for March 2020, 27998-28003 [2020-10101]
Download as PDF
<![CDATA[
jbell on DSKJLSW7X2PROD with NOTICES
27998
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
motions to intervene, and protests using
the Commission’s eFiling system at
https://www.ferc.gov/docs-filing/
efiling.asp. Commenters can submit
brief comments up to 6,000 characters,
without prior registration, using the
eComment system at https://
www.ferc.gov/docs-filing/
ecomment.asp. You must include your
name and contact information at the end
of your comments. For assistance,
please contact FERC Online Support at
FERCOnlineSupport@ferc.gov, (866)
208–3676 (toll free), or (202) 502–8659
(TTY). In lieu of electronic filing, please
send a paper copy to: Secretary, Federal
Energy Regulatory Commission, 888
First Street NE, Washington, DC 20426.
Hand delivered submissions in
docketed proceedings should be
delivered to Health and Human
Services, 12225 Wilkins Avenue,
Rockville, Maryland 20852. The first
page of any filing should include docket
number P–2188–245. Comments
emailed to Commission staff are not
considered part of the Commission
record.
The Commission’s Rules of Practice
and Procedure require all intervenors
filing documents with the Commission
to serve a copy of that document on
each person whose name appears on the
official service list for the project.
Further, if an intervenor files comments
or documents with the Commission
relating to the merits of an issue that
may affect the responsibilities of a
particular resource agency, they must
also serve a copy of the document on
that resource agency.
k. Description of Request:
NorthWestern proposes to amend its
license to operate, at its discretion and
to support grid reliability, the Ryan
Development of the Missouri-Madison
Hydroelectric Project to provide
baseload generation, short-term
reserves, load following generation, and
peaking by fluctuating the level of the
Ryan Reservoir in coordination with the
Cochrane and Morony Developments.
The proposed change to project
operations would result in up to one
foot above (to 3,038 feet) and eight feet
below (to 3,029 feet) the current full
pool elevation of 3,037 feet.
l. Locations of the Application: In
addition to publishing the full text of
this document in the Federal Register,
the Commission provides all interested
persons an opportunity to view and/or
print the contents of this document via
the internet through the Commission’s
Home Page (https://ferc.gov) using the
eLibrary link. Enter the docket number
excluding the last three digits in the
docket number field to access the
document. At this time, the Commission
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
has suspended access to the
Commission’s Public Reference Room,
due to the proclamation declaring a
National Emergency concerning the
Novel Coronavirus Disease (COVID–19),
issued by the President on March 13,
2020. For assistance, contact the Federal
Energy Regulatory Commission at
FERCOnlineSupport@ferc.gov or call
toll-free, (886) 208–3676 or TYY, (202)
502–8659.
m. Individuals desiring to be included
on the Commission’s mailing list should
so indicate by writing to the Secretary
of the Commission.
n. Comments, Protests, or Motions to
Intervene: Anyone may submit
comments, a protest, or a motion to
intervene in accordance with the
requirements of Rules of Practice and
Procedure, 18 CFR 385.210, .211, .214,
respectively. In determining the
appropriate action to take, the
Commission will consider all protests or
other comments filed, but only those
who file a motion to intervene in
accordance with the Commission’s
Rules may become a party to the
proceeding. Any comments, protests, or
motions to intervene must be received
on or before the specified comment date
for the particular application.
o. Filing and Service of Documents:
Any filing must (1) bear in all capital
letters the title COMMENTS, PROTEST,
or MOTION TO INTERVENE as
applicable; (2) set forth in the heading
the name of the applicant and the
project number of the application to
which the filing responds; (3) furnish
the name, address, and telephone
number of the person commenting,
protesting or intervening; and (4)
otherwise comply with the requirements
of 18 CFR 385.2001 through 385.2005.
All comments, motions to intervene, or
protests must set forth their evidentiary
basis. Any filing made by an intervenor
must be accompanied by proof of
service on all persons listed in the
service list prepared by the Commission
in this proceeding, in accordance with
18 CFR 385.2010.
Dated: May 6, 2020.
Kimberly D. Bose,
Secretary.
[FR Doc. 2020–10106 Filed 5–11–20; 8:45 am]
BILLING CODE 6717–01–P
PO 00000
Frm 00014
Fmt 4703
Sfmt 4703
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2020–0077; FRL–10008–
64]
Certain New Chemicals; Receipt and
Status Information for March 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
SUMMARY: EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 03/01/2020 to
03/31/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
June 11, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on commenting
E:\FR\FM\12MYN1.SGM
12MYN1
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
or visiting the docket, along with more
information about dockets generally, is
available at https://www.epa.gov/
dockets.
For
technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
FOR FURTHER INFORMATION CONTACT:
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
03/01/2020 to 03/31/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
jbell on DSKJLSW7X2PROD with NOTICES
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
PO 00000
Frm 00015
Fmt 4703
Sfmt 4703
27999
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995 (60 FR
25798) (FRL–4942–7)). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
E:\FR\FM\12MYN1.SGM
12MYN1
28000
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g. P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2020 TO 03/31/2020
jbell on DSKJLSW7X2PROD with NOTICES
Case no.
Received
date
Version
Manufacturer
Use
Chemical substance
DIC International
(USA) LLC.
CBI ............................
(G) Masking Photopolymer ..............
(G) Phenol formaldehyde glycidyl
ether acrylate cycloalkene ester.
(G) Oxyalkylene modified polyalkyl
amine alkyl diacid polymer with 2(chloromethyl)oxirane.
(G) Halogenated benzoic acid.
(S)
Butanoic
acid,
4(dimethylamino)-, ethyl ester.
(S) 1-Butanaminium, 4-amino-N-(2hydroxy-3-sulfopropyl)-N,
N-dimethyl-4-oxo-,
N-coco
alkyl
derivs., inner salts.
P–17–0110A ....
4
03/12/2020
P–17–0233A ....
4
03/09/2020
P–17–0414A ....
P–18–0059A ....
6
2
03/05/2020
03/10/2020
P–18–0060A ....
5
03/10/2020
P–18–0069A ....
3
03/09/2020
P–18–0143A ....
7
03/03/2020
P–18–0144A ....
6
03/03/2020
CBI ............................
P–18–0152A ....
6
03/06/2020
CBI ............................
P–18–0152A ....
7
03/06/2020
CBI ............................
P–18–0152A ....
8
03/11/2020
CBI ............................
P–18–0237A ....
9
02/28/2020
CBI ............................
(G) Anti-corrosive primer for outdoor
industrial applications.
(G) Intermediate for use in manufacturing.
(G) Intermediate for use in manufacturing.
(G) Intermediate for use in manufacturing.
(G) Use in print resins .....................
P–18–0292A ....
6
02/28/2020
CBI ............................
(G) Use in print resins .....................
P–18–0323A ....
7
03/02/2020
Kuraray America, Inc.
P–18–0326A ....
7
03/04/2020
CBI ............................
(G) Raw material for polymer manufacturing.
(G) Chemical Intermediate ..............
P–18–0330A ....
2
03/04/2020
CBI ............................
(G) Initiator .......................................
P–18–0376A ....
4
03/11/2020
P–18–0405A ....
4
03/05/2020
Sumitomo Chemical
Advanced Technologies LLC.
CBI ............................
(S) Substance used to improve
physical properties in rubber
products.
(G) Adhesive ....................................
P–19–0036A ....
3
03/11/2020
Ethox Chemicals,
LLC.
(S) As an additive to polymers for
improvement in gas barrier performance.
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
CBI ............................
Eastman Chemical
Company, Inc.
Eastman Chemical
Company, Inc.
Sasol Chemicals
(USA) LLC.
Huntsman International LLC.
PO 00000
Frm 00016
(S) Creping Aid for Yankee Dryers
to manufacture tissue and towel
paper.
(G) Monitor well performance ..........
(S) Chemical intermediate ...............
(S) Surfactant for Liquid Dish, Liquid Laundry, and Industrial Hand
Wash; Export only volume of the
TSCA manufactured NCS; and
FDA related uses.
(G) Polymer performance additive ..
(G) Anti-corrosive primer for outdoor
industrial applications.
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
(G) Surface modified boehmite.
(G) Fatty acids, tall-oil polymers
with aminoalkyl, dialkyl alkane
diamine, polyalkylene polyamine
alkanepolyamine fraction, and
tris-[(alkylamino) alkyl] phenol.
(G)Formaldehyde, polymer with an
alkane diamine and phenol.
(G) Hydrolyzed Functionalized Diamino Silanol Polymer.
(G) Hydrolyzed Functionalized Diamino Silanol Polymer.
(G) Hydrolyzed Functionalized Diamino Silanol Polymer.
(G) Alkanediol, polymer with 5isocyanato-1-(isocyanatomethyl)1,3,3-trimethylcyclohexane,
alkylaminoalkyl
methacrylate-,
and
dialkylheteromonocycleblocked.
(G) alkanediol, polymer with 5isocyanato-1-(isocyanatomethyl)1,3,3-trimethylcyclohexane,
alkylaminoalkylmethacrylateblocked.
(S) 2-Propenoic acid, 2-methyl-, 3methyl-3-buten-1-yl ester.
(G) Alkanoic acid, alkyl ester,
manuf. of, byproducts from, distn.
residues.
(G) Formaldehyde, polymer with
alkyl aryl ketone.
(G) Thiosulfuric acid, aminoalkyl
ester.
(S)
Phenol,
4,4’-(1methylethylidene)bis-,
polymer
with 3,6,9,12-tetraoxatetradeca1,13-diene, glycidyl ether.
(S) 1,4-Benzenedicarboxylic acid,
1,4-bis(2-phenoxyethyl) ester.
12MYN1
28001
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2020 TO 03/31/2020—Continued
jbell on DSKJLSW7X2PROD with NOTICES
Case no.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) As an additive to polymers for
improvement in gas barrier performance.
(G) Agricultural .................................
(S) Silk protein for production of
fiber, and Skincare use as additive in dermal moisturizing lotions.
(G) Intermediate ...............................
(G) Intermediate ...............................
(S)1,4-Benzenedicarboxylic
acid,
1,4-bis(2-phenoxyethyl) ester.
P–19–0036A ....
4
03/16/2020
Ethox Chemicals,
LLC.
P–19–0077A ....
P–19–0116 .......
11
4
03/13/2020
03/24/2020
CBI ............................
CBI ............................
P–19–0138A ....
P–19–0139A ....
3
2
03/13/2020
03/13/2020
CBI ............................
CBI ............................
P–19–0140A ....
P–19–0160A ....
3
2
03/13/2020
03/04/2020
CBI ............................
CBI ............................
(G) Intermediate ...............................
(S) Component of a UV curable
printing ink.
P–19–0161A ....
2
03/12/2020
CBI ............................
P–19–0174A ....
4
03/11/2020
P–20–0005A ....
4
03/05/2020
P–20–0010A ....
5
03/10/2020
International Lubricants, Inc.
RMC Advanced
Technologies, Inc.
CBI ............................
(S) Organic amine salt mixture used
as a foaming agent in the production of urethanes.
(G) Phosphorus antiwear compound
P–20–0011A ....
5
03/04/2020
CBI ............................
(G) Light stabilizer ...........................
P–20–0022A ....
3
03/05/2020
CBI ............................
P–20–0030A ....
2
03/13/2020
CBI ............................
P–20–0051A ....
3
03/11/2020
CBI ............................
P–20–0061 .......
1
03/03/2020
Allnex USA, Inc ........
(G) Fuel additive for combustion improver.
(S) Plasticizer for plastisols and in
caulks and sealants.
(S) Curing agent for Industrial
epoxy coating systems.
(S) Coating resin crosslinking agent
P–20–0062 .......
1
03/05/2020
Inabata America Corporation.
P–20–0063 .......
1
03/05/2020
Inabata America Corporation.
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
PO 00000
Frm 00017
(G) Additive for plastics and resins
(G) Polymerization auxiliary .............
(S) Use as an electrically conductive material, as an additive in
field emission applications, as an
additive in batteries, energy storage, and electrode applications,
as an additive to improve physical
or mechanical properties, as an
additive for weight reduction, and
as a heat generation material.
(S) Use as an electrically conductive material, as an additive in
field emission applications as an
additive in batteries, energy storage, and electrode applications,
as an additive to improve physical
or mechanical properties, as an
additive for weight reduction, as a
heat generation material, and as
a heat dissipation material.
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
(G) Alkenylamide.
(G)Sr-(WaspSpider
Polypeptide-1
Oligopeptide-178).
(G) Perfluorodioxaalkanoyl fluoride.
(G)
Perfluoro-2-methyltrioxaalkanoyl fluoride.
(G)Perfluorodioxaalkyl vinyl ether.
(G) Alkanesulfonic acid, 2-[(2aminoethyl)heteroatom-substituted]-, sodium salt (1:1), polymer
with
alpha-[2,2bis(hydroxymethyl)butyl]-omegamethoxypoly(oxy-1,2-ethanediyl)
and
1,1’-methylenebis[4isocyanatocyclohexane],
acrylic
acid-dipenthaerythritol
reaction
products- and polypropylene glycol ether with pentaerythritol (4:1)
triacrylate-blocked.
(G) Alkano1 amine salt mixture.
(G)
Octadecanoic
acid,
(alkylphosphinyl), polyol ester.
(G) modified graphene.
(G) Carboxylic acid, reaction products with metalhydroxide, inorganic dioxide and metal.
(G)
Tetraoxaspiro[5.5]alkyl-3,9diylbis(alkyl-2,1-diyl) bis(2-cyano3-(3,4-dimethoxyphenyl)acrylate).
(G) Polyalkoxycarbopolycycle hydroxy.
(G) Hexanedioic acid, alkyl ester.
(S)
1,8-Octanediamine,
4(aminomethyl)-, N-benzyl derivs.
(G) Formaldehyde, polymer with
alkylphenols, alkyl ether.
(S) Multi-walled carbon nanotubes;
closed; 4.4–12.8 nm diameter;
bundle length 10.6–211.1 um;
Grade: Jenotube 6 (Substance-1).
(S) Multi-walled carbon nanotubes;
closed; 5.1–11.6 nm diameter;
bundle length 1.9–552.0 um;
Grade: Jenotube 8 (Substance-2).
12MYN1
28002
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 03/01/2020 TO 03/31/2020—Continued
jbell on DSKJLSW7X2PROD with NOTICES
Case no.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) Multi-walled carbon nanotubes;
closed; 7.9–14.2 nm diameter;
bundle length 9.4–106.4 um;
Grade: Jenotube 10 (Substance3).
P–20–0064 .......
1
03/05/2020
Inabata America Corporation.
P–20–0065 .......
1
03/05/2020
Inabata America Corporation.
P–20–0066 .......
1
03/09/2020
CBI ............................
(S) Use as an electrically conductive material, as an additive in
field emission applications, as an
additive in batteries, energy storage, and electrode applications,
as an additive to improve physical
or mechanical properties, as an
additive for weight reduction, as a
heat generation material, and as
a heat dissipation material.
(S) Use as an electrically conductive material, as an additive in
field emission applications, as an
additive in batteries, energy storage, and electrode applications,
as an additive to improve physical
or mechanical properties, as an
additive for weight reduction, as a
heat generation material, and as
a heat dissipation material.
(G) Antiwear additive for lubricants
P–20–0067 .......
1
03/11/2020
Shepherd Chemical ..
(G) Catalyst and Additive ................
P–20–0068 .......
1
03/11/2020
CBI ............................
(G) Perfume .....................................
P–20–0069 .......
2
03/21/2020
CBI ............................
(G) Surface-active chemical ............
P–20–0070 .......
1
03/16/2020
Clariant Corporation
P–20–0072 .......
1
03/18/2020
CBI ............................
P–20–0074 .......
1
03/23/2020
Clariant Corporation
(S) Solvent for use in formulated
pesticide
products,
and
in
agrochemical adjuvant formulations.
(G) Additive used to impart specific
physicochemical properties to finished articles.
(S) Surfactant for use in the formulation of pesticide products.
P–20–0075 .......
1
03/24/2020
CBI ............................
(G) Pigment dispersant ....................
P–20–0076 .......
1
03/25/2020
Cytec Industries, Inc
(G) Mining chemical .........................
SN–19–0006A ..
3
03/05/2020
CBI ............................
(G) Component for 3D Printing formulations.
(S) Multi-walled carbon nanotubes;
closed; 17.0–34.7 nm diameters;
globular shape; Grade: Jenotube
20 (Substance-4).
(G) 2-Propenoic acid, 2-hydroxyethyl ester, reaction products with
dialkyl hydrogen heterosubstituted
phosphate and dimethyl phosphonate.
(S) Neodecanoic acid, zinc salt,
basic.
(S) 1,3-Propanediol, 2,2-dimethyl-,
1,3-diacetate.
(G) 2-Propenoic acid, 2-methyl-,
polymer with 2-hydroxyethyl 2methyl-2-propenoate phosphate
and
2-propenoic
acid
salt,
peroxydisulfuric
acid
([(HO)S(O)2]2O2) sodium salt
(1:2)- and sodium (disulfite) (2:1)initiated.
(S) Nonanamide, N,N-dimethyl-.
(G) Multi-walled carbon nanotubes.
(S) Oxirane, 2-methyl-, polymer with
oxirane,
monoundecyl
ether,
branched and linear.
(G)
Phenol,
4,4’-(1alkylalkylidene)bis-, polymer with
2-(2-aminoalkoxy)alcohol,2(chloroalkyl)oxirane,
N1,N1dialkyl-1,3-alkanediamine
and
.alpha-hydro-.omega.hydroxypoly[
oxy(alkyl-1,2alkanediyl)],
branched
4alkylphenyl
ethers,acetates
(salts).
(S) Glycine, reaction products with
sodium
O-iso-Pr
carbonodithioate,sodium salts.
(S)
2-Propen-1-one,
1-(4morpholinyl)-.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission
review.
In Table II of this unit, EPA provides
the following information (to the extent
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
that such information is not claimed as
CBI) on the NOCs that have passed an
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
initial screening by EPA during this
period: The EPA case number assigned
E:\FR\FM\12MYN1.SGM
12MYN1
Federal Register / Vol. 85, No. 92 / Tuesday, May 12, 2020 / Notices
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
28003
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 03/01/2020 TO 03/31/2020
Received date
Commencement
date
If amendment, type of
amendment
Chemical substance
P–13–0123 .....
P–15–0054A ..
03/20/2020
03/03/2020
03/16/2020
09/30/2015
N ...............................
Withdrew CBI claim ..
P–17–0184 .....
03/06/2020
02/11/2020
N ...............................
P–17–0325 .....
03/05/2020
03/05/2020
N ...............................
P–17–0414A ..
P–17–0450A ..
P–18–0016 .....
P–18–0172 .....
03/09/2020
03/09/2020
03/13/2020
03/04/2020
12/31/2019
12/31/2019
02/24/2020
11/06/2019
Withdrew CBI claim ..
Withdrew CBI claim ..
N ...............................
Withdrew CBI claim ..
P–19–0059 .....
03/02/2020
02/06/2020
N ...............................
P–19–0099 .....
03/02/2020
02/26/2020
N ...............................
(G) Salt of acidic polymers with monomeric and polymeric bases.
(S) Carbon nanotubes (70% single walled and 30% multi-walled
(double- or triple-walled) carbon nanotubes.
(S)
1-Propanaminium,
2-hydroxy-N,N-dimethyl-N-[3-[(1oxooctyl)amino]propyl]-3-sulfo-, inner salt.
(S) 2-Propenoic Acid, polymer with 2-methyl-2-((1-oxo2propenyl)amino)-1-propanesulfonic acid.
(S) Benzoic acid, 2,3,5 -trilfuoro.
(S) Benzoic acid, 2,3,4-trichloro-.
(G) Aromatic sulfonium tricyclo fluoroalkyl sulfonic acid salt.
(S) Calcium, carbonate 2-ethylhexanoate neodecanoate propionate complex.
(S) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-1-propen-1yl)oxy]ethyl
ester,
polymer
with
butyl
2-propenoate,
ethenylbenzene, 1,1′-[(1-methyl-1,2-ethanediyl)bis[oxy(methyl2,1-ethanediyl)]] di-2-propenoate, methyl 2-methyl-2-propenoate
and 2-methyl-2-propenoic acid, ammonium salt.
(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with dimethyl carbonate, 1,2-ethanediamine, 2- ethyl-2(hydroxymethyl)-1,3-propanediol, 1,6-hexanediol and 1,1′methylenebis[4-isocyanatocyclohexane], compd. with n,ndiethylethanamine.
Case No.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 03/01/2020 TO 03/31/2020
jbell on DSKJLSW7X2PROD with NOTICES
Case No.
Received date
Type of test information
P–14–0627 ......
03/11/2020
P–14–0627 ......
03/04/2020
P–16–0404 ......
03/09/2020
P–16–0543 ......
P–18–0303 ......
02/28/2020
03/11/2020
Chemical substance
Oral (Gavage) Prenatal Developmental Toxicity Study
of n-Butyl Pyrrolidone in New Zealand White Rabbits (OECD Test Guideline 414).
Draft: Oral (Gavage) Prenatal Developmental Toxicity
Study of n-Butyl Pyrrolidone in New Zealand White
Rabbits (OECD Test Guideline 414).
Acute Toxicity to the Zebra Fish, Determined Under
Static-Renewal Test Conditions (OCSPP Test
Guideline 850.1075).
Exposure Monitoring Report ........................................
Revised Aquatic Toxicity Acute Base set (OECD Test
Guideline 201, 202, 203).
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
(G) Cyclic amide.
(G) Cyclic amide.
(G) Alkyl ester, 2-({4-[2-(trisubstituted phenyl)azo]-5acetamido-2-substitutedphenyl}
(substituted
alkoxy)amino).
(G) Halogenophosphoric acid metal salt.
(G) 2-propenoic acid, polymer with aliphatic cyclic epoxide.
Dated: April 21, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
ENVIRONMENTAL PROTECTION
AGENCY
[See the Item Specific Docket Numbers
Provided in the Text; FRL–10008–53–OECA]
[FR Doc. 2020–10101 Filed 5–11–20; 8:45 am]
Proposed Information Collection
Requests; Comment Requests
BILLING CODE 6560–50–P
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
Authority: 15 U.S.C. 2601 et seq.
SUMMARY: The Environmental Protection
Agency is planning to submit the below
VerDate Sep<11>2014
18:47 May 11, 2020
Jkt 250001
PO 00000
Frm 00019
Fmt 4703
Sfmt 4703
E:\FR\FM\12MYN1.SGM
12MYN1
]]>Agencies
[Federal Register Volume 85, Number 92 (Tuesday, May 12, 2020)]
[Notices]
[Pages 27998-28003]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-10101]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10008-64]
Certain New Chemicals; Receipt and Status Information for March
2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 03/01/
2020 to 03/31/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before June 11, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html. Additional
instructions on commenting
[[Page 27999]]
or visiting the docket, along with more information about dockets
generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 03/01/2020 to 03/31/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
[[Page 28000]]
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 03/01/2020 to 03/31/2020
--------------------------------------------------------------------------------------------------------------------------------------------------------
Received
Case no. Version date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-17-0110A.................. 4 03/12/2020 DIC International (USA) (G) Masking Photopolymer........... (G) Phenol formaldehyde glycidyl
LLC. ether acrylate cycloalkene ester.
P-17-0233A.................. 4 03/09/2020 CBI...................... (S) Creping Aid for Yankee Dryers (G) Oxyalkylene modified polyalkyl
to manufacture tissue and towel amine alkyl diacid polymer with 2-
paper. (chloromethyl)oxirane.
P-17-0414A.................. 6 03/05/2020 CBI...................... (G) Monitor well performance....... (G) Halogenated benzoic acid.
P-18-0059A.................. 2 03/10/2020 Eastman Chemical Company, (S) Chemical intermediate.......... (S) Butanoic acid, 4-
Inc. (dimethylamino)-, ethyl ester.
P-18-0060A.................. 5 03/10/2020 Eastman Chemical Company, (S) Surfactant for Liquid Dish, (S) 1-Butanaminium, 4-amino-N-(2-
Inc. Liquid Laundry, and Industrial hydroxy-3-sulfopropyl)-N, N-
Hand Wash; Export only volume of dimethyl-4-oxo-, N-coco alkyl
the TSCA manufactured NCS; and FDA derivs., inner salts.
related uses.
P-18-0069A.................. 3 03/09/2020 Sasol Chemicals (USA) LLC (G) Polymer performance additive... (G) Surface modified boehmite.
P-18-0143A.................. 7 03/03/2020 Huntsman International (G) Anti-corrosive primer for (G) Fatty acids, tall-oil polymers
LLC. outdoor industrial applications. with aminoalkyl, dialkyl alkane
diamine, polyalkylene polyamine
alkanepolyamine fraction, and
tris-[(alkylamino) alkyl] phenol.
P-18-0144A.................. 6 03/03/2020 CBI...................... (G) Anti-corrosive primer for (G)Formaldehyde, polymer with an
outdoor industrial applications. alkane diamine and phenol.
P-18-0152A.................. 6 03/06/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di-
manufacturing. amino Silanol Polymer.
P-18-0152A.................. 7 03/06/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di-
manufacturing. amino Silanol Polymer.
P-18-0152A.................. 8 03/11/2020 CBI...................... (G) Intermediate for use in (G) Hydrolyzed Functionalized Di-
manufacturing. amino Silanol Polymer.
P-18-0237A.................. 9 02/28/2020 CBI...................... (G) Use in print resins............ (G) Alkanediol, polymer with 5-
isocyanato-1-(isocyanatomethyl)-
1,3,3-trimethylcyclohexane,
alkylaminoalkyl methacrylate-,
and dialkylheteromonocycle-
blocked.
P-18-0292A.................. 6 02/28/2020 CBI...................... (G) Use in print resins............ (G) alkanediol, polymer with 5-
isocyanato-1-(isocyanatomethyl)-
1,3,3-trimethylcyclohexane,
alkylaminoalkylmethacrylate-
blocked.
P-18-0323A.................. 7 03/02/2020 Kuraray America, Inc..... (G) Raw material for polymer (S) 2-Propenoic acid, 2-methyl-, 3-
manufacturing. methyl-3-buten-1-yl ester.
P-18-0326A.................. 7 03/04/2020 CBI...................... (G) Chemical Intermediate.......... (G) Alkanoic acid, alkyl ester,
manuf. of, byproducts from,
distn. residues.
P-18-0330A.................. 2 03/04/2020 CBI...................... (G) Initiator...................... (G) Formaldehyde, polymer with
alkyl aryl ketone.
P-18-0376A.................. 4 03/11/2020 Sumitomo Chemical (S) Substance used to improve (G) Thiosulfuric acid, aminoalkyl
Advanced Technologies physical properties in rubber ester.
LLC. products.
P-18-0405A.................. 4 03/05/2020 CBI...................... (G) Adhesive....................... (S) Phenol, 4,4'-(1-
methylethylidene)bis-, polymer
with 3,6,9,12-tetraoxatetradeca-
1,13-diene, glycidyl ether.
P-19-0036A.................. 3 03/11/2020 Ethox Chemicals, LLC..... (S) As an additive to polymers for (S) 1,4-Benzenedicarboxylic acid,
improvement in gas barrier 1,4-bis(2-phenoxyethyl) ester.
performance.
[[Page 28001]]
P-19-0036A.................. 4 03/16/2020 Ethox Chemicals, LLC..... (S) As an additive to polymers for (S)1,4-Benzenedicarboxylic acid,
improvement in gas barrier 1,4-bis(2-phenoxyethyl) ester.
performance.
P-19-0077A.................. 11 03/13/2020 CBI...................... (G) Agricultural................... (G) Alkenylamide.
P-19-0116................... 4 03/24/2020 CBI...................... (S) Silk protein for production of (G)Sr-(WaspSpider Polypeptide-1
fiber, and Skincare use as Oligopeptide-178).
additive in dermal moisturizing
lotions.
P-19-0138A.................. 3 03/13/2020 CBI...................... (G) Intermediate................... (G) Perfluorodioxaalkanoyl
fluoride.
P-19-0139A.................. 2 03/13/2020 CBI...................... (G) Intermediate................... (G) Perfluoro-2-methyl-
trioxaalkanoyl fluoride.
P-19-0140A.................. 3 03/13/2020 CBI...................... (G) Intermediate................... (G)Perfluorodioxaalkyl vinyl
ether.
P-19-0160A.................. 2 03/04/2020 CBI...................... (S) Component of a UV curable (G) Alkanesulfonic acid, 2-[(2-
printing ink. aminoethyl)heteroatom-
substituted]-, sodium salt (1:1),
polymer with alpha-[2,2-
bis(hydroxymethyl)butyl]-omega-
methoxypoly(oxy-1,2-ethanediyl)
and 1,1'-methylenebis[4-
isocyanatocyclohexane], acrylic
acid-dipenthaerythritol reaction
products- and polypropylene
glycol ether with pentaerythritol
(4:1) triacrylate-blocked.
P-19-0161A.................. 2 03/12/2020 CBI...................... (S) Organic amine salt mixture used (G) Alkano1 amine salt mixture.
as a foaming agent in the
production of urethanes.
P-19-0174A.................. 4 03/11/2020 International Lubricants, (G) Phosphorus antiwear compound... (G) Octadecanoic acid,
Inc. (alkylphosphinyl), polyol ester.
P-20-0005A.................. 4 03/05/2020 RMC Advanced (G) Additive for plastics and (G) modified graphene.
Technologies, Inc. resins.
P-20-0010A.................. 5 03/10/2020 CBI...................... (G) Polymerization auxiliary....... (G) Carboxylic acid, reaction
products with metalhydroxide,
inorganic dioxide and metal.
P-20-0011A.................. 5 03/04/2020 CBI...................... (G) Light stabilizer............... (G) Tetraoxaspiro[5.5]alkyl-3,9-
diylbis(alkyl-2,1-diyl) bis(2-
cyano-3-(3,4-
dimethoxyphenyl)acrylate).
P-20-0022A.................. 3 03/05/2020 CBI...................... (G) Fuel additive for combustion (G) Polyalkoxycarbopolycycle
improver. hydroxy.
P-20-0030A.................. 2 03/13/2020 CBI...................... (S) Plasticizer for plastisols and (G) Hexanedioic acid, alkyl ester.
in caulks and sealants.
P-20-0051A.................. 3 03/11/2020 CBI...................... (S) Curing agent for Industrial (S) 1,8-Octanediamine, 4-
epoxy coating systems. (aminomethyl)-, N-benzyl derivs.
P-20-0061................... 1 03/03/2020 Allnex USA, Inc.......... (S) Coating resin crosslinking (G) Formaldehyde, polymer with
agent. alkylphenols, alkyl ether.
P-20-0062................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes;
Corporation. conductive material, as an closed; 4.4-12.8 nm diameter;
additive in field emission bundle length 10.6-211.1 um;
applications, as an additive in Grade: Jenotube 6 (Substance-1).
batteries, energy storage, and
electrode applications, as an
additive to improve physical or
mechanical properties, as an
additive for weight reduction, and
as a heat generation material.
P-20-0063................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes;
Corporation. conductive material, as an closed; 5.1-11.6 nm diameter;
additive in field emission bundle length 1.9-552.0 um;
applications as an additive in Grade: Jenotube 8 (Substance-2).
batteries, energy storage, and
electrode applications, as an
additive to improve physical or
mechanical properties, as an
additive for weight reduction, as
a heat generation material, and as
a heat dissipation material.
[[Page 28002]]
P-20-0064................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes;
Corporation. conductive material, as an closed; 7.9-14.2 nm diameter;
additive in field emission bundle length 9.4-106.4 um;
applications, as an additive in Grade: Jenotube 10 (Substance-3).
batteries, energy storage, and
electrode applications, as an
additive to improve physical or
mechanical properties, as an
additive for weight reduction, as
a heat generation material, and as
a heat dissipation material.
P-20-0065................... 1 03/05/2020 Inabata America (S) Use as an electrically (S) Multi-walled carbon nanotubes;
Corporation. conductive material, as an closed; 17.0-34.7 nm diameters;
additive in field emission globular shape; Grade: Jenotube
applications, as an additive in 20 (Substance-4).
batteries, energy storage, and
electrode applications, as an
additive to improve physical or
mechanical properties, as an
additive for weight reduction, as
a heat generation material, and as
a heat dissipation material.
P-20-0066................... 1 03/09/2020 CBI...................... (G) Antiwear additive for (G) 2-Propenoic acid, 2-
lubricants. hydroxyethyl ester, reaction
products with dialkyl hydrogen
heterosubstituted phosphate and
dimethyl phosphonate.
P-20-0067................... 1 03/11/2020 Shepherd Chemical........ (G) Catalyst and Additive.......... (S) Neodecanoic acid, zinc salt,
basic.
P-20-0068................... 1 03/11/2020 CBI...................... (G) Perfume........................ (S) 1,3-Propanediol, 2,2-dimethyl-
, 1,3-diacetate.
P-20-0069................... 2 03/21/2020 CBI...................... (G) Surface-active chemical........ (G) 2-Propenoic acid, 2-methyl-,
polymer with 2-hydroxyethyl 2-
methyl-2-propenoate phosphate and
2-propenoic acid salt,
peroxydisulfuric acid
([(HO)S(O)2]2O2) sodium salt
(1:2)- and sodium (disulfite)
(2:1)-initiated.
P-20-0070................... 1 03/16/2020 Clariant Corporation..... (S) Solvent for use in formulated (S) Nonanamide, N,N-dimethyl-.
pesticide products, and in
agrochemical adjuvant formulations.
P-20-0072................... 1 03/18/2020 CBI...................... (G) Additive used to impart (G) Multi-walled carbon nanotubes.
specific physicochemical
properties to finished articles.
P-20-0074................... 1 03/23/2020 Clariant Corporation..... (S) Surfactant for use in the (S) Oxirane, 2-methyl-, polymer
formulation of pesticide products. with oxirane, monoundecyl ether,
branched and linear.
P-20-0075................... 1 03/24/2020 CBI...................... (G) Pigment dispersant............. (G) Phenol, 4,4'-(1-
alkylalkylidene)bis-, polymer
with 2-(2-aminoalkoxy)alcohol,2-
(chloroalkyl)oxirane, N1,N1-
dialkyl-1,3-alkanediamine and
.alpha-hydro-.omega.-hydroxypoly[
oxy(alkyl-1,2-alkanediyl)],
branched 4-alkylphenyl
ethers,acetates (salts).
P-20-0076................... 1 03/25/2020 Cytec Industries, Inc.... (G) Mining chemical................ (S) Glycine, reaction products
with sodium O-iso-Pr
carbonodithioate,sodium salts.
SN-19-0006A................. 3 03/05/2020 CBI...................... (G) Component for 3D Printing (S) 2-Propen-1-one, 1-(4-
formulations. morpholinyl)-.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned
[[Page 28003]]
to the NOC including whether the submission was an initial or amended
submission, the date the NOC was received by EPA, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table II--NOCs Approved * From 03/01/2020 to 03/31/2020
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type
Case No. Received date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-13-0123............. 03/20/2020 03/16/2020 N.................. (G) Salt of acidic polymers with
monomeric and polymeric bases.
P-15-0054A............ 03/03/2020 09/30/2015 Withdrew CBI claim. (S) Carbon nanotubes (70% single
walled and 30% multi-walled
(double- or triple-walled)
carbon nanotubes.
P-17-0184............. 03/06/2020 02/11/2020 N.................. (S) 1-Propanaminium, 2-hydroxy-
N,N-dimethyl-N-[3-[(1-
oxooctyl)amino]propyl]-3-sulfo-,
inner salt.
P-17-0325............. 03/05/2020 03/05/2020 N.................. (S) 2-Propenoic Acid, polymer
with 2-methyl-2-((1-oxo-
2propenyl)amino)-1-
propanesulfonic acid.
P-17-0414A............ 03/09/2020 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,3,5 -
trilfuoro.
P-17-0450A............ 03/09/2020 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,3,4-trichloro-
.
P-18-0016............. 03/13/2020 02/24/2020 N.................. (G) Aromatic sulfonium tricyclo
fluoroalkyl sulfonic acid salt.
P-18-0172............. 03/04/2020 11/06/2019 Withdrew CBI claim. (S) Calcium, carbonate 2-
ethylhexanoate neodecanoate
propionate complex.
P-19-0059............. 03/02/2020 02/06/2020 N.................. (S) Butanoic acid, 3-oxo-, 2-[(2-
methyl-1-oxo-1-propen-1-
yl)oxy]ethyl ester, polymer with
butyl 2-propenoate,
ethenylbenzene, 1,1'-[(1-methyl-
1,2-ethanediyl)bis[oxy(methyl-
2,1-ethanediyl)]] di-2-
propenoate, methyl 2-methyl-2-
propenoate and 2-methyl-2-
propenoic acid, ammonium salt.
P-19-0099............. 03/02/2020 02/26/2020 N.................. (S) Propanoic acid, 3-hydroxy-2-
(hydroxymethyl)-2-methyl-,
polymer with dimethyl carbonate,
1,2-ethanediamine, 2- ethyl-2-
(hydroxymethyl)-1,3-propanediol,
1,6-hexanediol and 1,1'-
methylenebis[4-
isocyanatocyclohexane], compd.
with n,n-diethylethanamine.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 03/01/2020 to 03/31/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-14-0627..................... 03/11/2020 Oral (Gavage) Prenatal (G) Cyclic amide.
Developmental Toxicity Study
of n-Butyl Pyrrolidone in New
Zealand White Rabbits (OECD
Test Guideline 414).
P-14-0627..................... 03/04/2020 Draft: Oral (Gavage) Prenatal (G) Cyclic amide.
Developmental Toxicity Study
of n-Butyl Pyrrolidone in New
Zealand White Rabbits (OECD
Test Guideline 414).
P-16-0404..................... 03/09/2020 Acute Toxicity to the Zebra (G) Alkyl ester, 2-({4-[2-
Fish, Determined Under Static- (trisubstituted phenyl)azo]-5-
Renewal Test Conditions (OCSPP acetamido-2-
Test Guideline 850.1075). substitutedphenyl{time}
(substituted alkoxy)amino).
P-16-0543..................... 02/28/2020 Exposure Monitoring Report..... (G) Halogenophosphoric acid
metal salt.
P-18-0303..................... 03/11/2020 Revised Aquatic Toxicity Acute (G) 2-propenoic acid, polymer
Base set (OECD Test Guideline with aliphatic cyclic epoxide.
201, 202, 203).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: April 21, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-10101 Filed 5-11-20; 8:45 am]
BILLING CODE 6560-50-P
