Certain New Chemicals; Receipt and Status Information for February 2020, 16335-16340 [2020-06063]
Download as PDF
<![CDATA[
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
jbell on DSKJLSW7X2PROD with NOTICES
Office of Pollution Prevention and
Toxics, Environmental Protection
Agency, Mail Code 7406M, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
343–9924; email address: rutsch.linda@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Does this action apply to me?
You may be potentially affected by
this action if you are a Safer Choice
program partner or stakeholder. The
following list of North American
Industrial Classification System
(NAICS) codes is not intended to be
exhaustive, but rather provides a guide
to help readers determine whether this
document applies to them. Potentially
affected entities may include:
• Other Basic Inorganic Chemical
Manufacturing (NAICS code 325180);
• All Other Basic Organic Chemical
Manufacturing (Primary) (NAICS code
325199);
• Pesticide and Other Agricultural
Chemical Manufacturing (NAICS code
325320);
• Paint and Coating Manufacturing
(NAICS code 325510);
• Adhesive Manufacturing (NAICS
code 325520);
• Soap and Other Detergent
Manufacturing (NAICS code 325611);
• Polish and Other Sanitation Good
Manufacturing (NAICS code 325612);
• Surface Active Agent
Manufacturing (Primary) (NAICS code
325613);
• Toilet Preparation Manufacturing
(NAICS code 325620);
• Photographic Film, Paper, Plate,
and Chemical Manufacturing (NAICS
code 325992);
• All Other Miscellaneous Chemical
Product and Preparation Manufacturing
(NAICS code 325998);
• Service Establishment Equipment
and Supplies Merchant Wholesalers
(Primary) (NAICS code 423850);
• Other Chemical and Allied
Products Merchant Wholesalers
(Primary) (NAICS code 424690);
• Supermarkets and Other Grocery
(except Convenience) Stores (Primary)
(NAICS code 445110);
• All Other Specialty Food Stores
(NAICS code 445299);
• Pharmacies and Drug Stores (NAICS
code 446110);
• Office Supplies and Stationery
Stores (NAICS code 453210);
• All Other Miscellaneous Store
Retailers (except Tobacco Stores)
(Primary) (NAICS code 453998);
• Electronic Shopping and MailOrder Houses (NAICS code 454110);
• Research and Development in
Biotechnology (except
VerDate Sep<11>2014
17:26 Mar 20, 2020
Jkt 250001
Nanobiotechnology) (Primary) (NAICS
code 541714);
• Facilities Support Services (NAICS
code 561210);
• Janitorial Services (NAICS code
561720);
• Carpet and Upholstery Cleaning
Services (NAICS code 561740);
• Elementary and Secondary Schools
(NAICS code 611110);
• Colleges, Universities, and
Professional Schools (NAICS code
611310);
• Promoters of Performing Arts,
Sports, and Similar Events with
Facilities (NAICS code 711310);
• Drycleaning and Laundry Services
(NAICS code 8123);
• Civic and Social Organizations
(Primary) (NAICS code 813410);
• Business Associations (Primary)
(NAICS code 813910);
• Administration of Air and Water
Resource and Solid Waste Management
Programs (Primary) (NAICS code
924110); and
• Other General Government Support
(NAICS code 921190).
II. Background
As part of its environmental mission,
the Safer Choice program partners with
businesses to help consumers and
commercial buyers identify products
with safer chemical ingredients, without
sacrificing quality or performance.
Toward this end, the Safer Choice
program certifies products containing
ingredients that have met the program’s
specific and rigorous human health and
environmental toxicological criteria.
The Safer Choice program allows the
use of its label on products that perform
and contain safer ingredients, as
determined by expert evaluation. The
Safer Choice program recognition
represents a high level of achievement
in formulating products that are safer for
people and the environment. The
purpose of the Partner of the Year
Awards is to recognize the leadership
contributions of Safer Choice partners
and stakeholders who, over the past
year, have shown achievement in the
design, manufacture, selection, and use
of products with safer chemicals, which
furthers outstanding or innovative
source reduction.
III. How can I participate?
To be considered for a Partner of the
Year Award, candidates should notify
the Safer Choice program of their
interest. They should submit supporting
information on their accomplishments
and contributions focusing on calendar
year 2019. There is no form associated
with this year’s application. Candidates
interested in learning more about the
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
16335
Safer Choice Partner of the Year Awards
should refer to the Safer Choice website:
https://www.epa.gov/saferchoice/saferchoice-partner-year-awards.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 17, 2020.
Alexandra Dapolito Dunn,
Assistant Administrator, Office of Chemical
Safety and Pollution Prevention.
[FR Doc. 2020–06072 Filed 3–20–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2020–0077; FRL–10006–
61]
Certain New Chemicals; Receipt and
Status Information for February 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 02/01/2020 to
02/29/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
April 22, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
SUMMARY:
E:\FR\FM\23MRN1.SGM
23MRN1
16336
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (MC 7407M), Office of
Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
jbell on DSKJLSW7X2PROD with NOTICES
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
02/01/2020 to 02/29/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
VerDate Sep<11>2014
17:26 Mar 20, 2020
Jkt 250001
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
E:\FR\FM\23MRN1.SGM
23MRN1
16337
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g. P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2020 TO 02/29/2020
jbell on DSKJLSW7X2PROD with NOTICES
Case No.
Version
Received date
Manufacturer
Use
(G) Directing agent .....................................
(G) A chemical reactant used in manufacturing a polymer.
(G) Microlithography for electronic device
manufacturing.
(G) Site intermediate ..................................
(G) Microlithography for electronic device
manufacturing.
(G) Microlithography for electronic device
manufacturing.
P–16–0424A .............
P–16–0425A .............
4
5
02/18/2020
02/05/2020
Sachem Inc ..............
CBI ...........................
P–17–0178A .............
5
02/26/2020
Shin-Etsu Microsi .....
P–17–0355A .............
P–18–0013A .............
7
3
02/05/2020
02/26/2020
CBI ...........................
Shin-Etsu Microsi .....
P–18–0014A .............
3
02/26/2020
Shin-Etsu Microsi .....
P–18–0037A .............
2
02/26/2020
Shin-Etsu Microsi .....
P–18–0151A .............
9
02/04/2020
Struers Inc ...............
P–18–0154A .............
8
02/19/2020
CBI ...........................
P–18–0211A .............
2
02/17/2020
Patcham USA LLC ..
P–18–0273A .............
5
02/05/2020
CBI ...........................
P–18–0283A .............
6
02/21/2020
CBI ...........................
P–18–0289A .............
4
02/13/2020
CBI ...........................
P–18–0290A .............
4
02/13/2020
CBI ...........................
P–18–0302A .............
P–18–0323A .............
5
5
02/15/2020
02/25/2020
CBI ...........................
Kuraray America, Inc
P–18–0323A .............
6
02/28/2020
Kuraray America, Inc
P–18–0326A .............
6
02/24/2020
CBI ...........................
P–18–0379A .............
2
02/11/2020
CBI ...........................
P–18–0387A .............
2
02/06/2020
CBI ...........................
P–18–0388A .............
2
02/06/2020
CBI ...........................
P–19–0053A .............
7
02/28/2020
Wacker Chemical
Corporation.
VerDate Sep<11>2014
17:26 Mar 20, 2020
Jkt 250001
PO 00000
Frm 00025
Chemical substance
(G) Tetraalkylpiperidinium hydroxide.
(G) amino-silane.
(G) Sulfonium, triphenyl-, salt with substituted-alkyl 4-substituted-benzoate.
(G) Benzoic acid, 2-hydroxy-, -alkyl derivs.
(G) Substituted-triphenylsulfonium, inner
salt.
(G) Sulfonium, triphenyl-, salt with
disubstituted-heterocyclic compound
(1:1).
(G) Microlithography for electronic device
(G) Sulfonium, triphenyl-, salt with 2,4,5manufacturing.
trisubstituted-benzenesulfonate (1:1).
(S) A curing agent for curing epoxy sys(S) Formaldehyde, reaction products with
tems.
1,3-benzenedimethanamine and p-tertbutylphenol.
(G) Crosslinking agent for coatings ........... (G) Isocyanic acid,
polyalkylenepolycycloalkylene ester, 2alkoxy alkanol and 1-alkoxy alkanol and
alkylene diol blocked.
(S) Wetting and dispersing agent for pig(G) Alkaneamine, (aminoalkyl)-, polymer
ment formulations, paints, and coatings.
with aziridine and 1,6diisocyanatohexane, polyethylene glycol
alkyl ether- and polyethylene-polypropylene glycol aminoalkyl alkyl etherand alkenyl benzenated polyethylene
glycol Ph ether.
(G) Used in polymer manufacturing ........... (S) 1,4-Cyclohexanedicarboxylic acid, 1,4bis(2-ethylhexyl) ester.
(G) Open, non-dispersive use .................... (G) Hydroxy alkanoic acid, compds. with
aminoalkoxyalcohol-epoxy polymeralkanolamine reaction products.
(G) Gas scrubbing, (G) landfill
(G) 2-(2(methylcaboxymonocyclic)
deoderizing, (G) wastewater deoderizing.
amino)ethoxy)-alcohol.
(G) wastewater deodorizing, (G) Gas
(G) Carbomonocylic-oxazolidine.
scrubbing, (G) Landfill odor neutralizing.
(G) Chemical intermediate ......................... (S) D-glucaric acid, ammonium salt (1:1).
(G) Raw material for polymer manufac(S) 2-Propenoic acid, 2-methyl-, 3-methylturing.
3-buten-1-yl ester.
(G) Raw material for polymer manufac(S) 2-Propenoic acid, 2-methyl-, 3-methylturing.
3-buten-1-yl ester.
(G) Chemical Intermediate ......................... (G) Alkanoic acid, alkyl ester, manuf. of,
byproducts from, distn. residues.
(G) Hardener for waterborne epoxy sys(G) Cashew nutshell liquid polymer with
tem.
Epichlorohydrin, formaldehyde, phenol,
amines and glycol.,
(G) Plastic Additive .................................... (G) Alkanal, reaction products with
alkanediyl bis[alkyl-tris(alkylheterocycle)-1,3,5-triazine-2,4,6-triamine
and hydrogen peroxide.
(G) Plastic additive ..................................... (G) 1,3,5-triazine-2,4,6-triamine, alkanediyl
bis[alkyl-tris(alkyl-heterocycle)-, allyl
derivs., oxidized, hydrogenated.
(S) Used as a surface treatment, sealant,
(S) 1-Butanamine, N-butyl-Ncaulk, and coating for mineral building
[(triethoxysilyl)methyl]materials such as concrete, brick, limestone, and plaster, as well as on wood,
metal and other substrates.
Fmt 4703
Sfmt 4703
E:\FR\FM\23MRN1.SGM
23MRN1
16338
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2020 TO 02/29/2020—Continued
jbell on DSKJLSW7X2PROD with NOTICES
Case No.
Version
Received date
Manufacturer
Use
Chemical substance
(G) 4,4′-methylenebis[2,6-dimethyl phenol]
polymer with 2-(chloromethyl)oxirane,
1,4-benzyl diol, 2-methyl-2-propenoic
acid, butyl 2-methyl 2-propenoate, ethyl
2-methyl 2-propenoate, and ethyl 2propenoate, reaction products with 2(dimethylamino) ethanol.
(G) Alkenylamide.
(G) Aliphatic hydrocarbons, C16-18branched and linear.
(S) Ethanamine, N-ethyl-, 2-hydroxy-1,2,3propanetricarboxylate (1:?).
(S) Copper, [[2,2′,2″-(nitrilo.kappa.N)tris[ethanolato-.kappa.O]](2-)](S) Copper, bis[2-(amino.kappa.N)ethanolato-.kappa.O]-;
(G) Heteroatom-substituted alkyl
triethoxysilane, reaction products with
methylated formaldehyde-melamine
polymer.
P–19–0064A .............
6
02/21/2020
The Sherwin Williams Company.
(G) Polymeric film former for coatings .......
P–19–0077A .............
P–19–0085A .............
10
3
02/19/2020
02/18/2020
CBI ...........................
Neste oil US, Inc ......
P–19–0088A .............
4
02/26/2020
CBI ...........................
(G) Agricultural ...........................................
(G) The PMN substance will be used as a
functional fluid in electrical equipment.
(G) Feedstock for amine recovery .............
P–19–0109A .............
8
02/20/2020
Arch Chemicals, Inc
(G) A component of a cleaning formulation
to improve the wettability of the overall
cleaning solution on the substrate.
P–19–0170A .............
2
02/06/2020
CBI ...........................
P–20–0008A .............
2
02/13/2020
Archroma U.S., Inc ..
(S) Coupling agent in elastomer-based formulations that will be used in molding
operations to manufacture different
types of rubber articles including but not
limited to rubber tires.
(S) Dye for use with paper, paper products, and nonwoven products produced
from paper.
P–20–0010A .............
4
02/21/2020
CBI ...........................
(G) Polymerization auxiliary .......................
P–20–0012A .............
6
02/07/2020
CBI ...........................
(G) Ink Additive ..........................................
P–20–0013A .............
2
02/17/2020
Arkema Inc ...............
(G) UV curable inks ...................................
P–20–0015A .............
5
02/05/2020
GE Healthcare .........
(S) Used in the manufacture of hollow
fiber products.
P–20–0024A .............
4
02/21/2020
CBI ...........................
(G) Dispersant polymer for coatings ..........
P–20–0026A .............
4
02/04/2020
GE Healthcare .........
P–20–0026A .............
5
02/05/2020
GE Healthcare .........
P–20–0026A .............
6
02/06/2020
GE Healthcare .........
P–20–0036 ................
2
02/06/2020
P–20–0037 ................
3
02/12/2020
P–20–0043 ................
4
02/23/2020
Sigma-Aldrich Co
LLC.
Sigma-Aldrich Co
LLC.
Saproterra ................
(S) The new monomer is isolated and
used for subsequent polymerization.
(S) The new monomer is isolated and
used for subsequent polymerization.
(S) The new monomer is isolated and
used for subsequent polymerization.
(G) Used in the manufacture of Lithium-6
Chloride.
(G) Used in manufacturing devices for
gamma and neutron radiation detection.
(S) Soil and Plant amendment ...................
P–20–0044A .............
2
02/21/2020
Angus Chemical
Company.
P–20–0045 ................
2
02/27/2020
Torrecid USA LLC ...
P–20–0050 ................
2
02/05/2020
CBI ...........................
(G) Curing additive: Automotive paint, (G)
Neutralization, stability and pigment
dispersancy in industrial latex paints,
(G) Neutralization, solubilization and stability in commercial waterborne and solvent borne coatings and varnishes used
for wood, metal, composites and other
substrates, (G) Solubilizer for high acid
value styrene acrylic polymers for use in
ink applications, (G) Additive for industrial polyurethane dispersions.
(G) Raw material in ceramic tiles production.
(G) Additive in consumer products ............
P–20–0050A .............
3
02/20/2020
CBI ...........................
(G) Additive in consumer products ............
P–20–0051A .............
2
02/07/2020
CBI ...........................
P–20–0052 ................
1
02/05/2020
Evonik Corporation ..
(S) Curing agent for Industrial epoxy coating systems.
(S) Liquid shrinkage reducing admixture
for concrete.
P–20–0054 ................
1
02/07/2020
CBI ...........................
VerDate Sep<11>2014
17:26 Mar 20, 2020
Jkt 250001
PO 00000
Frm 00026
(G) Catalyst is used in a closed process ...
Fmt 4703
Sfmt 4703
E:\FR\FM\23MRN1.SGM
(G) 7-Heteropolycyclicsulfonic acid, 2-[4[2-[1-[[(2-methoxy-5-methyl-4sulfophenyl)amino]carbonyl]-2oxopropyl]diazenyl]phenyl]-6-methyl-,
compd. with (alkylamino)alkanol and
(hydroxyalkyl)amine.
(G) Carboxylic acid, reaction products with
metal hydroxide, inorganic dioxide and
metal.
(G) Polyol, polymer with alkyl
diisocyanate, alkyl substituted
heterocycle blocked.
(S) 2-Propenoic acid, 2-methyl-, (2-oxo1,3-dioxolan-4-yl)methyl ester.
(G) N-alkyl heteromonocyclic
diphenolamide, polymer with Bisphenol
A, haloaryl-substituted sulfone, compd.
with cyclic sulfonate ester, polyaryl alcohol terminated.
(G) Phenol-formaldehyde polymer with
amino-oxirane copolymer and
nitrobenzoates.
(G) N-alkyl heteromonocyclic
diphenolamide.
(G) N-alkyl heteromonocyclic
diphenolamide.
(G) N-alkyl heteromonocyclic
diphenolamide.
(S) Carbonic acid, di(lithium-6Li) salt.
(S) Lithium Chloride (6LiCl).
(S) Acetic acid, 2-[[3-(4-pyridinyl)-1H-1,2,4triazol-5-yl]thio]-, compd. with 2aminoethanol (1:1).
(S) 1-Propanamine, 3-methoxy-N,N-dimethyl.
(S) Iron oxide (Fe2O3), mixed with silica,
calcined.
(S) Benzenepentanol, alpha, gammadimethyl(S) Benzenepentanol, alpha, gammadimethyl(S) 1,8-Octanediamine, 4-(aminomethyl)-,
N-benzyl derivs.
(S) Oxirane, 2-methyl-, polymer with
oxirane, mono(3,5,5trimethylhexanoate).
(S) Nitrile hydratase.
23MRN1
16339
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 02/01/2020 TO 02/29/2020—Continued
Manufacturer
Use
Chemical substance
P–20–0056 ................
Case No.
Version
2
Received date
02/12/2020
CBI ...........................
(G) Pigment dispersant ..............................
P–20–0057 ................
1
02/11/2020
P–20–0058 ................
2
02/19/2020
Nusil Technology
LLC.
CBI ...........................
(G) Silane coupling agent used in silicone
formulations.
(G) Additive for automatic dishwashing,
(G) Additive for hard surface cleaner.
(G) Polyphosphoric acids, 2-[(alkyl-1-oxoalkene-1-yl)oxy]alkyl esters, polymers
with acrylic acid, alkyl acrylate, alkyl
methacrylate, hydroxyalkyl methacrylate
and carbomonocycle, 2,2′-(1,2diazenediyl)bis[2,4dialkylalkanenitrogensubstituted]-initiated.
(G) Arene, trimethoxysilyl-, hydrolyzed.
P–20–0059 ................
3
02/28/2020
CBI ...........................
(S) Colorant for thermoplastic resins .........
SN–20–0001 .............
1
02/05/2020
CBI ...........................
(G) Carrier fluids, (G) Precision and general cleaning, (G) Aerosol solvent.
(G) Polysaccharide, polymer with unsaturated carboxylic acid and
methacryloxyethyltrimethyl ammonium
chloride, sodium salt, acid salt initiated.
(G) Propanedinitrile, 2-[[4-[ethyl[2-[4-(substitute methyl
butyl)phenoxy]ethyl]amino]-2methylphenyl]methylene].
(S) 2-Butene, 1,1,1,4,4,4-hexafluoro-, (2Z)-
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED* FROM 02/01/2020 TO 02/29/2020
Case No.
Received date
Commencement
date
If amendment, type of amendment
Chemical Substance
(G) 2-alkenoic acid, 2-alkyl-, polymer with alkyl 2-alkyl alkanoate, vinyl
carbomonocycle, alkyl alkanoate and alkanediol alkanoate, tert-alkyl
alkane peroxoate and tert-alkyl alkylalkaneperoxoate initiated.
(G) Carbon nanotubes.
(G) Alkyl and aralkyl and trimethoxysilylethylene modified polysiloxane.
(G) Aromatic anhydride polymer with bisalkylbiphenylbisamine compound with alkylaminoalkyl acrylate ester.
(G) Polyol adduct of bisaldehyde.
(G) Heteropolycyclic, halo substituted alkyl substituted- diaromatic
amino substituted carbomonocycle, halo substituted alkyl substituted
heteropolycyclic, tetraaromatic metalloid salt (1:1).
(G) Dioic acids, polymers with caprolactam and alkyldiamines.
(G) Poly[2-(dimethylamino)ethyl acrylate chloride salt, vinyl acetate,
methacrylic acid and alkyl acrylates].
(S) 1H-Imidazole-1-propanenitrile,2-ethyl-ar-methyl(S) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with oxirane,
4-(dimethylamino)benzoate.
(G) Aminohydroxy naphthalenesulfonic acid, coupled with diazotized
[(aminophenyl)sulfonyl]ethyl hydrogen sulfate and diazotized amino[[
(sulfooxy)ethyl]sulfonyl]benzenesulfonic acid, salts.
(G) Alkaneic acid, dialkyl ester polymer with alkanediol,
(isocyanatocarbomonocycle) alkyl) carbomonocycle) carbamate.
P–12–0315 .....
02/07/2020
01/22/2020
N ......................................................
P–15–0054A ...
P–15–0361 .....
P–18–0108 .....
02/13/2020
02/24/2020
02/11/2020
09/30/2015
02/20/2020
01/27/2020
CBI Substantiation provided ...........
N ......................................................
N ......................................................
P–18–0133 .....
P–18–0160 .....
02/13/2020
02/21/2020
02/04/2020
02/12/2020
N ......................................................
N ......................................................
P–18–0258 .....
P–18–0277A ...
02/06/2020
02/21/2020
01/24/2020
05/15/2019
N ......................................................
CBI Substantiation provided ...........
P–18–0358 .....
P–19–0055 .....
02/14/2020
02/14/2020
01/20/2020
02/12/2020
N ......................................................
N ......................................................
P–19–0130A ...
02/04/2020
10/23/2019
CBI Substantiation provided ...........
P–19–0152 .....
02/03/2020
01/18/2020
N ......................................................
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
jbell on DSKJLSW7X2PROD with NOTICES
TABLE III—TEST INFORMATION RECEIVED FROM 02/01/2020 TO 02/29/2020
Case No.
P–16–0543 ..
VerDate Sep<11>2014
Received date
01/29/2020
17:26 Mar 20, 2020
Type of Test Information
Chemical Substance
Exposure Monitoring Report ............
Jkt 250001
PO 00000
Frm 00027
(G) Halogenophosphoric acid metal salt.
Fmt 4703
Sfmt 4703
E:\FR\FM\23MRN1.SGM
23MRN1
16340
Federal Register / Vol. 85, No. 56 / Monday, March 23, 2020 / Notices
TABLE III—TEST INFORMATION RECEIVED FROM 02/01/2020 TO 02/29/2020—Continued
Case No.
Received date
LM–18–0050
02/19/2020
P–18–0159 ..
02/04/2020
P–18–0202 ..
01/29/2020
Type of Test Information
Chemical Substance
Fish Acute Toxicity Test (OCED
Test Guideline 203), Ready
Biodegradability
(OECD
Test
Guideline 301F), Hydrolysis as a
function of pH (OECD Test Guideline 111), S, E, R, F Value Table.
Acute Oral Toxicity in the Rat
(OECD Test Guideline 420).
Water Solubility: Column Elution
Method; Shake Flask Method
(OCSPP
Test
Guideline
830.7840).
(G) Heterocyclic amine, 1-[2-[[4-[2-[2-amino-6-[2-[2,5-dialkoxy-4-[[2(sulfooxy)alkyl]sulfonyl]aromaticyl]]diazenyl]-5-hydroxy-7-sulfo-1aromaticyl]]diazenyl]-3-sulfoaromaticyl]]sulfonyl]alkyl]-3-carboxy-, inner
salt, alkali metal.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 12, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2020–06063 Filed 3–20–20; 8:45 am]
BILLING CODE 6560–50–P
EQUAL EMPLOYMENT OPPORTUNITY
COMMISSION
Agency Information Collection
Activities: Existing Collection
Equal Employment
Opportunity Commission.
ACTION: Notice of information
collection—request for new control
number and approval of collection:
Employer Information Report (EEO–1)
Component 1; revision of existing
approval for EEO–1 Component 2.
AGENCY:
In accordance with the
Paperwork Reduction Act (PRA), the
Equal Employment Opportunity
Commission (EEOC or Commission)
announces that it has submitted to the
Office of Management and Budget
(OMB) a request for a three-year PRA
approval of Component 1 of the
Employer Information Report (EEO–1).
The EEOC is seeking OMB approval to
remove Component 1 from OMB control
number 3046–0007 and assign it a new
PRA control number. The EEOC is not
submitting a request to approve
Component 2 of the EEO–1 collection.
DATES: Written comments on this notice
must be submitted on or before April 22,
2020.
jbell on DSKJLSW7X2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:26 Mar 20, 2020
Jkt 250001
(G) Thiophenium, 1-(2,7-disubstituted-1-naphthalenyl)tetrahydro-, salt
with polyfluoro-n-polyfluoroalkylsulfonyl-1-alkanesulfonamide(1:1).
(G) Trialkyl alkanal, polymer with phenol.
Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function. Commenters are also
encouraged to send comments to the
EEOC using any of the following
methods—please use only one method:
Federal eRulemaking Portal: https://
www.regulations.gov. Follow the
instructions on the website for
submitting comments.
Mail: Comments may be submitted by
mail to Bernadette B. Wilson, Executive
Officer, Executive Secretariat, Equal
Employment Opportunity Commission,
131 M Street NE, Washington, DC
20507.
Fax: Comments totaling six or fewer
pages can be sent by facsimile (‘‘fax’’)
machine to (202) 663–4114. (This is not
a toll-free number.) Receipt of fax
transmittals will not be acknowledged,
except that the sender may request
confirmation of receipt by calling the
Executive Secretariat staff at (202) 663–
4070 (voice) or (800) 669–6820 (TTY).
(These are not toll-free telephone
numbers.)
Instructions: All comments received
must include the agency name and
docket number. All comments received
will be posted without change to https://
www.regulations.gov, including any
personal information provided.
However, the EEOC reserves the right to
refrain from posting libelous or
otherwise inappropriate comments,
including those that contain obscene,
indecent, or profane language; that
contain threats or defamatory
statements; that contain hate speech
directed at race, color, sex, national
origin, age, religion, disability, or
genetic information; or that promote or
endorse services or products.
ADDRESSES:
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
All comments received, including any
personal information provided, also will
be available for public inspection during
normal business hours by appointment
only at the EEOC Headquarters’ Library,
131 M Street NE, Washington, DC
20507. Upon request, individuals who
require assistance viewing comments
are provided appropriate aids such as
readers or print magnifiers. To schedule
an appointment to inspect the
comments at the EEOC’s library, contact
the library staff at (202) 663–4630
(voice) or (800) 669–6820 (TTY). (These
are not toll-free numbers.)
FOR FURTHER INFORMATION CONTACT:
Rashida Dorsey, Ph.D., MPH, Director,
Data Development and Information
Products Division and Senior Advisor
on Data Strategy, Office of Enterprise
Data and Analytics, Equal Employment
Opportunity Commission, 131 M Street
NE, Washington, DC 20507, (202) 663–
4355 (voice) or (202) 663–7063 (TTY).
Requests for this notice in an alternative
format should be made to the Office of
Communications and Legislative Affairs
at (202) 663–4191 (voice) or (202) 663–
4494 (TTY).
SUPPLEMENTARY INFORMATION:
I. Background
A. The EEO–1 Report
Since 1966, the EEOC has required
EEO–1 filers to submit demographic
data (Component 1) on an annual basis.
All private employers that are covered
by Title VII of the Civil Rights Act of
1964, as amended (Title VII) 1 and that
have 100 or more employees are
required to file Component 1 data. In
addition, Office of Federal Contract
Compliance Programs (OFCCP)
regulations require certain federal
contractors to file the EEO–1 if they
have 50 or more employees and are not
1 42
U.S.C. 2000e, et seq.
E:\FR\FM\23MRN1.SGM
23MRN1
]]>Agencies
[Federal Register Volume 85, Number 56 (Monday, March 23, 2020)]
[Notices]
[Pages 16335-16340]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-06063]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10006-61]
Certain New Chemicals; Receipt and Status Information for
February 2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 02/01/
2020 to 02/29/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before April 22, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI)
[[Page 16336]]
or other information whose disclosure is restricted by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 02/01/2020 to 02/29/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of
[[Page 16337]]
EPA's determination for PMN/SNUN/MCAN notices on its website at:
https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 02/01/2020 to 02/29/2020
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0424A............... 4 02/18/2020 Sachem Inc........ (G) Directing (G)
agent. Tetraalkylpiperid
inium hydroxide.
P-16-0425A............... 5 02/05/2020 CBI............... (G) A chemical (G) amino-silane.
reactant used in
manufacturing a
polymer.
P-17-0178A............... 5 02/26/2020 Shin-Etsu Microsi. (G) (G) Sulfonium,
Microlithography triphenyl-, salt
for electronic with substituted-
device alkyl 4-
manufacturing. substituted-
benzoate.
P-17-0355A............... 7 02/05/2020 CBI............... (G) Site (G) Benzoic acid,
intermediate. 2-hydroxy-, -
alkyl derivs.
P-18-0013A............... 3 02/26/2020 Shin-Etsu Microsi. (G) (G) Substituted-
Microlithography triphenylsulfoniu
for electronic m, inner salt.
device
manufacturing.
P-18-0014A............... 3 02/26/2020 Shin-Etsu Microsi. (G) (G) Sulfonium,
Microlithography triphenyl-, salt
for electronic with
device disubstituted-
manufacturing. heterocyclic
compound (1:1).
P-18-0037A............... 2 02/26/2020 Shin-Etsu Microsi. (G) (G) Sulfonium,
Microlithography triphenyl-, salt
for electronic with 2,4,5-
device trisubstituted-
manufacturing. benzenesulfonate
(1:1).
P-18-0151A............... 9 02/04/2020 Struers Inc....... (S) A curing agent (S) Formaldehyde,
for curing epoxy reaction products
systems. with 1,3-
benzenedimethanam
ine and p-tert-
butylphenol.
P-18-0154A............... 8 02/19/2020 CBI............... (G) Crosslinking (G) Isocyanic
agent for acid,
coatings. polyalkylenepolyc
ycloalkylene
ester, 2-alkoxy
alkanol and 1-
alkoxy alkanol
and alkylene diol
blocked.
P-18-0211A............... 2 02/17/2020 Patcham USA LLC... (S) Wetting and (G) Alkaneamine,
dispersing agent (aminoalkyl)-,
for pigment polymer with
formulations, aziridine and 1,6-
paints, and diisocyanatohexan
coatings. e, polyethylene
glycol alkyl
ether- and
polyethylene-
polypropylene
glycol aminoalkyl
alkyl ether- and
alkenyl
benzenated
polyethylene
glycol Ph ether.
P-18-0273A............... 5 02/05/2020 CBI............... (G) Used in (S) 1,4-
polymer Cyclohexanedicarb
manufacturing. oxylic acid, 1,4-
bis(2-ethylhexyl)
ester.
P-18-0283A............... 6 02/21/2020 CBI............... (G) Open, non- (G) Hydroxy
dispersive use. alkanoic acid,
compds. with
aminoalkoxyalcoho
l-epoxy polymer-
alkanolamine
reaction
products.
P-18-0289A............... 4 02/13/2020 CBI............... (G) Gas scrubbing, (G) 2-
(G) landfill (2(methylcaboxymo
deoderizing, (G) nocyclic)amino)et
wastewater hoxy)-alcohol.
deoderizing.
P-18-0290A............... 4 02/13/2020 CBI............... (G) wastewater (G) Carbomonocylic-
deodorizing, (G) oxazolidine.
Gas scrubbing,
(G) Landfill odor
neutralizing.
P-18-0302A............... 5 02/15/2020 CBI............... (G) Chemical (S) D-glucaric
intermediate. acid, ammonium
salt (1:1).
P-18-0323A............... 5 02/25/2020 Kuraray America, (G) Raw material (S) 2-Propenoic
Inc. for polymer acid, 2-methyl-,
manufacturing. 3-methyl-3-buten-
1-yl ester.
P-18-0323A............... 6 02/28/2020 Kuraray America, (G) Raw material (S) 2-Propenoic
Inc. for polymer acid, 2-methyl-,
manufacturing. 3-methyl-3-buten-
1-yl ester.
P-18-0326A............... 6 02/24/2020 CBI............... (G) Chemical (G) Alkanoic acid,
Intermediate. alkyl ester,
manuf. of,
byproducts from,
distn. residues.
P-18-0379A............... 2 02/11/2020 CBI............... (G) Hardener for (G) Cashew
waterborne epoxy nutshell liquid
system. polymer with
Epichlorohydrin,
formaldehyde,
phenol, amines
and glycol.,
P-18-0387A............... 2 02/06/2020 CBI............... (G) Plastic (G) Alkanal,
Additive. reaction products
with alkanediyl
bis[alkyl-
tris(alkyl-
heterocycle)-
1,3,5-triazine-
2,4,6-triamine
and hydrogen
peroxide.
P-18-0388A............... 2 02/06/2020 CBI............... (G) Plastic (G) 1,3,5-triazine-
additive. 2,4,6-triamine,
alkanediyl
bis[alkyl-
tris(alkyl-
heterocycle)-,
allyl derivs.,
oxidized,
hydrogenated.
P-19-0053A............... 7 02/28/2020 Wacker Chemical (S) Used as a (S) 1-Butanamine,
Corporation. surface N-butyl-N-
treatment, [(triethoxysilyl)
sealant, caulk, methyl]-
and coating for
mineral building
materials such as
concrete, brick,
limestone, and
plaster, as well
as on wood, metal
and other
substrates.
[[Page 16338]]
P-19-0064A............... 6 02/21/2020 The Sherwin (G) Polymeric film (G) 4,4'-
Williams Company. former for methylenebis[2,6-
coatings. dimethyl phenol]
polymer with 2-
(chloromethyl)oxi
rane, 1,4-benzyl
diol, 2-methyl-2-
propenoic acid,
butyl 2-methyl 2-
propenoate, ethyl
2-methyl 2-
propenoate, and
ethyl 2-
propenoate,
reaction products
with 2-
(dimethylamino)
ethanol.
P-19-0077A............... 10 02/19/2020 CBI............... (G) Agricultural.. (G) Alkenylamide.
P-19-0085A............... 3 02/18/2020 Neste oil US, Inc. (G) The PMN (G) Aliphatic
substance will be hydrocarbons, C16-
used as a 18-branched and
functional fluid linear.
in electrical
equipment.
P-19-0088A............... 4 02/26/2020 CBI............... (G) Feedstock for (S) Ethanamine, N-
amine recovery. ethyl-, 2-hydroxy-
1,2,3-
propanetricarboxy
late (1:?).
P-19-0109A............... 8 02/20/2020 Arch Chemicals, (G) A component of (S) Copper,
Inc. a cleaning [[2,2',2''-
formulation to (nitrilo-
improve the .kappa.N)tris[eth
wettability of anolato-
the overall .kappa.O]](2-)]-
cleaning solution (S) Copper, bis[2-
on the substrate. (amino-
.kappa.N)ethanola
to-.kappa.O]-;
P-19-0170A............... 2 02/06/2020 CBI............... (S) Coupling agent (G) Heteroatom-
in elastomer- substituted alkyl
based triethoxysilane,
formulations that reaction products
will be used in with methylated
molding formaldehyde-
operations to melamine polymer.
manufacture
different types
of rubber
articles
including but not
limited to rubber
tires.
P-20-0008A............... 2 02/13/2020 Archroma U.S., Inc (S) Dye for use (G) 7-
with paper, paper Heteropolycyclics
products, and ulfonic acid, 2-
nonwoven products [4-[2-[1-[[(2-
produced from methoxy-5-methyl-
paper. 4-
sulfophenyl)amino
]carbonyl]-2-
oxopropyl]diazeny
l]phenyl]-6-
methyl-, compd.
with
(alkylamino)alkan
ol and
(hydroxyalkyl)ami
ne.
P-20-0010A............... 4 02/21/2020 CBI............... (G) Polymerization (G) Carboxylic
auxiliary. acid, reaction
products with
metal hydroxide,
inorganic dioxide
and metal.
P-20-0012A............... 6 02/07/2020 CBI............... (G) Ink Additive.. (G) Polyol,
polymer with
alkyl
diisocyanate,
alkyl substituted
heterocycle
blocked.
P-20-0013A............... 2 02/17/2020 Arkema Inc........ (G) UV curable (S) 2-Propenoic
inks. acid, 2-methyl-,
(2-oxo-1,3-
dioxolan-4-
yl)methyl ester.
P-20-0015A............... 5 02/05/2020 GE Healthcare..... (S) Used in the (G) N-alkyl
manufacture of heteromonocyclic
hollow fiber diphenolamide,
products. polymer with
Bisphenol A,
haloaryl-
substituted
sulfone, compd.
with cyclic
sulfonate ester,
polyaryl alcohol
terminated.
P-20-0024A............... 4 02/21/2020 CBI............... (G) Dispersant (G) Phenol-
polymer for formaldehyde
coatings. polymer with
amino-oxirane
copolymer and
nitrobenzoates.
P-20-0026A............... 4 02/04/2020 GE Healthcare..... (S) The new (G) N-alkyl
monomer is heteromonocyclic
isolated and used diphenolamide.
for subsequent
polymerization.
P-20-0026A............... 5 02/05/2020 GE Healthcare..... (S) The new (G) N-alkyl
monomer is heteromonocyclic
isolated and used diphenolamide.
for subsequent
polymerization.
P-20-0026A............... 6 02/06/2020 GE Healthcare..... (S) The new (G) N-alkyl
monomer is heteromonocyclic
isolated and used diphenolamide.
for subsequent
polymerization.
P-20-0036................ 2 02/06/2020 Sigma-Aldrich Co (G) Used in the (S) Carbonic acid,
LLC. manufacture of di(lithium-6Li)
Lithium-6 salt.
Chloride.
P-20-0037................ 3 02/12/2020 Sigma-Aldrich Co (G) Used in (S) Lithium
LLC. manufacturing Chloride (6LiCl).
devices for gamma
and neutron
radiation
detection.
P-20-0043................ 4 02/23/2020 Saproterra........ (S) Soil and Plant (S) Acetic acid, 2-
amendment. [[3-(4-pyridinyl)-
1H-1,2,4-triazol-
5-yl]thio]-,
compd. with 2-
aminoethanol
(1:1).
P-20-0044A............... 2 02/21/2020 Angus Chemical (G) Curing (S) 1-Propanamine,
Company. additive: 3-methoxy-N,N-
Automotive paint, dimethyl.
(G)
Neutralization,
stability and
pigment
dispersancy in
industrial latex
paints, (G)
Neutralization,
solubilization
and stability in
commercial
waterborne and
solvent borne
coatings and
varnishes used
for wood, metal,
composites and
other substrates,
(G) Solubilizer
for high acid
value styrene
acrylic polymers
for use in ink
applications, (G)
Additive for
industrial
polyurethane
dispersions.
P-20-0045................ 2 02/27/2020 Torrecid USA LLC.. (G) Raw material (S) Iron oxide
in ceramic tiles (Fe2O3), mixed
production. with silica,
calcined.
P-20-0050................ 2 02/05/2020 CBI............... (G) Additive in (S)
consumer products. Benzenepentanol,
alpha, gamma-
dimethyl-
P-20-0050A............... 3 02/20/2020 CBI............... (G) Additive in (S)
consumer products. Benzenepentanol,
alpha, gamma-
dimethyl-
P-20-0051A............... 2 02/07/2020 CBI............... (S) Curing agent (S) 1,8-
for Industrial Octanediamine, 4-
epoxy coating (aminomethyl)-, N-
systems. benzyl derivs.
P-20-0052................ 1 02/05/2020 Evonik Corporation (S) Liquid (S) Oxirane, 2-
shrinkage methyl-, polymer
reducing with oxirane,
admixture for mono(3,5,5-
concrete. trimethylhexanoat
e).
P-20-0054................ 1 02/07/2020 CBI............... (G) Catalyst is (S) Nitrile
used in a closed hydratase.
process.
[[Page 16339]]
P-20-0056................ 2 02/12/2020 CBI............... (G) Pigment (G) Polyphosphoric
dispersant. acids, 2-[(alkyl-
1-oxo-alkene-1-
yl)oxy]alkyl
esters, polymers
with acrylic
acid, alkyl
acrylate, alkyl
methacrylate,
hydroxyalkyl
methacrylate and
carbomonocycle,
2,2'-(1,2-
diazenediyl)bis[2
,4-
dialkylalkanenitr
ogensubstituted]-
initiated.
P-20-0057................ 1 02/11/2020 Nusil Technology (G) Silane (G) Arene,
LLC. coupling agent trimethoxysilyl-,
used in silicone hydrolyzed.
formulations.
P-20-0058................ 2 02/19/2020 CBI............... (G) Additive for (G)
automatic Polysaccharide,
dishwashing, (G) polymer with
Additive for hard unsaturated
surface cleaner. carboxylic acid
and
methacryloxyethyl
trimethyl
ammonium
chloride, sodium
salt, acid salt
initiated.
P-20-0059................ 3 02/28/2020 CBI............... (S) Colorant for (G)
thermoplastic Propanedinitrile,
resins. 2-[[4-[ethyl[2-[4-
(substitute
methyl
butyl)phenoxy]eth
yl]amino]-2-
methylphenyl]meth
ylene].
SN-20-0001............... 1 02/05/2020 CBI............... (G) Carrier (S) 2-Butene,
fluids, (G) 1,1,1,4,4,4-
Precision and hexafluoro-, (2Z)-
general cleaning,
(G) Aerosol
solvent.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90-day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved* From 02/01/2020 to 02/29/2020
----------------------------------------------------------------------------------------------------------------
If amendment, type of
Case No. Received date Commencement date amendment Chemical Substance
----------------------------------------------------------------------------------------------------------------
P-12-0315............... 02/07/2020 01/22/2020 N..................... (G) 2-alkenoic acid, 2-
alkyl-, polymer with alkyl
2-alkyl alkanoate, vinyl
carbomonocycle, alkyl
alkanoate and alkanediol
alkanoate, tert-alkyl
alkane peroxoate and tert-
alkyl alkylalkaneperoxoate
initiated.
P-15-0054A.............. 02/13/2020 09/30/2015 CBI Substantiation (G) Carbon nanotubes.
provided.
P-15-0361............... 02/24/2020 02/20/2020 N..................... (G) Alkyl and aralkyl and
trimethoxysilylethylene
modified polysiloxane.
P-18-0108............... 02/11/2020 01/27/2020 N..................... (G) Aromatic anhydride
polymer with
bisalkylbiphenylbisamine
compound with
alkylaminoalkyl acrylate
ester.
P-18-0133............... 02/13/2020 02/04/2020 N..................... (G) Polyol adduct of
bisaldehyde.
P-18-0160............... 02/21/2020 02/12/2020 N..................... (G) Heteropolycyclic, halo
substituted alkyl
substituted- diaromatic
amino substituted
carbomonocycle, halo
substituted alkyl
substituted
heteropolycyclic,
tetraaromatic metalloid
salt (1:1).
P-18-0258............... 02/06/2020 01/24/2020 N..................... (G) Dioic acids, polymers
with caprolactam and
alkyldiamines.
P-18-0277A.............. 02/21/2020 05/15/2019 CBI Substantiation (G) Poly[2-
provided. (dimethylamino)ethyl
acrylate chloride salt,
vinyl acetate, methacrylic
acid and alkyl acrylates].
P-18-0358............... 02/14/2020 01/20/2020 N..................... (S) 1H-Imidazole-1-
propanenitrile,2-ethyl-ar-
methyl-
P-19-0055............... 02/14/2020 02/12/2020 N..................... (S) 1,3-propanediol, 2-
ethyl-2-(hydroxymethyl)-,
polymer with oxirane, 4-
(dimethylamino)benzoate.
P-19-0130A.............. 02/04/2020 10/23/2019 CBI Substantiation (G) Aminohydroxy
provided. naphthalenesulfonic acid,
coupled with
diazotized[(aminophenyl)su
lfonyl]ethyl hydrogen
sulfate and diazotized
amino[[(sulfooxy)ethyl]sul
fonyl]benzenesulfonic
acid, salts.
P-19-0152............... 02/03/2020 01/18/2020 N..................... (G) Alkaneic acid, dialkyl
ester polymer with
alkanediol,
(isocyanatocarbomonocycle)
alkyl) carbomonocycle)
carbamate.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 02/01/2020 to 02/29/2020
------------------------------------------------------------------------
Type of Test
Case No. Received date Information Chemical Substance
------------------------------------------------------------------------
P-16-0543........ 01/29/2020 Exposure (G)
Monitoring Halogenophosphoric
Report. acid metal salt.
[[Page 16340]]
LM-18-0050....... 02/19/2020 Fish Acute (G) Heterocyclic
Toxicity Test amine, 1-[2-[[4-[2-
(OCED Test [2-amino-6-[2-[2,5-
Guideline dialkoxy-4-[[2-
203), Ready (sulfooxy)alkyl]sul
Biodegradabili fonyl]aromaticyl]]d
ty (OECD Test iazenyl]-5-hydroxy-
Guideline 7-sulfo-1-
301F), aromaticyl]]diazeny
Hydrolysis as l]-3-
a function of sulfoaromaticyl]]su
pH (OECD Test lfonyl]alkyl]-3-
Guideline carboxy-, inner
111), S, E, R, salt, alkali metal.
F Value Table.
P-18-0159........ 02/04/2020 Acute Oral (G) Thiophenium, 1-
Toxicity in (2,7-disubstituted-
the Rat (OECD 1-
Test Guideline naphthalenyl)tetrah
420). ydro-, salt with
polyfluoro-n-
polyfluoroalkylsulf
onyl-1-
alkanesulfonamide(1
:1).
P-18-0202........ 01/29/2020 Water (G) Trialkyl
Solubility: alkanal, polymer
Column Elution with phenol.
Method; Shake
Flask Method
(OCSPP Test
Guideline
830.7840).
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 12, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-06063 Filed 3-20-20; 8:45 am]
BILLING CODE 6560-50-P
