Airworthiness Directives; Airbus SAS Airplanes, 15938-15940 [2020-05764]

Download as PDF 15938 Federal Register / Vol. 85, No. 55 / Friday, March 20, 2020 / Rules and Regulations (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) Ageˆncia Nacional de Aviac ¸a˜o Civil ANAC Brazilian AD 2019–10–02, effective October 21, 2019. (ii) [Reserved] (3) For information about ANAC Brazilian AD 2019–10–02, contact National Civil Aviation Agency, Aeronautical Products Certification Branch (GGCP), Rua Laurent Martins, nß209, Jardim Esplanada, CEP 12242–431—Sa˜o Jose´ dos Campos—SP, Brazil; telephone 55 (12) 3203–6600; email pac@anac.gov.br; internet www.anac.gov.br/ en/. (4) You may view this material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2019–0975. (5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@ nara.gov, or go to: https://www.archives.gov/ federal-register/cfr/ibr-locations.html. Issued on March 6, 2020. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–05708 Filed 3–19–20; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2019–0982; Product Identifier 2019–NM–170–AD; Amendment 39–19866; AD 2020–05–16] RIN 2120–AA64 Airworthiness Directives; Airbus SAS Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. jbell on DSKJLSW7X2PROD with RULES AGENCY: SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319–115 airplanes; Model A320–214, –216, –232, –251N, and –271N airplanes; and Model A321– 211, –231, –251N, –251NX, –253N, –271N, –271NX, and –272N airplanes. This AD was prompted by reports of incomplete installations of the over wing panel lug attachments in the production assembly line. This AD requires a one-time detailed inspection of certain attaching points on the lefthand and right-hand wings for the VerDate Sep<11>2014 17:04 Mar 19, 2020 Jkt 250001 correct installation of certain hardware, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective April 24, 2020. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 24, 2020. ADDRESSES: For the material incorporated by reference (IBR) in this AD, contact the EASA, KonradAdenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 89990 1000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2019– 0982. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2019– 0982; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Sanjay Ralhan, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3223; email Sanjay.Ralhan@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2019–0233, dated September 18, 2019; corrected September 19, 2019 (‘‘EASA AD 2019–0233’’) (also referred to as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct PO 00000 Frm 00030 Fmt 4700 Sfmt 4700 an unsafe condition for certain Airbus SAS Model A319–115 airplanes; Model A320–214, –216, –232, –251N, and –271N airplanes; and Model A321–211, –231, –251N, –251NX, –253N, –271N, –271NX, and –272N airplanes. The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A319–115 airplanes; Model A320–214, –216, –232, –251N, and –271N airplanes; and Model A321–211, –231, –251N, –251NX, –253N, –271N, –271NX, and –272N airplanes. The NPRM published in the Federal Register on December 16, 2019 (84 FR 68365). The NPRM was prompted by reports of incomplete installations of the over wing panel lug attachments in the production assembly line. The NPRM proposed to require a one-time detailed inspection of certain attaching points on the left-hand and right-hand wings for the correct installation of certain hardware, and, depending on findings, accomplishment of applicable corrective actions, as specified in an EASA AD. The FAA is issuing this AD to address this condition, which, if not detected and corrected, could reduce the structural integrity of the wing. See the MCAI for additional background information. Comments The FAA gave the public the opportunity to participate in developing this final rule. The FAA has considered the comment received. The Air Line Pilots Association, International (ALPA) indicated its support for the NPRM. Conclusion The FAA reviewed the relevant data, considered the comment received, and determined that air safety and the public interest require adopting this final rule as proposed, except for minor editorial changes. The FAA has determined that these minor changes: • Are consistent with the intent that was proposed in the NPRM for addressing the unsafe condition; and • Do not add any additional burden upon the public than was already proposed in the NPRM. Related IBR Material Under 1 CFR Part 51 EASA AD 2019–0233 describes procedures for a one-time detailed inspection of certain attaching points on the left-hand and right-hand wings for the correct installation of certain hardware (bolt, nut, washer, and cotter pin), and, depending on findings, accomplishment of applicable corrective actions. Corrective actions include E:\FR\FM\20MRR1.SGM 20MRR1 15939 Federal Register / Vol. 85, No. 55 / Friday, March 20, 2020 / Rules and Regulations installing missing hardware, doing a detailed inspection of the attaching point and attaching straps for distortion or missing parts, and repair. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. Costs of Compliance The FAA estimates that this AD affects 110 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD: ESTIMATED COSTS FOR REQUIRED ACTIONS * Labor cost Parts cost Cost per product Cost on U.S. operators 2 work-hours × $85 per hour = $170 .......................................................................................... $0 $170 $18,700 * Table does not include estimated costs for reporting. The FAA estimates that it would take about 1 work-hour per product to comply with the reporting requirement in this AD. The average labor rate is $85 per hour. Based on these figures, the FAA estimates the cost of reporting the inspection results on U.S. operators to be $9,350, or $85 per product. The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need these on-condition actions: ESTIMATED COSTS OF ON-CONDITION ACTIONS Labor cost Parts cost Up to 20 work-hours × $85 per hour = $1,700 ....................................... Up to $77,850 ................................ Paperwork Reduction Act A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB control number. The control number for the collection of information required by this AD is 2120–0056. The paperwork cost associated with this AD has been detailed in the Costs of Compliance section of this document and includes time for reviewing instructions, as well as completing and reviewing the collection of information. Therefore, all reporting associated with this AD is mandatory. Comments concerning the accuracy of this burden and suggestions for reducing the burden should be directed to Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Parkway, Fort Worth, TX 76177–1524. jbell on DSKJLSW7X2PROD with RULES Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section VerDate Sep<11>2014 17:04 Mar 19, 2020 Jkt 250001 44701: ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Cost per product Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. PO 00000 Frm 00031 Fmt 4700 Sfmt 4700 Up to $79,550. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ 2020–05–16 Airbus SAS: Amendment 39– 19866; Docket No. FAA–2019–0982; Product Identifier 2019–NM–170–AD. (a) Effective Date This AD is effective April 24, 2020. (b) Affected ADs None. (c) Applicability This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1) through (3) of this AD, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2019– 0233, dated September 18, 2019; corrected September 19, 2019 (‘‘EASA AD 2019– 0233’’). (1) Model A319–115 airplanes. (2) Model A320–214, –216, –232, –251N, and –271N airplanes. (3) Model A321–211, –231, –251N, –251NX, –253N, –271N, –271NX, and –272N airplanes. E:\FR\FM\20MRR1.SGM 20MRR1 15940 Federal Register / Vol. 85, No. 55 / Friday, March 20, 2020 / Rules and Regulations (d) Subject Air Transport Association (ATA) of America Code 57, Wings. (e) Reason This AD was prompted by reports of incomplete installations of the over wing panel lug attachments in the production assembly line. The FAA is issuing this AD to address this condition, which, if not detected and corrected, could reduce the structural integrity of the wing. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2019–0233. jbell on DSKJLSW7X2PROD with RULES (h) Exceptions to EASA AD 2019–0233 (1) Where EASA AD 2019–0233 refers to its effective date, this AD requires using the effective date of this AD. (2) The ‘‘Remarks’’ section of EASA AD 2019–0233 does not apply to this AD. (3) Where any service information referenced in EASA AD 2019–0233 specifies reporting, this AD requires reporting all inspection results at the applicable time specified in paragraph (h)(3)(i) or (ii) of this AD. If operators have reported findings as part of obtaining any corrective actions approved by Airbus SAS’s EASA Design Organization Approval (DOA), operators are not required to report those findings as specified in this paragraph. (i) If the inspection was done on or after the effective date of this AD: Submit the report within 30 days after the inspection. (ii) If the inspection was done before the effective date of this AD: Submit the report within 30 days after the effective date of this AD. (i) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Section, Transport Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Section, send it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@ faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Section, Transport Standards Branch, FAA; or EASA; VerDate Sep<11>2014 17:04 Mar 19, 2020 Jkt 250001 or Airbus SAS’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOAauthorized signature. (3) Required for Compliance (RC): For any service information referenced in EASA AD 2019–0233 that contains RC procedures and tests: Except as required by paragraph (i)(2) of this AD, RC procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC. (4) Paperwork Reduction Act Burden Statement: A federal agency may not conduct or sponsor, and a person is not required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act unless that collection of information displays a current valid OMB Control Number. The OMB Control Number for this information collection is 2120–0056. Public reporting for this collection of information is estimated to be approximately 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. All responses to this collection of information are mandatory as required by this AD; the nature and extent of confidentiality to be provided, if any. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Information Collection Clearance Officer, Federal Aviation Administration, 10101 Hillwood Parkway, Fort Worth, TX 76177–1524. easa.europa.eu; Internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https:// ad.easa.europa.eu. (4) You may view this material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2019–0982. (5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@ nara.gov, or go to: https://www.archives.gov/ federal-register/cfr/ibr-locations.html. (j) Related Information For more information about this AD, contact Sanjay Ralhan, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206– 231–3223; email Sanjay.Ralhan@faa.gov. SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Yabora˜ Indu´stria Aerona´utica S.A. (Type Certificate Previously Held by Embraer S.A.) Model ERJ 190–100 STD, –100 LR, –100 ECJ, –100 IGW, –200 STD, –200 LR, and –200 IGW airplanes. This AD was prompted by a report of erroneous indications of certain engine parameters and reports of ‘‘pitch up’’ and ‘‘pitch down’’ uncommanded attitudes with autopilot engaged in cruise flight. This AD requires installing updated PRIMUS EPIC LOAD software, as specified in an Ageˆncia Nacional de Aviac ¸a˜o Civil (ANAC) Brazilian AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective April 24, 2020. The Director of the Federal Register approved the incorporation by reference (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) European Union Aviation Safety Agency (EASA) AD 2019–0233, dated September 18, 2019; corrected September 19, 2019. (ii) [Reserved] (3) For information about EASA AD 2019– 0233, contact the EASA, Konrad-AdenauerUfer 3, 50668 Cologne, Germany; telephone +49 221 89990 6017; email ADs@ PO 00000 Frm 00032 Fmt 4700 Sfmt 4700 Issued on March 4, 2020. Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–05764 Filed 3–19–20; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2019–0976; Product Identifier 2019–NM–177–AD; Amendment 39–19871; AD 2020–05–21] RIN 2120–AA64 Airworthiness Directives; Yabora˜ Indu´stria Aerona´utica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. AGENCY: E:\FR\FM\20MRR1.SGM 20MRR1

Agencies

[Federal Register Volume 85, Number 55 (Friday, March 20, 2020)]
[Rules and Regulations]
[Pages 15938-15940]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-05764]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2019-0982; Product Identifier 2019-NM-170-AD; Amendment 
39-19866; AD 2020-05-16]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for 
certain Airbus SAS Model A319-115 airplanes; Model A320-214, -216, -
232, -251N, and -271N airplanes; and Model A321-211, -231, -251N, -
251NX, -253N, -271N, -271NX, and -272N airplanes. This AD was prompted 
by reports of incomplete installations of the over wing panel lug 
attachments in the production assembly line. This AD requires a one-
time detailed inspection of certain attaching points on the left-hand 
and right-hand wings for the correct installation of certain hardware, 
and, depending on findings, accomplishment of applicable corrective 
actions, as specified in a European Union Aviation Safety Agency (EASA) 
AD, which is incorporated by reference. The FAA is issuing this AD to 
address the unsafe condition on these products.

DATES: This AD is effective April 24, 2020. The Director of the Federal 
Register approved the incorporation by reference of a certain 
publication listed in this AD as of April 24, 2020.

ADDRESSES: For the material incorporated by reference (IBR) in this AD, 
contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; 
telephone +49 221 89990 1000; email [email protected]; internet 
www.easa.europa.eu. You may find this IBR material on the EASA website 
at https://ad.easa.europa.eu. You may view this IBR material at the 
FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. 
For information on the availability of this material at the FAA, call 
206-231-3195. It is also available in the AD docket on the internet at 
https://www.regulations.gov by searching for and locating Docket No. 
FAA-2019-0982.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2019-
0982; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this final rule, the regulatory evaluation, any comments received, and 
other information. The address for Docket Operations is U.S. Department 
of Transportation, Docket Operations, M-30, West Building Ground Floor, 
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Sanjay Ralhan, Aerospace Engineer, 
International Section, Transport Standards Branch, FAA, 2200 South 
216th St., Des Moines, WA 98198; telephone and fax 206-231-3223; email 
[email protected].

SUPPLEMENTARY INFORMATION: 

Discussion

    The EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2019-0233, dated September 18, 2019; 
corrected September 19, 2019 (``EASA AD 2019-0233'') (also referred to 
as the Mandatory Continuing Airworthiness Information, or ``the 
MCAI''), to correct an unsafe condition for certain Airbus SAS Model 
A319-115 airplanes; Model A320-214, -216, -232, -251N, and -271N 
airplanes; and Model A321-211, -231, -251N, -251NX, -253N, -271N, -
271NX, and -272N airplanes.
    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to certain Airbus SAS 
Model A319-115 airplanes; Model A320-214, -216, -232, -251N, and -271N 
airplanes; and Model A321-211, -231, -251N, -251NX, -253N, -271N, -
271NX, and -272N airplanes. The NPRM published in the Federal Register 
on December 16, 2019 (84 FR 68365). The NPRM was prompted by reports of 
incomplete installations of the over wing panel lug attachments in the 
production assembly line. The NPRM proposed to require a one-time 
detailed inspection of certain attaching points on the left-hand and 
right-hand wings for the correct installation of certain hardware, and, 
depending on findings, accomplishment of applicable corrective actions, 
as specified in an EASA AD.
    The FAA is issuing this AD to address this condition, which, if not 
detected and corrected, could reduce the structural integrity of the 
wing. See the MCAI for additional background information.

Comments

    The FAA gave the public the opportunity to participate in 
developing this final rule. The FAA has considered the comment 
received. The Air Line Pilots Association, International (ALPA) 
indicated its support for the NPRM.

Conclusion

    The FAA reviewed the relevant data, considered the comment 
received, and determined that air safety and the public interest 
require adopting this final rule as proposed, except for minor 
editorial changes. The FAA has determined that these minor changes:
     Are consistent with the intent that was proposed in the 
NPRM for addressing the unsafe condition; and
     Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related IBR Material Under 1 CFR Part 51

    EASA AD 2019-0233 describes procedures for a one-time detailed 
inspection of certain attaching points on the left-hand and right-hand 
wings for the correct installation of certain hardware (bolt, nut, 
washer, and cotter pin), and, depending on findings, accomplishment of 
applicable corrective actions. Corrective actions include

[[Page 15939]]

installing missing hardware, doing a detailed inspection of the 
attaching point and attaching straps for distortion or missing parts, 
and repair. This material is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

Costs of Compliance

    The FAA estimates that this AD affects 110 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:

                                     Estimated Costs for Required Actions *
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
2 work-hours x $85 per hour = $170...........................              $0             $170          $18,700
----------------------------------------------------------------------------------------------------------------
* Table does not include estimated costs for reporting.

    The FAA estimates that it would take about 1 work-hour per product 
to comply with the reporting requirement in this AD. The average labor 
rate is $85 per hour. Based on these figures, the FAA estimates the 
cost of reporting the inspection results on U.S. operators to be 
$9,350, or $85 per product.
    The FAA estimates the following costs to do any necessary on-
condition actions that would be required based on the results of any 
required actions. The FAA has no way of determining the number of 
aircraft that might need these on-condition actions:

                 Estimated Costs of On-Condition Actions
------------------------------------------------------------------------
           Labor cost                 Parts cost       Cost per product
------------------------------------------------------------------------
Up to 20 work-hours x $85 per     Up to $77,850.....  Up to $79,550.
 hour = $1,700.
------------------------------------------------------------------------

Paperwork Reduction Act

    A federal agency may not conduct or sponsor, and a person is not 
required to respond to, nor shall a person be subject to penalty for 
failure to comply with a collection of information subject to the 
requirements of the Paperwork Reduction Act unless that collection of 
information displays a current valid OMB control number. The control 
number for the collection of information required by this AD is 2120-
0056. The paperwork cost associated with this AD has been detailed in 
the Costs of Compliance section of this document and includes time for 
reviewing instructions, as well as completing and reviewing the 
collection of information. Therefore, all reporting associated with 
this AD is mandatory. Comments concerning the accuracy of this burden 
and suggestions for reducing the burden should be directed to 
Information Collection Clearance Officer, Federal Aviation 
Administration, 10101 Hillwood Parkway, Fort Worth, TX 76177-1524.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2020-05-16 Airbus SAS: Amendment 39-19866; Docket No. FAA-2019-0982; 
Product Identifier 2019-NM-170-AD.

(a) Effective Date

    This AD is effective April 24, 2020.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to the Airbus SAS airplanes specified in 
paragraphs (c)(1) through (3) of this AD, certificated in any 
category, as identified in European Union Aviation Safety Agency 
(EASA) AD 2019-0233, dated September 18, 2019; corrected September 
19, 2019 (``EASA AD 2019-0233'').
    (1) Model A319-115 airplanes.
    (2) Model A320-214, -216, -232, -251N, and -271N airplanes.
    (3) Model A321-211, -231, -251N, -251NX, -253N, -271N, -271NX, 
and -272N airplanes.

[[Page 15940]]

(d) Subject

    Air Transport Association (ATA) of America Code 57, Wings.

(e) Reason

    This AD was prompted by reports of incomplete installations of 
the over wing panel lug attachments in the production assembly line. 
The FAA is issuing this AD to address this condition, which, if not 
detected and corrected, could reduce the structural integrity of the 
wing.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, EASA AD 2019-0233.

(h) Exceptions to EASA AD 2019-0233

    (1) Where EASA AD 2019-0233 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) The ``Remarks'' section of EASA AD 2019-0233 does not apply 
to this AD.
    (3) Where any service information referenced in EASA AD 2019-
0233 specifies reporting, this AD requires reporting all inspection 
results at the applicable time specified in paragraph (h)(3)(i) or 
(ii) of this AD. If operators have reported findings as part of 
obtaining any corrective actions approved by Airbus SAS's EASA 
Design Organization Approval (DOA), operators are not required to 
report those findings as specified in this paragraph.
    (i) If the inspection was done on or after the effective date of 
this AD: Submit the report within 30 days after the inspection.
    (ii) If the inspection was done before the effective date of 
this AD: Submit the report within 30 days after the effective date 
of this AD.

(i) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Section, Transport Standards Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the International Section, send it to the attention of 
the person identified in paragraph (j) of this AD. Information may 
be emailed to: [email protected]. Before using any 
approved AMOC, notify your appropriate principal inspector, or 
lacking a principal inspector, the manager of the local flight 
standards district office/certificate holding district office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Section, Transport Standards Branch, FAA; or EASA; or Airbus SAS's 
EASA Design Organization Approval (DOA). If approved by the DOA, the 
approval must include the DOA-authorized signature.
    (3) Required for Compliance (RC): For any service information 
referenced in EASA AD 2019-0233 that contains RC procedures and 
tests: Except as required by paragraph (i)(2) of this AD, RC 
procedures and tests must be done to comply with this AD; any 
procedures or tests that are not identified as RC are recommended. 
Those procedures and tests that are not identified as RC may be 
deviated from using accepted methods in accordance with the 
operator's maintenance or inspection program without obtaining 
approval of an AMOC, provided the procedures and tests identified as 
RC can be done and the airplane can be put back in an airworthy 
condition. Any substitutions or changes to procedures or tests 
identified as RC require approval of an AMOC.
    (4) Paperwork Reduction Act Burden Statement: A federal agency 
may not conduct or sponsor, and a person is not required to respond 
to, nor shall a person be subject to a penalty for failure to comply 
with a collection of information subject to the requirements of the 
Paperwork Reduction Act unless that collection of information 
displays a current valid OMB Control Number. The OMB Control Number 
for this information collection is 2120-0056. Public reporting for 
this collection of information is estimated to be approximately 1 
hour per response, including the time for reviewing instructions, 
searching existing data sources, gathering and maintaining the data 
needed, and completing and reviewing the collection of information. 
All responses to this collection of information are mandatory as 
required by this AD; the nature and extent of confidentiality to be 
provided, if any. Send comments regarding this burden estimate or 
any other aspect of this collection of information, including 
suggestions for reducing this burden to Information Collection 
Clearance Officer, Federal Aviation Administration, 10101 Hillwood 
Parkway, Fort Worth, TX 76177-1524.

(j) Related Information

    For more information about this AD, contact Sanjay Ralhan, 
Aerospace Engineer, International Section, Transport Standards 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 
and fax 206-231-3223; email [email protected].

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2019-0233, 
dated September 18, 2019; corrected September 19, 2019.
    (ii) [Reserved]
    (3) For information about EASA AD 2019-0233, contact the EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 
89990 6017; email [email protected]; Internet www.easa.europa.eu. 
You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.
    (4) You may view this material at the FAA, Transport Standards 
Branch, 2200 South 216th St., Des Moines, WA. For information on the 
availability of this material at the FAA, call 206-231-3195. This 
material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-
2019-0982.
    (5) You may view this material that is incorporated by reference 
at the National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, email 
[email protected], or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on March 4, 2020.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. 2020-05764 Filed 3-19-20; 8:45 am]
 BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.