Certain New Chemicals; Receipt and Status Information for January 2020, 13891-13900 [2020-04891]
Download as PDF
<![CDATA[
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
Environmental commenters will be
placed on the Commission’s
environmental mailing list and will be
notified of any meetings associated with
the Commission’s environmental review
process. Environmental commenters
will not be required to serve copies of
filed documents on all other parties.
However, the non-party commenters
will not receive copies of all documents
filed by other parties or issued by the
Commission and will not have the right
to seek court review of the
Commission’s final order.
As of the February 27, 2018 date of
the Commission’s order in Docket No.
CP16–4–001, the Commission will
apply its revised practice concerning
out-of-time motions to intervene in any
new Natural Gas Act section 3 or section
7 proceeding.1 Persons desiring to
become a party to a certificate
proceeding are to intervene in a timely
manner. If seeking to intervene out-oftime, the movant is required to ‘‘show
good cause why the time limitation
should be waived,’’ and should provide
justification by reference to factors set
forth in Rule 214(d)(1) of the
Commission’s Rules and Regulations.2
The Commission strongly encourages
electronic filings of comments, protests
and interventions in lieu of paper using
the ‘‘eFiling’’ link at https://
www.ferc.gov. Persons unable to file
electronically should submit an original
and 3 copies of the protest or
intervention to the Federal Energy
regulatory Commission, 888 First Street
NE, Washington, DC 20426.
Comment Date: 5:00 p.m. Eastern
Standard Time on March 25, 2020.
Resources Control Board waived its
authority to issue a certification for the
South Feather Power Project under
Section 401 of the Clean Water Act, 33
U.S.C. 1341(a)(1), as more fully
explained in the filing.
Any person wishing to comment on
South Feather Water Agency’s request
may do so.1 The deadline for filing
comments is 30 days from the issuance
of this notice. The Commission
encourages electronic submission of
comments in lieu of paper using the
‘‘eFiling’’ link at https://www.ferc.gov.
Persons unable to file electronically
should send comments to the following
address: Federal Energy Regulatory
Commission, 888 First Street NE,
Washington, DC 20426. Be sure to
reference the project docket number (P–
2088–068) with your submission.
This filing is accessible on-line at
https://www.ferc.gov, using the
‘‘eLibrary’’ link and is available for
review in the Commission’s Public
Reference Room in Washington, DC.
There is an ‘‘eSubscription’’ link on the
website that enables subscribers to
receive email notification when a
document is added to a subscribed
docket(s). For assistance with any FERC
Online service, please email
FERCOnlineSupport@ferc.gov, or call
(866) 208–3676 (toll free). For TTY, call
(202) 502–8659.
Comment Date: 5:00 p.m. Eastern
Time on April 3, 2020.
Dated: March 4, 2020.
Nathaniel J. Davis, Sr.,
Deputy Secretary.
[FR Doc. 2020–04878 Filed 3–9–20; 8:45 am]
BILLING CODE 6717–01–P
Dated: March 4, 2020.
Nathaniel J. Davis, Sr.,
Deputy Secretary.
ENVIRONMENTAL PROTECTION
AGENCY
[FR Doc. 2020–04872 Filed 3–9–20; 8:45 am]
BILLING CODE 6717–01–P
[EPA–HQ–OPPT–2020–0077; FRL–10005–
73]
DEPARTMENT OF ENERGY
Certain New Chemicals; Receipt and
Status Information for January 2020
Federal Energy Regulatory
Commission
khammond on DSKJM1Z7X2PROD with NOTICES
South Feather Water and Power
Agency; Notice of Request for Waiver
Determination
Take notice that on December 12,
2019, South Feather Water and Power
Agency, applicant for relicensing the
South Feather Power Project No. 2088,
filed a letter requesting the Commission
find that the California State Water
1 Tennessee Gas Pipeline Company, L.L.C., 162
FERC ¶ 61,167 at ¶ 50 (2018).
2 18 CFR 385.214(d)(1).
VerDate Sep<11>2014
17:20 Mar 09, 2020
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
[Project No. 2088–068]
Jkt 250001
EPA is required under the
Toxic Substances Control Act (TSCA) to
make information publicly available and
to publish information in the Federal
Register pertaining to submissions
under TSCA, including notice of receipt
SUMMARY:
1 South Feather Water and Power Agency’s
request is part of its relicensing proceeding in
Project No. 2088–068. Thus, any person that
intervened in the relicensing proceeding is already
a party. The filing of the request does not trigger
a new opportunity to intervene.
PO 00000
Frm 00035
Fmt 4703
Sfmt 4703
13891
of a Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 01/01/2020 to
01/31/2020.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
April 9, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2020–0077,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
E:\FR\FM\10MRN1.SGM
10MRN1
13892
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
I. Executive Summary
khammond on DSKJM1Z7X2PROD with NOTICES
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
01/01/2020 to 01/31/2020. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the TSCA, 15 U.S.C. 2601 et
seq., a chemical substance may be either
an ‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
PO 00000
Frm 00036
Fmt 4703
Sfmt 4703
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g. P–18–
1234A). The version column designates
E:\FR\FM\10MRN1.SGM
10MRN1
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
versions were rejected as incomplete or
invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
13893
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance.
(G) Production of
biofuel.
(G) Production of
biofuel.
(G) a chemical
reactant used in
manufacturing a
polymer.
(G) Use as a polyol
for polyurethane
manufacture. Reaction of the new
substance with a
diisocyanate or
polyisocyanate in
a blend with other
polyols will
produce a higher
MW polymer. (S)
Used as a feedstock for hydrogenation to
produce a saturated diol for use
in urethane chemistry or as an additive in coatings,
adhesives or
sealants.
(G) Use as a polyol
for polyurethane
manufacture. Reaction of the new
substance with a
diisocyanate or
polyisocyanate
and other polyols
will produce a
higher MW polymer. (S) Used as
a feedstock for hydrogenation to
produce a saturated diol for use
in urethane chemistry or as an additive in coatings,
adhesives or
sealants.
(G) Additive, open,
non-dispersive use.
(G) Biofuel-producing modified microorganism(s), with chromosomallyborne modifications.
(G) Biofuel-producing modified microorganism(s), with chromosomallyborne modifications.
(G) amino-silane.
J–19–0026A .............
4
01/14/2020
CBI .....................
J–19–0027A .............
4
01/14/2020
CBI .....................
P–16–0425A ............
4
01/31/2020
CBI .....................
P–17–0117A ............
4
01/29/2020
CBI .....................
P–17–0118A ............
4
01/29/2020
CBI .....................
P–17–0230A ............
4
01/21/2020
CBI .....................
P–17–0235A ............
P–17–0333A ............
6
6
12/19/2019
01/16/2020
CBI .....................
Miwon North
America, Inc.
P–17–0395A ............
6
01/24/2020
CBI .....................
P–18–0007A ............
3
12/20/2019
Nexoleum USA
Corp.
P–18–0007A ............
4
12/27/2019
Nexoleum USA
Corp.
P–18–0008A ............
3
12/20/2019
Nexoleum USA
Corp.
P–18–0008A ............
4
12/27/2019
Nexoleum USA
Corp.
P–18–0012A ............
P–18–0031A ............
6
7
12/19/2019
01/09/2020
CBI .....................
CBI .....................
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00037
(G) Anti-agglomerate
(S) Reactive diluent
for optical film
coating.
(G) Water treatment
additive.
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(G) Adhesives .........
(G) Ingredient for industrial coating.
Fmt 4703
Sfmt 4703
(S)
1,6,10-Dodecatriene,
7,11-dimethyl-3-methylene-,
homopolymer, 2-hydroxypropyl-terminated.
(6E)-,
(S)
1,6,10-Dodecatriene,
7,11-dimethyl-3-methylene-,
homopolymer, 2-hydroxyethyl-terminated.
(6E)-,
(G) Oxirane, 2-alkyl-, polymer with oxirane, mono[N-[3(carboxyamino)-4(or 6)-alkylphenyl]carbamate], alkyl ether, ester
with 2,2′,2″-nitrilotris-[alkanol].
(G) Amidoamino quaternary ammonium salt.
(G) 2-Propenoic acid, mixed esters with heterocyclic dimethanol and
heterocyclic methanol.
(G) Alkyl tri dithiocarbmate tri salt.
(S) Glycerides, soya mono- and di-, epoxidized, acetates.
(S) Glycerides, soya mono- and di-, epoxidized, acetates.
(S) Glycerides, C16–18 and C18-unsatd. mono- and di-, epoxidized,
acetates.
(S) Glycerides, C16–18 and C18-unsatd. mono- and di-, epoxidized,
acetates.
(G) Polyester polyol.
(G) Substituted dicarboxylic acid, polymer with various alkanediols.
E:\FR\FM\10MRN1.SGM
10MRN1
13894
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance.
(S) Component of
electroconductive
low-noise grease
for long-term lubrication of capped
or sealed ball
bearings.
(G) This material is
used as a lubricant additive for
applications such
as stamping, forming, cutting, drilling, or otherwise
working metals.
(G) Adjuvant agent ..
(S) Phosphonium, trihexyltetradecyl-, salt with 1,1,1-trifluoro-N[(trifluoromethyl)sulfonyl]methanesulfonamide (1:1).
P–18–0058A ............
3
01/29/2020
CBI .....................
P–18–0063A ............
3
01/16/2020
Ethox Chemicals,
LLC.
P–18–0067A ............
4
01/12/2020
CBI .....................
P–18–0070A ............
10
12/20/2019
Arrowstar, LLC ...
P–18–0093A ............
4
12/19/2019
CBI .....................
P–18–0094A ............
4
12/19/2019
CBI .....................
P–18–0095A ............
4
12/19/2019
CBI .....................
P–18–0104A ............
7
01/28/2020
CBI .....................
P–18–0108A ............
2
01/20/2020
CBI .....................
P–18–0151A ............
7
12/17/2019
Struers, Inc ........
P–18–0151A ............
8
01/28/2020
Struers, Inc. .......
P–18–0173A ............
3
01/13/2020
CBI .....................
P–18–0187A ............
P–18–0226A ............
P–18–0307A ............
4
6
3
01/09/2020
12/19/2019
01/16/2020
CBI .....................
CBI .....................
CBI .....................
P–18–0328A ............
2
01/06/2020
CBI .....................
P–18–0329A ............
2
12/19/2019
CBI .....................
P–19–0002A ............
5
12/17/2019
CBI .....................
P–19–0003A ............
4
12/17/2019
CBI .....................
P–19–0004A ............
4
12/17/2019
CBI .....................
P–19–0048A ............
4
12/18/2019
CBI .....................
(G) Coating additive
P–19–0048A ............
5
12/19/2019
CBI .....................
(G) Coating additive
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00038
(G) Chemical intermediate for polyurethane industry.
(G) Additive to plastics.
(G) Additive to plastics.
(G) Additive to plastics.
(S) Halogen free
flame retardant in
thermoplastic polymers.
(G) Ionic salt of a
polyamic acid for
coatings, open,
non-dispersive use.
(S) A curing agent
for curing epoxy
systems.
(S) A curing agent
for curing epoxy
systems.
(S) Thickener for
paint and coatings.
(G) Emulsifier ..........
(G) Anti-agglomerate
(G) Binder resin in
coatings.
(G) Chemical intermediate for the
manufacture of
plasticizer.
(G) Component of
lenses used in
electronic applications.
(S) Chemical Intermediate.
(S) Chemical Intermediate.
(G) molded parts
and components.
Fmt 4703
Sfmt 4703
(G) alcohol alkoxylate phosphate.
(S) Fatty acids, C14–18 and C16–18-unsatd., polymers with adipic
acid and triethanolamine, di-Me sulfate-quaternized.
(G) Waste plastics, polyester, depolymd. with glycols, polymers with
dicarboxylic acids.
(G)
Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane,
1,3,5,7,9,11,13,15-octakis (polyfluoroalkyl)-.
(G)
Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxanealkylsubstituted,
3,5,7,9,11,13,15-heptakis(polyfluoroalkyl)-.
(G)
Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxanealkanol,
3,5,7,9,11,13,15-heptakis(polyfluoroalkyl)-, acetate.
(G) Acrylic acid, reaction products with pentaerythritol, polymerized.
(G) Aromatic anhydride polymer with bisalkylbiphenylbisamine compound with alkylaminoalkyl acrylate ester.
(S) Formaldehyde, reaction products with 1,3-benzenedimethanamine
and p-tert-butylphenol.
(S) Formaldehyde, reaction products with 1,3-benzenedimethanamine
and p-tert-butylphenol.
(G) Poly (oxy1,2-alkydiyl) hydroxy polymer with cyanoato butylalcohol.
(G) Carboxylic acid-polyamine condensate.
(G) Tri alkyl, mono alkoxy, fatty acid ester, ammonium salt.
(G) Alkyl Alkenoic acid, alkyl ester, telomer with alkyl alkenoate, substituted alkyl alkyl alkenoate, alkylthiol, substituted carbomonocycle,
hydroxyalkyl alkyl alkenoate and alkyl alkyl alkenoate.
(G) Plant oil fatty acids, alkyl esters.
(G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer
with alkanediol and carbopolycyclic bis (substituted carbopolycycle)
bisalkanol.
(G) Polyaromatic symmetrical tetracarboxylic acid.
(G) Polyaromatic ether symmetrical dicarboxylic anhydride.
(G) Aromatic dianhydride, polymer with aromatic diamine and
heteroatom bridged aromatic diamine, reaction products with aromatic anhydride.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, monoC12–14-alkyl ethers, phosphates, sodium salts.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, monoC12–14-alkyl ethers, phosphates, sodium salts.
E:\FR\FM\10MRN1.SGM
10MRN1
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
13895
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
(S) Used as a surface treatment,
sealant, caulk, and
coating for mineral
building materials
such as concrete,
brick, limestone,
and plaster, as
well as on wood,
metal and other
substrates. Formulations containing
the cross-linker
provide release
and anti-graffiti
properties, water
repellency, weather proofing, and
improved bonding
in adhesive/sealant applications.
The new substance is a moisture curing crosslinking agent
which binds/joins
polymers together
when cured. Ethanol is released
during cure, and
once the cure reaction is complete,
the product will remain bound in the
cured polymer matrix.
(G) Consumer Disposables, (G)
Polymer Sheet,
(G) Durable
Goods.
(G) Well performance monitor.
(S) Chemical is used
as a component of
a cleaning formulation to improve
the wettability of
the overall cleaning solution on the
substrate.
(S) Chemical is used
as a component of
a cleaning formulation to improve
the wettability of
the overall cleaning solution on the
substrate.
(S) Chemical is used
as a component of
a cleaning formulation to improve
the wettability of
the overall cleaning solution on the
substrate.
(S) A crosslinking
agent for use in
epoxy resin for
water-based coating for a variety of
substrates and
civil applications in
commercial and
consumer usages.
P–19–0053A ............
6
12/20/2019
Wacker Chemical
Corporation.
P–19–0095A ............
6
01/23/2020
CBI .....................
P–19–0103A ............
5
01/06/2020
CBI .....................
P–19–0109A ............
5
01/09/2020
Arch Chemicals,
Inc.
P–19–0109A ............
6
01/14/2020
Arch Chemicals,
Inc.
P–19–0109A ............
7
01/23/2020
Arch Chemicals,
Inc.
P–19–0143A ............
5
12/23/2019
Aditya Birla
Chemicals
(USA), LLC.
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00039
Fmt 4703
Sfmt 4703
Chemical substance.
(S) 1-Butanamine, N-butyl-N-[(triethoxysilyl)methyl]-.
(G) Poly hydroxy alkanoate.
(G) Halogenated benzoic acid, ethyl ester.
(S) Copper, [[2,2′,2″-(nitrilo-.kappa.N)tris[ethanolato-.kappa.O]](2-)]-;
(S) Copper, bis[2-(amino-.kappa.N)ethanolato-.kappa.O]-;.
(S) Copper, [[2,2′,2″-(nitrilo-.kappa.N)tris[ethanol-.kappa.O]](2-)]-; (S)
Copper, bis[2-(amino-.kappa.N)ethanolato-.kappa.O]-;.
(S) Copper, [[2,2′,2″-(nitrilo-.kappa.N)tris[ethanolato-.kappa.O]](2-)];(S) Copper, bis[2-(amino-.kappa.N)ethanolato-.kappa.O]-;.
(G) Aldehyde, polymer with mixed alkanepolyamines, 2,2′-[1,4alkanediylbis(oxyalkylene)] bis[oxirane], 2-(alkoxyalkyloxirane, 4,4′(1-alkylidene)bis[phenol],
2,2′-[(1-alkylidene)bis(4,1alkyleneoxyalkylene)]bis[oxirane] and 2-(aryloxyalkyl)oxirane, acetate (salt).
E:\FR\FM\10MRN1.SGM
10MRN1
13896
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance.
(G) Alkanedioic Acid, compds. With substituted arylalkylaminearylalcohol disubstituted alkane-the diglycidyl ether of a arylalcohol
disubstituted
alkane
-epichlorohydrin-aldehyde-2,2′-[(1alkylidene)bis[4,1-aryleneoxy(alkyl-2,1alkanediyl)oxyalkylene]]bis[oxirane]-alkanepolyamine polymer-1-[[2[(2-aminoalkyl)amino]alkyl]amino]-3-aryloxy-2-alcohol reaction products.
(S) Amides, from C8–18 and C18-unsatd. glycerides and
diethylenetriamine, ethoxylated.
P–19–0144A ............
5
12/23/2019
Aditya Birla
Chemicals
(USA), LLC.
(S) A crosslinking
agent in epoxy
based self-leveling
floor coatings.
P–19–0155A ............
5
12/17/2019
Huntsman International, LLC.
P–19–0156A ............
5
12/17/2019
Huntsman International, LLC.
P–19–0157A ............
5
12/17/2019
Huntsman International, LLC.
P–19–0158A ............
6
01/06/2020
Ashland, Inc. ......
(S) Adjuvant for
agrochemical formulations.
(S) Adjuvant for
agrochemical formulations.
(S) Adjuvant in
agrochemical formulations.
(G) Adhesive ...........
P–19–0164A ............
2
01/03/2020
Allnex USA, Inc.
P–19–0166A ............
2
01/30/2020
P–19–0168A ............
5
12/19/2019
Fujifilm Electronic
Materials USA,
Inc.
CBI .....................
P–19–0169A ............
5
12/19/2019
CBI .....................
P–20–0010A ............
3
01/07/2020
CBI .....................
P–20–0015 ...............
4
01/13/2020
GE Healthcare ...
P–20–0025A ............
2
12/17/2019
Biosynthetic
Technologies.
P–20–0025A ............
3
01/07/2020
Biosynthetic
Technologies.
P–20–0026A ............
3
01/13/2020
GE Healthcare ...
P–20–0027 ...............
5
01/10/2020
H.B. Fuller Company.
(G) Well performance tracer.
(G) Well performance monitor.
(G) Polymerization
auxiliary.
(S) The polymer is
used in the manufacture of hollow
fiber products.
(S) Motor oil lubricant, formulation
#1 (prepared at a
processor which is
controlled by others),(S) Motor oil
lubricant, formulation #2 (prepared
at a processor
which is controlled
by others).
(S) Motor oil lubricant, formulation
#1 (prepared at a
processor which is
controlled by others),(S) Motor oil
lubricant, formulation #2 (prepared
at a processor
which is controlled
by others).
(S) The new monomer is isolated
and used for subsequent polymerization.
(S) Industrial Adhesives.
P–20–0028 ...............
5
01/10/2020
H.B. Fuller Company.
(S) Industrial Adhesives.
P–20–0029A ............
3
01/14/2020
P–20–0031 ...............
3
01/06/2020
Kuraray America,
Inc.
CBI .....................
(G) Oil soluble additive.
(G) Intermediate ......
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00040
(S) Site limited intermediate for coating resin manufacture.
(G) Photoacid generator (PAG).
Fmt 4703
Sfmt 4703
(S) Amides, from diethylenetriamine and palm kernel-oil, ethoxylated.
(S) Amides, from coconut oil and diethylenetriamine, ethoxylated.
(G) Alkenoic acid polymer with 2-ethyl-2-(hdroxymethyl)-1,3-alkyldiol,
1,1′-methylenebis(4-isocyantocarbomonocycle) and 3-methyl-1,5aklydiol.
(G) Bis-alkoxy substituted alkane, polymer with aminoalkanol.
(G) Triarylsulfonium alkylestersulfonate,.
(G) Halogenated alkylbenzoic acid.
(G) Halogenated alkylbenzoic acid.
(G) Carboxylic acid, reaction products with metal hydroxide, inorganic
dioxide and metal.
(G) Zwitterionic polysulfone polymer;(G) N-alkyl heteromonocyclic
diphenolamide, polymer with Bisphenol A, haloaryl-substituted
sulfone, compd. with cyclic sulfonate ester, polyaryl alcohol terminated.
(S) Octadecanoic acid, 12-(acetoxy)-, 2-ethylhexyl ester.
(S) Octadecanoic acid, 12-(acetoxy)-, 2-ethylhexyl ester.
(G) N-alkyl heteromonocyclic diphenolamide.
(G) Glycols, alpha, omega-, c2–6, polymers with adipic acid,
dodecanedioic acid, hydracrylic acid polyester, isophthalic acid,
1,1′-methylenebis[4-isocyanatobenzene], neopentyl glycol and terephthalic acid.
(G) glycols, alpha, omega-, c2–6, polymers with adipic acid, aromatic
polyester, dodecanedioic acid, hydracrylic acid polyester, isophthalic acid, 1,1′-methylenebis[4-isocyanatobenzene], neopentyl
glycol and terephthalic acid.
(S) Octanal, 7(or 8)-formyl-.
(G) Perfluorinated substituted 1,3-oxathiolane dioxide.
E:\FR\FM\10MRN1.SGM
10MRN1
13897
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
(S) Talathol PO3,
the material for
which this notice is
filed, is intended to
be used as a copolymer in the production of urethane foam or
coating. This is intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing prefabricated buildings.
(S) Talathol PO3,
the material for
which this notice is
filed, is intended to
be used as a copolymer in the production of urethane foam or
coating. This is intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing prefabricated buildings.
(G) Intermediate ......
(G) Intermediate ......
(G) Colorant ............
P–20–0032A ............
2
01/15/2020
Engineered
Bonded Structures and
Composites.
P–20–0032A ............
3
01/24/2020
Engineered
Bonded Structures and
Composites.
P–20–0033 ...............
P–20–0034 ...............
P–20–0035A ............
2
2
2
01/06/2020
01/06/2020
01/21/2020
CBI .....................
CBI .....................
CBI .....................
P–20–0039 ...............
2
01/12/2020
P–20–0040 ...............
4
01/06/2020
Miwon North
America, Inc.
CBI .....................
P–20–0041 ...............
2
01/07/2020
Kuraray America,
Inc.
P–20–0042 ...............
2
01/08/2020
CBI .....................
P–20–0042A ............
3
01/14/2020
CBI .....................
P–20–0044 ...............
1
01/23/2020
Angus Chemical
Company.
VerDate Sep<11>2014
17:20 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00041
(S) Resins for Industrial coating.
(G) Additive for use
in inks, coatings,
adhesives and
sealants.
(G) Chemical Intermediate for Coatings.
(G) Photoresist use
at customer.
(G) Photoacid generator use at customer.
(G) curing additive:
automotive paint
(G) neutralization,
stability and pigment dispersancy
in industrial latex
paints (G) neutralization,
solubilization and
stability in commercial waterborne and solvent
borne coatings
and varnishes
used for wood,
metal,
compositites, and
other substrates
(G) solubilizer for
high acid value
styrene acrylic
polymers for use
in ink applications
(G) additive for industrial polyurethane dispersions.
Fmt 4703
Sfmt 4703
Chemical substance.
(G) Polyethylene terephthalate polyol.
(G) Polyethylene terephthalate polyol.
(G) Perfluorinated vinyl haloalkane sulfonate salt.
(G) Perfluorinated vinyl haloalkane sulfonyl halide.
(G) Substituted aromatic, 3,3′-[[6-[(substituted alkyl amino)]-1,3,5-triazine-2,4-diyl]bis[imino[2-(substituted)-5-[substituted
alkoxy]-4,1phenylene]-2,1- diazenediyl]]bis[substituted, sodium salt].
(G) Hexanedioic acid, polymer with alkyl(substituted-alkyl)-alkanediol
and 1,3-isobenzofurandione, 2-propenoate.
(G) 2-Propenoic acid, cycloalkyl ester,.
(S) 1,3-Benzenedicarboxylic
pentanediol.
acid,
(G)
Sulfonium,
trisaryl-,
alkanesulfonate (1:1).
(G)
Sulfonium,
trisaryl-,
alkanesulfonate (1:1).
polymer
10MRN1
3-methyl-1,5-
7,7-dialkyl-2-heteropolycyclic
-1-
7,7-dialkyl-2-heteropolycyclic
-1-
(S) 1-Propanamine, 3-methoxy-N,N-dimethyl.
E:\FR\FM\10MRN1.SGM
with
13898
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance.
(G) Reaction products of alkyl-terminated alkylalumuminoxanes and
{[(pentaalkylphenyl(pentaalkylphenyl)amino)alkyl]alkanediaminato}bis(aralkyl) transition
metal coordination compound.
(S) 1,8-Octanediamine, 4-(aminomethyl)-, N-benzyl derivs.
P–20–0046 ...............
1
01/28/2020
CBI .....................
(G) Catalyst .............
P–20–0051 ...............
1
01/31/2020
CBI .....................
SN–17–0011A ..........
3
01/16/2020
CBI .....................
(S) Curing agent for
Industrial epoxy
coating systems.
(G) Foam additive
(G) Specialty gas
and transfer fluid.
(G) Polyfluorohydrocarbon.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 01/01/2020 TO 01/31/2020
khammond on DSKJM1Z7X2PROD with NOTICES
Case No.
Commencement
date
Received
date
If amendment,
type of amendment
Chemical substance
(G) Modified trichoderma reesei.
(S) Soil organic matter, alkaline extract, potassium
salt.
(G) 2-propenoic acid, homopolymer, ester with
.alpha.-methyl-polyether compd. with
aminoalcohol.
(G) 12-hydroxystearic acid, reaction products with
alkylene diamine and alkanoic acid.
(S) Ethanone, 1-(5-propyl-1,3-benzodioxol-2-yl)-.
(G) Modified ethylene-vinyl alcohol copolymer.
(G) Rosin, tall oil, reaction products with
polyalkylene-polysubstituted-terephthalic acid
polymer.
(S) 1,3,5-naphthalene trisulfonic acid trisodium salt.
(G) Vegetable oil, polymer with alkanedioic acid, alkali lignin, diethylene glycol- and polyol-depolymd.
poly(ethylene terephthalate) waste plastics.
(S) Waste plastics, pyrolyzed, depolymd., c11 to
c33 branched,cyclic and linear fraction.a complex
combination of hydrocarbons obtained from the
fractional condensation of polyolefins and vinyl
polymers waste plastics. it consists predominately
of c11 to c33 branched, cyclic and linear hydrocarbons and boils in the range of 350 degrees c
to 450 degrees c(662 degrees f to 842 degrees f).
(S) Waste plastics, pyrolyzed, depolymd., c7 to c26branched, cyclic and linear fraction. a complex
combination of hydrocarbons obtained from the
fractional condensation of polyolefins and vinyl
polymers waste plastics. it consists of predominately c7 to c26 branched, cyclic and linear hydrocarbons and boils in the range of 0 degrees c
to 350 degrees c (32 degrees f to 662 degrees f).
(S) Benzoic acid, 2,3,5-trifluoro-, ethyl ester.
(S) Benzoic acid, 2,3,6-trifluoro-, ethyl ester.
(S) Benzoic acid, 2,4,6-trifluoro-, ethyl ester.
(S) Benzoic acid, 2,3,5-trichloro-,ethyl ester.
(S) Benzoic acid, 2,3,6-trichloro-,ethyl ester.
(S) Benzoic acid, 2,4,6-trichloro-,ethyl ester.
(S) Benzoic acid, 2,3,4-trichloro-,ethyl ester.
(S) Benzoic acid, 2,4,5-trichloro-,ethyl ester.
(S) Benzoic acid, 2,4,6-trilfuoro.
(S) Benzoic acid, 2,4,6-trifluoro-.
(S) Benzoic acid, 2,3,6-trifluoro-.
(S) Benzoic acid, 2,3,6-trichloro-.
J–16–0022 ........................
P–10–0002 ........................
01/27/2020
12/16/2019
01/27/2020
12/16/2019
N ......................................
N ......................................
P–10–0438 ........................
01/07/2020
07/19/2011
N ......................................
P–16–0310A .....................
12/18/2019
04/09/2018
Generic chemical name ...
P–16–0314 ........................
P–16–0509 ........................
P–16–0573 ........................
01/28/2020
01/13/2020
01/09/2020
01/23/2020
12/17/2019
02/07/2018
N ......................................
N ......................................
N ......................................
P–17–0321 ........................
P–17–0368 ........................
01/09/2020
01/06/2020
01/09/2020
01/05/2020
N ......................................
N ......................................
P–17–0398 ........................
01/10/2020
11/07/2019
N ......................................
P–17–0399 ........................
01/10/2020
11/07/2019
N ......................................
P–17–0405
P–17–0406
P–17–0407
P–17–0408
P–17–0409
P–17–0410
P–17–0411
P–17–0412
P–17–0414
P–17–0415
P–17–0416
P–17–0417
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
N
N
N
N
N
N
N
N
N
N
N
N
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
........................
VerDate Sep<11>2014
20:00 Mar 09, 2020
Jkt 250001
PO 00000
Frm 00042
......................................
......................................
......................................
......................................
......................................
......................................
......................................
......................................
......................................
......................................
......................................
......................................
Fmt 4703
Sfmt 4703
E:\FR\FM\10MRN1.SGM
10MRN1
13899
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE II—NOCS APPROVED * FROM 01/01/2020 TO 01/31/2020—Continued
Commencement
date
Received
date
Case No.
If amendment,
type of amendment
Chemical substance
(S) Benzoic acid, 2,4,6-trichloro-.
(S) Benzoic acid, 2,3,5-trichloro-.
(S) Benzoic acid, 3,4,5-trichloro-.
(S) Benzoic acid, 2,4,5-trichloro-.
(S) Benzoic acid, 3,4,5-trichloro-, ethyl ester.
(S) Benzoic acid, 2,4,6-trifluoro-, sodium salt (1:1).
(S) Benzoic acid, 2,3,5-trifluoro-, sodium salt (1:1).
(S) Benzoic acid, 2,3,6-trifluoro-, sodium salt (1:1).
(S) Benzoic acid, 2,3,6-trichloro-, sodium salt (1:1).
(S) Benzoic acid, 2,3,5-trichloro-, sodium salt (1:1).
(S) Benzoic acid, 2,4,6-trichloro-, sodium salt (1:1).
(S) Benzoic acid, 2,4,5-trichloro-, sodium salt (1:1).
(S) Benzoic acid, 3,4,5-trichloro-, sodium salt (1:1).
(S) Benzoic acid, 2,3,4-trichloro-, sodium salt (1:1).
(S) 2,5-dichlorobenzoic acid.
(G) Fluorinated acrylate, polymer with alkyloxirane
homopolymer monoether with alkanediol mono(2methyl-2-propenoate), tert-bu 2ethylhexaneperoxoate-initiated.
(G) Vegetable oil, polymers with diethylene glycoland polyol- and polyethylene glycol-depolymd.
poly(ethylene terephthalate) waste plastics and
arylcarboxylic acid anhydride.
(G) Polyol esters.
(G) Phenolic resin, alkali, polymer with formaldehyde and phenol, sodium salt.
(G) Alkenoic acid, reaction products with bis substituted alkane and ether polyol,.
(S) Butanedioic acid, 2-methylene-, polymer with 2methyl- 2-[(1-oxo-2-propen-1-yl)amino]-1propanesulfonic acid, sodium zinc salt.
(S) 2-oxazolidinone, 3-ethenyl-5-methyl-.
(S) Glycerides, c16–18 and ci8-unsatd. mono- and
di-, citrates.
(G) Phenol, alkanediylbis(iminoalkylene)bis-,
bis(polyisoalkylene) derivs.
(G) Metal, bis(2,4-pentanedionato-ko2,ko4)-, (t-4)-,.
(S) Benzoic acid, 5-fluoro-2-methyl-, ethyl ester.
(S) Benzoic acid, 3-chloro-2-fluoro-, ethyl ester.
(S) Benzoic acid, 2-chloro-3-methyl-, ethyl ester.
(S) Benzoic acid, 2-chloro-4-methyl-, ethyl ester.
(G) Substituted polylalkylenepoly, reaction products
with alkene polymer.
(G) Modified dimethyl sulfoxide.
P–17–0418 ........................
P–17–0420 ........................
P–17–0421 ........................
P–17–0422 ........................
P–17–0423 ........................
P–17–0441A .....................
P–17–0442 ........................
P–17–0443 ........................
P–17–0444 ........................
P–17–0445 ........................
P–17–0446 ........................
P–17–0447 ........................
P–17–0448 ........................
P–17–0449 ........................
P–17–0450 ........................
P–18–0018 ........................
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
01/06/2020
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/31/2019
12/11/2019
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
Withdrew CBI claim .........
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
N ......................................
P–18–0091 ........................
01/06/2020
01/05/2020
N ......................................
P–18–0101 ........................
P–18–0179 ........................
12/27/2019
01/20/2020
12/06/2019
01/13/2020
N ......................................
N ......................................
P–18–0234 ........................
01/08/2020
12/09/2019
N ......................................
P–18–0285 ........................
01/07/2020
12/27/2019
N ......................................
P–18–0392 ........................
P–18–0401 ........................
01/17/2020
01/21/2020
01/04/2020
12/26/2019
N ......................................
N ......................................
P–18–0402 ........................
12/20/2019
12/19/2019
N ......................................
P–19–0034
P–19–0097
P–19–0103
P–19–0104
P–19–0108
P–19–0118
........................
........................
........................
........................
........................
........................
01/20/2020
12/18/2019
01/09/2020
12/18/2019
12/18/2019
01/10/2020
01/07/2020
12/18/2019
01/01/2020
12/18/2019
12/18/2019
12/13/2019
N
N
N
N
N
N
P–19–0146 ........................
12/18/2019
12/03/2019
N ......................................
......................................
......................................
......................................
......................................
......................................
......................................
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 01/01/2020 TO 01/31/2020
Case No.
khammond on DSKJM1Z7X2PROD with NOTICES
L–20–0055 ...............................
VerDate Sep<11>2014
20:00 Mar 09, 2020
Received
date
01/27/2020
Jkt 250001
Type of test information
Chemical substance
Ames Test ................................................................................
(G) Imidazo[4,5-d]imidazole2,5(1h,3h)-dione, tetrahydrosubstituted alkyl-.
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
E:\FR\FM\10MRN1.SGM
10MRN1
13900
Federal Register / Vol. 85, No. 47 / Tuesday, March 10, 2020 / Notices
TABLE III—TEST INFORMATION RECEIVED FROM 01/01/2020 TO 01/31/2020—Continued
Received
date
Case No.
Chemical substance
P–16–0349 ..............................
01/20/2020
P–16–0462 ..............................
01/21/2020
P–17–0195 ..............................
01/15/2020
P–18–0293 ..............................
12/18/2019
P–18–0293 ..............................
01/22/2020
P–18–0294 ..............................
01/24/2020
P–18–0294 ..............................
01/15/2020
An Acute Study of Chemilian H4000 XP by Oral Gavage in
Rat (Fixed Dose Method).
P–18–0351 ..............................
01/16/2020
Drum Emptying Study ..............................................................
P–19–0147 ..............................
12/20/2019
Algal Study Supplement ...........................................................
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 4, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2020–04891 Filed 3–9–20; 8:45 am]
BILLING CODE 6560–50–P
FARM CREDIT ADMINISTRATION
Privacy Act of 1974; System of
Records
Farm Credit Administration.
Notice of a Modified System of
Records.
AGENCY:
ACTION:
Pursuant to the provisions of
the Privacy Act of 1974, as amended,
notice is hereby given that the Farm
Credit Administration (FCA or Agency)
is amending an existing system of
records, FCA–1—Employee Attendance,
Leave, and Payroll Records—FCA. The
Employee Attendance, Leave, and
Payroll Records—FCA system is used to
SUMMARY:
khammond on DSKJM1Z7X2PROD with NOTICES
Type of test information
VerDate Sep<11>2014
20:00 Mar 09, 2020
Jkt 250001
Inherent Biodegradability (OECD Test Guideline 302B),
Acute Invertebrate Toxicity Freshwater Daphnids (OCSPP
Test Guideline 850.1010), Fish Acute Toxicity (Rainbow
Trout) Study and Fish Acute Toxicity (Sheepshead Minnow) Study (OCSPP Test Guideline 850.1075), Fish Acute
Toxicity with Humic Acid Rainbow Trout) (OCSPP Test
Guideline 850.1085) and Algae Acute Toxicity Study
(OCSPP 850.4500).
Metals Analysis Report ............................................................
Combined Repeated Dose and Reproductive/Developmental
Toxicity Test of [claimed CBI] by Oral Administration in
Rats (OECD Test Guideline 422).
In vitro Skin Irritation Test with Chemilian L3000 XP using a
Human Skin Model (OECD 439) and In vitro Skin Irritation
Test with Chemilian H4000 XP using a Human Skin Model
(OECD 439).
An Acute Study of Chemilian L3000 XP by Oral Gavage in
Rat (Fixed Dose Method).
An Acute Study of Chemilian H4000 XP by Oral Gavage in
Rat (Fixed Dose Method).
prepare payroll, meet Government
payroll recordkeeping and reporting
requirements, prepare reports, and
retrieve and supply payroll and leave
information as required for Agency
needs. The Agency is updating the
notice to reflect changes to the system
purpose, categories of individuals,
include more details, and make
administrative updates, as well as nonsubstantive changes, to conform to the
SORN template requirements prescribed
in the Office of Management and Budget
(OMB) Circular No. A–108.
DATES: You may send written comments
on or before April 9, 2020. FCA filed an
amended System Report with Congress
and the Office of Management and
Budget on March 5, 2020. This notice
will become applicable without further
publication on April 20, 2020 unless
modified by a subsequent notice to
incorporate comments received from the
public.
ADDRESSES: We offer a variety of
methods for you to submit your
comments. For accuracy and efficiency
reasons, commenters are encouraged to
submit comments by email or through
the FCA’s website. As facsimiles (fax)
are difficult for us to process and
achieve compliance with section 508 of
the Rehabilitation Act, we are no longer
accepting comments submitted by fax.
Regardless of the method you use,
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
(G) Quaternary ammonium
salt of polyisobutene succinic acid.
(G) Silane-treated
aluminosilicate.
(G) 1,3-propanediol,2-methylene-, substituted.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl
ester.
(S) Propanedioic acid, 2-methylene-, 1,3-dicyclohexyl
ester.
(G) Acrylic acid, tricyclo alkyl
ester.
(G) Alkoxylated butyl alkyl
ester.
please do not submit your comment
multiple times via different methods.
You may submit comments by any of
the following methods:
• Email: Send us an email at regcomm@fca.gov.
• FCA Website: https://www.fca.gov.
Click inside the ‘‘I want to . . .’’ field,
near the top of the page; select
‘‘comment on a pending regulation’’
from the dropdown menu; and click
‘‘Go.’’ This takes you to an electronic
public comment form.
• Mail: David Grahn, Director, Office
of Regulatory Policy, Farm Credit
Administration, 1501 Farm Credit Drive,
McLean, VA 22102–5090.
You may review copies of comments
we receive at our office in McLean,
Virginia, or from our website at https://
www.fca.gov. Once you are in the
website, click inside the ‘‘I want to
. . .’’ field, near the top of the page;
select ‘‘find comments on a pending
regulation’’ from the dropdown menu;
and click ‘‘Go.’’ This will take you to the
Comment Letters page, where you can
select the SORN for which you would
like to read public comments. The
comments will be posted as submitted
but, for technical reasons, items such as
logos and special characters may be
omitted. Identifying information that
you provide, such as phone numbers
and addresses, will be publicly
E:\FR\FM\10MRN1.SGM
10MRN1
]]>Agencies
[Federal Register Volume 85, Number 47 (Tuesday, March 10, 2020)]
[Notices]
[Pages 13891-13900]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-04891]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2020-0077; FRL-10005-73]
Certain New Chemicals; Receipt and Status Information for January
2020
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to make information publicly available and to publish information in
the Federal Register pertaining to submissions under TSCA, including
notice of receipt of a Premanufacture notice (PMN), Significant New Use
Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including
an amended notice or test information; an exemption application
(Biotech exemption); an application for a test marketing exemption
(TME), both pending and/or concluded; a notice of commencement (NOC) of
manufacture (including import) for new chemical substances; and a
periodic status report on new chemical substances that are currently
under EPA review or have recently concluded review. This document
covers the period from 01/01/2020 to 01/31/2020.
DATES: Comments identified by the specific case number provided in this
document must be received on or before April 9, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2020-0077, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
[[Page 13892]]
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 01/01/2020 to 01/31/2020. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
[[Page 13893]]
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier versions were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 01/01/2020 to 01/31/2020
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance.
--------------------------------------------------------------------------------------------------------------------------------------------------------
J-19-0026A........................ 4 01/14/2020 CBI.................. (G) Production of (G) Biofuel-producing modified
biofuel. microorganism(s), with chromosomally-borne
modifications.
J-19-0027A........................ 4 01/14/2020 CBI.................. (G) Production of (G) Biofuel-producing modified
biofuel. microorganism(s), with chromosomally-borne
modifications.
P-16-0425A........................ 4 01/31/2020 CBI.................. (G) a chemical (G) amino-silane.
reactant used in
manufacturing a
polymer.
P-17-0117A........................ 4 01/29/2020 CBI.................. (G) Use as a polyol (S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-
for polyurethane methylene-, (6E)-, homopolymer, 2-
manufacture. hydroxypropyl-terminated.
Reaction of the new
substance with a
diisocyanate or
polyisocyanate in a
blend with other
polyols will
produce a higher MW
polymer. (S) Used
as a feedstock for
hydrogenation to
produce a saturated
diol for use in
urethane chemistry
or as an additive
in coatings,
adhesives or
sealants.
P-17-0118A........................ 4 01/29/2020 CBI.................. (G) Use as a polyol (S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-
for polyurethane methylene-, (6E)-, homopolymer, 2-
manufacture. hydroxyethyl-terminated.
Reaction of the new
substance with a
diisocyanate or
polyisocyanate and
other polyols will
produce a higher MW
polymer. (S) Used
as a feedstock for
hydrogenation to
produce a saturated
diol for use in
urethane chemistry
or as an additive
in coatings,
adhesives or
sealants.
P-17-0230A........................ 4 01/21/2020 CBI.................. (G) Additive, open, (G) Oxirane, 2-alkyl-, polymer with oxirane,
non-dispersive use. mono[N-[3-(carboxyamino)-4(or 6)-
alkylphenyl]carbamate], alkyl ether, ester
with 2,2',2''-nitrilotris-[alkanol].
P-17-0235A........................ 6 12/19/2019 CBI.................. (G) Anti-agglomerate (G) Amidoamino quaternary ammonium salt.
P-17-0333A........................ 6 01/16/2020 Miwon North America, (S) Reactive diluent (G) 2-Propenoic acid, mixed esters with
Inc. for optical film heterocyclic dimethanol and heterocyclic
coating. methanol.
P-17-0395A........................ 6 01/24/2020 CBI.................. (G) Water treatment (G) Alkyl tri dithiocarbmate tri salt.
additive.
P-18-0007A........................ 3 12/20/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, soya mono- and di-,
plasticizer/ epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0007A........................ 4 12/27/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, soya mono- and di-,
plasticizer/ epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0008A........................ 3 12/20/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, C16-18 and C18-unsatd. mono-
plasticizer/ and di-, epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0008A........................ 4 12/27/2019 Nexoleum USA Corp.... (S) Used as a (S) Glycerides, C16-18 and C18-unsatd. mono-
plasticizer/ and di-, epoxidized, acetates.
stabilizer for
flexible PVC.
P-18-0012A........................ 6 12/19/2019 CBI.................. (G) Adhesives....... (G) Polyester polyol.
P-18-0031A........................ 7 01/09/2020 CBI.................. (G) Ingredient for (G) Substituted dicarboxylic acid, polymer
industrial coating. with various alkanediols.
[[Page 13894]]
P-18-0058A........................ 3 01/29/2020 CBI.................. (S) Component of (S) Phosphonium, trihexyltetradecyl-, salt
electroconductive with 1,1,1-trifluoro-N-
low-noise grease [(trifluoromethyl)sulfonyl]methanesulfonamid
for long-term e (1:1).
lubrication of
capped or sealed
ball bearings.
P-18-0063A........................ 3 01/16/2020 Ethox Chemicals, LLC. (G) This material is (G) alcohol alkoxylate phosphate.
used as a lubricant
additive for
applications such
as stamping,
forming, cutting,
drilling, or
otherwise working
metals.
P-18-0067A........................ 4 01/12/2020 CBI.................. (G) Adjuvant agent.. (S) Fatty acids, C14-18 and C16-18-unsatd.,
polymers with adipic acid and
triethanolamine, di-Me sulfate-quaternized.
P-18-0070A........................ 10 12/20/2019 Arrowstar, LLC....... (G) Chemical (G) Waste plastics, polyester, depolymd. with
intermediate for glycols, polymers with dicarboxylic acids.
polyurethane
industry.
P-18-0093A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
ne, 1,3,5,7,9,11,13,15-octakis
(polyfluoroalkyl)-.
P-18-0094A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
nealkylsubstituted, 3,5,7,9,11,13,15-
heptakis(polyfluoroalkyl)-.
P-18-0095A........................ 4 12/19/2019 CBI.................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxa
nealkanol, 3,5,7,9,11,13,15-
heptakis(polyfluoroalkyl)-, acetate.
P-18-0104A........................ 7 01/28/2020 CBI.................. (S) Halogen free (G) Acrylic acid, reaction products with
flame retardant in pentaerythritol, polymerized.
thermoplastic
polymers.
P-18-0108A........................ 2 01/20/2020 CBI.................. (G) Ionic salt of a (G) Aromatic anhydride polymer with
polyamic acid for bisalkylbiphenylbisamine compound with
coatings, open, non- alkylaminoalkyl acrylate ester.
dispersive use.
P-18-0151A........................ 7 12/17/2019 Struers, Inc......... (S) A curing agent (S) Formaldehyde, reaction products with 1,3-
for curing epoxy benzenedimethanamine and p-tert-butylphenol.
systems.
P-18-0151A........................ 8 01/28/2020 Struers, Inc......... (S) A curing agent (S) Formaldehyde, reaction products with 1,3-
for curing epoxy benzenedimethanamine and p-tert-butylphenol.
systems.
P-18-0173A........................ 3 01/13/2020 CBI.................. (S) Thickener for (G) Poly (oxy1,2-alkydiyl) hydroxy polymer
paint and coatings. with cyanoato butylalcohol.
P-18-0187A........................ 4 01/09/2020 CBI.................. (G) Emulsifier...... (G) Carboxylic acid-polyamine condensate.
P-18-0226A........................ 6 12/19/2019 CBI.................. (G) Anti-agglomerate (G) Tri alkyl, mono alkoxy, fatty acid ester,
ammonium salt.
P-18-0307A........................ 3 01/16/2020 CBI.................. (G) Binder resin in (G) Alkyl Alkenoic acid, alkyl ester, telomer
coatings. with alkyl alkenoate, substituted alkyl
alkyl alkenoate, alkylthiol, substituted
carbomonocycle, hydroxyalkyl alkyl alkenoate
and alkyl alkyl alkenoate.
P-18-0328A........................ 2 01/06/2020 CBI.................. (G) Chemical (G) Plant oil fatty acids, alkyl esters.
intermediate for
the manufacture of
plasticizer.
P-18-0329A........................ 2 12/19/2019 CBI.................. (G) Component of (G) Substituted carbopolycyclic dicarboxylic
lenses used in acid dialkyl ester, polymer with alkanediol
electronic and carbopolycyclic bis (substituted
applications. carbopolycycle) bisalkanol.
P-19-0002A........................ 5 12/17/2019 CBI.................. (S) Chemical (G) Polyaromatic symmetrical tetracarboxylic
Intermediate. acid.
P-19-0003A........................ 4 12/17/2019 CBI.................. (S) Chemical (G) Polyaromatic ether symmetrical
Intermediate. dicarboxylic anhydride.
P-19-0004A........................ 4 12/17/2019 CBI.................. (G) molded parts and (G) Aromatic dianhydride, polymer with
components. aromatic diamine and heteroatom bridged
aromatic diamine, reaction products with
aromatic anhydride.
P-19-0048A........................ 4 12/18/2019 CBI.................. (G) Coating additive (S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-
.omega.-hydroxy-, mono-C12-14-alkyl ethers,
phosphates, sodium salts.
P-19-0048A........................ 5 12/19/2019 CBI.................. (G) Coating additive (S) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-
.omega.-hydroxy-, mono-C12-14-alkyl ethers,
phosphates, sodium salts.
[[Page 13895]]
P-19-0053A........................ 6 12/20/2019 Wacker Chemical (S) Used as a (S) 1-Butanamine, N-butyl-N-
Corporation. surface treatment, [(triethoxysilyl)methyl]-.
sealant, caulk, and
coating for mineral
building materials
such as concrete,
brick, limestone,
and plaster, as
well as on wood,
metal and other
substrates.
Formulations
containing the
cross-linker
provide release and
anti-graffiti
properties, water
repellency, weather
proofing, and
improved bonding in
adhesive/sealant
applications. The
new substance is a
moisture curing
cross-linking agent
which binds/joins
polymers together
when cured. Ethanol
is released during
cure, and once the
cure reaction is
complete, the
product will remain
bound in the cured
polymer matrix.
P-19-0095A........................ 6 01/23/2020 CBI.................. (G) Consumer (G) Poly hydroxy alkanoate.
Disposables, (G)
Polymer Sheet, (G)
Durable Goods.
P-19-0103A........................ 5 01/06/2020 CBI.................. (G) Well performance (G) Halogenated benzoic acid, ethyl ester.
monitor.
P-19-0109A........................ 5 01/09/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanolato-.kappa.O]](2-)]-;
cleaning (S) Copper, bis[2-(amino-.kappa.N)ethanolato-
formulation to .kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0109A........................ 6 01/14/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanol-.kappa.O]](2-)]-; (S)
cleaning Copper, bis[2-(amino-.kappa.N)ethanolato-
formulation to .kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0109A........................ 7 01/23/2020 Arch Chemicals, Inc.. (S) Chemical is used (S) Copper, [[2,2',2''-(nitrilo-
as a component of a .kappa.N)tris[ethanolato-.kappa.O]](2-)]-
cleaning ;(S) Copper, bis[2-(amino-
formulation to .kappa.N)ethanolato-.kappa.O]-;.
improve the
wettability of the
overall cleaning
solution on the
substrate.
P-19-0143A........................ 5 12/23/2019 Aditya Birla (S) A crosslinking (G) Aldehyde, polymer with mixed
Chemicals (USA), LLC. agent for use in alkanepolyamines, 2,2'-[1,4-
epoxy resin for alkanediylbis(oxyalkylene)] bis[oxirane], 2-
water-based coating (alkoxyalkyloxirane, 4,4'-(1-
for a variety of alkylidene)bis[phenol], 2,2'-[(1-
substrates and alkylidene)bis(4,1-
civil applications alkyleneoxyalkylene)]bis[oxirane] and 2-
in commercial and (aryloxyalkyl)oxirane, acetate (salt).
consumer usages.
[[Page 13896]]
P-19-0144A........................ 5 12/23/2019 Aditya Birla (S) A crosslinking (G) Alkanedioic Acid, compds. With
Chemicals (USA), LLC. agent in epoxy substituted arylalkylamine- arylalcohol
based self-leveling disubstituted alkane-the diglycidyl ether of
floor coatings. a arylalcohol disubstituted alkane -
epichlorohydrin-aldehyde-2,2'-[(1-
alkylidene)bis[4,1-aryleneoxy(alkyl-2,1-
alkanediyl)oxyalkylene]]bis[oxirane]-
alkanepolyamine polymer-1-[[2-[(2-
aminoalkyl)amino]alkyl]amino]-3-aryloxy-2-
alcohol reaction products.
P-19-0155A........................ 5 12/17/2019 Huntsman (S) Adjuvant for (S) Amides, from C8-18 and C18-unsatd.
International, LLC. agrochemical glycerides and diethylenetriamine,
formulations. ethoxylated.
P-19-0156A........................ 5 12/17/2019 Huntsman (S) Adjuvant for (S) Amides, from diethylenetriamine and palm
International, LLC. agrochemical kernel-oil, ethoxylated.
formulations.
P-19-0157A........................ 5 12/17/2019 Huntsman (S) Adjuvant in (S) Amides, from coconut oil and
International, LLC. agrochemical diethylenetriamine, ethoxylated.
formulations.
P-19-0158A........................ 6 01/06/2020 Ashland, Inc......... (G) Adhesive........ (G) Alkenoic acid polymer with 2-ethyl-2-
(hdroxymethyl)-1,3-alkyldiol, 1,1'-
methylenebis(4-isocyantocarbomonocycle) and
3-methyl-1,5-aklydiol.
P-19-0164A........................ 2 01/03/2020 Allnex USA, Inc...... (S) Site limited (G) Bis-alkoxy substituted alkane, polymer
intermediate for with aminoalkanol.
coating resin
manufacture.
P-19-0166A........................ 2 01/30/2020 Fujifilm Electronic (G) Photoacid (G) Triarylsulfonium alkylestersulfonate,.
Materials USA, Inc. generator (PAG).
P-19-0168A........................ 5 12/19/2019 CBI.................. (G) Well performance (G) Halogenated alkylbenzoic acid.
tracer.
P-19-0169A........................ 5 12/19/2019 CBI.................. (G) Well performance (G) Halogenated alkylbenzoic acid.
monitor.
P-20-0010A........................ 3 01/07/2020 CBI.................. (G) Polymerization (G) Carboxylic acid, reaction products with
auxiliary. metal hydroxide, inorganic dioxide and
metal.
P-20-0015......................... 4 01/13/2020 GE Healthcare........ (S) The polymer is (G) Zwitterionic polysulfone polymer;(G) N-
used in the alkyl heteromonocyclic diphenolamide,
manufacture of polymer with Bisphenol A, haloaryl-
hollow fiber substituted sulfone, compd. with cyclic
products. sulfonate ester, polyaryl alcohol
terminated.
P-20-0025A........................ 2 12/17/2019 Biosynthetic (S) Motor oil (S) Octadecanoic acid, 12-(acetoxy)-, 2-
Technologies. lubricant, ethylhexyl ester.
formulation #1
(prepared at a
processor which is
controlled by
others),(S) Motor
oil lubricant,
formulation #2
(prepared at a
processor which is
controlled by
others).
P-20-0025A........................ 3 01/07/2020 Biosynthetic (S) Motor oil (S) Octadecanoic acid, 12-(acetoxy)-, 2-
Technologies. lubricant, ethylhexyl ester.
formulation #1
(prepared at a
processor which is
controlled by
others),(S) Motor
oil lubricant,
formulation #2
(prepared at a
processor which is
controlled by
others).
P-20-0026A........................ 3 01/13/2020 GE Healthcare........ (S) The new monomer (G) N-alkyl heteromonocyclic diphenolamide.
is isolated and
used for subsequent
polymerization.
P-20-0027......................... 5 01/10/2020 H.B. Fuller Company.. (S) Industrial (G) Glycols, alpha, omega-, c2-6, polymers
Adhesives. with adipic acid, dodecanedioic acid,
hydracrylic acid polyester, isophthalic
acid, 1,1'-methylenebis[4-
isocyanatobenzene], neopentyl glycol and
terephthalic acid.
P-20-0028......................... 5 01/10/2020 H.B. Fuller Company.. (S) Industrial (G) glycols, alpha, omega-, c2-6, polymers
Adhesives. with adipic acid, aromatic polyester,
dodecanedioic acid, hydracrylic acid
polyester, isophthalic acid, 1,1'-
methylenebis[4-isocyanatobenzene], neopentyl
glycol and terephthalic acid.
P-20-0029A........................ 3 01/14/2020 Kuraray America, Inc. (G) Oil soluble (S) Octanal, 7(or 8)-formyl-.
additive.
P-20-0031......................... 3 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated substituted 1,3-
oxathiolane dioxide.
[[Page 13897]]
P-20-0032A........................ 2 01/15/2020 Engineered Bonded (S) Talathol PO3, (G) Polyethylene terephthalate polyol.
Structures and the material for
Composites. which this notice
is filed, is
intended to be used
as a copolymer in
the production of
urethane foam or
coating. This is
intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing
prefabricated
buildings.
P-20-0032A........................ 3 01/24/2020 Engineered Bonded (S) Talathol PO3, (G) Polyethylene terephthalate polyol.
Structures and the material for
Composites. which this notice
is filed, is
intended to be used
as a copolymer in
the production of
urethane foam or
coating. This is
intended to replace
lauan (also spelled
luan) paneling
which is used in
manufacturing
prefabricated
buildings.
P-20-0033......................... 2 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated vinyl haloalkane sulfonate
salt.
P-20-0034......................... 2 01/06/2020 CBI.................. (G) Intermediate.... (G) Perfluorinated vinyl haloalkane sulfonyl
halide.
P-20-0035A........................ 2 01/21/2020 CBI.................. (G) Colorant........ (G) Substituted aromatic, 3,3'-[[6-
[(substituted alkyl amino)]-1,3,5-triazine-
2,4-diyl]bis[imino[2-(substituted)-5-
[substituted alkoxy]-4,1-phenylene]-2,1-
diazenediyl]]bis[substituted, sodium salt].
P-20-0039......................... 2 01/12/2020 Miwon North America, (S) Resins for (G) Hexanedioic acid, polymer with
Inc. Industrial coating. alkyl(substituted-alkyl)-alkanediol and 1,3-
isobenzofurandione, 2-propenoate.
P-20-0040......................... 4 01/06/2020 CBI.................. (G) Additive for use (G) 2-Propenoic acid, cycloalkyl ester,.
in inks, coatings,
adhesives and
sealants.
P-20-0041......................... 2 01/07/2020 Kuraray America, Inc. (G) Chemical (S) 1,3-Benzenedicarboxylic acid, polymer
Intermediate for with 3-methyl-1,5-pentanediol.
Coatings.
P-20-0042......................... 2 01/08/2020 CBI.................. (G) Photoresist use (G) Sulfonium, trisaryl-, 7,7-dialkyl-2-
at customer. heteropolycyclic -1-alkanesulfonate (1:1).
P-20-0042A........................ 3 01/14/2020 CBI.................. (G) Photoacid (G) Sulfonium, trisaryl-, 7,7-dialkyl-2-
generator use at heteropolycyclic -1-alkanesulfonate (1:1).
customer.
P-20-0044......................... 1 01/23/2020 Angus Chemical (G) curing additive: (S) 1-Propanamine, 3-methoxy-N,N-dimethyl.
Company. automotive paint
(G) neutralization,
stability and
pigment dispersancy
in industrial latex
paints (G)
neutralization,
solubilization and
stability in
commercial
waterborne and
solvent borne
coatings and
varnishes used for
wood, metal,
compositites, and
other substrates
(G) solubilizer for
high acid value
styrene acrylic
polymers for use in
ink applications
(G) additive for
industrial
polyurethane
dispersions.
[[Page 13898]]
P-20-0046......................... 1 01/28/2020 CBI.................. (G) Catalyst........ (G) Reaction products of alkyl-terminated
alkylalumuminoxanes and {[(pentaalkylphenyl-
(pentaalkylphenyl)amino)alkyl]alkanediaminat
o{time} bis(aralkyl) transition metal
coordination compound.
P-20-0051......................... 1 01/31/2020 CBI.................. (S) Curing agent for (S) 1,8-Octanediamine, 4-(aminomethyl)-, N-
Industrial epoxy benzyl derivs.
coating systems.
SN-17-0011A....................... 3 01/16/2020 CBI.................. (G) Foam additive (G) Polyfluorohydrocarbon.
(G) Specialty gas
and transfer fluid.
--------------------------------------------------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided
with the submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 01/01/2020 to 01/31/2020
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type
Case No. Received date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-16-0022........................ 01/27/2020 01/27/2020 N.................. (G) Modified trichoderma
reesei.
P-10-0002........................ 12/16/2019 12/16/2019 N.................. (S) Soil organic matter,
alkaline extract,
potassium salt.
P-10-0438........................ 01/07/2020 07/19/2011 N.................. (G) 2-propenoic acid,
homopolymer, ester with
.alpha.-methyl-
polyether compd. with
aminoalcohol.
P-16-0310A....................... 12/18/2019 04/09/2018 Generic chemical (G) 12-hydroxystearic
name. acid, reaction products
with alkylene diamine
and alkanoic acid.
P-16-0314........................ 01/28/2020 01/23/2020 N.................. (S) Ethanone, 1-(5-
propyl-1,3-benzodioxol-
2-yl)-.
P-16-0509........................ 01/13/2020 12/17/2019 N.................. (G) Modified ethylene-
vinyl alcohol
copolymer.
P-16-0573........................ 01/09/2020 02/07/2018 N.................. (G) Rosin, tall oil,
reaction products with
polyalkylene-
polysubstituted-
terephthalic acid
polymer.
P-17-0321........................ 01/09/2020 01/09/2020 N.................. (S) 1,3,5-naphthalene
trisulfonic acid
trisodium salt.
P-17-0368........................ 01/06/2020 01/05/2020 N.................. (G) Vegetable oil,
polymer with
alkanedioic acid,
alkali lignin,
diethylene glycol- and
polyol-depolymd.
poly(ethylene
terephthalate) waste
plastics.
P-17-0398........................ 01/10/2020 11/07/2019 N.................. (S) Waste plastics,
pyrolyzed, depolymd.,
c11 to c33
branched,cyclic and
linear fraction.a
complex combination of
hydrocarbons obtained
from the fractional
condensation of
polyolefins and vinyl
polymers waste
plastics. it consists
predominately of c11 to
c33 branched, cyclic
and linear hydrocarbons
and boils in the range
of 350 degrees c to 450
degrees c(662 degrees f
to 842 degrees f).
P-17-0399........................ 01/10/2020 11/07/2019 N.................. (S) Waste plastics,
pyrolyzed, depolymd.,
c7 to c26-branched,
cyclic and linear
fraction. a complex
combination of
hydrocarbons obtained
from the fractional
condensation of
polyolefins and vinyl
polymers waste
plastics. it consists
of predominately c7 to
c26 branched, cyclic
and linear hydrocarbons
and boils in the range
of 0 degrees c to 350
degrees c (32 degrees f
to 662 degrees f).
P-17-0405........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trifluoro-, ethyl
ester.
P-17-0406........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-, ethyl
ester.
P-17-0407........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trifluoro-, ethyl
ester.
P-17-0408........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-,ethyl ester.
P-17-0409........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-,ethyl ester.
P-17-0410........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-,ethyl ester.
P-17-0411........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,4-
trichloro-,ethyl ester.
P-17-0412........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-,ethyl ester.
P-17-0414........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trilfuoro.
P-17-0415........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trifluoro-.
P-17-0416........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-.
P-17-0417........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-.
[[Page 13899]]
P-17-0418........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-.
P-17-0420........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-.
P-17-0421........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-.
P-17-0422........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-.
P-17-0423........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-, ethyl
ester.
P-17-0441A....................... 12/31/2019 12/31/2019 Withdrew CBI claim. (S) Benzoic acid, 2,4,6-
trifluoro-, sodium salt
(1:1).
P-17-0442........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trifluoro-, sodium salt
(1:1).
P-17-0443........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trifluoro-, sodium salt
(1:1).
P-17-0444........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,6-
trichloro-, sodium salt
(1:1).
P-17-0445........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,5-
trichloro-, sodium salt
(1:1).
P-17-0446........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,6-
trichloro-, sodium salt
(1:1).
P-17-0447........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,4,5-
trichloro-, sodium salt
(1:1).
P-17-0448........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 3,4,5-
trichloro-, sodium salt
(1:1).
P-17-0449........................ 12/31/2019 12/31/2019 N.................. (S) Benzoic acid, 2,3,4-
trichloro-, sodium salt
(1:1).
P-17-0450........................ 12/31/2019 12/31/2019 N.................. (S) 2,5-dichlorobenzoic
acid.
P-18-0018........................ 01/06/2020 12/11/2019 N.................. (G) Fluorinated
acrylate, polymer with
alkyloxirane
homopolymer monoether
with alkanediol mono(2-
methyl-2-propenoate),
tert-bu 2-
ethylhexaneperoxoate-
initiated.
P-18-0091........................ 01/06/2020 01/05/2020 N.................. (G) Vegetable oil,
polymers with
diethylene glycol- and
polyol- and
polyethylene glycol-
depolymd. poly(ethylene
terephthalate) waste
plastics and
arylcarboxylic acid
anhydride.
P-18-0101........................ 12/27/2019 12/06/2019 N.................. (G) Polyol esters.
P-18-0179........................ 01/20/2020 01/13/2020 N.................. (G) Phenolic resin,
alkali, polymer with
formaldehyde and
phenol, sodium salt.
P-18-0234........................ 01/08/2020 12/09/2019 N.................. (G) Alkenoic acid,
reaction products with
bis substituted alkane
and ether polyol,.
P-18-0285........................ 01/07/2020 12/27/2019 N.................. (S) Butanedioic acid, 2-
methylene-, polymer
with 2-methyl- 2-[(1-
oxo-2-propen-1-
yl)amino]-1-
propanesulfonic acid,
sodium zinc salt.
P-18-0392........................ 01/17/2020 01/04/2020 N.................. (S) 2-oxazolidinone, 3-
ethenyl-5-methyl-.
P-18-0401........................ 01/21/2020 12/26/2019 N.................. (S) Glycerides, c16-18
and ci8-unsatd. mono-
and di-, citrates.
P-18-0402........................ 12/20/2019 12/19/2019 N.................. (G) Phenol,
alkanediylbis(iminoalky
lene)bis-,
bis(polyisoalkylene)
derivs.
P-19-0034........................ 01/20/2020 01/07/2020 N.................. (G) Metal, bis(2,4-
pentanedionato-ko2,ko4)-
, (t-4)-,.
P-19-0097........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 5-
fluoro-2-methyl-, ethyl
ester.
P-19-0103........................ 01/09/2020 01/01/2020 N.................. (S) Benzoic acid, 3-
chloro-2-fluoro-, ethyl
ester.
P-19-0104........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 2-
chloro-3-methyl-, ethyl
ester.
P-19-0108........................ 12/18/2019 12/18/2019 N.................. (S) Benzoic acid, 2-
chloro-4-methyl-, ethyl
ester.
P-19-0118........................ 01/10/2020 12/13/2019 N.................. (G) Substituted
polylalkylenepoly,
reaction products with
alkene polymer.
P-19-0146........................ 12/18/2019 12/03/2019 N.................. (G) Modified dimethyl
sulfoxide.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 01/01/2020 to 01/31/2020
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-20-0055............................. 01/27/2020 Ames Test..................... (G) Imidazo[4,5-
d]imidazole-2,5(1h,3h)-
dione, tetrahydro-
substituted alkyl-.
[[Page 13900]]
P-16-0349............................. 01/20/2020 Inherent Biodegradability (G) Quaternary ammonium
(OECD Test Guideline 302B), salt of polyisobutene
Acute Invertebrate Toxicity succinic acid.
Freshwater Daphnids (OCSPP
Test Guideline 850.1010),
Fish Acute Toxicity (Rainbow
Trout) Study and Fish Acute
Toxicity (Sheepshead Minnow)
Study (OCSPP Test Guideline
850.1075), Fish Acute
Toxicity with Humic Acid
Rainbow Trout) (OCSPP Test
Guideline 850.1085) and Algae
Acute Toxicity Study (OCSPP
850.4500).
P-16-0462............................. 01/21/2020 Metals Analysis Report........ (G) Silane-treated
aluminosilicate.
P-17-0195............................. 01/15/2020 Combined Repeated Dose and (G) 1,3-propanediol,2-
Reproductive/Developmental methylene-,
Toxicity Test of [claimed substituted.
CBI] by Oral Administration
in Rats (OECD Test Guideline
422).
P-18-0293............................. 12/18/2019 In vitro Skin Irritation Test (S) Propanedioic acid, 2-
with Chemilian L3000 XP using methylene-, 1,3-dihexyl
a Human Skin Model (OECD 439) ester.
and In vitro Skin Irritation
Test with Chemilian H4000 XP
using a Human Skin Model
(OECD 439).
P-18-0293............................. 01/22/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
L3000 XP by Oral Gavage in methylene-, 1,3-dihexyl
Rat (Fixed Dose Method). ester.
P-18-0294............................. 01/24/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
H4000 XP by Oral Gavage in methylene-, 1,3-
Rat (Fixed Dose Method). dicyclohexyl ester.
P-18-0294............................. 01/15/2020 An Acute Study of Chemilian (S) Propanedioic acid, 2-
H4000 XP by Oral Gavage in methylene-, 1,3-
Rat (Fixed Dose Method). dicyclohexyl ester.
P-18-0351............................. 01/16/2020 Drum Emptying Study........... (G) Acrylic acid,
tricyclo alkyl ester.
P-19-0147............................. 12/20/2019 Algal Study Supplement........ (G) Alkoxylated butyl
alkyl ester.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 4, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-04891 Filed 3-9-20; 8:45 am]
BILLING CODE 6560-50-P
