Foreign-Trade Zone (FTZ) 176-Rockford, Illinois; Notification of Proposed Production Activity; UniCarriers Americas Corporation (Forklift Engines and Assemblies); Marengo, Illinois, 12497-12499 [2020-04269]
Download as PDF
lotter on DSKBCFDHB2PROD with NOTICES
Federal Register / Vol. 85, No. 42 / Tuesday, March 3, 2020 / Notices
initiate over wireless lines, and the
Commission will not refund any
incurred charges. Callers will incur no
charge for calls they initiate over landline connections to the toll-free
conference call-in number.
Persons with hearing impairments
may also follow the discussion by first
calling the Federal Relay Service at 1–
800–877–8339 and providing the
operator with the toll-free conference
call-in number: 800–353–6461 and
conference call ID number: 6813288.
Members of the public are invited to
make brief statements during the Public
Comment section of the meeting or
submit written comments. The written
comments must be received in the
regional office approximately 30 days
after the scheduled meeting. Written
comments may be mailed to the Eastern
Regional Office, U.S. Commission on
Civil Rights, 1331 Pennsylvania
Avenue, Suite 1150, Washington, DC
20425, or emailed to Corrine Sanders at
ero@usccr.gov. Persons who desire
additional information may phone the
Eastern Regional Office at (202) 376–
7533.
Records and documents discussed
during the meeting will be available for
public viewing as they become available
at: https://www.facadatabase.gov/
FACA/FACAPublicViewCommittee
Details?id=a10t0000001gzjZAAQ; click
the ‘‘Meeting Details’’ and ‘‘Documents’’
links. Records generated from this
meeting may also be inspected and
reproduced at the Eastern Regional
Office, as they become available, both
before and after the meeting. Persons
interested in the work of this advisory
committee are advised to go to the
Commission’s website, www.usccr.gov,
or to contact the Eastern Regional Office
at the above phone number, email or
street address.
Agenda: Tuesday, March 17, 2020
I. Rollcall
II. Welcome
III. Project Planning
—Discuss draft Committee report on
its civil rights project
IV. Other Business
V. Next Meetings
VI. Public Comments
VII. Adjourn
Dated: February 27, 2020.
David Mussatt,
Supervisory Chief, Regional Programs Unit.
[FR Doc. 2020–04329 Filed 3–2–20; 8:45 am]
BILLING CODE 6335–01–P
VerDate Sep<11>2014
17:19 Mar 02, 2020
Jkt 250001
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–10–2020]
Foreign-Trade Zone (FTZ) 176—
Rockford, Illinois; Notification of
Proposed Production Activity;
UniCarriers Americas Corporation
(Forklift Engines and Assemblies);
Marengo, Illinois
UniCarriers Americas Corporation
(UniCarriers) submitted a notification of
proposed production activity to the FTZ
Board for its facilities in Marengo,
Illinois. The notification conforming to
the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was
received on February 18, 2020.
UniCarriers already has authority
(originally approved as Nissan Forklift
Corporation North America) to produce
forklifts within FTZ 176. The current
request would add finished products
and foreign status materials/components
to the scope of authority. Pursuant to 15
CFR 400.14(b), FTZ activity would be
limited to the specific foreign-status
materials/components and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt UniCarriers from customs
duty payments on the foreign-status
materials/components used in export
production. On its domestic sales, for
the foreign-status materials/components
noted below and in the existing scope
of authority, UniCarriers would be able
to choose the duty rates during customs
entry procedures that apply to internal
combustion engines, mast assemblies,
and transmission assemblies for forklifts
(duty rate ranges from duty-free to
2.5%). UniCarriers would be able to
avoid duty on foreign-status
components which become scrap/waste.
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment.
The materials/components sourced
from abroad include: Various paints
(polyester-based; acrylic or vinyl
polymer-based); varnishes based on
acrylic or vinyl polymers; prepared
water pigments; adhesives; various
plastic components (tubes, pipes and
hoses (rigid; flexible; not reinforced
without fittings; reinforced); selfadhesive certification and operation
labels; lids, caps, plugs and plates;
bushings and spacers; buttons, clips and
ties; covers; seals, washers and O-rings;
insulators and protectors; handles and
knobs; mats and pads; shrouds and
panels; slippers); various bearings
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
12497
(plastic; ball; roller lift ball; sprocket;
wheel chain ball; needle roller;
cylindrical roller; side roller; main);
various gaskets (plastic; graphite or
carbon; copper; cylinder head;
combined metal and paper, metal and
rubber, metal and plastic); various
guards (plastic; canvas rain; rain;
overhead); various housings (plastic;
flywheel; thermostat; timing chain; oil
pump; drive axle; torque converter;
motor sensor; connector; meter); various
vulcanized rubber components (tubes,
pipes and hoses (not reinforced without
fittings; not reinforced with fittings);
endless transmission belts; transmission
belts; kits; water seals, insulators, Orings and washers; gaskets and gasket
repair kits; oil seals and oil seal repair
kits; seals and seal repair kits; bellows,
dampers and diaphragms; insulation;
shock absorbers; boots, clips and cups;
mats or cushions; mounts; valves,
bonnets and covers; caps, plugs,
grommets, rings and stoppers); various
rubber components (tubes, pipes and
hoses (with fittings reinforced with
metal; without fittings reinforced with
textile materials; without fittings
reinforced with material other than
metal or textiles; with fittings reinforced
with materials other than metal or
textiles); floor mats); various tires (new
pneumatic; solid or cushion); various
tubes (rubber inner; engine fluid drain;
engine water; engine injection; lift
cylinder; drive axle; exhaust; suction);
cellular rubber pads and seals; various
gaskets and packing (cork; coated paper
or paperboard); not printed paper or
paperboard labels; various manuals
(operational; service; printed); tempered
safety glass; various mirrors (rear view;
framed glass); various engine
components (insulation; cases and
plates; heat shields; nozzles and
holders); insulators; various assemblies
(insulation; lock; hinge; caster; engine
with drive plates or flywheels; air horn;
chain tensioner; crankshaft damper;
distributor support; fuel tube; injection
tube; injector holder; jet; liquefied
petroleum gas adapter; oil filler cap; oil
pan; throttle chamber; engine nozzle;
governor; cylinder head for hydraulic or
pneumatic engines and motors; cylinder
rod; fuel, grease, injection, water, oil,
gear, charging, hydraulic fluid, orbital
steering or roller pump; oil pump drive
spindle; turbo charger; main catalyst
converter; winch; radiator baffle; ball
screw; battery mounting; bracket; brake;
bumper; front lower forklift cab; catch;
control lever shift; control valve lever;
duct; floorboard; forklift panel; guard;
inching lever; inching shaft; pedal link;
load wheel; liquefied petroleum gas
tube; mast; lower, stopping, side,
E:\FR\FM\03MRN1.SGM
03MRN1
lotter on DSKBCFDHB2PROD with NOTICES
12498
Federal Register / Vol. 85, No. 42 / Tuesday, March 3, 2020 / Notices
locking and axle plate; hydraulic oil
pipe; pipe, tube and hose; power
steering tube; rod; side shift; tie rod
socket; steer axle; wheel; valve; relief
and safety valve; solenoid valve;
vaporizer; control valve; side roller
bearings; camshaft; crankshaft; flange;
drive unit; gear; torque converter;
flywheel; pulley; clutch; yoke; clutch
drum; final drive; idler shaft;
transmission case; armature; holder;
stator or rotor; charger; converter;
rectifier; magnet; battery; distributor;
ignition coil; glow plug timer; pilot;
lamp; lens; turn signal lamp; heater;
buzzer; flasher unit; horn; display;
printed circuit board; meter; control;
headlamp; LED lamp; camshaft sensor;
engine controller module; regulator;
sensor; battery cable; brush; thermostat
switch; oil gauge; electrical pressure
sensor; airflow meter; indicator; oxygen
sensor; hour meter; meter housing;
thermostat); various wires (zinc-coated
or plated; insulated copper); various
iron or steel components (fittings with
mechanical, push-on or flanged joints;
pipe or tube adapters, joints or unions;
pipe or tube connectors, nipples and
connector assemblies; threaded
adapters, connectors and connector
assemblies; stranded wire with fittings;
stranded wire or cable; roller chain;
chain; master chain links; leaf chain;
lifting chain; threaded self-tapping
screws; machine screws; screws or bolts;
threaded bolts or studs; U-bolts;
threaded nuts; threaded plugs; spring or
lock washers; washers; rivets; cotters;
splint pins or snap rings; dowel pins;
plug and pin assemblies; orifice plugs;
Woodruff keys; helical springs; springs;
beams and supports; links and bands;
adjuster bars; bushings; cable guides;
cables for caliper brakes; caps, clamps
and clevis pins; clips; consoles; hose
band assemblies; brake shoes, levers, tie
rods and pivot pins; retainer plates; rods
and rod assemblies); various iron, alloy
or nonalloy steel components (threaded
couplings or elbows; adapters,
connectors, nipples and connector
assemblies); various heaters (nonelectric air; water and immersion;
electric for forklift cab use); steel balls
for port plugging; various copper
components (washers; seals and plugs;
insulated cable); various aluminum
components (tubes and pipes; clips,
pins, seals and washers; connectors);
zinc clips and pins; lock cylinders and
keys; locks; ignition keys; hinges; swivel
casters; various iron, steel, aluminum or
zinc components (gas spring cylinders;
stay assemblies; brackets); various plates
(base metal; camshaft; fuel pump cover;
fuel receiver; brake backing; mounting,
retaining, baffle, cover and backing;
VerDate Sep<11>2014
17:19 Mar 02, 2020
Jkt 250001
lower, stopping, side, locking and axle;
battery, step, guide, tilt, chain, anchor
and lever; drive; contact); various
engines (spark ignition; diesel); various
plugs (ball and blind; taper; Welch; sill
body; vent; drain or oil; spark; glow and
glow sets); carburetors; various
components for use on spark-ignition
internal combustion piston engines
(assemblies (connecting rod; cylinder
block; cylinder head; valve rocker cover;
valve rocker shaft; water outlet); exhaust
manifolds; exhaust valves; fan and air
horn spacers; intake manifolds; intake
valves; piston pins, rings and sets; push
rods; vacuum connectors; water bypass
connectors; water pump connectors);
various covers (exhaust manifold;
engine front; engine upper; battery; air
pipe, fuse box, relay box, steering
column, tilt cylinder, radiator, control
level and step; seal; clutch housing;
transmission/gearbox components;
motor brush, front and bearing; sensor);
carburetor fuel bowl floats; various
spacers (fuel pump; crankshaft; fan;
bevel pinion; lift cylinder; forklift;
suction filter; main shaft; pinion;
spacers); various cases (gear; battery; air
cleaner; front cover; print board); main
air bleeders; various yokes (manifold;
steering linkage; yoke); oil pump
adapters; oil throwers; various retainers
(oil seal; valve spring; battery; forklift);
various levers (throttle; inching;
parking); various valve components
(collets, lifters and rocker arms; spring
seats; guides; hydraulic fluid;
oleohydraulic or pneumatic
transmission; valves; PVC; magnets);
various components for use on diesel
engines (assemblies (connecting rod;
cylinder block; cylinder head; valve
rocker cover; valve rocker shaft; water
outlet); exhaust manifolds; exhaust
valves; intake manifolds; intake valves
and valve guides; piston pins, rings and
sets; push rods; vacuum connectors;
water bypass connectors; water pump
connectors); various cylinder
components (liners; caps; slave
cylinders; supports); flywheel to torque
converter pilots; hydraulic linear acting
engines and motors; pistons; various
pumps (fuel, grease, injection, water, oil
or gear; charging, hydraulic fluid, orbital
steering or roller; vacuum); pump
couplings, impellers, rods and steel
balls; cooling fans; compressors; turbo
chargers; breathers and mufflers; fan
blades; various vacuum components
(pump mufflers; tanks; controls); air
conditioners and their various
components (motors and fans; valve
expansions; condensers); hydraulic
fluid and transmission oil filters and
filter elements of pleated paper; intake
air filters and air filter elements of
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
pleated paper for internal combustion
engines; oil strainers; weighing
machinery components; scales or
weighing machinery; fire extinguishers;
winches; various forklift components
(hydraulic jacks; adapters and adjusters;
base tilt gauges; bulkheads; mast
mounting caps; frames; inner mast
beams; lower finger bars; mast beams;
ribs; seals; shafts; steps; stiffeners;
stoppers; upper finger bars; keyboards);
various forklifts (battery powered; selfpropelled rider type; operator riding
electrical); accelerator, clutch and brake
pedals; axle shafts; axle weldments;
various shims (metal; lift cylinder; lift
roller; forklift); ball joints; fork, mast
and material handling adjusting bars
and guides; torsion and guide bars;
battery trays; battery rollers and
stoppers; bell cranks; body panels; bogie
wheel frames; bosses for joining or
mating; book cover, fuse and switch
boxes; bracket assembly carriages; brake
boosters, chambers, drums and shoes;
calipers; various collars (bolt and pin;
engine mount and exhaust mounting;
shaft and control level); control lever
knobs and bellows; control valve rods;
counterweight hooks; steel couplers;
various shrouds (air pipe, battery, fuse
box, relay box, steering column, tilt
cylinder, radiator, control level and
step; engine and fan); cross members;
dashboards; drag links; drag rods; drive
axle hubs; drive axle mounting brackets;
eccentric discs or wheels; parking brake
equalizers; fenders; front and rear
overhead guard pillars; spring, pin,
hose, tube and cable guides; left hand,
right hand and lock pin handles; various
holders (air duct, battery, lever, shrink
wrap, bushing, switch and lamp; air
guide, mast side and fork side; holders;
fuse); hood hinges and lock bases; hood
panels; hose pulley shafts; hub caps;
level, pressure and air balance pump
controllers; inching level bushings; jaw
sideshifts; various pins (pedal, link,
drawbar, guide, traction, bell crank and
king; pivot, locking, hinge, lifting link,
tie rod, side cover, trunnion, bell crank
and anchor); load backrests; mast rail
liners; various kits (mini steering wheel
rebuild; ignition; electronic ignition
pick up; diagnostic; seat cushion
assembly); radiator, control handle and
tiller arm pivot mounts; mufflers;
reinforcement patches; Pitman arms;
pressure lift bars; propeller shafts;
various protectors (head lamp and rear
lamp; chain hose, hose pulley and
control lever; voltage overload); pull/
push bars; pulley shafts; radiator
screens; radiators; relay brackets;
reservoir tanks; various wheel
components (rims; brackets; forks);
various rings (locking, hub, side and
E:\FR\FM\03MRN1.SGM
03MRN1
lotter on DSKBCFDHB2PROD with NOTICES
Federal Register / Vol. 85, No. 42 / Tuesday, March 3, 2020 / Notices
spacer; tolerance); roller guides; dust
screens; spindle knuckles; stabilizing
arms; steer axle hubs; steering columns;
steering wheels; hood latch and door
strikers; struts; axle and mast supports;
tail pipes; tapped mast rail boss;
steering connecting tie rods; tiller arms;
hydraulic accumulators; mast side
rollers; tapered roller bearings, cones
and cups; bearing balls and needles;
bearing cones and cups; camshafts;
crankshafts; metal bushings; connecting
rod, crankshaft and flange rod bearings;
sprockets; gears, pinions and gearing;
transmissions; flywheels; pulleys;
clutches; universal joints; control valve
packing; sleeves and sprockets;
mechanical seals; various motors
(electric under 18.65W; AD/DC; DC to
an output of 750W; DC of an output
from 750W to 75kW; AC multi-phase;
starter; wiper); armatures; spring
brushes; stators and rotors; inverter unit
drives; power supplies, inverters and
rectifiers; magnets; various sensors
(magnet input; crank angle; pressure;
sensors; speed; temperature; water
temperature; fuel; meter);
electromagnetic couplings, clutches and
brakes; lead-acid storage batteries;
starter generators; alternators and
generators; igniters; pilots; voltage and
voltage current regulators; voltage
advancers; condensers; distributor
contact sets; distributor caps and shafts;
rotors; lamps; rear drive lights; rotating
beacons; work lamps; windshield
wipers; wiper arms and blades; light
bulbs; lenses; television cameras;
monitors; combination meters and meter
panels; various resistors (pilot lamp;
fixed; variable); potentiometers;
rheostats; transistor cards; logic and
traction cards; printed circuit boards;
meters; various switches (isolating or
make-and-break; push button; knife;
rotary; snap-action; slide; limit;
electronic); lightning arresters, voltage
limiters and surge suppressors; various
connectors (sensor; electrical; battery or
charger); snap plug receptacles; male
and female bullet terminals; fuses;
contactors and relays for a voltage up to
60V; contactors and relays for a voltage
over 60V; motor starters; bus bars;
terminal boards; electrical panel
insulators; boards, panels, modules and
controllers; contact tips; contactor bases;
headlamps; lamps for a voltage of 100V
or lower; LED lamps; thyristors; LED
diodes; transistors; speed controls; drive
motor, pump motor and electrical power
cables; various wire harnesses (body;
engine subassembly; light); brushes;
thermometers; dipsticks; flow meters;
water gauges; oil gauge guides; tube
guides for measurement instruments;
revolution counters; hour meters;
VerDate Sep<11>2014
17:19 Mar 02, 2020
Jkt 250001
speedometers and tachometers;
upholstered metal frame seats; cloth seat
backs, cushions, frames and seating;
and, seat cushions (duty rate ranges
from duty-free to 9.0%). The request
indicates that certain new pneumatic
tires, lock washers, and tapered roller
bearings and parts are subject to
antidumping/countervailing duty (AD/
CVD) orders if imported from certain
countries. The FTZ Board’s regulations
(15 CFR 400.14(e)) require that
merchandise subject to AD/CVD orders,
or items which would be otherwise
subject to suspension of liquidation
under AD/CVD procedures if they
entered U.S. customs territory, be
admitted to the zone in privileged
foreign (PF) status (19 CFR 146.41). The
request also indicates that certain
materials/components are subject to
special duties under Section 232 of the
Trade Expansion Act of 1962 (Section
232) or Section 301 of the Trade Act of
1974 (Section 301), depending on the
country of origin. The applicable
Section 232 and Section 301 decisions
require subject merchandise to be
admitted to FTZs in PF status.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is April
13, 2020.
A copy of the notification will be
available for public inspection in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
Dated: February 25, 2020.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2020–04269 Filed 3–2–20; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–09–2020]
Foreign-Trade Zone (FTZ) 124—
Gramercy, Louisiana; Notification of
Proposed Production Activity; Frank’s
International, LLC (Line Pipe With
Tubular Joints); New Iberia and
Lafayette, Louisiana
Frank’s International, LLC submitted
a notification of proposed production
activity to the FTZ Board for its
facilities located in New Iberia and
Lafayette, Louisiana. The notification
conforming to the requirements of the
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
12499
regulations of the FTZ Board (15 CFR
400.22) was received on February 19,
2020.
The grantee of FTZ 124 has submitted
a separate application for FTZ
designation at the facilities of Frank’s
International, LLC. The facilities will be
used for production of API specification
line pipe with tubular joints. Pursuant
to 15 CFR 400.14(b), FTZ activity would
be limited to the specific foreign-status
materials/components and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt Frank’s International, LLC
from customs duty payments on the
foreign-status materials/components
used in export production. On its
domestic sales, for the foreign-status
materials/components noted below, the
company would be able to choose the
duty rates during customs entry
procedures that apply to API
specification 5L line pipe with welded
on pin and box connections (duty-free).
Frank’s International, LLC would be
able to avoid duty on foreign-status
components which become scrap/waste.
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment.
The components and materials
sourced from abroad include API
specification 5L line pipe with an outer
diameter greater than 16 inches but less
than or equal to 24 inches, API
specification 5L line pipe with an outer
diameter greater than 24 inches, API
specification 5L line pipe of alloy steel,
and welded on pin and box threaded
connections (duty-free). The request
indicates that certain materials/
components are subject to special duties
under Section 232 of the Trade
Expansion Act of 1962 (Section 232) or
Section 301 of the Trade Act of 1974
(Section 301), depending on the country
of origin. The applicable Section 232
and Section 301 decisions require
subject merchandise to be admitted to
FTZs in privileged foreign status (19
CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is April
13, 2020.
A copy of the notification will be
available for public inspection in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
E:\FR\FM\03MRN1.SGM
03MRN1
Agencies
[Federal Register Volume 85, Number 42 (Tuesday, March 3, 2020)]
[Notices]
[Pages 12497-12499]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-04269]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-10-2020]
Foreign-Trade Zone (FTZ) 176--Rockford, Illinois; Notification of
Proposed Production Activity; UniCarriers Americas Corporation
(Forklift Engines and Assemblies); Marengo, Illinois
UniCarriers Americas Corporation (UniCarriers) submitted a
notification of proposed production activity to the FTZ Board for its
facilities in Marengo, Illinois. The notification conforming to the
requirements of the regulations of the FTZ Board (15 CFR 400.22) was
received on February 18, 2020.
UniCarriers already has authority (originally approved as Nissan
Forklift Corporation North America) to produce forklifts within FTZ
176. The current request would add finished products and foreign status
materials/components to the scope of authority. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited to the specific foreign-status
materials/components and specific finished products described in the
submitted notification (as described below) and subsequently authorized
by the FTZ Board.
Production under FTZ procedures could exempt UniCarriers from
customs duty payments on the foreign-status materials/components used
in export production. On its domestic sales, for the foreign-status
materials/components noted below and in the existing scope of
authority, UniCarriers would be able to choose the duty rates during
customs entry procedures that apply to internal combustion engines,
mast assemblies, and transmission assemblies for forklifts (duty rate
ranges from duty-free to 2.5%). UniCarriers would be able to avoid duty
on foreign-status components which become scrap/waste. Customs duties
also could possibly be deferred or reduced on foreign-status production
equipment.
The materials/components sourced from abroad include: Various
paints (polyester-based; acrylic or vinyl polymer-based); varnishes
based on acrylic or vinyl polymers; prepared water pigments; adhesives;
various plastic components (tubes, pipes and hoses (rigid; flexible;
not reinforced without fittings; reinforced); self-adhesive
certification and operation labels; lids, caps, plugs and plates;
bushings and spacers; buttons, clips and ties; covers; seals, washers
and O-rings; insulators and protectors; handles and knobs; mats and
pads; shrouds and panels; slippers); various bearings (plastic; ball;
roller lift ball; sprocket; wheel chain ball; needle roller;
cylindrical roller; side roller; main); various gaskets (plastic;
graphite or carbon; copper; cylinder head; combined metal and paper,
metal and rubber, metal and plastic); various guards (plastic; canvas
rain; rain; overhead); various housings (plastic; flywheel; thermostat;
timing chain; oil pump; drive axle; torque converter; motor sensor;
connector; meter); various vulcanized rubber components (tubes, pipes
and hoses (not reinforced without fittings; not reinforced with
fittings); endless transmission belts; transmission belts; kits; water
seals, insulators, O-rings and washers; gaskets and gasket repair kits;
oil seals and oil seal repair kits; seals and seal repair kits;
bellows, dampers and diaphragms; insulation; shock absorbers; boots,
clips and cups; mats or cushions; mounts; valves, bonnets and covers;
caps, plugs, grommets, rings and stoppers); various rubber components
(tubes, pipes and hoses (with fittings reinforced with metal; without
fittings reinforced with textile materials; without fittings reinforced
with material other than metal or textiles; with fittings reinforced
with materials other than metal or textiles); floor mats); various
tires (new pneumatic; solid or cushion); various tubes (rubber inner;
engine fluid drain; engine water; engine injection; lift cylinder;
drive axle; exhaust; suction); cellular rubber pads and seals; various
gaskets and packing (cork; coated paper or paperboard); not printed
paper or paperboard labels; various manuals (operational; service;
printed); tempered safety glass; various mirrors (rear view; framed
glass); various engine components (insulation; cases and plates; heat
shields; nozzles and holders); insulators; various assemblies
(insulation; lock; hinge; caster; engine with drive plates or
flywheels; air horn; chain tensioner; crankshaft damper; distributor
support; fuel tube; injection tube; injector holder; jet; liquefied
petroleum gas adapter; oil filler cap; oil pan; throttle chamber;
engine nozzle; governor; cylinder head for hydraulic or pneumatic
engines and motors; cylinder rod; fuel, grease, injection, water, oil,
gear, charging, hydraulic fluid, orbital steering or roller pump; oil
pump drive spindle; turbo charger; main catalyst converter; winch;
radiator baffle; ball screw; battery mounting; bracket; brake; bumper;
front lower forklift cab; catch; control lever shift; control valve
lever; duct; floorboard; forklift panel; guard; inching lever; inching
shaft; pedal link; load wheel; liquefied petroleum gas tube; mast;
lower, stopping, side,
[[Page 12498]]
locking and axle plate; hydraulic oil pipe; pipe, tube and hose; power
steering tube; rod; side shift; tie rod socket; steer axle; wheel;
valve; relief and safety valve; solenoid valve; vaporizer; control
valve; side roller bearings; camshaft; crankshaft; flange; drive unit;
gear; torque converter; flywheel; pulley; clutch; yoke; clutch drum;
final drive; idler shaft; transmission case; armature; holder; stator
or rotor; charger; converter; rectifier; magnet; battery; distributor;
ignition coil; glow plug timer; pilot; lamp; lens; turn signal lamp;
heater; buzzer; flasher unit; horn; display; printed circuit board;
meter; control; headlamp; LED lamp; camshaft sensor; engine controller
module; regulator; sensor; battery cable; brush; thermostat switch; oil
gauge; electrical pressure sensor; airflow meter; indicator; oxygen
sensor; hour meter; meter housing; thermostat); various wires (zinc-
coated or plated; insulated copper); various iron or steel components
(fittings with mechanical, push-on or flanged joints; pipe or tube
adapters, joints or unions; pipe or tube connectors, nipples and
connector assemblies; threaded adapters, connectors and connector
assemblies; stranded wire with fittings; stranded wire or cable; roller
chain; chain; master chain links; leaf chain; lifting chain; threaded
self-tapping screws; machine screws; screws or bolts; threaded bolts or
studs; U-bolts; threaded nuts; threaded plugs; spring or lock washers;
washers; rivets; cotters; splint pins or snap rings; dowel pins; plug
and pin assemblies; orifice plugs; Woodruff keys; helical springs;
springs; beams and supports; links and bands; adjuster bars; bushings;
cable guides; cables for caliper brakes; caps, clamps and clevis pins;
clips; consoles; hose band assemblies; brake shoes, levers, tie rods
and pivot pins; retainer plates; rods and rod assemblies); various
iron, alloy or nonalloy steel components (threaded couplings or elbows;
adapters, connectors, nipples and connector assemblies); various
heaters (non-electric air; water and immersion; electric for forklift
cab use); steel balls for port plugging; various copper components
(washers; seals and plugs; insulated cable); various aluminum
components (tubes and pipes; clips, pins, seals and washers;
connectors); zinc clips and pins; lock cylinders and keys; locks;
ignition keys; hinges; swivel casters; various iron, steel, aluminum or
zinc components (gas spring cylinders; stay assemblies; brackets);
various plates (base metal; camshaft; fuel pump cover; fuel receiver;
brake backing; mounting, retaining, baffle, cover and backing; lower,
stopping, side, locking and axle; battery, step, guide, tilt, chain,
anchor and lever; drive; contact); various engines (spark ignition;
diesel); various plugs (ball and blind; taper; Welch; sill body; vent;
drain or oil; spark; glow and glow sets); carburetors; various
components for use on spark-ignition internal combustion piston engines
(assemblies (connecting rod; cylinder block; cylinder head; valve
rocker cover; valve rocker shaft; water outlet); exhaust manifolds;
exhaust valves; fan and air horn spacers; intake manifolds; intake
valves; piston pins, rings and sets; push rods; vacuum connectors;
water bypass connectors; water pump connectors); various covers
(exhaust manifold; engine front; engine upper; battery; air pipe, fuse
box, relay box, steering column, tilt cylinder, radiator, control level
and step; seal; clutch housing; transmission/gearbox components; motor
brush, front and bearing; sensor); carburetor fuel bowl floats; various
spacers (fuel pump; crankshaft; fan; bevel pinion; lift cylinder;
forklift; suction filter; main shaft; pinion; spacers); various cases
(gear; battery; air cleaner; front cover; print board); main air
bleeders; various yokes (manifold; steering linkage; yoke); oil pump
adapters; oil throwers; various retainers (oil seal; valve spring;
battery; forklift); various levers (throttle; inching; parking);
various valve components (collets, lifters and rocker arms; spring
seats; guides; hydraulic fluid; oleohydraulic or pneumatic
transmission; valves; PVC; magnets); various components for use on
diesel engines (assemblies (connecting rod; cylinder block; cylinder
head; valve rocker cover; valve rocker shaft; water outlet); exhaust
manifolds; exhaust valves; intake manifolds; intake valves and valve
guides; piston pins, rings and sets; push rods; vacuum connectors;
water bypass connectors; water pump connectors); various cylinder
components (liners; caps; slave cylinders; supports); flywheel to
torque converter pilots; hydraulic linear acting engines and motors;
pistons; various pumps (fuel, grease, injection, water, oil or gear;
charging, hydraulic fluid, orbital steering or roller; vacuum); pump
couplings, impellers, rods and steel balls; cooling fans; compressors;
turbo chargers; breathers and mufflers; fan blades; various vacuum
components (pump mufflers; tanks; controls); air conditioners and their
various components (motors and fans; valve expansions; condensers);
hydraulic fluid and transmission oil filters and filter elements of
pleated paper; intake air filters and air filter elements of pleated
paper for internal combustion engines; oil strainers; weighing
machinery components; scales or weighing machinery; fire extinguishers;
winches; various forklift components (hydraulic jacks; adapters and
adjusters; base tilt gauges; bulkheads; mast mounting caps; frames;
inner mast beams; lower finger bars; mast beams; ribs; seals; shafts;
steps; stiffeners; stoppers; upper finger bars; keyboards); various
forklifts (battery powered; self-propelled rider type; operator riding
electrical); accelerator, clutch and brake pedals; axle shafts; axle
weldments; various shims (metal; lift cylinder; lift roller; forklift);
ball joints; fork, mast and material handling adjusting bars and
guides; torsion and guide bars; battery trays; battery rollers and
stoppers; bell cranks; body panels; bogie wheel frames; bosses for
joining or mating; book cover, fuse and switch boxes; bracket assembly
carriages; brake boosters, chambers, drums and shoes; calipers; various
collars (bolt and pin; engine mount and exhaust mounting; shaft and
control level); control lever knobs and bellows; control valve rods;
counterweight hooks; steel couplers; various shrouds (air pipe,
battery, fuse box, relay box, steering column, tilt cylinder, radiator,
control level and step; engine and fan); cross members; dashboards;
drag links; drag rods; drive axle hubs; drive axle mounting brackets;
eccentric discs or wheels; parking brake equalizers; fenders; front and
rear overhead guard pillars; spring, pin, hose, tube and cable guides;
left hand, right hand and lock pin handles; various holders (air duct,
battery, lever, shrink wrap, bushing, switch and lamp; air guide, mast
side and fork side; holders; fuse); hood hinges and lock bases; hood
panels; hose pulley shafts; hub caps; level, pressure and air balance
pump controllers; inching level bushings; jaw sideshifts; various pins
(pedal, link, drawbar, guide, traction, bell crank and king; pivot,
locking, hinge, lifting link, tie rod, side cover, trunnion, bell crank
and anchor); load backrests; mast rail liners; various kits (mini
steering wheel rebuild; ignition; electronic ignition pick up;
diagnostic; seat cushion assembly); radiator, control handle and tiller
arm pivot mounts; mufflers; reinforcement patches; Pitman arms;
pressure lift bars; propeller shafts; various protectors (head lamp and
rear lamp; chain hose, hose pulley and control lever; voltage
overload); pull/push bars; pulley shafts; radiator screens; radiators;
relay brackets; reservoir tanks; various wheel components (rims;
brackets; forks); various rings (locking, hub, side and
[[Page 12499]]
spacer; tolerance); roller guides; dust screens; spindle knuckles;
stabilizing arms; steer axle hubs; steering columns; steering wheels;
hood latch and door strikers; struts; axle and mast supports; tail
pipes; tapped mast rail boss; steering connecting tie rods; tiller
arms; hydraulic accumulators; mast side rollers; tapered roller
bearings, cones and cups; bearing balls and needles; bearing cones and
cups; camshafts; crankshafts; metal bushings; connecting rod,
crankshaft and flange rod bearings; sprockets; gears, pinions and
gearing; transmissions; flywheels; pulleys; clutches; universal joints;
control valve packing; sleeves and sprockets; mechanical seals; various
motors (electric under 18.65W; AD/DC; DC to an output of 750W; DC of an
output from 750W to 75kW; AC multi-phase; starter; wiper); armatures;
spring brushes; stators and rotors; inverter unit drives; power
supplies, inverters and rectifiers; magnets; various sensors (magnet
input; crank angle; pressure; sensors; speed; temperature; water
temperature; fuel; meter); electromagnetic couplings, clutches and
brakes; lead-acid storage batteries; starter generators; alternators
and generators; igniters; pilots; voltage and voltage current
regulators; voltage advancers; condensers; distributor contact sets;
distributor caps and shafts; rotors; lamps; rear drive lights; rotating
beacons; work lamps; windshield wipers; wiper arms and blades; light
bulbs; lenses; television cameras; monitors; combination meters and
meter panels; various resistors (pilot lamp; fixed; variable);
potentiometers; rheostats; transistor cards; logic and traction cards;
printed circuit boards; meters; various switches (isolating or make-
and-break; push button; knife; rotary; snap-action; slide; limit;
electronic); lightning arresters, voltage limiters and surge
suppressors; various connectors (sensor; electrical; battery or
charger); snap plug receptacles; male and female bullet terminals;
fuses; contactors and relays for a voltage up to 60V; contactors and
relays for a voltage over 60V; motor starters; bus bars; terminal
boards; electrical panel insulators; boards, panels, modules and
controllers; contact tips; contactor bases; headlamps; lamps for a
voltage of 100V or lower; LED lamps; thyristors; LED diodes;
transistors; speed controls; drive motor, pump motor and electrical
power cables; various wire harnesses (body; engine subassembly; light);
brushes; thermometers; dipsticks; flow meters; water gauges; oil gauge
guides; tube guides for measurement instruments; revolution counters;
hour meters; speedometers and tachometers; upholstered metal frame
seats; cloth seat backs, cushions, frames and seating; and, seat
cushions (duty rate ranges from duty-free to 9.0%). The request
indicates that certain new pneumatic tires, lock washers, and tapered
roller bearings and parts are subject to antidumping/countervailing
duty (AD/CVD) orders if imported from certain countries. The FTZ
Board's regulations (15 CFR 400.14(e)) require that merchandise subject
to AD/CVD orders, or items which would be otherwise subject to
suspension of liquidation under AD/CVD procedures if they entered U.S.
customs territory, be admitted to the zone in privileged foreign (PF)
status (19 CFR 146.41). The request also indicates that certain
materials/components are subject to special duties under Section 232 of
the Trade Expansion Act of 1962 (Section 232) or Section 301 of the
Trade Act of 1974 (Section 301), depending on the country of origin.
The applicable Section 232 and Section 301 decisions require subject
merchandise to be admitted to FTZs in PF status.
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is April 13, 2020.
A copy of the notification will be available for public inspection
in the ``Reading Room'' section of the Board's website, which is
accessible via www.trade.gov/ftz.
For further information, contact Juanita Chen at
[email protected] or 202-482-1378.
Dated: February 25, 2020.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2020-04269 Filed 3-2-20; 8:45 am]
BILLING CODE 3510-DS-P