Certain New Chemicals; Receipt and Status Information for November 2019, 8859-8865 [2020-03146]
Download as PDF
<![CDATA[
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
Dated: December 19, 2019.
Gregory E. Sopkin,
Regional Administrator, Region 8.
[FR Doc. 2020–03155 Filed 2–14–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2019–0075; FRL–9992–85]
Certain New Chemicals; Receipt and
Status Information for November 2019
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 11/01/2019 to
11/30/2019.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
March 19, 2020.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2019–0075,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW Washington, DC 20460–0001.
lotter on DSKBCFDHB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For
technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
11/01/2019 to 11/30/2019. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the TSCA, 15 U.S.C. 2601 et
seq., a chemical substance may be either
an ‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
PO 00000
Frm 00055
Fmt 4703
Sfmt 4703
8859
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
E:\FR\FM\18FEN1.SGM
18FEN1
8860
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/comments.
html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 11/01/2019 TO 11/30/2019
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Biofuel producting Saccharomyces cerevisiae
modified, genetically stable.
(G) Biofuel producting Saccharomyces cerevisiae
modified, genetically stable.
(G) Biofuel-producing modified microorganism(s),
with chromosomally-borne modifications.
(G) Biofuel-producing modified microorganism(s),
with chromosomally-borne modifications.
(G) Biofuel-producing modified microorganism(s),
with chromosomally-borne modifications.
(G) Biofuel-producing modified microorganism(s),
with chromosomally-borne modifications.
(G) Polychloropropane.
J–19–0024A ......
2
9/10/2019
CBI ..............
(G) Ethanol production .....
J–19–0025A ......
2
9/10/2019
CBI ..............
(G) Ethanol production .....
J–19–0026A ......
2
11/13/2019
CBI ..............
(G) Production of biofuel ..
J–19–0026A ......
3
11/15/2019
CBI ..............
(G) Production of biofuel ..
J–19–0027A ......
2
11/13/2019
CBI ..............
(G) Production of biofuel ..
J–19–0027A ......
3
11/15/2019
CBI ..............
(G) Production of biofuel ..
P–16–0486A .....
4
11/1/2019
CBI ..............
P–17–0007A .....
P–17–0260A .....
6
3
11/15/2019
11/21/2019
(G) Site-limited intermediate in the production of a refrigerant precursor.
(S) Intermediate ................
(G) Resin modifier ............
P–18–0019A .....
3
10/29/2019
P–18–0029A .....
2
10/30/2019
CBI ..............
P–18–0031A .....
6
11/20/2019
CBI ..............
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
CBI ..............
Shin Etsu
Silicones
of America.
Cabot Cor(S) Dispersive pigment .....
poration.
PO 00000
(G) Industrial use in Oilfield.
(G) Ingredient for industrial
coating.
Frm 00056
Fmt 4703
Sfmt 4703
(G) dialkyl 7,10-dioxa, dithiahexadeca diene.
(G) Alkoxy silane modified butadiene-styrene copolymer.
(G) Substituted Benzene, 4-[2-[2-hydroxy-3-[[(3nitrophenyl)amino]carbonyl]-1naphthalenyl]diazenyl]-, sodium salt (1:1).
(G) Fatty acids and fatty acid unsatd., reaction products with ethyleneamines and maleic anhydride.
(G) Substituted dicarboxylic acid, polymer with various alkanediols.
E:\FR\FM\18FEN1.SGM
18FEN1
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
8861
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 11/01/2019 TO 11/30/2019—Continued
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
CBI ..............
(G) Coating component ....
Cabot Corporation.
Cabot Corporation.
(S) Chemical intermediate
Cabot Corporation.
Cabot Corporation.
(S) Chemical intermediate
(G)
Heteropolycyclic,
halo
substituted
alkyl
substituteddiaromatic
amino
substituted
carbomonocycle, halo substituted alkyl substituted
heteropolycyclic, tetraaromatic metalloid salt (1:1).
(G) 2,5-Furandione, polymer with ethenylbenzene, 4hydroxy-substituted butyl amide, sodium salts.
(G) 2,5-Furandione, polymer with ethenylbenzene, 4hydroxysubstituted
butyl
[3-[2-[1-[[(2methoxyphenyl)amino]carbonyl]-2oxopropyl]diazenyl]phenyl]substituted,
sodium
salts.
(G) Butanamide, 2-[2-[(substitutued phenyl)diazenyl]N-(2-methoxyphenyl)-3-oxo-.
(G) 2,5-Furandione, polymer with ethenylbenzene, 4hydroxy-substituted butyl amide, polymers with
epichlorohydrin and trimethylolpropane, sodium
salts.
(G) 2,5-Furandione, polymer with ethenylbenzene, 4hydroxy-substitutedbutyl
[3-[2-[1[[(substitutedphenyl)amino]carbonyl]-2oxopropyl]diazenyl]phenyl]methyl amide, polymers
with epichlorohydrin and trimthylolpropane, sodium
salts.
(S) 1,3-Benzenedicarboxylic acid, 5-sulfo-, calcium
salt (2:1).
P–18–0160A .....
4
11/11/2019
P–18–0165A .....
6
11/1/2019
P–18–0166A .....
6
11/1/2019
P–18–0167A .....
4
11/6/2019
P–18–0190A .....
5
11/6/2019
P–18–0191A .....
5
11/6/2019
Cabot Corporation.
(S) Pigment Dispersing
Aid.
P–18–0213A .....
3
11/8/2019
CBI ..............
P–18–0214A .....
4
11/21/2019
CBI ..............
(S) polyester or polyamide
modifer incorporated
into backbone of polymer.
(G) Curing agent ..............
P–18–0215A .....
4
11/21/2019
CBI ..............
(G) Curing agent ..............
P–18–0216A .....
4
11/21/2019
CBI ..............
(G) Curing agent ..............
P–18–0236A .....
3
11/14/2019
(G) Paint additive .............
P–18–0274A .....
7
11/5/2019
The Sherwin
Williams
Company.
CBI ..............
P–18–0275A .....
6
11/5/2019
CBI ..............
(S) Chemical intermediate
and (G) Additive.
(G) Polymer additive .........
P–18–0363A .....
3
10/31/2019
CBI ..............
(G) Adhesive ....................
P–18–0367 ........
2
11/11/2019
Afcona
Chemicals
USA Inc.
P–18–0376A .....
2
11/5/2019
P–18–0387A .....
4
11/11/2019
Sumitomo
Chemical
Advanced
Technologies
LLC.
CBI ..............
(S) Acid-modified
polyether used as a
wetting and dispersing
additive for pigments in
industrial paints and
coatings.
(S) Substance used to im- (G) Thiosulfuric acid, aminoalkyl ester.
prove physical properties in rubber products.
P–18–0388A .....
4
11/11/2019
CBI ..............
(G) Plastic additive ...........
P–18–0399A .....
7
11/18/2019
CBI ..............
P–18–0400A .....
7
11/18/2019
CBI ..............
(G) Open, non-dispersive
use additive for industrial use only.
(G) Open, non-dispersive
use, additive for textile
industry.
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
PO 00000
(S) Chemical Intermediate
(S) Pigment Dispersing
Aid.
(G) Plastic Additive ...........
Frm 00057
Fmt 4703
Sfmt 4703
(G) Polycyclic substituted alkane, polymer with
cyclicalkylamine, epoxide, and polycyclic epoxide
ether, reaction products with dialkylamine substituted alkyl amine.
(G) Polycyclic alkane, polymer with monocyclic
amine, polycyclic epoxide ether, reaction products
with dialkylamine alkyl amine.
(G) Polycyclic substituted alkane, polymer with epoxide, reaction products with cyclicalkylamine and
dialkylamine substituted alkyl amine.
(G) Metal, alkenoic acid-alkyl alkenoate-alkyl substituted alkenoate polymer carbopolycycle complexes.
(G) Heterocycle fluoroalkyl sulfonyl.
(G) Methanone phenylene fluoroalkyl sulfonyl
heterocycle.
(G) Phenol, polymer with formaldehyde, substituted
phenol, sodium salts.
(M) (G) Acid-modified polyether.
(G) Alkanal, reaction products with alkanediyl
bis[alkyl-tris(alkyl-heterocycle)-1,3,5-triazine-2,4,6triamine and hydrogen peroxide.
(G) 1,3,5-triazine-2,4,6-triamine, alkanediyl bis[alkyltris(alkyl-heterocycle)-, allyl derivs., oxidized, hydrogenated.
(G) Rosin adduct ester, polymer with polyols, compd.
with ethanolamine.
(G) Rosin adduct ester, polymer with polyols, potassium salt.
E:\FR\FM\18FEN1.SGM
18FEN1
8862
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 11/01/2019 TO 11/30/2019—Continued
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–19–0064A .....
5
10/30/2019
The Sherwin
Williams
Company.
(G) Polymeric film former
for coatings.
P–19–0077A .....
P–19–0143A .....
8
4
11/12/2019
10/29/2019
CBI ..............
Aditya Birla
Chemicals
(USA),
LLC.
P–19–0144A .....
4
10/29/2019
Aditya Birla
Chemicals
(USA),
LLC.
(G) Agricultural .................
(S) A crosslinking agent
for use in epoxy resin
for water-based coating
for a variety of substrates and civil applications in commercial and
consumer usages.
(S) A crosslinking agent in
epoxy based self-leveling floor coatings.
P–19–0145A .....
5
11/7/2019
P–19–0145A .....
6
11/14/2019
P–19–0153A .....
4
11/6/2019
P–19–0155A .....
4
10/30/2019
P–19–0156A .....
4
10/30/2019
P–19–0157A .....
4
10/30/2019
P–19–0158A .....
5
10/29/2019
ARC Products, Inc.
ARC Products, Inc.
Wego Chemical Group.
Huntsman
International,
LLC.
Huntsman
International,
LLC.
Huntsman
International,
LLC.
Ashland, Inc.
P–19–0165A .....
3
11/11/2019
P–19–0167A .....
3
10/31/2019
P–19–0167A .....
4
11/18/2019
P–19–0168A .....
4
11/1/2019
P–19–0169A .....
4
11/1/2019
P–19–0180A .....
5
11/1/2019
P–19–0181A .....
5
11/1/2019
P–19–0182A .....
5
11/1/2019
P–20–0001A .....
3
10/29/2019
P–20–0001A .....
4
10/31/2019
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
(S) Oil Field Drilling Fluid
Additive.
(S) Oil Field Drilling Fluid
Additive.
(S) Raw material in Flame
Retardant product.
(S) Adjuvant for
agrochemical formulations.
(G) Alkanedioic Acid, compds. With substituted
arylalkylamine- arylalcohol disubstituted alkane-the
diglycidyl ether of a arylalcohol disubstituted alkane
-epichlorohydrin-aldehyde-2,2′-[(1alkylidene)bis[4,1-aryleneoxy(alkyl-2,1alkanediyl)oxyalkylene]]bis[oxirane]alkanepolyamine
polymer-1-[[2-[(2aminoalkyl)amino]alkyl]amino]-3-aryloxy-2-alcohol
reaction products.
(G) Polyazaalkane with oxirane and methyloxirane,
haloalkane.
(G) Polyazaalkane with oxirane and methyloxirane,
haloalkane.
(G) Dibromoalkyl ether Tetrabromobisphenol A.
(S) Amides, from C8–18 and C18-unsatd. glycerides
and diethylenetriamine, ethoxylated.
(S) Adjuvant for
agrochemical formulations.
(S) Amides, from diethylenetriamine and palm kerneloil, ethoxylated.
(S) Adjuvant in
agrochemical formulations.
(S) Amides, from coconut oil and diethylenetriamine,
ethoxylated.
(G) Adhesive ....................
(G) Alkenoic acid polymer with 2-ethyl-2(hdroxymethyl)-1,3-alkyldiol, 1,1′-methylenebis(4isocyantocarbomonocycle)
and
3-methyl-1,5aklydiol.
(G) Tall oil pitch, fraction, sterol-low.
ARBORIS,
LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
CBI ..............
(G) Plasticizer in rubber
and Coating in minerals.
(S) Synthetic engine, gear
and lubricating oils and
greases.
(S) Synthetic engine, gear
and lubricating oils and
greases.
(G) Well performance tracer.
CBI .............. (G) Well performance
monitor.
CBI .............. (G) Well performance
monitor.
CBI .............. (G) Well performance
monitor.
CBI .............. (G) Well performance
monitor.
Santolubes
(S) Synthetic engine, gear
Manufac& lubricating oils &;
turing, LLC.
greases.
Santolubes
(S) Synthetic engine, gear
Manufac& lubricating oils &;
turing, LLC.
greases.
PO 00000
(G) 4,4′-methylenebis[2,6-dimethyl phenol] polymer
with 2-(chloromethyl)oxirane, 1,4-benzyl diol, 2methyl-2-propenoic acid, butyl 2-methyl 2propenoate, ethyl 2-methyl 2-propenoate, and ethyl
2-propenoate,
reaction
products
with
2(dimethylamino) ethanol.
(G) alkenylamide.
(G) Aldehyde, polymer with mixed alkanepolyamines,
2,2′-[1,4-alkanediylbis(oxyalkylene)] bis[oxirane], 2(alkoxyalkyloxirane, 4,4′-(1-alkylidene)bis[phenol],
2,2′-[(1-alkylidene)bis(4,1alkyleneoxyalkylene)]bis[oxirane]
and
2(aryloxyalkyl)oxirane, acetate (salt).
Frm 00058
Fmt 4703
Sfmt 4703
(S) Poly(oxy-1,4-butanediyl), alpha-hydro-omega-hydroxy-, hexanoate.
(S) Poly(oxy-1,4-butanediyl), alpha-hydro-omega-hydroxy-, hexanoate.
(G) Halogenated alkylbenzoic acid.
(G) Halogenated alkylbenzoic acid.
(G) Halogenated sodium benzoate.
(G) Halogenated sodium benzoate.
(G) Halogenated sodium benzoate.
(S) Poly(oxy-1,4-butanediyl), alpha-hydro-w-hydroxy-,
nonanoate.
(S) Poly(oxy-1,4-butanediyl), alpha-hydro-omega-hydroxy-, nonanoate.
E:\FR\FM\18FEN1.SGM
18FEN1
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
8863
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 11/01/2019 TO 11/30/2019—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
Santolubes
Manufacturing, LLC.
RMC Advanced
Technologies,
Inc..
CBI ..............
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(S) Synthetic engine, gear
& lubricating oils &
greases.
(G) Additive for plastics
and resins.
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with alpha-hydro-w-hydroxypoly(oxy-1,4butanediyl) and nonanoic acid.
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with alpha-hydro-omega-hydroxypoly(oxy1,4-butanediyl) and nonanoic acid.
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with alpha-hydro-omega-hydroxypoly(oxy1,4-butanediyl) and nonanoic acid.
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with hexanoic acid and alpha-hydroomega-hydroxypoly(oxy-1,4-butanediyl).
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with hexanoic acid and alpha-hydro-whydroxypoly(oxy-1,4-butanediyl).
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with hexanoic acid and alpha-hydroomega-hydroxypoly(oxy-1,4-butanediyl).
(S) Fatty Acids, C18-unsatd., dimers, hydrogenated,
polymers with hexanoic acid and alpha-hydroomega-hydroxypoly(oxy-1,4-butanediyl).
(G) modified graphene.
(G) The notified substance
will be used as a fragrance ingredient. It will
be blended (mixed) with
other fragrance ingredients to make fragrance
oils. The fragrance oils
containing the notified
substance will then be
incorporated into soaps,
detergents, cleaners, air
fresheners, candles and
other similar commercial
and consumer products.
(S) Motor oil lubricant, formulation #1 and formulation #2.
(G) Flame retardant for
textile.
(G) heteropolycycle, 2,6-dimethyl-3a-(1-methylethyl)-.
P–20–0002A .....
2
10/29/2019
P–20–0002A .....
4
10/29/2019
P–20–0002A .....
5
10/31/2019
P–20–0004A .....
2
10/29/2019
P–20–0004A .....
3
10/29/2019
P–20–0004A .....
4
10/30/2019
P–20–0004A .....
5
10/30/2019
P–20–0005A .....
3
11/11/2019
P–20–0023 ........
1
11/18/2019
P–20–0025 ........
1
11/19/2019
SN–18–0002A ...
4
11/4/2019
Biosynthetic
Technologies.
CBI ..............
(S) Octadecanoic acid, 12-(acetoxy)-, 2-ethylhexyl
ester.
(G)
Phosphoramidic
acid,
carbomonocyclic-,
diphenylester (accession number 261553).
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission
review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 11/01/2019 TO 11/30/2019
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Received date
Commencement
date
J–19–0017 ..............
P–17–0007A ...........
11/14/2019
11/15/2019
10/29/2019
9/20/2018
P–18–0172 ..............
P–18–0276 ..............
11/7/2019
11/5/2019
11/6/2019
10/7/2019
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
PO 00000
If amendment, type of
amendment
N ...................................................
Y ...................................................
CBI Substantiation provided ........
N ...................................................
N ...................................................
Frm 00059
Fmt 4703
Sfmt 4703
Chemical substance
(G) Genetically modified microorganism.
(G) Dialkyl 7,10-dioxa, dithiahexadeca diene.
(G) Calcium carbonate carboxylate.
(S) Benzenesulfonamide, N-[2-[[(phenylamino)carbonyl]amino]phenyl]-.
E:\FR\FM\18FEN1.SGM
18FEN1
8864
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
TABLE II—NOCS APPROVED * FROM 11/01/2019 TO 11/30/2019—Continued
Case No.
Commencement
date
Received date
If amendment, type of
amendment
Chemical substance
(G) Formaldehyde, polymer with 2-phenoxyalkanol
and alpha.-phenyl-.omega. hydroxypoly(oxy-1,2alkylnediyl),
dihydrogen
phosphate
2phenoxyalkyl hydrogen phosphate, alkaline salt.
(G) Polyalkylene glycol.
(S) Benzeneacetic acid, 2,3-difluoro-, sodium salt
(1:1).
(S) Benzeneacetic acid, 2-fluoro-, sodium salt
(1:1).
(S) Benzenepropanoic acid, 3-fluoro-, sodium salt
(1:1).
(S) Benzoic acid, 5-fluoro-2-methyl-, sodium salt
(1:1).
(S) Benzeneacetic acid, 2,3-difluoro-.
(S) Benzenepropanoic acid, 3-fluoro-.
(S)
2(3H)-Benzofuranone,
5,7-bis(1,1dimethylethyl)-3-[3,5-dimethyl-4-[[2,4,8,10tetrakis(1,1-dimethylethyl)-12-methyl12Hdibenzo[d,g][1,3,2]dioxaphosphocin-6yl]oxy]phenyl]-.
(S) Benzoic acid, 5-fluoro-2-methyl-, ethyl ester.
(S) Benzoic acid, 4-fluoro-2-methyl-, ethyl ester.
(S) Benzoic acid, 4-chloro-2-methyl-, ethyl ester.
(S) Benzoic acid, 5-chloro-2-methyl-, ethyl ester.
(S) Benzoic acid, 2-chloro-5-fluoro-, ethyl ester.
(S) Benzoic acid, 2-chloro-5-methyl-, ethyl ester.
(S) Benzoic acid, 3-fluoro-4-methyl-, ethyl ester.
(S) Benzoic acid, 2,4-dichloro-5-fluoro-, ethyl ester.
(G) Polycyclic amine, reaction products with
polyalkylalkene, polymers.
(G) Aminohydroxy salt.
P–18–0312 ..............
11/6/2019
10/23/2019
N ...................................................
P–18–0321 ..............
P–19–0086 ..............
11/6/2019
11/15/2019
10/23/2019
11/15/2019
N ...................................................
N ...................................................
P–19–0087 ..............
11/15/2019
11/15/2019
N ...................................................
P–19–0089 ..............
11/15/2019
11/15/2019
N ...................................................
P–19–0090 ..............
11/15/2019
11/15/2019
N ...................................................
P–19–0091 ..............
P–19–0092 ..............
P–19–0096 ..............
11/18/2019
11/18/2019
11/21/2019
11/18/2019
11/18/2019
11/4/2019
N ...................................................
N ...................................................
N ...................................................
P–19–0097
P–19–0100
P–19–0101
P–19–0102
P–19–0105
P–19–0106
P–19–0107
P–19–0110
P–19–0117
..............
..............
..............
..............
..............
..............
..............
..............
..............
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/4/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
11/18/2019
10/18/2019
N
N
N
N
N
N
N
N
N
P–19–0130 ..............
10/30/2019
10/23/2019
N ...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
...................................................
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 11/01/2019 TO 11/30/2019
Case No.
Received date
P–09–0644 ............
P–16–0543 ............
lotter on DSKBCFDHB2PROD with NOTICES
P–16–0593 ............
11/4/2019
11/4/2019
11/18/2019
11/4/2019
P–17–0195 ............
11/4/2019
11/20/2019
P–18–0027 ............
11/7/2019
VerDate Sep<11>2014
17:48 Feb 14, 2020
Type of test information
Chemical substance
Annual Analytical Report .........................
Exposure Monitoring Report ....................
(G) Substituted alkyl phosphate ester.
(G) Halogenophosphoric acid metal salt.
Particle Size Distribution Study and Surface Tension Study (OECD Test
Guideline 115).
Combined Repeated Dose and Reproductive/Development Test of [Claimed
CBI] by Oral Administration in Rats
(OECD Test Guideline 422), Clinical
signs table, Plasma concentration of
total T4 in rats table.
Evaluation of DNA Repair Inducing Ability of [CBI] in Male Rat Hepatocytes (in
vivo Rat Hepatocyte DNA-Repair
Assay) (OECD Test Guideline 486).
Substance Identifiers ...............................
(G) Aromatic Polyester Polyol.
Jkt 250001
PO 00000
Frm 00060
Fmt 4703
Sfmt 4703
(G) 1,3-Propanediol, 2-methylene- substituted.
(G) 2-Propenoic acid, 2-alkyl-, 2-(dialkylamino)alkyl ester,
polymer
with
alpha-(2-alkyl-1-oxo-2-alken-1-yl)-omegamethoxypoly(oxy-1,2-alkanediyl).
E:\FR\FM\18FEN1.SGM
18FEN1
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
8865
TABLE III—TEST INFORMATION RECEIVED FROM 11/01/2019 TO 11/30/2019—Continued
Case No.
Received date
P–18–0141 ............
11/18/2019
P–18–0293 ............
11/7/2019
P–18–0294 ............
11/7/2019
P–18–0350 ............
11/26/2019
P–19–0041 ............
11/26/2019
Submitted
Type of test information
Evaluation of the Ability of [CBI] to Induce Chromosome Aberration in Cultured Peripheral Human Lymphocytes
(OECD Test Guideline 473), Activated
Sludge Respiration Inhibition Test with
[CBI] (OECD Test Guideline 209),
DEREK Prediction on Skin Sensitization of [CBI],.
Combined Repeated Dose Toxicity Study
with the Reproduction/Developmental
Toxicity Screening Test (OECD Test
Guideline 422), Determination of
Physico-Chemical Properties of [CBI]
(OECD Test Guideline s101, 102, 103,
104, 109), In vitro Skin Corrosion Test
with using a Human Skin Model
(OECD Test Guideline 431), Ready
Biodegeradability (OECD Test Guideline 301B), Evaluation of the Eye Hazard Potential of using the Bovine Corneal Opacity and Permeability Test
(OECD Test Guideline 437), Acute
Oral Toxicity (OCED Test Guideline
423), In Vitro Skin Irritation (OECD
Test Guideline 439), Acute Inhalation
Toxicity (OECD Test Guideline 403).
Skin Sensitization Test (Local Lymph
Node Assay) (OECD Test Guideline
429).
Skin Sensitization Test (Local Lymph
Node Assay) (OECD Test Guideline
429).
Acute Oral Toxicity (OECD Test Guideline 401), Hydrolysis as a Function of
pH (OECD Test Guideline 111), Read
Across Justification.
Acute Toxicity to Fish Mitigated by
Humic Acid.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: January 29, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2020–03146 Filed 2–14–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
lotter on DSKBCFDHB2PROD with NOTICES
[EPA–HQ–OPPT–2019–0075; FRL–9992–86]
Certain New Chemicals; Receipt and
Status Information for December 2019
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
VerDate Sep<11>2014
17:48 Feb 14, 2020
Chemical substance
Jkt 250001
(G) Ethyl modified lactam.
(S) propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
(G) Aqueous methacrylamido modified polysiloxane.
(G) Alkyl diester, polymer with (dialkylamino alkyl) amine and
bis(halogenated alkyl) ether.
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 12/01/2019 to
12/31/2019.
DATES: Comments identified by the
specific case number provided in this
SUMMARY:
PO 00000
Frm 00061
Fmt 4703
Sfmt 4703
document must be received on or before
March 19, 2020.
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2019–0075,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
ADDRESSES:
E:\FR\FM\18FEN1.SGM
18FEN1
]]>Agencies
[Federal Register Volume 85, Number 32 (Tuesday, February 18, 2020)]
[Notices]
[Pages 8859-8865]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-03146]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2019-0075; FRL-9992-85]
Certain New Chemicals; Receipt and Status Information for
November 2019
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 11/01/
2019 to 11/30/2019.
DATES: Comments identified by the specific case number provided in this
document must be received on or before March 19, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim
Rahai, Information Management Division (7407M), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 11/01/2019 to 11/30/2019. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through
[[Page 8860]]
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 11/01/2019 to 11/30/2019
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0024A............. 2 9/10/2019 CBI............... (G) Ethanol (G) Biofuel producting
production. Saccharomyces
cerevisiae modified,
genetically stable.
J-19-0025A............. 2 9/10/2019 CBI............... (G) Ethanol (G) Biofuel producting
production. Saccharomyces
cerevisiae modified,
genetically stable.
J-19-0026A............. 2 11/13/2019 CBI............... (G) Production of (G) Biofuel-producing
biofuel. modified
microorganism(s), with
chromosomally-borne
modifications.
J-19-0026A............. 3 11/15/2019 CBI............... (G) Production of (G) Biofuel-producing
biofuel. modified
microorganism(s), with
chromosomally-borne
modifications.
J-19-0027A............. 2 11/13/2019 CBI............... (G) Production of (G) Biofuel-producing
biofuel. modified
microorganism(s), with
chromosomally-borne
modifications.
J-19-0027A............. 3 11/15/2019 CBI............... (G) Production of (G) Biofuel-producing
biofuel. modified
microorganism(s), with
chromosomally-borne
modifications.
P-16-0486A............. 4 11/1/2019 CBI............... (G) Site-limited (G) Polychloropropane.
intermediate in
the production of
a refrigerant
precursor.
P-17-0007A............. 6 11/15/2019 CBI............... (S) Intermediate.. (G) dialkyl 7,10-dioxa,
dithiahexadeca diene.
P-17-0260A............. 3 11/21/2019 Shin Etsu (G) Resin modifier (G) Alkoxy silane
Silicones of modified butadiene-
America. styrene copolymer.
P-18-0019A............. 3 10/29/2019 Cabot Corporation. (S) Dispersive (G) Substituted
pigment. Benzene, 4-[2-[2-
hydroxy-3-[[(3-
nitrophenyl)amino]carb
onyl]-1-
naphthalenyl]diazenyl]-
, sodium salt (1:1).
P-18-0029A............. 2 10/30/2019 CBI............... (G) Industrial use (G) Fatty acids and
in Oilfield. fatty acid unsatd.,
reaction products with
ethyleneamines and
maleic anhydride.
P-18-0031A............. 6 11/20/2019 CBI............... (G) Ingredient for (G) Substituted
industrial dicarboxylic acid,
coating. polymer with various
alkanediols.
[[Page 8861]]
P-18-0160A............. 4 11/11/2019 CBI............... (G) Coating (G) Heteropolycyclic,
component. halo substituted alkyl
substituted-
diaromatic amino
substituted
carbomonocycle, halo
substituted alkyl
substituted
heteropolycyclic,
tetraaromatic
metalloid salt (1:1).
P-18-0165A............. 6 11/1/2019 Cabot Corporation. (S) Chemical (G) 2,5-Furandione,
intermediate. polymer with
ethenylbenzene, 4-
hydroxy-substituted
butyl amide, sodium
salts.
P-18-0166A............. 6 11/1/2019 Cabot Corporation. (S) Chemical (G) 2,5-Furandione,
Intermediate. polymer with
ethenylbenzene, 4-
hydroxy- substituted
butyl [3-[2-[1-[[(2-
methoxyphenyl)amino]ca
rbonyl]-2-
oxopropyl]diazenyl]phe
nyl]substituted,
sodium salts.
P-18-0167A............. 4 11/6/2019 Cabot Corporation. (S) Chemical (G) Butanamide, 2-[2-
intermediate. [(substitutued
phenyl)diazenyl]-N-(2-
methoxyphenyl)-3-oxo-.
P-18-0190A............. 5 11/6/2019 Cabot Corporation. (S) Pigment (G) 2,5-Furandione,
Dispersing Aid. polymer with
ethenylbenzene, 4-
hydroxy-substituted
butyl amide, polymers
with epichlorohydrin
and
trimethylolpropane,
sodium salts.
P-18-0191A............. 5 11/6/2019 Cabot Corporation. (S) Pigment (G) 2,5-Furandione,
Dispersing Aid. polymer with
ethenylbenzene, 4-
hydroxy-
substitutedbutyl [3-[2-
[1-
[[(substitutedphenyl)a
mino]carbonyl]-2-
oxopropyl]diazenyl]phe
nyl]methyl amide,
polymers with
epichlorohydrin and
trimthylolpropane,
sodium salts.
P-18-0213A............. 3 11/8/2019 CBI............... (S) polyester or (S) 1,3-
polyamide modifer Benzenedicarboxylic
incorporated into acid, 5-sulfo-,
backbone of calcium salt (2:1).
polymer.
P-18-0214A............. 4 11/21/2019 CBI............... (G) Curing agent.. (G) Polycyclic
substituted alkane,
polymer with
cyclicalkylamine,
epoxide, and
polycyclic epoxide
ether, reaction
products with
dialkylamine
substituted alkyl
amine.
P-18-0215A............. 4 11/21/2019 CBI............... (G) Curing agent.. (G) Polycyclic alkane,
polymer with
monocyclic amine,
polycyclic epoxide
ether, reaction
products with
dialkylamine alkyl
amine.
P-18-0216A............. 4 11/21/2019 CBI............... (G) Curing agent.. (G) Polycyclic
substituted alkane,
polymer with epoxide,
reaction products with
cyclicalkylamine and
dialkylamine
substituted alkyl
amine.
P-18-0236A............. 3 11/14/2019 The Sherwin (G) Paint additive (G) Metal, alkenoic
Williams Company. acid-alkyl alkenoate-
alkyl substituted
alkenoate polymer
carbopolycycle
complexes.
P-18-0274A............. 7 11/5/2019 CBI............... (S) Chemical (G) Heterocycle
intermediate and fluoroalkyl sulfonyl.
(G) Additive.
P-18-0275A............. 6 11/5/2019 CBI............... (G) Polymer (G) Methanone phenylene
additive. fluoroalkyl sulfonyl
heterocycle.
P-18-0363A............. 3 10/31/2019 CBI............... (G) Adhesive...... (G) Phenol, polymer
with formaldehyde,
substituted phenol,
sodium salts.
P-18-0367.............. 2 11/11/2019 Afcona Chemicals (S) Acid-modified (M) (G) Acid-modified
USA Inc. polyether used as polyether.
a wetting and
dispersing
additive for
pigments in
industrial paints
and coatings.
P-18-0376A............. 2 11/5/2019 Sumitomo Chemical (S) Substance used (G) Thiosulfuric acid,
Advanced to improve aminoalkyl ester.
Technologies LLC. physical
properties in
rubber products.
P-18-0387A............. 4 11/11/2019 CBI............... (G) Plastic (G) Alkanal, reaction
Additive. products with
alkanediyl bis[alkyl-
tris(alkyl-
heterocycle)-1,3,5-
triazine-2,4,6-
triamine and hydrogen
peroxide.
P-18-0388A............. 4 11/11/2019 CBI............... (G) Plastic (G) 1,3,5-triazine-
additive. 2,4,6-triamine,
alkanediyl bis[alkyl-
tris(alkyl-
heterocycle)-, allyl
derivs., oxidized,
hydrogenated.
P-18-0399A............. 7 11/18/2019 CBI............... (G) Open, non- (G) Rosin adduct ester,
dispersive use polymer with polyols,
additive for compd. with
industrial use ethanolamine.
only.
P-18-0400A............. 7 11/18/2019 CBI............... (G) Open, non- (G) Rosin adduct ester,
dispersive use, polymer with polyols,
additive for potassium salt.
textile industry.
[[Page 8862]]
P-19-0064A............. 5 10/30/2019 The Sherwin (G) Polymeric film (G) 4,4'-
Williams Company. former for methylenebis[2,6-
coatings. dimethyl phenol]
polymer with 2-
(chloromethyl)oxirane,
1,4-benzyl diol, 2-
methyl-2-propenoic
acid, butyl 2-methyl 2-
propenoate, ethyl 2-
methyl 2-propenoate,
and ethyl 2-
propenoate, reaction
products with 2-
(dimethylamino)
ethanol.
P-19-0077A............. 8 11/12/2019 CBI............... (G) Agricultural.. (G) alkenylamide.
P-19-0143A............. 4 10/29/2019 Aditya Birla (S) A crosslinking (G) Aldehyde, polymer
Chemicals (USA), agent for use in with mixed
LLC. epoxy resin for alkanepolyamines, 2,2'-
water-based [1,4-
coating for a alkanediylbis(oxyalkyl
variety of ene)] bis[oxirane], 2-
substrates and (alkoxyalkyloxirane,
civil 4,4'-(1-
applications in alkylidene)bis[phenol]
commercial and , 2,2'-[(1-
consumer usages. alkylidene)bis(4,1-
alkyleneoxyalkylene)]b
is[oxirane] and 2-
(aryloxyalkyl)oxirane,
acetate (salt).
P-19-0144A............. 4 10/29/2019 Aditya Birla (S) A crosslinking (G) Alkanedioic Acid,
Chemicals (USA), agent in epoxy compds. With
LLC. based self- substituted
leveling floor arylalkylamine-
coatings. arylalcohol
disubstituted alkane-
the diglycidyl ether
of a arylalcohol
disubstituted alkane -
epichlorohydrin-
aldehyde-2,2'-[(1-
alkylidene)bis[4,1-
aryleneoxy(alkyl-2,1-
alkanediyl)oxyalkylene
]]bis[oxirane]-
alkanepolyamine
polymer-1-[[2-[(2-
aminoalkyl)amino]alkyl
]amino]-3-aryloxy-2-
alcohol reaction
products.
P-19-0145A............. 5 11/7/2019 ARC Products, Inc. (S) Oil Field (G) Polyazaalkane with
Drilling Fluid oxirane and
Additive. methyloxirane,
haloalkane.
P-19-0145A............. 6 11/14/2019 ARC Products, Inc. (S) Oil Field (G) Polyazaalkane with
Drilling Fluid oxirane and
Additive. methyloxirane,
haloalkane.
P-19-0153A............. 4 11/6/2019 Wego Chemical (S) Raw material (G) Dibromoalkyl ether
Group. in Flame Tetrabromobisphenol A.
Retardant product.
P-19-0155A............. 4 10/30/2019 Huntsman (S) Adjuvant for (S) Amides, from C8-18
International, agrochemical and C18-unsatd.
LLC. formulations. glycerides and
diethylenetriamine,
ethoxylated.
P-19-0156A............. 4 10/30/2019 Huntsman (S) Adjuvant for (S) Amides, from
International, agrochemical diethylenetriamine and
LLC. formulations. palm kernel-oil,
ethoxylated.
P-19-0157A............. 4 10/30/2019 Huntsman (S) Adjuvant in (S) Amides, from
International, agrochemical coconut oil and
LLC. formulations. diethylenetriamine,
ethoxylated.
P-19-0158A............. 5 10/29/2019 Ashland, Inc...... (G) Adhesive...... (G) Alkenoic acid
polymer with 2-ethyl-2-
(hdroxymethyl)-1,3-
alkyldiol, 1,1'-
methylenebis(4-
isocyantocarbomonocycl
e) and 3-methyl-1,5-
aklydiol.
P-19-0165A............. 3 11/11/2019 ARBORIS, LLC...... (G) Plasticizer in (G) Tall oil pitch,
rubber and fraction, sterol-low.
Coating in
minerals.
P-19-0167A............. 3 10/31/2019 Santolubes (S) Synthetic (S) Poly(oxy-1,4-
Manufacturing, engine, gear and butanediyl), alpha-
LLC. lubricating oils hydro-omega-hydroxy-,
and greases. hexanoate.
P-19-0167A............. 4 11/18/2019 Santolubes (S) Synthetic (S) Poly(oxy-1,4-
Manufacturing, engine, gear and butanediyl), alpha-
LLC. lubricating oils hydro-omega-hydroxy-,
and greases. hexanoate.
P-19-0168A............. 4 11/1/2019 CBI............... (G) Well (G) Halogenated
performance alkylbenzoic acid.
tracer.
P-19-0169A............. 4 11/1/2019 CBI............... (G) Well (G) Halogenated
performance alkylbenzoic acid.
monitor.
P-19-0180A............. 5 11/1/2019 CBI............... (G) Well (G) Halogenated sodium
performance benzoate.
monitor.
P-19-0181A............. 5 11/1/2019 CBI............... (G) Well (G) Halogenated sodium
performance benzoate.
monitor.
P-19-0182A............. 5 11/1/2019 CBI............... (G) Well (G) Halogenated sodium
performance benzoate.
monitor.
P-20-0001A............. 3 10/29/2019 Santolubes (S) Synthetic (S) Poly(oxy-1,4-
Manufacturing, engine, gear & butanediyl), alpha-
LLC. lubricating oils hydro-w-hydroxy-,
&; greases. nonanoate.
P-20-0001A............. 4 10/31/2019 Santolubes (S) Synthetic (S) Poly(oxy-1,4-
Manufacturing, engine, gear butanediyl), alpha-
LLC. & lubricating hydro-omega-hydroxy-,
oils &; greases. nonanoate.
[[Page 8863]]
P-20-0002A............. 2 10/29/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with alpha-hydro-w-
hydroxypoly(oxy-1,4-
butanediyl) and
nonanoic acid.
P-20-0002A............. 4 10/29/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with alpha-hydro-omega-
hydroxypoly(oxy-1,4-
butanediyl) and
nonanoic acid.
P-20-0002A............. 5 10/31/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with alpha-hydro-omega-
hydroxypoly(oxy-1,4-
butanediyl) and
nonanoic acid.
P-20-0004A............. 2 10/29/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with hexanoic acid and
alpha-hydro-omega-
hydroxypoly(oxy-1,4-
butanediyl).
P-20-0004A............. 3 10/29/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with hexanoic acid and
alpha-hydro-w-
hydroxypoly(oxy-1,4-
butanediyl).
P-20-0004A............. 4 10/30/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with hexanoic acid and
alpha-hydro-omega-
hydroxypoly(oxy-1,4-
butanediyl).
P-20-0004A............. 5 10/30/2019 Santolubes (S) Synthetic (S) Fatty Acids, C18-
Manufacturing, engine, gear & unsatd., dimers,
LLC. lubricating oils hydrogenated, polymers
& greases. with hexanoic acid and
alpha-hydro-omega-
hydroxypoly(oxy-1,4-
butanediyl).
P-20-0005A............. 3 11/11/2019 RMC Advanced (G) Additive for (G) modified graphene.
Technologies, plastics and
Inc.. resins.
P-20-0023.............. 1 11/18/2019 CBI............... (G) The notified (G) heteropolycycle,
substance will be 2,6-dimethyl-3a-(1-
used as a methylethyl)-.
fragrance
ingredient. It
will be blended
(mixed) with
other fragrance
ingredients to
make fragrance
oils. The
fragrance oils
containing the
notified
substance will
then be
incorporated into
soaps,
detergents,
cleaners, air
fresheners,
candles and other
similar
commercial and
consumer products.
P-20-0025.............. 1 11/19/2019 Biosynthetic (S) Motor oil (S) Octadecanoic acid,
Technologies. lubricant, 12-(acetoxy)-, 2-
formulation #1 ethylhexyl ester.
and formulation
#2.
SN-18-0002A............ 4 11/4/2019 CBI............... (G) Flame (G) Phosphoramidic
retardant for acid, carbomonocyclic-
textile. , diphenylester
(accession number
261553).
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90-day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 11/01/2019 to 11/30/2019
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0017............... 11/14/2019 10/29/2019 N.................... (G) Genetically modified
microorganism.
P-17-0007A.............. 11/15/2019 9/20/2018 Y.................... (G) Dialkyl 7,10-dioxa,
CBI Substantiation dithiahexadeca diene.
provided.
P-18-0172............... 11/7/2019 11/6/2019 N.................... (G) Calcium carbonate
carboxylate.
P-18-0276............... 11/5/2019 10/7/2019 N.................... (S) Benzenesulfonamide, N-[2-
[[(phenylamino)carbonyl]amino]
phenyl]-.
[[Page 8864]]
P-18-0312............... 11/6/2019 10/23/2019 N.................... (G) Formaldehyde, polymer with
2-phenoxyalkanol and alpha.-
phenyl-.omega. hydroxypoly(oxy-
1,2-alkylnediyl), dihydrogen
phosphate 2-phenoxyalkyl
hydrogen phosphate, alkaline
salt.
P-18-0321............... 11/6/2019 10/23/2019 N.................... (G) Polyalkylene glycol.
P-19-0086............... 11/15/2019 11/15/2019 N.................... (S) Benzeneacetic acid, 2,3-
difluoro-, sodium salt (1:1).
P-19-0087............... 11/15/2019 11/15/2019 N.................... (S) Benzeneacetic acid, 2-
fluoro-, sodium salt (1:1).
P-19-0089............... 11/15/2019 11/15/2019 N.................... (S) Benzenepropanoic acid, 3-
fluoro-, sodium salt (1:1).
P-19-0090............... 11/15/2019 11/15/2019 N.................... (S) Benzoic acid, 5-fluoro-2-
methyl-, sodium salt (1:1).
P-19-0091............... 11/18/2019 11/18/2019 N.................... (S) Benzeneacetic acid, 2,3-
difluoro-.
P-19-0092............... 11/18/2019 11/18/2019 N.................... (S) Benzenepropanoic acid, 3-
fluoro-.
P-19-0096............... 11/21/2019 11/4/2019 N.................... (S) 2(3H)-Benzofuranone, 5,7-
bis(1,1-dimethylethyl)-3-[3,5-
dimethyl-4-[[2,4,8,10-
tetrakis(1,1-dimethylethyl)-12-
methyl- 12H-
dibenzo[d,g][1,3,2]dioxaphosph
ocin-6-yl]oxy]phenyl]-.
P-19-0097............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 5-fluoro-2-
methyl-, ethyl ester.
P-19-0100............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 4-fluoro-2-
methyl-, ethyl ester.
P-19-0101............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 4-chloro-2-
methyl-, ethyl ester.
P-19-0102............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 5-chloro-2-
methyl-, ethyl ester.
P-19-0105............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 2-chloro-5-
fluoro-, ethyl ester.
P-19-0106............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 2-chloro-5-
methyl-, ethyl ester.
P-19-0107............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 3-fluoro-4-
methyl-, ethyl ester.
P-19-0110............... 11/18/2019 11/18/2019 N.................... (S) Benzoic acid, 2,4-dichloro-
5-fluoro-, ethyl ester.
P-19-0117............... 11/4/2019 10/18/2019 N.................... (G) Polycyclic amine, reaction
products with polyalkylalkene,
polymers.
P-19-0130............... 10/30/2019 10/23/2019 N.................... (G) Aminohydroxy salt.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 11/01/2019 to 11/30/2019
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-09-0644..................... 11/4/2019 Annual Analytical Report.. (G) Substituted alkyl phosphate
ester.
P-16-0543..................... 11/4/2019 Exposure Monitoring Report (G) Halogenophosphoric acid metal
11/18/2019 salt.
P-16-0593..................... 11/4/2019 Particle Size Distribution (G) Aromatic Polyester Polyol.
Study and Surface Tension
Study (OECD Test
Guideline 115).
P-17-0195..................... 11/4/2019 Combined Repeated Dose and (G) 1,3-Propanediol, 2-methylene-
11/20/2019 Reproductive/Development substituted.
Test of [Claimed CBI] by
Oral Administration in
Rats (OECD Test Guideline
422), Clinical signs
table, Plasma
concentration of total T4
in rats table.
Evaluation of DNA Repair
Inducing Ability of [CBI]
in Male Rat Hepatocytes
(in vivo Rat Hepatocyte
DNA-Repair Assay) (OECD
Test Guideline 486).
P-18-0027..................... 11/7/2019 Substance Identifiers..... (G) 2-Propenoic acid, 2-alkyl-, 2-
(dialkylamino)alkyl ester, polymer
with alpha-(2-alkyl-1-oxo-2-alken-1-
yl)-omega-methoxypoly(oxy-1,2-
alkanediyl).
[[Page 8865]]
P-18-0141..................... 11/18/2019 Evaluation of the Ability (G) Ethyl modified lactam.
of [CBI] to Induce
Chromosome Aberration in
Cultured Peripheral Human
Lymphocytes (OECD Test
Guideline 473), Activated
Sludge Respiration
Inhibition Test with
[CBI] (OECD Test
Guideline 209), DEREK
Prediction on Skin
Sensitization of [CBI],.
Combined Repeated Dose
Toxicity Study with the
Reproduction/
Developmental Toxicity
Screening Test (OECD Test
Guideline 422),
Determination of Physico-
Chemical Properties of
[CBI] (OECD Test
Guideline s101, 102, 103,
104, 109), In vitro Skin
Corrosion Test with using
a Human Skin Model (OECD
Test Guideline 431),
Ready Biodegeradability
(OECD Test Guideline
301B), Evaluation of the
Eye Hazard Potential of
using the Bovine Corneal
Opacity and Permeability
Test (OECD Test Guideline
437), Acute Oral Toxicity
(OCED Test Guideline
423), In Vitro Skin
Irritation (OECD Test
Guideline 439), Acute
Inhalation Toxicity (OECD
Test Guideline 403).
P-18-0293..................... 11/7/2019 Skin Sensitization Test (S) propanedioic acid, 2-methylene-,
(Local Lymph Node Assay) 1,3-dihexyl ester.
(OECD Test Guideline 429).
P-18-0294..................... 11/7/2019 Skin Sensitization Test (S) propanedioic acid, 2-methylene-,
(Local Lymph Node Assay) 1,3-dicyclohexyl ester.
(OECD Test Guideline 429).
P-18-0350..................... 11/26/2019 Acute Oral Toxicity (OECD (G) Aqueous methacrylamido modified
Test Guideline 401), polysiloxane.
Hydrolysis as a Function
of pH (OECD Test
Guideline 111), Read
Across Justification.
P-19-0041..................... 11/26/2019 Acute Toxicity to Fish (G) Alkyl diester, polymer with
Submitted Mitigated by Humic Acid. (dialkylamino alkyl) amine and
bis(halogenated alkyl) ether.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: January 29, 2020.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-03146 Filed 2-14-20; 8:45 am]
BILLING CODE 6560-50-P
