Certain New Chemicals; Receipt and Status Information for December 2019, 8865-8870 [2020-03105]
Download as PDF
<![CDATA[
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
8865
TABLE III—TEST INFORMATION RECEIVED FROM 11/01/2019 TO 11/30/2019—Continued
Case No.
Received date
P–18–0141 ............
11/18/2019
P–18–0293 ............
11/7/2019
P–18–0294 ............
11/7/2019
P–18–0350 ............
11/26/2019
P–19–0041 ............
11/26/2019
Submitted
Type of test information
Evaluation of the Ability of [CBI] to Induce Chromosome Aberration in Cultured Peripheral Human Lymphocytes
(OECD Test Guideline 473), Activated
Sludge Respiration Inhibition Test with
[CBI] (OECD Test Guideline 209),
DEREK Prediction on Skin Sensitization of [CBI],.
Combined Repeated Dose Toxicity Study
with the Reproduction/Developmental
Toxicity Screening Test (OECD Test
Guideline 422), Determination of
Physico-Chemical Properties of [CBI]
(OECD Test Guideline s101, 102, 103,
104, 109), In vitro Skin Corrosion Test
with using a Human Skin Model
(OECD Test Guideline 431), Ready
Biodegeradability (OECD Test Guideline 301B), Evaluation of the Eye Hazard Potential of using the Bovine Corneal Opacity and Permeability Test
(OECD Test Guideline 437), Acute
Oral Toxicity (OCED Test Guideline
423), In Vitro Skin Irritation (OECD
Test Guideline 439), Acute Inhalation
Toxicity (OECD Test Guideline 403).
Skin Sensitization Test (Local Lymph
Node Assay) (OECD Test Guideline
429).
Skin Sensitization Test (Local Lymph
Node Assay) (OECD Test Guideline
429).
Acute Oral Toxicity (OECD Test Guideline 401), Hydrolysis as a Function of
pH (OECD Test Guideline 111), Read
Across Justification.
Acute Toxicity to Fish Mitigated by
Humic Acid.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: January 29, 2020.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2020–03146 Filed 2–14–20; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
lotter on DSKBCFDHB2PROD with NOTICES
[EPA–HQ–OPPT–2019–0075; FRL–9992–86]
Certain New Chemicals; Receipt and
Status Information for December 2019
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
VerDate Sep<11>2014
17:48 Feb 14, 2020
Chemical substance
Jkt 250001
(G) Ethyl modified lactam.
(S) propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(S) propanedioic acid, 2-methylene-, 1,3-dicyclohexyl ester.
(G) Aqueous methacrylamido modified polysiloxane.
(G) Alkyl diester, polymer with (dialkylamino alkyl) amine and
bis(halogenated alkyl) ether.
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 12/01/2019 to
12/31/2019.
DATES: Comments identified by the
specific case number provided in this
SUMMARY:
PO 00000
Frm 00061
Fmt 4703
Sfmt 4703
document must be received on or before
March 19, 2020.
Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2019–0075,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
ADDRESSES:
E:\FR\FM\18FEN1.SGM
18FEN1
8866
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
12/01/2019 to 12/31/2019. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
lotter on DSKBCFDHB2PROD with NOTICES
B. What is the Agency’s authority for
taking this action?
Under the TSCA, 15 U.S.C. 2601 et
seq., a chemical substance may be either
an ‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to
allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
PO 00000
Frm 00062
Fmt 4703
Sfmt 4703
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
E:\FR\FM\18FEN1.SGM
18FEN1
8867
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 12/01/2019 TO 12/31/2019
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
J–20–0002 ..........
1
11/25/2019
CBI ...........................
(G) Production of a chemical .....................
P–16–0486A .......
5
11/22/2019
CBI ...........................
P–16–0539A .......
P–17–0239A .......
5
7
12/3/2019
12/11/2019
CBI ...........................
CBI ...........................
(G) Site-limited intermediate in the production of a refrigerant precursor.
(G) photolithography ..................................
(G) Adhesive for open non-descriptive use
P–17–0245A .......
P–17–0282A .......
7
11
12/12/2019
12/11/2019
CBI ...........................
Elantas PDG, Inc .....
P–17–0405A .......
P–17–0406A .......
P–17–0407 ..........
P–17–0408 ..........
P–17–0409 ..........
P–17–0410 ..........
P–17–0411 ..........
P–17–0412 ..........
P–17–0414 ..........
P–17–0415 ..........
P–17–0416 ..........
P–17–0417 ..........
P–17–0418A .......
P–17–0420A .......
P–17–0421A .......
P–17–0422A .......
P–17–0423 ..........
P–17–0441 ..........
P–17–0442 ..........
P–17–0443A .......
P–17–0444 ..........
P–17–0445A .......
P–17–0446A .......
P–17–0447 ..........
P–17–0448 ..........
P–17–0449 ..........
P–17–0450 ..........
P–18–0133A .......
8
7
6
5
6
5
5
5
5
6
6
6
6
7
6
6
5
5
5
6
4
7
6
6
5
5
5
3
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/6/2019
12/9/2019
12/9/2019
12/9/2019
12/11/2019
12/9/2019
12/9/2019
12/9/2019
12/9/2019
12/9/2019
12/9/2019
12/2/2019
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
CBI
P–18–0253A .......
3
11/22/2019
UBE America, Inc ....
P–18–0254A .......
3
11/22/2019
UBE America, Inc ....
P–18–0255A .......
3
11/22/2019
UBE America, Inc ....
(G) Adhesive for open, non-dispersive use
(S) This is a component of a mixture that
is used as an impregnating varnish for
stators and motors.
(G) Oil and gas well performance ..............
(G) Oil and gas well performance ..............
(G) Well performance .................................
(G) Well performance .................................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) Monitor well performance ....................
(G) component in hydraulic fracturing
fluids.
(G) Extrusion and Injection Molding Polymer.
(G) Extrusion and Injection Molding Polymer.
(G) Recreational equipment .......................
P–18–0267A .......
4
11/21/2019
CBI ...........................
(G) curing agent .........................................
P–18–0268A .......
4
11/21/2019
CBI ...........................
(G) curing agent .........................................
P–18–0269A .......
4
11/21/2019
CBI ...........................
(G) curing agent .........................................
P–18–0273A .......
2
12/11/2019
CBI ...........................
(G) Used in polymer manufacturing ...........
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
PO 00000
Frm 00063
Fmt 4703
Sfmt 4703
Microorganism with chromosomally-borne genetic
modifications for the production of a chemical.
(G) Polychloropropane.
(G) Organic sulfonate compound.
(G) Substituted carboxylic acid, polymer with 2,4diisocyanato-1-methylbenzene, hexanedioic acid,
alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2ethanediyl)], 1,1′-methylenebis[4isocyanatobenzene], 2,2′-oxybis[ethanol], 1,1′oxybis[2-propanol] and 1,2-propanediol.
(G) Unsaturated polyfluoro ester.
(S) Isocyanic acid, polymethylenepolyphenylene
ester, caprolactam- and phenol-blocked.
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
(G)
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid ethyl
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid.
halogenated benzoic acid ethyl
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
halogenated sodium benzoate.
Halogenated benzoic acid.
Polyol adduct of bisaldehyde.
ester.
ester.
ester.
ester.
ester.
ester.
ester.
ester.
ester.
(S) Dodecanoic acid, 12-amino-, homopolymer.
(G) Hexanedioic acid, polymer with 12aminododecanoic acid and a polyetheramine.
(S) Dodecanoic acid, 12-amino-, polymer with
hexahydro-2H-azepin-2-one.
(G) Branched alkanoic acid, epoxy ester, reaction
products with monocyclic dialkylamine and
polycyclic alcohol epoxy polymer.
(G) Branched alkanoic acid, epoxy ester, reaction
products with monocyclicdialkanamine and
polycyclic dialkanol ether polymer.
(G) Branched alkanoic acid, epoxy ester, reaction
products with monocyclicalkanamine, polycyclic
alcohol ether homopolymer, and polycyclic alcohol epoxy polymer.
(S) 1,4-Cyclohexanedicarboxylic acid, 1,4-bis(2ethylhexyl) ester.
E:\FR\FM\18FEN1.SGM
18FEN1
8868
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 12/01/2019 TO 12/31/2019—Continued
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(G) Company plans to produce ‘‘tires,
wastes, pyrolyzed, condensate oil fraction’’ (hereafter referred to as syn oil)
(CASRN: 1312024–02–4) from scrap
tire materials.
(S) Additive for automatic dishwashing detergent.
P–18–0287A .......
9
12/4/2019
CBI ...........................
P–18–0300A .......
3
12/4/2019
CBI ...........................
P–18–0345A .......
2
12/10/2019
P–18–0350A .......
2
12/4/2019
Evonik Corporation ..
P–18–0359A .......
3
12/10/2019
CBI ...........................
P–18–0367A .......
3
12/9/2019
CBI ...........................
P–19–0052A .......
5
12/11/2019
Evonik Corporation ..
P–19–0055A .......
3
12/9/2019
Rahn USA, Corp ......
P–19–0083A .......
2
12/3/2019
P–19–0135A .......
4
12/10/2019
KX Technologies,
LLC.
CBI ...........................
P–19–0146A .......
3
11/25/2019
CBI ...........................
P–19–0148A .......
2
12/13/2019
CBI ...........................
(G) Reagent used to introduce deuterium
to the substrate chemical.
(G) Fertilizer ingredient ..............................
P–19–0149A .......
2
12/13/2019
CBI ...........................
(G) Fertilizer ingredient ..............................
P–19–0150A .......
2
12/13/2019
CBI ...........................
(G) Fertilizer ingredient ..............................
P–19–0151A .......
2
12/13/2019
CBI ...........................
(G) Fertilizer ingredient ..............................
P–19–0152A .......
3
11/21/2019
UBE America, Inc ....
(G) Pre-polymer for polyurethane roll covers.
P–19–0159A .......
5
12/6/2019
CBI ...........................
(G) As Catalyst in Industrial sector ............
P–19–0159A .......
6
12/13/2019
CBI ...........................
(G) As Catalyst in Industrial sector ............
P–19–0174 ..........
3
12/11/2019
(G) Phosphorus antiwear compound .........
P–20–0009A .......
3
12/11/2019
International Lubricants, Inc.
Resinate Materials
Group, Inc.
P–20–0011A .......
4
12/2/2019
CBI ...........................
(G) Light stabilizer ......................................
P–20–0012A .......
5
12/12/2019
CBI ...........................
(G) Ink Additive ..........................................
P–20–0018 ..........
2
11/26/2019
CBI ...........................
(G) Component in candles .........................
P–20–0019 ..........
2
11/26/2019
CBI ...........................
(G) Component in candles .........................
P–20–0020 ..........
2
11/26/2019
CBI ...........................
(G) Component in candles .........................
P–20–0021 ..........
2
11/26/2019
CBI ...........................
(G) Component in candles .........................
P–20–0022 ..........
P–20–0024 ..........
2
3
12/9/2019
12/4/2019
CBI ...........................
CBI ...........................
(G) Fuel additive for combustion improver
(G) Dispersant polymer for coatings ..........
P–20–0026 ..........
2
12/20/2019
GE Healthcare .........
P–20–0029 ..........
2
12/18/2019
KURARAY America,
Inc.
(S) The new monomer is isolated and
used for subsequent polymerization.
(G) Oil soluble additive ..............................
VerDate Sep<11>2014
17:48 Feb 14, 2020
Chitec Technology
Co., Ltd.
Jkt 250001
PO 00000
(S) R-gen 990 is a liquid aminoketonebased photoinitator (PI) intended for use
as an ultraviolet (UV) curing agent in
highly pigmented inks, photo-resists,
and masks.
(S) Additive in water-borne UV-curable
coatings,(S) Filler & pigment treatment,(S) Glass fiber treatment.
(G) Molded or extruded items ....................
(S) Acid-modified polyether used as a wetting and dispersing additive for pigments
in industrial paints and coatings.
(S) Hard Surface Cleaner,(S) Component
of Laundry Detergent.
(S) The PMN is solely used as a photo
initiator within UV curable coating/ink
formulations.
(G) Activated carbon for water purification
(G) Lubricant Additive ................................
(S) Intermediate for use in the manufacture of polymers.
Frm 00064
Fmt 4703
Sfmt 4703
(G) Synthetic oil from tires.
(G) Heteromonocycle, alkenoic 1:1 salt, polymer
with alpha-(2-methyl-1-oxo-2-propen-1-y)lomegamethoxypoly(oxy-1,2-ethanediyl) and
methyl-alkenoic acid.
(S) 1-Butanone, 2-(dimethylamino)-1-[4-(2-ethyl-2methyl-3-oxazolidinyl)phenyl]-2-(phenylmethyl)-.
(G) Aqueous methacrylamido modified
polysiloxane.
(G) Methoxy Vinyl Ether- Vinylidene Fluoride polymer.
(G) Acid-modified polyether.
(S) Poly(oxy-1,2-ethanediyl), alpha-nonyl-omegahydroxy-, branched and linear.
(S) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-,
polymer with oxirane, 4(dimethylamino)benzoate.
(G) Charcoal, coconut shell, reaction products with
cyclic amine.
(G)Alkyl polyoxyethylene ethers,
carboxymethylated.
(G) Modified dimethyl sulfoxide.
(G) Iron, complexes with ethylenediamine-4hydroxycarbomonocycle hetero-acid-2-oxoacetic
acid reaction products, potassium salts.
(G) Iron, complexes with ethylenediamine-4hydroxycarbomonocycle hetero-acid potassium
salt (1:1)-potassium 2-oxoacetate (1:1) reaction
products, potassium salts.
(G) Iron, complexes with ethylenediamine-4hydroxycarbomonocycle hetero-acid-2-oxoacetic
acid reaction products, sodium salts.
(G) Iron, complexes with ethylenediamine-4hydroxycarbomonocycle hetero-acid sodium salt
(1:1)-sodium 2-oxoacetate (1:1) reaction products, sodium salts.
(G) alkaneic acid, dialkyl ester polymer with
alkanediol,
[[(isocyanatocarbomonocycle)alkyl)carbomonocycle)carbamate.
(G) Titanium (4+) hydroxy-alkylcarboxylate salt
complex.
(G) Titanium (4+) hydroxy-alkylcarboxylate salt
complex.
(G) Octadecanoic acid, (alkylphosphinyl), polyol
ester.
(G) Waste plastics, poly(ethylene terephthalate),
depolymd. with polyol, polymers with alkanedioic
acid and alkanoic acid.
(G) Tetraoxaspiro[5.5]alkyl-3,9-diylbis(alkyl-2,1-diyl)
bis(2-cyano-3-(3,4-dimethoxyphenyl)acrylate).
(G) Polyol, polymer with alkyl diisocyanate, alkyl
substituted heterocycle blocked.
(G) Fatty acid dimers, polymers with glycerol and
triglycerides.
(G) Fatty acid dimers, polymers with glycerol and
triglycerides.
(G) Fatty acid dimers, polymers with glycerol and
triglycerides.
(G) Fatty acid dimers, polymers with glycerol and
fatty acids.
(G) Polyalkoxycarbopolycycle hydroxy.
(G) Phenol-formaldehyde polymer with aminooxirane copolymer and nitrobenzoates.
(G) N-alkyl heteromonocyclic diphenolamide.
(S) Octanal, 7(or 8)-formyl-.
E:\FR\FM\18FEN1.SGM
18FEN1
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
8869
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 12/01/2019 TO 12/31/2019—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–20–0030 ..........
1
12/16/2019
CBI ...........................
P–20–0032 ..........
1
12/18/2019
Engineered Bonded
Structures and
Composites.
P–20–0035 ..........
1
12/19/2019
CBI ...........................
(S) Plasticizer for Plastisols, and Plasticizer in caulks and sealants.
(S) Talathol PO3, the material for which
this notice is filed, is intended to be
used as a copolymer in the production
of urethane foam or coating.
(G) Colorant ...............................................
P–20–0038 ..........
1
12/23/2019
Nissan Chemical
Houston Corporation.
(S) PMN substance will be used as resist
compound for semiconductor manufacture.
(G) Hexanedioic acid, alkyl ester.
(G) Polyethylene terephthalate polyol.
(G) Substituted aromatic, 3,3′-[[6-[(substituted alkyl
amino)]-1,3,5-triazine-2,4-diyl]bis[imino[2-(substituted)-5-[substituted alkoxy]-4,1-phenylene]2,1- diazenediyl]]bis[substituted, sodium salt].
(S) 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5tris[3-(2-oxiranyl)propyl]-.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 12/01/2019 TO 12/31/2019
Received
date
Case No.
Commencement date
If amendment, type
of amendment
P–16–0132A ....
12/12/2019
10/24/2019
Withdrew
CBI
claim.
N ..............
P–16–0388 ......
12/3/2019
11/25/2019
P–16–0470 ......
P–16–0572A ....
11/28/2019
12/10/2019
11/19/2019
9/19/2019
P–17–0362 ......
P–18–0125 ......
P–18–0155 ......
12/11/2019
11/26/2019
12/4/2019
11/12/2019
11/18/2019
11/20/2019
N ..............
Generic
chemical
name.
N ..............
N ..............
N ..............
P–18–0156 ......
12/4/2019
11/20/2019
N ..............
P–18–0295 ......
P–18–0300 ......
11/27/2019
12/4/2019
11/5/2019
11/20/2019
N ..............
N ..............
P–18–0321A ....
12/5/2019
10/23/2019
P–19–0065 ......
12/9/2019
11/15/2019
Withdrew
CBI
claim.
N ..............
P–19–0108 ......
P–19–0120 ......
12/3/2019
12/11/2019
11/18/2019
11/21/2019
N ..............
N ..............
Chemical substance
(S) Oxirane, 2-methyl-,
phosphates.
polymer
with
oxirane,
mono-c16-18-alkyl
ethers,
(S) Amines, n-(3-aminopropyl)-n-tallow alkyltrimethylenedi-, polymers with bisphenol
A and epichlorohydrin.
(S) 2,7-Nonadien-4-ol, 4,8-dimethyl-.
(G) Fatty acids, tall oil, reaction products with polyalkylene-polysubstituted-terephthalic acid polymer.
(G) Aliphatic phosphoric amide ester.
(S) Acetic acid, 2-oxo-, sodium salt (1:1).
(G) Crosslinked polymer of alkyl acrylamides, acrylate esters, and alkyl acrylamide
sulfonate salt.
(G) Crosslinked polymer of alkyl acrylamides, acrylate esters, and alkyl acrylamide
sulfonic acid.
(S) 1,3-Butanediol, (3R)-.
(G) Heteromonocycle, alkenoic 1:1 salt, polymer with .alpha.-(2-methyl-1-oxo-2propen-1-yl)-.omega.-methoxypoly(oxy-1,2-ethanediyl) and methyl-alkenoic acid.
(S) Poly(oxy-1,2-ethanediyl), alpha,alpha′-(1-methyl-1,2-ethanediyl)bis[omega-hydroxy-.
(S)
2lamda5,4lamda5,6lamda5—1,3,5,2,4,6
triazatriphosphorine,
2,2,4,4,6,6
-hexaphenoxy-.
(S) Benzoic acid, 2-chloro-4-methyl-, ethyl ester.
(G) Alkenoic acid, polymer with alkanediyl bis substituted alkylene bis
heteromonocycle,
substituted
carbomonocycle
and
(alkylalkenyl)
carbomonocycle, alkali metal salt.
lotter on DSKBCFDHB2PROD with NOTICES
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
PO 00000
Frm 00065
Fmt 4703
Sfmt 4703
type of test information submitted, and
chemical substance identity.
E:\FR\FM\18FEN1.SGM
18FEN1
8870
Federal Register / Vol. 85, No. 32 / Tuesday, February 18, 2020 / Notices
TABLE III—TEST INFORMATION RECEIVED FROM 12/01/2019 TO 12/31/2019
lotter on DSKBCFDHB2PROD with NOTICES
Case No.
Received date
Type of test information
Chemical substance
(G) Aromatic carboxylic acid, 2-[2-(6-amino-1-hydroxy3-sulfo-2-aromaticyl)diazenyl]-, reaction products
with 4-[[7-[2-(4-amino-2-alkoxyaromaticyl)diazenyl]8-hydroxy-6-sulfo-2-aromaticyl]amino]aromatic carboxylic
acid,
4-[2-(4aminoaromaticyl)diazenyl]aromaticsulfonic
acid,
metal
sulfate,
2,2′-(1,2-alkenediyl)bis[5nitroaromaticsulfonic acid] and sodium hydroxide.
(G) Fluoroalkyl methacrylate copolymer.
(G) Fluoroalkyl methacrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl methacrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl methacrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl methacrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Fluoroalkyl acrylate copolymer.
(G) Halogenophosphoric acid metal salt.
(S) 1-tetradecene homopolymer hydrogenated.
L–18–0168 ...
11/25/2019
Particle Size Distribution Study .....................................
P–06–0489
P–06–0494
P–06–0576
P–06–0586
P–07–0447
P–08–0222
P–09–0037
P–09–0511
P–10–0317
P–13–0646
P–13–0647
P–13–0648
P–13–0649
P–13–0678
P–13–0679
P–15–0154
P–16–0543
P–17–0005
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/14/2019
12/12/2019
12/09/2019
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
P–17–0343A
12/03/2019
P–17–0343A
12/03/2019
P–18–0293 ..
12/05/2019
P–18–0303 ..
12/09/2019
P–18–0365 ..
12/13/2019
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Annual Impurity Report .................................................
Exposure Monitoring Report .........................................
28-day (Subacute) Inhalation Toxicity Study (OECD
Test Guideline 412).
Ready Biodegradability of a Test Substance Based on
OECD Method 301A, Acute Toxicity Test Freshwater Invertebrate and Vertebrate, Acute Oral Toxicity Study in Rats, Dermal and Eye Irritation Study.
Ready Biodegradability of a Test Substance Based on
OECD Method 301A, Acute Toxicity Test Freshwater Invertebrate and Vertebrate, Acute Oral Toxicity Study in Rats, Dermal and Eye Irritation Study.
In vitro Skin Corrosion Test with Chemilian H4000 XP
using a Human Skin Model, In vitro Skin Irritation
Test with Chemilian L3000 XP using a Human Skin
Model.
Aquatic Toxicity Acute Base set (OECD Test Guideline 201, 202, 203).
Exposure Monitoring Report .........................................
P–18–0366 ..
12/13/2019
Exposure Monitoring Report .........................................
P–19–0038 ..
12/16/2019
P–19–0041 ..
11/25/2019
P–19–0147 ..
12/12/2019
Water solubility Study (OECD Test Guideline 105),
Partition Coefficient Study (OECD Test Guideline
107), Analytical Method Validation of Fatty acids,
coco, iso-Bu esters, Validation of the analytical
methods.
Algal Growth Inhibition Test, Acute Toxicity to Fish
Mitigated by Humic Acid.
Vapor Pressure by Isoteniscope (ASTM D2879) ..........
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
(G) Modified benzimidazole.
(G) Modified benzimidazole salt.
(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
(G) 2-propenoic acid, polymer with aliphatic cyclic epoxide.
(G) Starch, carboxymethyl ether, sodium salt, polymer
with polycarboxylic acid.
(G) Starch, carboxymethyl ether, sodium salt, polymer
with mixed polycarboxylic acids.
(S) Fatty acids, coco, iso-bu esters.
(G) Alkyl diester, polymer with (dialkylamino alkyl)
amine and bis(halogenated alkyl) ether.
(G) Alkoxylated butyl alkyl ester.
Dated: January 31, 2020.
Megan Carroll,
Acting Director, Information Management
Division, Office of Pollution Prevention and
Toxics.
FEDERAL COMMUNICATIONS
COMMISSION
[FR Doc. 2020–03105 Filed 2–14–20; 8:45 am]
Information Collections Being
Reviewed by the Federal
Communications Commission Under
Delegated Authority
BILLING CODE 6560–50–P
(Authority: 15 U.S.C. 2601 et seq.)
[OMB 3060–0185, OMB 3060–0627, OMB
3060–0837 and OMB 3060–0928; FRS 16485]
Federal Communications
Commission.
ACTION: Notice and request for
comments.
AGENCY:
VerDate Sep<11>2014
17:48 Feb 14, 2020
Jkt 250001
PO 00000
Frm 00066
Fmt 4703
Sfmt 4703
E:\FR\FM\18FEN1.SGM
18FEN1
]]>Agencies
[Federal Register Volume 85, Number 32 (Tuesday, February 18, 2020)]
[Notices]
[Pages 8865-8870]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-03105]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2019-0075; FRL-9992-86]
Certain New Chemicals; Receipt and Status Information for
December 2019
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 12/01/
2019 to 12/31/2019.
DATES: Comments identified by the specific case number provided in this
document must be received on or before March 19, 2020.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
[[Page 8866]]
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 12/01/2019 to 12/31/2019. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3). TSCA
section 5(h)(1) authorizes EPA to allow persons, upon application and
under appropriate restrictions, to manufacture or process a new
chemical substance, or a chemical substance subject to a significant
new use rule (SNUR) issued under TSCA section 5(a)(2), for ``test
marketing'' purposes, upon a showing that the manufacture, processing,
distribution in commerce, use, and disposal of the chemical will not
present an unreasonable risk of injury to health or the environment.
This is referred to as a test marketing exemption, or TME. For more
information about the requirements applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
[[Page 8867]]
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 12/01/2019 to 12/31/2019
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-20-0002........... 1 11/25/2019 CBI.............. (G) Production of a Microorganism with
chemical. chromosomally-borne
genetic modifications
for the production of a
chemical.
P-16-0486A.......... 5 11/22/2019 CBI.............. (G) Site-limited (G) Polychloropropane.
intermediate in the
production of a
refrigerant precursor.
P-16-0539A.......... 5 12/3/2019 CBI.............. (G) photolithography.. (G) Organic sulfonate
compound.
P-17-0239A.......... 7 12/11/2019 CBI.............. (G) Adhesive for open (G) Substituted
non-descriptive use. carboxylic acid, polymer
with 2,4-diisocyanato-1-
methylbenzene,
hexanedioic acid, alpha-
hydro-omega-
hydroxypoly[oxy(methyl-
1,2-ethanediyl)], 1,1'-
methylenebis[4-
isocyanatobenzene], 2,2'-
oxybis[ethanol], 1,1'-
oxybis[2-propanol] and
1,2-propanediol.
P-17-0245A.......... 7 12/12/2019 CBI.............. (G) Adhesive for open, (G) Unsaturated
non-dispersive use. polyfluoro ester.
P-17-0282A.......... 11 12/11/2019 Elantas PDG, Inc. (S) This is a (S) Isocyanic acid,
component of a polymethylenepolyphenyle
mixture that is used ne ester, caprolactam-
as an impregnating and phenol-blocked.
varnish for stators
and motors.
P-17-0405A.......... 8 12/6/2019 CBI.............. (G) Oil and gas well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0406A.......... 7 12/6/2019 CBI.............. (G) Oil and gas well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0407........... 6 12/6/2019 CBI.............. (G) Well performance.. (G) halogenated benzoic
acid ethyl ester.
P-17-0408........... 5 12/6/2019 CBI.............. (G) Well performance.. (G) halogenated benzoic
acid ethyl ester.
P-17-0409........... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0410........... 5 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0411........... 5 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0412........... 5 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0414........... 5 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0415........... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0416........... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0417........... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0418A.......... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0420A.......... 7 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0421A.......... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0422A.......... 6 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid.
P-17-0423........... 5 12/6/2019 CBI.............. (G) Monitor well (G) halogenated benzoic
performance. acid ethyl ester.
P-17-0441........... 5 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0442........... 5 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0443A.......... 6 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0444........... 4 12/11/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0445A.......... 7 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0446A.......... 6 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0447........... 6 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0448........... 5 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0449........... 5 12/9/2019 CBI.............. (G) Monitor well (G) halogenated sodium
performance. benzoate.
P-17-0450........... 5 12/9/2019 CBI.............. (G) Monitor well (G) Halogenated benzoic
performance. acid.
P-18-0133A.......... 3 12/2/2019 CBI.............. (G) component in (G) Polyol adduct of
hydraulic fracturing bisaldehyde.
fluids.
P-18-0253A.......... 3 11/22/2019 UBE America, Inc. (G) Extrusion and (S) Dodecanoic acid, 12-
Injection Molding amino-, homopolymer.
Polymer.
P-18-0254A.......... 3 11/22/2019 UBE America, Inc. (G) Extrusion and (G) Hexanedioic acid,
Injection Molding polymer with 12-
Polymer. aminododecanoic acid and
a polyetheramine.
P-18-0255A.......... 3 11/22/2019 UBE America, Inc. (G) Recreational (S) Dodecanoic acid, 12-
equipment. amino-, polymer with
hexahydro-2H-azepin-2-
one.
P-18-0267A.......... 4 11/21/2019 CBI.............. (G) curing agent...... (G) Branched alkanoic
acid, epoxy ester,
reaction products with
monocyclic dialkylamine
and polycyclic alcohol
epoxy polymer.
P-18-0268A.......... 4 11/21/2019 CBI.............. (G) curing agent...... (G) Branched alkanoic
acid, epoxy ester,
reaction products with
monocyclicdialkanamine
and polycyclic dialkanol
ether polymer.
P-18-0269A.......... 4 11/21/2019 CBI.............. (G) curing agent...... (G) Branched alkanoic
acid, epoxy ester,
reaction products with
monocyclicalkanamine,
polycyclic alcohol ether
homopolymer, and
polycyclic alcohol epoxy
polymer.
P-18-0273A.......... 2 12/11/2019 CBI.............. (G) Used in polymer (S) 1,4-
manufacturing. Cyclohexanedicarboxylic
acid, 1,4-bis(2-
ethylhexyl) ester.
[[Page 8868]]
P-18-0287A.......... 9 12/4/2019 CBI.............. (G) Company plans to (G) Synthetic oil from
produce ``tires, tires.
wastes, pyrolyzed,
condensate oil
fraction'' (hereafter
referred to as syn
oil) (CASRN: 1312024-
02-4) from scrap tire
materials.
P-18-0300A.......... 3 12/4/2019 CBI.............. (S) Additive for (G) Heteromonocycle,
automatic dishwashing alkenoic 1:1 salt,
detergent. polymer with alpha-(2-
methyl-1-oxo-2-propen-1-
y)l-omegamethoxypoly(oxy-
1,2-ethanediyl) and
methyl-alkenoic acid.
P-18-0345A.......... 2 12/10/2019 Chitec Technology (S) R-gen 990 is a (S) 1-Butanone, 2-
Co., Ltd. liquid aminoketone- (dimethylamino)-1-[4-(2-
based photoinitator ethyl-2-methyl-3-
(PI) intended for use oxazolidinyl)phenyl]-2-
as an ultraviolet (phenylmethyl)-.
(UV) curing agent in
highly pigmented
inks, photo-resists,
and masks.
P-18-0350A.......... 2 12/4/2019 Evonik (S) Additive in water- (G) Aqueous
Corporation. borne UV-curable methacrylamido modified
coatings,(S) Filler & polysiloxane.
pigment treatment,(S)
Glass fiber treatment.
P-18-0359A.......... 3 12/10/2019 CBI.............. (G) Molded or extruded (G) Methoxy Vinyl Ether-
items. Vinylidene Fluoride
polymer.
P-18-0367A.......... 3 12/9/2019 CBI.............. (S) Acid-modified (G) Acid-modified
polyether used as a polyether.
wetting and
dispersing additive
for pigments in
industrial paints and
coatings.
P-19-0052A.......... 5 12/11/2019 Evonik (S) Hard Surface (S) Poly(oxy-1,2-
Corporation. Cleaner,(S) Component ethanediyl), alpha-nonyl-
of Laundry Detergent. omega-hydroxy-, branched
and linear.
P-19-0055A.......... 3 12/9/2019 Rahn USA, Corp... (S) The PMN is solely (S) 1,3-propanediol, 2-
used as a photo ethyl-2-(hydroxymethyl)-
initiator within UV , polymer with oxirane,
curable coating/ink 4-
formulations. (dimethylamino)benzoate.
P-19-0083A.......... 2 12/3/2019 KX Technologies, (G) Activated carbon (G) Charcoal, coconut
LLC. for water shell, reaction products
purification. with cyclic amine.
P-19-0135A.......... 4 12/10/2019 CBI.............. (G) Lubricant Additive (G)Alkyl polyoxyethylene
ethers,
carboxymethylated.
P-19-0146A.......... 3 11/25/2019 CBI.............. (G) Reagent used to (G) Modified dimethyl
introduce deuterium sulfoxide.
to the substrate
chemical.
P-19-0148A.......... 2 12/13/2019 CBI.............. (G) Fertilizer (G) Iron, complexes with
ingredient. ethylenediamine-4-
hydroxycarbomonocycle
hetero-acid-2-oxoacetic
acid reaction products,
potassium salts.
P-19-0149A.......... 2 12/13/2019 CBI.............. (G) Fertilizer (G) Iron, complexes with
ingredient. ethylenediamine-4-
hydroxycarbomonocycle
hetero-acid potassium
salt (1:1)-potassium 2-
oxoacetate (1:1)
reaction products,
potassium salts.
P-19-0150A.......... 2 12/13/2019 CBI.............. (G) Fertilizer (G) Iron, complexes with
ingredient. ethylenediamine-4-
hydroxycarbomonocycle
hetero-acid-2-oxoacetic
acid reaction products,
sodium salts.
P-19-0151A.......... 2 12/13/2019 CBI.............. (G) Fertilizer (G) Iron, complexes with
ingredient. ethylenediamine-4-
hydroxycarbomonocycle
hetero-acid sodium salt
(1:1)-sodium 2-
oxoacetate (1:1)
reaction products,
sodium salts.
P-19-0152A.......... 3 11/21/2019 UBE America, Inc. (G) Pre-polymer for (G) alkaneic acid,
polyurethane roll dialkyl ester polymer
covers. with alkanediol,
[[(isocyanatocarbomonocy
cle)alkyl)carbomonocycle
)carbamate.
P-19-0159A.......... 5 12/6/2019 CBI.............. (G) As Catalyst in (G) Titanium (4+) hydroxy-
Industrial sector. alkylcarboxylate salt
complex.
P-19-0159A.......... 6 12/13/2019 CBI.............. (G) As Catalyst in (G) Titanium (4+) hydroxy-
Industrial sector. alkylcarboxylate salt
complex.
P-19-0174........... 3 12/11/2019 International (G) Phosphorus (G) Octadecanoic acid,
Lubricants, Inc. antiwear compound. (alkylphosphinyl),
polyol ester.
P-20-0009A.......... 3 12/11/2019 Resinate (S) Intermediate for (G) Waste plastics,
Materials Group, use in the poly(ethylene
Inc. manufacture of terephthalate),
polymers. depolymd. with polyol,
polymers with
alkanedioic acid and
alkanoic acid.
P-20-0011A.......... 4 12/2/2019 CBI.............. (G) Light stabilizer.. (G)
Tetraoxaspiro[5.5]alkyl-
3,9-diylbis(alkyl-2,1-
diyl) bis(2-cyano-3-(3,4-
dimethoxyphenyl)acrylate
).
P-20-0012A.......... 5 12/12/2019 CBI.............. (G) Ink Additive...... (G) Polyol, polymer with
alkyl diisocyanate,
alkyl substituted
heterocycle blocked.
P-20-0018........... 2 11/26/2019 CBI.............. (G) Component in (G) Fatty acid dimers,
candles. polymers with glycerol
and triglycerides.
P-20-0019........... 2 11/26/2019 CBI.............. (G) Component in (G) Fatty acid dimers,
candles. polymers with glycerol
and triglycerides.
P-20-0020........... 2 11/26/2019 CBI.............. (G) Component in (G) Fatty acid dimers,
candles. polymers with glycerol
and triglycerides.
P-20-0021........... 2 11/26/2019 CBI.............. (G) Component in (G) Fatty acid dimers,
candles. polymers with glycerol
and fatty acids.
P-20-0022........... 2 12/9/2019 CBI.............. (G) Fuel additive for (G)
combustion improver. Polyalkoxycarbopolycycle
hydroxy.
P-20-0024........... 3 12/4/2019 CBI.............. (G) Dispersant polymer (G) Phenol-formaldehyde
for coatings. polymer with amino-
oxirane copolymer and
nitrobenzoates.
P-20-0026........... 2 12/20/2019 GE Healthcare.... (S) The new monomer is (G) N-alkyl
isolated and used for heteromonocyclic
subsequent diphenolamide.
polymerization.
P-20-0029........... 2 12/18/2019 KURARAY America, (G) Oil soluble (S) Octanal, 7(or 8)-
Inc. additive. formyl-.
[[Page 8869]]
P-20-0030........... 1 12/16/2019 CBI.............. (S) Plasticizer for (G) Hexanedioic acid,
Plastisols, and alkyl ester.
Plasticizer in caulks
and sealants.
P-20-0032........... 1 12/18/2019 Engineered Bonded (S) Talathol PO3, the (G) Polyethylene
Structures and material for which terephthalate polyol.
Composites. this notice is filed,
is intended to be
used as a copolymer
in the production of
urethane foam or
coating.
P-20-0035........... 1 12/19/2019 CBI.............. (G) Colorant.......... (G) Substituted aromatic,
3,3'-[[6-[(substituted
alkyl amino)]-1,3,5-
triazine-2,4-
diyl]bis[imino[2-
(substituted)-5-
[substituted alkoxy]-4,1-
phenylene]-2,1-
diazenediyl]]bis[substit
uted, sodium salt].
P-20-0038........... 1 12/23/2019 Nissan Chemical (S) PMN substance will (S) 1,3,5-Triazine-
Houston be used as resist 2,4,6(1H,3H,5H)-trione,
Corporation. compound for 1,3,5-tris[3-(2-
semiconductor oxiranyl)propyl]-.
manufacture.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90-day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 12/01/2019 to 12/31/2019
----------------------------------------------------------------------------------------------------------------
Received Commencement If amendment, type
Case No. date date of amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0132A........... 12/12/2019 10/24/2019 Withdrew CBI claim (S) Oxirane, 2-methyl-, polymer with
oxirane, mono-c16-18-alkyl ethers,
phosphates.
P-16-0388............ 12/3/2019 11/25/2019 N................. (S) Amines, n-(3-aminopropyl)-n-tallow
alkyltrimethylenedi-, polymers with
bisphenol A and epichlorohydrin.
P-16-0470............ 11/28/2019 11/19/2019 N................. (S) 2,7-Nonadien-4-ol, 4,8-dimethyl-.
P-16-0572A........... 12/10/2019 9/19/2019 Generic chemical (G) Fatty acids, tall oil, reaction
name. products with polyalkylene-
polysubstituted-terephthalic acid
polymer.
P-17-0362............ 12/11/2019 11/12/2019 N................. (G) Aliphatic phosphoric amide ester.
P-18-0125............ 11/26/2019 11/18/2019 N................. (S) Acetic acid, 2-oxo-, sodium salt
(1:1).
P-18-0155............ 12/4/2019 11/20/2019 N................. (G) Crosslinked polymer of alkyl
acrylamides, acrylate esters, and alkyl
acrylamide sulfonate salt.
P-18-0156............ 12/4/2019 11/20/2019 N................. (G) Crosslinked polymer of alkyl
acrylamides, acrylate esters, and alkyl
acrylamide sulfonic acid.
P-18-0295............ 11/27/2019 11/5/2019 N................. (S) 1,3-Butanediol, (3R)-.
P-18-0300............ 12/4/2019 11/20/2019 N................. (G) Heteromonocycle, alkenoic 1:1 salt,
polymer with .alpha.-(2-methyl-1-oxo-2-
propen-1-yl)-.omega.-methoxypoly(oxy-1,2-
ethanediyl) and methyl-alkenoic acid.
P-18-0321A........... 12/5/2019 10/23/2019 Withdrew CBI claim (S) Poly(oxy-1,2-ethanediyl), alpha,alpha'-
(1-methyl-1,2-ethanediyl)bis[omega-
hydroxy-.
P-19-0065............ 12/9/2019 11/15/2019 N................. (S) 2lamda5,4lamda5,6lamda5--1,3,5,2,4,6
triazatriphosphorine, 2,2,4,4,6,6 -
hexaphenoxy-.
P-19-0108............ 12/3/2019 11/18/2019 N................. (S) Benzoic acid, 2-chloro-4-methyl-,
ethyl ester.
P-19-0120............ 12/11/2019 11/21/2019 N................. (G) Alkenoic acid, polymer with alkanediyl
bis substituted alkylene bis
heteromonocycle, substituted
carbomonocycle and (alkylalkenyl)
carbomonocycle, alkali metal salt.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
[[Page 8870]]
Table III--Test Information Received From 12/01/2019 to 12/31/2019
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
L-18-0168........................... 11/25/2019 Particle Size Distribution (G) Aromatic carboxylic
Study. acid, 2-[2-(6-amino-1-
hydroxy-3-sulfo-2-
aromaticyl)diazenyl]-,
reaction products with 4-
[[7-[2-(4-amino-2-
alkoxyaromaticyl)diazenyl]-
8-hydroxy-6-sulfo-2-
aromaticyl]amino]aromatic
carboxylic acid, 4-[2-(4-
aminoaromaticyl)diazenyl]ar
omaticsulfonic acid, metal
sulfate, 2,2'-(1,2-
alkenediyl)bis[5-
nitroaromaticsulfonic acid]
and sodium hydroxide.
P-06-0489........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl methacrylate
copolymer.
P-06-0494........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl methacrylate
copolymer.
P-06-0576........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-06-0586........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl methacrylate
copolymer.
P-07-0447........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-08-0222........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-09-0037........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl methacrylate
copolymer.
P-09-0511........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-10-0317........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-13-0646........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-13-0647........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-13-0648........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-13-0649........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-13-0678........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl methacrylate
copolymer.
P-13-0679........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-15-0154........................... 12/14/2019 Annual Impurity Report...... (G) Fluoroalkyl acrylate
copolymer.
P-16-0543........................... 12/12/2019 Exposure Monitoring Report.. (G) Halogenophosphoric acid
metal salt.
P-17-0005........................... 12/09/2019 28-day (Subacute) Inhalation (S) 1-tetradecene
Toxicity Study (OECD Test homopolymer hydrogenated.
Guideline 412).
P-17-0343A.......................... 12/03/2019 Ready Biodegradability of a (G) Modified benzimidazole.
Test Substance Based on
OECD Method 301A, Acute
Toxicity Test Freshwater
Invertebrate and
Vertebrate, Acute Oral
Toxicity Study in Rats,
Dermal and Eye Irritation
Study.
P-17-0343A.......................... 12/03/2019 Ready Biodegradability of a (G) Modified benzimidazole
Test Substance Based on salt.
OECD Method 301A, Acute
Toxicity Test Freshwater
Invertebrate and
Vertebrate, Acute Oral
Toxicity Study in Rats,
Dermal and Eye Irritation
Study.
P-18-0293........................... 12/05/2019 In vitro Skin Corrosion Test (S) Propanedioic acid, 2-
with Chemilian H4000 XP methylene-, 1,3-dihexyl
using a Human Skin Model, ester.
In vitro Skin Irritation
Test with Chemilian L3000
XP using a Human Skin Model.
P-18-0303........................... 12/09/2019 Aquatic Toxicity Acute Base (G) 2-propenoic acid,
set (OECD Test Guideline polymer with aliphatic
201, 202, 203). cyclic epoxide.
P-18-0365........................... 12/13/2019 Exposure Monitoring Report.. (G) Starch, carboxymethyl
ether, sodium salt, polymer
with polycarboxylic acid.
P-18-0366........................... 12/13/2019 Exposure Monitoring Report.. (G) Starch, carboxymethyl
ether, sodium salt, polymer
with mixed polycarboxylic
acids.
P-19-0038........................... 12/16/2019 Water solubility Study (OECD (S) Fatty acids, coco, iso-
Test Guideline 105), bu esters.
Partition Coefficient Study
(OECD Test Guideline 107),
Analytical Method
Validation of Fatty acids,
coco, iso-Bu esters,
Validation of the
analytical methods.
P-19-0041........................... 11/25/2019 Algal Growth Inhibition (G) Alkyl diester, polymer
Test, Acute Toxicity to with (dialkylamino alkyl)
Fish Mitigated by Humic amine and bis(halogenated
Acid. alkyl) ether.
P-19-0147........................... 12/12/2019 Vapor Pressure by (G) Alkoxylated butyl alkyl
Isoteniscope (ASTM D2879). ester.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
(Authority: 15 U.S.C. 2601 et seq.)
Dated: January 31, 2020.
Megan Carroll,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2020-03105 Filed 2-14-20; 8:45 am]
BILLING CODE 6560-50-P
