Airworthiness Directives; Airbus SAS Airplanes, 7863-7865 [2020-02852]

Download as PDF Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Rules and Regulations (2) For more information about this AD, contact Tom Rodriguez, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206– 231–3226; email tom.rodriguez@faa.gov. (n) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (3) The following service information was approved for IBR on March 18, 2020. (i) Chapter 5–40, Airworthiness Limitations, Revision 20, dated November 2018, of the Dassault Aviation Falcon 2000 Maintenance Manual. (ii) [Reserved] (4) The following service information was approved for IBR on November 2, 2018 (83 FR 48924, September 28, 2018). (i) Chapter 5–40, Airworthiness Limitations, DGT 113876, Revision 19, dated November 2017, of the Dassault Falcon 2000 Maintenance Manual. (ii) [Reserved] (5) For service information identified in this AD, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201–440–6700; internet https:// www.dassaultfalcon.com. (6) You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (7) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@nara.gov, or go to: https:// www.archives.gov/federal-register/cfr/ibrlocations.html. Issued on January 28, 2020. Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–02720 Filed 2–11–20; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 lotter on DSKBCFDHB2PROD with RULES [Docket No. FAA–2020–0093; Product Identifier 2020–NM–026–AD; Amendment 39–19837; AD 2020–03–12] RIN 2120–AA64 Airworthiness Directives; Airbus SAS Airplanes Federal Aviation Administration (FAA), DOT. AGENCY: VerDate Sep<11>2014 15:54 Feb 11, 2020 Jkt 250001 Final rule; request for comments. ACTION: The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350–941 and –1041 airplanes. This AD was prompted by two reports of abnormal operation of the components of the ENG START panel or ECP due to liquid spillage in the system, and the subsequent uncommanded engine inflight shutdown (IFSD) of one engine in each case. This AD requires revising the existing airplane flight manual (AFM) to define a liquidprohibited zone in the flight deck and provide procedures following liquid spillage on the center pedestal, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD becomes effective February 14, 2020. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of February 14, 2020. The FAA must receive comments on this AD by March 30, 2020. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For the material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 89990 1000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0093. SUMMARY: PO 00000 Frm 00011 Fmt 4700 Sfmt 4700 7863 Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0093; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for Docket Operations is listed above. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Kathleen Arrigotti, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3218; email Kathleen.Arrigotti@faa.gov. SUPPLEMENTARY INFORMATION: Discussion The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA Emergency AD 2020–0020–E, dated February 5, 2020, corrected February 6, 2020 (‘‘EASA AD 2020–0020–E’’) (also referred to as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to address an unsafe condition for all Airbus SAS Model A350–941 and –1041 airplanes. This AD was prompted by two reports of abnormal operation of the components of the ENG START panel or ECP due to liquid spillage in the system, and the subsequent uncommanded engine IFSD of one engine in each case. The FAA is issuing this AD to address the potential for dual-engine IFSD, possibly resulting in a forced landing with consequent damage to the airplane and injury to occupants. See the MCAI for additional background information. Related IBR Material Under 1 CFR Part 51 EASA AD 2020–0020–E describes procedures for revising the existing airplane flight manual (AFM) to define a liquid-prohibited zone in the flight deck and provide procedures following liquid spillage on the center pedestal. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. FAA’s Determination This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to a E:\FR\FM\12FER1.SGM 12FER1 7864 Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Rules and Regulations bilateral agreement with the State of Design Authority, the FAA has been notified of the unsafe condition described in the MCAI referenced above. The FAA is issuing this AD because the agency evaluated all pertinent information and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design. Requirements of This AD This AD requires accomplishing the actions specified in EASA AD 2020– 0020–E described previously, as incorporated by reference, except for any differences identified as exceptions in the regulatory text of this AD. Explanation of Required Compliance Information In the FAA’s ongoing efforts to improve the efficiency of the AD process, the FAA initially worked with Airbus and EASA to develop a process to use certain EASA ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has since coordinated with other manufacturers and civil aviation authorities (CAAs) to use this process. As a result, EASA AD 2020–0020–E is incorporated by reference in this final rule. This AD, therefore, requires compliance with EASA AD 2020–0020–E in its entirety, through that incorporation, except for any differences identified as exceptions in the regulatory text of this AD. Using common terms that are the same as the heading of a particular section in the EASA AD does not mean that operators need comply only with that section. For example, where the AD requirement refers to ‘‘all required actions and compliance times,’’ compliance with this AD requirement is not limited to the section titled ‘‘Required Action(s) and Compliance Time(s)’’ in the EASA AD. Service information specified in EASA AD 2020–0020–E that is required for compliance with EASA AD 2020– 0020–E is available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2020–0093. FAA’s Justification and Determination of the Effective Date An unsafe condition exists that requires the immediate adoption of this AD without providing an opportunity for public comments prior to adoption. The FAA has found that the risk to the flying public justifies waiving notice and comment prior to adoption of this rule because abnormal operation of the components of the ENG START panel or ECP due to liquid spillage in the system could result in dual-engine IFSD, possibly resulting in a forced landing with consequent damage to the airplane and injury to occupants. Therefore, the FAA finds good cause that notice and opportunity for prior public comment are impracticable. In addition, for the reasons stated above, the FAA finds that good cause exists for making this amendment effective in less than 30 days. Because the FAA has determined that it has good cause to adopt this rule without notice and comment, RFA analysis is not required. Comments Invited This AD is a final rule that involves requirements affecting flight safety, and the FAA did not precede it by notice and opportunity for public comment. The FAA invites you to send any written relevant data, views, or arguments about this AD. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2020–0093; Product Identifier 2020–NM–026–AD’’ at the beginning of your comments. The FAA specifically invites comments on the overall regulatory, economic, environmental, and energy aspects of this AD. The FAA will consider all comments received by the closing date and may amend this AD based on those comments. The FAA will post all comments received, without change, to https:// www.regulations.gov, including any personal information you provide. The FAA will also post a report summarizing each substantive verbal contact received about this AD. Interim Action The FAA considers this AD interim action. If final action is later identified, the FAA might consider further rulemaking then. Regulatory Flexibility Act (RFA) Costs of Compliance The requirements of the RFA do not apply when an agency finds good cause pursuant to 5 U.S.C. 553 to adopt a rule without prior notice and comment. The FAA estimates that this AD affects 13 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD: ESTIMATED COSTS FOR REQUIRED ACTIONS Labor cost Parts cost Cost per product Cost on U.S. operators 1 work-hour × $85 per hour = $85 .............................................................................................. $0 $85 $1,105 lotter on DSKBCFDHB2PROD with RULES Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing VerDate Sep<11>2014 15:54 Feb 11, 2020 Jkt 250001 regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings The FAA determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of PO 00000 Frm 00012 Fmt 4700 Sfmt 4700 power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, and (2) Will not affect intrastate aviation in Alaska. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. E:\FR\FM\12FER1.SGM 12FER1 Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Rules and Regulations using EASA AD 2020–0020–E, dated February 5, 2020. Adoption of the Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ 2020–03–12 Airbus SAS: Amendment 39– 19837; Docket No. FAA–2020–0093; Product Identifier 2020–NM–026–AD. (a) Effective Date This AD becomes effective February 14, 2020. (b) Affected ADs None. (c) Applicability This AD applies to all Airbus SAS Model A350–941 and –1041 airplanes, certificated in any category. (d) Subject Air Transport Association (ATA) of America Code 76, Engine controls. (e) Reason This AD was prompted by two reports of abnormal operation of the components of the ENG START panel or ECP due to liquid spillage in the system, and the subsequent uncommanded engine inflight shutdown (IFSD) of one engine in each case. The FAA is issuing this AD to address the potential for dual-engine IFSD, possibly resulting in a forced landing with consequent damage to the airplane and injury to occupants. (f) Compliance Comply with this AD within the compliance times specified, unless already done. lotter on DSKBCFDHB2PROD with RULES (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020–0020–E, dated February 5, 2020, corrected February 6, 2020 (‘‘EASA AD 2020–0020–E’’). (h) Exceptions to EASA AD 2020–0020–E (1) Where EASA AD 2020–0020–E refers to its effective date, this AD requires using the effective date of this AD. (2) The ‘‘Remarks’’ section of EASA AD 2020–0020–E does not apply to this AD. (i) Credit for Previous Actions This paragraph provides credit for actions required by this AD, if those actions were performed before the effective date of this AD VerDate Sep<11>2014 15:54 Feb 11, 2020 Jkt 250001 (j) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Section, Transport Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Section, send it to the attention of the person identified in paragraph (k) of this AD. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@ faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Section, Transport Standards Branch, FAA; or EASA; or Airbus SAS’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOAauthorized signature. (3) Required for Compliance (RC): For any service information referenced in EASA AD 2020–0020–E that contains RC procedures and tests: Except as required by paragraph (j)(2) of this AD, RC procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC. (k) Related Information For more information about this AD, contact Kathleen Arrigotti, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3218; email Kathleen.Arrigotti@ faa.gov. (l) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) European Union Aviation Safety Agency (EASA) AD 2020–0020–E, dated February 5, 2020, corrected February 6, 2020. (ii) [Reserved] (3) For information about EASA AD 2020– 0020–E, contact the EASA, Konrad- PO 00000 Frm 00013 Fmt 4700 Sfmt 4700 7865 Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 89990 6017; email ADs@ easa.europa.eu; Internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https:// ad.easa.europa.eu. (4) You may view this material at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2020–0093. (5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@ nara.gov, or go to https://www.archives.gov/ federal-register/cfr/ibr-locations.html. Issued on February 7, 2020. Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–02852 Filed 2–10–20; 11:15 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2019–0670; Product Identifier 2019–NM–104–AD; Amendment 39–19830; AD 2020–02–16] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Final rule. AGENCY: The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737–200, –200C, –300, –400, and –500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the lower skin of the fuselage skin lap splices along the lower fastener row of a certain stringer lap splice on certain body station skin panels may be subject to widespread fatigue damage (WFD). This AD requires inspections of the lower skin of the fuselage skin lap splices along the lower fastener row of a certain stringer lap splice on certain body station skin panels and applicable oncondition actions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is effective March 18, 2020. The Director of the Federal Register approved the incorporation by reference SUMMARY: E:\FR\FM\12FER1.SGM 12FER1

Agencies

[Federal Register Volume 85, Number 29 (Wednesday, February 12, 2020)]
[Rules and Regulations]
[Pages 7863-7865]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-02852]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2020-0093; Product Identifier 2020-NM-026-AD; Amendment 
39-19837; AD 2020-03-12]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by 
two reports of abnormal operation of the components of the ENG START 
panel or ECP due to liquid spillage in the system, and the subsequent 
uncommanded engine inflight shutdown (IFSD) of one engine in each case. 
This AD requires revising the existing airplane flight manual (AFM) to 
define a liquid-prohibited zone in the flight deck and provide 
procedures following liquid spillage on the center pedestal, as 
specified in a European Union Aviation Safety Agency (EASA) AD, which 
is incorporated by reference. The FAA is issuing this AD to address the 
unsafe condition on these products.

DATES: This AD becomes effective February 14, 2020.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of February 14, 
2020.
    The FAA must receive comments on this AD by March 30, 2020.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590, between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays.
    For the material incorporated by reference (IBR) in this AD, 
contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; 
telephone +49 221 89990 1000; email [email protected]; internet 
www.easa.europa.eu. You may find this IBR material on the EASA website 
at https://ad.easa.europa.eu. You may view this IBR material at the 
FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. 
For information on the availability of this material at the FAA, call 
206-231-3195. It is also available in the AD docket on the internet at 
https://www.regulations.gov by searching for and locating Docket No. 
FAA-2020-0093.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-
0093; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this AD, the regulatory evaluation, any comments received, and other 
information. The street address for Docket Operations is listed above. 
Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Kathleen Arrigotti, Aerospace 
Engineer, International Section, Transport Standards Branch, FAA, 2200 
South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3218; 
email [email protected].

SUPPLEMENTARY INFORMATION: 

Discussion

    The EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA Emergency AD 2020-0020-E, dated 
February 5, 2020, corrected February 6, 2020 (``EASA AD 2020-0020-E'') 
(also referred to as the Mandatory Continuing Airworthiness 
Information, or ``the MCAI''), to address an unsafe condition for all 
Airbus SAS Model A350-941 and -1041 airplanes.
    This AD was prompted by two reports of abnormal operation of the 
components of the ENG START panel or ECP due to liquid spillage in the 
system, and the subsequent uncommanded engine IFSD of one engine in 
each case. The FAA is issuing this AD to address the potential for 
dual-engine IFSD, possibly resulting in a forced landing with 
consequent damage to the airplane and injury to occupants. See the MCAI 
for additional background information.

Related IBR Material Under 1 CFR Part 51

    EASA AD 2020-0020-E describes procedures for revising the existing 
airplane flight manual (AFM) to define a liquid-prohibited zone in the 
flight deck and provide procedures following liquid spillage on the 
center pedestal. This material is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in the ADDRESSES section.

FAA's Determination

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to a

[[Page 7864]]

bilateral agreement with the State of Design Authority, the FAA has 
been notified of the unsafe condition described in the MCAI referenced 
above. The FAA is issuing this AD because the agency evaluated all 
pertinent information and determined the unsafe condition exists and is 
likely to exist or develop on other products of the same type design.

Requirements of This AD

    This AD requires accomplishing the actions specified in EASA AD 
2020-0020-E described previously, as incorporated by reference, except 
for any differences identified as exceptions in the regulatory text of 
this AD.

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA initially worked with Airbus and EASA to develop a 
process to use certain EASA ADs as the primary source of information 
for compliance with requirements for corresponding FAA ADs. The FAA has 
since coordinated with other manufacturers and civil aviation 
authorities (CAAs) to use this process. As a result, EASA AD 2020-0020-
E is incorporated by reference in this final rule. This AD, therefore, 
requires compliance with EASA AD 2020-0020-E in its entirety, through 
that incorporation, except for any differences identified as exceptions 
in the regulatory text of this AD. Using common terms that are the same 
as the heading of a particular section in the EASA AD does not mean 
that operators need comply only with that section. For example, where 
the AD requirement refers to ``all required actions and compliance 
times,'' compliance with this AD requirement is not limited to the 
section titled ``Required Action(s) and Compliance Time(s)'' in the 
EASA AD. Service information specified in EASA AD 2020-0020-E that is 
required for compliance with EASA AD 2020-0020-E is available on the 
internet at https://www.regulations.gov by searching for and locating 
Docket No. FAA-2020-0093.

FAA's Justification and Determination of the Effective Date

    An unsafe condition exists that requires the immediate adoption of 
this AD without providing an opportunity for public comments prior to 
adoption. The FAA has found that the risk to the flying public 
justifies waiving notice and comment prior to adoption of this rule 
because abnormal operation of the components of the ENG START panel or 
ECP due to liquid spillage in the system could result in dual-engine 
IFSD, possibly resulting in a forced landing with consequent damage to 
the airplane and injury to occupants. Therefore, the FAA finds good 
cause that notice and opportunity for prior public comment are 
impracticable. In addition, for the reasons stated above, the FAA finds 
that good cause exists for making this amendment effective in less than 
30 days.

Regulatory Flexibility Act (RFA)

    The requirements of the RFA do not apply when an agency finds good 
cause pursuant to 5 U.S.C. 553 to adopt a rule without prior notice and 
comment. Because the FAA has determined that it has good cause to adopt 
this rule without notice and comment, RFA analysis is not required.

Comments Invited

    This AD is a final rule that involves requirements affecting flight 
safety, and the FAA did not precede it by notice and opportunity for 
public comment. The FAA invites you to send any written relevant data, 
views, or arguments about this AD. Send your comments to an address 
listed under the ADDRESSES section. Include ``Docket No. FAA-2020-0093; 
Product Identifier 2020-NM-026-AD'' at the beginning of your comments. 
The FAA specifically invites comments on the overall regulatory, 
economic, environmental, and energy aspects of this AD. The FAA will 
consider all comments received by the closing date and may amend this 
AD based on those comments.
    The FAA will post all comments received, without change, to https://www.regulations.gov, including any personal information you provide. 
The FAA will also post a report summarizing each substantive verbal 
contact received about this AD.

Interim Action

    The FAA considers this AD interim action. If final action is later 
identified, the FAA might consider further rulemaking then.

Costs of Compliance

    The FAA estimates that this AD affects 13 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
                          Labor cost                              Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
1 work-hour x $85 per hour = $85.............................              $0              $85           $1,105
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    The FAA determined that this AD will not have federalism 
implications under Executive Order 13132. This AD will not have a 
substantial direct effect on the States, on the relationship between 
the national government and the States, or on the distribution of power 
and responsibilities among the various levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866, and
    (2) Will not affect intrastate aviation in Alaska.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

[[Page 7865]]

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2020-03-12 Airbus SAS: Amendment 39-19837; Docket No. FAA-2020-0093; 
Product Identifier 2020-NM-026-AD.

(a) Effective Date

    This AD becomes effective February 14, 2020.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to all Airbus SAS Model A350-941 and -1041 
airplanes, certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 76, Engine 
controls.

(e) Reason

    This AD was prompted by two reports of abnormal operation of the 
components of the ENG START panel or ECP due to liquid spillage in 
the system, and the subsequent uncommanded engine inflight shutdown 
(IFSD) of one engine in each case. The FAA is issuing this AD to 
address the potential for dual-engine IFSD, possibly resulting in a 
forced landing with consequent damage to the airplane and injury to 
occupants.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2020-0020-E, dated February 5, 2020, corrected February 6, 2020 
(``EASA AD 2020-0020-E'').

(h) Exceptions to EASA AD 2020-0020-E

    (1) Where EASA AD 2020-0020-E refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) The ``Remarks'' section of EASA AD 2020-0020-E does not 
apply to this AD.

(i) Credit for Previous Actions

    This paragraph provides credit for actions required by this AD, 
if those actions were performed before the effective date of this AD 
using EASA AD 2020-0020-E, dated February 5, 2020.

(j) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Section, Transport Standards Branch, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the International Section, send it to the attention of 
the person identified in paragraph (k) of this AD. Information may 
be emailed to: [email protected]. Before using any 
approved AMOC, notify your appropriate principal inspector, or 
lacking a principal inspector, the manager of the local flight 
standards district office/certificate holding district office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Section, Transport Standards Branch, FAA; or EASA; or Airbus SAS's 
EASA Design Organization Approval (DOA). If approved by the DOA, the 
approval must include the DOA-authorized signature.
    (3) Required for Compliance (RC): For any service information 
referenced in EASA AD 2020-0020-E that contains RC procedures and 
tests: Except as required by paragraph (j)(2) of this AD, RC 
procedures and tests must be done to comply with this AD; any 
procedures or tests that are not identified as RC are recommended. 
Those procedures and tests that are not identified as RC may be 
deviated from using accepted methods in accordance with the 
operator's maintenance or inspection program without obtaining 
approval of an AMOC, provided the procedures and tests identified as 
RC can be done and the airplane can be put back in an airworthy 
condition. Any substitutions or changes to procedures or tests 
identified as RC require approval of an AMOC.

(k) Related Information

    For more information about this AD, contact Kathleen Arrigotti, 
Aerospace Engineer, International Section, Transport Standards 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 
and fax 206-231-3218; email [email protected].

(l) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2020-0020-E, 
dated February 5, 2020, corrected February 6, 2020.
    (ii) [Reserved]
    (3) For information about EASA AD 2020-0020-E, contact the EASA, 
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 
89990 6017; email [email protected]; Internet www.easa.europa.eu. 
You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.
    (4) You may view this material at the FAA, Transport Standards 
Branch, 2200 South 216th St., Des Moines, WA. For information on the 
availability of this material at the FAA, call 206-231-3195. This 
material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-
2020-0093.
    (5) You may view this material that is incorporated by reference 
at the National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, email 
[email protected], or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on February 7, 2020.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. 2020-02852 Filed 2-10-20; 11:15 am]
 BILLING CODE 4910-13-P