Foreign-Trade Zone 107-Polk County, Iowa; Application for Subzone; Warehouse Specialists, LLC; Council Bluffs, Iowa, 7919 [2020-02787]

Download as PDF Federal Register / Vol. 85, No. 29 / Wednesday, February 12, 2020 / Notices the 2019 SAS and collected electronically through the Census Bureau’s Centurion online reporting system. Respondents will be sent an initial letter with instructions detailing how to log into the instrument and report their information. These letters will be addressed to the location’s CNO. Before mailing, the Census Bureau will attempt to identify the CNO at each location. In instances where the CNO is not identifiable, the letter will be addressed to the hospital’s administrative office with attention to the CNO. Collection is scheduled to begin in September 2020 and end in April 2021. Paperwork Reduction Act Notwithstanding, any other provision of law, no person is required to respond to, nor shall a person be subject to a penalty for failure to comply with a collection of information subject to the requirements of the Paperwork Reduction Act (PRA) unless that collection of information displays a currently valid OMB control number. In accordance with the PRA, 44 United States Code, Chapter 45, the Census Bureau will submit a request for approval to the OMB for approval of the MOPS–HP. Dated: February 5, 2020. Steven D. Dillingham, Director, Bureau of the Census. [FR Doc. 2020–02758 Filed 2–11–20; 8:45 am] BILLING CODE 3510–07–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–07–2020] lotter on DSKBCFDHB2PROD with NOTICES Foreign-Trade Zone (FTZ) 52— Hauppauge, New York, Notification of Proposed Production Activity, Regent Tek Industries, Inc. (Road Marking Material), Shirley, New York Regent Tek Industries, Inc. (Regent Tek), submitted a notification of proposed production activity to the FTZ Board for its facility in Shirley, New York. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on January 31, 2020. Regent Tek’s facility is located within FTZ 52. The facility is used for the production of thermoplastic road marking material. Pursuant to 15 CFR 400.14(b), FTZ activity would be limited to the specific foreign-status materials and components and specific finished products described in the submitted notification (as described below) and VerDate Sep<11>2014 17:03 Feb 11, 2020 Jkt 250001 subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Regent Tek from customs duty payments on the foreign-status components used in export production. On its domestic sales, for the foreignstatus materials/components noted below, Regent Tek would be able to choose the duty rates during customs entry procedures that apply to thermoplastic granular road marking material (duty rate 3.2%). Regent Tek would be able to avoid duty on foreignstatus components which become scrap/ waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include: Titanium dioxide (TiO2); glass beads (M247 Type 1); resins—pentaerythritol ester of rosin and alkyd gum-based resin; and, stearic acid—saturated fatty acid (duty rate ranges from 2.1c/kg + 3.8% to 6%). The request indicates that certain materials/ components are subject to special duties under Section 301 of the Trade Act of 1974 (Section 301), depending on the country of origin. The applicable Section 301 decisions require subject merchandise to be admitted to FTZs in privileged foreign status (19 CFR 146.41). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is March 23, 2020. A copy of the notification will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Christopher Wedderburn at Chris.Wedderburn@trade.gov or (202) 482–1963. 7919 Board) by the Iowa Foreign Trade Zone Corporation, grantee of FTZ 107, requesting subzone status for the facility of Warehouse Specialists, LLC, located in Council Bluffs, Iowa. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a–81u), and the regulations of the Board (15 CFR part 400). It was formally docketed on February 7, 2020. The proposed subzone (48.04 acres) is located at 19301 Bunge Avenue (Highway H10), Council Bluffs, Iowa. No authorization for production activity has been requested at this time. The proposed subzone would be subject to the existing activation limit of FTZ 107. In accordance with the Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is March 23, 2020. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to April 7, 2020. A copy of the application will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: February 7, 2020. Andrew McGilvray, Executive Secretary. [FR Doc. 2020–02787 Filed 2–11–20; 8:45 am] BILLING CODE 3510–DS–P Dated: February 7, 2020. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2020–02788 Filed 2–11–20; 8:45 am] [A–469–815] International Trade Administration BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board Foreign-Trade Zone 107—Polk County, Iowa; Application for Subzone; Warehouse Specialists, LLC; Council Bluffs, Iowa An application has been submitted to the Foreign-Trade Zones Board (the Frm 00003 Fmt 4703 Sfmt 4703 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) finds that sales of finished carbon steel flanges (flanges) from Spain were made at less than normal value during the period of review (POR), February 8, 2017 through May 31, 2018. AGENCY: [S–27–2020] PO 00000 Finished Carbon Steel Flanges From Spain: Final Results of Antidumping Duty Administrative Review; 2017– 2018 E:\FR\FM\12FEN1.SGM 12FEN1

Agencies

[Federal Register Volume 85, Number 29 (Wednesday, February 12, 2020)]
[Notices]
[Page 7919]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-02787]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-27-2020]


Foreign-Trade Zone 107--Polk County, Iowa; Application for 
Subzone; Warehouse Specialists, LLC; Council Bluffs, Iowa

    An application has been submitted to the Foreign-Trade Zones Board 
(the Board) by the Iowa Foreign Trade Zone Corporation, grantee of FTZ 
107, requesting subzone status for the facility of Warehouse 
Specialists, LLC, located in Council Bluffs, Iowa. The application was 
submitted pursuant to the provisions of the Foreign-Trade Zones Act, as 
amended (19 U.S.C. 81a-81u), and the regulations of the Board (15 CFR 
part 400). It was formally docketed on February 7, 2020.
    The proposed subzone (48.04 acres) is located at 19301 Bunge Avenue 
(Highway H10), Council Bluffs, Iowa. No authorization for production 
activity has been requested at this time. The proposed subzone would be 
subject to the existing activation limit of FTZ 107.
    In accordance with the Board's regulations, Elizabeth Whiteman of 
the FTZ Staff is designated examiner to review the application and make 
recommendations to the Executive Secretary.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary and sent to: 
[email protected]. The closing period for their receipt is March 23, 2020. 
Rebuttal comments in response to material submitted during the 
foregoing period may be submitted during the subsequent 15-day period 
to April 7, 2020.
    A copy of the application will be available for public inspection 
in the ``Reading Room'' section of the Board's website, which is 
accessible via www.trade.gov/ftz.
    For further information, contact Elizabeth Whiteman at 
[email protected] or (202) 482-0473.

    Dated: February 7, 2020.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2020-02787 Filed 2-11-20; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.