Accreditation and Approval of Saybolt LP (Mobile, AL) as a Commercial Gauger and Laboratory, 2140-2141 [2020-00352]

Download as PDF lotter on DSKBCFDHB2PROD with NOTICES 2140 Federal Register / Vol. 85, No. 9 / Tuesday, January 14, 2020 / Notices Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593–7509. FOR FURTHER INFORMATION CONTACT: Mr. Matthew Layman, Alternate Designated Federal Officer of the National Towing Safety Advisory Committee; Telephone 202–372–1421; or Email at Matthew.D.Layman@uscg.mil. SUPPLEMENTARY INFORMATION: The National Towing Safety Advisory Committee is a Federal advisory committee. It will operate under the provisions of the Federal Advisory Committee Act, 5 United States Code, Appendix, and the administrative provisions in Section 601 of the Frank LoBiondo Coast Guard Authorization Act of 2018 (specifically, 46 U.S.C. 15109). The Committee was established on December 4, 2018, by the Frank LoBiondo Coast Guard Authorization Act of 2018, which added section 15108, National Towing Safety Advisory Committee, to Title 46 of the U.S. Code (46 U.S.C. 15108). The Committee will advise the Secretary of Homeland Security on matters relating to shallowdraft inland navigation, coastal waterway navigation, and towing safety. The Committee is required to hold meetings at least once a year in accordance with 46 U.S.C. 15109(a). The meetings are generally held in cities that have a high concentration of towingindustry and related businesses. All members serve at their own expense and receive no salary or other compensation from the Federal Government. Members may be reimbursed, however, for travel and per diem in accordance with Federal Travel Regulations. Under provisions in 46 U.S.C. 15109(f)(6), if you are appointed as a member of the Committee, your membership term will expire on December 31 of the third full year after the effective date of your appointment. In this initial solicitation for Committee members, we will consider applications for all 18 positions: • Seven members to represent the barge and towing industry, reflecting a regional geographic balance; • One member to represent the offshore mineral and oil supply vessel industry; • One member to represent masters and pilots of towing vessels who hold active licenses and have experience on the Western Rivers and the Gulf Intracoastal Waterway; • One member to represent masters of towing vessels in offshore service who hold active licenses; VerDate Sep<11>2014 18:41 Jan 13, 2020 Jkt 250001 • One member to represent masters of active ship-docking or harbor towing vessels; • One member to represent licensed and unlicensed towing vessel engineers with formal training and experience; • Two members to represent port districts, authorities, or terminal operators; • Two members to represent shippers and, of the two, one engaged in the shipment of oil or hazardous materials by barge; and • Two members drawn from the general public. Each member of the Committee must have particular expertise, knowledge, and experience in matters relating to the function of the Committee which is to advise the Secretary of Homeland Security on matters relating to shallowdraft inland navigation, coastal waterway navigation, and towing safety. If you are selected as a member drawn from the general public, you will be appointed and serve as a Special Government Employee as defined in section 202(a) of Title 18, United States Code. Applicants for appointment as a Special Government Employee are required to complete a Confidential Financial Disclosure Report (OGE Form 450) for new entrants and if appointed as a member must submit Form 450 annually. The Coast Guard may not release the reports or the information in them to the public except under an order issued by a Federal Court or as otherwise provided under the Privacy Act (5 U.S.C. 552a). Only the Designated U.S. Coast Guard Ethics Official or his or her designee may release a Confidential Financial Disclosure Report. Applicants can obtain this form by going to the website of the Office of Government Ethics (www.oge.gov), or by calling or emailing the individual listed above in the FOR FURTHER INFORMATION CONTACT section. Registered lobbyists are not eligible to serve on Federal Advisory Committees in an individual capacity. See ‘‘Revised Guidance on Appointment of Lobbyists to Federal Advisory Committees, Boards and Commissions’’ (79 FR 47482, August 13, 2014). Registered lobbyists are ‘‘lobbyists,’’ as defined in 2 U.S.C. 1602, who are required by 2 U.S.C. 1603 to register with the Secretary of the Senate and the Clerk of the House of Representatives. The Department of Homeland Security does not discriminate in selection of Committee members on the basis of race, color, religion, sex, national origin, political affiliation, sexual orientation, gender identity, marital status, disabilities and genetic information, age, membership in an PO 00000 Frm 00037 Fmt 4703 Sfmt 4703 employee organization, or any other non-merit factor. The Department of Homeland Security strives to achieve a widely diverse candidate pool for all of its recruitment selections. If you are interested in applying to become a member of the Committee, send your cover letter and resume to Mr. Matthew Layman, Alternate Designated Federal Officer of the National Towing Safety Advisory Committee via one of the transmittal methods in the ADDRESSES section by the deadline in the DATES section of this notice. If you send your application to us via email, we will send you an email confirming receipt of your application. Dated: January 8, 2020. Jeffrey G. Lantz, Director of Commercial Regulations and Standards. [FR Doc. 2020–00354 Filed 1–13–20; 8:45 am] BILLING CODE 9110–04–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Accreditation and Approval of Saybolt LP (Mobile, AL) as a Commercial Gauger and Laboratory U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of accreditation and approval of Saybolt LP (Mobile, AL), as a commercial gauger and laboratory. AGENCY: Notice is hereby given, pursuant to CBP regulations, that Saybolt LP (Mobile, AL), has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of May 15, 2019. DATES: Saybolt LP (Mobile, AL) was approved and accredited as a commercial gauger and laboratory as of May 15, 2019. The next triennial inspection date will be scheduled for May 2022. FOR FURTHER INFORMATION CONTACT: Dr. Justin Shey, Laboratories and Scientific Services, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, Washington, DC 20229, tel. 202–344–1060. SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Saybolt LP, 11 Midtown Park East, Mobile, AL 36606, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain SUMMARY: E:\FR\FM\14JAN1.SGM 14JAN1 Federal Register / Vol. 85, No. 9 / Tuesday, January 14, 2020 / Notices petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Saybolt LP (Mobile, AL) is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API): Title 3 ..................... 7 ..................... 8 ..................... 11 ................... 12 ................... 17 ................... Tank Gauging. Temperature Determination. Sampling. Physical Properties Data. Calculations. Marine Measurement. Saybolt LP (Mobile, AL) is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM): CBPL No. ASTM Title 27–01 .............. 27–02 .............. D 287 ..... D 1298 ... 27–03 27–04 27–05 27–06 27–08 27–11 D D D D D D Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. Standard Test Method for Water in Crude Oil by Distillation. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration. Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure. Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity). Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry. Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester. Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method). .............. .............. .............. .............. .............. .............. 4006 ... 95 ....... 4928 ... 473 ..... 86 ....... 445 ..... 27–13 .............. D 4294 ... 27–48 .............. 27–50 .............. 27–58 .............. D 4052 ... D 93 ....... D 5191 ... Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. http://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. Dated: January 02, 2020. Dave Fluty, Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2020–00352 Filed 1–13–20; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR–7011–N–63] lotter on DSKBCFDHB2PROD with NOTICES API chapters 2141 30-Day Notice of Proposed Information Collection: Ginnie Mae Multiclass Securities Program Documents; OMB #2503–0030 Office of the Chief Information Officer, HUD. AGENCY: VerDate Sep<11>2014 18:41 Jan 13, 2020 Jkt 250001 ACTION: Notice. HUD is seeking approval from the Office of Management and Budget (OMB) for the information collection described below. In accordance with the Paperwork Reduction Act, HUD is requesting comment from all interested parties on the proposed collection of information. The purpose of this notice is to allow for 30 days of public comment. SUMMARY: Comments Due Date: February 13, 2020. ADDRESSES: Interested persons are invited to submit comments regarding this proposal. Comments should refer to the proposal by name and/or OMB Control Number and should be sent to: HUD Desk Officer, Office of Management and Budget, New Executive Office Building, Washington, DC 20503; fax: 202–395–5806, Email: OIRA Submission@omb.eop.gov. FOR FURTHER INFORMATION CONTACT: Anna P. Guido, Reports Management Officer, QMAC, Department of Housing and Urban Development, 451 7th Street SW, Washington, DC 20410; email her at Anna.P.Guido@hud.gov or telephone 202–402–5535. This is not a toll-free number. Person with hearing or speech impairments may access this number through TTY by calling the toll-free Federal Relay Service at (800) 877–8339. Copies of available documents submitted to OMB may be obtained from Ms. Guido. SUPPLEMENTARY INFORMATION: This notice informs the public that HUD is DATES: PO 00000 Frm 00038 Fmt 4703 Sfmt 4703 seeking approval from OMB for the information collection described in Section A. The Federal Register notice that solicited public comment on the information collection for a period of 60 days was published on November 4, 2019 at 84 FR 59412. A. Overview of Information Collection Title of Information Collection: Ginnie Mae Multiclass Securities Program Documents (Forms and Electronic Data Submissions). OMB Approval Number: 2503–0030. Type of Request: Reinstatement of currently approved collection. Form Number: None. Description of the need for the information and proposed use: This information collection is required in connection with the operation of the Ginnie Mae Multiclass Securities program. Ginnie Mae’s authority to guarantee multiclass instruments is contained in 306(g)(1) of the National Housing Act (‘‘NHA’’) (12 U.S.C. 1721(g)(1)), which authorizes Ginnie Mae to guarantee ‘‘securities * * * based on or backed by a trust or pool composed of mortgages. * * *’’ Multiclass securities are backed by Ginnie Mae securities, which are backed by government insured or guaranteed mortgages. Ginnie Mae’s authority to operate a Multiclass Securities program is recognized in Section 3004 of the Omnibus Budget Reconciliation Act of 1993 (‘‘OBRA’’), which amended 306(g)(3) of the NHA (12 U.S.C. 1271(g)(3)) to provide Ginnie Mae with greater flexibility for the Multiclass E:\FR\FM\14JAN1.SGM 14JAN1

Agencies

[Federal Register Volume 85, Number 9 (Tuesday, January 14, 2020)]
[Notices]
[Pages 2140-2141]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-00352]


-----------------------------------------------------------------------

DEPARTMENT OF HOMELAND SECURITY

U.S. Customs and Border Protection


Accreditation and Approval of Saybolt LP (Mobile, AL) as a 
Commercial Gauger and Laboratory

AGENCY: U.S. Customs and Border Protection, Department of Homeland 
Security.

ACTION: Notice of accreditation and approval of Saybolt LP (Mobile, 
AL), as a commercial gauger and laboratory.

-----------------------------------------------------------------------

SUMMARY: Notice is hereby given, pursuant to CBP regulations, that 
Saybolt LP (Mobile, AL), has been approved to gauge petroleum and 
certain petroleum products and accredited to test petroleum and certain 
petroleum products for customs purposes for the next three years as of 
May 15, 2019.

DATES: Saybolt LP (Mobile, AL) was approved and accredited as a 
commercial gauger and laboratory as of May 15, 2019. The next triennial 
inspection date will be scheduled for May 2022.

FOR FURTHER INFORMATION CONTACT: Dr. Justin Shey, Laboratories and 
Scientific Services, U.S. Customs and Border Protection, 1300 
Pennsylvania Avenue NW, Suite 1500N, Washington, DC 20229, tel. 202-
344-1060.

SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 
151.12 and 19 CFR 151.13, that Saybolt LP, 11 Midtown Park East, 
Mobile, AL 36606, has been approved to gauge petroleum and certain 
petroleum products and accredited to test petroleum and certain

[[Page 2141]]

petroleum products for customs purposes, in accordance with the 
provisions of 19 CFR 151.12 and 19 CFR 151.13.
    Saybolt LP (Mobile, AL) is approved for the following gauging 
procedures for petroleum and certain petroleum products from the 
American Petroleum Institute (API):

------------------------------------------------------------------------
             API chapters                            Title
------------------------------------------------------------------------
3....................................  Tank Gauging.
7....................................  Temperature Determination.
8....................................  Sampling.
11...................................  Physical Properties Data.
12...................................  Calculations.
17...................................  Marine Measurement.
------------------------------------------------------------------------

    Saybolt LP (Mobile, AL) is accredited for the following laboratory 
analysis procedures and methods for petroleum and certain petroleum 
products set forth by the U.S. Customs and Border Protection Laboratory 
Methods (CBPL) and American Society for Testing and Materials (ASTM):

------------------------------------------------------------------------
        CBPL No.                 ASTM                    Title
------------------------------------------------------------------------
27-01...................  D 287.............  Standard Test Method for
                                               API Gravity of Crude
                                               Petroleum and Petroleum
                                               Products (Hydrometer
                                               Method).
27-02...................  D 1298............  Standard Test Method for
                                               Density, Relative Density
                                               (Specific Gravity), or
                                               API Gravity of Crude
                                               Petroleum and Liquid
                                               Petroleum Products by
                                               Hydrometer Method.
27-03...................  D 4006............  Standard Test Method for
                                               Water in Crude Oil by
                                               Distillation.
27-04...................  D 95..............  Standard Test Method for
                                               Water in Petroleum
                                               Products and Bituminous
                                               Materials by
                                               Distillation.
27-05...................  D 4928............  Standard Test Method for
                                               Water in Crude Oils by
                                               Coulometric Karl Fischer
                                               Titration.
27-06...................  D 473.............  Standard Test Method for
                                               Sediment in Crude Oils
                                               and Fuel Oils by the
                                               Extraction Method.
27-08...................  D 86..............  Standard Test Method for
                                               Distillation of Petroleum
                                               Products at Atmospheric
                                               Pressure.
27-11...................  D 445.............  Standard Test Method for
                                               Kinematic Viscosity of
                                               Transparent and Opaque
                                               Liquids (and Calculation
                                               of Dynamic Viscosity).
27-13...................  D 4294............  Standard Test Method for
                                               Sulfur in Petroleum and
                                               Petroleum Products by
                                               Energy-Dispersive X-ray
                                               Fluorescence
                                               Spectrometry.
27-48...................  D 4052............  Standard Test Method for
                                               Density and Relative
                                               Density of Liquids by
                                               Digital Density Meter.
27-50...................  D 93..............  Standard Test Methods for
                                               Flash-Point by Pensky-
                                               Martens Closed Cup
                                               Tester.
27-58...................  D 5191............  Standard Test Method For
                                               Vapor Pressure of
                                               Petroleum Products (Mini
                                               Method).
------------------------------------------------------------------------

    Anyone wishing to employ this entity to conduct laboratory analyses 
and gauger services should request and receive written assurances from 
the entity that it is accredited or approved by the U.S. Customs and 
Border Protection to conduct the specific test or gauger service 
requested. Alternatively, inquiries regarding the specific test or 
gauger service this entity is accredited or approved to perform may be 
directed to the U.S. Customs and Border Protection by calling (202) 
344-1060. The inquiry may also be sent to [email protected]. 
Please reference the website listed below for a complete listing of CBP 
approved gaugers and accredited laboratories. http://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.

    Dated: January 02, 2020.
Dave Fluty,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2020-00352 Filed 1-13-20; 8:45 am]
BILLING CODE 9111-14-P