Foreign-Trade Zone (FTZ) 33-Pittsburgh, Pennsylvania; Notification of Proposed Production Activity; Steelite International USA, Inc. (Hospitality Industry Serveware); New Castle, Pennsylvania, 55550-55551 [2019-22658]
Download as PDF
<![CDATA[
55550
Federal Register / Vol. 84, No. 201 / Thursday, October 17, 2019 / Notices
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment. The request
indicates that the savings from FTZ
procedures would help expand the
plant’s sugar blend operations and allow
Arbor to ‘‘reactivate’’ its commercial
activity.
In accordance with the FTZ Board’s
regulations, Juanita Chen and Elizabeth
Whiteman of the FTZ Staff are
designated examiners to evaluate and
analyze the facts and information
presented in the application and case
record and to report findings and
recommendations to the FTZ Board.
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary and sent to ftz@trade.gov. The
closing period for their receipt is
December 16, 2019. Rebuttal comments
in response to material submitted
during the foregoing period may be
submitted during the subsequent 15-day
period to December 31, 2019.
A copy of the application will be
available for public inspection in the
‘‘Reading Room’’ section of the FTZ
Board’s website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378, or Elizabeth
Whiteman at elizabeth.whiteman@
trade.gov or 202–482–0473.
Dated: October 10, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019–22659 Filed 10–16–19; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–64–2019]
Foreign-Trade Zone (FTZ) 33—
Pittsburgh, Pennsylvania; Notification
of Proposed Production Activity;
Steelite International USA, Inc.
(Hospitality Industry Serveware); New
Castle, Pennsylvania
Steelite International USA, Inc.
(Steelite) submitted a notification of
proposed production activity to the FTZ
Board for its facility in New Castle,
Pennsylvania. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on October 3,
2019.
The Steelite facility is located within
FTZ 33. The facility will be used for
production of tableware and serveware
for the hotel and restaurant industries.
VerDate Sep<11>2014
17:26 Oct 16, 2019
Jkt 250001
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status materials and components
and specific finished products described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt Steelite from customs
duty payments on the foreign-status
components used in export production.
On its domestic sales, for the foreignstatus materials/components noted
below, Steelite would be able to choose
the duty rates during customs entry
procedures that apply to: brass faucet
body for juice dispenser combined with
shank; buffet transport cart; buffet
display cart; buffet display with
melamine trays; carving board set with
heat lamp; chafer for use with a grill
(butane, electric, or Sterno®); chromeplated chafer knob; coffee urn (electric
heat); glass shelving for buffet display
with stainless steel stand; granite
carving board with stainless steel frame;
ice box with plastic inserts; complete
induction food warming table; complete
induction heating stand; polycarbonate
carving board with stainless steel frame;
buffet set including wooden risers, steel
stand with glass shelves, and induction
warmers with their parts; cast iron
chafer (for use with any heat source);
various steel products (heat lamp;
induction chafer; chafer with electric
heat; soup heater (electric heat)); various
stainless steel products (insulated coffee
urn; body for insulated coffee urn with
faucet, clamp, and faucet seal washer;
chafer and frame (used with electric
heat and Sterno®); insulated coffee urn
cover; juice dispenser cover with knob;
ice box with plastic inserts; ice cream
box; insulated milk container; pastry
stand with trays; circular seafood
display (elevated platter); bucket; plastic
coated buffet riser; carving station
frame; beverage tub); various
polycarbonate juice dispensers (with
stainless steel frame and stand; with
stainless steel faucet and without cover;
with silver-plated stainless steel cover
and stand; with stainless steel cover and
stand; with stainless steel cover and
wood stand; with stainless steel frame);
various polycarbonate juicers (with
stainless steel cover and stand; with
stainless steel frame; with stainless steel
frame and wood stand); various iron or
steel products (portable grill; grill
cooker for use with solid fuel; Sterno®
chafer; Sterno® grill riser box; Sterno®
chafer frame; stand for portable grill
with aluminum plate and iron or steel
frame); various silver-plated stainless
steel products (faucet insert set for
chafer; insulated urn; circular seafood
PO 00000
Frm 00011
Fmt 4703
Sfmt 4703
display (elevated platter); stand for
polycarbonate juice dispenser; round
grill chafer cover; coffee pot); and,
various wood products (juice dispenser
stand; buffet display set (primarily
wooden with minority stainless steel
risers and glass shelves); carving board)
(duty rate ranges from duty-free to
7.2%). Steelite would be able to avoid
duty on foreign-status components
which become scrap/waste. Customs
duties also could possibly be deferred or
reduced on foreign-status production
equipment.
The components and materials
sourced from abroad include: various
aluminum components (disk for chafers
and/or soup heaters to regulate heat;
pastry stand with shelves; plate for
butane cooker and carving board frame;
plate for induction warmer set; tray);
base for stainless steel pastry stand;
buffet display cart and/or transport cart
components (bungee strap (elastic);
foam liner); burner holder for induction
chafer; ceramic tile; chrome-plated
faucet body set for juice dispenser;
double-sided Velcro®; electric heat plate
for induction warmer; electric heater
and/or heater plate for use with chafers;
electric toggle switch for heat lamp;
electric wire; faucet nut and juicer
shank for juice dispenser; glass shelving
for buffet display; granite carving board;
insulated wire nut; nut for insulated
coffee urn; iron rod base for buffet
display; melamine tray; on and off plate
for toggle switch for heat lamp;
porcelain pan for chafer; power cord
and plug; PVC rod; raw steel buffet
stand; ring terminal; silicone adhesive;
silicone seat cup; stem for stainless steel
chrome-plated faucet; strain relief fitting
for heat lamp; thread lock adhesive;
frame for multi-use chafer stainless steel
with silver plating; heat lamp light bulb;
cast iron chafer; various steel
components (base of heat lamp; handle
for carving board set; buffet display cart
and/or transport cart and its parts
(divider; frame; glass trunk; shelf; ID tag;
bumper rail); electric heating food
warmer; heat lamp shade; heat plate for
induction warmer; induction chafer
without stand; induction warmer;
induction warmer adapter; induction
warmer stand and frame; induction
warming plate; lamp socket; grill grate
for induction warmer set; bridge for
buffet table; magnetic socket holder for
buffet table; adapter to convert Sterno®
holder to electric heater holder; ring for
juice dispenser faucet nuts; plasticcoated buffet riser; warming plate for
induction chafer; induction heater;
induction heater adapter; heat lamp
post; induction heater carving station);
various brass components (chafer knob;
E:\FR\FM\17OCN1.SGM
17OCN1
Federal Register / Vol. 84, No. 201 / Thursday, October 17, 2019 / Notices
juice dispenser parts (faucet adapter;
faucet body without shank; faucet
bonnet; faucet handle; faucet; handle;
knob); foot cover-up for chafer legs;
handle (for carving board set; for ice
cream box; for insulated urn); chafer
cover knob; chafer leg; chafer side
handle); various rubber components
(buffet display cart and/or transport cart
parts (bumper; edge; wheel (with steel
connector)); bumper; edge; buffet cart
wheel); various plastic components
(buffet display cart and/or transport cart
parts (curtain divider; divider clip; lamp
clip); ice box parts (cover; ice mold;
insert; pan); faucet seal washer; post for
glass shelves; resin shelf for buffet
display; attaching strip for buffet cart
curtain; washer; buffet cart wheels);
various iron or steel components (flange
stud; Sterno® chafer frame; helical
spring clamp; insert adapter for top of
chafer (Sterno®); non-flange stud; pan
head screw; adapter plate to convert
between quart capacity for soup heater;
Sterno® chafer cover; grill grate for use
with solid fuel; locknut; lockwasher;
holder for electric heater holder for
chafer; Sterno® chafer holder; Sterno®
chafer stand; washer; water pan (for use
with Sterno® chafers); Sterno® grill riser
box; thumb screw; circular heat lamp
base; spring; screw; thumb nut for
Sterno® chafer; nut; frame for butane
grill; hex head bolt; insert pan for soup
heater (Sterno®); portable grill stand (for
use with fuel)); various stainless steel
components (insulated coffee urn and
its parts (leg stand; body; cover and
knob; side handle; internal shank;
stand); internal bracket and faucet; juice
dispenser knob (brass-plated); knob for
stainless steel cover; wire rack; chafer
stand (for use with electric heat and
Sterno®); carving station frame; adapter
for soup heater to convert between quart
capacity (electric heat or Sterno®); bar
spacing; bar for ice box cover; wine
bucket knob; beverage tub; beverage tub
(plated in another metal); buffet riser;
carving board frame; chafer (used with
electric heat and Sterno®); chafing dish
for use with grills; coffee pot; coffee urn
body; chafer cover (use with electric
heat and Sterno®); chafer cover (Sterno®
heat); faucet adapter for juice dispenser;
faucet ring; food pan; frame for chafer
used with electric heat and/or Sterno®;
frame for soup heater used with electric
heat and/or Sterno®; grill chafer (used
with electric heat and Sterno®); grill
chafer (used with electric heat and
Sterno®) with glass cover; ice box; ice
cream box and its parts (insert; cover;
knob); insulated milk container; juice
dispenser feet; pastry stand; pastry tray;
post and spacers for pastry stand; round
grill chafer cover with silver plating;
VerDate Sep<11>2014
17:26 Oct 16, 2019
Jkt 250001
serving fork; stand for chafers and/or
coffee towers; Sterno® chafer; tile for
use with food cooling unit; top nest for
juice dispenser; top ring for juice
dispenser; water pan; water pan (with
silver plating); juice dispenser cover;
plastic-coated buffet riser; juice
dispenser stand; chrome-plated parts
(faucet handle for juice dispenser; faucet
set for juice dispenser; flex arms for heat
lamp top; faucet body set for juice
dispenser without shank; faucet ring for
juice dispenser); bent pin for faucet
handle for juice dispenser; insert pan for
soup heater; ice bucket; spring for
faucet; chafer (multi-use); faucet handle
for juice dispenser; chafer knob; juice
dispenser knob; soup heater cover
(electric heat or Sterno®)); various
polycarbonate components (body for
juice dispenser with stainless steel
shank and ice ring; body with shank and
ice sleeve for juice dispenser; body with
stainless steel frame for juice dispenser;
body with stainless steel shank and ice
sleeve for juice dispenser; body with
stainless steel shank for juice dispenser;
carving board); various silver-plated
components (juice dispenser knob; ring
for juice dispenser faucet nuts; juice
dispenser stand); various silver-plated
stainless steel components (juice
dispenser cover; carving station frame;
knob for polycarbonate juice dispenser;
stand for polycarbonate juice dispenser;
handle for carving display); and, various
wood components (juice dispenser
stand; buffet riser; carving board) (duty
rate ranges from duty-free to 25%). The
request indicates that certain materials/
components are subject to special duties
under Section 301 of the Trade Act of
1974 (Section 301), depending on the
country of origin. The applicable
Section 301 decisions require subject
merchandise to be admitted to FTZs in
privileged foreign status (19 CFR
146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is
November 26, 2019.
A copy of the notification will be
available for public inspection in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
Dated: October 10, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019–22658 Filed 10–16–19; 8:45 am]
BILLING CODE 3510–DS–P
PO 00000
Frm 00012
Fmt 4703
Sfmt 4703
55551
DEPARTMENT OF COMMERCE
International Trade Administration
[A–475–835]
Finished Carbon Steel Flanges From
Italy: Preliminary Results of
Antidumping Duty Administrative
Review; 2017–2018
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) preliminarily determines
that finished carbon steel flanges from
Italy are being sold in the United States
at less than normal value during the
period of review (POR). The POR is
February 8, 2017 through July 31, 2018.
Interested parties are invited to
comment on these preliminary results.
DATES: Applicable October 17, 2019.
FOR FURTHER INFORMATION CONTACT:
Edythe Artman or Brian C. Davis, AD/
CVD Operations, Office VI, Enforcement
and Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone:
(202) 482–3931 or (202) 482–7924,
respectively.
AGENCY:
SUPPLEMENTARY INFORMATION:
Background
These preliminary results of review
are issued in accordance with section
751(a) of the Tariff Act of 1930, as
amended (the Act). On October 4, 2018,
in accordance with section 751(a) of the
Act and 19 CFR 351.221(c)(1)(i),
Commerce published the notice of
initiation for the administrative review.1
In the Initiation Notice, Commerce
stated that, where appropriate, it
intended to select respondents based on
U.S. Customs and Border Protection
(CBP) data for U.S. imports during the
POR.2 After receiving no comments on
the CBP data from parties with an
administrative protective order,
Commerce selected ASFO S.p.A.
(ASFO) and Forgital Italy S.p.A.
(Forgital) from 27 possible respondents
for individual examination in this
review.3
Commerce exercised its discretion to
toll all deadlines affected by the partial
federal government closure from
December 22, 2018 through the
1 See Initiation of Antidumping and
Countervailing Duty Administrative Reviews, 83 FR
50077 (October 4, 2018) (Initiation Notice).
2 Id.
3 See Memorandum, ‘‘Antidumping Duty
Administrative Review of Finished Carbon Steel
Flanges from Italy: Respondent Selection,’’ dated
November 16, 2018, 1–5.
E:\FR\FM\17OCN1.SGM
17OCN1
]]>Agencies
[Federal Register Volume 84, Number 201 (Thursday, October 17, 2019)]
[Notices]
[Pages 55550-55551]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-22658]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-64-2019]
Foreign-Trade Zone (FTZ) 33--Pittsburgh, Pennsylvania;
Notification of Proposed Production Activity; Steelite International
USA, Inc. (Hospitality Industry Serveware); New Castle, Pennsylvania
Steelite International USA, Inc. (Steelite) submitted a
notification of proposed production activity to the FTZ Board for its
facility in New Castle, Pennsylvania. The notification conforming to
the requirements of the regulations of the FTZ Board (15 CFR 400.22)
was received on October 3, 2019.
The Steelite facility is located within FTZ 33. The facility will
be used for production of tableware and serveware for the hotel and
restaurant industries. Pursuant to 15 CFR 400.14(b), FTZ activity would
be limited to the specific foreign-status materials and components and
specific finished products described in the submitted notification (as
described below) and subsequently authorized by the FTZ Board.
Production under FTZ procedures could exempt Steelite from customs
duty payments on the foreign-status components used in export
production. On its domestic sales, for the foreign-status materials/
components noted below, Steelite would be able to choose the duty rates
during customs entry procedures that apply to: brass faucet body for
juice dispenser combined with shank; buffet transport cart; buffet
display cart; buffet display with melamine trays; carving board set
with heat lamp; chafer for use with a grill (butane, electric, or
Sterno[supreg]); chrome-plated chafer knob; coffee urn (electric heat);
glass shelving for buffet display with stainless steel stand; granite
carving board with stainless steel frame; ice box with plastic inserts;
complete induction food warming table; complete induction heating
stand; polycarbonate carving board with stainless steel frame; buffet
set including wooden risers, steel stand with glass shelves, and
induction warmers with their parts; cast iron chafer (for use with any
heat source); various steel products (heat lamp; induction chafer;
chafer with electric heat; soup heater (electric heat)); various
stainless steel products (insulated coffee urn; body for insulated
coffee urn with faucet, clamp, and faucet seal washer; chafer and frame
(used with electric heat and Sterno[supreg]); insulated coffee urn
cover; juice dispenser cover with knob; ice box with plastic inserts;
ice cream box; insulated milk container; pastry stand with trays;
circular seafood display (elevated platter); bucket; plastic coated
buffet riser; carving station frame; beverage tub); various
polycarbonate juice dispensers (with stainless steel frame and stand;
with stainless steel faucet and without cover; with silver-plated
stainless steel cover and stand; with stainless steel cover and stand;
with stainless steel cover and wood stand; with stainless steel frame);
various polycarbonate juicers (with stainless steel cover and stand;
with stainless steel frame; with stainless steel frame and wood stand);
various iron or steel products (portable grill; grill cooker for use
with solid fuel; Sterno[supreg] chafer; Sterno[supreg] grill riser box;
Sterno[supreg] chafer frame; stand for portable grill with aluminum
plate and iron or steel frame); various silver-plated stainless steel
products (faucet insert set for chafer; insulated urn; circular seafood
display (elevated platter); stand for polycarbonate juice dispenser;
round grill chafer cover; coffee pot); and, various wood products
(juice dispenser stand; buffet display set (primarily wooden with
minority stainless steel risers and glass shelves); carving board)
(duty rate ranges from duty-free to 7.2%). Steelite would be able to
avoid duty on foreign-status components which become scrap/waste.
Customs duties also could possibly be deferred or reduced on foreign-
status production equipment.
The components and materials sourced from abroad include: various
aluminum components (disk for chafers and/or soup heaters to regulate
heat; pastry stand with shelves; plate for butane cooker and carving
board frame; plate for induction warmer set; tray); base for stainless
steel pastry stand; buffet display cart and/or transport cart
components (bungee strap (elastic); foam liner); burner holder for
induction chafer; ceramic tile; chrome-plated faucet body set for juice
dispenser; double-sided Velcro[supreg]; electric heat plate for
induction warmer; electric heater and/or heater plate for use with
chafers; electric toggle switch for heat lamp; electric wire; faucet
nut and juicer shank for juice dispenser; glass shelving for buffet
display; granite carving board; insulated wire nut; nut for insulated
coffee urn; iron rod base for buffet display; melamine tray; on and off
plate for toggle switch for heat lamp; porcelain pan for chafer; power
cord and plug; PVC rod; raw steel buffet stand; ring terminal; silicone
adhesive; silicone seat cup; stem for stainless steel chrome-plated
faucet; strain relief fitting for heat lamp; thread lock adhesive;
frame for multi-use chafer stainless steel with silver plating; heat
lamp light bulb; cast iron chafer; various steel components (base of
heat lamp; handle for carving board set; buffet display cart and/or
transport cart and its parts (divider; frame; glass trunk; shelf; ID
tag; bumper rail); electric heating food warmer; heat lamp shade; heat
plate for induction warmer; induction chafer without stand; induction
warmer; induction warmer adapter; induction warmer stand and frame;
induction warming plate; lamp socket; grill grate for induction warmer
set; bridge for buffet table; magnetic socket holder for buffet table;
adapter to convert Sterno[supreg] holder to electric heater holder;
ring for juice dispenser faucet nuts; plastic-coated buffet riser;
warming plate for induction chafer; induction heater; induction heater
adapter; heat lamp post; induction heater carving station); various
brass components (chafer knob;
[[Page 55551]]
juice dispenser parts (faucet adapter; faucet body without shank;
faucet bonnet; faucet handle; faucet; handle; knob); foot cover-up for
chafer legs; handle (for carving board set; for ice cream box; for
insulated urn); chafer cover knob; chafer leg; chafer side handle);
various rubber components (buffet display cart and/or transport cart
parts (bumper; edge; wheel (with steel connector)); bumper; edge;
buffet cart wheel); various plastic components (buffet display cart
and/or transport cart parts (curtain divider; divider clip; lamp clip);
ice box parts (cover; ice mold; insert; pan); faucet seal washer; post
for glass shelves; resin shelf for buffet display; attaching strip for
buffet cart curtain; washer; buffet cart wheels); various iron or steel
components (flange stud; Sterno[supreg] chafer frame; helical spring
clamp; insert adapter for top of chafer (Sterno[supreg]); non-flange
stud; pan head screw; adapter plate to convert between quart capacity
for soup heater; Sterno[supreg] chafer cover; grill grate for use with
solid fuel; locknut; lockwasher; holder for electric heater holder for
chafer; Sterno[supreg] chafer holder; Sterno[supreg] chafer stand;
washer; water pan (for use with Sterno[supreg] chafers); Sterno[supreg]
grill riser box; thumb screw; circular heat lamp base; spring; screw;
thumb nut for Sterno[supreg] chafer; nut; frame for butane grill; hex
head bolt; insert pan for soup heater (Sterno[supreg]); portable grill
stand (for use with fuel)); various stainless steel components
(insulated coffee urn and its parts (leg stand; body; cover and knob;
side handle; internal shank; stand); internal bracket and faucet; juice
dispenser knob (brass-plated); knob for stainless steel cover; wire
rack; chafer stand (for use with electric heat and Sterno[supreg]);
carving station frame; adapter for soup heater to convert between quart
capacity (electric heat or Sterno[supreg]); bar spacing; bar for ice
box cover; wine bucket knob; beverage tub; beverage tub (plated in
another metal); buffet riser; carving board frame; chafer (used with
electric heat and Sterno[supreg]); chafing dish for use with grills;
coffee pot; coffee urn body; chafer cover (use with electric heat and
Sterno[supreg]); chafer cover (Sterno[supreg] heat); faucet adapter for
juice dispenser; faucet ring; food pan; frame for chafer used with
electric heat and/or Sterno[supreg]; frame for soup heater used with
electric heat and/or Sterno[supreg]; grill chafer (used with electric
heat and Sterno[supreg]); grill chafer (used with electric heat and
Sterno[supreg]) with glass cover; ice box; ice cream box and its parts
(insert; cover; knob); insulated milk container; juice dispenser feet;
pastry stand; pastry tray; post and spacers for pastry stand; round
grill chafer cover with silver plating; serving fork; stand for chafers
and/or coffee towers; Sterno[supreg] chafer; tile for use with food
cooling unit; top nest for juice dispenser; top ring for juice
dispenser; water pan; water pan (with silver plating); juice dispenser
cover; plastic-coated buffet riser; juice dispenser stand; chrome-
plated parts (faucet handle for juice dispenser; faucet set for juice
dispenser; flex arms for heat lamp top; faucet body set for juice
dispenser without shank; faucet ring for juice dispenser); bent pin for
faucet handle for juice dispenser; insert pan for soup heater; ice
bucket; spring for faucet; chafer (multi-use); faucet handle for juice
dispenser; chafer knob; juice dispenser knob; soup heater cover
(electric heat or Sterno[supreg])); various polycarbonate components
(body for juice dispenser with stainless steel shank and ice ring; body
with shank and ice sleeve for juice dispenser; body with stainless
steel frame for juice dispenser; body with stainless steel shank and
ice sleeve for juice dispenser; body with stainless steel shank for
juice dispenser; carving board); various silver-plated components
(juice dispenser knob; ring for juice dispenser faucet nuts; juice
dispenser stand); various silver-plated stainless steel components
(juice dispenser cover; carving station frame; knob for polycarbonate
juice dispenser; stand for polycarbonate juice dispenser; handle for
carving display); and, various wood components (juice dispenser stand;
buffet riser; carving board) (duty rate ranges from duty-free to 25%).
The request indicates that certain materials/components are subject to
special duties under Section 301 of the Trade Act of 1974 (Section
301), depending on the country of origin. The applicable Section 301
decisions require subject merchandise to be admitted to FTZs in
privileged foreign status (19 CFR 146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is November 26,
2019.
A copy of the notification will be available for public inspection
in the ``Reading Room'' section of the Board's website, which is
accessible via www.trade.gov/ftz.
For further information, contact Juanita Chen at
[email protected] or 202-482-1378.
Dated: October 10, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019-22658 Filed 10-16-19; 8:45 am]
BILLING CODE 3510-DS-P
