Foreign-Trade Zone (FTZ) 38-Spartanburg County, South Carolina; Authorization of Limited Production Activity; Teijin Carbon Fibers, Inc. (Polyacrylonitrile-Based Carbon Fiber); Greenwood, South Carolina, 54837 [2019-22309]

Download as PDF Federal Register / Vol. 84, No. 198 / Friday, October 11, 2019 / Notices DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–38–2019] Foreign-Trade Zone (FTZ) 38— Spartanburg County, South Carolina; Authorization of Limited Production Activity; Teijin Carbon Fibers, Inc. (Polyacrylonitrile-Based Carbon Fiber); Greenwood, South Carolina On June 7, 2019, the South Carolina State Ports Authority, grantee of FTZ 38, submitted a notification of proposed production activity to the FTZ Board on behalf of Teijin Carbon Fibers, Inc., within FTZ 38, in Greenwood, South Carolina. The notification was processed in accordance with the regulations of the FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (84 FR 29496, June 24, 2019). On October 7, 2019, the applicant was notified of the FTZ Board’s decision that further review of part of the proposed activity is warranted. The FTZ Board authorized the production activity described in the notification on a limited basis, subject to the FTZ Act and the Board’s regulations, including Section 400.14, and further subject to a restriction requiring that all foreignstatus polyacrylonitrile (PAN) fiber admitted for production activity must be re-exported (entry for U.S. consumption is not authorized). Dated: October 7, 2019. Andrew McGilvray, Executive Secretary. [FR Doc. 2019–22309 Filed 10–10–19; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–62–2019] jbell on DSK3GLQ082PROD with NOTICES Foreign-Trade Zone (FTZ) 141— Rochester, New York; Notification of Proposed Production Activity; Eastman Kodak Company; (One-Time Use Cameras); Rochester, New York Eastman Kodak Company (Eastman Kodak) submitted a notification of proposed production activity to the FTZ Board for its facility in Rochester, New York. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on September 26, 2019. Eastman Kodak already has authority to produce printer cartridges and thermal media within FTZ 141. The current request would add a finished VerDate Sep<11>2014 17:56 Oct 10, 2019 Jkt 250001 product and a foreign status component to the scope of authority. Pursuant to 15 CFR 400.14(b), additional FTZ authority would be limited to the specific foreignstatus component and specific finished product described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Eastman Kodak from customs duty payments on the foreignstatus materials/components used in export production. On its domestic sales, for the foreign-status materials/ components noted below and in the existing scope of authority, Eastman Kodak would be able to choose the duty rates during customs entry procedures that apply to underwater one-time use cameras (duty-free). Eastman Kodak would be able to avoid duty on foreignstatus components which become scrap/ waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The component sourced from abroad is a non-flash one-time use camera (duty-free). The request indicates that one-time use cameras are subject to special duties under Section 301 of the Trade Act of 1974 (Section 301), depending on the country of origin. The applicable Section 301 decisions require subject merchandise to be admitted to FTZs in privileged foreign status (19 CFR 146.41). Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary and sent to: ftz@trade.gov. The closing period for their receipt is November 20, 2019. A copy of the notification will be available for public inspection in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Christopher Wedderburn at Chris.Wedderburn@trade.gov or (202) 482–1963. Dated: October 7, 2019. Andrew McGilvray, Executive Secretary. [FR Doc. 2019–22308 Filed 10–10–19; 8:45 am] BILLING CODE 3510–DS–P PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 54837 DEPARTMENT OF COMMERCE International Trade Administration [A–588–857] Welded Large Diameter Line Pipe From Japan: Continuation of Antidumping Duty Order Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: As a result of the determinations by the Department of Commerce (Commerce) and the International Trade Commission (ITC) that revocation of the antidumping duty (AD) order on welded large diameter line pipe (line pipe) from Japan would likely lead to a continuation or recurrence of dumping and material injury to an industry in the United States, Commerce is publishing this notice of continuation of the AD order. DATES: Applicable October 11, 2019. FOR FURTHER INFORMATION CONTACT: John McGowan, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–3019. SUPPLEMENTARY INFORMATION: AGENCY: Background On September 11, 2018, Commerce published the notice of initiation of the third sunset review of the AD order on line pipe from Japan, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).1 As a result of the review, Commerce determined that revocation of the AD order on line pipe from Japan would likely lead to a continuation or recurrence of dumping.2 Commerce, therefore, notified the ITC of the magnitude of the dumping margins likely to prevail should the AD order be revoked. On October 3, 2019, the ITC published notice of its determination, pursuant to sections 751(c) and 752(a) of the Act, that revocation of the AD order on line pipe from Japan would likely lead to a continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.3 1 See Initiation of Five-Year (Sunset) Reviews, 83 FR 45887 (September 11, 2018). 2 See Welded Large Diameter Line Pipe from Japan: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order, 84 FR 1059 (February 1, 2019). 3 See Certain Welded Large Diameter Line Pipe from Japan: Investigation No. 731–TA–919 (Third Review), USITC Publication 4973 (September 2019); see also Certain Welded Large Diameter Line Pipe from Japan, 84 FR 52896 (October 3, 2019). E:\FR\FM\11OCN1.SGM 11OCN1

Agencies

[Federal Register Volume 84, Number 198 (Friday, October 11, 2019)]
[Notices]
[Page 54837]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-22309]



[[Page 54837]]

=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-38-2019]


Foreign-Trade Zone (FTZ) 38--Spartanburg County, South Carolina; 
Authorization of Limited Production Activity; Teijin Carbon Fibers, 
Inc. (Polyacrylonitrile-Based Carbon Fiber); Greenwood, South Carolina

    On June 7, 2019, the South Carolina State Ports Authority, grantee 
of FTZ 38, submitted a notification of proposed production activity to 
the FTZ Board on behalf of Teijin Carbon Fibers, Inc., within FTZ 38, 
in Greenwood, South Carolina.
    The notification was processed in accordance with the regulations 
of the FTZ Board (15 CFR part 400), including notice in the Federal 
Register inviting public comment (84 FR 29496, June 24, 2019). On 
October 7, 2019, the applicant was notified of the FTZ Board's decision 
that further review of part of the proposed activity is warranted. The 
FTZ Board authorized the production activity described in the 
notification on a limited basis, subject to the FTZ Act and the Board's 
regulations, including Section 400.14, and further subject to a 
restriction requiring that all foreign-status polyacrylonitrile (PAN) 
fiber admitted for production activity must be re-exported (entry for 
U.S. consumption is not authorized).

    Dated: October 7, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019-22309 Filed 10-10-19; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.