September 11, 2019 – Federal Register Recent Federal Regulation Documents

Results 101 - 102 of 102
Energy Conservation Standards for Computer Room Air Conditioners and Dedicated Outdoor Air Systems
Document Number: 2019-19050
Type: Proposed Rule
Date: 2019-09-11
Agency: Department of Energy
The U.S. Department of Energy (DOE) is publishing an analysis of the energy savings potential of amended industry consensus standards for certain classes of computer room air conditioners (CRACs) and new industry standards for dedicated outdoor air systems (DOASes), which are types of commercial and industrial equipment. The Energy Policy and Conservation Act of 1975, as amended (EPCA), requires DOE to evaluate and assess whether there is a need to update its energy conservation standards following changes to the relevant industry consensus standards in the American Society of Heating, Refrigerating and Air- Conditioning Engineers (ASHRAE) Standard 90.1 (ASHRAE Standard 90.1). Additionally under EPCA, DOE must review the existing standards for this equipment at least once every six years and publish either a notice of proposed rulemaking (NOPR) to propose new standards or a notice of determination that the existing standards do not need to be amended. Accordingly, DOE is also initiating an effort to determine whether to amend the current energy conservation standards for classes of CRACs for which DOE has tentatively determined that the updated ASHRAE Standard 90.1 levels are not more stringent than the current Federal standards. This document solicits information from the public to help DOE determine whether amended standards for CRACs and new standards for DOASes would result in significant energy savings and whether such standards would be technologically feasible and economically justified. DOE welcomes written comments from the public on any subject within the scope of this document (including topics not raised in this document), as well as the submission of data and other relevant information.
Airworthiness Directives; Airbus Helicopters
Document Number: 2019-18704
Type: Rule
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2018-18-12 for Airbus Helicopters (Airbus) Model AS350B, AS350B1, AS350B2, AS350B3, and AS350BA helicopters with a certain part-numbered Pall Aerospace Corporation Inlet Barrier Filter (IBF) element installed. AD 2018-18-12 required revising the Rotorcraft Flight Manual Supplement (RFMS) for your helicopter to prohibit operating a helicopter with an IBF element in wet weather and drying or replacing the IBF element if wet. This AD retains the requirements of AD 2018-18-12 but no longer allows reinstallation of a filter after it has been removed. This AD also expands the applicability, provides an optional terminating action for the RFMS revision for your helicopter, and prohibits installing the affected IBFs on any helicopter. This AD was prompted by further review of the unsafe condition and the determination that additional part- numbered IBF elements are affected by the unsafe condition. The actions of this AD are intended to address an unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.