Information Collection Activity; Comment Request, 18766-18767 [2019-08935]

Download as PDF 18766 Federal Register / Vol. 84, No. 85 / Thursday, May 2, 2019 / Notices sure someone is there to help you, please call (202) 799–7039 before coming. Mr. Marc Phillips, Senior Regulatory Policy Specialist, Regulatory Coordination and Compliance, PPQ, APHIS, 4700 River Road, Unit 133, Riverdale, MD 20737– 1231; (301) 851–2114. SUPPLEMENTARY INFORMATION: Under the regulations in ‘‘Subpart L–Fruits and Vegetables’’ (7 CFR 319.56–1 through 319.56–12, referred to below as the regulations), the Animal and Plant Health Inspection Service (APHIS) prohibits or restricts the importation of fruits and vegetables into the United States from certain parts of the world to prevent plant pests from being introduced into or disseminated within the United States. Section 319.56–4 contains a performance-based process for approving the importation of certain fruits and vegetables that, based on the findings of a pest risk analysis, can be safely imported subject to one or more of the five designated phytosanitary measures listed in paragraph (b) of that section. APHIS received a request from the national plant protection organization (NPPO) of Mexico to allow the importation of fresh sapodilla fruit (Manilkara zapota van Royen) into the continental United States. As part of our evaluation of Mexico’s request, we have prepared a pest list to identify pests of quarantine significance that could follow the pathway of importation of fresh sapodilla fruit into the continental United States from Mexico. Based on the pest list, a risk management document (RMD) was prepared to identify phytosanitary measures that could be applied to the fresh sapodilla fruit to mitigate the pest risk. We have concluded that fresh sapodilla fruit can be safely imported from Mexico into the continental United States using one or more of the five designated phytosanitary measures listed in § 319.56–4(b). The NPPO of Mexico would have to enter into an operational workplan with APHIS that spells out the daily procedures the NPPO will take to implement the measures identified in the RMD. These measures are summarized below: • Importation in commercial shipments only, • Phytosanitary treatment (irradiation with a minimum absorbed dose of 400 Gy), • Pre-export inspection by the NPPO and issuance of a phytosanitary certificate stating that the consignment khammond on DSKBBV9HB2PROD with NOTICES FOR FURTHER INFORMATION CONTACT: VerDate Sep<11>2014 18:51 May 01, 2019 Jkt 247001 was inspected and found free of quarantine pests, and • Port of entry inspections. Each of the pest risk mitigation measures that would be required, along with evidence of their efficacy in removing pests of concern from the pathway, are described in detail in the RMD. Therefore, in accordance with § 319.56–4(c)(3), we are announcing the availability of our pest list and RMD for public review and comment. Those documents, as well as a description of the economic considerations associated with the importation of fresh sapodilla fruit from Mexico, may be viewed on the Regulations.gov website or in our reading room (see ADDRESSES above for a link to Regulations.gov and information on the location and hours of the reading room). You may request paper copies of these documents by calling or writing to the person listed under FOR FURTHER INFORMATION CONTACT. Please refer to the subject of the analysis you wish to review when requesting copies. After reviewing any comments we receive, we will announce our decision regarding the import status of fresh sapodilla fruit from Mexico in a subsequent notice. If the overall conclusions of our analysis and the Administrator’s determination of risk remain unchanged following our consideration of the comments, then we will authorize the importation of fresh sapodilla fruit from Mexico into the continental United States subject to the requirements specified in the RMD. Authority: 7 U.S.C. 1633, 7701–7772, and 7781–7786; 21 U.S.C. 136 and 136a; 7 CFR 2.22, 2.80, and 371.3. Done in Washington, DC, this 26th day of April 2019. Kevin Shea, Administrator, Animal and Plant Health Inspection Service. [FR Doc. 2019–08965 Filed 5–1–19; 8:45 am] BILLING CODE 3410–34–P DEPARTMENT OF AGRICULTURE Rural Business-Cooperative Service Information Collection Activity; Comment Request Rural Business-Cooperative Service, USDA. ACTION: Notice; comment requested. AGENCY: In accordance with the Paperwork Reduction Act of 1995, this notice announces the Rural BusinessCooperative Service’s intention to request an extension for a currently SUMMARY: PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 approved information collection in support of the Rural Economic Development Loan and Grant Program. DATES: Comments on this notice must be received by July 1, 2019, to be assured of consideration. FOR FURTHER INFORMATION CONTACT: Thomas P. Dickson, Rural Development Innovation Center—Regulatory Team 2, USDA, 1400 Independence Avenue SW, STOP 1522, Room 4233, South Building, Washington, DC 20250–1522. Telephone: (202) 690–4492. Email Thomas.dickson@usda.gov. SUPPLEMENTARY INFORMATION: The Office of Management and Budget’s (OMB) regulation (5 CFR 1320) implementing provisions of the Paperwork Reduction Act of 1995 (Pub. L. 104–13) requires that interested members of the public and affected agencies have an opportunity to comment on information collection and recordkeeping activities (see 5 CFR 1320.8(d)). This notice identifies an information collection that RBS is submitting to OMB for extension. Comments are invited on: (a) Whether the proposed collection of information is necessary for the proper performance of the functions of the Agency, including whether the information will have practical utility; (b) the accuracy of the Agency’s estimate of the burden of the proposed collection of information including the validity of the methodology and assumptions used; (c) ways to enhance the quality, utility and clarity of the information to be collected; and (d) ways to minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology. Comments may be sent by any of the following methods: • Mail: Thomas P. Dickson, Rural Development Innovation Center, 1400 Independence Avenue SW, STOP 1522, Room 4233, South Building, Washington, DC 20250–1522. Telephone: (202) 690–4492. Email: Thomas.Dickson@wdc.usda.go. • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. Title: Rural Economic Development Loan and Grant Program. OMB Number: 0570–0035. Type of Request: Revision of a currently approved information collection. Abstract: Under this program, loans and grants are provided to electric and telecommunications utilities that have borrowed funds from the Agency. The E:\FR\FM\02MYN1.SGM 02MYN1 Federal Register / Vol. 84, No. 85 / Thursday, May 2, 2019 / Notices purpose of the program is to encourage these electric and telecommunications utilities to promote rural economic development and job creation projects such as business start-up costs, business expansion, community development, and business incubator projects. The utilities must use program loan funds to make a pass-through loan to an ultimate recipient such as a business. The utility is responsible for fully repaying its loan to the Government, even if the ultimate recipient does not repay its loan. The intermediary must use program grant funds, along with its required contribution, to create a revolving loan fund that the utility will operate and administer. Loans to the ultimate recipient are made from the revolving loan fund for a variety of community development projects. The information requested is necessary and vital in order for the Agency to be able to make prudent and financial analysis decisions. DEPARTMENT OF COMMERCE Estimate of Burden: Public reporting burden for this collection of information is estimated to average 2 hours per response. FOR FURTHER INFORMATION CONTACT: Respondents: Rural Utilities Service Electric and Telecommunications Borrowers. Estimated Number of Respondents: 120. Estimated Number of Responses: 2,180. Estimated Total Annual Burden on Respondents: 4,781. Copies of this information collection can be obtained from Robin M. Jones, Innovation Center, at (202) 772–1172, Email: robin.m.jones@wdc.usda.gov. All responses to this notice will be summarized and included in the request for OMB approval. All comments will also become a matter of public record. [FR Doc. 2019–08935 Filed 5–1–19; 8:45 am] khammond on DSKBBV9HB2PROD with NOTICES BILLING CODE 3410–XY–P [A–580–897] Large Diameter Welded Pipe From the Republic of Korea: Amended Final Affirmative Antidumping Determination and Antidumping Duty Order Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: Based on affirmative final determinations by the Department of Commerce (Commerce) and the International Trade Commission (ITC), Commerce is issuing an antidumping duty order on large diameter welded carbon and alloy steel line and structural pipe from the Republic of Korea (Korea). In addition, Commerce is amending its final affirmative determination. AGENCY: DATES: Applicable May 2, 2019. Sergio Balbontin at (202) 482–6478 or Janae Martin at (202) 482–0238, AD/ CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230. SUPPLEMENTARY INFORMATION: Background Estimated Number of Responses per Respondent: 17. Bette B. Brand, Administrator, Rural Business-Cooperative Service. International Trade Administration On February 27, 2019, Commerce published its affirmative final determination in the less-than-fair-value (LTFV) investigation of large diameter welded pipe from Korea.1 The scope of the investigation in Commerce’s final determination covered large diameter welded carbon and alloy steel line pipe (welded line pipe), large diameter welded carbon and alloy steel structural pipe (welded structural pipe), and stainless steel large diameter welded pipe (stainless steel pipe) from Korea.2 As discussed below, the ITC subsequently found three domestic like products covered by the scope of the investigation (welded line pipe, welded structural pipe, and stainless steel pipe) and, accordingly, made a separate injury determination with respect to each domestic like product. On April 15, 2019, the ITC notified Commerce of its final determination, pursuant to 735(d) of the Tariff Act of 1930, as amended (the Act), that an industry in the United States is materially injured within the 1 See Large Diameter Welded Pipe from the Republic of Korea: Final Determination of Sales at Less Than Fair Value, 84 FR 6374 (February 27, 2019) (Final Determination). 2 Id. VerDate Sep<11>2014 18:51 May 01, 2019 Jkt 247001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 18767 meaning of section 735(b)(1)(A)(i) of the Act, by reason of LTFV imports of welded line pipe and welded structural pipe from Korea.3 Additionally, the ITC made a negative determination of material injury or threat of material injury with respect to stainless steel pipe.4 Commerce released draft revised scope language for comment by parties.5 No party objected to the revised scope language in this proceeding. Scope of the Order The products covered by this order are welded line pipe and welded structural pipe from Korea. For a complete description of the scope of this order, see the Appendix to this notice. Amended Final Determination A ministerial error is defined as an error in addition, subtraction, or other arithmetic function, clerical error resulting from inaccurate copying, duplication, or the like, and any other similar type of unintentional error which the Secretary considers ministerial.6 Pursuant to section 735(e) of the Act and 19 CFR 351.224(e) and (f), Commerce is amending the Final Determination to reflect the correction of certain ministerial errors in the final estimated weighted average dumping margin calculated for SeAH Steel Corporation (SeAH). In addition, because SeAH’s estimated weighted average dumping margin is the basis for the estimated weighted average dumping margin determined for all other Korean producers and exporters of subject merchandise, we also are revising the ‘‘all-others’’ rate in the Final Determination.7 The amended estimated weighted average dumping margins are listed in the Suspension of Liquidation section below. 3 See ITC Notification Letter regarding ITC Investigation Nos. 701–TA–595–596 and 731–TA– 1401, 1403, 1405–1406, dated April 15, 2019 (ITC Notification); see also Large Diameter Welded Pipe from Canada, Greece, Korea, and Turkey; Determinations, 84 FR 16533 (April 19, 2019) (ITC Final Determination); and Large Diameter Welded Pipe from Canada, Greece, Korea, and Turkey, Investigation Nos. 701–TA–595–596 and 731–TA– 1401, 1403, 1405–1406 (Final), Publication 4883, April 2019 (Final ITC Report). 4 See ITC Notification. 5 See Memorandum, ‘‘Comments on the Scope of the Orders,’’ dated April 5, 2019. 6 See section 735(e) of the Act and 19 CFR 351.224(f). 7 See Memorandum, ‘‘Less-Than-Fair-Value Investigation of Large Diameter Welded Pipe from Korea: Ministerial Error Allegations in the Final Determination,’’ dated March 22, 2019. E:\FR\FM\02MYN1.SGM 02MYN1

Agencies

[Federal Register Volume 84, Number 85 (Thursday, May 2, 2019)]
[Notices]
[Pages 18766-18767]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-08935]


-----------------------------------------------------------------------

DEPARTMENT OF AGRICULTURE

Rural Business-Cooperative Service


Information Collection Activity; Comment Request

AGENCY: Rural Business-Cooperative Service, USDA.

ACTION: Notice; comment requested.

-----------------------------------------------------------------------

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, this 
notice announces the Rural Business-Cooperative Service's intention to 
request an extension for a currently approved information collection in 
support of the Rural Economic Development Loan and Grant Program.

DATES: Comments on this notice must be received by July 1, 2019, to be 
assured of consideration.

FOR FURTHER INFORMATION CONTACT: Thomas P. Dickson, Rural Development 
Innovation Center--Regulatory Team 2, USDA, 1400 Independence Avenue 
SW, STOP 1522, Room 4233, South Building, Washington, DC 20250-1522. 
Telephone: (202) 690-4492. Email [email protected].

SUPPLEMENTARY INFORMATION: The Office of Management and Budget's (OMB) 
regulation (5 CFR 1320) implementing provisions of the Paperwork 
Reduction Act of 1995 (Pub. L. 104-13) requires that interested members 
of the public and affected agencies have an opportunity to comment on 
information collection and recordkeeping activities (see 5 CFR 
1320.8(d)). This notice identifies an information collection that RBS 
is submitting to OMB for extension.
    Comments are invited on: (a) Whether the proposed collection of 
information is necessary for the proper performance of the functions of 
the Agency, including whether the information will have practical 
utility; (b) the accuracy of the Agency's estimate of the burden of the 
proposed collection of information including the validity of the 
methodology and assumptions used; (c) ways to enhance the quality, 
utility and clarity of the information to be collected; and (d) ways to 
minimize the burden of the collection of information on those who are 
to respond, including through the use of appropriate automated, 
electronic, mechanical, or other technological collection techniques or 
other forms of information technology.
    Comments may be sent by any of the following methods:
     Mail: Thomas P. Dickson, Rural Development Innovation 
Center, 1400 Independence Avenue SW, STOP 1522, Room 4233, South 
Building, Washington, DC 20250-1522. Telephone: (202) 690-4492. Email: 
[email protected].
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
    Title: Rural Economic Development Loan and Grant Program.
    OMB Number: 0570-0035.
    Type of Request: Revision of a currently approved information 
collection.
    Abstract: Under this program, loans and grants are provided to 
electric and telecommunications utilities that have borrowed funds from 
the Agency. The

[[Page 18767]]

purpose of the program is to encourage these electric and 
telecommunications utilities to promote rural economic development and 
job creation projects such as business start-up costs, business 
expansion, community development, and business incubator projects. The 
utilities must use program loan funds to make a pass-through loan to an 
ultimate recipient such as a business. The utility is responsible for 
fully repaying its loan to the Government, even if the ultimate 
recipient does not repay its loan. The intermediary must use program 
grant funds, along with its required contribution, to create a 
revolving loan fund that the utility will operate and administer. Loans 
to the ultimate recipient are made from the revolving loan fund for a 
variety of community development projects. The information requested is 
necessary and vital in order for the Agency to be able to make prudent 
and financial analysis decisions.
    Estimate of Burden: Public reporting burden for this collection of 
information is estimated to average 2 hours per response.
    Respondents: Rural Utilities Service Electric and 
Telecommunications Borrowers.
    Estimated Number of Respondents: 120.
    Estimated Number of Responses per Respondent: 17.
    Estimated Number of Responses: 2,180.
    Estimated Total Annual Burden on Respondents: 4,781.
    Copies of this information collection can be obtained from Robin M. 
Jones, Innovation Center, at (202) 772-1172, Email: 
[email protected].
    All responses to this notice will be summarized and included in the 
request for OMB approval. All comments will also become a matter of 
public record.

Bette B. Brand,
Administrator, Rural Business-Cooperative Service.
[FR Doc. 2019-08935 Filed 5-1-19; 8:45 am]
BILLING CODE 3410-XY-P