Surgical Staplers and Staples for Internal Use-Labeling Recommendations; Draft Guidance for Industry and Food and Drug Administration Staff; Availability, 17174-17176 [2019-08259]
Download as PDF
jbell on DSK30RV082PROD with NOTICES
17174
Federal Register / Vol. 84, No. 79 / Wednesday, April 24, 2019 / Notices
AdvisoryCommittees/AboutAdvisory
Committees/ucm408555.htm.
FOR FURTHER INFORMATION CONTACT:
Patricio Garcia, Center for Devices and
Radiological Health, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. G610, Silver Spring,
MD 20993, Patricio.garcia@fda.hhs.gov,
301–796–6875, or FDA Advisory
Committee Information Line, 1–800–
741–8138 (301–443–0572 in the
Washington, DC area). A notice in the
Federal Register about last minute
modifications that impact a previously
announced advisory committee meeting
cannot always be published quickly
enough to provide timely notice.
Therefore, you should always check the
Agency’s website at https://
www.fda.gov/AdvisoryCommittees/
default.htm and scroll down to the
appropriate advisory committee meeting
link, or call the advisory committee
information line to learn about possible
modifications before coming to the
meeting.
SUPPLEMENTARY INFORMATION:
Agenda: On May 30, 2019, the
committee will discuss and make
recommendations regarding the
reclassification of surgical stapler
devices for internal use from Class I
(general controls) to Class II (special
controls). On May 31, 2019, the
committee will discuss and make
recommendations regarding the
reclassification of certain absorbable
hemostatic agents from Class III to Class
II (special controls).
FDA intends to make background
material available to the public no later
than 2 business days before the meeting.
If FDA is unable to post the background
material on its website prior to the
meeting, the background material will
be made publicly available at the
location of the advisory committee
meeting, and the background material
will be posted on FDA’s website after
the meeting. Background material is
available at https://www.fda.gov/
AdvisoryCommittees/Committees
MeetingMaterials/default.htm. Scroll
down to the appropriate advisory
committee meeting link.
Procedure: Interested persons may
present data, information, or views,
orally or in writing, on issues pending
before the committee. Written
submissions may be made to the contact
person on or before May 20, 2019. Oral
presentations from the public will be
scheduled on May 30 and 31, 2019,
between approximately 1 p.m. and 2
p.m. Those individuals interested in
making formal oral presentations should
notify the contact person (see FOR
FURTHER INFORMATION CONTACT) and
VerDate Sep<11>2014
17:20 Apr 23, 2019
Jkt 247001
indicate which session they would like
to present. The notification should
include a brief statement of the general
nature of the evidence or arguments
they wish to present, the names and
addresses of proposed participants, and
an indication of the approximate time
requested to make their presentation on
or before May 10, 2019. Time allotted
for each presentation may be limited. If
the number of registrants requesting to
speak is greater than can be reasonably
accommodated during the scheduled
open public hearing session, FDA may
conduct a lottery to determine the
speakers for the scheduled open public
hearing sessions. The contact person
will notify interested persons regarding
their request to speak by May 13, 2019.
Persons attending FDA’s advisory
committee meetings are advised that the
Agency is not responsible for providing
access to electrical outlets.
FDA welcomes the attendance of the
public at its advisory committee
meetings and will make every effort to
accommodate persons with disabilities.
If you require accommodations due to a
disability, please contact AnnMarie
Williams at annmarie.williams@
fda.hhs.gov or 301–796–5966 at least 7
days in advance of the meeting.
FDA is committed to the orderly
conduct of its advisory committee
meetings. Please visit our website at
https://www.fda.gov/Advisory
Committees/AboutAdvisoryCommittees/
ucm111462.htm for procedures on
public conduct during advisory
committee meetings.
Notice of this meeting is given under
the Federal Advisory Committee Act (5
U.S.C. app. 2).
Dated: April 18, 2019.
Lowell J. Schiller,
Principal Associate Commissioner for Policy.
[FR Doc. 2019–08261 Filed 4–23–19; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2019–D–1262]
Surgical Staplers and Staples for
Internal Use—Labeling
Recommendations; Draft Guidance for
Industry and Food and Drug
Administration Staff; Availability
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice of availability.
The Food and Drug
Administration (FDA or Agency) is
SUMMARY:
PO 00000
Frm 00041
Fmt 4703
Sfmt 4703
announcing the availability of the draft
guidance entitled ‘‘Surgical Staplers and
Staples for Internal Use—Labeling
Recommendations.’’ FDA is issuing this
draft guidance to provide labeling
recommendations for surgical staplers
and staples for internal use. These
labeling recommendations are being
issued because malfunctions and misuse
associated with these devices have
resulted in serious adverse events,
including deaths. This draft guidance is
not final nor is it currently in effect.
DATES: Submit either electronic or
written comments on the draft guidance
by June 24, 2019 to ensure that the
Agency considers your comment on this
draft guidance before it begins work on
the final version of the guidance.
ADDRESSES: You may submit comments
on any guidance at any time as follows:
Electronic Submissions
Submit electronic comments in the
following way:
• Federal eRulemaking Portal:
https://www.regulations.gov. Follow the
instructions for submitting comments.
Comments submitted electronically,
including attachments, to https://
www.regulations.gov will be posted to
the docket unchanged. Because your
comment will be made public, you are
solely responsible for ensuring that your
comment does not include any
confidential information that you or a
third party may not wish to be posted,
such as medical information, your or
anyone else’s Social Security number, or
confidential business information, such
as a manufacturing process. Please note
that if you include your name, contact
information, or other information that
identifies you in the body of your
comments, that information will be
posted on https://www.regulations.gov.
• If you want to submit a comment
with confidential information that you
do not wish to be made available to the
public, submit the comment as a
written/paper submission and in the
manner detailed (see ‘‘Written/Paper
Submissions’’ and ‘‘Instructions’’).
Written/Paper Submissions
Submit written/paper submissions as
follows:
• Mail/Hand Delivery/Courier (for
written/paper submissions): Dockets
Management Staff (HFA–305), Food and
Drug Administration, 5630 Fishers
Lane, Rm. 1061, Rockville, MD 20852.
• For written/paper comments
submitted to the Dockets Management
Staff, FDA will post your comment, as
well as any attachments, except for
information submitted, marked and
identified, as confidential, if submitted
as detailed in ‘‘Instructions.’’
E:\FR\FM\24APN1.SGM
24APN1
17175
jbell on DSK30RV082PROD with NOTICES
Federal Register / Vol. 84, No. 79 / Wednesday, April 24, 2019 / Notices
Instructions: All submissions received
must include the Docket No. FDA–
2019–D–1262 for ‘‘Surgical Staplers and
Staples for Internal Use—Labeling
Recommendations.’’ Received
comments will be placed in the docket
and, except for those submitted as
‘‘Confidential Submissions,’’ publicly
viewable at https://www.regulations.gov
or at the Dockets Management Staff
between 9 a.m. and 4 p.m., Monday
through Friday.
• Confidential Submissions—To
submit a comment with confidential
information that you do not wish to be
made publicly available, submit your
comments only as a written/paper
submission. You should submit two
copies total. One copy will include the
information you claim to be confidential
with a heading or cover note that states
‘‘THIS DOCUMENT CONTAINS
CONFIDENTIAL INFORMATION.’’ The
Agency will review this copy, including
the claimed confidential information, in
its consideration of comments. The
second copy, which will have the
claimed confidential information
redacted/blacked out, will be available
for public viewing and posted on
https://www.regulations.gov. Submit
both copies to the Dockets Management
Staff. If you do not wish your name and
contact information to be made publicly
available, you can provide this
information on the cover sheet and not
in the body of your comments and you
must identify this information as
‘‘confidential.’’ Any information marked
as ‘‘confidential’’ will not be disclosed
except in accordance with 21 CFR 10.20
and other applicable disclosure law. For
more information about FDA’s posting
of comments to public dockets, see 80
FR 56469, September 18, 2015, or access
the information at: https://www.gpo.gov/
fdsys/pkg/FR-2015-09-18/pdf/201523389.pdf.
Docket: For access to the docket to
read background documents or the
electronic and written/paper comments
received, go to https://
www.regulations.gov and insert the
docket number, found in brackets in the
heading of this document, into the
‘‘Search’’ box and follow the prompts
and/or go to the Dockets Management
Staff, 5630 Fishers Lane, Rm. 1061,
Rockville, MD 20852.
You may submit comments on any
guidance at any time (see 21 CFR
10.115(g)(5)).
An electronic copy of the guidance
document is available for download
from the internet. See the
section for
information on electronic access to the
guidance. Submit written requests for a
single hard copy of the draft guidance
document entitled ‘‘Surgical Staplers
and Staples for Internal Use—Labeling
Recommendations’’ to the Office of
Policy, Guidance and Policy
Development, Center for Devices and
Radiological Health, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. 5431, Silver Spring,
MD 20993–0002. Send one selfaddressed adhesive label to assist that
office in processing your request.
FOR FURTHER INFORMATION CONTACT: R.
Dale Rimmer, Center for Devices and
Radiological Health, Food and Drug
Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. G425, Silver Spring,
MD 20993–0002, 240–402–4828.
SUPPLEMENTARY INFORMATION:
SUPPLEMENTARY INFORMATION
I. Background
FDA is announcing the availability of
a draft guidance for industry and FDA
staff entitled ‘‘Surgical Staplers and
Staples for Internal Use—Labeling
Recommendations.’’ Surgical staplers
for internal use are specialized
prescription devices used to deliver
compatible staples to internal tissues
during surgery for resection, transection,
and creating anastomoses. Surgical
staplers and staples for internal use may
be indicated for use in a wide range of
surgical applications, including but not
limited to gastrointestinal, gynecologic,
and thoracic surgery. FDA has become
aware of a large number of adverse
events associated with use of both
surgical staplers and staples for internal
use. Both device misuse and device
malfunctions are root causes of these
adverse events. FDA believes that these
problems may be mitigated by providing
specific information about the risks,
limitations, and directions for use in the
labeling for the surgical staplers and
staples for internal use.
The draft guidance, when finalized,
will provide recommendations for
information that should be included in
the product labeling for surgical staplers
and staples for internal use, including
contraindications, warnings, directions
for use, and technical characteristics
and performance parameters. Elsewhere
in this issue of the Federal Register,
FDA is announcing a proposed
reclassification of surgical staplers for
internal use from class I to class II with
special controls. If the reclassification is
finalized, some of the labeling
recommendations in this guidance may
be required as part of the special
controls for surgical staplers for internal
use. As such, FDA also intends to utilize
this draft guidance, when finalized, to
provide recommendations to help
manufacturers comply with any labeling
special controls identified in the final
reclassification order.
II. Significance of Guidance
This draft guidance is being issued
consistent with FDA’s good guidance
practices regulation (21 CFR 10.115).
The draft guidance, when finalized, will
represent the current thinking of FDA
on ‘‘Surgical Staplers and Staples for
Internal Use—Labeling
Recommendations.’’ It does not
establish any rights for any person and
is not binding on FDA or the public.
You can use an alternative approach if
it satisfies the requirements of the
applicable statutes and regulations. This
guidance is not subject to Executive
Order 12866.
III. Electronic Access
Persons interested in obtaining a copy
of the draft guidance may do so by
downloading an electronic copy from
the internet. A search capability for all
Center for Devices and Radiological
Health guidance documents is available
at https://www.fda.gov/MedicalDevices/
DeviceRegulationandGuidance/
GuidanceDocuments/default.htm. This
guidance document is also available at
https://www.regulations.gov. Persons
unable to download an electronic copy
of ‘‘Surgical Staplers and Staples for
Internal Use—Labeling
Recommendations’’ may send an email
request to CDRH-Guidance@fda.hhs.gov
to receive an electronic copy of the
document. Please use the document
number 18013 to identify the guidance
you are requesting.
IV. Paperwork Reduction Act of 1995
This draft guidance refers to
previously approved collections of
information. These collections of
information are subject to review by the
Office of Management and Budget
(OMB) under the Paperwork Reduction
Act of 1995 (44 U.S.C. 3501–3520). The
collections of information in the
following FDA regulations have been
approved by OMB as listed in the
following table:
21 CFR part
Topic
807, subpart E ........................................................................
Premarket Notification ............................................................
VerDate Sep<11>2014
17:20 Apr 23, 2019
Jkt 247001
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
E:\FR\FM\24APN1.SGM
OMB control No.
24APN1
0910–0120
17176
Federal Register / Vol. 84, No. 79 / Wednesday, April 24, 2019 / Notices
21 CFR part
Topic
801 ..........................................................................................
Medical Device Labeling Regulations ....................................
Dated: April 18, 2019.
Lowell J. Schiller,
Principal Associate Commissioner for Policy.
[FR Doc. 2019–08259 Filed 4–23–19; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2019–N–1468]
Characterizing the Food and Drug
Administration’s Approach to BenefitRisk Assessment Throughout the
Medical Product Life Cycle; Public
Meeting; Request for Comments
AGENCY:
Food and Drug Administration,
HHS.
Notice of public meeting;
request for comments.
ACTION:
The Food and Drug
Administration (FDA, the Agency, or
we) is announcing the following public
meeting entitled ‘‘Characterizing FDA’s
Approach to Benefit-Risk Assessment
Throughout the Medical Product Life
Cycle’’ and an opportunity for public
comment. The meeting will be
convened by Duke University’s Robert J.
Margolis, MD, Center for Health Policy
(Duke-Margolis) and supported by a
cooperative agreement with FDA. The
meeting is intended to gather industry,
patient, researcher, and other
stakeholder input on applying FDA’s
Benefit-Risk Framework throughout the
human drug lifecycle and best
approaches to communicating FDA’s
benefit-risk assessment. Input from this
meeting will support development of a
draft guidance on benefit-risk
assessment for new drugs and biologics
and result in a publicly available
summary report from Duke-Margolis.
This meeting is intended to meet an
FDA commitment included in the sixth
authorization of the Prescription Drug
User Fee Amendments of 2017 (PDUFA
VI).
DATES: The public meeting will be held
on May 16, 2019, from 9 a.m. to 5 p.m.
Submit either electronic or written
comments on this public meeting by
June 17, 2019. See the SUPPLEMENTARY
INFORMATION section for registration date
and information.
ADDRESSES: The public meeting will be
held at the Tommy Douglas Conference
Center, 10000 New Hampshire Ave.,
jbell on DSK30RV082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:20 Apr 23, 2019
Jkt 247001
Silver Spring, MD 20903. For
information on the public meeting
location please see https://
www.tommydouglascenter.com/.
You may submit comments as
follows. Please note that late, untimely
filed comments will not be considered.
Electronic comments must be submitted
on or before June 17, 2019. The https://
www.regulations.gov electronic filing
system will accept comments until
11:59 p.m. Eastern Time at the end of
June 17, 2019. Comments received by
mail/hand delivery/courier (for written/
paper submissions) will be considered
timely if they are postmarked or the
delivery service acceptance receipt is on
or before that date.
Electronic Submissions
Submit electronic comments in the
following way:
• Federal eRulemaking Portal:
https://www.regulations.gov. Follow the
instructions for submitting comments.
Comments submitted electronically,
including attachments, to https://
www.regulations.gov will be posted to
the docket unchanged. Because your
comment will be made public, you are
solely responsible for ensuring that your
comment does not include any
confidential information that you or a
third party may not wish to be posted,
such as medical information, your or
anyone else’s Social Security number, or
confidential business information, such
as a manufacturing process. Please note
that if you include your name, contact
information, or other information that
identifies you in the body of your
comments, that information will be
posted on https://www.regulations.gov.
• If you want to submit a comment
with confidential information that you
do not wish to be made available to the
public, submit the comment as a
written/paper submission and in the
manner detailed (see ‘‘Written/Paper
Submissions’’ and ‘‘Instructions’’).
Written/Paper Submissions
Submit written/paper submissions as
follows:
• Mail/Hand Delivery/Courier (for
written/paper submissions): Dockets
Management Staff (HFA–305), Food and
Drug Administration, 5630 Fishers
Lane, Rm. 1061, Rockville, MD 20852.
• For written/paper comments
submitted to the Dockets Management
Staff, FDA will post your comment, as
well as any attachments, except for
information submitted, marked and
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
OMB control No.
0910–0485
identified, as confidential, if submitted
as detailed in ‘‘Instructions.’’
Instructions: All submissions received
must include the Docket No. FDA–
2019–N–1468 for ‘‘Characterizing FDA’s
Approach to Benefit-Risk Assessment
Throughout the Medical Product Life
Cycle; Public Meeting; Request for
Comments.’’ Received comments, those
filed in a timely manner (see
ADDRESSES), will be placed in the docket
and, except for those submitted as
‘‘Confidential Submissions,’’ publicly
viewable at https://www.regulations.gov
or at the Dockets Management Staff
between 9 a.m. and 4 p.m., Monday
through Friday.
• Confidential Submissions—To
submit a comment with confidential
information that you do not wish to be
made publicly available, submit your
comments only as a written/paper
submission. You should submit two
copies total. One copy will include the
information you claim to be confidential
with a heading or cover note that states
‘‘THIS DOCUMENT CONTAINS
CONFIDENTIAL INFORMATION.’’ The
Agency will review this copy, including
the claimed confidential information, in
its consideration of comments. The
second copy, which will have the
claimed confidential information
redacted/blacked out, will be available
for public viewing and posted on
https://www.regulations.gov. Submit
both copies to the Dockets Management
Staff. If you do not wish your name and
contact information to be made publicly
available, you can provide this
information on the cover sheet and not
in the body of your comments and you
must identify this information as
‘‘confidential.’’ Any information marked
as ‘‘confidential’’ will not be disclosed
except in accordance with 21 CFR 10.20
and other applicable disclosure law. For
more information about FDA’s posting
of comments to public dockets, see 80
FR 56469, September 18, 2015, or access
the information at: https://www.gpo.gov/
fdsys/pkg/FR-2015-09-18/pdf/201523389.pdf.
Docket: For access to the docket to
read background documents or the
electronic and written/paper comments
received, go to https://
www.regulations.gov and insert the
docket number, found in brackets in the
heading of this document, into the
‘‘Search’’ box and follow the prompts
and/or go to the Dockets Management
E:\FR\FM\24APN1.SGM
24APN1
Agencies
[Federal Register Volume 84, Number 79 (Wednesday, April 24, 2019)]
[Notices]
[Pages 17174-17176]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-08259]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2019-D-1262]
Surgical Staplers and Staples for Internal Use--Labeling
Recommendations; Draft Guidance for Industry and Food and Drug
Administration Staff; Availability
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice of availability.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA or Agency) is announcing
the availability of the draft guidance entitled ``Surgical Staplers and
Staples for Internal Use--Labeling Recommendations.'' FDA is issuing
this draft guidance to provide labeling recommendations for surgical
staplers and staples for internal use. These labeling recommendations
are being issued because malfunctions and misuse associated with these
devices have resulted in serious adverse events, including deaths. This
draft guidance is not final nor is it currently in effect.
DATES: Submit either electronic or written comments on the draft
guidance by June 24, 2019 to ensure that the Agency considers your
comment on this draft guidance before it begins work on the final
version of the guidance.
ADDRESSES: You may submit comments on any guidance at any time as
follows:
Electronic Submissions
Submit electronic comments in the following way:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the instructions for submitting comments. Comments submitted
electronically, including attachments, to https://www.regulations.gov
will be posted to the docket unchanged. Because your comment will be
made public, you are solely responsible for ensuring that your comment
does not include any confidential information that you or a third party
may not wish to be posted, such as medical information, your or anyone
else's Social Security number, or confidential business information,
such as a manufacturing process. Please note that if you include your
name, contact information, or other information that identifies you in
the body of your comments, that information will be posted on https://www.regulations.gov.
If you want to submit a comment with confidential
information that you do not wish to be made available to the public,
submit the comment as a written/paper submission and in the manner
detailed (see ``Written/Paper Submissions'' and ``Instructions'').
Written/Paper Submissions
Submit written/paper submissions as follows:
Mail/Hand Delivery/Courier (for written/paper
submissions): Dockets Management Staff (HFA-305), Food and Drug
Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.
For written/paper comments submitted to the Dockets
Management Staff, FDA will post your comment, as well as any
attachments, except for information submitted, marked and identified,
as confidential, if submitted as detailed in ``Instructions.''
[[Page 17175]]
Instructions: All submissions received must include the Docket No.
FDA-2019-D-1262 for ``Surgical Staplers and Staples for Internal Use--
Labeling Recommendations.'' Received comments will be placed in the
docket and, except for those submitted as ``Confidential Submissions,''
publicly viewable at https://www.regulations.gov or at the Dockets
Management Staff between 9 a.m. and 4 p.m., Monday through Friday.
Confidential Submissions--To submit a comment with
confidential information that you do not wish to be made publicly
available, submit your comments only as a written/paper submission. You
should submit two copies total. One copy will include the information
you claim to be confidential with a heading or cover note that states
``THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION.'' The Agency will
review this copy, including the claimed confidential information, in
its consideration of comments. The second copy, which will have the
claimed confidential information redacted/blacked out, will be
available for public viewing and posted on https://www.regulations.gov.
Submit both copies to the Dockets Management Staff. If you do not wish
your name and contact information to be made publicly available, you
can provide this information on the cover sheet and not in the body of
your comments and you must identify this information as
``confidential.'' Any information marked as ``confidential'' will not
be disclosed except in accordance with 21 CFR 10.20 and other
applicable disclosure law. For more information about FDA's posting of
comments to public dockets, see 80 FR 56469, September 18, 2015, or
access the information at: https://www.gpo.gov/fdsys/pkg/FR-2015-09-18/pdf/2015-23389.pdf.
Docket: For access to the docket to read background documents or
the electronic and written/paper comments received, go to https://www.regulations.gov and insert the docket number, found in brackets in
the heading of this document, into the ``Search'' box and follow the
prompts and/or go to the Dockets Management Staff, 5630 Fishers Lane,
Rm. 1061, Rockville, MD 20852.
You may submit comments on any guidance at any time (see 21 CFR
10.115(g)(5)).
An electronic copy of the guidance document is available for
download from the internet. See the SUPPLEMENTARY INFORMATION section
for information on electronic access to the guidance. Submit written
requests for a single hard copy of the draft guidance document entitled
``Surgical Staplers and Staples for Internal Use--Labeling
Recommendations'' to the Office of Policy, Guidance and Policy
Development, Center for Devices and Radiological Health, Food and Drug
Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 5431, Silver
Spring, MD 20993-0002. Send one self-addressed adhesive label to assist
that office in processing your request.
FOR FURTHER INFORMATION CONTACT: R. Dale Rimmer, Center for Devices and
Radiological Health, Food and Drug Administration, 10903 New Hampshire
Ave., Bldg. 66, Rm. G425, Silver Spring, MD 20993-0002, 240-402-4828.
SUPPLEMENTARY INFORMATION:
I. Background
FDA is announcing the availability of a draft guidance for industry
and FDA staff entitled ``Surgical Staplers and Staples for Internal
Use--Labeling Recommendations.'' Surgical staplers for internal use are
specialized prescription devices used to deliver compatible staples to
internal tissues during surgery for resection, transection, and
creating anastomoses. Surgical staplers and staples for internal use
may be indicated for use in a wide range of surgical applications,
including but not limited to gastrointestinal, gynecologic, and
thoracic surgery. FDA has become aware of a large number of adverse
events associated with use of both surgical staplers and staples for
internal use. Both device misuse and device malfunctions are root
causes of these adverse events. FDA believes that these problems may be
mitigated by providing specific information about the risks,
limitations, and directions for use in the labeling for the surgical
staplers and staples for internal use.
The draft guidance, when finalized, will provide recommendations
for information that should be included in the product labeling for
surgical staplers and staples for internal use, including
contraindications, warnings, directions for use, and technical
characteristics and performance parameters. Elsewhere in this issue of
the Federal Register, FDA is announcing a proposed reclassification of
surgical staplers for internal use from class I to class II with
special controls. If the reclassification is finalized, some of the
labeling recommendations in this guidance may be required as part of
the special controls for surgical staplers for internal use. As such,
FDA also intends to utilize this draft guidance, when finalized, to
provide recommendations to help manufacturers comply with any labeling
special controls identified in the final reclassification order.
II. Significance of Guidance
This draft guidance is being issued consistent with FDA's good
guidance practices regulation (21 CFR 10.115). The draft guidance, when
finalized, will represent the current thinking of FDA on ``Surgical
Staplers and Staples for Internal Use--Labeling Recommendations.'' It
does not establish any rights for any person and is not binding on FDA
or the public. You can use an alternative approach if it satisfies the
requirements of the applicable statutes and regulations. This guidance
is not subject to Executive Order 12866.
III. Electronic Access
Persons interested in obtaining a copy of the draft guidance may do
so by downloading an electronic copy from the internet. A search
capability for all Center for Devices and Radiological Health guidance
documents is available at https://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/default.htm. This
guidance document is also available at https://www.regulations.gov.
Persons unable to download an electronic copy of ``Surgical Staplers
and Staples for Internal Use--Labeling Recommendations'' may send an
email request to [email protected] to receive an electronic
copy of the document. Please use the document number 18013 to identify
the guidance you are requesting.
IV. Paperwork Reduction Act of 1995
This draft guidance refers to previously approved collections of
information. These collections of information are subject to review by
the Office of Management and Budget (OMB) under the Paperwork Reduction
Act of 1995 (44 U.S.C. 3501-3520). The collections of information in
the following FDA regulations have been approved by OMB as listed in
the following table:
------------------------------------------------------------------------
21 CFR part Topic OMB control No.
------------------------------------------------------------------------
807, subpart E............... Premarket 0910-0120
Notification.
[[Page 17176]]
801.......................... Medical Device 0910-0485
Labeling Regulations.
------------------------------------------------------------------------
Dated: April 18, 2019.
Lowell J. Schiller,
Principal Associate Commissioner for Policy.
[FR Doc. 2019-08259 Filed 4-23-19; 8:45 am]
BILLING CODE 4164-01-P