Foreign-Trade Zone (FTZ) 238-Dublin, Virginia; Notification of Proposed Production Activity; EBI, LLC (Mattresses and Sofas), Danville, Virginia, 13632 [2019-06707]
Download as PDF
13632
Federal Register / Vol. 84, No. 66 / Friday, April 5, 2019 / Notices
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
Dated: April 1, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019–06705 Filed 4–4–19; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–07–2019]
khammond on DSKBBV9HB2PROD with NOTICES
Foreign-Trade Zone (FTZ) 238—Dublin,
Virginia; Notification of Proposed
Production Activity; EBI, LLC
(Mattresses and Sofas), Danville,
Virginia
The New River Valley Economic
Development Alliance, grantee of FTZ
238, submitted a notification of
proposed production activity to the FTZ
Board on behalf of EBI, LLC (EBI),
located in Danville, Virginia. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on April 1, 2019.
EBI is located within Subzone 238C.
The facility is used for production of
mattresses and sofas. Pursuant to 15
CFR 400.14(b), FTZ activity would be
limited to the specific foreign-status
materials and components and specific
finished products described in the
submitted notification (as described
below) and subsequently authorized by
the FTZ Board.
Production under FTZ procedures
could exempt EBI from customs duty
payments on the foreign-status
components used in export production.
On its domestic sales, for the foreignstatus materials/components noted
below, EBI would be able to choose the
duty rates during customs entry
procedures that apply to mattresses,
complete sofas, incomplete sofa
sections, and sofa cushions (duty-free to
6.0%). EBI would be able to avoid duty
on foreign-status components which
become scrap/waste. Customs duties
also could possibly be deferred or
reduced on foreign-status production
equipment.
VerDate Sep<11>2014
18:46 Apr 04, 2019
Jkt 247001
The components and materials
sourced from abroad include: Prepared
glues and adhesives; polyethylene
plastic film; cellular foam cushioning;
high resilience polyurethane foam;
polyamide/polyethylene sofa cushion
bags; medium density fiber boards; nonwoven polyester fiber wadding for
cushion covers; felt (100% polyester),
not impregnated, coated, covered, or
laminated; non-woven (100%
polypropylene) protective cover used as
packing material for shipping; mattress
handles (fastener fabric tape), woven, of
synthetic fibers; sofa bed box pullout
handles of woven polyester; cotton
woven mattress covers; synthetic fiber
woven mattress covers; non-woven
polypropylene dust covers for
mattresses; non-woven polypropylene
bags; spring mattress cores (inner
springs); sofa springs; zinc furniture
hinges; zinc furniture clips; zinc
furniture fittings; furniture staples of
base metal in strips; sofa covers, cut and
sewn, used for upholstery (leather;
imitation leather; 100% polyester; and,
75% polyester/25% cotton); completed
cotton mattress covers; and, upholstered
foam seat cushions (duty rate ranges
from duty-free to 9.3%). The request
indicates that certain materials/
components are subject to special duties
under Section 301 of the Trade Act of
1974 (Section 301), depending on the
country of origin. The applicable
Section 301 decisions require subject
merchandise to be admitted to FTZs in
privileged foreign status (19 CFR
146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is May
15, 2019.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
Dated: April 1, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019–06707 Filed 4–4–19; 8:45 am]
BILLING CODE 3510–DS–P
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–65–2018]
Foreign-Trade Zone (FTZ) 78—
Nashville, Tennessee; Authorization of
Production Activity; Calsonic Kansei
North America (Automotive Parts),
Shelbyville and Lewisburg, Tennessee
On October 23, 2018, Calsonic Kansei
North America submitted a notification
of proposed production activity to the
FTZ Board for its facilities within FTZ
78, in Shelbyville and Lewisburg,
Tennessee.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (83 FR 54710—54711,
October 31, 2018). On April 1, 2019, the
applicant was notified of the FTZ
Board’s decision that no further review
of the activity is warranted at this time.
The production activity described in the
notification was authorized, subject to
the FTZ Act and the FTZ Board’s
regulations, including Section 400.14.
Dated: April 1, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019–06708 Filed 4–4–19; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–201–838]
Seamless Refined Copper Pipe and
Tube From Mexico: Rescission of
Antidumping Duty Administrative
Review; 2017–2018
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) is rescinding the
administrative review of the
antidumping duty order on seamless
refined copper pipe and tube from
Mexico for the period November 1,
2017, through October 31, 2018.
DATES: Applicable April 5, 2019.
FOR FURTHER INFORMATION CONTACT:
Dennis McClure, AD/CVD Operations,
Office VIII, Enforcement and
Compliance, International Trade
Administration, U.S. Department of
Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone:
(202) 482–5973.
SUPPLEMENTARY INFORMATION:
AGENCY:
E:\FR\FM\05APN1.SGM
05APN1
Agencies
[Federal Register Volume 84, Number 66 (Friday, April 5, 2019)]
[Notices]
[Page 13632]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-06707]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-07-2019]
Foreign-Trade Zone (FTZ) 238--Dublin, Virginia; Notification of
Proposed Production Activity; EBI, LLC (Mattresses and Sofas),
Danville, Virginia
The New River Valley Economic Development Alliance, grantee of FTZ
238, submitted a notification of proposed production activity to the
FTZ Board on behalf of EBI, LLC (EBI), located in Danville, Virginia.
The notification conforming to the requirements of the regulations of
the FTZ Board (15 CFR 400.22) was received on April 1, 2019.
EBI is located within Subzone 238C. The facility is used for
production of mattresses and sofas. Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific foreign-status materials and
components and specific finished products described in the submitted
notification (as described below) and subsequently authorized by the
FTZ Board.
Production under FTZ procedures could exempt EBI from customs duty
payments on the foreign-status components used in export production. On
its domestic sales, for the foreign-status materials/components noted
below, EBI would be able to choose the duty rates during customs entry
procedures that apply to mattresses, complete sofas, incomplete sofa
sections, and sofa cushions (duty-free to 6.0%). EBI would be able to
avoid duty on foreign-status components which become scrap/waste.
Customs duties also could possibly be deferred or reduced on foreign-
status production equipment.
The components and materials sourced from abroad include: Prepared
glues and adhesives; polyethylene plastic film; cellular foam
cushioning; high resilience polyurethane foam; polyamide/polyethylene
sofa cushion bags; medium density fiber boards; non-woven polyester
fiber wadding for cushion covers; felt (100% polyester), not
impregnated, coated, covered, or laminated; non-woven (100%
polypropylene) protective cover used as packing material for shipping;
mattress handles (fastener fabric tape), woven, of synthetic fibers;
sofa bed box pullout handles of woven polyester; cotton woven mattress
covers; synthetic fiber woven mattress covers; non-woven polypropylene
dust covers for mattresses; non-woven polypropylene bags; spring
mattress cores (inner springs); sofa springs; zinc furniture hinges;
zinc furniture clips; zinc furniture fittings; furniture staples of
base metal in strips; sofa covers, cut and sewn, used for upholstery
(leather; imitation leather; 100% polyester; and, 75% polyester/25%
cotton); completed cotton mattress covers; and, upholstered foam seat
cushions (duty rate ranges from duty-free to 9.3%). The request
indicates that certain materials/components are subject to special
duties under Section 301 of the Trade Act of 1974 (Section 301),
depending on the country of origin. The applicable Section 301
decisions require subject merchandise to be admitted to FTZs in
privileged foreign status (19 CFR 146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is May 15, 2019.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
Board's website, which is accessible via www.trade.gov/ftz.
For further information, contact Juanita Chen at
[email protected] or 202-482-1378.
Dated: April 1, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019-06707 Filed 4-4-19; 8:45 am]
BILLING CODE 3510-DS-P