Certain New Chemicals; Receipt and Status Information for October 2018, 13287-13293 [2019-06557]
Download as PDF
<![CDATA[
jbell on DSK30RV082PROD with NOTICES
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
operation, and special arrangements
should be made for deliveries of boxed
information. If you provide comments
by mail or hand delivery, please submit
three copies of the comments. For
attachments, provide an index, number
pages consecutively with the comments,
and submit an unbound original and
three copies.
Instructions: Direct your comments to
Docket ID No. EPA–HQ–ORD–2018–
0655 for Methylmercury. Please ensure
that your comments are submitted
within the specified comment period.
Comments received after the closing
date will be marked ‘‘late,’’ and may
only be considered if time permits. It is
EPA’s policy to include all comments it
receives in the public docket without
change and to make the comments
available online at www.regulations.gov,
including any personal information
provided, unless a comment includes
information claimed to be Confidential
Business Information (CBI) or other
information for which disclosure is
restricted by statute. Do not submit
information through
www.regulations.gov or email that you
consider to be CBI or otherwise
protected. The www.regulations.gov
website is an ‘‘anonymous access’’
system, which means EPA will not
know your identity or contact
information unless you provide it in the
body of your comment. If you send an
email comment directly to EPA without
going through www.regulations.gov,
your email address will be
automatically captured and included as
part of the comment that is placed in the
public docket and made available on the
internet. If you submit an electronic
comment, EPA recommends that you
include your name and other contact
information in the body of your
comment and with any disk or CD–ROM
you submit. If EPA cannot read your
comment due to technical difficulties
and cannot contact you for clarification,
EPA may not be able to consider your
comment. Electronic files should avoid
the use of special characters, any form
of encryption, and be free of any defects
or viruses. For additional information
about EPA’s public docket visit the EPA
Docket Center homepage at
www.epa.gov/epahome/dockets.htm.
Docket: Documents in the docket are
listed in the www.regulations.gov index.
Although listed in the index, some
information is not publicly available,
e.g., CBI or other information whose
disclosure is restricted by statute.
Certain other materials, such as
copyrighted material, are publicly
available only in hard copy. Publicly
available docket materials are available
either electronically in
VerDate Sep<11>2014
17:25 Apr 03, 2019
Jkt 247001
www.regulations.gov or in hard copy at
the ORD Docket in the EPA
Headquarters Docket Center.
Dated: March 26, 2019.
Mary Ross,
Deputy Director, National Center for
Environmental Assessment.
[FR Doc. 2019–06617 Filed 4–3–19; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2018–0409; FRL–9990–57]
Certain New Chemicals; Receipt and
Status Information for October 2018
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 10/01/2018 to
10/31/2018.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
May 6, 2019.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2018–0409,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
SUMMARY:
PO 00000
Frm 00045
Fmt 4703
Sfmt 4703
13287
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
10/01/2018 to 10/31/2018. The Agency
is providing notice of receipt of PMNs,
SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the TSCA, 15 U.S.C. 2601 et
seq., a chemical substance may be either
an ‘‘existing’’ chemical substance or a
E:\FR\FM\04APN1.SGM
04APN1
13288
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995 (60 FR
25798) (FRL–4942–7). Since the passage
of the Lautenberg amendments to TSCA
in 2016, public interest in information
on the status of section 5 cases under
EPA review and, in particular, the final
determination of such cases, has
increased. In an effort to be responsive
to the regulated community, the users of
this information, and the general public,
to comply with the requirements of
TSCA, to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received
by EPA during this period, Table I
provides the following information (to
the extent that such information is not
subject to a CBI claim) on the notices
received by EPA during this period: The
EPA case number assigned to the notice
that indicates whether the submission is
an initial submission, or an amendment,
a notation of which version was
received, the date the notice was
received by EPA, the submitting
manufacturer (i.e., domestic producer or
importer), the potential uses identified
by the manufacturer in the notice, and
the chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
jbell on DSK30RV082PROD with NOTICES
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 10/01/2018 TO 10/31/2018
Case No.
Received
date
Version
Manufacturer
Use
(S) Used to produce enzymes which will be
used to saccharify agricultural waste to
simple sugars.
(G) Used for the manufacture of a chemical.
J–19–0001 ..............
2
10/5/2018
Xyleco .......................
J–19–0002 ..............
1
10/5/2018
CBI ...........................
VerDate Sep<11>2014
17:25 Apr 03, 2019
Jkt 247001
PO 00000
Frm 00046
Fmt 4703
Sfmt 4703
E:\FR\FM\04APN1.SGM
Chemical substance
(S) Trichoderma reesei 3AX3-9.
(G) Genetically modified microorganism.
04APN1
13289
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 10/01/2018 TO 10/31/2018—Continued
jbell on DSK30RV082PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
J–19–0003 ..............
1
10/5/2018
CBI ...........................
J–19–0004 ..............
1
10/5/2018
CBI ...........................
P–18–0235A ...........
5
10/3/2018
CBI ...........................
P–18–0309 .............
7
10/19/2018
Highland Logistics,
LLC.
(G) Used for the manufacture of a chemical.
(G) Used for the manufacture of a chemical.
(S) Component in automotive gasoline/
transportation fuel for consumer use.
(G) Latex applied to textiles for anti-odor
and anti-microbial applications.
P–18–0341 .............
2
10/11/2018
CBI ...........................
(G) Component in coatings .........................
P–18–0342 .............
2
10/11/2018
CBI ...........................
(G) Component in coatings .........................
P–18–0343 .............
2
10/11/2018
CBI ...........................
(G) Component in coatings .........................
P–18–0344 .............
2
10/11/2018
CBI ...........................
(G) Component in coatings .........................
P–18–0365 .............
3
10/30/2018
CBI ...........................
P–18–0366 .............
3
10/30/2018
CBI ...........................
(G) Superabsorbent polymer; (S) Manufacture for export only.
(G) Superabsorbent polymer; (S) Manufacture for export only.
P–18–0368 .............
2
10/15/2018
CBI ...........................
(G) Surfactant; (G) Protectant .....................
P–18–0372 .............
2
10/10/2018
Hexion Inc ................
P–18–0373 .............
2
10/10/2018
Hexion Inc ................
P–18–0374 .............
3
10/18/2018
Evonik Corporation ...
P–18–0375 .............
3
10/10/2018
Pulcra Chemicals,
LLC.
P–18–0376 .............
1
10/10/2018
P–18–0378 .............
2
10/4/2018
Sumitomo Chemical
Advanced Technologies, LLC.
CBI ...........................
(G) Polyol; (S) Reactive modifier for Carbon; (S) Reactive modifier for Fiber
bonding; (S) Reactive modifier for Friction; (S) Reactive modifier for Coated
abrasives; (S) Reactive modifier for
Glass Inserts; (S) Reactive Modifier for
Refractory; (S) Reactive modifier for
Bonded abrasives; (S) Reactive polyol
for Sealants; (S) Reactive polyol for Adhesives; (S) Reactive polyol for 1 part
coatings; (S) Reactive polyol for 2 part
coatings; (S) Reactive polyol for composites; (G) Polyol.
(G) Polyol; (S) Reactive modifier for carbon; (S) Reactive modifier for friction; (S)
Reactive modifier for fiber bonding; (S)
Reactive modifier for coated abrasives;
(S) Reactive modifier for glass inserts;
(S) Reactive modifier for refractory; (S)
Reactive modifier for bonded abrasives;
(S) Reactive polyol for sealants; (S) Reactive polyol for adhesives; (S) Reactive
polyol for 1-part coatings; (S) Reactive
polyol for 2-part coatings; (S) Reactive
polyol for composites; (G) Polyol.
(S) Additive in a water-borne coating formulation; (S) Glass fiber sizing; (S)
Fillers, pigments and glass bead treatment.
(S) The PMN substance will be imported
as part of an aqueous emulsion containing about 10 to 25 percent PMN substance with lubricant oils, nonionic
surfactants and anionic surfactants. The
emulsion will be used in the fat liquoring
stage in the production of leather.
(S) Substance used to improve physical
properties in rubber products.
P–18–0380 .............
P–18–0392 .............
3
4
10/12/2018
10/15/2018
CBI ...........................
CBI ...........................
VerDate Sep<11>2014
17:25 Apr 03, 2019
Jkt 247001
PO 00000
Frm 00047
(G) Industrial coatings additive ...................
(G) Automotive brake parts (contained use)
(G) Intermediate chemical ...........................
Fmt 4703
Sfmt 4703
E:\FR\FM\04APN1.SGM
Chemical substance
(G) Genetically modified microorganism.
(G) Genetically modified microorganism.
(G) Naphtha Oils.
(G) alkanedioic acid, 2-alkylene-, polymer
with polyhaloaromatic arylate, sodium
salt, hydroxyalkyl alkanoate, alkanoic
acid, alkenyl-hydroxypoly(oxy-1,2ethanediyl-alkenyloxymethylalkyoxy
polyoxy-1,2-ethandiyl.
(G) Alkane dicarboxylic acid, polymer with
alkoxylated polyalcohol, alkyl polyglycol,
alkyl dialcohol, and functionalized carboxylic acid.
(G) Alkane dicarboxylic acid, polymer with
alkyl polyglycol, alkyl dialcohol, and
functionalized carboxylic acid.
(G) Alkane dicarboxylic acid, polymer with
alkoxylated polyalcohol, and alkyl
dialcohol, (hydroxy alkyl) ester.
(G) Aromatic dicarboxylic acid, polymer
with alkane dicarboxylic acid, alkoxylated
polyalcohol, and alkyl dialcohol.
(G) Starch, carboxymethyl ether, sodium
salt, polymer with polycarboxylic acid.
(G) Starch, carboxymethyl ether, sodium
salt, polymer with mixed polycarboxylic
acids.
(G) Polyfluoroalkanesulfonamido-(hydroxyethyl)-, phosphate ester compounds,
amine salts.
(G) Formaldehyde, polymer with phenol
and heteroatom-substituted
heteromonocycle, reaction products with
1,3-dioxolan-2-one and 4-methyl-1,3dioxolan-2-one.
(G) Formaldehyde, polymer with 2methyloxirane, oxirane, phenol and
heteroatom-substituted heteromonocycle.
(G) Cationic aminomodified
alkylpolysiloxane.
(S) Fats and Glyceridic oils, vegetable, sulfonated, sodium salts.
(G) Thiosulfuric acid, aminoalkyl ester.
(G) Acrylic and Methacrylic acids and
esters, polymer with alkenylimidazole,
alkyl polyalkylene glycol,
alkenylbenzene, alkylbenzeneperoxoic
acid ester initiated, compds. with
Dialkylaminoalkanol.
(G) Butanoic acid ethyl amine.
(G) Heteromonocycle, alkenyl alkyl.
04APN1
13290
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 10/01/2018 TO 10/31/2018—Continued
jbell on DSK30RV082PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) The substance is part of a mixture with
other amines to act as a curative for a 2part epoxy formulation. The intended use
is the manufacture of wind turbine
blades. During manufacture of the
blades this substance forms part of the
in-mold coating system which is applied
to the blade mold and further laminated
with glass (or carbon) reinforced fibres
(GRP). The manufactured structure is
then ‘cured’ using heat and a chemical
reaction occurs forming a solid composite structure.
(S) The substance is part of a mixture with
other amines to act as a curative for a 2part epoxy formulation. The intended use
is the manufacture of wind turbine
blades. During manufacture of the
blades this substance forms part of the
in-mold coating system which is applied
to the blade mold and further laminated
with glass (or carbon) reinforced fibres
(GRP). The manufactured structure is
then ‘cured’ using heat and a chemical
reaction occurs forming a solid composite structure.
(G) Filler for plastic .....................................
(G) alkylmultiheteroatom,2functionalisedalkyl-2-hydroxyalkyl-, polymer with alkylheteroatommultialkylfunctionalised
carbomonocyleheteroatom and
multiglycidylether difunctionalised
polyalkylene glycol.
P–18–0404 .............
2
10/19/2018
Gurit (USA), Inc ........
P–18–0404A ...........
3
10/30/2018
Gurit (USA), Inc ........
P–19–0001 .............
2
10/1/2018
P–19–0002 .............
3
10/10/2018
Burgess Pigment
Company.
CBI ...........................
P–19–0003 .............
2
10/19/2018
P–19–0004 .............
2
10/19/2018
P–19–0005 .............
1
10/2/2018
CBI ...........................
P–19–0006 .............
1
10/9/2018
CBI ...........................
P–19–0007 .............
1
10/16/2018
Allnex USA, Inc ........
P–19–0007A ...........
2
10/25/2018
Allnex USA, Inc ........
P–19–0008 .............
1
10/22/2018
Allnex USA, Inc ........
P–19–0009 .............
1
10/23/2018
Allnex USA, Inc ........
P–19–0010 .............
1
10/29/2018
Ashland, Inc ..............
VerDate Sep<11>2014
17:25 Apr 03, 2019
Jkt 247001
Sabic Innovative
Plastics US, LLC.
Sabic Innovative
Plastics US, LLC.
PO 00000
Frm 00048
(G) alkylmultiheteroatom,2functionalisedalkyl-2-hydroxyalkyl-, polymer with alkylheteroatommultialkylfunctionalised
carbomonocyleheteroatom and
multiglycidylether difunctionalised
polyalkylene glycol.
(G) Aluminum silicate clay treated with siloxane (vinyl functionality).
(S) Chemical Intermediate .......................... (G) Polyaromatic symmetrical
tetracarboxylic acid.
(S) Chemical Intermediate .......................... (G) Polyaromatic ether symmetrical
dicarboxylic anhydride.
(G) Molded parts and components ............. (G) Aromatic dianhydride, polymer with aromatic diamine and heteroatom bridged
aromatic diamine, reaction products with
aromatic anhydride.
(S) Adhesive for automotive parts .............. (G) Phenol-formaldehyde epoxy, polymer
with an alkyl polyether polysulfide.
(G) Open, non-dispersive use ..................... (G) Diisocyanate polymer blocked with
alkoxyamine.
(S) Coating resin binder .............................. (G) Alkenoic acid, alkyl-, hydroxyalkyl
ester, polymer with alkyl-alkenoate,
alkenylcarbomonocycle, hydroxyalkylalkenoate, alkyl substituted alkenoate,
heteromonocycle and alkenoic acid,
alkylperoxoate-initiated.
(S) Coating resin binder .............................. (G) Alkenoic acid, alkyl-, hydroxyalkyl
ester, polymer with alkyl-alkenoate,
alkenylcarbomonocycle, hydroxyalkylalkenoate, alkyl substituted alkenoate,
heteromonocycle and alkenoic acid,
alkylperoxoate-initiated.
(S) The PMN substance is an isolated in(G) Substitued
termediate incorporated as a component
polyalkylenepolycarbomonocycle ester,
in several allnex coating resin products
polymer with dialkanolamine,
used as additives for corrosion protection.
(hydroxyalkoxy)carbonyl] derivs.,
(alkoxyalkoxy) alkanol-blocked.
(S) The PMN substance is used as a coat- (G) Carbonmonocycles, polymer with
ing resin additive for corrosion protection.
haloalkyl substituted heteromonocycle
and hydro-hydroxypoly[oxy(alkylalkanediyl)], dialkyl-alkanediamine-terminated, hydroxyalkylated, acetates (salts).
(G) Adhesive ............................................... (G) Hydrogenated fatty acid dimers, polymers with 1,1′-methylenebis[4isocyanatobenzene], polypropylene glycol, polypropylene glycol ether with
trimethylolpropane (3:1), and 1,3propanediol, propylene glycol
monomethacrylate-blocked.
Fmt 4703
Sfmt 4703
E:\FR\FM\04APN1.SGM
04APN1
13291
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 10/01/2018 TO 10/31/2018—Continued
Case No.
Received
date
Version
SN–18–0016 ...........
2
10/10/2018
In Table II. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs received by EPA
during this period: The EPA case
Manufacturer
Use
Hexion Inc ................
(S) Reactive modifier for glass inserts; (S)
Reactive modifier for refractory; (S) Reactive modifier for bonded abrasives; (S)
Reactive polyol for sealants; (S) Reactive polyol for adhesives; (S) Reactive
polyol for 1 part coatings; (S) Reactive
polyol for 2 part coatings; (S) Reactive
polyol for composites; (G) Reactive polymer; (G) Reactive polymer; (S) Reactive
modifier for carbon (powder EPF); (S)
Reactive modifier for carbon (liquid
EPF); (S) Reactive modifier for fiber
bonding; (S) Reactive modifier for friction; (S) Reactive modifier for coated
abrasives.
number assigned to the NOC including
whether the submission was an initial
or amended submission, the date the
NOC was received by EPA, the date of
commencement provided by the
Chemical substance
(G) Modified phenol-formaldehyde resin.
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS RECEIVED FROM 10/01/2018 TO 10/31/2018
Received date
Commencement
date
If amendment, type
of amendment
Chemical substance
J–18–0006 ........
10/24/2018
09/25/2018
................................
J–18–0008 ........
10/15/2018
09/12/2018
................................
P–11–0432A .....
10/02/2018
09/10/2018
P–13–0071 ........
P–14–0092 ........
P–15–0353 ........
10/29/2018
10/29/2018
10/05/2018
10/01/2018
10/01/2018
09/27/2018
The chemical name
and CASRN submitted were not
in agreement
with the original
PMN submission
(P–110432).
................................
................................
................................
(G) Biofuel-producing modified microorganism(s), with
chromosomally-borne modifications.
(G) Biofuel-producing modified microorganism(s), with
chromosomally-borne modifications.
(S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14-triol, 1,3,5,7,9,11,14heptakis(2,4,4-trimethylpentyl)-.
P–15–0437 ........
P–16–0207 ........
P–16–0483 ........
10/16/2018
10/18/2018
10/23/2018
10/12/2018
09/12/2018
10/17/2018
................................
................................
................................
P–17–0007A .....
10/08/2018
09/20/2018
P–17–0207 ........
10/04/2018
09/17/2018
Updated generic
name.
................................
P–17–0329 ........
P–17–0334 ........
P–18–0040 ........
10/30/2018
10/04/2018
10/11/2018
10/26/2018
09/28/2018
10/10/2018
................................
................................
................................
P–18–0042 ........
10/09/2018
10/05/2018
................................
P–18–0100 ........
10/11/2018
10/09/2018
................................
jbell on DSK30RV082PROD with NOTICES
Case No.
VerDate Sep<11>2014
17:25 Apr 03, 2019
Jkt 247001
PO 00000
Frm 00049
Fmt 4703
(G) Fatty acid amide chlorides.
(G) Fatty acid amide chloride.
(S) Fatty acids, c16 and c18-unsaturated, methyl esters,
chlorinated.
(G) Flexible polyurethane methacrylate resin.
(G) Spiro tetrafluoroborate.
(G) Inorganic acids, metal salts, cmpds with modified
hetereoaromatic casrn.
(G) Dialkyl 7,10-dioxa, dithiahexadeca diene.
(G) 2-alkenoic acid, 2-alkyl-, 2-alkyl ester, polymer with alkyl 2alkenoate, vinyl carbomonocyle, substituted alkyl 2-alkyl-2alkenoate and alkyl 2-alkyl-2-alkenoate, tertiary alkyl peroxideinitiated.
(S) Ethanone, 1-[4-(4-chlorophenoxy)-2-(trifluoromethyl)phenyl]-.
(S) Benzamide, 2-(trifluoromethyl)-.
(G) Alkanedioic acid, polymers with alkanoic acid-dipentaerythritol
reaction products, substituted alkanedioc acid, substituted
alkanoic acid, isocyanato-(isocyanatoalkyl)-alkyl substituted
carbomoncycle and alkyl substituted alkanediol.
(S) 2,5-furandione, polymer with 2-ethyl-2-(hydroxymethyl)-1,3propanediol, 3a,4,5,6,7,7a-hexahydro-4,7-methano-1h-inden5(or 6)-yl ester, ester with 2,3-dihydroxypropyl neodecanoate,
polymer with 5-isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane, 2-hydroxyethyl acrylate- and 2-hydroxyethyl methacrylate-blocked.
(G) Substituted alkanoic acid, polymer with alkylcarbonate,
alkanediols and isocyanate substituted carbomonocycles, sodium salt, alkenoic acid substituted polyol reaction productsblocked.
Sfmt 4703
E:\FR\FM\04APN1.SGM
04APN1
13292
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
In Table III. of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information received
by EPA during this time period: The
EPA case number assigned to the test
information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 10/01/2018 TO 10/31/2018
jbell on DSK30RV082PROD with NOTICES
Case No.
Received date
Type of test information
Chemical substance
P–87–1436 ........
10/3/2018
P–18–0300 ........
10/8/2018
P–18–0051 ........
10/11/2018
P–18–0126 ........
10/12/2018
SN–18–0013 .....
P–18–0270–
0271.
10/15/2018
10/18/2018
P–15–0054 ........
10/24/2018
P–16–0543 ........
P–18–0309 ........
10/24/2018
10/26/2018
Activated Sludge, Respiration Inhibition Test (Carbon
and Ammonium Oxidation) (OECD 209), Algae
Growth Inhibition Study in Pseudokirchneriella
subcapitata (OECD 201), 48-hour Acute Immobilization Study in Daphnia magna (OECD 202).
Particle Size Distribution .............................................
Algae Acute Toxicity (OCSPP 850.5400), Daphnia
Acute Toxicity (OCSPP 850.1010, Fish Acute Toxicity (OCSPP 850.1075), Algae Acute Toxicity
(OCSPP 850.5400), Daphnia Acute Toxicity
(OCSPP 850.1010), Fish Acute Toxicity (OCSPP
850.1075).
Physical Chemistry Data (Year 3 Reporting): ............
• TEM, SEM, AFM Raman
• XPS ICP ESD
• XRD Zeta Potential
Exposure Monitoring Report (September 27) ............
Skin Irritation (OECD 404) ..........................................
P–17–0187 ........
10/26/2018
Skin Irritation (OECD 404) ..........................................
VerDate Sep<11>2014
17:25 Apr 03, 2019
QSAR Assessment Report on Vinyl Laurate; Skin
Sensitization: Local Lymph Node Assay (OECD
TG 429); Repeated Dose 90-Day Oral Toxicity in
Rodents (OECD TG 408); Repeated Dose Toxicity
and Repro/Devel Toxicity Screening (OECD TG
422); Chromosome Aberration Test (OECD TG
473); Gene Mutation Assay (OECD TG 476);
Micronucleus Test (OECD TG 474); Prenatal Developmental Toxicity Study (OECD TG 414);
Aquatic Toxicity—Daphnia (OECD TG 202);
Aquatic Toxicity—Daphnia Reproductive (OECD
TG 211); Aquatic Toxicity—Algal Growth (OECD
TG 201); Ready Biodegradability (OECD TG 301);
Dermal Irritation/Corrosion (OECD TG 404); Bacterial Reverse Mutation Assay—Ames Test
(OECD 471); Fish Acute Toxicity (OECD TG 203);
Activated Sludge Test (OECD TG 209); Acute
Oral Toxicity (OECD TG 401); Acute Eye Irritation
(OECD TG 405); Acute Dermal Toxicity (OECD
TG 402), Site WWT Discharge Permit, Flow Chart
of the existing Calvert City Waste Water process
system.
Activated Sludge (ISO 18749), Acute Oral Toxicity
(OECD 423), AMES Test (OECD 471), Skin Sensitization-Buehler Test (OECD 406), Ready
Biodegradability (OECD 301A).
Hydrolysis as a Function of pH ..................................
Jkt 247001
PO 00000
Frm 00050
Fmt 4703
Sfmt 4703
(S) Dodecanoic acid, ethenyl ester.
(G) Heteromonocycle, alkenoic 1:1 salt, polymer with
alpha-(2-methyl-1-oxo-2-propen-1-y)lomegamethoxypoly(oxy-1,2-ethanediyl) and
ethylalkenoic acid.
(G) Alkenoic acid, reaction products with
[Oxybis(alkylene)]bis[(substituted alkyl)-alkanediol],
polymers with isocyanatoalkane and substituted
alkanoic acid, substituted monoacrylate alkanoateblocked.
(S) Calcium manganese titanium oxide.
(G) Lithiated metal oxide.
(G) Ethanol, 2-butoxy-, 1,1′-ester
(G) 2-Propanol, 1-butoxy-, 2,2′-ester.
(S) Carbon Nanotube.
(G) halogenophosphoric acid metal salt.
(G) alkanedioic acid, 2-alkylene-, polymer with
polyhaloaromatic arylate, sodium salt, hydroxyalkyl
alkanoate, alkanoic acid, alkenyl-hydroxypoly(oxy1,2-ethanediyl-alkenyloxymethylalkyoxy polyoxy1,2-ethandiyl.
(G) Polymer with benzoic acid tetra halogen hydroxy
tetrahalogen oxo H xanthenyl alkenylaryl alkyl
ester alkalai metal salt, butyl-2-propenoate, ethenyl neodecanoate, methyl-2-methyl-2propenoate and 2-methyl-2-propenoic acid.
E:\FR\FM\04APN1.SGM
04APN1
Federal Register / Vol. 84, No. 65 / Thursday, April 4, 2019 / Notices
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 19, 2019.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2019–06557 Filed 4–3–19; 8:45 am]
BILLING CODE 6560–50–P
Tuesday, April 9, 2019
at 10:00 a.m. and its continuation at the
conclusion of the open meeting on April
11, 2019.
PLACE: 1050 First Street NE,
Washington, DC.
STATUS: This meeting will be closed to
the public.
MATTERS TO BE CONSIDERED:
Compliance matters pursuant to 52
U.S.C. 30109.
Matters relating to internal personnel
decisions, or internal rules and
practices.
Matters concerning participation in
civil actions or proceedings or
arbitration.
*
*
*
*
*
CONTACT PERSON FOR MORE INFORMATION:
Judith Ingram, Press Officer, Telephone:
(202) 694–1220.
TIME AND DATE:
Laura E. Sinram,
Deputy Secretary of the Commission.
[FR Doc. 2019–06779 Filed 4–2–19; 4:15 pm]
BILLING CODE 6715–01–P
FEDERAL MINE SAFETY AND HEALTH
REVIEW COMMISSION
Sunshine Act Notice
April 2, 2019.
10:00 a.m., Thursday,
April 18, 2019.
PLACE: The Richard V. Backley Hearing
Room, Room 511N, 1331 Pennsylvania
Avenue NW, Washington, DC 20004
(enter from F Street entrance).
STATUS: Open.
MATTERS TO BE CONSIDERED: The
Commission will consider and act upon
the following in open session: Secretary
of Labor v. M-Class Mining, LLC, Docket
No. LAKE 2012–519. (Issues include
jbell on DSK30RV082PROD with NOTICES
17:25 Apr 03, 2019
Jkt 247001
Emogene Johnson (202) 434–9935/(202)
708–9300 for TDD Relay/1–800–877–
8339 for toll free.
678–100.
Sunshine Act Meeting
VerDate Sep<11>2014
CONTACT PERSON FOR MORE INFO:
PHONE NUMBER FOR LISTENING TO
MEETING: 1 (866) 867–4769. Passcode:
FEDERAL ELECTION COMMISSION
TIME AND DATE:
whether the Judge erred by ruling that
a miner was not required to wear gloves
while troubleshooting an energized
continuous mining machine.)
Any person attending this meeting
who requires special accessibility
features and/or auxiliary aids, such as
sign language interpreters, must inform
the Commission in advance of those
needs. Subject to 29 CFR 2706.150(a)(3)
and 2706.160(d).
Sarah L. Stewart,
Deputy General Counsel.
[FR Doc. 2019–06787 Filed 4–2–19; 4:15 pm]
BILLING CODE 6735–01–P
FEDERAL RESERVE SYSTEM
Change in Bank Control Notices;
Acquisitions of Shares of a Bank or
Bank Holding Company
The notificants listed below have
applied under the Change in Bank
Control Act (‘‘Act’’) (12 U.S.C. 1817(j))
and § 225.41 of the Board’s Regulation
Y (12 CFR 225.41) to acquire shares of
a bank or bank holding company. The
factors that are considered in acting on
the notices are set forth in paragraph 7
of the Act (12 U.S.C. 1817(j)(7)).
The notices are available for
immediate inspection at the Federal
Reserve Bank indicated. The notices
also will be available for inspection at
the offices of the Board of Governors.
Interested persons may express their
views in writing to the Reserve Bank
indicated for that notice or to the offices
of the Board of Governors. Comments
must be received not later than April 19,
2019.
A. Federal Reserve Bank of Dallas
(Robert L. Triplett III, Senior Vice
President) 2200 North Pearl Street,
Dallas, Texas 75201–2272:
1. Lone Star State Bancshares, Inc.
and Subsidiaries Employee Stock
Ownership Plan, Lubbock, Texas, Kirk
Thomas and Melisa Roberts as trustees,
both of Lubbock, Texas, and Brent
Beakley, also as trustee, of Odessa,
Texas; to acquire voting shares of Lone
Star State Bancshares, Inc., and
indirectly acquire Lone Star State Bank
of West Texas, both of Lubbock, Texas.
PO 00000
Frm 00051
Fmt 4703
Sfmt 4703
13293
Board of Governors of the Federal Reserve
System, April 1, 2019.
Yao-Chin Chao,
Assistant Secretary of the Board.
[FR Doc. 2019–06587 Filed 4–3–19; 8:45 am]
BILLING CODE P
FEDERAL RESERVE SYSTEM
Formations of, Acquisitions by, and
Mergers of Savings and Loan Holding
Companies
The companies listed in this notice
have applied to the Board for approval,
pursuant to the Home Owners’ Loan Act
(12 U.S.C. 1461 et seq.) (HOLA),
Regulation LL (12 CFR part 238), and
Regulation MM (12 CFR part 239), and
all other applicable statutes and
regulations to become a savings and
loan holding company and/or to acquire
the assets or the ownership of, control
of, or the power to vote shares of a
savings association and nonbanking
companies owned by the savings and
loan holding company, including the
companies listed below.
The applications listed below, as well
as other related filings required by the
Board, are available for immediate
inspection at the Federal Reserve Bank
indicated. The application also will be
available for inspection at the offices of
the Board of Governors. Interested
persons may express their views in
writing on the standards enumerated in
the HOLA (12 U.S.C. 1467a(e)). If the
proposal also involves the acquisition of
a nonbanking company, the review also
includes whether the acquisition of the
nonbanking company complies with the
standards in section 10(c)(4)(B) of the
HOLA (12 U.S.C. 1467a(c)(4)(B)). Unless
otherwise noted, nonbanking activities
will be conducted throughout the
United States.
Unless otherwise noted, comments
regarding each of these applications
must be received at the Reserve Bank
indicated or the offices of the Board of
Governors not later than April 29, 2019.
A. Federal Reserve Bank of Kansas
City (Dennis Denney, Assistant Vice
President) 1 Memorial Drive, Kansas
City, Missouri 64198–0001:
1. Colorado Mutual Holding
Company, Alamosa, Colorado, and
Colorado Mutual Bancorp, Alamosa,
Colorado; to become savings and loan
holding companies, by acquiring 100
percent of San Luis Valley Federal
Bank, Alamosa, Colorado (Federal
Bank), in connection with the
conversion of Federal Bank from a
federal mutual savings association.
E:\FR\FM\04APN1.SGM
04APN1
]]>Agencies
[Federal Register Volume 84, Number 65 (Thursday, April 4, 2019)]
[Notices]
[Pages 13287-13293]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-06557]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2018-0409; FRL-9990-57]
Certain New Chemicals; Receipt and Status Information for October
2018
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 10/01/
2018 to 10/31/2018.
DATES: Comments identified by the specific case number provided in this
document must be received on or before May 6, 2019.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2018-0409, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 10/01/2018 to 10/31/2018. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a
[[Page 13288]]
``new'' chemical substance. Any chemical substance that is not on EPA's
TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as
a ``new chemical substance,'' while a chemical substance that is listed
on the TSCA Inventory is classified as an ``existing chemical
substance.'' (See TSCA section 3(11).) For more information about the
TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received by EPA during this period, Table I
provides the following information (to the extent that such information
is not subject to a CBI claim) on the notices received by EPA during
this period: The EPA case number assigned to the notice that indicates
whether the submission is an initial submission, or an amendment, a
notation of which version was received, the date the notice was
received by EPA, the submitting manufacturer (i.e., domestic producer
or importer), the potential uses identified by the manufacturer in the
notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-19-0001............ 2 10/5/2018 Xyleco.......... (S) Used to produce (S) Trichoderma
enzymes which will reesei 3AX3-9.
be used to
saccharify
agricultural waste
to simple sugars.
J-19-0002............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
[[Page 13289]]
J-19-0003............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
J-19-0004............ 1 10/5/2018 CBI............. (G) Used for the (G) Genetically
manufacture of a modified
chemical. microorganism.
P-18-0235A........... 5 10/3/2018 CBI............. (S) Component in (G) Naphtha Oils.
automotive gasoline/
transportation fuel
for consumer use.
P-18-0309............ 7 10/19/2018 Highland (G) Latex applied to (G) alkanedioic acid,
Logistics, LLC. textiles for anti- 2-alkylene-, polymer
odor and anti- with
microbial polyhaloaromatic
applications. arylate, sodium
salt, hydroxyalkyl
alkanoate, alkanoic
acid, alkenyl-
hydroxypoly(oxy-1,2-
ethanediyl-
alkenyloxymethylalky
oxy polyoxy-1,2-
ethandiyl.
P-18-0341............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with
alkoxylated
polyalcohol, alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-18-0342............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with alkyl
polyglycol, alkyl
dialcohol, and
functionalized
carboxylic acid.
P-18-0343............ 2 10/11/2018 CBI............. (G) Component in (G) Alkane
coatings. dicarboxylic acid,
polymer with
alkoxylated
polyalcohol, and
alkyl dialcohol,
(hydroxy alkyl)
ester.
P-18-0344............ 2 10/11/2018 CBI............. (G) Component in (G) Aromatic
coatings. dicarboxylic acid,
polymer with alkane
dicarboxylic acid,
alkoxylated
polyalcohol, and
alkyl dialcohol.
P-18-0365............ 3 10/30/2018 CBI............. (G) Superabsorbent (G) Starch,
polymer; (S) carboxymethyl ether,
Manufacture for sodium salt, polymer
export only. with polycarboxylic
acid.
P-18-0366............ 3 10/30/2018 CBI............. (G) Superabsorbent (G) Starch,
polymer; (S) carboxymethyl ether,
Manufacture for sodium salt, polymer
export only. with mixed
polycarboxylic
acids.
P-18-0368............ 2 10/15/2018 CBI............. (G) Surfactant; (G) (G)
Protectant. Polyfluoroalkanesulf
onamido-
(hydroxyethyl)-,
phosphate ester
compounds, amine
salts.
P-18-0372............ 2 10/10/2018 Hexion Inc...... (G) Polyol; (S) (G) Formaldehyde,
Reactive modifier polymer with phenol
for Carbon; (S) and heteroatom-
Reactive modifier substituted
for Fiber bonding; heteromonocycle,
(S) Reactive reaction products
modifier for with 1,3-dioxolan-2-
Friction; (S) one and 4-methyl-1,3-
Reactive modifier dioxolan-2-one.
for Coated
abrasives; (S)
Reactive modifier
for Glass Inserts;
(S) Reactive
Modifier for
Refractory; (S)
Reactive modifier
for Bonded
abrasives; (S)
Reactive polyol for
Sealants; (S)
Reactive polyol for
Adhesives; (S)
Reactive polyol for
1 part coatings; (S)
Reactive polyol for
2 part coatings; (S)
Reactive polyol for
composites; (G)
Polyol.
P-18-0373............ 2 10/10/2018 Hexion Inc...... (G) Polyol; (S) (G) Formaldehyde,
Reactive modifier polymer with 2-
for carbon; (S) methyloxirane,
Reactive modifier oxirane, phenol and
for friction; (S) heteroatom-
Reactive modifier substituted
for fiber bonding; heteromonocycle.
(S) Reactive
modifier for coated
abrasives; (S)
Reactive modifier
for glass inserts;
(S) Reactive
modifier for
refractory; (S)
Reactive modifier
for bonded
abrasives; (S)
Reactive polyol for
sealants; (S)
Reactive polyol for
adhesives; (S)
Reactive polyol for
1-part coatings; (S)
Reactive polyol for
2-part coatings; (S)
Reactive polyol for
composites; (G)
Polyol.
P-18-0374............ 3 10/18/2018 Evonik (S) Additive in a (G) Cationic
Corporation. water-borne coating aminomodified
formulation; (S) alkylpolysiloxane.
Glass fiber sizing;
(S) Fillers,
pigments and glass
bead treatment.
P-18-0375............ 3 10/10/2018 Pulcra (S) The PMN substance (S) Fats and
Chemicals, LLC. will be imported as Glyceridic oils,
part of an aqueous vegetable,
emulsion containing sulfonated, sodium
about 10 to 25 salts.
percent PMN
substance with
lubricant oils,
nonionic surfactants
and anionic
surfactants. The
emulsion will be
used in the fat
liquoring stage in
the production of
leather.
P-18-0376............ 1 10/10/2018 Sumitomo (S) Substance used to (G) Thiosulfuric
Chemical improve physical acid, aminoalkyl
Advanced properties in rubber ester.
Technologies, products.
LLC.
P-18-0378............ 2 10/4/2018 CBI............. (G) Industrial (G) Acrylic and
coatings additive. Methacrylic acids
and esters, polymer
with
alkenylimidazole,
alkyl polyalkylene
glycol,
alkenylbenzene,
alkylbenzeneperoxoic
acid ester
initiated, compds.
with
Dialkylaminoalkanol.
P-18-0380............ 3 10/12/2018 CBI............. (G) Automotive brake (G) Butanoic acid
parts (contained ethyl amine.
use).
P-18-0392............ 4 10/15/2018 CBI............. (G) Intermediate (G) Heteromonocycle,
chemical. alkenyl alkyl.
[[Page 13290]]
P-18-0404............ 2 10/19/2018 Gurit (USA), Inc (S) The substance is (G)
part of a mixture alkylmultiheteroatom
with other amines to ,2-
act as a curative functionalisedalkyl-
for a 2-part epoxy 2-hydroxyalkyl-,
formulation. The polymer with
intended use is the alkylheteroatom-
manufacture of wind multialkylfunctional
turbine blades. ised
During manufacture carbomonocyleheteroa
of the blades this tom and
substance forms part multiglycidylether
of the in-mold difunctionalised
coating system which polyalkylene glycol.
is applied to the
blade mold and
further laminated
with glass (or
carbon) reinforced
fibres (GRP). The
manufactured
structure is then
`cured' using heat
and a chemical
reaction occurs
forming a solid
composite structure.
P-18-0404A........... 3 10/30/2018 Gurit (USA), Inc (S) The substance is (G)
part of a mixture alkylmultiheteroatom
with other amines to ,2-
act as a curative functionalisedalkyl-
for a 2-part epoxy 2-hydroxyalkyl-,
formulation. The polymer with
intended use is the alkylheteroatom-
manufacture of wind multialkylfunctional
turbine blades. ised
During manufacture carbomonocyleheteroa
of the blades this tom and
substance forms part multiglycidylether
of the in-mold difunctionalised
coating system which polyalkylene glycol.
is applied to the
blade mold and
further laminated
with glass (or
carbon) reinforced
fibres (GRP). The
manufactured
structure is then
`cured' using heat
and a chemical
reaction occurs
forming a solid
composite structure.
P-19-0001............ 2 10/1/2018 Burgess Pigment (G) Filler for (G) Aluminum silicate
Company. plastic. clay treated with
siloxane (vinyl
functionality).
P-19-0002............ 3 10/10/2018 CBI............. (S) Chemical (G) Polyaromatic
Intermediate. symmetrical
tetracarboxylic
acid.
P-19-0003............ 2 10/19/2018 Sabic Innovative (S) Chemical (G) Polyaromatic
Plastics US, Intermediate. ether symmetrical
LLC. dicarboxylic
anhydride.
P-19-0004............ 2 10/19/2018 Sabic Innovative (G) Molded parts and (G) Aromatic
Plastics US, components. dianhydride, polymer
LLC. with aromatic
diamine and
heteroatom bridged
aromatic diamine,
reaction products
with aromatic
anhydride.
P-19-0005............ 1 10/2/2018 CBI............. (S) Adhesive for (G) Phenol-
automotive parts. formaldehyde epoxy,
polymer with an
alkyl polyether
polysulfide.
P-19-0006............ 1 10/9/2018 CBI............. (G) Open, non- (G) Diisocyanate
dispersive use. polymer blocked with
alkoxyamine.
P-19-0007............ 1 10/16/2018 Allnex USA, Inc. (S) Coating resin (G) Alkenoic acid,
binder. alkyl-, hydroxyalkyl
ester, polymer with
alkyl-alkenoate,
alkenylcarbomonocycl
e, hydroxyalkyl-
alkenoate, alkyl
substituted
alkenoate,
heteromonocycle and
alkenoic acid,
alkylperoxoate-
initiated.
P-19-0007A........... 2 10/25/2018 Allnex USA, Inc. (S) Coating resin (G) Alkenoic acid,
binder. alkyl-, hydroxyalkyl
ester, polymer with
alkyl-alkenoate,
alkenylcarbomonocycl
e, hydroxyalkyl-
alkenoate, alkyl
substituted
alkenoate,
heteromonocycle and
alkenoic acid,
alkylperoxoate-
initiated.
P-19-0008............ 1 10/22/2018 Allnex USA, Inc. (S) The PMN substance (G) Substitued
is an isolated polyalkylenepolycarb
intermediate omonocycle ester,
incorporated as a polymer with
component in several dialkanolamine,
allnex coating resin (hydroxyalkoxy)carbo
products used as nyl] derivs.,
additives for (alkoxyalkoxy)
corrosion protection. alkanol-blocked.
P-19-0009............ 1 10/23/2018 Allnex USA, Inc. (S) The PMN substance (G) Carbonmonocycles,
is used as a coating polymer with
resin additive for haloalkyl
corrosion protection. substituted
heteromonocycle and
hydro-
hydroxypoly[oxy(alky
l-alkanediyl)],
dialkyl-
alkanediamine-
terminated,
hydroxyalkylated,
acetates (salts).
P-19-0010............ 1 10/29/2018 Ashland, Inc.... (G) Adhesive......... (G) Hydrogenated
fatty acid dimers,
polymers with 1,1'-
methylenebis[4-
isocyanatobenzene],
polypropylene
glycol,
polypropylene glycol
ether with
trimethylolpropane
(3:1), and 1,3-
propanediol,
propylene glycol
monomethacrylate-
blocked.
[[Page 13291]]
SN-18-0016........... 2 10/10/2018 Hexion Inc...... (S) Reactive modifier (G) Modified phenol-
for glass inserts; formaldehyde resin.
(S) Reactive
modifier for
refractory; (S)
Reactive modifier
for bonded
abrasives; (S)
Reactive polyol for
sealants; (S)
Reactive polyol for
adhesives; (S)
Reactive polyol for
1 part coatings; (S)
Reactive polyol for
2 part coatings; (S)
Reactive polyol for
composites; (G)
Reactive polymer;
(G) Reactive
polymer; (S)
Reactive modifier
for carbon (powder
EPF); (S) Reactive
modifier for carbon
(liquid EPF); (S)
Reactive modifier
for fiber bonding;
(S) Reactive
modifier for
friction; (S)
Reactive modifier
for coated abrasives.
----------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC including whether the submission was an initial or amended
submission, the date the NOC was received by EPA, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table II--NOCs Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-18-0006.................. 10/24/2018 09/25/2018 ..................... (G) Biofuel-producing
modified
microorganism(s), with
chromosomally-borne
modifications.
J-18-0008.................. 10/15/2018 09/12/2018 ..................... (G) Biofuel-producing
modified
microorganism(s), with
chromosomally-borne
modifications.
P-11-0432A................. 10/02/2018 09/10/2018 The chemical name and (S)
CASRN submitted were Tricyclo[7.3.3.15,11]hept
not in agreement asiloxane-3,7,14-triol,
with the original 1,3,5,7,9,11,14-
PMN submission (P- heptakis(2,4,4-
110432). trimethylpentyl)-.
P-13-0071.................. 10/29/2018 10/01/2018 ..................... (G) Fatty acid amide
chlorides.
P-14-0092.................. 10/29/2018 10/01/2018 ..................... (G) Fatty acid amide
chloride.
P-15-0353.................. 10/05/2018 09/27/2018 ..................... (S) Fatty acids, c16 and
c18-unsaturated, methyl
esters, chlorinated.
P-15-0437.................. 10/16/2018 10/12/2018 ..................... (G) Flexible polyurethane
methacrylate resin.
P-16-0207.................. 10/18/2018 09/12/2018 ..................... (G) Spiro
tetrafluoroborate.
P-16-0483.................. 10/23/2018 10/17/2018 ..................... (G) Inorganic acids, metal
salts, cmpds with
modified hetereoaromatic
casrn.
P-17-0007A................. 10/08/2018 09/20/2018 Updated generic name. (G) Dialkyl 7,10-dioxa,
dithiahexadeca diene.
P-17-0207.................. 10/04/2018 09/17/2018 ..................... (G) 2-alkenoic acid, 2-
alkyl-, 2-alkyl ester,
polymer with alkyl 2-
alkenoate, vinyl
carbomonocyle,
substituted alkyl 2-alkyl-
2-alkenoate and alkyl 2-
alkyl-2-alkenoate,
tertiary alkyl peroxide-
initiated.
P-17-0329.................. 10/30/2018 10/26/2018 ..................... (S) Ethanone, 1-[4-(4-
chlorophenoxy)-2-
(trifluoromethyl)phenyl]-
.
P-17-0334.................. 10/04/2018 09/28/2018 ..................... (S) Benzamide, 2-
(trifluoromethyl)-.
P-18-0040.................. 10/11/2018 10/10/2018 ..................... (G) Alkanedioic acid,
polymers with alkanoic
acid-dipentaerythritol
reaction products,
substituted alkanedioc
acid, substituted
alkanoic acid, isocyanato-
(isocyanatoalkyl)-alkyl
substituted carbomoncycle
and alkyl substituted
alkanediol.
P-18-0042.................. 10/09/2018 10/05/2018 ..................... (S) 2,5-furandione,
polymer with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol,
3a,4,5,6,7,7a-hexahydro-
4,7-methano-1h-inden-5(or
6)-yl ester, ester with
2,3-dihydroxypropyl
neodecanoate, polymer
with 5-isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane, 2-
hydroxyethyl acrylate-
and 2-hydroxyethyl
methacrylate-blocked.
P-18-0100.................. 10/11/2018 10/09/2018 ..................... (G) Substituted alkanoic
acid, polymer with
alkylcarbonate,
alkanediols and
isocyanate substituted
carbomonocycles, sodium
salt, alkenoic acid
substituted polyol
reaction products-
blocked.
----------------------------------------------------------------------------------------------------------------
[[Page 13292]]
In Table III. of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information received by EPA during this time period: The EPA case
number assigned to the test information; the date the test information
was received by EPA, the type of test information submitted, and
chemical substance identity.
Table III--Test Information Received From 10/01/2018 to 10/31/2018
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-87-1436...................... 10/3/2018 QSAR Assessment Report on Vinyl (S) Dodecanoic acid, ethenyl
Laurate; Skin Sensitization: ester.
Local Lymph Node Assay (OECD
TG 429); Repeated Dose 90-Day
Oral Toxicity in Rodents (OECD
TG 408); Repeated Dose
Toxicity and Repro/Devel
Toxicity Screening (OECD TG
422); Chromosome Aberration
Test (OECD TG 473); Gene
Mutation Assay (OECD TG 476);
Micronucleus Test (OECD TG
474); Prenatal Developmental
Toxicity Study (OECD TG 414);
Aquatic Toxicity--Daphnia
(OECD TG 202); Aquatic
Toxicity--Daphnia Reproductive
(OECD TG 211); Aquatic
Toxicity--Algal Growth (OECD
TG 201); Ready
Biodegradability (OECD TG
301); Dermal Irritation/
Corrosion (OECD TG 404);
Bacterial Reverse Mutation
Assay--Ames Test (OECD 471);
Fish Acute Toxicity (OECD TG
203); Activated Sludge Test
(OECD TG 209); Acute Oral
Toxicity (OECD TG 401); Acute
Eye Irritation (OECD TG 405);
Acute Dermal Toxicity (OECD TG
402), Site WWT Discharge
Permit, Flow Chart of the
existing Calvert City Waste
Water process system.
P-18-0300...................... 10/8/2018 Activated Sludge (ISO 18749), (G) Heteromonocycle, alkenoic
Acute Oral Toxicity (OECD 1:1 salt, polymer with alpha-
423), AMES Test (OECD 471), (2-methyl-1-oxo-2-propen-1-
Skin Sensitization-Buehler y)l-omegamethoxypoly(oxy-1,2-
Test (OECD 406), Ready ethanediyl) and ethylalkenoic
Biodegradability (OECD 301A). acid.
P-18-0051...................... 10/11/2018 Hydrolysis as a Function of pH. (G) Alkenoic acid, reaction
products with
[Oxybis(alkylene)]bis[(substi
tuted alkyl)-alkanediol],
polymers with
isocyanatoalkane and
substituted alkanoic acid,
substituted monoacrylate
alkanoate-blocked.
P-18-0126...................... 10/12/2018 Activated Sludge, Respiration (S) Calcium manganese titanium
Inhibition Test (Carbon and oxide.
Ammonium Oxidation) (OECD
209), Algae Growth Inhibition
Study in Pseudokirchneriella
subcapitata (OECD 201), 48-
hour Acute Immobilization
Study in Daphnia magna (OECD
202).
SN-18-0013..................... 10/15/2018 Particle Size Distribution..... (G) Lithiated metal oxide.
P-18-0270-0271................. 10/18/2018 Algae Acute Toxicity (OCSPP (G) Ethanol, 2-butoxy-, 1,1'-
850.5400), Daphnia Acute ester
Toxicity (OCSPP 850.1010, Fish (G) 2-Propanol, 1-butoxy-,
Acute Toxicity (OCSPP 2,2'-ester.
850.1075), Algae Acute
Toxicity (OCSPP 850.5400),
Daphnia Acute Toxicity (OCSPP
850.1010), Fish Acute Toxicity
(OCSPP 850.1075).
P-15-0054...................... 10/24/2018 Physical Chemistry Data (Year 3 (S) Carbon Nanotube.
Reporting):.
TEM, SEM, AFM Raman...
XPS ICP ESD...........
XRD Zeta Potential....
P-16-0543...................... 10/24/2018 Exposure Monitoring Report (G) halogenophosphoric acid
(September 27). metal salt.
P-18-0309...................... 10/26/2018 Skin Irritation (OECD 404)..... (G) alkanedioic acid, 2-
alkylene-, polymer with
polyhaloaromatic arylate,
sodium salt, hydroxyalkyl
alkanoate, alkanoic acid,
alkenyl-hydroxypoly(oxy-1,2-
ethanediyl-
alkenyloxymethylalkyoxy
polyoxy-1,2-ethandiyl.
P-17-0187...................... 10/26/2018 Skin Irritation (OECD 404)..... (G) Polymer with benzoic acid
tetra halogen hydroxy
tetrahalogen oxo H xanthenyl
alkenylaryl alkyl ester
alkalai metal salt, butyl-2-
propenoate, ethenyl
neodecanoate, methyl-2-methyl-
2- propenoate and 2-methyl-2-
propenoic acid.
----------------------------------------------------------------------------------------------------------------
[[Page 13293]]
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 19, 2019.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2019-06557 Filed 4-3-19; 8:45 am]
BILLING CODE 6560-50-P
