Certain New Chemical Substances; Receipt and Status Information for September 2018, 10499-10510 [2019-05376]
Download as PDF
amozie on DSK9F9SC42PROD with NOTICES
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
An agency may not conduct or sponsor
and a person is not required to respond
to a collection of information unless it
displays a currently valid OMB control
number.
DATES: Additional comments may be
submitted on or before April 22, 2019.
ADDRESSES: Submit your comments,
referencing Docket ID Number EPA–
HQ–OAR–2003–0085–0014, to (1) EPA
online using www.regulations.gov (our
preferred method), by email to a-and-rDocket@epa.gov or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Jonathan P. Walsh, Radiation Protection
Division, Office of Radiation and Indoor
Air, Mail Code 6608T, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460;
telephone number: 202–343–9238; fax
number: 202–343–2304; email address:
walsh.jonathan@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA
will be collecting, are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, WJC West, Room
3334, 1301 Constitution Ave. NW,
Washington, DC. The telephone number
for the Docket Center is 202–566–1744.
For additional information about EPA’s
public docket, visit https://www.epa.gov/
dockets.
Abstract: On December 15, 1989,
pursuant to Section 112 of the Clean Air
Act as amended in 1977 (42 U.S.C.
1857), the Environmental Protection
Agency (EPA) promulgated National
Emission Standards for Hazardous Air
Pollutants (NESHAP) to control
radionuclide emissions from several
source categories. The regulations are
codified at 40 CFR part 61. Of the seven
subparts (B, H, I, K, R, T and W)
included in the 1989 rule, as currently
amended, four apply to privately
operated facilities. In addition to
requiring operational practices that limit
emissions, Subparts B, K, R, and W
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
impose radionuclide dose and/or
emission limits, respectively, to
underground uranium mines, elemental
phosphorous plants, phosphogypsum
stacks, and uranium mill tailings
impoundments. Facilities must measure
their radionuclide emissions, perform
analysis or calculations per EPA
procedure, and report the results to the
EPA.
Information collected is used by the
EPA to ensure that public health
continues to be protected from the
hazards of airborne radionuclides by
compliance with these standards.
Compliance is demonstrated through
emissions testing and dose calculation
when appropriate.
Form Numbers: None.
Respondents/affected entities: The
North American Industry Classification
System (NAICS) codes of facilities
associated with the activity of the
respondents are: (1) Elemental
Phosphorous—325180, (2)
Phosphogypsum Stacks—212392, (3)
Underground Uranium Mines—212291,
and (4) Uranium Mill Tailings—212291.
Respondent’s obligation to respond:
Mandatory (CAA, Sec, 112; 40 CFR part
61).
Estimated number of respondents: 17
(total).
Frequency of response: Annual, or
one-time depending on the source
category and respondent activity.
Total estimated burden: 1,880 hours
(per year). Burden is defined at 5 CFR
1320.03(b).
Total estimated cost: $447,850 (per
year), includes $328,000 annualized
capital or operation & maintenance
costs.
Changes in the Estimates: There is
decrease of 1,898 hours in the total
estimated respondent burden compared
with the ICR currently approved by
OMB. This decrease is due to a
combination of factors. Fewer facilities,
particularly uranium mines, are
currently active. The only operating
elemental phosphorus plant has
obtained a waiver from annual testing
and reporting. Compared to previous
estimates, the current calculation
assumes that fewer phosphogypsum
stacks will require radon tests in any
given year. The current assumption
represents an upper bound on costs due
to radon testing and reporting,
compared to the actual observed
activities of these facilities.
Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2019–05313 Filed 3–20–19; 8:45 am]
BILLING CODE 6560–50–P
PO 00000
Frm 00024
Fmt 4703
Sfmt 4703
10499
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2018–0408; FRL 9990–07]
Certain New Chemical Substances;
Receipt and Status Information for
September 2018
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA section 5,
including notice of receipt of a
Premanufacture Notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a Test Marketing
Exemption (TME), both pending and/or
concluded; a Notice of Commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from September 1,
2018 to September 30, 2018.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
April 22, 2019.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2018–0408,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on commenting
or visiting the docket, along with more
SUMMARY:
E:\FR\FM\21MRN1.SGM
21MRN1
10500
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
information about dockets generally, is
available at https://www.epa.gov/
dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Information Management
Division (7407M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
amozie on DSK9F9SC42PROD with NOTICES
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
September 1, 2018 to September 30,
2018. The Agency is providing notice of
receipt of PMNs, SNUNs and MCANs
(including amended notices and test
information); an exemption application
under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or
concluded; NOCs to manufacture a new
chemical substance; and a periodic
status report on new chemical
substances that are currently under EPA
review or have recently concluded
review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the TSCA, 15 U.S.C. 2601 et
seq., a chemical substance may be either
an ‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
PO 00000
Frm 00025
Fmt 4703
Sfmt 4703
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995 (60 FR
25798) (FRL–4942–7). Since the passage
of the Lautenberg amendments to TSCA
in 2016, public interest in information
on the status of section 5 cases under
EPA review and, in particular, the final
determination of such cases, has
increased. In an effort to be responsive
to the regulated community, the users of
this information, and the general public,
to comply with the requirements of
TSCA, to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received
by EPA during this period, Table I
provides the following information (to
the extent that such information is not
subject to a CBI claim) on the notices
received by EPA during this period: The
EPA case number assigned to the notice
that indicates whether the submission is
an initial submission, or an amendment,
a notation of which version was
received, the date the notice was
received by EPA, the submitting
E:\FR\FM\21MRN1.SGM
21MRN1
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
manufacturer (i.e., domestic producer or
importer), the potential uses identified
by the manufacturer in the notice, and
the chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g. P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
10501
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
versions were rejected as incomplete or
invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
J–18–0045 ........
1
09/27/2018
CBI .......................
(G) Ethanol production ........................
P–16–0104A .....
2
09/27/2018
CBI .......................
P–16–0309A .....
4
09/28/2018
CBI .......................
P–16–0310A .....
4
09/28/2018
CBI .......................
P–16–0354A .....
P–16–0355A .....
P–16–0380A .....
3
3
5
09/21/2018
09/21/2018
09/28/2018
CBI .......................
CBI .......................
CBI .......................
(G) This material is used as a feed
stock for another intermediate.
(G) PMN substances are intended for
use as rheological or thixotropic
agents used in the production of
solvent based industrial coatings,
high solid aromatic paints, adhesives, sealants, and other types of
paints and topcoats.
(G) PMN substances are intended for
use as rheological or thixotropic
agents used in the production of
solvent based industrial coatings,
high solid aromatic paints, adhesives, sealants, and other types of
paints and topcoats.
(G) Intermediate ..................................
(G) Intermediate ..................................
(G) Component in electrocoat resin ...
P–16–0381A .....
5
09/28/2018
CBI .......................
(G) Component in electrocoat resin ...
P–16–0382A .....
5
09/28/2018
CBI .......................
(G) Component of an electrocoat
resin.
P–16–0383A .....
5
09/28/2018
CBI .......................
(S) Anti-crater additive for automotive
electrocoat resin.
P–16–0384A .....
5
09/28/2018
CBI .......................
(G) Component of an electrocoat
resin.
P–16–0385A .....
5
09/28/2018
CBI .......................
(G) Component of electrocoat resin ...
P–16–0442A .....
3
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–16–0443A .....
3
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–16–0444A .....
3
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
Frm 00026
Fmt 4703
Sfmt 4703
(G) Biofuel producing Saccharomyces cerevisiae modified, genetically stable.
(S) 2-pyridinecarboxylic acid, 4,5-dichloro-6-(4-chloro-2fluoro-3-methoxyphenyl.
(G) 12-hydroxystearic acid, reaction products with alkylene diamine and alkanoic acid.
(G) 12-hydroxystearic acid, reaction products with alkylene diamine and alkanoic acid.
(G) Esteramine.
(G) Esteramine.
(G) Formic acid, compds. with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether with
bisphenol a (2:1) polymer-n1-(1,3-dimethylbutylidene)n2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts).
(G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed
bisphenol a-epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2-ethanediaminedialdehyde-2-(methylamino)ethanol reaction products
formates (salts).
(G) Formic acid, compds. with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether with
bisphenol a (2:1) polymer-N1-(1,3-dimethylbutylidene)N2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts).
(G) Formic acid, compds. with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether with
bisphenol a (2:1) polymer-N1-(1,3-dimethylbutylidene)N2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts).
(G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed
bisphenol a-epichlorohydrin-polyethylene glycol ether
with bisphenol a (2:1) polymer-N1-(1,3dimethylbutylidene)-N2-[2-[(1, 3dimethylbutylidene)amino]ethyl]-1,2-ethanediaminedialdehyde-2-(methylamino)ethanol reaction products
formates (salts).
(G) Formic acid, compds. with hydrolyzed bisphenol aepichlorohydrin-polyethylene glycol ether with
bisphenol a (2:1) polymer-N1-(1,3-dimethylbutylidene)N2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts).
(G) Carboxylic acids, unsaturated, polymers with
disubstituted amine, alkanediol, substituted
alkylpropanoic acid, alkanedioic acid and substituted
isocyanatocycloalkane, compds. with alkylamine.
(G) Carboxylic acids, unsaturated, hydrogenated polymers with disubstituted amine, alkanediol, substituted
alkylpropanoic acid, alkanedioic acid and substituted
isocyanatocycloalkane, compds. with alkylamine.
(G) Amine salted polyurethane.
E:\FR\FM\21MRN1.SGM
21MRN1
10502
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Carboxylic acids, unsaturated, hydrogenated polymers with substituted alkanediamine, alkanediol, substituted alkylpropanoic acid, alkanedioic acid and substituted isocyanatocycloalkane, compds. with
alkylamine.
(G) Organic sulfonate compound.
(G) Aromatic hydrocarbon resin.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, peroxide initiated.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, peroxide initiated.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, azobis[aliphatic nitrile] initiated.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, peroxide initiated.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, peroxide initiated.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates,
aromatic vinyl monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, azobis[aliphatic nitrile] initiated.
(S) Amines, c36-alkylenedi-, polymers with octahydro4,7-methano-1h-indenedimethanamine and pyromellitic
dianhydride, maleated.
(S) 1-propanaminium, 2-hydroxy-n, n-dimethyl-n-[3-[(1oxooctyl-amino]propyl]-3-sulfo-, inner salt.
(G) 2-alkenoic acid, 2 alkyl, 2 alkyl ester, polymer with
alkyl alkenoate, carbomonocyle, alkyl alkenoate and
alkyl alkenoate, alkyl peroxide initiated.
(S) Oxirane, 2-(chloromethyl)-, polymer with 2methyloxirane polymer with oxirane bis(2-aminopropyl)
ether.
(S) Isocyanic acid, polymethylenepolyphenylene ester,
caprolactam- and phenol-blocked.
P–16–0445A .....
3
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–16–0539A .....
P–16–0583A .....
P–17–0016A .....
4
4
4
09/14/2018
09/27/2018
09/24/2018
CBI .......................
CBI .......................
CBI .......................
(G) Photolithography ...........................
(S) Sealant for head lamps of cars ....
(G) Polymer for coatings .....................
P–17–0017A .....
4
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–17–0018A .....
4
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–17–0019A .....
4
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–17–0020A .....
4
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–17–0021A .....
4
09/24/2018
CBI .......................
(G) Polymer for coatings .....................
P–17–0144A .....
2
09/07/2018
Designer Molecules, Inc.
(G) Coating component ......................
P–17–0184A .....
4
09/24/2018
(S) Liquid Laundry Detergent .............
P–17–0207A .....
4
09/24/2018
Colonial Chemical,
Inc.
CBI .......................
(G) Paint ..............................................
P–17–0234A .....
4
09/11/2018
CBI .......................
(S) Adhesive intermediate ..................
P–17–0282A .....
10
09/14/2018
Elantas PDG, Inc.
P–17–0298A .....
2
09/06/2018
GE Water & Process Technologies.
P–17–0339A .....
5
09/25/2018
Sasol Chemicals
(USA), LLC.
P–17–0340A .....
5
09/25/2018
Sasol Chemicals
(USA), LLC.
P–17–0341A .....
5
09/25/2018
Sasol Chemicals
(USA), LLC.
P–17–0342A .....
5
09/25/2018
P–17–0382A .....
3
09/18/2018
Sasol Chemicals
(USA), LLC.
Chemtura Corporation.
P–17–0387A .....
4
09/24/2018
CBI .......................
(S) This is a component of a mixture
that is used as an impregnating varnish for stators and motors.
(S) The notified substance is described as a hydrogen sulfide scavenger used in controlling hydrogen
sulfide in the vapor space of fuel
storage, shipping vessels and pipelines. It is designed to reduce the
health, safety and environmental
hazards of handling fuels containing
H2S. The substance reacts selectively with (neutralizes) and removes H2S to help meet product
and process specifications.
(S) Paints, (S) Industrial/Commercial
Surfactant, (S) Metal working Fluid,
(S) Agricultural chemicals, (S) Agricultural chemicals.
(S) Industrial/Commercial Surfactant,
(S) Metal working Fluid, (S) Paints,
(S) Metal working Fluid, (S) Agricultural chemicals, (S) Agricultural
chemicals, (S) Paints, (S) Industrial/
Commercial Surfactant.
(S) Paints, (S) Paints, (S) Metal working Fluid, (S) Industrial/Commercial
Surfactant, (S) Agricultural chemicals, (S) Industrial/Commercial Surfactant, (S) Metal working Fluid, (S)
Agricultural chemicals.
(S) Agricultural chemicals, (S) Agricultural chemicals.
(S) Friction Modifier for Automotive lubricants (i.e., Motor oil, Transmission fluid, Differential fluid).
(G) Paint ..............................................
P–17–0388A .....
4
09/24/2018
CBI .......................
(G) Paint ..............................................
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
Frm 00027
Fmt 4703
Sfmt 4703
(S) Formaldehyde, homopolymer, reaction products with
n-propyl-1-propanamine.
(S) Poly(oxy-1,2-ethanediyl), a-(2-butyloctyl)-w-hydroxy-.
(S) Poly(oxy-1,2-ethanediyl), a-(2-hexyldecyl)-w-hydroxy-.
(S) Alcohols, c16-20-branched, ethoxylated.
(S) Poly(oxy-1,2-ethanediyl), a-(2-octyldodecyl)-w-hydroxy-.
(S) Amides, tallow, n,n-bis(2-hydroxypropyl).
(G) Dicarboxylic acids, polymers with alkanoic acid,
alkanediol, susbtituted-alkylalkanoic acid, substituted
alkyl carbomonocyle, alkanedioic acid and alkanediol,
alkanolamine blocked, compds. with alkanolamine.
(G) Dicarboxylic acids, polymers with alkanoic acid,
alkanediol, susbtituted-alkylalkanoic acid, substituted
alkyl carbomonocyle, alkanedioic acid and alkanediol,
alkanolamine blocked, compds with alkanolamine.
E:\FR\FM\21MRN1.SGM
21MRN1
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
10503
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Alkanediamine, dialkyl-, polymer with a-hydro-w-[(1oxo-2-propen-1-yl)oxy]poly(oxy-1,2-ethanediyl) ether
with substituted alkyl-substituted-alkanediol, reaction
products with alkyl-alkanamine.
(G) Fluorinated acrylate, polymer with alkyloxirane
homopolymer monoether with alkanediol mono(2-methyl-2-propenoate), tert-Bu 2-ethylhexaneperoxoate-initiated.
(S) Vanadium, tris(2-ethylhexanoato-ko)tri-μ-oxotri-,
cyclo.
P–17–0393A .....
4
09/25/2018
Allnex USA, Inc ....
(G) UV Curable Coating Resin ...........
P–18–0018A .....
3
09/04/2018
Kyodo Yushi USA,
Inc.
(G) Lubricant .......................................
P–18–0057A .....
8
09/10/2018
CBI .......................
P–18–0057A .....
9
09/21/2018
CBI .......................
P–18–0070A .....
8
09/12/2018
Arrowstar, LLC .....
P–18–0078A .....
2
09/10/2018
CBI .......................
(S) A drier accelerator that is used for
superior drying performance in solvent-borne and waterborne air-dried
paints, inks and coatings.
(S) A drier accelerator that is used for
superior drying performance in solvent-borne and waterborne air-dried
paints, inks and coatings.
(G) Chemical intermediate for polyurethane industry.
(G) Paint ..............................................
P–18–0078A .....
3
09/24/2018
CBI .......................
(G) Paint ..............................................
P–18–0084A .....
4
09/21/2018
(S) Additive for paints and coatings ...
P–18–0088A .....
2
09/14/2018
ShayoNano USA,
Inc.
CBI .......................
P–18–0091A .....
2
09/11/2018
Greenwich Chemical Consulting,
Inc.
(S) Intermediate for use in the manufacture of polymers.
P–18–0092A .....
4
09/05/2018
Shell Chemical
LP—Martinez
Catalyst Plant.
P–18–0100A .....
2
09/17/2018
Allnex USA, Inc ....
(G) The TBPMI chemical is used as a
catalyst, the catalyst is imported
and used in the manufacture of
monoethlyene glycol (MEG).
(G) UV Curable Coating Resin ...........
P–18–0100A .....
5
09/19/2018
Allnex USA, Inc ....
(G) UV Curable Coating Resin ...........
P–18–0102A .....
3
09/17/2018
Allnex USA, Inc ....
(G) UV Curable Coating Resin ...........
P–18–0102A .....
5
09/19/2018
Allnex USA, Inc ....
(G) UV Curable Coating Resin ...........
P–18–0104A .....
5
09/04/2018
CBI .......................
P–18–0109A .....
2
09/07/2018
CBI .......................
(S) Halogen free flame retardant in
thermoplastic polymers.
(G) Additive, open, non-dispersive use
P–18–0116A .....
3
09/14/2018
CBI .......................
P–18–0133A .....
2
09/19/2018
CBI .......................
P–18–0137A .....
2
09/07/2018
Wacker Chemical
Corporation.
P–18–0160A .....
2
09/18/2018
CBI .......................
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
(G) Oil and gas production .................
(G) Intermediate for industrial chemical.
(G) Component in hydraulic fracturing
fluids.
(S) For improved water protection of
construction materials, like cement
fiber board.
(G) Coating component ......................
Frm 00028
Fmt 4703
Sfmt 4703
(S) Vanadium, tris(2-ethylhexanoato-ko)tri-μ-oxotri-,
cyclo.
(G) Waste plastics, polyester, depolymd. with glycols,
polymers with dicarboxylic acids.
(G) 2-alkenoic acid, 2-alkyl-, 2-alkyl ester, polymer with
alkyl 2-alkenoate, 2-substitutedalkyl 2-alkenoate and 2substitutedalkyl 2-alkyl-2-alkenoate, tert alkylperoxoate
initiated.
(G) 2-alkenoic acid, 2-alkyl-, 2-alkyl ester, polymer with
alkyl 2-alkenoate, 2-substitutedalkyl 2-alkenoate and 2substitutedalkyl 2-alkyl-2-alkenoate, tert alkylperoxoate
initiated.
(S) Silicon zinc oxide.
(G) Di(substituted-1,3-trialkylammonium)
dialkylammonium salt.
(G) Vegetable oil, polymers with diethylene glycol- and
polyol- and polyethylene glycol-depolymd.
poly(ethylene terephthalate) waste plastics and
arylcarboxylic acid anhydride.
(S) Phosphonium, tributylmethyl-, iodide (1:1).
(G) Substituted alkanoic acid polymer with
alkylcarbonate, alkanediols and isocyanate substituted
carbomonocycles, sodium salt, alkanoic acid-substituted polyol reaction products-blocked.
(G) Substituted alkanoic acid polymer with
alkylcarbonate, alkanediols and isocyanate substituted
carbomonocycles, sodium salt, alkanoic acid-substituted polyol reaction products-blocked.
(G) Alkanoic acid, ester with [oxybis(alkylene)]bis[alkylsubstituted alkanediol], polymer with alkylcarbonate,
alkanediols, substituted alkanoic acid and isocyanate
and alkyl substituted carbomonocycle, sodium salt.
(G) Alkanoic acid, ester with [oxybis(alkylene)]bis[alkylsubstituted alkanediol], polymer with alkylcarbonate,
alkanediols, substituted alkanoic acid and isocyanate
and alkyl substituted carbomonocycle, sodium salt.
(G) Acrylic acid, reaction products with pentaerythritol,
polymerized.
(G) 2-alkenoic acid, 2-alkyl-, alkyl ester, polymer with 2(dialkylamino)alkyl 2-alkyl-2-alkenoate, alkyl 2-alkyl-2alkenoate and ¿-(2-alkyl-1-oxo-2-alken-1-yl)-¿alkoxypoly(oxy-1,2-alkanediyl), [(1-alkoxy-2-alkyl-1alken-1-yl)oxy]trialkylsilane-initiated.
(G) Fatty acid oil reaction product with fatty acid oil.
(G) Polyol adduct of bisaldehyde.
(G) Alkylsilsesquioxane, ethoxy-terminated.
(G) Heteropolycyclic, halo substituted alkyl substituteddiaromatic amino substituted carbomonocycle, halo
substituted alkyl substituted heteropolycyclic,
tetraaromatic metalloid salt (1:1).
E:\FR\FM\21MRN1.SGM
21MRN1
10504
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
P–18–0172A .....
6
09/04/2018
CBI .......................
P–18–0179A .....
5
09/10/2018
CBI .......................
(S) Category of use: By function and
application, i.e., a dispersive dye for
finishing polyester fibers). Calcium
is an auxiliary drier that is used
solely in combination with primary
and secondary driers. It can also be
used as a pigment wetting agent
and loss of dry additive. Calcium
itself has no drying effect on binders that dry by oxidation. However,
it yields synergistic effects in combination with primary driers such as
cobalt, manganese and Borchi
OXY-Coat, and with secondary driers such as zirconium. When added
during the dispersion, it prevents
adsorption of the primary driers by
the pigments thereby stabilizing surface dry. Calcium also promotes
pigment wetting to improve film
gloss. Applications 10% Calcium
Cem-All® driers are based on a
blend of carboxylate metal salts and
are designed for Solventborne coatings only. Calcium driers are used
in all oxidatively cured systems,
whether air or force dried. They are
used in architectural paints, industrial coatings and stains. Dosage In
conventional alkyd formulations, the
Calcium addition is between 0.03–
0.30% metal based on the vehicle
solids of the coating and will vary
depending upon the composition of
the binder. The specific drier blend
should be experimentally determined. Higher levels might be
needed if added to the dispersion to
prevent drier adsorption. Calcium
drier can be added to the dispersion and/or in the letdown with
other driers.
(G) Adhesive .......................................
P–18–0180A .....
5
09/10/2018
CBI .......................
(G) Adhesive .......................................
P–18–0181A .....
5
09/10/2018
CBI .......................
(G) Adhesive .......................................
P–18–0182 .......
3
09/18/2018
Georgia Institute of
Technology.
P–18–0185A .....
2
09/11/2018
Allnex USA, Inc ....
(S) For heat transfer, heat storage,
thermal emission, and general temperature management in heat-generating systems such as electronics
(S) For light absorption properties
(S) To improve mechanical properties or electrical conductivities of
other materials or products.
(S) Adhesion-enhancing resin for
wood applications.
P–18–0185A .....
3
09/21/2018
Allnex USA, Inc ....
(S) Adhesion-enhancing resin for
wood applications.
P–18–0227A .....
2
09/10/2018
CBI .......................
P–18–0235A .....
4
09/05/2018
CBI .......................
P–18–0235A .....
6
09/12/2018
CBI .......................
P–18–0262 .......
2
09/05/2018
SEPPIC ................
P–18–0277A .....
3
09/12/2018
CBI .......................
(G) Corrosion inhibitor (G) Chemical
intermediate.
(S) Component in automotive gasoline/transportation fuel for consumer
use.
(S) Component in automotive gasoline/transportation fuel for consumer
use.
(S) Function: Thickener Applications:
Paints, adhesive (S) Function:
Polishes Applications: Wood care,
leather care (S) Function: Stabilizer
of suspensions, Applications: Detergency, treatment of physical surfaces, development of soaps.
(G) Adhesive .......................................
P–18–0282A .....
5
09/12/2018
Ashland, Inc. ........
(G) Adhesive .......................................
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
Frm 00029
Fmt 4703
Sfmt 4703
(S) Calcium, carbonate 2-ethylhexanoate neodecanoate
propionate complex.
(G) Phenol, polymer with formaldehyde and phenolic
resin, sodium salt.
(G) Phenol, polymer with formaldehyde and phenolic
resin, potassium salt.
(G) Phenol, polymer with formaldehyde and phenolic
resin, potassium sodium salt.
(G) Multiwalled carbon nanotubes.
(G) Fatty acid, polymer with alkanedioic acid dialkyl
ester, hydroxyl alkyl substituted alkanediol, substituted
carbomonocycle and alkylol substituted alkane.
(G) Fatty acid, polymer with alkanedioic acid dialkyl
ester, hydroxyl alkyl substituted alkanediol, substituted
carbomonocycle and alkylol substituted alkane.
(S) D-glucaric acid.
(G) Naphtha oils.
(G) Naphtha oils.
(S) 2-propenoic acid, 2-methyl-, dodecyl ester, polymer
with ammonium 2-methyl-2-[(1-oxo-2-propen-1yl)amino]-1-propanesulfonate (1:1), n,n-dimethyl-2propenamide and .alpha.-(2-methyl-1-oxo-2-propen-1yl)-.omega.-(dodecyloxy)poly(oxy-1,2-ethanediyl).
(G) Poly[2-(dimethylamino)ethyl acrylate chloride salt,
vinyl acetate, methacrylic acid and alkyl acrylates].
(G) Fatty acid ester, polyether, diisocyanate polymer.
E:\FR\FM\21MRN1.SGM
21MRN1
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
10505
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Hydroxy alkanoic acid, compds. with
aminoalkoxyalcohol-epoxy polymer-alkanolamine reaction products.
(G) Synthetic oil from tires.
P–18–0283A .....
2
09/04/2018
CBI .......................
(G) Open, non-dispersive use ............
P–18–0287A .....
4
09/19/2018
CBI .......................
P–18–0289 .......
2
09/20/2018
CBI .......................
P–18–0290 .......
2
09/20/2018
CBI .......................
P–18–0297 .......
1
09/04/2018
CBI .......................
(G) Company plans to produce ‘‘tires,
wastes, pyrolyzed, condensate oil
fraction’’ (hereafter referred to as
syn oil) (CASRN: 1312024–02–4)
from scrap tire materials. The synthetic oil fraction from tire waste pyrolysis can be used in a variety of
industries. Some examples of use
of synthetic oil include use as a
fuel, upgraded for use as a higher
quality fuel, as an additive for asphalt or other complex mixtures,
used to manufacture other chemicals, etc.
(G) Gas scrubbing,(G) Wastewater
deoderizing, (G) Landfill
deoderizing, (G) Agricultural manure digester deodorizing.
(G) Wastewater deoderizing, (G)
Landfill odor neutralizing, (G) Agricultural manure digester deodorizing, (G) Gas scrubbing.
(G) A Component of material for fabrication.
P–18–0298 .......
1
09/06/2018
Hexion, Inc ...........
(G) Epoxy curing agent .......................
P–18–0299 .......
1
09/07/2018
CBI .......................
(G) Ink additive ...................................
P–18–0300 .......
1
09/10/2018
CBI .......................
(S) Additive for automatic dishwashing
detergent.
P–18–0301 .......
1
09/10/2018
CBI .......................
(G) Coating component ......................
P–18–0302 .......
P–18–0303 .......
1
1
09/10/2018
09/10/2018
CBI .......................
CBI .......................
(G) Chemical intermediate ..................
(G) UV curable oligomer .....................
P–18–0303A .....
2
09/21/2018
CBI .......................
(G) UV curable oligomer .....................
P–18–0304 .......
1
09/11/2018
CBI .......................
(G) An ingredient used in the manufacture of photoresist.
P–18–0305 .......
1
09/12/2018
CBI .......................
(G) Component of ink .........................
P–18–0306 .......
1
09/13/2018
Allnex USA, Inc ....
(S) Protective coating for flatbed and
pickup truck liners.
P–18–0307 .......
1
09/14/2018
CBI .......................
(G) Binder resin in coatings ................
P–18–0308 .......
P–18–0310 .......
2
1
09/18/2018
09/18/2018
CBI .......................
Chitec Technology
Co., Ltd.
(G) Additive for engineering plastics ..
(G) Polymer additive ...........................
P–18–0311 .......
1
09/19/2018
CBI .......................
P–18–0312 .......
1
09/20/2018
CBI .......................
(G) A component of material for fabrication.
(G) Dispersing agent ...........................
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
(G) 2-(2(methylcaboxymonocyclic)amino)ethoxy)-alcohol.
(G) Carbomonocylic-oxazolidine.
(G) Substituted, (alkylaromatic)diaromatic salt with
trihalo-[(trihaloalkyl)substituted]substituted
alkaneamide.
(G) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer
with ethyleneamine, 2-(chloromethyl)oxirane, 2-[[4-(1,1dimethylethyl)phenoxy]methyl]oxirane, 2,2’-[1,6hexanediylbis(oxymethylene)]bis[oxirane], 4,4’-(1methylethylidene)bis[phenol], alkyl ether amine, and 2[(2-methylphenoxy methyl]oxirane.
(G) Alkenoic acid, alkyl-, polymers with alkyl methacrylate, cycloalkyl methacrylate, alkylene dimethacrylate,
and polyalkene glycol hydrogen sulfate [(branched
alkyloxy)alkyl]-(alkenyloxy)alkyl ethers ammonium
salts, metal salts.
(G) Heteromonocycle, alkenoic 1:1 salt, polymer with
alpha-(2-methyl-1-oxo-2-propen-1-y)lomegamethoxypoly(oxy-1,2-ethanediyl) and methylalkenoic acid.
(G) Alkanedioic acid, polymer with cycloalkyl dimethanol,
alkyl and cycloalkyl diisocyanates, dimethyl-alkanediol,
dihydroxyalkanoic acid
methylenebis[isocyanatocyclohexane, hydroxyethyl
acrylate- and polyalkyl glycol monoalkyl ether blocked.
(S) D-glucaric acid, ammonium salt (1:1).
(G) 2-propenoic acid, polymer with aliphatic cyclic epoxide.
(G) 2-propenoic acid, polymer with aliphatic cyclic epoxide.
(G) Sulfonium, bis(dihalocarbomonocycle)
carbomonocycle, salt with substituted heteropolycycle
dihalo sulfoalkanoate (1:1).
(G) Alkenoic acid, alkyl-,alkyl ester, polymer with alkyl
alkenoate, substituted heteromonocycycle, substituted
carbomonocycle, substituted alkanediol and alkenoic
acid, alkali metal salt.
(S) 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester,
polymer with butyl 2-propenoate, ethenylbenzene and
2-oxiranylmethyl 2-methyl-2-propenoate.
(G) Alkyl alkenoic acid, alkyl ester, telomer with alkyl
alkenoate, substituted alkyl alkyl alkenoate, alkylthiol,
substituted carbomonocycle, hydroxyalkyl alkyl
alkenoate and alkyl alkyl alkenoate.
(G) Bis[(hydroxyalkoxy)aryl]carbopolycyclic.
(S) Benzenepropanoic acid, 3-(2h-benzotriazol-2-yl)-5(1,1-dimethylethyl)-4-hydroxy-, 2,2bis(hydroxymethyl)butyl ester.
(G) Triarylsulfonium substituted
oxatricycloalkyloxycarbonyl dihalo alkane sulfonate.
(G) Formaldehyde, polymer with 2-phenoxyalkanol and
.alpha.-phenyl-.omega. hydroxypoly(oxy-1,2alkylnediyl), dihydrogen phosphate 2-phenoxyalkyl hydrogen phosphate, alkaline salt.
E:\FR\FM\21MRN1.SGM
21MRN1
10506
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Alkoxylated glycol ether with 1,2-propanediol, reaction products with alkyl alcohol blocked 1,1′methylenebis [4-isocyanatobenzene] homopolymer and
1,1′-methylenebis [4-isocyanatobenzene].
(G) Substituted triarylsulfonium carbopolycyclic
heteromonocyclic dihalo sulfoacetate.
(G) Substituted triarylsulfonium substituted
carbopolycyclic carboxylate.
(G) Heteropolycycle, alkylaromatic-, salt with dihalo-substituted alkyl carbopolycycle carboxylate.
(G) Sulfonium, alkanoyl substituted carbomonocyclic aromatic]diaromatic-, trihalotris(polyhaloalkyl)phosphate(1) (1:1).
(S) 1-octadecanaminium, n,n-dimethyl-n-[3(triethoxysilyl)propyl]- chloride.
P–18–0313 .......
2
09/26/2018
Ashland, Inc .........
(G) Adhesive .......................................
P–18–0314 .......
1
09/20/2018
CBI .......................
P–18–0315 .......
1
09/20/2018
CBI .......................
P–18–0316 .......
1
09/20/2018
CBI .......................
P–18–0317 .......
1
09/20/2018
CBI .......................
(G) A component of material for fabrication.
(G) A component of material for fabrication.
(G) An ingredient used in the manufacture of photoresist.
(G) An ingredient used in photoresist
manufacture.
P–18–0318 .......
1
09/20/2018
Gelest ...................
P–18–0319 .......
1
09/20/2018
CBI .......................
P–18–0320 .......
P–18–0321 .......
1
1
09/21/2018
09/21/2018
CBI .......................
CBI .......................
P–18–0322 .......
1
09/21/2018
CBI .......................
P–18–0322 .......
3
09/28/2018
CBI .......................
P–18–0323 .......
1
09/21/2018
P–18–0324 .......
2
09/25/2018
Kuraray America,
Inc.
CBI .......................
P–18–0325 .......
1
09/24/2018
Allnex USA, Inc ....
(S) Industrial crosslinking catalyst ......
P–18–0327 .......
P–18–0328 .......
3
1
09/26/2018
09/25/2018
CBI .......................
CBI .......................
P–18–0329 .......
1
09/25/2018
CBI .......................
(G) Filler for non-dispersive resins .....
(G) Chemical intermediate for the
manufacture of plasticizer.
(G) Component of lenses used in
electronic applications.
P–18–0330 .......
P–18–0331 .......
1
1
09/25/2018
09/25/2018
CBI .......................
Evonik Corporation
P–18–0332
P–18–0333
P–18–0334
P–18–0335
P–18–0336
.......
.......
.......
.......
.......
1
1
1
1
1
09/25/2018
09/25/2018
09/26/2018
09/26/2018
09/26/2018
CBI .......................
CBI .......................
Sirrus, Inc .............
Sirrus, Inc .............
Sirrus, Inc .............
(G) Initiator ..........................................
(S) Substrate wetting and anticratering additive for inks.
(G) A component in building materials
(G) A component in building materials
(S) Intermediate use ...........................
(S) Intermediate use ...........................
(S) Intermediate use ...........................
P–18–0337 .......
1
09/26/2018
Sirrus, Inc .............
(S) Intermediate use ...........................
P–18–0338 .......
1
09/26/2018
CBI .......................
P–18–0339 .......
1
09/26/2018
Hitachi America,
Ltd.
P–18–0340 .......
1
09/26/2018
Lanxess Solutions
US, Inc.
(G) An ingredient used in the manufacture of photoresist.
(S) The PMN substance is the immobilizing agent for the microbial promoter of nitrogen decomposition.
(S) One component thermoset elastomer manufacture.
P–18–0345 .......
1
09/26/2018
Chitec Technology
Co., Ltd.
P–18–0346 .......
2
09/29/2018
Chitec Technology
Co., Ltd.
P–18–0347 .......
1
09/27/2018
Evonik Corporation
P–18–0348 .......
1
09/27/2018
Lanxess Solutions
US, Inc.
P–18–0349 .......
1
09/27/2018
Lanxess Solutions
US, Inc.
P–18–0350 .......
1
09/27/2018
Evonik Corporation
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
(S) Research (S) Surface treatment
for added lubricity and anti-static
properties.
(G) Intermediate for manufacture of
plasticizer.
(G) Hardner .........................................
(G) Intermediate for use in chemical
manufacture.
(G) The notified substance is used as
a fragrance ingredient in consumer
products.
(G) The notified substance is used as
a fragrance ingredient in consumer
products.
(G) Raw material for polymer manufacturing.
(S) Resin/binder in paint formulations
for industrial and architectural applications.
(S) R-gen 990 is a liquid
aminoketone-based photoinitator
(PI) intended for use as an ultraviolet (UV) curing agent in highly
pigmented inks, photo-resists, and
masks.
(S) Antioxidant compounded into various polymers to be used in extrusion processes to fabricate articles.
(S) Aldehyde scavenger for the manufacture of polyurethane foams.
(S) Thermoplastic elastomer manufacture/Injection Moulding.
(S) Two component adhesives and
protective coatings for marine, infrastructure, etc..
(S) Filler & pigment treatment, (S) Additive in water-borne UV-curable
coatings, (S) Glass fiber treatment.
Frm 00031
Fmt 4703
Sfmt 4703
(G) Plant oil fatty acids, alkyl esters.
(G) Alkane, diisocyanato-(isocyanatoalkyl)-.
(G) Poly(oxy-ethanediyl), (methyl ethanediyl)bis[hydroxy-.
(G) Heteromonocycle, 4,6-dimethyl-2-(1-phenylethyl)-.
(G) Heteromonocycle, 4,6-dimethyl-2-(1-phenylethyl)-.
(S) 2-propenoic acid, 2-methyl-, 3-methyl-3-buten-1-yl
ester.
(G) Organic acid dimethyl ester, polymer with mixed
alkanediols and 5-isocyanato-1-(isocyanatomethyl)1,3,3-trimethylcyclohexane,
trimethoxysilylalkylalkanamine-blocked.
(G) Benzenesulfonic acid, alkyl-, compd. with 1,1′iminobis[2-propanol] (1:1).
(G) Mixed metal oxide.
(G) Plant oil fatty acids, alkyl esters.
(G) Substituted carbopolycyclic dicarboxylic acid dialkyl
ester, polymer with alkanediol and carbopolycyclic bis
(substituted carbopolycycle) bisalkanol.
(G) Formaldehyde, polymer with alkyl aryl ketone.
(S) Siloxanes and silicones, di-me, 3-(4-hydroxy-3methoxyphenyl)propyl me, ethoxylated propoxylated.
(S) Canola meal.
(S) Flaxseed meal.
(S) Propanedioic acid, 1,3-dihexyl ester.
(S) Propanedioic acid, 1,3-dicyclohexyl ester.
(S) Propanedioic acid, 2,2-bis(hydroxymethyl)-, 1,3dihexyl ester.
(S) Propanedioic acid, 2,2-bis(hydroxymethyl)-, 1,3dicyclohexyl ester.
(G) Sulfonium, triaryl-, salt with polyhalo-4-sulfoalkyl
polycarbocyclic alkane-1-carboxylate (1:1).
(G) Alkyl heteromonocycle with heteroatom substituted
alkyl cycloalkane and 2-hydroxyethyl heteromonocycle
methacrylate-blocked homopolymer.
(S) Poly(oxy-1,4-butanediyl), ¿-hydro-¿-hydroxy-, polymer
with hexahydro-2h-azepin-2-one and 1,1′methylenebis[4-isocyanatobenzene].
(S) 1-butanone, 2-(dimethylamino)-1-[4-(2-ethyl-2-methyl3-oxazolidinyl)phenyl]-2-(phenylmethyl)-
(S) 2,4,8,10-tetraoxa-3,9-diphosphaspiro[5.5]undecane,
3,9-bis-[2-(1-methyl-1-phenylethyl)-4-(1,1,3,3tetramethylbutyl)phenoxy]-.
(S) Amines, polyethylenepoly-, triethylenetetramine fraction, polymers with guanidine hydrochloride (1:1).
(S) Ethanol, 2,2’-[1,4-phenylenebis(oxy)]bis-, polymer
with 1,6-diisocyanatohexane and ¿-hydro-¿hydroxypoly(oxy-1,4-butanediyl).
(S) 1,2,3-propanetriol, polymer with 2,4-diisocyanato-1methylbenzene, methyloxirane and oxirane,
nonylphenol blocked
(G) Aqueous methacrylamido modified polysiloxane.
E:\FR\FM\21MRN1.SGM
21MRN1
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
10507
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Acrylic acid, tricyclo alkyl ester.
(G) Poly(hetero(alkyl-1,2-alkenyl)], alpha-[[[3-(1heteromonocycle)alkyl)substituted
heteroatom]heteroatom-substituted alkyl]]-omega- [[[[3(1-heteromonocycle)alkyl]]substituted heteroatom]
heteroatom-substituted alkyl]]heteroatom]-.
(G) Phenolic resin, alkali, polymer with acetone-phenol
reaction products, formaldehyde and phenol, sodium
salts.
(G) Phenolic resin, alkali, polymer with acetone-phenol
reaction products, formaldehyde and phenol, potassium salts.
(G) Alkanediol, substituted alkyl, polymer with
carbomonocyle, alkanedioate substituted
carbomonocycle, ester with substituted alkanoate.
(G) Sulfonated phenolic resin salt, polymer with acetonephenol reactioin products, formaldehyde and phenol,
sodium salt.
(G) Sulfonated phenolic resin salt, polymer with acetonephenol reactioin products, formaldehyde and phenol,
potassium salt.
(S) 1h-imidazole-1-propanenitrile,2-ethyl-ar-methyl-.
P–18–0351 .......
P–18–0352 .......
1
1
09/27/2018
09/27/2018
CBI .......................
3M Company ........
(G) UV curable inks ............................
(G) Gap filler .......................................
P–18–0353 .......
1
09/27/2018
CBI .......................
(G) Adhesive .......................................
P–18–0354 .......
1
09/27/2018
CBI .......................
(G) Adhesive .......................................
P–18–0355 .......
1
09/27/2018
CBI .......................
(G) Paint ..............................................
P–18–0356 .......
1
09/27/2018
CBI .......................
(G) Adhesive .......................................
P–18–0357 .......
1
09/27/2018
CBI .......................
(G) Adhesive .......................................
P–18–0358 .......
1
09/27/2018
P–18–0359 .......
P–18–0360 .......
1
1
09/28/2018
09/28/2018
Shikoku International Corporation.
CBI .......................
Lanxess Solutions
US, Inc.
(S) Industrial Adhesive for Electronics,
(S) Carbon Fiber Reinforced Plastics (CFRP) Prepreg.
(G) Molded or extruded items .............
(S) Two component adhesives and
protective coatings for marine, infrastructure, etc.
P–18–0361 .......
1
09/28/2018
Lanxess Solutions
US, Inc.
(S) Electrophoretic paint .....................
P–18–0362 .......
1
09/28/2018
Lanxess Solutions
US, Inc.
(S) Corrosion protection coatings .......
P–18–0363 .......
1
09/28/2018
CBI .......................
(G) Adhesive .......................................
P–18–0364 .......
1
09/28/2018
ONA Polymers .....
(G) Industrial quality control additive ..
P–18–0369 .......
P–18–0370 .......
1
1
09/28/2018
09/28/2018
CBI .......................
CBI .......................
(G) Processing aid ..............................
(G) Processing aid ..............................
P–18–0371 .......
1
09/28/2018
CBI .......................
(G) Processing aid ..............................
P–18–0379 .......
1
09/28/2018
P–18–0381 .......
1
09/28/2018
Cardolite Corporation.
The Shepherd
Color Company.
P–18–0382 .......
1
09/28/2018
CBI .......................
(G) Hardener for waterborne epoxy
system.
(G) For use in exterior paints and
plastics, (G) for use in coatings, (G)
for use in high temperature engineering polymers, (G) for use in artist materials.
(G) Dye for printing ink .......................
P–18–0383 .......
1
09/28/2018
CBI .......................
(G) Coatings and inks for commercial
use.
P–18–0384 .......
1
09/28/2018
Sigma-Aldrich CO
LLC.
P–18–0386 .......
P–18–0387 .......
1
1
09/28/2018
09/28/2018
CBI .......................
CBI .......................
(S) Starting material for manufacture
of 6Lithium chloride scintillation
crystals for use in radiation detection.
(G) Electronic use ...............................
(G) Plastic Additive .............................
P–18–0388 .......
1
09/28/2018
CBI .......................
(G) Plastic additive ..............................
P–18–0389 .......
1
09/28/2018
CBI .......................
(G) Component in package coatings ..
P–18–0390 .......
1
09/28/2018
CBI .......................
P–18–0391 .......
1
09/28/2018
Colonial Chemical,
Inc.
(S) Lubricant additive for engine oils,
industrial oils and greases.
(S) Liquid Laundry Detergent .............
VerDate Sep<11>2014
18:27 Mar 20, 2019
Jkt 247001
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
(G) Methoxy vinyl ether- vinylidene fluoride polymer.
(S) Oxirane, 2-methyl-, polymer with 2,4-diisocyanato-1methylbenzene, 2-methyloxirane polymer with oxirane
ether with 1,2,3-propanetriol (3:1), and oxirane, cashew nutshell liq.- and pr alc. -blocked.
(S) Hexane, 1,6-diisocyanato-, homopolymer, 2,2-dimethyl-3-hydroxypropanoic acid- and 3,5-dimethyl-1Hpyrazole-blocked.
(S) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer
with 2,4-diisocyanato-1-methylbenzene, alpha-hydroomega-hydroxypoly[oxy(methyl-1,2-ethanediyl)] and
alpha,alpha′,alpha″-1,2,3-propanetriyltris[omegahydroxypoly[oxy(methyl-1,2-ethanediyl)]], me et ketone
oxime -blocked.
(G) Phenol, polymer with formaldehyde, 5-methyl-1,3benzenediol-terminated,sodium salts.
(G) Alkali humates, polymers with substituted
acrylamides.
(G) Maleic anhydride—substituted alkene copolymer.
(G) Salt of a maleic anhydride and substituted alkene copolymer.
(G) Salt of a maleic anhydride—substituted alkene copolymer.
(G) Cashew nutshell liquid polymer with epichlorohydrin,
formaldehyde, phenol, amines and glycol.
(S) Indium manganese yttrium oxide.
(G) Xanthylium, bis[dicarboxycyclic]sulfonylaminoalkylcyclicamino-disulfo-sulfocyclic-, inner salt,
monocationic salt.
(G) Dialkyl-alkanediamine, polymer with [(oxo-alkenyl)oxy]poly(oxy-alkanediyl)ether with bis(hydroxyalkyl)alkanediol.
(S) Lithium 6.
(G) Alkylalkenyldicyclohexane.
(G) Alkanal, reaction products with alkanediyl bis[alkyltris(alkyl-heterocycle)-1,3,5-triazine-2,4,6-triamine and
hydrogen peroxide.
(G) 1,3,5-triazine-2,4,6-triamine, alkanediyl bis[alkyltris(alkyl-heterocycle)-, allyl derivs., oxidized, hydrogenated.
(G) Alkenoic acid, alkyl-substituted, epoxy ester, polymer
with alkyl alkenoate, alkene, and polylactide.
(G) Formaldehyde, reaction products with diphenylamine,
heteromonocycle and alkene.
(S) 1-propanaminium, n-(carboxymethyl)-n, n-dimethyl-3[(3,5, 5-trimethyl-1-oxohexyl), amino]- inner salt.
E:\FR\FM\21MRN1.SGM
21MRN1
10508
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Alkenoic acid, alkyl, alkyl ester, polymer with alkyl
propenoate, vinyl carbomonocyle, substituted alkyl
propenoate, alkyl 2-alkyl 2-propenoate, alkanediol
mono(2-alkyl-2-propenoate) and bicarbomonocylo alkyl
2-alkyl-2-alkenoate, tertiary alkyl substituted alkane
peroxoate initiated.
(G) Substituted benzylic ether polyethylene glycol alkyl
ether derivative.
(S) Alkenes, c17–25, branched and linear.
P–18–0393 .......
1
09/28/2018
CBI .......................
(G) Paint ..............................................
P–18–0394 .......
1
09/28/2018
CBI .......................
(G) Chemical Intermediate ..................
P–18–0395 .......
1
09/28/2018
Shell Chemical, LP
P–18–0396 .......
1
09/28/2018
CBI .......................
(S) Intermediate for manufacturing a
chemical for use in enhanced oil recovery operations.
(G) Paint ..............................................
P–18–0397 .......
1
09/29/2018
CBI .......................
(G) Additive in oil field chemicals .......
P–18–0398 .......
1
09/29/2018
CBI .......................
(S) Intermediate ..................................
P–18–0399 .......
1
09/29/2018
CBI .......................
P–18–0400 .......
1
09/29/2018
CBI .......................
P–18–0401 .......
1
09/29/2018
CBI .......................
(G) (c) Open, non-dispersive use additive for industrial use only.
(G) Open, non-dispersive use, additive for textile industry.
(G) Additive .........................................
P–18–0402 .......
1
09/29/2018
CBI .......................
(G) Fuel additive .................................
SN–16–0013A ..
SN–18–0005A ..
2
2
09/27/2018
09/28/2018
CBI .......................
CBI .......................
(G) Surfactant .....................................
(G) Monomer for industrial adhesives,
coatings and inks.
SN–18–0006A ..
2
09/20/2018
Colonial Chemical,
Inc.
SN–18–0007A ..
2
09/20/2018
Colonial Chemical,
Inc.
SN–18–0008A ..
2
09/20/2018
Colonial Chemical,
Inc.
SN–18–0010 ....
1
09/27/2018
Colonial Chemical,
Inc.
SN–18–0011 ....
1
09/27/2018
Colonial Chemical,
Inc.
SN–18–0012 ....
1
09/27/2018
Colonial Chemical,
Inc.
SN–18–0013 ....
SN–18–0014 ....
1
1
09/28/2018
09/29/2018
CBI .......................
Hexion, Inc ...........
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(S) Wetting agent for low foam laundry, home care and industrial cleaning.
(G) Lithiated metal oxide for batteries
(S) Reactive monomer for the production of inks, in both aqueous and
waterborne systems, (S) Reactive
monomer for the production of
paints and coatings, in both aqueous and solvent systems, (S) Reactive monomer for the production of
adhesives, in both aqueous and
waterborne systems..
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the TMEs received by EPA
(G) Alkenoic acid, alkyl, polymer with carbomonocyle
alkyl propenoate and substituted alkyl alkenoate, ester
with substituted alkyl alkanoate, tert-butyl substituted
peroxoate-initiated.
(G) Substituted alkanedioic acid, polymer with substituted
alkanoic acid.
(S) 1,2-ethanediamine, n-(1-methylethyl)-n-[2-[(1methylethyl)amino]ethyl]-.
(G) Rosin adduct ester neutralized with amine.
(G) Rosin adduct ester, neutralized with koh.
(S) Glycerides, c16–18 and ci8-unsatd. mono- and di-,
citrates.
(G) Phenol, alkanepolyolbis(heteroalkylene)bis-,
polyalkylene derivs..
(G) Polyfluorinated alkyl quaternary ammonium chloride.
(S) Butanoic acid, 3-mercapto-, 1,1′-[2-(hydroxymethyl)2-[(3-mercapto-1-oxobutoxy)methyl]-1,3-propanediyl]
ester]; (S) Butanoic acid, 3-mercapto-,1,1′-[2,2-bis[(3mercapto-1-oxobutoxy)methyl]-1,3-propanediyl] ester.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-(2-methyl-2-propen1-yl)-.omega.-hydroxy-, c10–16-alkyl ethers.
(S) Poly(oxy-1,2-ethanediyl), ¿-(2-methyl-2-propen-1-yl)¿-hydroxy-, c12–16-alkyl ethers.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-(2-methyl-2-propen1-yl)-.omega.-hydroxy-, c12–15-alkyl ethers.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-(2-methyl-2-propen1-yl)-.omega.-hydroxy-, c10–16-alkyl ethers.
(S) Poly(oxy-1,2-ethanediyl), ¿-(2-methyl-2-propen-1-yl)¿-hydroxy-, c12–16-alkyl ethers.
(S) Poly(oxy-1,2-ethanediyl), .alpha.-(2-methyl-2-propen1-yl)-.omega.-hydroxy-, c12–15-alkyl ethers.
(G) Lithiated metal oxide.
(S) Neononanoic acid, ethenyl ester.
during this period: The EPA case
number assigned to the TME, the date
the TME was received by EPA, the
projected end date for EPA’s review of
the TME, the submitting manufacturer/
importer, the potential uses identified
by the manufacturer/importer in the
TME, and the chemical identity.
amozie on DSK9F9SC42PROD with NOTICES
TABLE II—TMES RECEIVED FROM 9/1/2018 TO 9/30/2018
Case No.
Submission type
T–18–0003A ...
VerDate Sep<11>2014
Test Marketing Exemption
Application (TMEA).
18:27 Mar 20, 2019
Jkt 247001
Received
date
Version
PO 00000
3
Frm 00033
09/06/2018
Fmt 4703
Manufacturer
Use
Chemical substance
CBI .................
(G) Additive ....
(G) Alkylated diphenylamines,
homopolymers.
Sfmt 4703
E:\FR\FM\21MRN1.SGM
21MRN1
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
In Table III. of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs received by EPA
during this period: The EPA case
number assigned to the NOC including
whether the submission was an initial
or amended submission, the date the
NOC was received by EPA, the date of
commencement provided by the
10509
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE III—NOCS RECEIVED FROM 9/1/2018 TO 9/30/2018
amozie on DSK9F9SC42PROD with NOTICES
Case No.
Received date
Commencement
date
If amendment, type of amendment
J–15–0024 ...
J–16–0010A
J–16–0019 ...
J–16–0020 ...
J–16–0025 ...
J–17–0001 ...
J–17–0004 ...
P–11–0432 ...
09/24/2018
09/24/2018
09/24/2018
09/24/2018
09/24/2018
09/11/2018
09/07/2018
09/26/2018
09/05/2018
09/23/2016
09/11/2018
09/05/2018
09/11/2018
09/05/2018
09/05/2018
09/10/2018
...............................................................
Update CBI substantiation ....................
...............................................................
...............................................................
...............................................................
...............................................................
...............................................................
...............................................................
P–13–0051 ...
P–14–0015 ...
P–14–0098A
09/06/2018
09/06/2018
09/18/2018
09/06/2018
09/06/2018
10/15/2016
P–14–0269A
09/07/2018
06/09/2014
P–14–0347 ...
09/27/2018
09/13/2018
...............................................................
...............................................................
Re-substantiating all CBI claims to
comply with the Chemical Safety for
the 21st Century Act.
The cover letter has been amended to
clarify certain language which was
unintentionally misleading.
...............................................................
P–14–0496 ...
09/24/2018
09/13/2018
...............................................................
P–15–0150 ...
P–16–0117A
09/20/2018
09/25/2018
09/20/2018
10/21/2016
P–16–0331 ...
09/13/2018
09/10/2018
...............................................................
Amending the form to include CBI substantiation, in response to a notice of
deficiency, and adding the CASRN
to the NOC.
...............................................................
P–17–0007 ...
09/27/2018
09/20/2018
...............................................................
P–17–0049 ...
P–17–0172 ...
09/11/2018
09/18/2018
08/17/2018
09/13/2018
...............................................................
...............................................................
P–18–0051 ...
09/06/2018
09/06/2018
...............................................................
P–18–0142 ...
09/27/2018
09/23/2018
...............................................................
P–87–0910 ...
09/07/2018
04/14/2009
...............................................................
In Table IV. of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information received
by EPA during this time period: The
EPA case number assigned to the test
information; the date the test
information was received by EPA, the
Chemical substance
(G) Modified trichoderma reesei.
(G) Genetically modified saccharomyces yeast.
(G) Modified trichoderma reesei.
(G) Modified trichoderma reesei.
(G) Modified trichoderma reesei.
(G) Modified saccharomyces cerevisiae.
(G) Modified saccharomyces cerevisiae.
(S) Tricyclo[7.3.3.15,11]heptasiloxane-3,7,14triol,1,3,5,7,9,11,14-heptaisooctyl-, stereoisomer.
(G) Fatty acid amide.
(G) Fatty acid amide.
(G) Polyalkylene polymer, anhydride reaction products, imidated.
(S) Methanone, bis(4-fluorophenyl)-, polymer with
1,4-benzenediol and [1,1′—biphenyl]-4,4′-diol.
(G) Isocyanic acid, polymethylenepolyphenylene
ester, polymer with .alpha.-hydro-.omega.hydroxypolyether and .alpha., alpha.′[(alkylimino)di-2,1-ethanediyl]bis[.omega.hydroxypolyether], acetate (salt) sulfamate (salt).
(G) Polyphosphoric acids, 2-[(alkyl1-oxo-2-propen-1yl)oxy]ethyl esters, compds. with n(aminoiminomethyl)urea, polymers with bu acrylate, n-(hydroxymethyl)-propenamide and styrene.
(G) Cyclohexanedicarboxylic acid, dialkyl ester.
(S) Magnesium hydroxide hypochlorite oxide.
(G) Hydroxy functional triglyceride polymer with
glycerol mono-ester and 1,1′methylenebis[isocyanatobenzene].
(G) Alkyl substituted-dioxa thio substituted-ether
diene,.
(G) Haloalkyl substituted carbomonocycle.
(G) Branched alkylphenol, sulfurized, calcium salts,
overbased.
(G) Alkenoic acid, reaction products with
[oxybis(alkylene)]bis[(substituted alkyl)-alkanediol],
polymers with isocyanatoalkane and substituted
alkanoic acid, substituted monoacrylate
alkanoate-blocked.
(G) Alkenoic acid, alkyl-, alkyl ester, polymer with
substituted alkenoates, alkenoic acid, alkyl
peroxoate-initiated.
(S) 2-cyclopentene-1-acetic acid, alpha allyl, ethyl
ester*.
type of test information submitted, and
chemical substance identity.
TABLE IV—TEST INFORMATION RECEIVED FROM 9/1/2018 TO 9/30/2018
Case No.
P–15–0583 ....
VerDate Sep<11>2014
Received date
9/7/2018
18:27 Mar 20, 2019
Type of test information
Bioaccumulation in Fish: Aqueous and
Dietary Exposure (OECD 305).
Jkt 247001
PO 00000
Frm 00034
Fmt 4703
Chemical substance
(G) butanedioic acid, alkyl amine, dimethylbutyl ester.
Sfmt 4703
E:\FR\FM\21MRN1.SGM
21MRN1
10510
Federal Register / Vol. 84, No. 55 / Thursday, March 21, 2019 / Notices
TABLE IV—TEST INFORMATION RECEIVED FROM 9/1/2018 TO 9/30/2018—Continued
Case No.
Received date
P–17–0283 ....
9/11/2018
P–18–0094 ....
9/11/2018
P–18–0140 ....
9/9/2018
P–18–0141 ....
9/9/2018
P–18–0150 ....
9/12/2018
Type of test information
Local Lymph Node Assay in Mice
(LLNA) (OECD 406).
Particle size analysis .............................
In Vitro Mammalian Chromosome Aberration Test (OECD 473), Skin sensitization (DEREK modeling), Fish
Acute Toxicity Study (OECD 203),
Activated Sludge, Respiration Inhibition Test (Carbon and Ammonium
Oxidation) (OECD 209), Validation of
Analytical Procedures: Text and
Methodology (ICH Harmonised Tripartite Guideline Q2).
In Vitro Mammalian Chromosome Aberration Test (OECD 473), ‘‘Activated
Sludge, Respiration Inhibition Test
(Carbon and Ammonium Oxidation)
(OECD 209), Skin sensitization
(DEREK modeling).
Developmental Toxicity Study in Rats
After Inhalation.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 14, 2019.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2019–05376 Filed 3–20–19; 8:45 am]
BILLING CODE 6560–50–P
[EPA–HQ–OA–2018–0553; FRL–9990–64–
OEI]
ADDRESSES:
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; CEQ–
EPA Presidential Innovation Award for
Environmental Educators Application
(Renewal)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
CEQ–EPA Presidential Innovation
Award for Environmental Educators
Application (EPA ICR Number 2524.02,
OMB Control Number 2090–0031), to
the Office of Management and Budget
(OMB) for review and approval in
amozie on DSK9F9SC42PROD with NOTICES
18:27 Mar 20, 2019
Jkt 247001
(G) pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxanealkylsubstituted,
3,5,7,9,11,13,15-heptakis(polyfluoroalkyl)-.
(G) methyl modified lactam.
(G) ethyl modified lactam.
(G) tertiary amine, compounds with amino sulfonic acid blocked aliphatic isocyanate homopolymer.
Additional comments may be
submitted on or before April 22, 2019.
DATES:
SUMMARY:
(G) Arenesulfonic acid, alkyl derivatives, metal salts.
accordance with the Paperwork
Reduction Act. This is a proposed
extension of the ICR, which is currently
approved through March 31, 2019.
Public comments were previously
requested via the Federal Register on
December 21, 2018 during a 60-day
comment period. This notice allows for
an additional 30 days for public
comments. A fuller description of the
ICR is given below, including its
estimated burden and cost to the public.
An agency may not conduct, or sponsor
and a person is not required to respond
to a collection of information unless it
displays a currently valid OMB control
number.
ENVIRONMENTAL PROTECTION
AGENCY
VerDate Sep<11>2014
Chemical substance
Submit your comments,
referencing Docket ID Number EPAHQ–OA–2018–0553, to (1) EPA online
using www.regulations.gov (our
preferred method), by email to
oei.docket@epa.gov, or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
PO 00000
Frm 00035
Fmt 4703
Sfmt 4703
FOR FURTHER INFORMATION CONTACT:
Javier Araujo, Office of the
Administrator, Office of Environmental
Education, MC–1704–A, Environmental
Protection Agency, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460;
telephone number: 202–564–2642; fax
number: 202–564–2753; email address:
araujo.javier@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA,
will be collecting are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, WJC West, Room
3334, 1301 Constitution Ave. NW,
Washington, DC. The telephone number
for the Docket Center is 202–566–1744.
For additional information about EPA’s
public docket, visit https://www.epa.gov/
dockets.
Abstract: The purpose of this
information collection request is to
collect information from applicants to
select recipients for the Presidential
Innovation Award for Environmental
Educators program. The Environmental
Protection Agency (EPA), in conjunction
with the White House Council on
Environmental Quality (CEQ),
established the award program to meet
the requirements of Section 8 (e) of the
National Environmental Education Act
(20 U.S.C. 5507(e)). Teachers can
participate by completing and
submitting the application form.
Information collected includes
background about the teacher and his/
her experience, completed essay
E:\FR\FM\21MRN1.SGM
21MRN1
Agencies
[Federal Register Volume 84, Number 55 (Thursday, March 21, 2019)]
[Notices]
[Pages 10499-10510]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-05376]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2018-0408; FRL 9990-07]
Certain New Chemical Substances; Receipt and Status Information
for September 2018
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA section 5, including notice of receipt of a Premanufacture Notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a Test Marketing Exemption (TME), both pending and/or
concluded; a Notice of Commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from
September 1, 2018 to September 30, 2018.
DATES: Comments identified by the specific case number provided in this
document must be received on or before April 22, 2019.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2018-0408, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more
[[Page 10500]]
information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (7407M), Office of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington,
DC 20460-0001; telephone number: (202) 564-8593; email address:
rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from September 1, 2018 to September 30, 2018. The Agency is
providing notice of receipt of PMNs, SNUNs and MCANs (including amended
notices and test information); an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on new chemical substances that are currently under EPA review or have
recently concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be
either an ``existing'' chemical substance or a ``new'' chemical
substance. Any chemical substance that is not on EPA's TSCA Inventory
of Chemical Substances (TSCA Inventory) is classified as a ``new
chemical substance,'' while a chemical substance that is listed on the
TSCA Inventory is classified as an ``existing chemical substance.''
(See TSCA section 3(11).) For more information about the TSCA Inventory
go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received by EPA during this period, Table I
provides the following information (to the extent that such information
is not subject to a CBI claim) on the notices received by EPA during
this period: The EPA case number assigned to the notice that indicates
whether the submission is an initial submission, or an amendment, a
notation of which version was received, the date the notice was
received by EPA, the submitting
[[Page 10501]]
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier versions were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Received From 9/1/2018 to 9/30/2018
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-18-0045........... 1 09/27/2018 CBI..................... (G) Ethanol (G) Biofuel
production. producing
Saccharomyces
cerevisiae
modified,
genetically
stable.
P-16-0104A.......... 2 09/27/2018 CBI..................... (G) This material (S) 2-
is used as a feed pyridinecarboxylic
stock for another acid, 4,5-dichloro-
intermediate. 6-(4-chloro-2-
fluoro-3-
methoxyphenyl.
P-16-0309A.......... 4 09/28/2018 CBI..................... (G) PMN substances (G) 12-
are intended for hydroxystearic
use as rheological acid, reaction
or thixotropic products with
agents used in the alkylene diamine
production of and alkanoic acid.
solvent based
industrial
coatings, high
solid aromatic
paints, adhesives,
sealants, and
other types of
paints and
topcoats.
P-16-0310A.......... 4 09/28/2018 CBI..................... (G) PMN substances (G) 12-
are intended for hydroxystearic
use as rheological acid, reaction
or thixotropic products with
agents used in the alkylene diamine
production of and alkanoic acid.
solvent based
industrial
coatings, high
solid aromatic
paints, adhesives,
sealants, and
other types of
paints and
topcoats.
P-16-0354A.......... 3 09/21/2018 CBI..................... (G) Intermediate... (G) Esteramine.
P-16-0355A.......... 3 09/21/2018 CBI..................... (G) Intermediate... (G) Esteramine.
P-16-0380A.......... 5 09/28/2018 CBI..................... (G) Component in (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-n1-(1,3-
dimethylbutylidene
)-n2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products acetates
(salts).
P-16-0381A.......... 5 09/28/2018 CBI..................... (G) Component in (G) Propanoic acid,
electrocoat resin. 2-hydroxy-,
compds. with
hydrolyzed
bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene
)-N2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products formates
(salts).
P-16-0382A.......... 5 09/28/2018 CBI..................... (G) Component of an (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene
)-N2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products
sulfamates(salts).
P-16-0383A.......... 5 09/28/2018 CBI..................... (S) Anti-crater (G) Formic acid,
additive for compds. with
automotive hydrolyzed
electrocoat resin. bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene
)-N2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products acetates
(salts).
P-16-0384A.......... 5 09/28/2018 CBI..................... (G) Component of an (G) Propanoic acid,
electrocoat resin. 2-hydroxy-,
compds. with
hydrolyzed
bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene
)-N2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products formates
(salts).
P-16-0385A.......... 5 09/28/2018 CBI..................... (G) Component of (G) Formic acid,
electrocoat resin. compds. with
hydrolyzed
bisphenol a-
epichlorohydrin-
polyethylene
glycol ether with
bisphenol a (2:1)
polymer-N1-(1,3-
dimethylbutylidene
)-N2-[2-[(1, 3-
dimethylbutylidene
)amino]ethyl]-1,2-
ethanediamine-
dialdehyde-2-
(methylamino)ethan
ol reaction
products
sulfamates(salts).
P-16-0442A.......... 3 09/24/2018 CBI..................... (G) Polymer for (G) Carboxylic
coatings. acids,
unsaturated,
polymers with
disubstituted
amine, alkanediol,
substituted
alkylpropanoic
acid, alkanedioic
acid and
substituted
isocyanatocycloalk
ane, compds. with
alkylamine.
P-16-0443A.......... 3 09/24/2018 CBI..................... (G) Polymer for (G) Carboxylic
coatings. acids,
unsaturated,
hydrogenated
polymers with
disubstituted
amine, alkanediol,
substituted
alkylpropanoic
acid, alkanedioic
acid and
substituted
isocyanatocycloalk
ane, compds. with
alkylamine.
P-16-0444A.......... 3 09/24/2018 CBI..................... (G) Polymer for (G) Amine salted
coatings. polyurethane.
[[Page 10502]]
P-16-0445A.......... 3 09/24/2018 CBI..................... (G) Polymer for (G) Carboxylic
coatings. acids,
unsaturated,
hydrogenated
polymers with
substituted
alkanediamine,
alkanediol,
substituted
alkylpropanoic
acid, alkanedioic
acid and
substituted
isocyanatocycloalk
ane, compds. with
alkylamine.
P-16-0539A.......... 4 09/14/2018 CBI..................... (G) (G) Organic
Photolithography. sulfonate
compound.
P-16-0583A.......... 4 09/27/2018 CBI..................... (S) Sealant for (G) Aromatic
head lamps of cars. hydrocarbon resin.
P-17-0016A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide
initiated.
P-17-0017A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide
initiated.
P-17-0018A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
azobis[aliphatic
nitrile]
initiated.
P-17-0019A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide
initiated.
P-17-0020A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
peroxide
initiated.
P-17-0021A.......... 4 09/24/2018 CBI..................... (G) Polymer for (G) Hydroxyl alkyl
coatings. acrylate ester,
polymer with
acrylates,
aromatic vinyl
monomer,
cycloaliphatic
lactone, and alkyl
carboxylic acid,
azobis[aliphatic
nitrile]
initiated.
P-17-0144A.......... 2 09/07/2018 Designer Molecules, Inc. (G) Coating (S) Amines, c36-
component. alkylenedi-,
polymers with
octahydro-4,7-
methano-1h-
indenedimethanamin
e and pyromellitic
dianhydride,
maleated.
P-17-0184A.......... 4 09/24/2018 Colonial Chemical, Inc.. (S) Liquid Laundry (S) 1-
Detergent. propanaminium, 2-
hydroxy-n, n-
dimethyl-n-[3-[(1-
oxooctyl-
amino]propyl]-3-
sulfo-, inner
salt.
P-17-0207A.......... 4 09/24/2018 CBI..................... (G) Paint.......... (G) 2-alkenoic
acid, 2 alkyl, 2
alkyl ester,
polymer with alkyl
alkenoate,
carbomonocyle,
alkyl alkenoate
and alkyl
alkenoate, alkyl
peroxide
initiated.
P-17-0234A.......... 4 09/11/2018 CBI..................... (S) Adhesive (S) Oxirane, 2-
intermediate. (chloromethyl)-,
polymer with 2-
methyloxirane
polymer with
oxirane bis(2-
aminopropyl)
ether.
P-17-0282A.......... 10 09/14/2018 Elantas PDG, Inc........ (S) This is a (S) Isocyanic acid,
component of a polymethylenepolyp
mixture that is henylene ester,
used as an caprolactam- and
impregnating phenol-blocked.
varnish for
stators and motors.
P-17-0298A.......... 2 09/06/2018 GE Water & Process (S) The notified (S) Formaldehyde,
Technolo gies. substance is homopolymer,
described as a reaction products
hydrogen sulfide with n-propyl-1-
scavenger used in propanamine.
controlling
hydrogen sulfide
in the vapor space
of fuel storage,
shipping vessels
and pipelines. It
is designed to
reduce the health,
safety and
environmental
hazards of
handling fuels
containing H2S.
The substance
reacts selectively
with (neutralizes)
and removes H2S to
help meet product
and process
specifications.
P-17-0339A.......... 5 09/25/2018 Sasol Chemicals (USA), (S) Paints, (S) (S) Poly(oxy-1,2-
LLC. Industrial/ ethanediyl), a-(2-
Commercial butyloctyl)-w-
Surfactant, (S) hydroxy-.
Metal working
Fluid, (S)
Agricultural
chemicals, (S)
Agricultural
chemicals.
P-17-0340A.......... 5 09/25/2018 Sasol Chemicals (USA), (S) Industrial/ (S) Poly(oxy-1,2-
LLC. Commercial ethanediyl), a-(2-
Surfactant, (S) hexyldecyl)-w-
Metal working hydroxy-.
Fluid, (S) Paints,
(S) Metal working
Fluid, (S)
Agricultural
chemicals, (S)
Agricultural
chemicals, (S)
Paints, (S)
Industrial/
Commercial
Surfactant.
P-17-0341A.......... 5 09/25/2018 Sasol Chemicals (USA), (S) Paints, (S) (S) Alcohols, c16-
LLC. Paints, (S) Metal 20-branched,
working Fluid, (S) ethoxylated.
Industrial/
Commercial
Surfactant, (S)
Agricultural
chemicals, (S)
Industrial/
Commercial
Surfactant, (S)
Metal working
Fluid, (S)
Agricultural
chemicals.
P-17-0342A.......... 5 09/25/2018 Sasol Chemicals (USA), (S) Agricultural (S) Poly(oxy-1,2-
LLC. chemicals, (S) ethanediyl), a-(2-
Agricultural octyldodecyl)-w-
chemicals. hydroxy-.
P-17-0382A.......... 3 09/18/2018 Chemtura Corporation.... (S) Friction (S) Amides, tallow,
Modifier for n,n-bis(2-
Automotive hydroxypropyl).
lubricants (i.e.,
Motor oil,
Transmission
fluid,
Differential
fluid).
P-17-0387A.......... 4 09/24/2018 CBI..................... (G) Paint.......... (G) Dicarboxylic
acids, polymers
with alkanoic
acid, alkanediol,
susbtituted-
alkylalkanoic
acid, substituted
alkyl
carbomonocyle,
alkanedioic acid
and alkanediol,
alkanolamine
blocked, compds.
with alkanolamine.
P-17-0388A.......... 4 09/24/2018 CBI..................... (G) Paint.......... (G) Dicarboxylic
acids, polymers
with alkanoic
acid, alkanediol,
susbtituted-
alkylalkanoic
acid, substituted
alkyl
carbomonocyle,
alkanedioic acid
and alkanediol,
alkanolamine
blocked, compds
with alkanolamine.
[[Page 10503]]
P-17-0393A.......... 4 09/25/2018 Allnex USA, Inc......... (G) UV Curable (G) Alkanediamine,
Coating Resin. dialkyl-, polymer
with a-hydro-w-[(1-
oxo-2-propen-1-
yl)oxy]poly(oxy-
1,2-ethanediyl)
ether with
substituted alkyl-
substituted-
alkanediol,
reaction products
with alkyl-
alkanamine.
P-18-0018A.......... 3 09/04/2018 Kyodo Yushi USA, Inc.... (G) Lubricant...... (G) Fluorinated
acrylate, polymer
with alkyloxirane
homopolymer
monoether with
alkanediol mono(2-
methyl-2-
propenoate), tert-
Bu 2-
ethylhexaneperoxoa
te-initiated.
P-18-0057A.......... 8 09/10/2018 CBI..................... (S) A drier (S) Vanadium,
accelerator that tris(2-
is used for ethylhexanoato-
superior drying ko)tri-[micro]-
performance in oxotri-, cyclo.
solvent-borne and
waterborne air-
dried paints, inks
and coatings.
P-18-0057A.......... 9 09/21/2018 CBI..................... (S) A drier (S) Vanadium,
accelerator that tris(2-
is used for ethylhexanoato-
superior drying ko)tri-[micro]-
performance in oxotri-, cyclo.
solvent-borne and
waterborne air-
dried paints, inks
and coatings.
P-18-0070A.......... 8 09/12/2018 Arrowstar, LLC.......... (G) Chemical (G) Waste plastics,
intermediate for polyester,
polyurethane depolymd. with
industry. glycols, polymers
with dicarboxylic
acids.
P-18-0078A.......... 2 09/10/2018 CBI..................... (G) Paint.......... (G) 2-alkenoic
acid, 2-alkyl-, 2-
alkyl ester,
polymer with alkyl
2-alkenoate, 2-
substitutedalkyl 2-
alkenoate and 2-
substitutedalkyl 2-
alkyl-2-alkenoate,
tert
alkylperoxoate
initiated.
P-18-0078A.......... 3 09/24/2018 CBI..................... (G) Paint.......... (G) 2-alkenoic
acid, 2-alkyl-, 2-
alkyl ester,
polymer with alkyl
2-alkenoate, 2-
substitutedalkyl 2-
alkenoate and 2-
substitutedalkyl 2-
alkyl-2-alkenoate,
tert
alkylperoxoate
initiated.
P-18-0084A.......... 4 09/21/2018 ShayoNano USA, Inc...... (S) Additive for (S) Silicon zinc
paints and oxide.
coatings.
P-18-0088A.......... 2 09/14/2018 CBI..................... (G) Oil and gas (G) Di(substituted-
production. 1,3-
trialkylammonium)
dialkylammonium
salt.
P-18-0091A.......... 2 09/11/2018 Greenwich Chemical (S) Intermediate (G) Vegetable oil,
Consulting, Inc. for use in the polymers with
manufacture of diethylene glycol-
polymers. and polyol- and
polyethylene
glycol-depolymd.
poly(ethylene
terephthalate)
waste plastics and
arylcarboxylic
acid anhydride.
P-18-0092A.......... 4 09/05/2018 Shell Chemical LP-- (G) The TBPMI (S) Phosphonium,
Martinez Catalyst Plant. chemical is used tributylmethyl-,
as a catalyst, the iodide (1:1).
catalyst is
imported and used
in the manufacture
of monoethlyene
glycol (MEG).
P-18-0100A.......... 2 09/17/2018 Allnex USA, Inc......... (G) UV Curable (G) Substituted
Coating Resin. alkanoic acid
polymer with
alkylcarbonate,
alkanediols and
isocyanate
substituted
carbomonocycles,
sodium salt,
alkanoic acid-
substituted polyol
reaction products-
blocked.
P-18-0100A.......... 5 09/19/2018 Allnex USA, Inc......... (G) UV Curable (G) Substituted
Coating Resin. alkanoic acid
polymer with
alkylcarbonate,
alkanediols and
isocyanate
substituted
carbomonocycles,
sodium salt,
alkanoic acid-
substituted polyol
reaction products-
blocked.
P-18-0102A.......... 3 09/17/2018 Allnex USA, Inc......... (G) UV Curable (G) Alkanoic acid,
Coating Resin. ester with
[oxybis(alkylene)]
bis[alkyl-
substituted
alkanediol],
polymer with
alkylcarbonate,
alkanediols,
substituted
alkanoic acid and
isocyanate and
alkyl substituted
carbomonocycle,
sodium salt.
P-18-0102A.......... 5 09/19/2018 Allnex USA, Inc......... (G) UV Curable (G) Alkanoic acid,
Coating Resin. ester with
[oxybis(alkylene)]
bis[alkyl-
substituted
alkanediol],
polymer with
alkylcarbonate,
alkanediols,
substituted
alkanoic acid and
isocyanate and
alkyl substituted
carbomonocycle,
sodium salt.
P-18-0104A.......... 5 09/04/2018 CBI..................... (S) Halogen free (G) Acrylic acid,
flame retardant in reaction products
thermoplastic with
polymers. pentaerythritol,
polymerized.
P-18-0109A.......... 2 09/07/2018 CBI..................... (G) Additive, open, (G) 2-alkenoic
non-dispersive use. acid, 2-alkyl-,
alkyl ester,
polymer with 2-
(dialkylamino)alky
l 2-alkyl-2-
alkenoate, alkyl 2-
alkyl-2-alkenoate
and [iquest]-(2-
alkyl-1-oxo-2-
alken-1-yl)-
[iquest]-
alkoxypoly(oxy-1,2-
alkanediyl), [(1-
alkoxy-2-alkyl-1-
alken-1-
yl)oxy]trialkylsil
ane-initiated.
P-18-0116A.......... 3 09/14/2018 CBI..................... (G) Intermediate (G) Fatty acid oil
for industrial reaction product
chemical. with fatty acid
oil.
P-18-0133A.......... 2 09/19/2018 CBI..................... (G) Component in (G) Polyol adduct
hydraulic of bisaldehyde.
fracturing fluids.
P-18-0137A.......... 2 09/07/2018 Wacker Chemical (S) For improved (G)
Corporation. water protection Alkylsilsesquioxan
of construction e, ethoxy-
materials, like terminated.
cement fiber board.
P-18-0160A.......... 2 09/18/2018 CBI..................... (G) Coating (G)
component. Heteropolycyclic,
halo substituted
alkyl substituted-
diaromatic amino
substituted
carbomonocycle,
halo substituted
alkyl substituted
heteropolycyclic,
tetraaromatic
metalloid salt
(1:1).
[[Page 10504]]
P-18-0172A.......... 6 09/04/2018 CBI..................... (S) Category of (S) Calcium,
use: By function carbonate 2-
and application, ethylhexanoate
i.e., a dispersive neodecanoate
dye for finishing propionate
polyester fibers). complex.
Calcium is an
auxiliary drier
that is used
solely in
combination with
primary and
secondary driers.
It can also be
used as a pigment
wetting agent and
loss of dry
additive. Calcium
itself has no
drying effect on
binders that dry
by oxidation.
However, it yields
synergistic
effects in
combination with
primary driers
such as cobalt,
manganese and
Borchi OXY-Coat,
and with secondary
driers such as
zirconium. When
added during the
dispersion, it
prevents
adsorption of the
primary driers by
the pigments
thereby
stabilizing
surface dry.
Calcium also
promotes pigment
wetting to improve
film gloss.
Applications 10%
Calcium Cem-
All[supreg] driers
are based on a
blend of
carboxylate metal
salts and are
designed for
Solventborne
coatings only.
Calcium driers are
used in all
oxidatively cured
systems, whether
air or force
dried. They are
used in
architectural
paints, industrial
coatings and
stains. Dosage In
conventional alkyd
formulations, the
Calcium addition
is between 0.03-
0.30% metal based
on the vehicle
solids of the
coating and will
vary depending
upon the
composition of the
binder. The
specific drier
blend should be
experimentally
determined. Higher
levels might be
needed if added to
the dispersion to
prevent drier
adsorption.
Calcium drier can
be added to the
dispersion and/or
in the letdown
with other driers.
P-18-0179A.......... 5 09/10/2018 CBI..................... (G) Adhesive....... (G) Phenol, polymer
with formaldehyde
and phenolic
resin, sodium
salt.
P-18-0180A.......... 5 09/10/2018 CBI..................... (G) Adhesive....... (G) Phenol, polymer
with formaldehyde
and phenolic
resin, potassium
salt.
P-18-0181A.......... 5 09/10/2018 CBI..................... (G) Adhesive....... (G) Phenol, polymer
with formaldehyde
and phenolic
resin, potassium
sodium salt.
P-18-0182........... 3 09/18/2018 Georgia Institute of (S) For heat (G) Multiwalled
Technology. transfer, heat carbon nanotubes.
storage, thermal
emission, and
general
temperature
management in heat-
generating systems
such as
electronics (S)
For light
absorption
properties (S) To
improve mechanical
properties or
electrical
conductivities of
other materials or
products.
P-18-0185A.......... 2 09/11/2018 Allnex USA, Inc......... (S) Adhesion- (G) Fatty acid,
enhancing resin polymer with
for wood alkanedioic acid
applications. dialkyl ester,
hydroxyl alkyl
substituted
alkanediol,
substituted
carbomonocycle and
alkylol
substituted
alkane.
P-18-0185A.......... 3 09/21/2018 Allnex USA, Inc......... (S) Adhesion- (G) Fatty acid,
enhancing resin polymer with
for wood alkanedioic acid
applications. dialkyl ester,
hydroxyl alkyl
substituted
alkanediol,
substituted
carbomonocycle and
alkylol
substituted
alkane.
P-18-0227A.......... 2 09/10/2018 CBI..................... (G) Corrosion (S) D-glucaric
inhibitor (G) acid.
Chemical
intermediate.
P-18-0235A.......... 4 09/05/2018 CBI..................... (S) Component in (G) Naphtha oils.
automotive
gasoline/
transportation
fuel for consumer
use.
P-18-0235A.......... 6 09/12/2018 CBI..................... (S) Component in (G) Naphtha oils.
automotive
gasoline/
transportation
fuel for consumer
use.
P-18-0262........... 2 09/05/2018 SEPPIC.................. (S) Function: (S) 2-propenoic
Thickener acid, 2-methyl-,
Applications: dodecyl ester,
Paints, adhesive polymer with
(S) Function: ammonium 2-methyl-
Polishes 2-[(1-oxo-2-propen-
Applications: Wood 1-yl)amino]-1-
care, leather care propanesulfonate
(S) Function: (1:1), n,n-
Stabilizer of dimethyl-2-
suspensions, propenamide and
Applications: .alpha.-(2-methyl-
Detergency, 1-oxo-2-propen-1-
treatment of yl)-.omega.-
physical surfaces, (dodecyloxy)poly(o
development of xy-1,2-
soaps. ethanediyl).
P-18-0277A.......... 3 09/12/2018 CBI..................... (G) Adhesive....... (G) Poly[2-
(dimethylamino)eth
yl acrylate
chloride salt,
vinyl acetate,
methacrylic acid
and alkyl
acrylates].
P-18-0282A.......... 5 09/12/2018 Ashland, Inc............ (G) Adhesive....... (G) Fatty acid
ester, polyether,
diisocyanate
polymer.
[[Page 10505]]
P-18-0283A.......... 2 09/04/2018 CBI..................... (G) Open, non- (G) Hydroxy
dispersive use. alkanoic acid,
compds. with
aminoalkoxyalcohol-
epoxy polymer-
alkanolamine
reaction products.
P-18-0287A.......... 4 09/19/2018 CBI..................... (G) Company plans (G) Synthetic oil
to produce from tires.
``tires, wastes,
pyrolyzed,
condensate oil
fraction''
(hereafter
referred to as syn
oil) (CASRN:
1312024-02-4) from
scrap tire
materials. The
synthetic oil
fraction from tire
waste pyrolysis
can be used in a
variety of
industries. Some
examples of use of
synthetic oil
include use as a
fuel, upgraded for
use as a higher
quality fuel, as
an additive for
asphalt or other
complex mixtures,
used to
manufacture other
chemicals, etc.
P-18-0289........... 2 09/20/2018 CBI..................... (G) Gas (G) 2-
scrubbing,(G) (2(methylcaboxymon
Wastewater ocyclic)amino)etho
deoderizing, (G) xy)-alcohol.
Landfill
deoderizing, (G)
Agricultural
manure digester
deodorizing.
P-18-0290........... 2 09/20/2018 CBI..................... (G) Wastewater (G) Carbomonocylic-
deoderizing, (G) oxazolidine.
Landfill odor
neutralizing, (G)
Agricultural
manure digester
deodorizing, (G)
Gas scrubbing.
P-18-0297........... 1 09/04/2018 CBI..................... (G) A Component of (G) Substituted,
material for (alkylaromatic)dia
fabrication. romatic salt with
trihalo-
[(trihaloalkyl)sub
stituted]substitut
ed alkaneamide.
P-18-0298........... 1 09/06/2018 Hexion, Inc............. (G) Epoxy curing (G) 1,3-
agent. propanediol, 2-
ethyl-2-
(hydroxymethyl)-,
polymer with
ethyleneamine, 2-
(chloromethyl)oxir
ane, 2-[[4-(1,1-
dimethylethyl)phen
oxy]methyl]oxirane
, 2,2'-[1,6-
hexanediylbis(oxym
ethylene)]bis[oxir
ane], 4,4'-(1-
methylethylidene)b
is[phenol], alkyl
ether amine, and 2-
[(2-methylphenoxy
methyl]oxirane.
P-18-0299........... 1 09/07/2018 CBI..................... (G) Ink additive... (G) Alkenoic acid,
alkyl-, polymers
with alkyl
methacrylate,
cycloalkyl
methacrylate,
alkylene
dimethacrylate,
and polyalkene
glycol hydrogen
sulfate [(branched
alkyloxy)alkyl]-
(alkenyloxy)alkyl
ethers ammonium
salts, metal
salts.
P-18-0300........... 1 09/10/2018 CBI..................... (S) Additive for (G)
automatic Heteromonocycle,
dishwashing alkenoic 1:1 salt,
detergent. polymer with alpha-
(2-methyl-1-oxo-2-
propen-1-y)l-
omegamethoxypoly(o
xy-1,2-ethanediyl)
and methyl-
alkenoic acid.
P-18-0301........... 1 09/10/2018 CBI..................... (G) Coating (G) Alkanedioic
component. acid, polymer with
cycloalkyl
dimethanol, alkyl
and cycloalkyl
diisocyanates,
dimethyl-
alkanediol,
dihydroxyalkanoic
acid
methylenebis[isocy
anatocyclohexane,
hydroxyethyl
acrylate- and
polyalkyl glycol
monoalkyl ether
blocked.
P-18-0302........... 1 09/10/2018 CBI..................... (G) Chemical (S) D-glucaric
intermediate. acid, ammonium
salt (1:1).
P-18-0303........... 1 09/10/2018 CBI..................... (G) UV curable (G) 2-propenoic
oligomer. acid, polymer with
aliphatic cyclic
epoxide.
P-18-0303A.......... 2 09/21/2018 CBI..................... (G) UV curable (G) 2-propenoic
oligomer. acid, polymer with
aliphatic cyclic
epoxide.
P-18-0304........... 1 09/11/2018 CBI..................... (G) An ingredient (G) Sulfonium,
used in the bis(dihalocarbomon
manufacture of ocycle)
photoresist. carbomonocycle,
salt with
substituted
heteropolycycle
dihalo
sulfoalkanoate
(1:1).
P-18-0305........... 1 09/12/2018 CBI..................... (G) Component of (G) Alkenoic acid,
ink. alkyl-,alkyl
ester, polymer
with alkyl
alkenoate,
substituted
heteromonocycycle,
substituted
carbomonocycle,
substituted
alkanediol and
alkenoic acid,
alkali metal salt.
P-18-0306........... 1 09/13/2018 Allnex USA, Inc......... (S) Protective (S) 2-propenoic
coating for acid, 2-methyl-, 2-
flatbed and pickup hydroxyethyl
truck liners. ester, polymer
with butyl 2-
propenoate,
ethenylbenzene and
2-oxiranylmethyl 2-
methyl-2-
propenoate.
P-18-0307........... 1 09/14/2018 CBI..................... (G) Binder resin in (G) Alkyl alkenoic
coatings. acid, alkyl ester,
telomer with alkyl
alkenoate,
substituted alkyl
alkyl alkenoate,
alkylthiol,
substituted
carbomonocycle,
hydroxyalkyl alkyl
alkenoate and
alkyl alkyl
alkenoate.
P-18-0308........... 2 09/18/2018 CBI..................... (G) Additive for (G)
engineering Bis[(hydroxyalkoxy
plastics. )aryl]carbopolycyc
lic.
P-18-0310........... 1 09/18/2018 Chitec Technology Co., (G) Polymer (S)
Ltd. additive. Benzenepropanoic
acid, 3-(2h-
benzotriazol-2-yl)-
5-(1,1-
dimethylethyl)-4-
hydroxy-, 2,2-
bis(hydroxymethyl)
butyl ester.
P-18-0311........... 1 09/19/2018 CBI..................... (G) A component of (G)
material for Triarylsulfonium
fabrication. substituted
oxatricycloalkylox
ycarbonyl dihalo
alkane sulfonate.
P-18-0312........... 1 09/20/2018 CBI..................... (G) Dispersing (G) Formaldehyde,
agent. polymer with 2-
phenoxyalkanol and
.alpha.-phenyl-
.omega.
hydroxypoly(oxy-
1,2-alkylnediyl),
dihydrogen
phosphate 2-
phenoxyalkyl
hydrogen
phosphate,
alkaline salt.
[[Page 10506]]
P-18-0313........... 2 09/26/2018 Ashland, Inc............ (G) Adhesive....... (G) Alkoxylated
glycol ether with
1,2-propanediol,
reaction products
with alkyl alcohol
blocked 1,1'-
methylenebis [4-
isocyanatobenzene]
homopolymer and
1,1'-methylenebis
[4-
isocyanatobenzene]
.
P-18-0314........... 1 09/20/2018 CBI..................... (G) A component of (G) Substituted
material for triarylsulfonium
fabrication. carbopolycyclic
heteromonocyclic
dihalo
sulfoacetate.
P-18-0315........... 1 09/20/2018 CBI..................... (G) A component of (G) Substituted
material for triarylsulfonium
fabrication. substituted
carbopolycyclic
carboxylate.
P-18-0316........... 1 09/20/2018 CBI..................... (G) An ingredient (G)
used in the Heteropolycycle,
manufacture of alkylaromatic-,
photoresist. salt with dihalo-
substituted alkyl
carbopolycycle
carboxylate.
P-18-0317........... 1 09/20/2018 CBI..................... (G) An ingredient (G) Sulfonium,
used in alkanoyl
photoresist substituted
manufacture. carbomonocyclic
aromatic]diaromati
c-,
trihalotris(polyha
loalkyl)phosphate(
1-) (1:1).
P-18-0318........... 1 09/20/2018 Gelest.................. (S) Research (S) (S) 1-
Surface treatment octadecanaminium,
for added n,n-dimethyl-n-[3-
lubricity and anti- (triethoxysilyl)pr
static properties. opyl]- chloride.
P-18-0319........... 1 09/20/2018 CBI..................... (G) Intermediate (G) Plant oil fatty
for manufacture of acids, alkyl
plasticizer. esters.
P-18-0320........... 1 09/21/2018 CBI..................... (G) Hardner........ (G) Alkane,
diisocyanato-
(isocyanatoalkyl)-
.
P-18-0321........... 1 09/21/2018 CBI..................... (G) Intermediate (G) Poly(oxy-
for use in ethanediyl),
chemical (methyl
manufacture. ethanediyl)bis[hyd
roxy-.
P-18-0322........... 1 09/21/2018 CBI..................... (G) The notified (G)
substance is used Heteromonocycle,
as a fragrance 4,6-dimethyl-2-(1-
ingredient in phenylethyl)-.
consumer products.
P-18-0322........... 3 09/28/2018 CBI..................... (G) The notified (G)
substance is used Heteromonocycle,
as a fragrance 4,6-dimethyl-2-(1-
ingredient in phenylethyl)-.
consumer products.
P-18-0323........... 1 09/21/2018 Kuraray America, Inc.... (G) Raw material (S) 2-propenoic
for polymer acid, 2-methyl-, 3-
manufacturing. methyl-3-buten-1-
yl ester.
P-18-0324........... 2 09/25/2018 CBI..................... (S) Resin/binder in (G) Organic acid
paint formulations dimethyl ester,
for industrial and polymer with mixed
architectural alkanediols and 5-
applications. isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexa
ne,
trimethoxysilylalk
ylalkanamine-
blocked.
P-18-0325........... 1 09/24/2018 Allnex USA, Inc......... (S) Industrial (G) Benzenesulfonic
crosslinking acid, alkyl-,
catalyst. compd. with 1,1'-
iminobis[2-
propanol] (1:1).
P-18-0327........... 3 09/26/2018 CBI..................... (G) Filler for non- (G) Mixed metal
dispersive resins. oxide.
P-18-0328........... 1 09/25/2018 CBI..................... (G) Chemical (G) Plant oil fatty
intermediate for acids, alkyl
the manufacture of esters.
plasticizer.
P-18-0329........... 1 09/25/2018 CBI..................... (G) Component of (G) Substituted
lenses used in carbopolycyclic
electronic dicarboxylic acid
applications. dialkyl ester,
polymer with
alkanediol and
carbopolycyclic
bis (substituted
carbopolycycle)
bisalkanol.
P-18-0330........... 1 09/25/2018 CBI..................... (G) Initiator...... (G) Formaldehyde,
polymer with alkyl
aryl ketone.
P-18-0331........... 1 09/25/2018 Evonik Corporation...... (S) Substrate (S) Siloxanes and
wetting and anti- silicones, di-me,
cratering additive 3-(4-hydroxy-3-
for inks. methoxyphenyl)prop
yl me, ethoxylated
propoxylated.
P-18-0332........... 1 09/25/2018 CBI..................... (G) A component in (S) Canola meal.
building materials.
P-18-0333........... 1 09/25/2018 CBI..................... (G) A component in (S) Flaxseed meal.
building materials.
P-18-0334........... 1 09/26/2018 Sirrus, Inc............. (S) Intermediate (S) Propanedioic
use. acid, 1,3-dihexyl
ester.
P-18-0335........... 1 09/26/2018 Sirrus, Inc............. (S) Intermediate (S) Propanedioic
use. acid, 1,3-
dicyclohexyl
ester.
P-18-0336........... 1 09/26/2018 Sirrus, Inc............. (S) Intermediate (S) Propanedioic
use. acid, 2,2-
bis(hydroxymethyl)-
, 1,3-dihexyl
ester.
P-18-0337........... 1 09/26/2018 Sirrus, Inc............. (S) Intermediate (S) Propanedioic
use. acid, 2,2-
bis(hydroxymethyl)-
, 1,3-dicyclohexyl
ester.
P-18-0338........... 1 09/26/2018 CBI..................... (G) An ingredient (G) Sulfonium,
used in the triaryl-, salt
manufacture of with polyhalo-4-
photoresist. sulfoalkyl
polycarbocyclic
alkane-1-
carboxylate (1:1).
P-18-0339........... 1 09/26/2018 Hitachi America, Ltd.... (S) The PMN (G) Alkyl
substance is the heteromonocycle
immobilizing agent with heteroatom
for the microbial substituted alkyl
promoter of cycloalkane and 2-
nitrogen hydroxyethyl
decomposition. heteromonocycle
methacrylate-
blocked
homopolymer.
P-18-0340........... 1 09/26/2018 Lanxess Solutions US, (S) One component (S) Poly(oxy-1,4-
Inc. thermoset butanediyl),
elastomer [iquest]-hydro-
manufacture. [iquest]-hydroxy-,
polymer with
hexahydro-2h-
azepin-2-one and
1,1'-
methylenebis[4-
isocyanatobenzene]
.
P-18-0345........... 1 09/26/2018 Chitec Technology Co., (S) R-gen 990 is a (S) 1-butanone, 2-
Ltd. liquid aminoketone- (dimethylamino)-1-
based [4-(2-ethyl-2-
photoinitator (PI) methyl-3-
intended for use oxazolidinyl)pheny
as an ultraviolet l]-2-
(UV) curing agent (phenylmethyl)-
in highly
pigmented inks,
photo-resists, and
masks.
P-18-0346........... 2 09/29/2018 Chitec Technology Co., (S) Antioxidant (S) 2,4,8,10-
Ltd. compounded into tetraoxa-3,9-
various polymers diphosphaspiro[5.5
to be used in ]undecane, 3,9-bis-
extrusion [2-(1-methyl-1-
processes to phenylethyl)-4-
fabricate articles. (1,1,3,3-
tetramethylbutyl)p
henoxy]-.
P-18-0347........... 1 09/27/2018 Evonik Corporation...... (S) Aldehyde (S) Amines,
scavenger for the polyethylenepoly-,
manufacture of triethylenetetrami
polyurethane foams. ne fraction,
polymers with
guanidine
hydrochloride
(1:1).
P-18-0348........... 1 09/27/2018 Lanxess Solutions US, (S) Thermoplastic (S) Ethanol, 2,2'-
Inc. elastomer [1,4-
manufacture/ phenylenebis(oxy)]
Injection Moulding. bis-, polymer with
1,6-
diisocyanatohexane
and [iquest]-hydro-
[iquest]-
hydroxypoly(oxy-
1,4-butanediyl).
P-18-0349........... 1 09/27/2018 Lanxess Solutions US, (S) Two component (S) 1,2,3-
Inc. adhesives and propanetriol,
protective polymer with 2,4-
coatings for diisocyanato-1-
marine, methylbenzene,
infrastructure, methyloxirane and
etc.. oxirane,
nonylphenol
blocked
P-18-0350........... 1 09/27/2018 Evonik Corporation...... (S) Filler & (G) Aqueous
pigment treatment, methacrylamido
(S) Additive in modified
water-borne UV- polysiloxane.
curable coatings,
(S) Glass fiber
treatment.
[[Page 10507]]
P-18-0351........... 1 09/27/2018 CBI..................... (G) UV curable inks (G) Acrylic acid,
tricyclo alkyl
ester.
P-18-0352........... 1 09/27/2018 3M Company.............. (G) Gap filler..... (G)
Poly(hetero(alkyl-
1,2-alkenyl)],
alpha-[[[3-(1-
heteromonocycle)al
kyl)substituted
heteroatom]heteroa
tom-substituted
alkyl]]-omega-
[[[[3-(1-
heteromonocycle)al
kyl]]substituted
heteroatom]
heteroatom-
substituted
alkyl]]heteroatom]-
.
P-18-0353........... 1 09/27/2018 CBI..................... (G) Adhesive....... (G) Phenolic resin,
alkali, polymer
with acetone-
phenol reaction
products,
formaldehyde and
phenol, sodium
salts.
P-18-0354........... 1 09/27/2018 CBI..................... (G) Adhesive....... (G) Phenolic resin,
alkali, polymer
with acetone-
phenol reaction
products,
formaldehyde and
phenol, potassium
salts.
P-18-0355........... 1 09/27/2018 CBI..................... (G) Paint.......... (G) Alkanediol,
substituted alkyl,
polymer with
carbomonocyle,
alkanedioate
substituted
carbomonocycle,
ester with
substituted
alkanoate.
P-18-0356........... 1 09/27/2018 CBI..................... (G) Adhesive....... (G) Sulfonated
phenolic resin
salt, polymer with
acetone-phenol
reactioin
products,
formaldehyde and
phenol, sodium
salt.
P-18-0357........... 1 09/27/2018 CBI..................... (G) Adhesive....... (G) Sulfonated
phenolic resin
salt, polymer with
acetone-phenol
reactioin
products,
formaldehyde and
phenol, potassium
salt.
P-18-0358........... 1 09/27/2018 Shikoku International (S) Industrial (S) 1h-imidazole-1-
Corporation. Adhesive for propanenitrile,2-
Electronics, (S) ethyl-ar-methyl-.
Carbon Fiber
Reinforced
Plastics (CFRP)
Prepreg.
P-18-0359........... 1 09/28/2018 CBI..................... (G) Molded or (G) Methoxy vinyl
extruded items. ether- vinylidene
fluoride polymer.
P-18-0360........... 1 09/28/2018 Lanxess Solutions US, (S) Two component (S) Oxirane, 2-
Inc. adhesives and methyl-, polymer
protective with 2,4-
coatings for diisocyanato-1-
marine, methylbenzene, 2-
infrastructure, methyloxirane
etc. polymer with
oxirane ether with
1,2,3-propanetriol
(3:1), and
oxirane, cashew
nutshell liq.- and
pr alc. -blocked.
P-18-0361........... 1 09/28/2018 Lanxess Solutions US, (S) Electrophoretic (S) Hexane, 1,6-
Inc. paint. diisocyanato-,
homopolymer, 2,2-
dimethyl-3-
hydroxypropanoic
acid- and 3,5-
dimethyl-1H-
pyrazole-blocked.
P-18-0362........... 1 09/28/2018 Lanxess Solutions US, (S) Corrosion (S) 1,3-
Inc. protection propanediol, 2-
coatings. ethyl-2-
(hydroxymethyl)-,
polymer with 2,4-
diisocyanato-1-
methylbenzene,
alpha-hydro-omega-
hydroxypoly[oxy(me
thyl-1,2-
ethanediyl)] and
alpha,alpha',alpha
''-1,2,3-
propanetriyltris[o
mega-
hydroxypoly[oxy(me
thyl-1,2-
ethanediyl)]], me
et ketone oxime -
blocked.
P-18-0363........... 1 09/28/2018 CBI..................... (G) Adhesive....... (G) Phenol, polymer
with formaldehyde,
5-methyl-1,3-
benzenediol-
terminated,sodium
salts.
P-18-0364........... 1 09/28/2018 ONA Polymers............ (G) Industrial (G) Alkali humates,
quality control polymers with
additive. substituted
acrylamides.
P-18-0369........... 1 09/28/2018 CBI..................... (G) Processing aid. (G) Maleic
anhydride--substit
uted alkene
copolymer.
P-18-0370........... 1 09/28/2018 CBI..................... (G) Processing aid. (G) Salt of a
maleic anhydride
and substituted
alkene copolymer.
P-18-0371........... 1 09/28/2018 CBI..................... (G) Processing aid. (G) Salt of a
maleic anhydride--
substituted alkene
copolymer.
P-18-0379........... 1 09/28/2018 Cardolite Corporation... (G) Hardener for (G) Cashew nutshell
waterborne epoxy liquid polymer
system. with
epichlorohydrin,
formaldehyde,
phenol, amines and
glycol.
P-18-0381........... 1 09/28/2018 The Shepherd Color (G) For use in (S) Indium
Company. exterior paints manganese yttrium
and plastics, (G) oxide.
for use in
coatings, (G) for
use in high
temperature
engineering
polymers, (G) for
use in artist
materials.
P-18-0382........... 1 09/28/2018 CBI..................... (G) Dye for (G) Xanthylium,
printing ink. bis[dicarboxycycli
c]sulfonylamino-
alkylcyclicamino-
disulfo-
sulfocyclic-,
inner salt,
monocationic salt.
P-18-0383........... 1 09/28/2018 CBI..................... (G) Coatings and (G) Dialkyl-
inks for alkanediamine,
commercial use. polymer with [(oxo-
alkenyl)oxy]poly(o
xy-
alkanediyl)ether
with
bis(hydroxyalkyl)-
alkanediol.
P-18-0384........... 1 09/28/2018 Sigma-Aldrich CO LLC.... (S) Starting (S) Lithium 6.
material for
manufacture of
6Lithium chloride
scintillation
crystals for use
in radiation
detection.
P-18-0386........... 1 09/28/2018 CBI..................... (G) Electronic use. (G)
Alkylalkenyldicycl
ohexane.
P-18-0387........... 1 09/28/2018 CBI..................... (G) Plastic (G) Alkanal,
Additive. reaction products
with alkanediyl
bis[alkyl-
tris(alkyl-
heterocycle)-1,3,5-
triazine-2,4,6-
triamine and
hydrogen peroxide.
P-18-0388........... 1 09/28/2018 CBI..................... (G) Plastic (G) 1,3,5-triazine-
additive. 2,4,6-triamine,
alkanediyl
bis[alkyl-
tris(alkyl-
heterocycle)-,
allyl derivs.,
oxidized,
hydrogenated.
P-18-0389........... 1 09/28/2018 CBI..................... (G) Component in (G) Alkenoic acid,
package coatings. alkyl-substituted,
epoxy ester,
polymer with alkyl
alkenoate, alkene,
and polylactide.
P-18-0390........... 1 09/28/2018 CBI..................... (S) Lubricant (G) Formaldehyde,
additive for reaction products
engine oils, with
industrial oils diphenylamine,
and greases. heteromonocycle
and alkene.
P-18-0391........... 1 09/28/2018 Colonial Chemical, Inc.. (S) Liquid Laundry (S) 1-
Detergent. propanaminium, n-
(carboxymethyl)-n,
n-dimethyl-3-
[(3,5, 5-trimethyl-
1-oxohexyl),
amino]- inner
salt.
[[Page 10508]]
P-18-0393........... 1 09/28/2018 CBI..................... (G) Paint.......... (G) Alkenoic acid,
alkyl, alkyl
ester, polymer
with alkyl
propenoate, vinyl
carbomonocyle,
substituted alkyl
propenoate, alkyl
2-alkyl 2-
propenoate,
alkanediol mono(2-
alkyl-2-
propenoate) and
bicarbomonocylo
alkyl 2-alkyl-2-
alkenoate,
tertiary alkyl
substituted alkane
peroxoate
initiated.
P-18-0394........... 1 09/28/2018 CBI..................... (G) Chemical (G) Substituted
Intermediate. benzylic ether
polyethylene
glycol alkyl ether
derivative.
P-18-0395........... 1 09/28/2018 Shell Chemical, LP...... (S) Intermediate (S) Alkenes, c17-
for manufacturing 25, branched and
a chemical for use linear.
in enhanced oil
recovery
operations.
P-18-0396........... 1 09/28/2018 CBI..................... (G) Paint.......... (G) Alkenoic acid,
alkyl, polymer
with carbomonocyle
alkyl propenoate
and substituted
alkyl alkenoate,
ester with
substituted alkyl
alkanoate, tert-
butyl substituted
peroxoate-
initiated.
P-18-0397........... 1 09/29/2018 CBI..................... (G) Additive in oil (G) Substituted
field chemicals. alkanedioic acid,
polymer with
substituted
alkanoic acid.
P-18-0398........... 1 09/29/2018 CBI..................... (S) Intermediate... (S) 1,2-
ethanediamine, n-
(1-methylethyl)-n-
[2-[(1-
methylethyl)amino]
ethyl]-.
P-18-0399........... 1 09/29/2018 CBI..................... (G) (c) Open, non- (G) Rosin adduct
dispersive use ester neutralized
additive for with amine.
industrial use
only.
P-18-0400........... 1 09/29/2018 CBI..................... (G) Open, non- (G) Rosin adduct
dispersive use, ester, neutralized
additive for with koh.
textile industry.
P-18-0401........... 1 09/29/2018 CBI..................... (G) Additive....... (S) Glycerides, c16-
18 and ci8-unsatd.
mono- and di-,
citrates.
P-18-0402........... 1 09/29/2018 CBI..................... (G) Fuel additive.. (G) Phenol,
alkanepolyolbis(he
teroalkylene)bis-,
polyalkylene
derivs..
SN-16-0013A......... 2 09/27/2018 CBI..................... (G) Surfactant..... (G) Polyfluorinated
alkyl quaternary
ammonium chloride.
SN-18-0005A......... 2 09/28/2018 CBI..................... (G) Monomer for (S) Butanoic acid,
industrial 3-mercapto-, 1,1'-
adhesives, [2-(hydroxymethyl)-
coatings and inks. 2-[(3-mercapto-1-
oxobutoxy)methyl]-
1,3-propanediyl]
ester]; (S)
Butanoic acid, 3-
mercapto-,1,1'-
[2,2-bis[(3-
mercapto-1-
oxobutoxy)methyl]-
1,3-propanediyl]
ester.
SN-18-0006A......... 2 09/20/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care .alpha.-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. .omega.-hydroxy-,
c10-16-alkyl
ethers.
SN-18-0007A......... 2 09/20/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care [iquest]-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. [iquest]-hydroxy-,
c12-16-alkyl
ethers.
SN-18-0008A......... 2 09/20/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care .alpha.-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. .omega.-hydroxy-,
c12-15-alkyl
ethers.
SN-18-0010.......... 1 09/27/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care .alpha.-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. .omega.-hydroxy-,
c10-16-alkyl
ethers.
SN-18-0011.......... 1 09/27/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care [iquest]-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. [iquest]-hydroxy-,
c12-16-alkyl
ethers.
SN-18-0012.......... 1 09/27/2018 Colonial Chemical, Inc.. (S) Wetting agent (S) Poly(oxy-1,2-
for low foam ethanediyl),
laundry, home care .alpha.-(2-methyl-
and industrial 2-propen-1-yl)-
cleaning. .omega.-hydroxy-,
c12-15-alkyl
ethers.
SN-18-0013.......... 1 09/28/2018 CBI..................... (G) Lithiated metal (G) Lithiated metal
oxide for oxide.
batteries.
SN-18-0014.......... 1 09/29/2018 Hexion, Inc............. (S) Reactive (S) Neononanoic
monomer for the acid, ethenyl
production of ester.
inks, in both
aqueous and
waterborne
systems, (S)
Reactive monomer
for the production
of paints and
coatings, in both
aqueous and
solvent systems,
(S) Reactive
monomer for the
production of
adhesives, in both
aqueous and
waterborne
systems..
----------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.
Table II--TMEs Received From 9/1/2018 to 9/30/2018
--------------------------------------------------------------------------------------------------------------------------------------------------------
Case No. Submission type Version Received date Manufacturer Use Chemical substance
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-18-0003A............. Test Marketing Exemption 3 09/06/2018 CBI.................. (G) Additive......... (G) Alkylated
Application (TMEA). diphenylamines,
homopolymers.
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 10509]]
In Table III. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC including whether the submission was an initial or amended
submission, the date the NOC was received by EPA, the date of
commencement provided by the submitter in the NOC, a notation of the
type of amendment (e.g., amendment to generic name, specific name,
technical contact information, etc.) and chemical substance identity.
Table III--NOCs Received From 9/1/2018 to 9/30/2018
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-15-0024................ 09/24/2018 09/05/2018 ....................... (G) Modified trichoderma
reesei.
J-16-0010A............... 09/24/2018 09/23/2016 Update CBI (G) Genetically modified
substantiation. saccharomyces yeast.
J-16-0019................ 09/24/2018 09/11/2018 ....................... (G) Modified trichoderma
reesei.
J-16-0020................ 09/24/2018 09/05/2018 ....................... (G) Modified trichoderma
reesei.
J-16-0025................ 09/24/2018 09/11/2018 ....................... (G) Modified trichoderma
reesei.
J-17-0001................ 09/11/2018 09/05/2018 ....................... (G) Modified saccharomyces
cerevisiae.
J-17-0004................ 09/07/2018 09/05/2018 ....................... (G) Modified saccharomyces
cerevisiae.
P-11-0432................ 09/26/2018 09/10/2018 ....................... (S)
Tricyclo[7.3.3.15,11]heptas
iloxane-3,7,14-
triol,1,3,5,7,9,11,14-
heptaisooctyl-,
stereoisomer.
P-13-0051................ 09/06/2018 09/06/2018 ....................... (G) Fatty acid amide.
P-14-0015................ 09/06/2018 09/06/2018 ....................... (G) Fatty acid amide.
P-14-0098A............... 09/18/2018 10/15/2016 Re-substantiating all (G) Polyalkylene polymer,
CBI claims to comply anhydride reaction
with the Chemical products, imidated.
Safety for the 21st
Century Act.
P-14-0269A............... 09/07/2018 06/09/2014 The cover letter has (S) Methanone, bis(4-
been amended to fluorophenyl)-, polymer
clarify certain with 1,4-benzenediol and
language which was [1,1'--biphenyl]-4,4'-diol.
unintentionally
misleading.
P-14-0347................ 09/27/2018 09/13/2018 ....................... (G) Isocyanic acid,
polymethylenepolyphenylene
ester, polymer with .alpha.-
hydro-.omega.-
hydroxypolyether and
.alpha., alpha.'-
[(alkylimino)di-2,1-
ethanediyl]bis[.omega.-
hydroxypolyether], acetate
(salt) sulfamate (salt).
P-14-0496................ 09/24/2018 09/13/2018 ....................... (G) Polyphosphoric acids, 2-
[(alkyl1-oxo-2-propen-1-
yl)oxy]ethyl esters,
compds. with n-
(aminoiminomethyl)urea,
polymers with bu acrylate,
n-(hydroxymethyl)-
propenamide and styrene.
P-15-0150................ 09/20/2018 09/20/2018 ....................... (G) Cyclohexanedicarboxylic
acid, dialkyl ester.
P-16-0117A............... 09/25/2018 10/21/2016 Amending the form to (S) Magnesium hydroxide
include CBI hypochlorite oxide.
substantiation, in
response to a notice
of deficiency, and
adding the CASRN to
the NOC.
P-16-0331................ 09/13/2018 09/10/2018 ....................... (G) Hydroxy functional
triglyceride polymer with
glycerol mono-ester and
1,1'-
methylenebis[isocyanatobenz
ene].
P-17-0007................ 09/27/2018 09/20/2018 ....................... (G) Alkyl substituted-dioxa
thio substituted-ether
diene,.
P-17-0049................ 09/11/2018 08/17/2018 ....................... (G) Haloalkyl substituted
carbomonocycle.
P-17-0172................ 09/18/2018 09/13/2018 ....................... (G) Branched alkylphenol,
sulfurized, calcium salts,
overbased.
P-18-0051................ 09/06/2018 09/06/2018 ....................... (G) Alkenoic acid, reaction
products with
[oxybis(alkylene)]bis[(subs
tituted alkyl)-alkanediol],
polymers with
isocyanatoalkane and
substituted alkanoic acid,
substituted monoacrylate
alkanoate-blocked.
P-18-0142................ 09/27/2018 09/23/2018 ....................... (G) Alkenoic acid, alkyl-,
alkyl ester, polymer with
substituted alkenoates,
alkenoic acid, alkyl
peroxoate-initiated.
P-87-0910................ 09/07/2018 04/14/2009 ....................... (S) 2-cyclopentene-1-acetic
acid, alpha allyl, ethyl
ester*.
----------------------------------------------------------------------------------------------------------------
In Table IV. of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information received by EPA during this time period: The EPA case
number assigned to the test information; the date the test information
was received by EPA, the type of test information submitted, and
chemical substance identity.
Table IV--Test Information Received from 9/1/2018 to 9/30/2018
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-15-0583............... 9/7/2018 Bioaccumulation in Fish: (G) butanedioic acid, alkyl amine,
Aqueous and Dietary dimethylbutyl ester.
Exposure (OECD 305).
[[Page 10510]]
P-17-0283............... 9/11/2018 Local Lymph Node Assay in (G) Arenesulfonic acid, alkyl
Mice (LLNA) (OECD 406). derivatives, metal salts.
P-18-0094............... 9/11/2018 Particle size analysis..... (G)
pentacyclo[9.5.1.13,9.15,15.17,13]octasi
loxanealkylsubstituted, 3,5,7,9,11,13,15-
heptakis(polyfluoroalkyl)-.
P-18-0140............... 9/9/2018 In Vitro Mammalian (G) methyl modified lactam.
Chromosome Aberration Test
(OECD 473), Skin
sensitization (DEREK
modeling), Fish Acute
Toxicity Study (OECD 203),
Activated Sludge,
Respiration Inhibition
Test (Carbon and Ammonium
Oxidation) (OECD 209),
Validation of Analytical
Procedures: Text and
Methodology (ICH
Harmonised Tripartite
Guideline Q2).
P-18-0141............... 9/9/2018 In Vitro Mammalian (G) ethyl modified lactam.
Chromosome Aberration Test
(OECD 473), ``Activated
Sludge, Respiration
Inhibition Test (Carbon
and Ammonium Oxidation)
(OECD 209), Skin
sensitization (DEREK
modeling).
P-18-0150............... 9/12/2018 Developmental Toxicity (G) tertiary amine, compounds with amino
Study in Rats After sulfonic acid blocked aliphatic
Inhalation. isocyanate homopolymer.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: March 14, 2019.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2019-05376 Filed 3-20-19; 8:45 am]
BILLING CODE 6560-50-P