Regulations and Procedures Technical Advisory Committee; Meeting Notice, 9485 [2019-04869]
Download as PDF
<![CDATA[
amozie on DSK9F9SC42PROD with NOTICES
Federal Register / Vol. 84, No. 51 / Friday, March 15, 2019 / Notices
various steel components (nut; pin;
rivet); various steel/aluminum
components (two-way bracket; bracket;
frame bracket; mounting clamp bracket;
roller bracket; shield bracket); steel
sheet and coil; stud biter; tin plated
copper; and, weld nut (duty rate ranges
from duty-free to 5.3%). The request
indicates that the following components
are subject to an antidumping/
countervailing duty (AD/CVD) order/
investigation if imported from certain
countries: Aluminized steel sheet and
coil; aluminum sheet; cold rolled steel
sheet and coil; galvanized steel sheet
and coil; high strength low alloy steel;
hot rolled pickled/oiled steel sheet and
coil; hot rolled steel sheet and coil;
various iron/steel components (clinch
stud; hinge; hinge butt; hinge pin);
stainless steel bars and rods; stainless
steel sheet and oil; steel rivet; various
steel/aluminum components (two-way
bracket; bracket; frame bracket;
mounting clamp bracket; roller bracket;
shield bracket); steel sheet and coil; and,
stud biter. The FTZ Board’s regulations
(15 CFR 400.14(e)) require that
merchandise subject to AD/CVD orders,
or items which would be otherwise
subject to suspension of liquidation
under AD/CVD procedures if they
entered U.S. customs territory, be
admitted to the zone in privileged
foreign status (19 CFR 146.41). The
request also indicates that certain
materials/components are subject to
special duties under Section 232 of the
Trade Expansion Act of 1962 (Section
232) or Section 301 of the Trade Act of
1974 (Section 301), depending on the
country of origin. The applicable
Section 232 and Section 301 decisions
require subject merchandise to be
admitted to FTZs in privileged foreign
status.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
24, 2019.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov
or 202–482–1378.
VerDate Sep<11>2014
16:53 Mar 14, 2019
Jkt 247001
Dated: March 11, 2019.
Andrew McGilvray,
Executive Secretary.
Agenda
Public Session
[FR Doc. 2019–04878 Filed 3–14–19; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[S–218–2018]
Approval of Subzone Status adidas
America, Inc. Wilkes-Barre,
Pennsylvania
On December 4, 2018, the Executive
Secretary of the Foreign-Trade Zones
(FTZ) Board docketed an application
submitted by the Eastern Distribution
Center, Inc., grantee of FTZ 24,
requesting subzone status subject to the
existing activation limit of FTZ 24, on
behalf of adidas America, Inc., in
Wilkes-Barre, Pennsylvania.
The application was processed in
accordance with the FTZ Act and
Regulations, including notice in the
Federal Register inviting public
comment (83 FR 63613, December 11,
2018). The FTZ staff examiner reviewed
the application and determined that it
meets the criteria for approval. Pursuant
to the authority delegated to the FTZ
Board Executive Secretary (15 CFR Sec.
400.36(f)), the application to establish
Subzone 24F was approved on March
12, 2019, subject to the FTZ Act and the
Board’s regulations, including Section
400.13, and further subject to FTZ 24’s
2,000-acre activation limit.
Dated: March 12, 2019.
Andrew McGilvray,
Executive Secretary.
BILLING CODE 3510–DS–P
Bureau of Industry and Security
Regulations and Procedures Technical
Advisory Committee; Meeting Notice
The Regulations and Procedures
Technical Advisory Committee (RPTAC)
will meet April 2, 2019, 9:00 a.m., Room
3884, in the Herbert C. Hoover Building,
14th Street between Constitution and
Pennsylvania Avenues NW,
Washington, DC The Committee advises
the Office of the Assistant Secretary for
Export Administration on
implementation of the Export
Administration Regulations (EAR) and
provides for continuing review to
update the EAR as needed.
Fmt 4703
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2019–04869 Filed 3–14–19; 8:45 am]
BILLING CODE 3510–JT–P
International Trade Administration
[C–570–968]
DEPARTMENT OF COMMERCE
Frm 00010
1. Opening remarks by the Chairman.
2. Opening remarks by Bureau of
Industry and Security.
3. Presentation of papers or comments
by the Public.
4. Export Enforcement update.
5. Regulations update.
6. Working group reports.
7. Automated Export System (AES)
update.
The open session will be accessible
via teleconference to 20 participants on
a first come, first serve basis. To join the
conference, submit inquiries to Ms.
Yvette Springer at Yvette.Springer@
bis.doc.gov no later than March 26,
2019.
A limited number of seats will be
available for the public session.
Reservations are not accepted. To the
extent that time permits, members of the
public may present oral statements to
the Committee. The public may submit
written statements at any time before or
after the meeting. However, to facilitate
the distribution of public presentation
materials to the Committee members,
the Committee suggests that presenters
forward the public presentation
materials prior to the meeting to Ms.
Springer via email.
For more information, call Yvette
Springer at (202) 482–2813.
DEPARTMENT OF COMMERCE
[FR Doc. 2019–04879 Filed 3–14–19; 8:45 am]
PO 00000
9485
Sfmt 4703
Aluminum Extrusions From the
People’s Republic of China:
Preliminary Results of Countervailing
Duty Administrative Review and Intent
To Rescind, in Part; 2017
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) preliminarily determines
that countervailable subsidies have been
provided to producers and exporters of
aluminum extrusions from the People’s
Republic of China (China) for the period
of review (POR) January 1, 2017 through
December 31, 2017. Interested parties
are invited to comment on these
preliminary results.
DATES: Applicable March 15, 2019.
AGENCY:
E:\FR\FM\15MRN1.SGM
15MRN1
]]>Agencies
[Federal Register Volume 84, Number 51 (Friday, March 15, 2019)]
[Notices]
[Page 9485]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-04869]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
Regulations and Procedures Technical Advisory Committee; Meeting
Notice
The Regulations and Procedures Technical Advisory Committee (RPTAC)
will meet April 2, 2019, 9:00 a.m., Room 3884, in the Herbert C. Hoover
Building, 14th Street between Constitution and Pennsylvania Avenues NW,
Washington, DC The Committee advises the Office of the Assistant
Secretary for Export Administration on implementation of the Export
Administration Regulations (EAR) and provides for continuing review to
update the EAR as needed.
Agenda
Public Session
1. Opening remarks by the Chairman.
2. Opening remarks by Bureau of Industry and Security.
3. Presentation of papers or comments by the Public.
4. Export Enforcement update.
5. Regulations update.
6. Working group reports.
7. Automated Export System (AES) update.
The open session will be accessible via teleconference to 20
participants on a first come, first serve basis. To join the
conference, submit inquiries to Ms. Yvette Springer at
Yvette.Springer@bis.doc.gov no later than March 26, 2019.
A limited number of seats will be available for the public session.
Reservations are not accepted. To the extent that time permits, members
of the public may present oral statements to the Committee. The public
may submit written statements at any time before or after the meeting.
However, to facilitate the distribution of public presentation
materials to the Committee members, the Committee suggests that
presenters forward the public presentation materials prior to the
meeting to Ms. Springer via email.
For more information, call Yvette Springer at (202) 482-2813.
Yvette Springer,
Committee Liaison Officer.
[FR Doc. 2019-04869 Filed 3-14-19; 8:45 am]
BILLING CODE 3510-JT-P
