Airworthiness Directives; The Boeing Company Airplanes, 7264-7266 [2019-03407]

Download as PDF 7264 Federal Register / Vol. 84, No. 42 / Monday, March 4, 2019 / Rules and Regulations by the Manager, International Section, Transport Standards Branch, FAA; or the European Aviation Safety Agency (EASA); or Fokker Services B.V.’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature. (o) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA AD 2018–0015, dated January 25, 2018, for related information. This MCAI may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2018–0956. (2) For more information about this AD, contact Tom Rodriguez, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206– 231–3226. (3) Dowty Aerospace Landing Gear service information identified in this AD, and not incorporated by reference, is available from Safran Landing Systems, One Carbon Way, Walton, KY 41094; telephone (859) 525– 8583; fax (859) 485–8827. (p) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) Fokker Service Bulletin SBF27–32–173, dated November 30, 2017. (ii) [Reserved] (3) For Fokker service information identified in this AD, contact Fokker Services B.V., Technical Services Dept., P.O. Box 1357, 2130 EL Hoofddorp, the Netherlands; telephone +31 (0)88–6280–350; fax +31 (0)88–6280–111; email technicalservices@ fokker.com; internet https:// www.myfokkerfleet.com. (4) You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: https:// www.archives.gov/federal-register/cfr/ibrlocations.html. Issued in Des Moines, Washington, on February 14, 2019. Michael Kaszycki, Acting Director, System Oversight Division, Aircraft Certification Service. [FR Doc. 2019–03267 Filed 3–1–19; 8:45 am] BILLING CODE 4910–13–P VerDate Sep<11>2014 16:21 Mar 01, 2019 Jkt 247001 DEPARTMENT OF TRANSPORTATION 1200 New Jersey Avenue SE, Washington, DC 20590. Federal Aviation Administration FOR FURTHER INFORMATION CONTACT: 14 CFR Part 39 [Docket No. FAA–2018–0959; Product Identifier 2018–NM–123–AD; Amendment 39–19576; AD 2019–03–24] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Final rule. AGENCY: We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737–400 series airplanes. This AD was prompted by reports of cracking in the splice plate on the lower sill of the overwing emergency exit doors. This AD requires repetitive inspections for such cracking and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products. DATES: This AD is effective April 8, 2019. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 8, 2019. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2018– 0959. SUMMARY: Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2018– 0959; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations (phone: 800–647–5527) is U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, PO 00000 Frm 00004 Fmt 4700 Sfmt 4700 James Guo, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712–4137; phone: 562–627–5357; fax: 562–627– 5210; email: james.guo@faa.gov. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 737–400 series airplanes. The NPRM published in the Federal Register on November 8, 2018 (83 FR 55828). The NPRM was prompted by reports of cracking in the splice plate on the lower sill of the overwing emergency exit doors. The NPRM proposed to require repetitive inspections for such cracking and applicable on-condition actions. We are issuing this AD to address cracking in the splice plate, which, if not addressed, could result in the inability of a principal structural element to sustain limit loads and possible rapid decompression of the fuselage. Comments We gave the public the opportunity to participate in developing this final rule. We have considered the comments received. Boeing indicated no objection to the NPRM. Commenters Zack Jones and Josep Clapes stated their support for the NPRM. Conclusion We reviewed the relevant data, considered the comments received, and determined that air safety and the public interest require adopting this final rule as proposed, except for minor editorial changes. We have determined that these minor changes: • Are consistent with the intent that was proposed in the NPRM for addressing the unsafe condition; and • Do not add any additional burden upon the public than was already proposed in the NPRM. Related Service Information Under 1 CFR Part 51 We reviewed Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018. This service information describes procedures for repetitive high frequency eddy current inspections for cracking in the splice plate on the lower sill of the overwing emergency exit doors and applicable oncondition actions. This service information is reasonably available E:\FR\FM\04MRR1.SGM 04MRR1 Federal Register / Vol. 84, No. 42 / Monday, March 4, 2019 / Rules and Regulations because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. Costs of Compliance 7265 the following costs to comply with this AD: We estimate that this AD affects 85 airplanes of U.S. registry. We estimate ESTIMATED COSTS FOR REQUIRED ACTIONS Action Labor cost Repetitive inspections ... 2 work-hours × $85 per hour = $170 per inspection cycle. We estimate the following costs to do any necessary on-condition actions that would be required. We have no way of Parts cost Cost per product $0 $170 per inspection cycle. Cost on U.S. operators $14,450 per inspection cycle. determining the number of aircraft that might need these on-condition actions: ESTIMATED COSTS OF ON-CONDITION ACTIONS Labor cost Parts cost Up to 18 work-hours × $85 per hour = $1,530 ................................................... Up to $7,646 ........................................ Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. This AD is issued in accordance with authority delegated by the Executive Director, Aircraft Certification Service, as authorized by FAA Order 8000.51C. In accordance with that order, issuance of ADs is normally a function of the Compliance and Airworthiness Division, but during this transition period, the Executive Director has delegated the authority to issue ADs applicable to transport category airplanes and associated appliances to the Director of the System Oversight Division. Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national VerDate Sep<11>2014 16:21 Mar 01, 2019 Jkt 247001 government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify that this AD: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Is not a ‘‘significant rule’’ under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska, and (4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. Cost per product Up to $9,176. (a) Effective Date This AD is effective April 8, 2019. (b) Affected ADs None. (c) Applicability This AD applies to The Boeing Company Model 737–400 series airplanes, certificated in any category, line numbers 1487 through 3132 inclusive. (d) Subject Air Transport Association (ATA) of America Code 53, Fuselage. (e) Unsafe Condition Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. This AD was prompted by reports of cracking in the splice plate on the lower sill of the overwing emergency exit doors. We are issuing this AD to address cracking in the splice plate, which, if not addressed, could result in the inability of a principal structural element to sustain limit loads and possible rapid decompression of the fuselage. Adoption of the Amendment (f) Compliance Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows: Comply with this AD within the compliance times specified, unless already done. PART 39—AIRWORTHINESS DIRECTIVES Except as specified by paragraph (h) of this AD: At the applicable times specified in the ‘‘Compliance’’ paragraph of Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018. Note 1 to paragraph (g) of this AD: Guidance for accomplishing the actions required by this AD can be found in Boeing Alert Service Bulletin 737–53A1380, dated July 18, 2018, which is referred to in Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018. List of Subjects in 14 CFR Part 39 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ 2019–03–24 The Boeing Company: Amendment 39–19576; Docket No. FAA–2018–0959; Product Identifier 2018–NM–123–AD. PO 00000 Frm 00005 Fmt 4700 Sfmt 4700 (g) Required Actions E:\FR\FM\04MRR1.SGM 04MRR1 7266 Federal Register / Vol. 84, No. 42 / Monday, March 4, 2019 / Rules and Regulations (h) Exceptions to Service Information Specifications (1) For purposes of determining compliance with the requirements of this AD: Where Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018, uses the phrase ‘‘the original issue date of Requirements Bulletin 737–53A1380 RB,’’ this AD requires using ‘‘the effective date of this AD.’’ (2) Where Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018, specifies contacting Boeing for repair instructions: This AD requires doing the repair and applicable on-condition actions before further flight using a method approved in accordance with the procedures specified in paragraph (i) of this AD. (i) Alternative Methods of Compliance (AMOCs) (1) The Manager, Los Angeles ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (j)(1) of this AD. Information may be emailed to: 9ANM-LAACO-AMOC-Requests@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (3) An AMOC that provides an acceptable level of safety may be used for any repair, modification, or alteration required by this AD if it is approved by the Boeing Commercial Airplanes Organization Designation Authorization (ODA) that has been authorized by the Manager, Los Angeles ACO Branch, FAA, to make those findings. To be approved, the repair method, modification deviation, or alteration deviation must meet the certification basis of the airplane, and the approval must specifically refer to this AD. (ii) [Reserved] (3) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; internet https:// www.myboeingfleet.com. (4) You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: https:// www.archives.gov/federal-register/cfr/ibrlocations.html. Issued in Des Moines, Washington, on February 19, 2019. Dionne Palermo, Acting Director, System Oversight Division, Aircraft Certification Service. [FR Doc. 2019–03407 Filed 3–1–19; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2016–9189; Product Identifier 2016–NM–114–AD; Amendment 39–19578; AD 2019–03–26] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Final rule. AGENCY: We are adopting a new airworthiness directive (AD) for certain (j) Related Information The Boeing Company Model 737–600, (1) For more information about this AD, –700, –700C, -800, -900, and –900ER contact James Guo, Aerospace Engineer, series airplanes. This AD was prompted Airframe Section, FAA, Los Angeles ACO by reports of passenger service units Branch, 3960 Paramount Boulevard, Lakewood, CA 90712–4137; phone: 562–627– (PSUs) becoming detached from the supporting airplane structure in several 5357; fax: 562–627–5210; email: james.guo@ Model 737 series airplanes. This AD faa.gov. (2) Service information identified in this requires modifying the PSUs and life AD that is not incorporated by reference is vest panels by replacing the existing available at the addresses specified in inboard lanyard and installing two new paragraphs (k)(3) and (k)(4) of this AD. lanyards on the outboard edge of the PSUs and life vest panels; measuring the (k) Material Incorporated by Reference distance between the hooks of the (1) The Director of the Federal Register torsion spring of the lanyard assembly; approved the incorporation by reference replacing discrepant lanyard assemblies; (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR and re-identifying serviceable lanyard part 51. assemblies. We are issuing this AD to (2) You must use this service information address the unsafe condition on these as applicable to do the actions required by products. this AD, unless the AD specifies otherwise. DATES: This AD is effective April 8, (i) Boeing Alert Requirements Bulletin 737–53A1380 RB, dated July 18, 2018. 2019. VerDate Sep<11>2014 16:21 Mar 01, 2019 Jkt 247001 SUMMARY: PO 00000 Frm 00006 Fmt 4700 Sfmt 4700 The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 8, 2019. ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110 SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; internet https://www.myboeingfleet.com. You may view this service information at the FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2016– 9189. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2016– 9189; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the regulatory evaluation, any comments received, and other information. The address for Docket Operations (phone: 800–647–5527) is U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Scott Craig, Aerospace Engineer, Cabin Safety and Environmental Systems Section, FAA, Seattle ACO Branch, 2200 South 216th St., Des Moines, WA 98198; phone and fax: 206–231–3566; email: michael.s.craig@faa.gov. SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain The Boeing Company Model 737–600, –700, –700C, –800, -900, and –900ER series airplanes. The NPRM published in the Federal Register on October 13, 2016 (81 FR 70647). The NPRM was prompted by reports of PSUs becoming detached from the supporting airplane structure in several Model 737 series airplanes during survivable accidents. The NPRM proposed to require modifying the PSUs and life vest panels by removing the existing inboard lanyard and installing two new lanyards on the outboard edge of the PSUs and life vest panels. E:\FR\FM\04MRR1.SGM 04MRR1

Agencies

[Federal Register Volume 84, Number 42 (Monday, March 4, 2019)]
[Rules and Regulations]
[Pages 7264-7266]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-03407]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2018-0959; Product Identifier 2018-NM-123-AD; Amendment 
39-19576; AD 2019-03-24]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for certain 
The Boeing Company Model 737-400 series airplanes. This AD was prompted 
by reports of cracking in the splice plate on the lower sill of the 
overwing emergency exit doors. This AD requires repetitive inspections 
for such cracking and applicable on-condition actions. We are issuing 
this AD to address the unsafe condition on these products.

DATES: This AD is effective April 8, 2019.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of April 8, 
2019.

ADDRESSES: For service information identified in this final rule, 
contact Boeing Commercial Airplanes, Attention: Contractual & Data 
Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 
90740-5600; telephone 562-797-1717; internet https://www.myboeingfleet.com. You may view this service information at the 
FAA, Transport Standards Branch, 2200 South 216th St., Des Moines, WA. 
For information on the availability of this material at the FAA, call 
206-231-3195. It is also available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2018-
0959.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2018-
0959; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this final rule, the regulatory evaluation, any comments received, and 
other information. The address for Docket Operations (phone: 800-647-
5527) is U.S. Department of Transportation, Docket Operations, M-30, 
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: James Guo, Aerospace Engineer, 
Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount 
Boulevard, Lakewood, CA 90712-4137; phone: 562-627-5357; fax: 562-627-
5210; email: james.guo@faa.gov.

SUPPLEMENTARY INFORMATION:

Discussion

    We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR 
part 39 by adding an AD that would apply to certain The Boeing Company 
Model 737-400 series airplanes. The NPRM published in the Federal 
Register on November 8, 2018 (83 FR 55828). The NPRM was prompted by 
reports of cracking in the splice plate on the lower sill of the 
overwing emergency exit doors. The NPRM proposed to require repetitive 
inspections for such cracking and applicable on-condition actions. We 
are issuing this AD to address cracking in the splice plate, which, if 
not addressed, could result in the inability of a principal structural 
element to sustain limit loads and possible rapid decompression of the 
fuselage.

Comments

    We gave the public the opportunity to participate in developing 
this final rule. We have considered the comments received. Boeing 
indicated no objection to the NPRM. Commenters Zack Jones and Josep 
Clapes stated their support for the NPRM.

Conclusion

    We reviewed the relevant data, considered the comments received, 
and determined that air safety and the public interest require adopting 
this final rule as proposed, except for minor editorial changes. We 
have determined that these minor changes:
     Are consistent with the intent that was proposed in the 
NPRM for addressing the unsafe condition; and
     Do not add any additional burden upon the public than was 
already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

    We reviewed Boeing Alert Requirements Bulletin 737-53A1380 RB, 
dated July 18, 2018. This service information describes procedures for 
repetitive high frequency eddy current inspections for cracking in the 
splice plate on the lower sill of the overwing emergency exit doors and 
applicable on-condition actions. This service information is reasonably 
available

[[Page 7265]]

because the interested parties have access to it through their normal 
course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

    We estimate that this AD affects 85 airplanes of U.S. registry. We 
estimate the following costs to comply with this AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
                                                                                                 Cost on U.S.
             Action                     Labor cost          Parts cost     Cost per product        operators
----------------------------------------------------------------------------------------------------------------
Repetitive inspections.........  2 work-hours x $85 per               $0  $170 per            $14,450 per
                                  hour = $170 per                          inspection cycle.   inspection cycle.
                                  inspection cycle.
----------------------------------------------------------------------------------------------------------------

    We estimate the following costs to do any necessary on-condition 
actions that would be required. We have no way of determining the 
number of aircraft that might need these on-condition actions:

                                     Estimated Costs of On-Condition Actions
----------------------------------------------------------------------------------------------------------------
                Labor cost                          Parts cost                      Cost per product
----------------------------------------------------------------------------------------------------------------
Up to 18 work-hours x $85 per hour =       Up to $7,646...............  Up to $9,176.
 $1,530.
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.
    This AD is issued in accordance with authority delegated by the 
Executive Director, Aircraft Certification Service, as authorized by 
FAA Order 8000.51C. In accordance with that order, issuance of ADs is 
normally a function of the Compliance and Airworthiness Division, but 
during this transition period, the Executive Director has delegated the 
authority to issue ADs applicable to transport category airplanes and 
associated appliances to the Director of the System Oversight Division.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under DOT Regulatory Policies and 
Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska, and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

Adoption of the Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

2019-03-24 The Boeing Company: Amendment 39-19576; Docket No. FAA-
2018-0959; Product Identifier 2018-NM-123-AD.

(a) Effective Date

    This AD is effective April 8, 2019.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to The Boeing Company Model 737-400 series 
airplanes, certificated in any category, line numbers 1487 through 
3132 inclusive.

(d) Subject

    Air Transport Association (ATA) of America Code 53, Fuselage.

(e) Unsafe Condition

    This AD was prompted by reports of cracking in the splice plate 
on the lower sill of the overwing emergency exit doors. We are 
issuing this AD to address cracking in the splice plate, which, if 
not addressed, could result in the inability of a principal 
structural element to sustain limit loads and possible rapid 
decompression of the fuselage.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Actions

    Except as specified by paragraph (h) of this AD: At the 
applicable times specified in the ``Compliance'' paragraph of Boeing 
Alert Requirements Bulletin 737-53A1380 RB, dated July 18, 2018, do 
all applicable actions identified in, and in accordance with, the 
Accomplishment Instructions of Boeing Alert Requirements Bulletin 
737-53A1380 RB, dated July 18, 2018.

    Note 1 to paragraph (g) of this AD:  Guidance for accomplishing 
the actions required by this AD can be found in Boeing Alert Service 
Bulletin 737-53A1380, dated July 18, 2018, which is referred to in 
Boeing Alert Requirements Bulletin 737-53A1380 RB, dated July 18, 
2018.


[[Page 7266]]



(h) Exceptions to Service Information Specifications

    (1) For purposes of determining compliance with the requirements 
of this AD: Where Boeing Alert Requirements Bulletin 737-53A1380 RB, 
dated July 18, 2018, uses the phrase ``the original issue date of 
Requirements Bulletin 737-53A1380 RB,'' this AD requires using ``the 
effective date of this AD.''
    (2) Where Boeing Alert Requirements Bulletin 737-53A1380 RB, 
dated July 18, 2018, specifies contacting Boeing for repair 
instructions: This AD requires doing the repair and applicable on-
condition actions before further flight using a method approved in 
accordance with the procedures specified in paragraph (i) of this 
AD.

(i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Los Angeles ACO Branch, FAA, has the authority 
to approve AMOCs for this AD, if requested using the procedures 
found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your 
request to your principal inspector or local Flight Standards 
District Office, as appropriate. If sending information directly to 
the manager of the certification office, send it to the attention of 
the person identified in paragraph (j)(1) of this AD. Information 
may be emailed to: 9-ANM-LAACO-AMOC-Requests@faa.gov.
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair, modification, or alteration required by this AD 
if it is approved by the Boeing Commercial Airplanes Organization 
Designation Authorization (ODA) that has been authorized by the 
Manager, Los Angeles ACO Branch, FAA, to make those findings. To be 
approved, the repair method, modification deviation, or alteration 
deviation must meet the certification basis of the airplane, and the 
approval must specifically refer to this AD.

(j) Related Information

    (1) For more information about this AD, contact James Guo, 
Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 
3960 Paramount Boulevard, Lakewood, CA 90712-4137; phone: 562-627-
5357; fax: 562-627-5210; email: james.guo@faa.gov.
    (2) Service information identified in this AD that is not 
incorporated by reference is available at the addresses specified in 
paragraphs (k)(3) and (k)(4) of this AD.

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Boeing Alert Requirements Bulletin 737-53A1380 RB, dated 
July 18, 2018.
    (ii) [Reserved]
    (3) For service information identified in this AD, contact 
Boeing Commercial Airplanes, Attention: Contractual & Data Services 
(C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-
5600; telephone 562-797-1717; internet https://www.myboeingfleet.com.
    (4) You may view this service information at the FAA, Transport 
Standards Branch, 2200 South 216th St., Des Moines, WA. For 
information on the availability of this material at the FAA, call 
206-231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, call 202-741-6030, or go to: https://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Des Moines, Washington, on February 19, 2019.
Dionne Palermo,
Acting Director, System Oversight Division, Aircraft Certification 
Service.
[FR Doc. 2019-03407 Filed 3-1-19; 8:45 am]
 BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.