Established Conditions; Pilot Program, 4478-4479 [2019-02364]
Download as PDF
4478
Federal Register / Vol. 84, No. 32 / Friday, February 15, 2019 / Notices
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2018–N–4414]
Established Conditions; Pilot Program
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice.
The Food and Drug
Administration (FDA or Agency), Center
for Drug Evaluation and Research
(CDER) is announcing the opportunity
for a limited number of applicants to
participate in an Established Conditions
Pilot Program, to propose explicit
established conditions (ECs) as part of
an original new drug application (NDA),
abbreviated new drug application
(ANDA), biologics license application
(BLA), or as a prior approval
supplement (PAS) to any of these. The
concept of ECs was first described in the
FDA draft guidance for industry entitled
‘‘Established Conditions: Reportable
CMC Changes for Approved Drug and
Biologic Products’’, issued May 2015
and has been further discussed in the
International Council for Harmonisation
(ICH) draft guidance for industry
entitled ‘‘Q12 Technical and Regulatory
Considerations for Pharmaceutical
Product Lifecycle Management;
International Council for
Harmonisation’’, issued May 30, 2018.
FDA is implementing this pilot program
to gain experience receiving, assessing,
and engaging with applicants regarding
proposed ECs (i.e., explicit ECs).
DATES: FDA will accept nine requests
submitted before May 30, 2019 from
applicants intending to submit NDAs,
ANDAs, or BLAs, either original
applications or prior approval
supplements, with proposed ECs.
FOR FURTHER INFORMATION CONTACT:
Ashley Boam, Center for Drug
Evaluation and Research, Food and
Drug Administration, 10903 New
Hampshire Ave. Silver Spring, MD
20993, 301–796–6341, CDER–OPQInquiries@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:
khammond on DSKBBV9HB2PROD with NOTICES
I. Background
The concept of ECs was first
described in the FDA draft guidance for
industry entitled ‘‘Established
Conditions: Reportable CMC Changes
for Approved Drug and Biologic
Products’’ (hereafter, ‘‘FDA guidance’’)
issued May 2015 (80 FR 31050) and has
been further discussed in the ICH draft
guidance for industry entitled ‘‘Q12
Technical and Regulatory
VerDate Sep<11>2014
19:41 Feb 14, 2019
Jkt 247001
Considerations for Pharmaceutical
Product Lifecycle Management;
International Council for
Harmonisation’’, (hereafter ‘‘ICH Q12
guidance’’) issued May 30, 2018 (83 FR
25018).
The regulations at §§ 314.50(d)(1),
314.54(a)(1), and 314.94(a)(9) (21 CFR
314.50(d)(1), 314.54(a)(1), and
314.94(a)(9)) require that any NDA or
ANDA submitted to the Agency contain
a chemistry, manufacturing, and
controls (CMC) section that describes
information such as the composition of
the drug product, manufacture of the
drug substance, and manufacture of the
drug product. Similarly, under § 601.2
(21 CFR 601.2), applicants submitting
BLAs must also provide relevant CMC
information, such as a full description
of manufacturing methods and data
establishing stability of the product
through the dating period.
All changes after approval of an
application must be managed and
executed in conformance with current
good manufacturing practice (CGMP),
although §§ 314.70(a) and 601.12(a) only
require a subset of changes to be
reported to the FDA. Sections
314.70(a)(1)(i) and 314.97 require that,
other than the exceptions or alternatives
provided in § 314.70(a)(1)(ii), an
applicant notify FDA about each change
in each condition established in an
approved NDA or ANDA beyond the
variations already provided for in the
approved application. Per § 601.12(a)(1),
an applicant must inform FDA about
each change in the product, production
process, quality controls, equipment,
facilities, responsible personnel, or
labeling established in the approved
BLA.
After approval of an application,
applicants desiring to make changes to
this CMC information must evaluate the
changes in the context of the regulations
to determine if there is a need to report
the change and associated supporting
data and justifications to FDA. Although
the reporting mechanism for many CMC
changes has been made clear through
publication of various guidance
documents, FDA issued its draft
guidance on ECs due to concern that
there is confusion regarding which
elements of an application are
considered to be ECs. This confusion
could have a negative impact on change
management activities and could
discourage continual improvement in
product manufacturing processes, lead
to unnecessary submission of
postapproval supplements to FDA for
changes that could be managed solely
by a manufacturer’s Pharmaceutical
Quality System, or, upon inspection,
lead to Form FDA 483 observations for
PO 00000
Frm 00047
Fmt 4703
Sfmt 4703
changes that should have been reported
to FDA. Moreover, a better
understanding of which elements of the
CMC information constitute ECs to FDA,
and where in an application these
elements are generally expected to be
described, could allow for a more
effective postapproval submission
strategy (e.g., effective use of risk
management principles in ICH Q9
‘‘Quality Risk Management,’’ and
knowledge management as defined in
ICH Q10 ‘‘Pharmaceutical Quality
System’’) by the regulated industry.
In the FDA draft guidance, ECs are
defined as the description of the
product, manufacturing process,
facilities and equipment, and elements
of the associated control strategy, as
defined in an application, that assure
process performance and quality of an
approved product. Changes to the ECs
must be reported to FDA (§§ 314.70 and
601.12). This definition is consistent
with the ICH Q12 guidance, which
states that ‘‘ECs are legally binding
information (or approved matters)
considered necessary to assure product
quality. Consequently, any change to
ECs necessitates a submission to the
regulatory authority.’’
Although each application submitted
to the Agency contains ECs, as
described in §§ 314.70(a) and 601.12(a),
FDA has not specifically indicated the
applicable ECs for each application at
the time of approval. In addition, the
draft ICH Q12 guidance describes how
an applicant can specifically identify
and propose so-called ‘‘explicit’’ ECs in
which the EC itself or the reporting
category for the EC, if changed, differs
from existing requirements as described
in regulations and guidance. Such
explicit ECs should be supported by an
appropriate justification that takes into
consideration the applicant’s
development approach and risk to
product quality. FDA recognizes that
this process will be new for both
applicants and Agency staff. Therefore,
FDA is proposing this pilot program.
II. Objectives
The objectives of this pilot program
are to gain practical experience in:
• Assessing proposed ECs (i.e.,
explicit ECs);
• engaging with applicants during the
review cycle to refine proposed ECs;
• ensuring assessment decisions are
made without negatively impacting the
ability to meet user fee timeframes; and
• identifying agreed-upon ECs at the
time of approval.
FDA further encourages applicants
who are accepted into this pilot program
to pursue pre-submission meetings (preNDA, pre-BLA, or pre-ANDA, where
E:\FR\FM\15FEN1.SGM
15FEN1
Federal Register / Vol. 84, No. 32 / Friday, February 15, 2019 / Notices
khammond on DSKBBV9HB2PROD with NOTICES
appropriate) through existing
mechanisms. See, for example, FDA
draft guidances entitled ‘‘Formal
Meetings Between the FDA and
Sponsors or Applicants of PDUFA
Products and Formal Meetings Between
the FDA and Sponsors or Applicants of
BsUFA Products’’ (once final, these
guidance documents will represent
FDA’s current thinking on these topics)
to improve the likelihood that a list of
agreed-upon ECs can be reached prior to
application approval. Although FDA’s
Center for Biologics Evaluation and
Research (CBER) is not participating in
this pilot, CBER intends to leverage
CDER’s experience from the pilot as
CBER assesses explicit ECs in future
submissions.
III. Requests To Participate
Parties who have an interest in
participating in this Established
Conditions Pilot Program and who plan
to propose explicit ECs in an upcoming
marketing application should submit a
written request to the CDER-OPQInquiries@fda.hhs.gov mailbox. The
request should specify the request to
participate in the Established
Conditions Pilot Program.
The request should also include the
following items:
1. The contact person’s name,
company name, and company contact
information.
2. The proposed application type
(NDA, ANDA, BLA; original or
supplement).
3. The established name of the
proposed product and a brief
description (e.g., dosage form,
indication).
4. Plans for any pre-NDA, pre-BLA, or
pre-ANDA meetings to take place prior
to application submission. Requests for
such meetings should follow previously
established procedures as outlined in
relevant guidance documents.
5. Expected timing for submission of
the application. The submission should
be planned for receipt by FDA no later
than July 1, 2019.
6. Acknowledgement that
participation in the pilot program may
be discontinued if the manufacturing
facilities named in the application are
not in a state of compliance with CGMP
at the time of the application
submission.
We intend to accept nine requests that
meet the criteria above and represent a
variety of application types, as Agency
resources allow. FDA expects to notify
companies of its decision regarding
acceptance into the pilot program in
writing within 60 days of receipt of the
request. Although incomplete and/or
unclear requests will generally be
VerDate Sep<11>2014
19:41 Feb 14, 2019
Jkt 247001
denied, FDA may contact the applicant
to request additional information.
FDA intends to accept requests to
participate starting on the date of
publication of this notice.
IV. Paperwork Reduction Act of 1995
This notice refers to previously
approved collections of information
found in FDA regulations. These
collections of information are subject to
review by the Office of Management and
Budget (OMB) under the Paperwork
Reduction Act of 1995 (44 U.S.C. 3501–
3520).
The collections of information in 21
CFR part 314 for submitting NDAs and
ANDAs have been approved under OMB
control number 0910–0001, and the
collections of information in 21 CFR
part 601 for submitting BLAs has been
approved under OMB control number
0910–0338.
FDA also has OMB approval under
control number 0910–0429 for
submissions under the guidance for
industry entitled ‘‘Formal Meetings
Between the FDA and Sponsors or
Applicants,’’ and under the guidance for
industry ‘‘Controlled Correspondence
Related to Generic Drug Development’’
(OMB control number 0910–0797).
V. References
The following references are on
display in the Dockets Management
Staff (see ADDRESSES) and are available
for viewing by interested persons
between 9 a.m. and 4 p.m., Monday
through Friday; these are also available
electronically at https://
www.regulations.gov. FDA verified the
website addresses, as of the date this
document publishes in the Federal
Register, but websites are subject to
change over time.
1. FDA draft guidance for industry entitled
‘‘Established Conditions: Reportable
CMC Changes for Approved Drug and
Biologic Products’’ (May 2015), available
at https://www.fda.gov/downloads/
drugs/guidancecomplianceregulatory
information/guidances/ucm448638.pdf.
2. FDA draft guidance for industry entitled
‘‘ICH Q12 Technical and Regulatory
Considerations for Pharmaceutical
Product Lifecycle Management’’ (May
2018), available at https://www.fda.gov/
downloads/Drugs/GuidanceCompliance
RegulatoryInformation/Guidances/UCM
609205.pdf.
3. FDA draft guidance for industry entitled
‘‘Formal Meetings Between the FDA and
Sponsors or Applicants for PDUFA
Products’’ (December 2017), available at
https://www.fda.gov/downloads/Drugs/
GuidanceComplianceRegulatory
Information/Guidances/UCM590547.pdf.
4. FDA draft guidance for industry entitled
‘‘Formal Meetings Between the FDA and
Sponsors or Applicants of BsUFA
PO 00000
Frm 00048
Fmt 4703
Sfmt 4703
4479
Products’’ (June 2018), available at
https://www.fda.gov/downloads/Drugs/
GuidanceComplianceRegulatory
Information/Guidances/UCM609662.pdf.
5. FDA draft guidance for industry entitled
‘‘Controlled Correspondence Related to
Generic Drug Development’’ (November
2017), available at https://www.fda.gov/
downloads/Drugs/GuidanceCompliance
RegulatoryInformation/Guidances/UCM
583436.pdf.
Dated: February 11, 2019.
Lowell J. Schiller,
Acting Associate Commissioner for Policy.
[FR Doc. 2019–02364 Filed 2–14–19; 8:45 am]
BILLING CODE 4164–01–P
DEPARTMENT OF HEALTH AND
HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA–2019–N–0482]
Agency Information Collection
Activities; Proposed Collection;
Comment Request; Reporting
Associated With New Animal Drug
Applications and Veterinary Master
Files
AGENCY:
Food and Drug Administration,
HHS.
ACTION:
Notice.
The Food and Drug
Administration (FDA, Agency, or we) is
announcing an opportunity for public
comment on the proposed collection of
certain information by the Agency.
Under the Paperwork Reduction Act of
1995 (PRA), Federal Agencies are
required to publish notice in the
Federal Register concerning each
proposed collection of information,
including each proposed extension of an
existing collection of information, and
to allow 60 days for public comment in
response to the notice. This notice
solicits comments on the collection of
information associated with new animal
drug applications.
DATES: Submit either electronic or
written comments on the collection of
information by April 16, 2019.
ADDRESSES: You may submit comments
as follows. Please note that late,
untimely filed comments will not be
considered. Electronic comments must
be submitted on or before April 16,
2019. The https://www.regulations.gov
electronic filing system will accept
comments until 11:59 p.m. Eastern Time
at the end of April 16, 2019. Comments
received by mail/hand delivery/courier
(for written/paper submissions) will be
considered timely if they are
postmarked or the delivery service
SUMMARY:
E:\FR\FM\15FEN1.SGM
15FEN1
Agencies
[Federal Register Volume 84, Number 32 (Friday, February 15, 2019)]
[Notices]
[Pages 4478-4479]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-02364]
[[Page 4478]]
-----------------------------------------------------------------------
DEPARTMENT OF HEALTH AND HUMAN SERVICES
Food and Drug Administration
[Docket No. FDA-2018-N-4414]
Established Conditions; Pilot Program
AGENCY: Food and Drug Administration, HHS.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Food and Drug Administration (FDA or Agency), Center for
Drug Evaluation and Research (CDER) is announcing the opportunity for a
limited number of applicants to participate in an Established
Conditions Pilot Program, to propose explicit established conditions
(ECs) as part of an original new drug application (NDA), abbreviated
new drug application (ANDA), biologics license application (BLA), or as
a prior approval supplement (PAS) to any of these. The concept of ECs
was first described in the FDA draft guidance for industry entitled
``Established Conditions: Reportable CMC Changes for Approved Drug and
Biologic Products'', issued May 2015 and has been further discussed in
the International Council for Harmonisation (ICH) draft guidance for
industry entitled ``Q12 Technical and Regulatory Considerations for
Pharmaceutical Product Lifecycle Management; International Council for
Harmonisation'', issued May 30, 2018. FDA is implementing this pilot
program to gain experience receiving, assessing, and engaging with
applicants regarding proposed ECs (i.e., explicit ECs).
DATES: FDA will accept nine requests submitted before May 30, 2019 from
applicants intending to submit NDAs, ANDAs, or BLAs, either original
applications or prior approval supplements, with proposed ECs.
FOR FURTHER INFORMATION CONTACT: Ashley Boam, Center for Drug
Evaluation and Research, Food and Drug Administration, 10903 New
Hampshire Ave. Silver Spring, MD 20993, 301-796-6341, CDER-OPQ-Inquiries@fda.hhs.gov.
SUPPLEMENTARY INFORMATION:
I. Background
The concept of ECs was first described in the FDA draft guidance
for industry entitled ``Established Conditions: Reportable CMC Changes
for Approved Drug and Biologic Products'' (hereafter, ``FDA guidance'')
issued May 2015 (80 FR 31050) and has been further discussed in the ICH
draft guidance for industry entitled ``Q12 Technical and Regulatory
Considerations for Pharmaceutical Product Lifecycle Management;
International Council for Harmonisation'', (hereafter ``ICH Q12
guidance'') issued May 30, 2018 (83 FR 25018).
The regulations at Sec. Sec. 314.50(d)(1), 314.54(a)(1), and
314.94(a)(9) (21 CFR 314.50(d)(1), 314.54(a)(1), and 314.94(a)(9))
require that any NDA or ANDA submitted to the Agency contain a
chemistry, manufacturing, and controls (CMC) section that describes
information such as the composition of the drug product, manufacture of
the drug substance, and manufacture of the drug product. Similarly,
under Sec. 601.2 (21 CFR 601.2), applicants submitting BLAs must also
provide relevant CMC information, such as a full description of
manufacturing methods and data establishing stability of the product
through the dating period.
All changes after approval of an application must be managed and
executed in conformance with current good manufacturing practice
(CGMP), although Sec. Sec. 314.70(a) and 601.12(a) only require a
subset of changes to be reported to the FDA. Sections 314.70(a)(1)(i)
and 314.97 require that, other than the exceptions or alternatives
provided in Sec. 314.70(a)(1)(ii), an applicant notify FDA about each
change in each condition established in an approved NDA or ANDA beyond
the variations already provided for in the approved application. Per
Sec. 601.12(a)(1), an applicant must inform FDA about each change in
the product, production process, quality controls, equipment,
facilities, responsible personnel, or labeling established in the
approved BLA.
After approval of an application, applicants desiring to make
changes to this CMC information must evaluate the changes in the
context of the regulations to determine if there is a need to report
the change and associated supporting data and justifications to FDA.
Although the reporting mechanism for many CMC changes has been made
clear through publication of various guidance documents, FDA issued its
draft guidance on ECs due to concern that there is confusion regarding
which elements of an application are considered to be ECs. This
confusion could have a negative impact on change management activities
and could discourage continual improvement in product manufacturing
processes, lead to unnecessary submission of postapproval supplements
to FDA for changes that could be managed solely by a manufacturer's
Pharmaceutical Quality System, or, upon inspection, lead to Form FDA
483 observations for changes that should have been reported to FDA.
Moreover, a better understanding of which elements of the CMC
information constitute ECs to FDA, and where in an application these
elements are generally expected to be described, could allow for a more
effective postapproval submission strategy (e.g., effective use of risk
management principles in ICH Q9 ``Quality Risk Management,'' and
knowledge management as defined in ICH Q10 ``Pharmaceutical Quality
System'') by the regulated industry.
In the FDA draft guidance, ECs are defined as the description of
the product, manufacturing process, facilities and equipment, and
elements of the associated control strategy, as defined in an
application, that assure process performance and quality of an approved
product. Changes to the ECs must be reported to FDA (Sec. Sec. 314.70
and 601.12). This definition is consistent with the ICH Q12 guidance,
which states that ``ECs are legally binding information (or approved
matters) considered necessary to assure product quality. Consequently,
any change to ECs necessitates a submission to the regulatory
authority.''
Although each application submitted to the Agency contains ECs, as
described in Sec. Sec. 314.70(a) and 601.12(a), FDA has not
specifically indicated the applicable ECs for each application at the
time of approval. In addition, the draft ICH Q12 guidance describes how
an applicant can specifically identify and propose so-called
``explicit'' ECs in which the EC itself or the reporting category for
the EC, if changed, differs from existing requirements as described in
regulations and guidance. Such explicit ECs should be supported by an
appropriate justification that takes into consideration the applicant's
development approach and risk to product quality. FDA recognizes that
this process will be new for both applicants and Agency staff.
Therefore, FDA is proposing this pilot program.
II. Objectives
The objectives of this pilot program are to gain practical
experience in:
Assessing proposed ECs (i.e., explicit ECs);
engaging with applicants during the review cycle to refine
proposed ECs;
ensuring assessment decisions are made without negatively
impacting the ability to meet user fee timeframes; and
identifying agreed-upon ECs at the time of approval.
FDA further encourages applicants who are accepted into this pilot
program to pursue pre-submission meetings (pre-NDA, pre-BLA, or pre-
ANDA, where
[[Page 4479]]
appropriate) through existing mechanisms. See, for example, FDA draft
guidances entitled ``Formal Meetings Between the FDA and Sponsors or
Applicants of PDUFA Products and Formal Meetings Between the FDA and
Sponsors or Applicants of BsUFA Products'' (once final, these guidance
documents will represent FDA's current thinking on these topics) to
improve the likelihood that a list of agreed-upon ECs can be reached
prior to application approval. Although FDA's Center for Biologics
Evaluation and Research (CBER) is not participating in this pilot, CBER
intends to leverage CDER's experience from the pilot as CBER assesses
explicit ECs in future submissions.
III. Requests To Participate
Parties who have an interest in participating in this Established
Conditions Pilot Program and who plan to propose explicit ECs in an
upcoming marketing application should submit a written request to the
CDER-OPQ-Inquiries@fda.hhs.gov mailbox. The request should specify the
request to participate in the Established Conditions Pilot Program.
The request should also include the following items:
1. The contact person's name, company name, and company contact
information.
2. The proposed application type (NDA, ANDA, BLA; original or
supplement).
3. The established name of the proposed product and a brief
description (e.g., dosage form, indication).
4. Plans for any pre-NDA, pre-BLA, or pre-ANDA meetings to take
place prior to application submission. Requests for such meetings
should follow previously established procedures as outlined in relevant
guidance documents.
5. Expected timing for submission of the application. The
submission should be planned for receipt by FDA no later than July 1,
2019.
6. Acknowledgement that participation in the pilot program may be
discontinued if the manufacturing facilities named in the application
are not in a state of compliance with CGMP at the time of the
application submission.
We intend to accept nine requests that meet the criteria above and
represent a variety of application types, as Agency resources allow.
FDA expects to notify companies of its decision regarding acceptance
into the pilot program in writing within 60 days of receipt of the
request. Although incomplete and/or unclear requests will generally be
denied, FDA may contact the applicant to request additional
information.
FDA intends to accept requests to participate starting on the date
of publication of this notice.
IV. Paperwork Reduction Act of 1995
This notice refers to previously approved collections of
information found in FDA regulations. These collections of information
are subject to review by the Office of Management and Budget (OMB)
under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501-3520).
The collections of information in 21 CFR part 314 for submitting
NDAs and ANDAs have been approved under OMB control number 0910-0001,
and the collections of information in 21 CFR part 601 for submitting
BLAs has been approved under OMB control number 0910-0338.
FDA also has OMB approval under control number 0910-0429 for
submissions under the guidance for industry entitled ``Formal Meetings
Between the FDA and Sponsors or Applicants,'' and under the guidance
for industry ``Controlled Correspondence Related to Generic Drug
Development'' (OMB control number 0910-0797).
V. References
The following references are on display in the Dockets Management
Staff (see ADDRESSES) and are available for viewing by interested
persons between 9 a.m. and 4 p.m., Monday through Friday; these are
also available electronically at https://www.regulations.gov. FDA
verified the website addresses, as of the date this document publishes
in the Federal Register, but websites are subject to change over time.
1. FDA draft guidance for industry entitled ``Established
Conditions: Reportable CMC Changes for Approved Drug and Biologic
Products'' (May 2015), available at https://www.fda.gov/downloads/drugs/guidancecomplianceregulatoryinformation/guidances/ucm448638.pdf.
2. FDA draft guidance for industry entitled ``ICH Q12 Technical and
Regulatory Considerations for Pharmaceutical Product Lifecycle
Management'' (May 2018), available at https://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM609205.pdf.
3. FDA draft guidance for industry entitled ``Formal Meetings
Between the FDA and Sponsors or Applicants for PDUFA Products''
(December 2017), available at https://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM590547.pdf.
4. FDA draft guidance for industry entitled ``Formal Meetings
Between the FDA and Sponsors or Applicants of BsUFA Products'' (June
2018), available at https://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM609662.pdf.
5. FDA draft guidance for industry entitled ``Controlled
Correspondence Related to Generic Drug Development'' (November
2017), available at https://www.fda.gov/downloads/Drugs/GuidanceComplianceRegulatoryInformation/Guidances/UCM583436.pdf.
Dated: February 11, 2019.
Lowell J. Schiller,
Acting Associate Commissioner for Policy.
[FR Doc. 2019-02364 Filed 2-14-19; 8:45 am]
BILLING CODE 4164-01-P