Approval of Subzone Status; Future Electronics Distribution Center, L.P.; Southaven, Mississippi, 2156 [2019-01281]

Download as PDF 2156 Federal Register / Vol. 84, No. 25 / Wednesday, February 6, 2019 / Notices Authority, grantee of FTZ 81, requesting subzone status subject to the existing activation limit of FTZ 81, on behalf of Albany Safran Composites LLC, in Rochester, New Hampshire. The application was processed in accordance with the FTZ Act and Regulations, including notice in the Federal Register inviting public comment (83 FR 32072–32073, July 11, 2018). The FTZ staff examiner reviewed the application and determined that it meets the criteria for approval. Pursuant to the authority delegated to the FTZ Board Executive Secretary (15 CFR Sec. 400.36(f)), the application to establish Subzone 81E was approved on September 26, 2018, subject to the FTZ Act and the Board’s regulations, including Section 400.13, and further subject to FTZ 81’s 2,000-acre activation limit. Dated: January 31, 2019. Andrew McGilvray, Executive Secretary. [FR Doc. 2019–01279 Filed 2–5–19; 8:45 am] BILLING CODE 3510–DS–P Dated: January 31, 2019. Andrew McGilvray, Executive Secretary. DEPARTMENT OF COMMERCE [FR Doc. 2019–01280 Filed 2–5–19; 8:45 am] Foreign-Trade Zones Board BILLING CODE 3510–DS–P [S–03–2019] amozie on DSK3GDR082PROD with NOTICES1 FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the FTZ Board’s Executive Secretary at the address below. The closing period for their receipt is March 18, 2019. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to April 2, 2019. A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the FTZ Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Christopher J. Kemp at Christopher.Kemp@trade.gov or (202) 482–0862. Foreign-Trade Zone 50—Long Beach, California; Application for Subzone; Fender Musical Instruments Corporation, San Bernardino and Corona, California DEPARTMENT OF COMMERCE An application has been submitted to the Foreign-Trade Zones (FTZ) Board by the Board of Harbor Commissioners of the Port of Long Beach, grantee of FTZ 50, requesting subzone status for the facilities of Fender Musical Instruments Corporation (Fender), located in San Bernardino and Corona, California. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the FTZ Board (15 CFR part 400). It was formally docketed on January 31, 2019. The proposed subzone would consist of the following sites: Site 1 (15.28 acres) 1295 East Central Avenue, San Bernardino; and, Site 2 (9.12 acres) 301 and 311 Cessna Circle, Corona. The applicant has indicated that a notification of proposed production activity will be submitted which will be published separately for public comment. The proposed subzone would be subject to the existing activation limit of FTZ 50. In accordance with the FTZ Board’s regulations, Christopher J. Kemp of the Approval of Subzone Status; Future Electronics Distribution Center, L.P.; Southaven, Mississippi VerDate Sep<11>2014 18:09 Feb 05, 2019 Jkt 247001 Foreign-Trade Zones Board [S–185–2018] On October 30, 2018, the Executive Secretary of the Foreign-Trade Zones (FTZ) Board docketed an application submitted by the Tunica County, grantee of FTZ 287, requesting subzone status subject to the existing activation limit of FTZ 287, on behalf of Future Electronics Distribution Center, L.P., in Southaven, Mississippi. The application was processed in accordance with the FTZ Act and Regulations, including notice in the Federal Register inviting public comment (83 FR 55691, November 7, 2018). The FTZ staff examiner reviewed the application and determined that it meets the criteria for approval. Pursuant to the authority delegated to the FTZ Board Executive Secretary (15 CFR Sec. 400.36(f)), the application to establish Subzone 287B was approved on January 28, 2019, subject to the FTZ Act and the Board’s regulations, including Section 400.13, and further subject to FTZ 287’s 2,000-acre activation limit. PO 00000 Frm 00018 Fmt 4703 Sfmt 4703 Dated: January 31, 2019. Andrew McGilvray, Executive Secretary. [FR Doc. 2019–01281 Filed 2–5–19; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B–02–2019] Foreign-Trade Zone (FTZ) 106— Oklahoma City, Oklahoma; Notification of Proposed Production Activity; Xerox Corporation (Polyester Latex for Printer/Copier Toner); Oklahoma City, Oklahoma The Port Authority of Greater Oklahoma City, grantee of FTZ 106, submitted a notification of proposed production activity to the FTZ Board on behalf of Xerox Corporation (Xerox), located in Oklahoma City, Oklahoma. The notification conforming to the requirements of the regulations of the FTZ Board (15 CFR 400.22) was received on December 17, 2018. Xerox already has authority to produce bulk toner and toner cartridges within Subzone 106D. Xerox has changed its production process and is no longer producing bulk toner and toner cartridges at its Oklahoma City facility. The facility is currently used for the production of polyester latex for printer/copier toner. The current request would add a finished product and foreign status materials/components to the scope of authority. Pursuant to 15 CFR 400.14(b), additional FTZ activity would be limited to the specific foreignstatus materials and components and specific finished product described in the submitted notification (as described below) and subsequently authorized by the FTZ Board. Production under FTZ procedures could exempt Xerox from customs duty payments on the foreign-status components used in export production. On its domestic sales, for the foreignstatus materials/components noted below, Xerox would be able to choose the duty rate during customs entry procedures that apply to polyester latex (duty rate 5.1%). Xerox would be able to avoid duty on foreign-status components which become scrap/waste. Customs duties also could possibly be deferred or reduced on foreign-status production equipment. The components and materials sourced from abroad include dodecanedioic acid, nonanediol, and dodecylbenzenesulfonic acid sodium salt (duty rates range from 4% to 6.5%). The request indicates that certain E:\FR\FM\06FEN1.SGM 06FEN1

Agencies

[Federal Register Volume 84, Number 25 (Wednesday, February 6, 2019)]
[Notices]
[Page 2156]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-01281]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-185-2018]


Approval of Subzone Status; Future Electronics Distribution 
Center, L.P.; Southaven, Mississippi

    On October 30, 2018, the Executive Secretary of the Foreign-Trade 
Zones (FTZ) Board docketed an application submitted by the Tunica 
County, grantee of FTZ 287, requesting subzone status subject to the 
existing activation limit of FTZ 287, on behalf of Future Electronics 
Distribution Center, L.P., in Southaven, Mississippi.
    The application was processed in accordance with the FTZ Act and 
Regulations, including notice in the Federal Register inviting public 
comment (83 FR 55691, November 7, 2018). The FTZ staff examiner 
reviewed the application and determined that it meets the criteria for 
approval. Pursuant to the authority delegated to the FTZ Board 
Executive Secretary (15 CFR Sec. 400.36(f)), the application to 
establish Subzone 287B was approved on January 28, 2019, subject to the 
FTZ Act and the Board's regulations, including Section 400.13, and 
further subject to FTZ 287's 2,000-acre activation limit.

    Dated: January 31, 2019.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2019-01281 Filed 2-5-19; 8:45 am]
 BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.