Schedules for Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops, 63837-63838 [2018-26896]

Download as PDF 63837 Federal Register / Vol. 83, No. 238 / Wednesday, December 12, 2018 / Notices TABLE 1—REGISTERED BUYER STANDARD EX-VESSEL PRICES BY LANDING LOCATION FOR THE 2018 IFQ SEASON— Continued Registered Buyer Standard Ex-Vessel Prices by Landing Location for 2018 IFQ Season 1 Landing location Halibut standard ex-vessel price Period ending September 30 ..................................................................................... October 31 ......................................................................................... November 30 ...................................................................................... 5.51 5.51 5.51 Sablefish standard ex-vessel price 4.00 4.00 4.00 1 Note: In many instances, prices are not shown in order to comply with confidentiality guidelines when there are fewer than three processors operating in a location during a month. 2 Landing Locations Within Port Group—Bering Sea: Adak, Akutan, Akutan Bay, Atka, Bristol Bay, Chefornak, Dillingham, Captains Bay, Dutch Harbor, Egegik, Ikatan Bay, Hooper Bay, King Cove, King Salmon, Kipnuk, Mekoryuk, Naknek, Nome, Quinhagak, Savoonga, St. George, St. Lawrence, St. Paul, Togiak, Toksook Bay, Tununak, Beaver Inlet, Ugadaga Bay, Unalaska. 3 Landing Locations Within Port Group—Central Gulf of Alaska: Anchor Point, Anchorage, Alitak, Chignik, Cordova, Eagle River, False Pass, West Anchor Cove, Girdwood, Chinitna Bay, Halibut Cove, Homer, Kasilof, Kenai, Kenai River, Alitak, Kodiak, Port Bailey, Nikiski, Ninilchik, Old Harbor, Palmer, Sand Point, Seldovia, Resurrection Bay, Seward, Valdez, Whittier. 4 Landing Locations Within Port Group—Southeast Alaska: Angoon, Baranof Warm Springs, Craig, Edna Bay, Elfin Cove, Excursion Inlet, Gustavus, Haines, Hollis, Hoonah, Hyder, Auke Bay, Douglas, Tee Harbor, Juneau, Kake, Ketchikan, Klawock, Metlakatla, Pelican, Petersburg, Portage Bay, Port Alexander, Port Graham, Port Protection, Point Baker, Sitka, Skagway, Tenakee Springs, Thorne Bay, Wrangell, Yakutat. 5 Landing Locations Within Port Group—All: For Alaska: All landing locations included in 2, 3, and 4. For California: Eureka, Fort Bragg, other California. For Oregon: Astoria, Aurora, Lincoln City, Newport, Warrenton, other Oregon. For Washington: Anacortes, Bellevue, Bellingham, Nagai Island, Edmonds, Everett, Granite Falls, Ilwaco, La Conner, Port Angeles, Port Orchard, Port Townsend, Rainier, Fox Island, Mercer Island, Seattle, Standwood, other Washington. For Canada: Port Hardy, Port Edward, Prince Rupert, Vancouver, Haines Junction, other Canada. Authority: 16 U.S.C. 1801 et seq. Dated: December 7, 2018. Karen H. Abrams, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2018–26875 Filed 12–11–18; 8:45 am] The Atlantic Shark Identification Workshops will be held on January 10, February 7, and March 28, 2019. The Safe Handling, Release, and Identification Workshops will be held on January 10, January 15, February 1, February 7, March 1, and March 13, 2019. See SUPPLEMENTARY INFORMATION for further details. DATES: BILLING CODE 3510–22–P DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648–XG605 National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), Commerce. ACTION: Notice of public workshops. AGENCY: Free Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops will be held in January, February, and March of 2019. Certain fishermen and shark dealers are required to attend a workshop to meet regulatory requirements and to maintain valid permits. Specifically, the Atlantic Shark Identification Workshop is mandatory for all federally permitted Atlantic shark dealers. The Safe Handling, Release, and Identification Workshop is mandatory for vessel owners and operators who use bottom longline, pelagic longline, or gillnet amozie on DSK3GDR082PROD with NOTICES1 VerDate Sep<11>2014 18:39 Dec 11, 2018 Jkt 247001 The Atlantic Shark Identification Workshops will be held in Boutte, LA; Virginia Beach, VA; and Fort Pierce, FL. The Safe Handling, Release, and Identification Workshops will be held in Portsmouth, NH; Key Largo, FL; Gulfport, MS; Charleston, SC; Manahawkin, NJ; and Houston, TX. See SUPPLEMENTARY INFORMATION for further details on workshop locations. ADDRESSES: Schedules for Atlantic Shark Identification Workshops and Safe Handling, Release, and Identification Workshops SUMMARY: gear, and who have also been issued shark or swordfish limited access permits. Additional free workshops will be conducted during 2019 and will be announced in a future notice. FOR FURTHER INFORMATION CONTACT: Rick Pearson by phone: (727) 824–5399. The workshop schedules, registration information, and a list of frequently asked questions regarding the Atlantic Shark ID and Safe Handling, Release, and ID workshops are posted on the internet at: https:// www.fisheries.noaa.gov/atlantic-highlymigratory-species/atlantic-sharkidentification-workshops and https:// www.fisheries.noaa.gov/atlantic-highlymigratory-species/safe-handling-releaseand-identification-workshops. SUPPLEMENTARY INFORMATION: PO 00000 Frm 00013 Fmt 4703 Sfmt 4703 Atlantic Shark Identification Workshops Since January 1, 2008, Atlantic shark dealers have been prohibited from receiving, purchasing, trading, or bartering for Atlantic sharks unless a valid Atlantic Shark Identification Workshop certificate is on the premises of each business listed under the shark dealer permit that first receives Atlantic sharks (71 FR 58057; January 2, 2006). Dealers who attend and successfully complete a workshop are issued a certificate for each place of business that is permitted to receive sharks. These certificate(s) are valid for 3 years. Thus, certificates that were initially issued in 2016 will be expiring in 2019. Approximately 151 free Atlantic Shark Identification Workshops have been conducted since January 2008. Currently, permitted dealers may send a proxy to an Atlantic Shark Identification Workshop. However, if a dealer opts to send a proxy, the dealer must designate a proxy for each place of business covered by the dealer’s permit which first receives Atlantic sharks. Only one certificate will be issued to each proxy. A proxy must be a person who is currently employed by a place of business covered by the dealer’s permit; is a primary participant in the identification, weighing, and/or first receipt of fish as they are offloaded from a vessel; and who fills out dealer reports. Atlantic shark dealers are prohibited from renewing a Federal shark dealer permit unless a valid Atlantic Shark Identification Workshop certificate for each business location that first receives Atlantic sharks has E:\FR\FM\12DEN1.SGM 12DEN1 63838 Federal Register / Vol. 83, No. 238 / Wednesday, December 12, 2018 / Notices been submitted with the permit renewal application. Additionally, trucks or other conveyances that are extensions of a dealer’s place of business must possess a copy of a valid dealer or proxy Atlantic Shark Identification Workshop certificate. Workshop Dates, Times, and Locations 1. January 10, 2019, 12 p.m.–4 p.m., La Quinta Inn, 14221 Highway 90, Boutte, LA 70039. 2. February 7, 2019, 12 p.m.–4 p.m., Hampton Inn, 1011 Atlantic Avenue, Virginia Beach, VA 23451. 3. March 28, 2019, 12 p.m.–4 p.m., Hampton Inn, 1985 Reynolds Drive, Fort Pierce, FL 34945. Registration To register for a scheduled Atlantic Shark Identification Workshop, please contact Eric Sander at ericssharkguide@ yahoo.com or at (386) 852–8588. Preregistration is highly recommended, but not required. Registration Materials To ensure that workshop certificates are linked to the correct permits, participants will need to bring the following specific items to the workshop: • Atlantic shark dealer permit holders must bring proof that the attendee is an owner or agent of the business (such as articles of incorporation), a copy of the applicable permit, and proof of identification. • Atlantic shark dealer proxies must bring documentation from the permitted dealer acknowledging that the proxy is attending the workshop on behalf of the permitted Atlantic shark dealer for a specific business location, a copy of the appropriate valid permit, and proof of identification. amozie on DSK3GDR082PROD with NOTICES1 Workshop Objectives The Atlantic Shark Identification Workshops are designed to reduce the number of unknown and improperly identified sharks reported in the dealer reporting form and increase the accuracy of species-specific dealerreported information. Reducing the number of unknown and improperly identified sharks will improve quota monitoring and the data used in stock assessments. These workshops will train shark dealer permit holders or their proxies to properly identify Atlantic shark carcasses. Safe Handling, Release, and Identification Workshops Since January 1, 2007, shark limitedaccess and swordfish limited-access permit holders who fish with longline VerDate Sep<11>2014 18:39 Dec 11, 2018 Jkt 247001 or gillnet gear have been required to submit a copy of their Safe Handling, Release, and Identification Workshop certificate in order to renew either permit (71 FR 58057; January 2, 2006). These certificate(s) are valid for 3 years. Certificates issued in 2016 will be expiring in 2019. As such, vessel owners who have not already attended a workshop and received a NMFS certificate, or vessel owners whose certificate(s) will expire prior to the next permit renewal, must attend a workshop to fish with, or renew, their swordfish and shark limited-access permits. Additionally, new shark and swordfish limited-access permit applicants who intend to fish with longline or gillnet gear must attend a Safe Handling, Release, and Identification Workshop and submit a copy of their workshop certificate before either of the permits will be issued. Approximately 292 free Safe Handling, Release, and Identification Workshops have been conducted since 2006. In addition to certifying vessel owners, at least one operator on board vessels issued a limited-access swordfish or shark permit that uses longline or gillnet gear is required to attend a Safe Handling, Release, and Identification Workshop and receive a certificate. Vessels that have been issued a limited-access swordfish or shark permit and that use longline or gillnet gear may not fish unless both the vessel owner and operator have valid workshop certificates onboard at all times. Vessel operators who have not already attended a workshop and received a NMFS certificate, or vessel operators whose certificate(s) will expire prior to their next fishing trip, must attend a workshop to operate a vessel with swordfish and shark limited-access permits that uses longline or gillnet gear. Workshop Dates, Times, and Locations 1. January 10, 2019, 9 a.m.–5 p.m., Holiday Inn, 300 Woodbury Avenue, Portsmouth, New Hampshire 03801. 2. January 15, 2019, 9 a.m.–5 p.m., Holiday Inn, 99701 Overseas Highway, Key Largo, FL 33037. 3. February 1, 2019, 9 a.m.–5 p.m., Gulf Coast Event Center, 9475 Highway 49, Gulfport, MS 39503. 4. February 7, 2019, 9 a.m.–5 p.m., Hampton Inn, 678 Citadel Haven Drive, Charleston, SC 29414. 5. March 1, 2019, 9 a.m.–5 p.m., Holiday Inn, 151 Route 72 West, Manahawkin, NJ 08050. 6. March 13, 2019, 9 a.m.–5 p.m., Holiday Inn Express, 9300 South Main Street, Houston, TX 77025. PO 00000 Frm 00014 Fmt 4703 Sfmt 9990 Registration To register for a scheduled Safe Handling, Release, and Identification Workshop, please contact Angler Conservation Education at (386) 682– 0158. Pre-registration is highly recommended, but not required. Registration Materials To ensure that workshop certificates are linked to the correct permits, participants will need to bring the following specific items with them to the workshop: • Individual vessel owners must bring a copy of the appropriate swordfish and/or shark permit(s), a copy of the vessel registration or documentation, and proof of identification. • Representatives of a businessowned or co-owned vessel must bring proof that the individual is an agent of the business (such as articles of incorporation), a copy of the applicable swordfish and/or shark permit(s), and proof of identification. • Vessel operators must bring proof of identification. Workshop Objectives The Safe Handling, Release, and Identification Workshops are designed to teach longline and gillnet fishermen the required techniques for the safe handling and release of entangled and/ or hooked protected species, such as sea turtles, marine mammals, and smalltooth sawfish, and prohibited sharks. In an effort to improve reporting, the proper identification of protected species and prohibited sharks will also be taught at these workshops. Additionally, individuals attending these workshops will gain a better understanding of the requirements for participating in these fisheries. The overall goal of these workshops is to provide participants with the skills needed to reduce the mortality of protected species and prohibited sharks, which may prevent additional regulations on these fisheries in the future. Authority: 16 U.S.C. 1801 et seq. Dated: December 7, 2018. Karen H. Abrams, Acting Director, Office of Sustainable Fisheries, National Marine Fisheries Service. [FR Doc. 2018–26896 Filed 12–11–18; 8:45 am] BILLING CODE 3510–22–P E:\FR\FM\12DEN1.SGM 12DEN1

Agencies

[Federal Register Volume 83, Number 238 (Wednesday, December 12, 2018)]
[Notices]
[Pages 63837-63838]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-26896]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

National Oceanic and Atmospheric Administration

RIN 0648-XG605


Schedules for Atlantic Shark Identification Workshops and Safe 
Handling, Release, and Identification Workshops

AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and 
Atmospheric Administration (NOAA), Commerce.

ACTION: Notice of public workshops.

-----------------------------------------------------------------------

SUMMARY: Free Atlantic Shark Identification Workshops and Safe 
Handling, Release, and Identification Workshops will be held in 
January, February, and March of 2019. Certain fishermen and shark 
dealers are required to attend a workshop to meet regulatory 
requirements and to maintain valid permits. Specifically, the Atlantic 
Shark Identification Workshop is mandatory for all federally permitted 
Atlantic shark dealers. The Safe Handling, Release, and Identification 
Workshop is mandatory for vessel owners and operators who use bottom 
longline, pelagic longline, or gillnet gear, and who have also been 
issued shark or swordfish limited access permits. Additional free 
workshops will be conducted during 2019 and will be announced in a 
future notice.

DATES: The Atlantic Shark Identification Workshops will be held on 
January 10, February 7, and March 28, 2019. The Safe Handling, Release, 
and Identification Workshops will be held on January 10, January 15, 
February 1, February 7, March 1, and March 13, 2019. See SUPPLEMENTARY 
INFORMATION for further details.

ADDRESSES: The Atlantic Shark Identification Workshops will be held in 
Boutte, LA; Virginia Beach, VA; and Fort Pierce, FL. The Safe Handling, 
Release, and Identification Workshops will be held in Portsmouth, NH; 
Key Largo, FL; Gulfport, MS; Charleston, SC; Manahawkin, NJ; and 
Houston, TX. See SUPPLEMENTARY INFORMATION for further details on 
workshop locations.

FOR FURTHER INFORMATION CONTACT: Rick Pearson by phone: (727) 824-5399.

SUPPLEMENTARY INFORMATION: The workshop schedules, registration 
information, and a list of frequently asked questions regarding the 
Atlantic Shark ID and Safe Handling, Release, and ID workshops are 
posted on the internet at: https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/atlantic-shark-identification-workshops and 
https://www.fisheries.noaa.gov/atlantic-highly-migratory-species/safe-handling-release-and-identification-workshops.

Atlantic Shark Identification Workshops

    Since January 1, 2008, Atlantic shark dealers have been prohibited 
from receiving, purchasing, trading, or bartering for Atlantic sharks 
unless a valid Atlantic Shark Identification Workshop certificate is on 
the premises of each business listed under the shark dealer permit that 
first receives Atlantic sharks (71 FR 58057; January 2, 2006). Dealers 
who attend and successfully complete a workshop are issued a 
certificate for each place of business that is permitted to receive 
sharks. These certificate(s) are valid for 3 years. Thus, certificates 
that were initially issued in 2016 will be expiring in 2019. 
Approximately 151 free Atlantic Shark Identification Workshops have 
been conducted since January 2008.
    Currently, permitted dealers may send a proxy to an Atlantic Shark 
Identification Workshop. However, if a dealer opts to send a proxy, the 
dealer must designate a proxy for each place of business covered by the 
dealer's permit which first receives Atlantic sharks. Only one 
certificate will be issued to each proxy. A proxy must be a person who 
is currently employed by a place of business covered by the dealer's 
permit; is a primary participant in the identification, weighing, and/
or first receipt of fish as they are offloaded from a vessel; and who 
fills out dealer reports. Atlantic shark dealers are prohibited from 
renewing a Federal shark dealer permit unless a valid Atlantic Shark 
Identification Workshop certificate for each business location that 
first receives Atlantic sharks has

[[Page 63838]]

been submitted with the permit renewal application. Additionally, 
trucks or other conveyances that are extensions of a dealer's place of 
business must possess a copy of a valid dealer or proxy Atlantic Shark 
Identification Workshop certificate.

Workshop Dates, Times, and Locations

    1. January 10, 2019, 12 p.m.-4 p.m., La Quinta Inn, 14221 Highway 
90, Boutte, LA 70039.
    2. February 7, 2019, 12 p.m.-4 p.m., Hampton Inn, 1011 Atlantic 
Avenue, Virginia Beach, VA 23451.
    3. March 28, 2019, 12 p.m.-4 p.m., Hampton Inn, 1985 Reynolds 
Drive, Fort Pierce, FL 34945.

Registration

    To register for a scheduled Atlantic Shark Identification Workshop, 
please contact Eric Sander at [email protected] or at (386) 
852-8588. Pre-registration is highly recommended, but not required.

Registration Materials

    To ensure that workshop certificates are linked to the correct 
permits, participants will need to bring the following specific items 
to the workshop:
     Atlantic shark dealer permit holders must bring proof that 
the attendee is an owner or agent of the business (such as articles of 
incorporation), a copy of the applicable permit, and proof of 
identification.
     Atlantic shark dealer proxies must bring documentation 
from the permitted dealer acknowledging that the proxy is attending the 
workshop on behalf of the permitted Atlantic shark dealer for a 
specific business location, a copy of the appropriate valid permit, and 
proof of identification.

Workshop Objectives

    The Atlantic Shark Identification Workshops are designed to reduce 
the number of unknown and improperly identified sharks reported in the 
dealer reporting form and increase the accuracy of species-specific 
dealer-reported information. Reducing the number of unknown and 
improperly identified sharks will improve quota monitoring and the data 
used in stock assessments. These workshops will train shark dealer 
permit holders or their proxies to properly identify Atlantic shark 
carcasses.

Safe Handling, Release, and Identification Workshops

    Since January 1, 2007, shark limited-access and swordfish limited-
access permit holders who fish with longline or gillnet gear have been 
required to submit a copy of their Safe Handling, Release, and 
Identification Workshop certificate in order to renew either permit (71 
FR 58057; January 2, 2006). These certificate(s) are valid for 3 years. 
Certificates issued in 2016 will be expiring in 2019. As such, vessel 
owners who have not already attended a workshop and received a NMFS 
certificate, or vessel owners whose certificate(s) will expire prior to 
the next permit renewal, must attend a workshop to fish with, or renew, 
their swordfish and shark limited-access permits. Additionally, new 
shark and swordfish limited-access permit applicants who intend to fish 
with longline or gillnet gear must attend a Safe Handling, Release, and 
Identification Workshop and submit a copy of their workshop certificate 
before either of the permits will be issued. Approximately 292 free 
Safe Handling, Release, and Identification Workshops have been 
conducted since 2006.
    In addition to certifying vessel owners, at least one operator on 
board vessels issued a limited-access swordfish or shark permit that 
uses longline or gillnet gear is required to attend a Safe Handling, 
Release, and Identification Workshop and receive a certificate. Vessels 
that have been issued a limited-access swordfish or shark permit and 
that use longline or gillnet gear may not fish unless both the vessel 
owner and operator have valid workshop certificates onboard at all 
times. Vessel operators who have not already attended a workshop and 
received a NMFS certificate, or vessel operators whose certificate(s) 
will expire prior to their next fishing trip, must attend a workshop to 
operate a vessel with swordfish and shark limited-access permits that 
uses longline or gillnet gear.

Workshop Dates, Times, and Locations

    1. January 10, 2019, 9 a.m.-5 p.m., Holiday Inn, 300 Woodbury 
Avenue, Portsmouth, New Hampshire 03801.
    2. January 15, 2019, 9 a.m.-5 p.m., Holiday Inn, 99701 Overseas 
Highway, Key Largo, FL 33037.
    3. February 1, 2019, 9 a.m.-5 p.m., Gulf Coast Event Center, 9475 
Highway 49, Gulfport, MS 39503.
    4. February 7, 2019, 9 a.m.-5 p.m., Hampton Inn, 678 Citadel Haven 
Drive, Charleston, SC 29414.
    5. March 1, 2019, 9 a.m.-5 p.m., Holiday Inn, 151 Route 72 West, 
Manahawkin, NJ 08050.
    6. March 13, 2019, 9 a.m.-5 p.m., Holiday Inn Express, 9300 South 
Main Street, Houston, TX 77025.

Registration

    To register for a scheduled Safe Handling, Release, and 
Identification Workshop, please contact Angler Conservation Education 
at (386) 682-0158. Pre-registration is highly recommended, but not 
required.

Registration Materials

    To ensure that workshop certificates are linked to the correct 
permits, participants will need to bring the following specific items 
with them to the workshop:
     Individual vessel owners must bring a copy of the 
appropriate swordfish and/or shark permit(s), a copy of the vessel 
registration or documentation, and proof of identification.
     Representatives of a business-owned or co-owned vessel 
must bring proof that the individual is an agent of the business (such 
as articles of incorporation), a copy of the applicable swordfish and/
or shark permit(s), and proof of identification.
     Vessel operators must bring proof of identification.

Workshop Objectives

    The Safe Handling, Release, and Identification Workshops are 
designed to teach longline and gillnet fishermen the required 
techniques for the safe handling and release of entangled and/or hooked 
protected species, such as sea turtles, marine mammals, and smalltooth 
sawfish, and prohibited sharks. In an effort to improve reporting, the 
proper identification of protected species and prohibited sharks will 
also be taught at these workshops. Additionally, individuals attending 
these workshops will gain a better understanding of the requirements 
for participating in these fisheries. The overall goal of these 
workshops is to provide participants with the skills needed to reduce 
the mortality of protected species and prohibited sharks, which may 
prevent additional regulations on these fisheries in the future.

    Authority:  16 U.S.C. 1801 et seq.

    Dated: December 7, 2018.
Karen H. Abrams,
Acting Director, Office of Sustainable Fisheries, National Marine 
Fisheries Service.
[FR Doc. 2018-26896 Filed 12-11-18; 8:45 am]
 BILLING CODE 3510-22-P