Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Friction Materials Manufacturing (Renewal), 61634 [2018-25768]

Download as PDF 61634 Federal Register / Vol. 83, No. 231 / Friday, November 30, 2018 / Notices amozie on DSK3GDR082PROD with NOTICES1 Pursuant to 40 CFR 155.53(c), EPA is providing an opportunity, through this notice of availability, for interested parties to provide comments and input concerning the Agency’s draft human health and/or ecological risk assessments for the pesticides listed in the Table in Unit IV. The Agency will consider all comments received during the public comment period and make changes, as appropriate, to a draft human health and/or ecological risk assessment. EPA may then issue a revised risk assessment, explain any changes to the draft risk assessment, and respond to comments. Information submission requirements. Anyone may submit data or information in response to this document. To be considered during a pesticide’s registration review, the submitted data or information must meet the following requirements: • To ensure that EPA will consider data or information submitted, interested persons must submit the data or information during the comment period. The Agency may, at its discretion, consider data or information submitted at a later date. • The data or information submitted must be presented in a legible and useable form. For example, an English translation must accompany any material that is not in English and a written transcript must accompany any information submitted as an audiographic or videographic record. Written material may be submitted in paper or electronic form. • Submitters must clearly identify the source of any submitted data or information. • Submitters may request the Agency to reconsider data or information that the Agency rejected in a previous review. However, submitters must explain why they believe the Agency should reconsider the data or information in the pesticide’s registration review. As provided in 40 CFR 155.58, the registration review docket for each pesticide case will remain publicly accessible through the duration of the registration review process; that is, until all actions required in the final decision on the registration review case have been completed. Authority: 7 U.S.C. 136 et seq. Dated: October 25, 2018. Yu-Ting Guilaran, Director, Pesticide Re-Evaluation Division, Office of Pesticide Programs. [FR Doc. 2018–26086 Filed 11–29–18; 8:45 am] BILLING CODE 6560–50–P VerDate Sep<11>2014 17:00 Nov 29, 2018 Jkt 247001 ENVIRONMENTAL PROTECTION AGENCY [EPA–HQ–OECA–2014–0085; FRL–9974– 64–OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Friction Materials Manufacturing (Renewal) Environmental Protection Agency (EPA). ACTION: Notice. AGENCY: The Environmental Protection Agency (EPA) has submitted an information collection request (ICR)— NESHAP for Friction Materials Manufacturing (EPA ICR Number 2025.07, OMB Control Number 2060– 0481) to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act. This is a proposed extension of the ICR, which is currently approved through August 31, 2018. Public comments were requested previously, via the Federal Register on June 29, 2017 during a 60-day comment period. This notice allows for an additional 30 days for public comments. A fuller description of the ICR is given below, including its estimated burden and cost to the public. An agency may neither conduct nor sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. DATES: Additional comments may be submitted on or before December 31, 2018. SUMMARY: Submit your comments, referencing Docket ID Number EPA– HQ–OECA–2014–0085, to: (1) EPA online using www.regulations.gov (our preferred method), or by email to docket.oeca@epa.gov, or by mail to: EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW, Washington, DC 20460; and (2) OMB via email to oira_submission@omb.eop.gov. Address comments to OMB Desk Officer for EPA. EPA’s policy is that all comments received will be included in the public docket without change, including any personal information provided, unless the comment includes profanity, threats, information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, Assistance, and Media Programs Division, Office of ADDRESSES: PO 00000 Frm 00036 Fmt 4703 Sfmt 9990 Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460; telephone number: (202) 564– 2970; fax number: (202) 564–0050; email address: yellin.patrick@epa.gov. SUPPLEMENTARY INFORMATION: Supporting documents, which explain in detail the information that the EPA will be collecting, are available in the public docket for this ICR. The docket can be viewed online at www.regulations.gov or in person at the EPA Docket Center, WJC West, Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone number for the Docket Center is 202–566–1744. For additional information about EPA’s public docket, visit: https:// www.epa.gov/dockets. Abstract: Owners and operators of affected facilities are required to comply with reporting and record keeping requirements for the general provisions of 40 CFR part 63, subpart A, as well as the specific requirements at 40 CFR part 63, subpart QQQQQ. This includes submitting initial notifications, performance tests and periodic reports and results, and maintaining records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These reports are used by EPA to determine compliance with the standards. Form Numbers: None. Respondents/affected entities: Friction materials manufacturing facilities. Respondent’s obligation to respond: Mandatory (40 CFR part 63, subpart QQQQQ). Estimated number of respondents: 2 (total). Frequency of response: Initially and semiannually. Total estimated burden: 659 hours (per year). Burden is defined at 5 CFR 1320.3(b). Total estimated cost: $69,700 (per year), which includes $544 in either annualized capital/start up and/or operation & maintenance costs. Changes in the estimates: There is an adjustment decrease in the total estimated burden as currently identified in the OMB Inventory of Approved Burdens. This decrease is not due to any program changes. The change in the burden occurred due to a decrease in the respondent universe. Courtney Kerwin, Director, Regulatory Support Division. [FR Doc. 2018–25768 Filed 11–29–18; 8:45 am] BILLING CODE 6560–50–P E:\FR\FM\30NON1.SGM 30NON1

Agencies

[Federal Register Volume 83, Number 231 (Friday, November 30, 2018)]
[Notices]
[Page 61634]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-25768]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OECA-2014-0085; FRL-9974-64-OEI]


Information Collection Request Submitted to OMB for Review and 
Approval; Comment Request; NESHAP for Friction Materials Manufacturing 
(Renewal)

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Environmental Protection Agency (EPA) has submitted an 
information collection request (ICR)--NESHAP for Friction Materials 
Manufacturing (EPA ICR Number 2025.07, OMB Control Number 2060-0481) to 
the Office of Management and Budget (OMB) for review and approval in 
accordance with the Paperwork Reduction Act. This is a proposed 
extension of the ICR, which is currently approved through August 31, 
2018. Public comments were requested previously, via the Federal 
Register on June 29, 2017 during a 60-day comment period. This notice 
allows for an additional 30 days for public comments. A fuller 
description of the ICR is given below, including its estimated burden 
and cost to the public. An agency may neither conduct nor sponsor, and 
a person is not required to respond to, a collection of information 
unless it displays a currently valid OMB control number.

DATES: Additional comments may be submitted on or before December 31, 
2018.

ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2014-0085, to: (1) EPA online using www.regulations.gov (our 
preferred method), or by email to [email protected], or by mail to: 
EPA Docket Center, Environmental Protection Agency, Mail Code 28221T, 
1200 Pennsylvania Ave. NW, Washington, DC 20460; and (2) OMB via email 
to [email protected]. Address comments to OMB Desk Officer 
for EPA.
    EPA's policy is that all comments received will be included in the 
public docket without change, including any personal information 
provided, unless the comment includes profanity, threats, information 
claimed to be Confidential Business Information (CBI) or other 
information whose disclosure is restricted by statute.

FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring, 
Assistance, and Media Programs Division, Office of Compliance, Mail 
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, 
Washington, DC 20460; telephone number: (202) 564-2970; fax number: 
(202) 564-0050; email address: [email protected].

SUPPLEMENTARY INFORMATION: Supporting documents, which explain in 
detail the information that the EPA will be collecting, are available 
in the public docket for this ICR. The docket can be viewed online at 
www.regulations.gov or in person at the EPA Docket Center, WJC West, 
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone 
number for the Docket Center is 202-566-1744. For additional 
information about EPA's public docket, visit: https://www.epa.gov/dockets.
    Abstract: Owners and operators of affected facilities are required 
to comply with reporting and record keeping requirements for the 
general provisions of 40 CFR part 63, subpart A, as well as the 
specific requirements at 40 CFR part 63, subpart QQQQQ. This includes 
submitting initial notifications, performance tests and periodic 
reports and results, and maintaining records of the occurrence and 
duration of any startup, shutdown, or malfunction in the operation of 
an affected facility, or any period during which the monitoring system 
is inoperative. These reports are used by EPA to determine compliance 
with the standards.
    Form Numbers: None.
    Respondents/affected entities: Friction materials manufacturing 
facilities.
    Respondent's obligation to respond: Mandatory (40 CFR part 63, 
subpart QQQQQ).
    Estimated number of respondents: 2 (total).
    Frequency of response: Initially and semiannually.
    Total estimated burden: 659 hours (per year). Burden is defined at 
5 CFR 1320.3(b).
    Total estimated cost: $69,700 (per year), which includes $544 in 
either annualized capital/start up and/or operation & maintenance 
costs.
    Changes in the estimates: There is an adjustment decrease in the 
total estimated burden as currently identified in the OMB Inventory of 
Approved Burdens. This decrease is not due to any program changes. The 
change in the burden occurred due to a decrease in the respondent 
universe.

Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018-25768 Filed 11-29-18; 8:45 am]
 BILLING CODE 6560-50-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.