November 6, 2018 – Federal Register Recent Federal Regulation Documents

Fludioxonil; Pesticide Tolerances
Document Number: 2018-24265
Type: Rule
Date: 2018-11-06
Agency: Environmental Protection Agency
This regulation establishes revised tolerances for residues of fludioxonil in or on beet, sugar, roots at 4.0 parts per million. Syngenta Crop Protection, LLC requested this tolerance under the Federal Food, Drug, and Cosmetic Act (FFDCA).
Maximum Allowable 7(a) Fixed Interest Rates
Document Number: 2018-24258
Type: Rule
Date: 2018-11-06
Agency: Small Business Administration, Agencies and Commissions
This document announces the maximum allowable fixed interest rates for 7(a) guaranteed loans.
Specifications and Drawings for Underground Electric Distribution
Document Number: 2018-24248
Type: Rule
Date: 2018-11-06
Agency: Department of Agriculture, Rural Utilities Service
The Rural Utilities Service (RUS), a Rural Development agency of the U.S. Department of Agriculture, is amending its regulations for electric standards and specifications in Bulletin 1728F-806 (D-806), ``Specifications and Drawings for Underground Electric Distribution,'' which is incorporated by reference, to digitize RUS accounting, clarify RUS requirements, update current standards and practices, and improve customer service. This bulletin contains complete specifications settings forth the RUS requirements for constructing rural underground electric distribution systems using state-of-the-art materials, equipment, and construction methods.
Safety Zones; Coast Guard Sector New Orleans Annual and Recurring Safety Zones Update
Document Number: 2018-24230
Type: Rule
Date: 2018-11-06
Agency: Coast Guard, Department of Homeland Security
The Coast Guard is amending its safety zone regulations for annual events in Coast Guard Sector New Orleans' area of responsibility. This rule adds four new recurring safety zones and amends the location or dates for two events already listed in the table. This action is necessary to protect spectators, participants, and vessels from the hazards associated with annual marine events. This rulemaking would prohibit entry into the safety zones during the events unless authorized by the Captain of the Port Sector New Orleans or a designated representative.
Commission Statement on Certain Provisions of Business Conduct Standards for Security-Based Swap Dealers and Major Security-Based Swap Participants
Document Number: 2018-24213
Type: Rule
Date: 2018-11-06
Agency: Securities and Exchange Commission, Agencies and Commissions
The Commission is issuing a statement regarding certain provisions of its Business Conduct Standards for Security-Based Swap Dealers and Major Security-Based Swap Participants. The statement sets forth the Commission's position, for five years after the compliance date for the security-based swap dealer and major security-based swap participant registration rules, that certain actions with respect to provisions of the Commission's business conduct standards will not provide a basis for a Commission enforcement action.
Airspace Designations; Incorporation by Reference Amendments
Document Number: 2018-24210
Type: Rule
Date: 2018-11-06
Agency: Federal Aviation Administration, Department of Transportation
This action incorporates certain airspace designation amendments into FAA Order 7400.11C, dated August 13, 2018, and effective September 15, 2018, for incorporation by reference.
Risk-Based Capital
Document Number: 2018-24171
Type: Rule
Date: 2018-11-06
Agency: National Credit Union Administration, Agencies and Commissions
The NCUA Board (Board) is amending the NCUA's previously revised regulations regarding prompt corrective action (PCA). The final rule delays the effective date of the NCUA's October 29, 2015 final rule regarding risk-based capital (2015 Final Rule) for one year, moving the effective date from January 1, 2019 to January 1, 2020. During the extended delay period, the NCUA's current PCA requirements will remain in effect. The final rule also amends the definition of a ``complex'' credit union adopted in the 2015 Final Rule for risk-based capital purposes by increasing the threshold level for coverage from $100 million to $500 million. These changes provide covered credit unions and the NCUA with additional time to prepare for the rule's implementation, and exempt an additional 1,026 credit unions from the risk-based capital requirements of the 2015 Final Rule without subjecting the National Credit Union Share Insurance Fund (NCUSIF) to undue risk.
Airworthiness Directives; BRP-Rotax GmbH & Co KG Engines
Document Number: 2018-24044
Type: Proposed Rule
Date: 2018-11-06
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain BRP-Rotax GmbH & Co KG (Rotax) 912 and 914 model engines. This proposed AD was prompted by power loss and engine revolutions per minute (RPM) drop on Rotax 912 and 914 model engines due to a quality control deficiency in the manufacturing process of certain valve push- rod assemblies resulting in partial wear on the rocker arm ball socket and possible malfunction of the valve. This proposed AD would require a one-time inspection and, depending on the findings, replacement of the affected parts with parts eligible for installation. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2018-24020
Type: Proposed Rule
Date: 2018-11-06
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2017-07- 05, which applies to all Airbus SAS Model A300 series airplanes; and Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2017-07-05 requires repetitive detailed visual inspections of the main landing gear (MLG) leg components and replacement of the MLG leg if cracked components are found. Since we issued AD 2017-07-05, further investigation revealed that overhaul of the MLG does not alleviate the need for inspecting the MLG hinge arm/ barrel pin for cracking. This proposed AD would retain the requirements of AD 2017-07-05 and remove the credit for doing a MLG overhaul in lieu of the initial inspection of the MLG leg components. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2018-24019
Type: Proposed Rule
Date: 2018-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposal, which would have applied to certain Airbus SAS Model A350-941 airplanes. This action revises the notice of proposed rulemaking (NPRM) by adding airplanes to the applicability and proposing to require revised maintenance requirements and airworthiness limitations. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these changes would impose an additional burden over the proposed requirements in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Implementing the Freedom of Information Act
Document Number: 2018-23481
Type: Proposed Rule
Date: 2018-11-06
Agency: National Foundation on the Arts and the Humanities, Agencies and Commissions, National Endowment for the Arts
On June 9, 2017, the NEA proposed a rule titled Implementing the Freedom of Information Act. This rule proposes amending the National Endowment for the Arts' (NEA) regulations implementing the Freedom of Information Act (FOIA). The new proposed rule reflects statutory changes to FOIA, current NEA organizational structure, and current NEA policies and practices with respect to FOIA. Finally, the proposed rule uses current cost figures in calculating and charging fees. Due to delays in publishing the final rule, the agency is re- opening the comment period on these rules for an additional 30 days.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.