Information Collection Request Submitted to OMB for Review and Approval; Comment Request; NESHAP for Rubber Tire Manufacturing (Reinstatement), 54748-54749 [2018-23754]
Download as PDF
54748
Federal Register / Vol. 83, No. 211 / Wednesday, October 31, 2018 / Notices
Inventory of Approved Burdens. The
change in burden occurred because the
number of respondents, subject to these
standards, has increased since the last
ICR renewal period. In addition, this
ICR assumes all existing respondents
will have to familiarize with the
regulatory requirements each year.
Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018–23752 Filed 10–30–18; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2014–0042; FRL–9985–
01–OEI]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; NSPS
for Lime Manufacturing (Renewal)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
NSPS for Lime Manufacturing (EPA ICR
No. 1167.12, OMB Control No. 2060–
0063), to the Office of Management and
Budget (OMB) for review and approval
in accordance with the Paperwork
Reduction Act. This is a proposed
extension of the ICR, which is currently
approved through November 30, 2018.
Public comments were previously
requested, via the Federal Register, on
June 29, 2017 during a 60-day comment
period. This notice allows for an
additional 30 days for public comments.
A fuller description of the ICR is given
below, including its estimated burden
and cost to the public. An agency may
neither conduct nor sponsor, and a
person is not required to respond to, a
collection of information unless it
displays a currently valid OMB control
number.
DATES: Additional comments may be
submitted on or before November 30,
2018.
ADDRESSES: Submit your comments,
referencing Docket ID Number EPA–
HQ–OECA–2014–0042, to: (1) EPA
online using www.regulations.gov (our
preferred method), or by email to
docket.oeca@epa.gov, or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW,
Washington, DC 20460; and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
amozie on DSK3GDR082PROD with NOTICES1
SUMMARY:
VerDate Sep<11>2014
18:06 Oct 30, 2018
Jkt 247001
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI), or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Patrick Yellin, Monitoring, Assistance,
and Media Programs Division, Office of
Compliance, Mail Code 2227A,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460; telephone number: (202) 564–
2970; fax number: (202) 564–0050;
email address: yellin.patrick@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA
will be collecting, are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, EPA West, Room
3334, 1301 Constitution Ave. NW,
Washington, DC. The telephone number
for the Docket Center is 202–566–1744.
For additional information about EPA’s
public docket, visit: https://
www.epa.gov/dockets.
Abstract: The New Source
Performance Standards (NSPS) for Lime
Manufacturing (40 CFR part 60, subpart
HH) apply to each existing and new
rotary lime kiln used in the
manufacturing of lime. These standards
do not apply to facilities used in the
manufacture of lime at kraft pulp mills.
New facilities include those that
commenced construction, modification
or reconstruction after the date of
proposal. In general, all NSPS standards
require initial notifications,
performance tests, and periodic reports
by the owners/operators of the affected
facilities. They are also required to
maintain records of the occurrence and
duration of any startup, shutdown, or
malfunction in the operation of an
affected facility, or any period during
which the monitoring system is
inoperative. These notifications, reports,
and records are essential in determining
compliance with 40 CFR part 60,
subpart HH.
Form Numbers: None.
Respondents/affected entities: Lime
manufacturing plants.
Respondent’s obligation to respond:
Mandatory (40 CFR part 60, subpart
HH).
Estimated number of respondents: 41
(total).
Frequency of response: Initially and
semiannually.
PO 00000
Frm 00048
Fmt 4703
Sfmt 4703
Total estimated burden: 3,820 hours
(per year). Burden is defined at 5 CFR
1320.3(b).
Total estimated cost: $463,000 (per
year), which includes $61,500 in
annualized capital/startup and/or
operation & maintenance costs.
Changes in the estimates: There is an
adjustment increase in the respondent
labor hours and costs as currently
identified in the OMB Inventory of
Approved Burdens. This increase is not
due to any program changes. The
change in the burden and cost estimates
occurred due to a change in assumption.
This ICR assumes all existing
respondents will have to familiarize
with the regulatory requirements each
year.
Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018–23746 Filed 10–30–18; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OECA–2017–0200; FRL–9984–
86–OEI]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; NESHAP
for Rubber Tire Manufacturing
(Reinstatement)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
NESHAP for Rubber Tire Manufacturing
(EPA ICR No. 1982.02), to the Office of
Management and Budget (OMB) for
review and approval in accordance with
the Paperwork Reduction Act. Public
comments were requested previously,
via the Federal Register, on June 29,
2017 during a 60-day comment period.
This notice allows for an additional 30
days for public comments. A fuller
description of the ICR is given below,
including its estimated burden and cost
to the public. An agency may neither
conduct nor sponsor, and a person is
not required to respond to a collection
of information unless it displays a
currently valid OMB control number.
DATES: Additional comments may be
submitted on or before November 30,
2018.
ADDRESSES: Submit your comments,
referencing Docket ID Number EPA–
HQ–OECA–2017–0200, to: (1) EPA
online using www.regulations.gov (our
preferred method), or by email to
SUMMARY:
E:\FR\FM\31OCN1.SGM
31OCN1
amozie on DSK3GDR082PROD with NOTICES1
Federal Register / Vol. 83, No. 211 / Wednesday, October 31, 2018 / Notices
docket.oeca@epa.gov, or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW,
Washington, DC 20460; and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI), or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Patrick Yellin, Monitoring, Assistance,
and Media Programs Division, Office of
Compliance, Mail Code 2227A,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460; telephone number: (202) 564–
2970; fax number: (202) 564–0050;
email address: yellin.patrick@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA
will be collecting, are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, WJC West, Room
3334, 1301 Constitution Ave. NW,
Washington, DC. The telephone number
for the Docket Center is 202–566–1744.
For additional information about EPA’s
public docket, visit: https://
www.epa.gov/dockets.
Abstract: The National Emission
Standards for Hazardous Air Pollutants
(NESHAP) for Rubber Tire
Manufacturing (40 CFR part 63, subpart
XXXX) apply to existing and new
facilities that are involved in rubber
processing, tire production, tire cord
production, and puncture sealant
application. New facilities include those
that commenced construction or
reconstruction after the date of proposal.
In general, all NESHAP standards
require initial notifications,
performance tests, and periodic reports
by the owners/operators of the affected
facilities. They are also required to
maintain records of the occurrence and
duration of any startup, shutdown, or
malfunction in the operation of an
affected facility, or any period during
which the monitoring system is
inoperative. These notifications, reports,
and records are essential in determining
compliance with 40 CFR part 63,
subpart XXXX.
Form Numbers: None.
Respondents/affected entities: Rubber
tire manufacturers.
VerDate Sep<11>2014
18:06 Oct 30, 2018
Jkt 247001
Respondent’s obligation to respond:
Mandatory (40 CFR part 63, subpart
XXXX).
Estimated number of respondents: 23
(total).
Frequency of response: Initially,
occasionally, semiannually, and
annually.
Total estimated burden: 6,520 hours
(per year). Burden is defined at 5 CFR
1320.3(b).
Total estimated cost: $910,000 (per
year), which includes $0 annualized
capital/startup and/or operation &
maintenance costs.
Changes in the estimates: This ICR
reflects the requirements for on-going
compliance (existing facilities) with the
rule. The number of sources presented
in this ICR reflects current data obtained
from industry, including information on
the use of compliance alternatives used
by the affected facilities. Based on
consultations with the trade group, no
facilities are using control devices to
comply with the requirements.
Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018–23754 Filed 10–30–18; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OAR–2018–0118; FRL–9985–42–
OEI]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request;
Servicing of Motor Vehicle Air
Conditioners (Renewal)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
Servicing of Motor Vehicle Air
Conditioners (EPA ICR No. 1617.09,
OMB Control No. 2060–0247) to the
Office of Management and Budget
(OMB) for review and approval in
accordance with the Paperwork
Reduction Act. This is a proposed
extension of the ICR, which is currently
approved through December 31, 2018.
Public comments were previously
requested via the Federal Register on
June 6, 2018 during a 60-day comment
period. This notice allows for an
additional 30 days for public comments.
A fuller description of the ICR is given
below, including its estimated burden
and cost to the public. An agency may
not conduct or sponsor and a person is
SUMMARY:
PO 00000
Frm 00049
Fmt 4703
Sfmt 4703
54749
not required to respond to a collection
of information unless it displays a
currently valid OMB control number.
DATES: Comments must be submitted on
or before November 30, 2018.
ADDRESSES: Submit your comments,
referencing Docket ID No. EPA–HQ–
OAR–2018–0118, to (1) EPA online
using www.regulations.gov (our
preferred method), by email to a-and-rdocket@epa.gov, or by mail to: EPA
Docket Center, Environmental
Protection Agency, Mail Code 28221T,
1200 Pennsylvania Ave. NW,
Washington, DC 20460, and (2) OMB via
email to oira_submission@omb.eop.gov.
Address comments to OMB Desk Officer
for EPA.
EPA’s policy is that all comments
received will be included in the public
docket without change including any
personal information provided, unless
the comment includes profanity, threats,
information claimed to be Confidential
Business Information (CBI) or other
information whose disclosure is
restricted by statute.
FOR FURTHER INFORMATION CONTACT:
Christina Thompson, Stratospheric
Protection Division, Office of
Atmospheric Programs (Mail Code
6205T), Environmental Protection
Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460; telephone
number: (202) 564–0983; fax number:
(202) 343–2362; email address:
thompson.christina@epa.gov.
SUPPLEMENTARY INFORMATION:
Supporting documents, which explain
in detail the information that the EPA
will be collecting, are available in the
public docket for this ICR. The docket
can be viewed online at
www.regulations.gov or in person at the
EPA Docket Center, WJC West, Room
3334, 1301 Constitution Ave. NW,
Washington, DC. The telephone number
for the Docket Center is 202–566–1744.
For additional information about EPA’s
public docket, visit https://www.epa.gov/
dockets.
Abstract: Section 609 of the Clean Air
Act Amendments of 1990 (Act) provides
general guidelines for the servicing of
motor vehicle air conditioners (MVACs).
It states that ‘‘no person repairing or
servicing motor vehicles for
consideration may perform any service
on a motor vehicle air conditioner
involving the refrigerant for such air
conditioner without properly using
approved refrigerant recycling
equipment and no such person may
perform such service unless such person
has been properly trained and
certified.’’ In 1992, EPA developed
regulations under section 609 that were
published in 57 FR 31242, and codified
E:\FR\FM\31OCN1.SGM
31OCN1
Agencies
[Federal Register Volume 83, Number 211 (Wednesday, October 31, 2018)]
[Notices]
[Pages 54748-54749]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-23754]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OECA-2017-0200; FRL-9984-86-OEI]
Information Collection Request Submitted to OMB for Review and
Approval; Comment Request; NESHAP for Rubber Tire Manufacturing
(Reinstatement)
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency (EPA) has submitted an
information collection request (ICR), NESHAP for Rubber Tire
Manufacturing (EPA ICR No. 1982.02), to the Office of Management and
Budget (OMB) for review and approval in accordance with the Paperwork
Reduction Act. Public comments were requested previously, via the
Federal Register, on June 29, 2017 during a 60-day comment period. This
notice allows for an additional 30 days for public comments. A fuller
description of the ICR is given below, including its estimated burden
and cost to the public. An agency may neither conduct nor sponsor, and
a person is not required to respond to a collection of information
unless it displays a currently valid OMB control number.
DATES: Additional comments may be submitted on or before November 30,
2018.
ADDRESSES: Submit your comments, referencing Docket ID Number EPA-HQ-
OECA-2017-0200, to: (1) EPA online using www.regulations.gov (our
preferred method), or by email to
[[Page 54749]]
[email protected], or by mail to: EPA Docket Center, Environmental
Protection Agency, Mail Code 28221T, 1200 Pennsylvania Ave. NW,
Washington, DC 20460; and (2) OMB via email to
[email protected]. Address comments to OMB Desk Officer for
EPA.
EPA's policy is that all comments received will be included in the
public docket without change including any personal information
provided, unless the comment includes profanity, threats, information
claimed to be Confidential Business Information (CBI), or other
information whose disclosure is restricted by statute.
FOR FURTHER INFORMATION CONTACT: Patrick Yellin, Monitoring,
Assistance, and Media Programs Division, Office of Compliance, Mail
Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460; telephone number: (202) 564-2970; fax number:
(202) 564-0050; email address: [email protected].
SUPPLEMENTARY INFORMATION: Supporting documents, which explain in
detail the information that the EPA will be collecting, are available
in the public docket for this ICR. The docket can be viewed online at
www.regulations.gov or in person at the EPA Docket Center, WJC West,
Room 3334, 1301 Constitution Ave. NW, Washington, DC. The telephone
number for the Docket Center is 202-566-1744. For additional
information about EPA's public docket, visit: https://www.epa.gov/dockets.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Rubber Tire Manufacturing (40 CFR part 63,
subpart XXXX) apply to existing and new facilities that are involved in
rubber processing, tire production, tire cord production, and puncture
sealant application. New facilities include those that commenced
construction or reconstruction after the date of proposal. In general,
all NESHAP standards require initial notifications, performance tests,
and periodic reports by the owners/operators of the affected
facilities. They are also required to maintain records of the
occurrence and duration of any startup, shutdown, or malfunction in the
operation of an affected facility, or any period during which the
monitoring system is inoperative. These notifications, reports, and
records are essential in determining compliance with 40 CFR part 63,
subpart XXXX.
Form Numbers: None.
Respondents/affected entities: Rubber tire manufacturers.
Respondent's obligation to respond: Mandatory (40 CFR part 63,
subpart XXXX).
Estimated number of respondents: 23 (total).
Frequency of response: Initially, occasionally, semiannually, and
annually.
Total estimated burden: 6,520 hours (per year). Burden is defined
at 5 CFR 1320.3(b).
Total estimated cost: $910,000 (per year), which includes $0
annualized capital/startup and/or operation & maintenance costs.
Changes in the estimates: This ICR reflects the requirements for
on-going compliance (existing facilities) with the rule. The number of
sources presented in this ICR reflects current data obtained from
industry, including information on the use of compliance alternatives
used by the affected facilities. Based on consultations with the trade
group, no facilities are using control devices to comply with the
requirements.
Courtney Kerwin,
Director, Regulatory Support Division.
[FR Doc. 2018-23754 Filed 10-30-18; 8:45 am]
BILLING CODE 6560-50-P