Foreign-Trade Zone (FTZ) 75-Phoenix, Arizona; Notification of Proposed Production Activity; Microchip Technology, Inc. (Semiconductor Devices and Related Products); Chandler and Tempe, Arizona, 45094 [2018-19207]
Download as PDF
45094
Federal Register / Vol. 83, No. 172 / Wednesday, September 5, 2018 / Notices
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–54–2018]
daltland on DSKBBV9HB2PROD with NOTICES
Foreign-Trade Zone (FTZ) 75—
Phoenix, Arizona; Notification of
Proposed Production Activity;
Microchip Technology, Inc.
(Semiconductor Devices and Related
Products); Chandler and Tempe,
Arizona
Microchip Technology, Inc.
(Microchip) submitted a notification of
proposed production activity to the FTZ
Board for its facilities in Chandler and
Tempe, Arizona. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on August 28,
2018.
Microchip already has authority to
produce semiconductor devices and
related products within Subzone 75H.
The current request would add foreign
status materials/components to the
scope of authority. Pursuant to 15 CFR
400.14(b), additional FTZ authority
would be limited to the specific foreignstatus materials/components described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt Microchip from customs
duty payments on the foreign-status
materials/components used in export
production. On its domestic sales, for
the foreign-status materials/components
noted below, Microchip would be able
to choose the duty rates during customs
entry procedures that apply to: Field
programmable microcontrollers;
application-specific processors; related
memory products; and, application
development tools (duty rate ranges
from duty-free to 3%). Microchip would
be able to avoid duty on foreign-status
components which become scrap/waste.
Customs duties also could possibly be
deferred or reduced on foreign-status
production equipment.
The materials/components sourced
from abroad include: In-circuit
debuggers; rubber caps; evaporative air
coolers; antennas; plastic boxes, cases,
crates, stoppers, lids and caps; memory
modules—not incorporating a cathode
ray tube; brushless DC electric motors;
power supply, output < 50 watts; static
converters; transformers; relay
contactors; lamp-holder plugs; lamp
sockets; electrical equipment for
switching of electrical circuits; servo
drive boards (for test floor probers);
infrared lamps; printed circuit
assemblies; coaxial cables; and,
electrical conductors with fitted
VerDate Sep<11>2014
17:04 Sep 04, 2018
Jkt 244001
connections (duty rate ranges from dutyfree to 5.3%). The request indicates that
certain materials/components are
subject to special duties under Section
301 of the Trade Act of 1974 (Section
301), depending on the country of
origin. The applicable Section 301
decision requires subject merchandise
to be admitted to FTZs in privileged
foreign status (19 CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is
October 15, 2018.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202)
482–0473.
Dated: August 29, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018–19207 Filed 9–4–18; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–580–867]
Large Power Transformers From the
Republic of Korea: Notice of Final
Results of Antidumping Duty Changed
Circumstances Review
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The Department of Commerce
(Commerce) finds that Hyundai Electric
& Energy Systems Co., Ltd. (HEES) is the
successor-in-interest to Hyundai Heavy
Industries Co., Ltd. (HHI) and that HHI’s
current cash deposit rate is the
applicable rate for all entries of the
subject merchandise exported by HEES.
In addition, we determine that facts
presented in this changed circumstances
review (CCR) warrant the retroactive
application of the cash deposit rate to
the effective date of the first entry by
HEES.
DATES: Applicable September 5, 2018.
FOR FURTHER INFORMATION CONTACT: John
C. McGowan, AD/CVD Operations,
Office VI, Enforcement and Compliance,
AGENCY:
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–3019.
SUPPLEMENTARY INFORMATION:
Background
On August 31, 2012, Commerce
published in the Federal Register an
antidumping duty order on large power
transformers (LPTs) from the Republic
of Korea (Korea).1 HHI was one of the
producers/exporters reviewed in the
less-than fair-value investigation and
has been reviewed in each subsequent
administrative review of the Order.
During the 2014–2015 administrative
review, covering the period August 1,
2014, through July 31, 2015, Commerce
assigned HHI an antidumping duty rate
of 60.81 percent, finding that the
application of total adverse facts
available (AFA) was warranted.2 In
addition, during the 2015–2016
administrative review, covering the
period August 1, 2015, through July 31,
2016, Commerce continued to assign
HHI an antidumping duty rate of 60.81
percent, finding that the application of
total AFA was warranted.3
Pursuant to section 751(b)(1) of the
Tariff Act of 1930, as amended (the Act)
and 19 CFR 351.216(d), on December 4,
2017, Commerce self-initiated a CCR
regarding HHI’s new spin off company,
HEES, based on information obtained:
(1) During the course of the 2014/2015
and 2015/2016 administrative reviews;
(2) via public search and a phone
conversation with a representative
retained by ABB Inc.’s (ABB’s or the
petitioner’s) counsel; and (3) from U.S.
Customs and Border Protection (CBP)
data.4
On May 31, 2018, Commerce issued
the Preliminary Results of this CCR, in
which it determined that: (1) HEES is
the successor-in-interest to HHI; (2)
HHI’s current cash deposit rate is the
rate applicable for all entries of LPTs
exported by HEES; and (3) the
application of the cash deposit rate
applicable to HEES shall be made
1 See Large Power Transformers from the
Republic of Korea: Antidumping Duty Order, 77 FR
53177 (August 31, 2012) (the Order).
2 See Large Power Transformers from the
Republic of Korea: Final Results of Antidumping
Duty Administrative Review; 2014–2015, 82 FR
13432 (March 13, 2017) (2014/2015 Final Results).
3 See Large Power Transformers from the
Republic of Korea: Final Results of Antidumping
Duty Administrative Review; 2015–2016, 83 FR
11679 (March 16, 2018) (2015–2016 Final Results).
4 See Large Power Transformers from the
Republic of Korea: Initiation of Antidumping Duty
Changed Circumstances Review, 82 FR 57210
(December 4, 2017) (Initiation Notice).
E:\FR\FM\05SEN1.SGM
05SEN1
Agencies
[Federal Register Volume 83, Number 172 (Wednesday, September 5, 2018)]
[Notices]
[Page 45094]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-19207]
[[Page 45094]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-54-2018]
Foreign-Trade Zone (FTZ) 75--Phoenix, Arizona; Notification of
Proposed Production Activity; Microchip Technology, Inc. (Semiconductor
Devices and Related Products); Chandler and Tempe, Arizona
Microchip Technology, Inc. (Microchip) submitted a notification of
proposed production activity to the FTZ Board for its facilities in
Chandler and Tempe, Arizona. The notification conforming to the
requirements of the regulations of the FTZ Board (15 CFR 400.22) was
received on August 28, 2018.
Microchip already has authority to produce semiconductor devices
and related products within Subzone 75H. The current request would add
foreign status materials/components to the scope of authority. Pursuant
to 15 CFR 400.14(b), additional FTZ authority would be limited to the
specific foreign-status materials/components described in the submitted
notification (as described below) and subsequently authorized by the
FTZ Board.
Production under FTZ procedures could exempt Microchip from customs
duty payments on the foreign-status materials/components used in export
production. On its domestic sales, for the foreign-status materials/
components noted below, Microchip would be able to choose the duty
rates during customs entry procedures that apply to: Field programmable
microcontrollers; application-specific processors; related memory
products; and, application development tools (duty rate ranges from
duty-free to 3%). Microchip would be able to avoid duty on foreign-
status components which become scrap/waste. Customs duties also could
possibly be deferred or reduced on foreign-status production equipment.
The materials/components sourced from abroad include: In-circuit
debuggers; rubber caps; evaporative air coolers; antennas; plastic
boxes, cases, crates, stoppers, lids and caps; memory modules--not
incorporating a cathode ray tube; brushless DC electric motors; power
supply, output < 50 watts; static converters; transformers; relay
contactors; lamp-holder plugs; lamp sockets; electrical equipment for
switching of electrical circuits; servo drive boards (for test floor
probers); infrared lamps; printed circuit assemblies; coaxial cables;
and, electrical conductors with fitted connections (duty rate ranges
from duty-free to 5.3%). The request indicates that certain materials/
components are subject to special duties under Section 301 of the Trade
Act of 1974 (Section 301), depending on the country of origin. The
applicable Section 301 decision requires subject merchandise to be
admitted to FTZs in privileged foreign status (19 CFR 146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is October 15, 2018.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
Board's website, which is accessible via www.trade.gov/ftz.
For further information, contact Elizabeth Whiteman at
[email protected] or (202) 482-0473.
Dated: August 29, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018-19207 Filed 9-4-18; 8:45 am]
BILLING CODE 3510-DS-P