Certain New Chemical Substances; Receipt and Status Information for January 2018, 24110-24116 [2018-11194]
Download as PDF
<![CDATA[
24110
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
Background on the registration review
program is provided at: https://
www.epa.gov/pesticide-reevaluation.
Authority: 7 U.S.C. 136 et seq.
Dated: May 14, 2018.
Yu-Ting Guilaran,
Director, Pesticide Re-Evaluation Division,
Office of Pesticide Programs.
[FR Doc. 2018–11193 Filed 5–23–18; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2017–0715; FRL–9977–48]
Certain New Chemical Substances;
Receipt and Status Information for
January 2018
FOR FURTHER INFORMATION CONTACT:
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA Section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application under Biotech exemption;
an application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from January 1, 2018
to January 31, 2018.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
June 25, 2018.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2017–0715,
and the specific case number for the
chemical substance related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
sradovich on DSK3GMQ082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
For technical information contact: Jim
Rahai, Information Management
Division (MC 7407M), Office of
Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
January 1, 2018 to January 31, 2018. The
Agency is providing notice of receipt of
PMNs, SNUNs and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
PO 00000
Frm 00030
Fmt 4703
Sfmt 4703
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
E:\FR\FM\24MYN1.SGM
24MYN1
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7)). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received
by EPA during this period, Table I
provides the following information (to
the extent that such information is not
24111
subject to a CBI claim) on the notices
received by EPA during this period: The
EPA case number assigned to the notice,
a notation of whether the submission is
an initial submission, or an amendment,
a notation of which version was
received, the date the notice was
received by EPA, the submitting
manufacturer (i.e., domestic producer or
importer), the potential uses identified
by the manufacturer in the notice, and
the chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number and the
version column will note ‘‘Initial
submission’’. Submissions which are
amendments to previous submissions
will have a case number followed by the
letter ‘‘A’’ (e.g., P–18–1234A). The
version column designates submissions
in sequence as ‘‘1’’, ‘‘2’’, ‘‘3’’, etc. Note
that in some cases, an initial submission
is not numbered as version 1; this is
because earlier version(s) were rejected
as incomplete or invalid submissions.
Note also that future versions of the
following tables may adjust slightly as
the Agency works to automate
population of the data in the tables.
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 1/2/2018 TO 1/31/2018
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(G) Alkyl ester, 2-({4-[2-(trisubstituted
phenyl)azo]-5-acetamido-2-substitutedphenyl}
(substituted alkoxy)amino).
(G) Alkyl ester, 2-({5-acetamido-2-alkoxy-4-[2(substituted-2,1-benzothiazol-3-yl)azo]
pheny]}(disubstituted)amino).
(G) 3-Pyridinecarbonitrile, 1,2-dihydrotrisubstituted-5-[2-(disubstituted phenyl)azo]2-oxo.
(S) Flue dust, glass manufg. desulfurization.
3
1/22/2018
CBI ...................
(G) A colorant for dyeing various synthetic fibers
and fabrics. Open, non-dispersive use.
P–16–0405A ..........
6
1/25/2018
CBI ...................
(G) A colorant for dyeing various synthetic fibers
and fabrics. Open, non-dispersive use.
P–16–0408A ..........
3
1/25/2018
CBI ...................
(G) A colorant for dyeing various synthetic fibers
and fabrics. Open, non-dispersive use.
P–16–0421A ..........
3
1/17/2018
P–17–0221A ..........
3
1/17/2018
Guardian Industries Corp.
CBI ...................
(S) Additive to facilitate melting of sand during
manufacture of glass.
(G) Coating polymer ............................................
P–17–0281A ..........
P–17–0282A ..........
6
6
1/12/2018
1/12/2018
CBI ...................
Elantas PDG,
Inc.
P–17–0319A ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–16–0404A ..........
6
1/26/2018
P–17–0385A ..........
4
1/23/2018
Inolex Chemical
Company.
Al-Fares Corp ..
P–17–0424A ..........
2
1/4/2018
(G) Water reducible resin ....................................
(S) This is a component of a mixture that is
used as an impregnating varnish for stators
and motors.
(S) This material will be used an emollient for a
fabric softener/conditioning product.
(S) Cleaning product for detailing vehicles. Industrial use emollient.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
Johnson
Matthey Inc.
PO 00000
Frm 00031
Fmt 4703
Sfmt 4703
(G) Alkylheterocyclic amine blocked isocyanate,
alkoxysilane polymer.
(G) Polysiloxane-polyester polyol carboxylate.
(S) Isocyanic acid, polymethylenepolyphenylene
ester, caprolactam- and phenol-blocked.
(S) L-Isoleucine, C18-22-alkyl esters,
ethanesulfonates.
(S) Carbonic acid, bis(2-ethylhexyl) ester.
(S) Benzoic acid, 2-chloro-3-methyl-, sodium
salt (1:1).
E:\FR\FM\24MYN1.SGM
24MYN1
24112
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 1/2/2018 TO 1/31/2018—Continued
Case No.
Version
Received
date
Manufacturer
2
1/4/2018
Johnson
Matthey Inc.
P–17–0426A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0427A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0428A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0429A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0430A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0431A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0432A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0433A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0434A ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–17–0425A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0435A ..........
2
1/4/2018
Johnson
Matthey Inc.
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
PO 00000
Use
Chemical substance
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
Frm 00032
Fmt 4703
Sfmt 4703
(S) Benzoic acid, 3-chloro-2-methyl-, sodium
salt (1:1).
(S) Benzoic acid, 3-chloro-4-methyl-, sodium
salt (1:1).
(S) Benzoic acid, 2-chloro-5-methyl-, sodium
salt (1:1).
(S) Benzoic acid, 4-chloro-2-methyl-, sodium
salt (1:1).
(S) Benzoic acid, 3-fluoro-2-methyl-, sodium salt
(1:1).
(S) Benzoic acid, 3-fluoro-4-methyl-, sodium salt
(1:1).
(S) Benzoic acid, 4-fluoro-2-methyl-, sodium salt
(1:1).
(S) Benzoic acid, 2-fluoro-4-methyl-, sodium salt
(1:1).
(S) Benzoic acid, 2-fluoro-3-methyl-, sodium salt
(1:1).
(S) Benzoic acid, 2,3,6-trifluoro-, sodium salt
(1:1).
(S) Benzoic acid, 3-fluoro-2-(trifluoromethyl)-,
sodium salt(1:1).
E:\FR\FM\24MYN1.SGM
24MYN1
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
24113
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 1/2/2018 TO 1/31/2018—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
2
1/4/2018
Johnson
Matthey Inc.
P–17–0437A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0438A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0439A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–17–0440A ..........
2
1/4/2018
Johnson
Matthey Inc.
P–18–0020A ..........
2
1/23/2018
Myriant Corporation.
P–18–0036A ..........
3
1/24/2018
CBI ...................
(G) Water repellant .............................................
P–18–0041A ..........
2
1/3/2018
Myriant Corporation.
(G) Intermediate polyol for further reaction ........
P–18–0041A ..........
3
1/23/2018
Myriant Corporation.
(G) Intermediate polyol for further reaction ........
P–18–0041A ..........
4
1/29/2018
Myriant Corporation.
(G) Intermediate polyol for further reaction ........
P–18–0042A ..........
3
1/3/2018
Myriant Corporation.
(G) Industrial coating ...........................................
P–18–0042A ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–17–0436A ..........
4
1/23/2018
Myriant Corporation.
(G) Industrial coating ...........................................
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
PO 00000
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(S) Tracer chemical: Used as a tracer in water
solution to measure flow in deep oil or gas
bearing strata; when in a solid blend with
polymer to measure flow in deep oil or gas
bearing strata; or in a solid proppant bead
form used to measure flow in deep oil or gas
bearing strata.
(G) Industrial coating ...........................................
Frm 00033
Fmt 4703
Sfmt 4703
(S) Benzoic acid, 2-fluoro-4-(trifluoromethyl)-,
sodium salt (1:1).
(S) Benzoic acid, 2-fluoro-6-(trifluoromethyl)-,
sodium salt (1:1).
(S) Benzoic acid, 3-fluoro-5-(trifluoromethyl)-,
sodium salt (1:1).
(S) Benzoic acid, 4-fluoro-3-(trifluoromethyl)-,
sodium salt (1:1).
(S) Benzoic acid, 4-fluoro-2-(trifluoromethyl)-,
sodium salt (1:1).
(S) Butanediolic acid, polyol with 2-ethyl-2(hydroxymethyl)-1,3-propanediol, 2,5Furandione and 1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano-1Hinden-5(or 6)-yl ester.
(S) Siloxanes and Silicones, di-Me, 3-[3carboxy-2(or 3)-(octenyl)-1-oxopropoxy]propyl
group-terminated.
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano- 1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate.
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano- 1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate.
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano- 1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate.
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano-1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate, polymer with
5-isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane, 2-hydroxyethyl acrylateand 2-hydroxyethyl methacrylate-blocked.
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano-1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate, polymer with
5-isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane, 2-hydroxyethyl acrylateand 2-hydroxyethyl methacrylate-blocked.
E:\FR\FM\24MYN1.SGM
24MYN1
24114
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 1/2/2018 TO 1/31/2018—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
Myriant Corporation.
(G) Industrial coating ...........................................
(S) 2,5-Furandione, polymer with 2-ethyl-2(hydroxymethyl)-1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano-1Hinden-5(or 6)-yl ester, ester with 2,3dihydroxypropyl neodecanoate, polymer with
5-isocyanato-1-(isocyanatomethyl)-1,3,3trimethylcyclohexane, 2-hydroxyethyl acrylateand 2-hydroxyethyl methacrylate-blocked.
(S) Phosphonium, trihexyltetradecyl-, salt with
1,1,1-trifluoro-n[(trifluoromethyl)sulfonyl]methanesulfonamide
(1:1).
(G) Waste plastics, polyester, depolymd. with
glycols, polymers with dicarboxylic acids.
(G) Waste plastics, polyester, depolymd. with
glycols, polymers with dicarboxylic acids.
(G) Aspartic acid, tallow modified diester.
5
1/29/2018
P–18–0058A ..........
2
1/8/2018
CBI ...................
(S) Component of electroconductive low-noise
grease for long-term lubrication of capped or
sealed ball bearings.
P–18–0070 ............
3
1/4/2018
Arrowstar, LLC
P–18–0070A ..........
5
1/16/2018
Arrowstar, LLC
P–18–0082 ............
2
1/12/2018
P–18–0083 ............
1
1/3/2018
Cytec Industries
Inc.
CBI ...................
(G) Chemical intermediate for polyurethane industry.
(G) Chemical intermediate for polyurethane industry.
(S) Isolated intermediate used in the manufacture of a surface-active agent.
(G) Dispersant additive .......................................
P–18–0083A ..........
5
1/8/2018
CBI ...................
(G) Dispersant additive .......................................
P–18–0085 ............
1
1/8/2018
CBI ...................
(G) Industrial use in oilfied ..................................
P–18–0086 ............
P–18–0087 ............
1
1
1/10/2018
1/11/2018
2
1/22/2018
P–18–0088 ............
1
1/16/2018
CBI ..................
Genesee Polymers Corporation.
Genesee Polymers Corporation.
CBI ..................
(S) Intermediate for a polyurethane catalyst ......
(S) UV curing agent, silicone rubber cross linker
P–18–0087A ..........
P–18–0090 ............
1
1/17/2018
Preschooltourinc.
(S) Water reducing agent for use in concrete ....
P–18–0091 ............
1
1/17/2018
Resinate Materials Group,
Inc.
(S) Intermediate for use in the manufacture of
polymers.
P–18–0092 ............
2
1/26/2018
P–18–0093 ............
1
1/23/2018
Shell chemical
lp—martinez
catalyst plant.
CBI ..................
(G) The TBPMI chemical is used as a catalyst,
the catalyst is imported and used in the manufacture of monoethlyene glycol (MEG).
(G) Additive to plastics ........................................
P–18–0093A ..........
2
1/24/2018
CBI ...................
(G) Additive to plastics ........................................
P–18–0094 ............
1
1/23/2018
CBI ..................
(G) Additive to plastics ........................................
P–18–0094A ..........
2
1/24/2018
CBI ...................
(G) Additive to plastics ........................................
P–18–0095 ............
1
1/23/2018
CBI ..................
(G) Additive to plastics ........................................
P–18–0095A ..........
sradovich on DSK3GMQ082PROD with NOTICES
P–18–0042A ..........
2
1/24/2018
CBI ...................
(G) Additive to plastics ........................................
P–18–0096 ............
1
1/23/2018
Allnex USA Inc
(G) UV cured coating resin .................................
P–18–0096A ..........
2
1/24/2018
Allnex USA Inc
(G) UV cured coating resin .................................
P–18–0096A ..........
3
1/24/2018
Allnex USA Inc
(G) UV cured coating resin .................................
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
PO 00000
(S) 2-propenoic acid, telomers with bu alc.-2-[(2propen-1-yloxy)methyl]oxirane reaction products, sodium bisulfite and sodium 2-hydroxy3-(2-propen-1-yloxy)-1-propanesulfonate (1:1),
sodium salts, peroxydisulfuric acid
([(ho)s(o)2]2o2) sodium salt (1:2)-initiated.
(S) 2-propenoic acid, telomers with bu alc.-2-[(2propen-1-yloxy)methyl]oxirane reaction products, sodium bisulfite and sodium 2-hydroxy3-(2-propen-1-yloxy)-1-propanesulfonate (1:1),
sodium salts, peroxydisulfuric acid
([(ho)s(o)2]2o2) sodium salt (1:2)-initiated.
(G) Fatty acids reaction products with
ethyleneamines and dialkyl ester.
(G) Propanenitrile, polyalkylpolyamine.
(S) 1-propanethiol, 3,3′-(1,1,3,3-tetramethyl-1,3disiloxanediyl)bis-.
(S) UV curing agent, silicone rubber cross linker
(S) 1-propanethiol, 3,3′-(1,1,3,3-tetramethyl-1,3disiloxanediyl)bis-.
(G) Oil and gas production .................................
(G) Di(substituted-1,3-trialkylammonium)
dialkylammonium salt.
(G) Alkenoic acid, alkyl-, polymer with alkenoic
acid, ester with .alpha.-alkyl-.omega.hydroxypoly(oxy-1,2-ethanediyl), salt.
(G) Vegetable oil, polymers with diethylene
glycol- and polyol- and polyethylene glycoldepolymd. poly(ethylene terephthalate) waste
plastics and arylcarboxylic acid anhydride.
(S) Tri-butyl methyl phosphonium iodide.
Frm 00034
Fmt 4703
Sfmt 4703
(G) Pentacyclo[9.5.1.13,9.15,15.17,13]octasil
oxane, 1,3,5,7,9,11,13,15-octakis
(polyfluoroalkyl)-.
(G) Pentacyclo[9.5.1.13,9.15,15.17,13]octasi
loxane, 1,3,5,7,9,11,13,15-octakis
(polyfluoroalkyl)-.
(G) Pentacyclo[9.5.1.13,9.15,15.17,
13]octasiloxanealkylsubstituted,
3,5,7,9,11,13,15-heptakis(polyfluoroalkyl)-.
(G) Pentacyclo[9.5.1.13,9.15,15.17,13]
octasiloxanealkylsubstituted, 3,5,7,9,11,13,15heptakis(polyfluoroalkyl)-.
(G) Pentacyclo[9.5.1.13,9.15,15.17,13]
octasiloxanealkanol,3 3,5,7,9,11,13,15-heptakis
(polyfluoroalkyl)-, acetate.
(G) Pentacyclo[9.5.1.13,9.15,15.17,13]
octasiloxanealkanol, 3,5,7,9,11,13,15-heptakis
(polyfluoroalkyl)-, acetate.
(G) Halosubstituted carbopolycycle, polymer
with substituted carbomonocycles and
oxybis[alkanol].
(G) Halosubstituted carbopolycycle, polymer
with substituted carbomonocycles and
oxybis[alkanol].
(G) Halosubstituted carbopolycycle, polymer
with substituted carbomonocycles and
oxybis[alkanol].
E:\FR\FM\24MYN1.SGM
24MYN1
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
24115
TABLE I—PMN/SNUN/MCANS RECEIVED FROM 1/2/2018 TO 1/31/2018—Continued
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
(S) 1,3-dioxane, 2-(3,3-dimethyl-1-cyclohexen-1yl)-2,5,5-trimethly-.
P–18–0097 ............
1
1/24/2018
MANE USA ......
P–18–0098 ............
1
1/24/2018
Allnex USA Inc
(S) Maderal is a fragrance that will be added to
consumer care products, personal care products, fine fragrances.
(S) Dispersing additive for pigments ...................
P–18–0099 ............
1
1/25/2018
CBI ..................
(G) Photoinitiator .................................................
P–18–0100 ............
1
1/26/2018
Allnex USA Inc
(G) UV curable coating resin ..............................
P–18–0101 ............
3
1/30/2018
CBI ..................
(G) Industrial .......................................................
P–18–0102 ............
1
1/26/2018
Allnex USA Inc
(G) UV curable coating Resin .............................
J–18–0001A ..........
2
1/3/2018
Zea 2, LLC ......
(S) For the production of L-alanine .....................
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not subject to
a CBI claim) on the TMEs received by
EPA during this period: The EPA case
number assigned to the TME, the
submission document type (initial or
amended), the version number, the date
the TME was received by EPA, the
submitting manufacturer (i.e., domestic
(G) Polyphosphoric acids, polymers with
(alkoxyalkoxy)alkanol and substituted
heteromonocycle.
(S) Methanone,1,1′-(diethylgermylene)bis(1-(4methoxyphyenyl).
(G) Substituted alkanoic acid polymer with
alkylcarbonate, alkanediols and isocyanate
substituted carbomonocycles, sodium salt,
alkanoic acid-substituted polyol reaction products-blocked.
(G) Pentaerythritol, mixed esters with linear and
branched fatty acids.
(G) Alkanoic acid, ester with
[oxybis(alkylene)]bis[alkyl-substituted
alkanediol], polymer with alkylcarbonate,
alkanediols, substituted alkanoic acid and
isocyanate and alkyl substituted
carbomonocycle, sodium salt.
(G) modified Corynebacterium glutamicum.
producer or importer), the potential uses
identified by the manufacturer in the
TME, and the chemical substance
identity.
TABLE II—TMES AND BIOTECH EXEMPTIONS RECEIVED FROM 1/2/2018 TO 1/31/2018
Case No.
Version
T–18–0002 ............
2
Received
date
1/30/2018
Manufacturer
Use
CBI ..................
(G) Industrial use ...............................................
In Table III of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs received by EPA
during this period: The EPA case
Chemical substance
number assigned to the NOC, the
submission document type (initial or
amended), the date the NOC was
received by EPA, the date of
commencement provided by the
(G) Pentaerythritol, mixed esters with linear
and branched fatty acids.
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE III—NOCS RECEIVED FROM 1/2/2018 TO 1/31/2018
Received
date
Case No.
Commencement
date
If amendment, type
of amendment
Chemical substance
(G) Hexanedioic acid, polymer with alkanediol, dimethyl carbonate,
alkanediol, hydroxy-(hydroxyalkyl)-alkylpropanoic acid, 1,1′methylenebis[4-isocyanatocyclohexane], substituted alkyl
diamine and lactone, compd. with alkyl amine.
(G) Cyclohexanedicarboxylic acid, dialkyl ester.
(G) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-hydro-.omega.[[[dialkyl-(morpholinyl)alkylidene]amino]alkylethoxy]-, ether with
alkyl-(hydroxyalkyl)-alkanediol.
(S) Siloxanes and Silicones, di-Me, 3-(2-hydroxyphenyl)propyl
group-terminated, polymers with 1,4-benzenedicarbonyl dichloride, bisphenol A and carbonic dichloride, 4-(1,1dimethylethyl)phenyl esters.
(G) Benzoic acid, alkyl-2-hydroxyl-, branched and linear, monosodium salts Benzoic acid, 2-hydroxyalkyl-, branched and linear,
monosodium salts.
(G) Substituted alkyl reaction products with modified 1-(1,1dimethylethoxy)-4-ethenylbenzene-styrene polymer.
(G) Fluorinated acrylic copolymer.
1/1/2018
7/1/2010
...............................
P–12–0124A .....
P–13–0193 .......
1/5/2018
1/4/2018
12/22/2017
4/16/2014
Specific Name .......
...............................
P–15–0738 .......
1/19/2018
12/30/2017
...............................
P–16–0233 .......
sradovich on DSK3GMQ082PROD with NOTICES
P–10–0203 .......
1/23/2018
1/17/2018
...............................
P–16–0376A .....
1/19/2018
12/6/2017
Generic Name .......
P–17–0175A .....
1/8/2018
11/21/2017
Generic Name .......
VerDate Sep<11>2014
18:10 May 23, 2018
Jkt 244001
PO 00000
Frm 00035
Fmt 4703
Sfmt 4703
E:\FR\FM\24MYN1.SGM
24MYN1
24116
Federal Register / Vol. 83, No. 101 / Thursday, May 24, 2018 / Notices
TABLE III—NOCS RECEIVED FROM 1/2/2018 TO 1/31/2018—Continued
Received
date
Case No.
Commencement
date
If amendment, type
of amendment
Chemical substance
(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2-propen-1yl)oxy]ethyl ester, polymer with cycloalkyl 2-methyl-2propenoate, ethenylbenzene, 2-ethylhexyl 2- propenoate, methyl
2-methyl-2-propenoate and 2-methylpropyl 2-methyl-2propenoate.
(S) 1,6,10-Dodecatriene, 7,11-dimethyl-3-methylene-, (6E)-,
homopolymer, hydrogenated, 2-hydroxyethyl-terminated.
(G) Allyloxymethylacrylate.
(S) Silsesquioxanes, 2,4,4-trimethylpentyl, hydroxy-terminated.
(G) Alkyl alkenoic acid, alkyl ester, polymer with alkyl alkenoate,
dialkyl alkanediol, substituted carbomonocycle, disubstituted
heteromonocycle, disubstituted heteropolycyclic, alkanediol, substituted alkyl alkyl alkenoate and substituted heteromonocycle,
dialkyl peroxide initiated.
P–17–0190 .......
1/24/2018
1/3/2018
...............................
P–17–0237 .......
1/25/2018
1/10/2018
...............................
P–17–0326 .......
P–18–0026 .......
P–18–0032 .......
1/19/2018
1/8/2018
1/12/2018
1/16/2018
1/8/2018
12/14/2017
...............................
...............................
...............................
In Table IV of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information received
by EPA during this time period: The
EPA case number assigned to the test
information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE IV—TEST INFORMATION RECEIVED FROM 1/1/2018 TO 1/31/2018
Case No.
Received date
J–18–0001 ........
1/25/2018
P–14–0321 ........
1/19/2018
P–16–0206
P–16–0543
P–17–0005
P–17–0302
........
........
........
........
1/19/2018
1/25/2018
1/4/2018
1/25/2018
P–17–0364 ........
1/15/2018
P–17–0382 ........
1/19/2018
P–18–0007 ........
1/22/2018
P–18–0076 ........
1/5/2018
Type of test information
Document describing experiments validating cell inactivation methods. Includes narrative, data.
2-week Whole-Body Inhalation toxicity study (OECD
412).
Water Solubility (OECD 105) ......................................
Air Quality monthly monitoring report .........................
(1) Test Plan for Inhalation Test (OECD 412) ...........
(1) Read Across Justification ......................................
(2) Mouse Lymphoma Assay (OECD 476).
(3) Chromosome Aberration Assay (OECD 473).
(4) Pre-Natal Developmental Assay (OECD 414).
(1) 90 Day Repeated Dose Assay (OECD 408).
(1) Particle Size Distribution Surface Tension Study
(1) Fish Juvenile Growth (OECD 215) .......................
(1) Daphia Reproduction Test (OECD 211).
Local Lymph Node Assay (OECD 429) .....................
(1) Test study in Male and Female Wistar Rats Oral
Administration (Gavage).
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described above
to access additional non-CBI
information that may be available.
sradovich on DSK3GMQ082PROD with NOTICES
Authority: 15 U.S.C. 2601 et seq.
[FR Doc. 2018–11194 Filed 5–23–18; 8:45 am]
BILLING CODE 6560–50–P
18:10 May 23, 2018
Jkt 244001
(G) Modified Corynebacterium glutamicum.
(S) 2-Chloro-1,1,1,2-Tetrafluoropropane(244bb).
(G) Formaldehyde ketone condensate polymer.
(G) Halogenophosphoric acid metal salt.
(S) 1-Tetradecene homopolymer hydrogenated.
(G) Neopentyl Glycol Ester of Mixed Linear and
Branched Carboxylic Acids.
(G) Dicyloalkyl-alkane-di-isocyanate homopolymer,
alkyl alcohol and polyalkyl glycol mono-alkyl-etherblocked.
(S) Amides, tallow, N,N-bis(2-hydroxypropyl).
(S) Glycerides, soya mono- and di-, epoxidized, acetates.
(G) 1,3,5-Triazine-2,4-Diamine Derivative.
FEDERAL DEPOSIT INSURANCE
CORPORATION
Agency Information Collection
Activities: Proposed Collection
Renewal; Comment Request (OMB No.
3064–0134)
Federal Deposit Insurance
Corporation (FDIC).
AGENCY:
Dated: May 4, 2018.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
VerDate Sep<11>2014
Chemical substance
ACTION:
Notice and request for comment.
The FDIC, as part of its
continuing effort to reduce paperwork
and respondent burden, invites the
general public and other Federal
agencies to take this opportunity to
comment on the renewal of the existing
information collection, as required by
SUMMARY:
PO 00000
Frm 00036
Fmt 4703
Sfmt 4703
the Paperwork Reduction Act of 1995.
Currently, the FDIC is soliciting
comment on the renewal of the
information collection described below.
DATES: Comments must be submitted on
or before July 23, 2018.
ADDRESSES: Interested parties are
invited to submit written comments to
the FDIC by any of the following
methods:
• https://www.FDIC.gov/regulations/
laws/federal.
• Email: comments@fdic.gov. Include
the name and number of the collection
in the subject line of the message.
• Mail: Jennifer Jones (202–898–
6768), Counsel, MB–3105, Federal
Deposit Insurance Corporation, 550 17th
Street NW, Washington, DC 20429.
E:\FR\FM\24MYN1.SGM
24MYN1
]]>Agencies
[Federal Register Volume 83, Number 101 (Thursday, May 24, 2018)]
[Notices]
[Pages 24110-24116]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-11194]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2017-0715; FRL-9977-48]
Certain New Chemical Substances; Receipt and Status Information
for January 2018
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA Section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application under Biotech exemption; an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from January
1, 2018 to January 31, 2018.
DATES: Comments identified by the specific case number provided in this
document must be received on or before June 25, 2018.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2017-0715, and the specific case number for the
chemical substance related to your comment, by one of the following
methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Information
Management Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from January 1, 2018 to January 31, 2018. The Agency is
providing notice of receipt of PMNs, SNUNs and MCANs (including amended
notices and test information); an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on new chemical substances that are currently under EPA review or have
recently concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate,
before initiating the activity. EPA will review the notice, make a risk
determination on the chemical substance or significant new use, and
take appropriate action as described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
[[Page 24111]]
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7)). Since the
passage of the Lautenberg amendments to TSCA in 2016, public interest
in information on the status of section 5 cases under EPA review and,
in particular, the final determination of such cases, has increased. In
an effort to be responsive to the regulated community, the users of
this information, and the general public, to comply with the
requirements of TSCA, to conserve EPA resources and to streamline the
process and make it more timely, EPA is providing information on its
website about cases reviewed under the amended TSCA, including the
section 5 PMN/SNUN/MCAN and exemption notices received, the date of
receipt, the final EPA determination on the notice, and the effective
date of EPA's determination for PMN/SNUN/MCAN notices on its website
at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is
updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs received by EPA during this period, Table I
provides the following information (to the extent that such information
is not subject to a CBI claim) on the notices received by EPA during
this period: The EPA case number assigned to the notice, a notation of
whether the submission is an initial submission, or an amendment, a
notation of which version was received, the date the notice was
received by EPA, the submitting manufacturer (i.e., domestic producer
or importer), the potential uses identified by the manufacturer in the
notice, and the chemical substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number and the version column
will note ``Initial submission''. Submissions which are amendments to
previous submissions will have a case number followed by the letter
``A'' (e.g., P-18-1234A). The version column designates submissions in
sequence as ``1'', ``2'', ``3'', etc. Note that in some cases, an
initial submission is not numbered as version 1; this is because
earlier version(s) were rejected as incomplete or invalid submissions.
Note also that future versions of the following tables may adjust
slightly as the Agency works to automate population of the data in the
tables.
Table I--PMN/SNUN/MCANs Received From 1/2/2018 to 1/31/2018
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-16-0404A............... 3 1/22/2018 CBI................. (G) A colorant for (G) Alkyl ester, 2-
dyeing various ({4-[2-
synthetic fibers (trisubstituted
and fabrics. Open, phenyl)azo]-5-
non-dispersive use. acetamido-2-
substitutedphenyl{
t (substituted
alkoxy)amino).
P-16-0405A............... 6 1/25/2018 CBI................. (G) A colorant for (G) Alkyl ester, 2-
dyeing various ({5-acetamido-2-
synthetic fibers alkoxy-4-[2-
and fabrics. Open, (substituted-2,1-
non-dispersive use. benzothiazol-3-
yl)azo]
pheny]{time} (disu
bstituted)amino).
P-16-0408A............... 3 1/25/2018 CBI................. (G) A colorant for (G) 3-
dyeing various Pyridinecarbonitri
synthetic fibers le, 1,2-dihydro-
and fabrics. Open, trisubstituted-5-
non-dispersive use. [2-(disubstituted
phenyl)azo]-2-oxo.
P-16-0421A............... 3 1/17/2018 Guardian Industries (S) Additive to (S) Flue dust,
Corp. facilitate melting glass manufg.
of sand during desulfurization.
manufacture of
glass.
P-17-0221A............... 3 1/17/2018 CBI................. (G) Coating polymer (G)
Alkylheterocyclic
amine blocked
isocyanate,
alkoxysilane
polymer.
P-17-0281A............... 6 1/12/2018 CBI................. (G) Water reducible (G) Polysiloxane-
resin. polyester polyol
carboxylate.
P-17-0282A............... 6 1/12/2018 Elantas PDG, Inc.... (S) This is a (S) Isocyanic acid,
component of a polymethylenepolyp
mixture that is henylene ester,
used as an caprolactam- and
impregnating phenol-blocked.
varnish for
stators and motors.
P-17-0319A............... 6 1/26/2018 Inolex Chemical (S) This material (S) L-Isoleucine,
Company. will be used an C18-22-alkyl
emollient for a esters,
fabric softener/ ethanesulfonates.
conditioning
product.
P-17-0385A............... 4 1/23/2018 Al-Fares Corp....... (S) Cleaning (S) Carbonic acid,
product for bis(2-ethylhexyl)
detailing ester.
vehicles.
Industrial use
emollient.
P-17-0424A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as chloro-3-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
[[Page 24112]]
P-17-0425A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as chloro-2-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0426A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as chloro-4-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0427A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as chloro-5-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0428A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4-
chemical: Used as chloro-2-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0429A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as fluoro-2-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0430A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as fluoro-4-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0431A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4-
chemical: Used as fluoro-2-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0432A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as fluoro-4-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0433A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as fluoro-3-methyl-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0434A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid,
chemical: Used as 2,3,6-trifluoro-,
a tracer in water sodium salt (1:1).
solution to
measure flow in
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0435A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as fluoro-2-
a tracer in water (trifluoromethyl)-
solution to , sodium
measure flow in salt(1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
[[Page 24113]]
P-17-0436A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as fluoro-4-
a tracer in water (trifluoromethyl)-
solution to , sodium salt
measure flow in (1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0437A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 2-
chemical: Used as fluoro-6-
a tracer in water (trifluoromethyl)-
solution to , sodium salt
measure flow in (1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0438A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 3-
chemical: Used as fluoro-5-
a tracer in water (trifluoromethyl)-
solution to , sodium salt
measure flow in (1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0439A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4-
chemical: Used as fluoro-3-
a tracer in water (trifluoromethyl)-
solution to , sodium salt
measure flow in (1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-17-0440A............... 2 1/4/2018 Johnson Matthey Inc. (S) Tracer (S) Benzoic acid, 4-
chemical: Used as fluoro-2-
a tracer in water (trifluoromethyl)-
solution to , sodium salt
measure flow in (1:1).
deep oil or gas
bearing strata;
when in a solid
blend with polymer
to measure flow in
deep oil or gas
bearing strata; or
in a solid
proppant bead form
used to measure
flow in deep oil
or gas bearing
strata.
P-18-0020A............... 2 1/23/2018 Myriant Corporation. (G) Industrial (S) Butanediolic
coating. acid, polyol with
2-ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
2,5-Furandione and
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1H-inden-
5(or 6)-yl ester.
P-18-0036A............... 3 1/24/2018 CBI................. (G) Water repellant (S) Siloxanes and
Silicones, di-Me,
3-[3-carboxy-2(or
3)-(octenyl)-1-
oxopropoxy]propyl
group-terminated.
P-18-0041A............... 2 1/3/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione,
polyol for further polymer with 2-
reaction. ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano- 1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate.
P-18-0041A............... 3 1/23/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione,
polyol for further polymer with 2-
reaction. ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano- 1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate.
P-18-0041A............... 4 1/29/2018 Myriant Corporation. (G) Intermediate (S) 2,5-Furandione,
polyol for further polymer with 2-
reaction. ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano- 1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate.
P-18-0042A............... 3 1/3/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione,
coating. polymer with 2-
ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate,
polymer with 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexa
ne, 2-hydroxyethyl
acrylate- and 2-
hydroxyethyl
methacrylate-
blocked.
P-18-0042A............... 4 1/23/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione,
coating. polymer with 2-
ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate,
polymer with 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexa
ne, 2-hydroxyethyl
acrylate- and 2-
hydroxyethyl
methacrylate-
blocked.
[[Page 24114]]
P-18-0042A............... 5 1/29/2018 Myriant Corporation. (G) Industrial (S) 2,5-Furandione,
coating. polymer with 2-
ethyl-2-
(hydroxymethyl)-
1,3-propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1H-inden-
5(or 6)-yl ester,
ester with 2,3-
dihydroxypropyl
neodecanoate,
polymer with 5-
isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexa
ne, 2-hydroxyethyl
acrylate- and 2-
hydroxyethyl
methacrylate-
blocked.
P-18-0058A............... 2 1/8/2018 CBI................. (S) Component of (S) Phosphonium,
electroconductive trihexyltetradecyl-
low-noise grease , salt with 1,1,1-
for long-term trifluoro-n-
lubrication of [(trifluoromethyl)
capped or sealed sulfonyl]methanesu
ball bearings. lfonamide (1:1).
P-18-0070................ 3 1/4/2018 Arrowstar, LLC...... (G) Chemical (G) Waste plastics,
intermediate for polyester,
polyurethane depolymd. with
industry. glycols, polymers
with dicarboxylic
acids.
P-18-0070A............... 5 1/16/2018 Arrowstar, LLC...... (G) Chemical (G) Waste plastics,
intermediate for polyester,
polyurethane depolymd. with
industry. glycols, polymers
with dicarboxylic
acids.
P-18-0082................ 2 1/12/2018 Cytec Industries Inc (S) Isolated (G) Aspartic acid,
intermediate used tallow modified
in the manufacture diester.
of a surface-
active agent.
P-18-0083................ 1 1/3/2018 CBI................. (G) Dispersant (S) 2-propenoic
additive. acid, telomers
with bu alc.-2-[(2-
propen-1-
yloxy)methyl]oxira
ne reaction
products, sodium
bisulfite and
sodium 2-hydroxy-3-
(2-propen-1-yloxy)-
1-propanesulfonate
(1:1), sodium
salts,
peroxydisulfuric
acid
([(ho)s(o)2]2o2)
sodium salt (1:2)-
initiated.
P-18-0083A............... 5 1/8/2018 CBI................. (G) Dispersant (S) 2-propenoic
additive. acid, telomers
with bu alc.-2-[(2-
propen-1-
yloxy)methyl]oxira
ne reaction
products, sodium
bisulfite and
sodium 2-hydroxy-3-
(2-propen-1-yloxy)-
1-propanesulfonate
(1:1), sodium
salts,
peroxydisulfuric
acid
([(ho)s(o)2]2o2)
sodium salt (1:2)-
initiated.
P-18-0085................ 1 1/8/2018 CBI................. (G) Industrial use (G) Fatty acids
in oilfied. reaction products
with
ethyleneamines and
dialkyl ester.
P-18-0086................ 1 1/10/2018 CBI................. (S) Intermediate (G) Propanenitrile,
for a polyurethane polyalkylpolyamine
catalyst. .
P-18-0087................ 1 1/11/2018 Genesee Polymers (S) UV curing (S) 1-propanethiol,
Corporation. agent, silicone 3,3'-(1,1,3,3-
rubber cross tetramethyl-1,3-
linker. disiloxanediyl)bis-
.
P-18-0087A............... 2 1/22/2018 Genesee Polymers (S) UV curing (S) 1-propanethiol,
Corporation. agent, silicone 3,3'-(1,1,3,3-
rubber cross tetramethyl-1,3-
linker. disiloxanediyl)bis-
.
P-18-0088................ 1 1/16/2018 CBI................. (G) Oil and gas (G) Di(substituted-
production. 1,3-
trialkylammonium)
dialkylammonium
salt.
P-18-0090................ 1 1/17/2018 Preschooltourinc.... (S) Water reducing (G) Alkenoic acid,
agent for use in alkyl-, polymer
concrete. with alkenoic
acid, ester with
.alpha.-alkyl-
.omega.-
hydroxypoly(oxy-
1,2-ethanediyl),
salt.
P-18-0091................ 1 1/17/2018 Resinate Materials (S) Intermediate (G) Vegetable oil,
Group, Inc. for use in the polymers with
manufacture of diethylene glycol-
polymers. and polyol- and
polyethylene
glycol-depolymd.
poly(ethylene
terephthalate)
waste plastics and
arylcarboxylic
acid anhydride.
P-18-0092................ 2 1/26/2018 Shell chemical lp-- (G) The TBPMI (S) Tri-butyl
martinez catalyst chemical is used methyl phosphonium
plant. as a catalyst, the iodide.
catalyst is
imported and used
in the manufacture
of monoethlyene
glycol (MEG).
P-18-0093................ 1 1/23/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxane,
1,3,5,7,9,11,13,15-
octakis
(polyfluoroalkyl)-
.
P-18-0093A............... 2 1/24/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxane,
1,3,5,7,9,11,13,15-
octakis
(polyfluoroalkyl)-
.
P-18-0094................ 1 1/23/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxanealkylsub
stituted,
3,5,7,9,11,13,15-
heptakis(polyfluor
oalkyl)-.
P-18-0094A............... 2 1/24/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxanealkylsub
stituted,
3,5,7,9,11,13,15-
heptakis(polyfluor
oalkyl)-.
P-18-0095................ 1 1/23/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxanealkanol,
3,5,7,9,11,13,15-
heptakis(polyfluor
oalkyl)-, acetate.
P-18-0095A............... 2 1/24/2018 CBI................. (G) Additive to (G)
plastics. Pentacyclo[9.5.1.1
3,9.15,15.17,13]oc
tasiloxanealkanol,
3,5,7,9,11,13,15-
heptakis(polyfluor
oalkyl)-, acetate.
P-18-0096................ 1 1/23/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted
coating resin. carbopolycycle,
polymer with
substituted
carbomonocycles
and
oxybis[alkanol].
P-18-0096A............... 2 1/24/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted
coating resin. carbopolycycle,
polymer with
substituted
carbomonocycles
and
oxybis[alkanol].
P-18-0096A............... 3 1/24/2018 Allnex USA Inc...... (G) UV cured (G) Halosubstituted
coating resin. carbopolycycle,
polymer with
substituted
carbomonocycles
and
oxybis[alkanol].
[[Page 24115]]
P-18-0097................ 1 1/24/2018 MANE USA............ (S) Maderal is a (S) 1,3-dioxane, 2-
fragrance that (3,3-dimethyl-1-
will be added to cyclohexen-1-yl)-
consumer care 2,5,5-trimethly-.
products, personal
care products,
fine fragrances.
P-18-0098................ 1 1/24/2018 Allnex USA Inc...... (S) Dispersing (G) Polyphosphoric
additive for acids, polymers
pigments. with
(alkoxyalkoxy)alka
nol and
substituted
heteromonocycle.
P-18-0099................ 1 1/25/2018 CBI................. (G) Photoinitiator. (S) Methanone,1,1'-
(diethylgermylene)
bis(1-(4-
methoxyphyenyl).
P-18-0100................ 1 1/26/2018 Allnex USA Inc...... (G) UV curable (G) Substituted
coating resin. alkanoic acid
polymer with
alkylcarbonate,
alkanediols and
isocyanate
substituted
carbomonocycles,
sodium salt,
alkanoic acid-
substituted polyol
reaction products-
blocked.
P-18-0101................ 3 1/30/2018 CBI................. (G) Industrial..... (G)
Pentaerythritol,
mixed esters with
linear and
branched fatty
acids.
P-18-0102................ 1 1/26/2018 Allnex USA Inc...... (G) UV curable (G) Alkanoic acid,
coating Resin. ester with
[oxybis(alkylene)]
bis[alkyl-
substituted
alkanediol],
polymer with
alkylcarbonate,
alkanediols,
substituted
alkanoic acid and
isocyanate and
alkyl substituted
carbomonocycle,
sodium salt.
J-18-0001A............... 2 1/3/2018 Zea 2, LLC.......... (S) For the (G) modified
production of L- Corynebacterium
alanine. glutamicum.
----------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not subject to a CBI claim) on
the TMEs received by EPA during this period: The EPA case number
assigned to the TME, the submission document type (initial or amended),
the version number, the date the TME was received by EPA, the
submitting manufacturer (i.e., domestic producer or importer), the
potential uses identified by the manufacturer in the TME, and the
chemical substance identity.
Table II--TMEs and Biotech Exemptions Received From 1/2/2018 to 1/31/2018
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
T-18-0002............... 2 1/30/2018 CBI................ (G) Industrial use. (G)
Pentaerythritol,
mixed esters with
linear and
branched fatty
acids.
----------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the submission document type (initial or amended), the date the
NOC was received by EPA, the date of commencement provided by the
submitter in the NOC, a notation of the type of amendment (e.g.,
amendment to generic name, specific name, technical contact
information, etc.) and chemical substance identity.
Table III--NOCs Received From 1/2/2018 to 1/31/2018
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
P-10-0203............... 1/1/2018 7/1/2010 ........................... (G) Hexanedioic acid,
polymer with
alkanediol, dimethyl
carbonate, alkanediol,
hydroxy-(hydroxyalkyl)-
alkylpropanoic acid,
1,1'-methylenebis[4-
isocyanatocyclohexane]
, substituted alkyl
diamine and lactone,
compd. with alkyl
amine.
P-12-0124A.............. 1/5/2018 12/22/2017 Specific Name.............. (G)
Cyclohexanedicarboxyli
c acid, dialkyl ester.
P-13-0193............... 1/4/2018 4/16/2014 ........................... (G) Poly[oxy(methyl-1,2-
ethanediyl)], .alpha.-
hydro-.omega.-
[[[dialkyl-
(morpholinyl)alkyliden
e]amino]alkylethoxy]-,
ether with alkyl-
(hydroxyalkyl)-
alkanediol.
P-15-0738............... 1/19/2018 12/30/2017 ........................... (S) Siloxanes and
Silicones, di-Me, 3-(2-
hydroxyphenyl)propyl
group-terminated,
polymers with 1,4-
benzenedicarbonyl
dichloride, bisphenol
A and carbonic
dichloride, 4-(1,1-
dimethylethyl)phenyl
esters.
P-16-0233............... 1/23/2018 1/17/2018 ........................... (G) Benzoic acid, alkyl-
2-hydroxyl-, branched
and linear, monosodium
salts Benzoic acid, 2-
hydroxyalkyl-,
branched and linear,
monosodium salts.
P-16-0376A.............. 1/19/2018 12/6/2017 Generic Name............... (G) Substituted alkyl
reaction products with
modified 1-(1,1-
dimethylethoxy)-4-
ethenylbenzene-styrene
polymer.
P-17-0175A.............. 1/8/2018 11/21/2017 Generic Name............... (G) Fluorinated acrylic
copolymer.
[[Page 24116]]
P-17-0190............... 1/24/2018 1/3/2018 ........................... (G) Butanoic acid, 3-
oxo-, 2-[(2-methyl-1-
oxo-2-propen-1-
yl)oxy]ethyl ester,
polymer with
cycloalkyl 2-methyl-2-
propenoate,
ethenylbenzene, 2-
ethylhexyl 2-
propenoate, methyl 2-
methyl-2-propenoate
and 2-methylpropyl 2-
methyl-2-propenoate.
P-17-0237............... 1/25/2018 1/10/2018 ........................... (S) 1,6,10-
Dodecatriene, 7,11-
dimethyl-3-methylene-,
(6E)-, homopolymer,
hydrogenated, 2-
hydroxyethyl-
terminated.
P-17-0326............... 1/19/2018 1/16/2018 ........................... (G)
Allyloxymethylacrylate
.
P-18-0026............... 1/8/2018 1/8/2018 ........................... (S) Silsesquioxanes,
2,4,4-trimethylpentyl,
hydroxy-terminated.
P-18-0032............... 1/12/2018 12/14/2017 ........................... (G) Alkyl alkenoic
acid, alkyl ester,
polymer with alkyl
alkenoate, dialkyl
alkanediol,
substituted
carbomonocycle,
disubstituted
heteromonocycle,
disubstituted
heteropolycyclic,
alkanediol,
substituted alkyl
alkyl alkenoate and
substituted
heteromonocycle,
dialkyl peroxide
initiated.
----------------------------------------------------------------------------------------------------------------
In Table IV of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information received by EPA during this time period: The EPA case
number assigned to the test information; the date the test information
was received by EPA, the type of test information submitted, and
chemical substance identity.
Table IV--Test Information Received From 1/1/2018 to 1/31/2018
------------------------------------------------------------------------
Type of test Chemical
Case No. Received date information substance
------------------------------------------------------------------------
J-18-0001............ 1/25/2018 Document (G) Modified
describing Corynebacteriu
experiments m glutamicum.
validating cell
inactivation
methods.
Includes
narrative, data.
P-14-0321............ 1/19/2018 2-week Whole- (S) 2-Chloro-
Body Inhalation 1,1,1,2-
toxicity study Tetrafluoropro
(OECD 412). pane(244bb).
P-16-0206............ 1/19/2018 Water Solubility (G)
(OECD 105). Formaldehyde
ketone
condensate
polymer.
P-16-0543............ 1/25/2018 Air Quality (G)
monthly Halogenophosph
monitoring oric acid
report. metal salt.
P-17-0005............ 1/4/2018 (1) Test Plan (S) 1-
for Inhalation Tetradecene
Test (OECD 412). homopolymer
hydrogenated.
P-17-0302............ 1/25/2018 (1) Read Across (G) Neopentyl
Justification. Glycol Ester
(2) Mouse of Mixed
Lymphoma Assay Linear and
(OECD 476).. Branched
Carboxylic
Acids.
(3) Chromosome
Aberration
Assay (OECD
473).
(4) Pre-Natal
Developmental
Assay (OECD
414).
(1) 90 Day
Repeated Dose
Assay (OECD
408).
P-17-0364............ 1/15/2018 (1) Particle (G) Dicyloalkyl-
Size alkane-di-
Distribution isocyanate
Surface Tension homopolymer,
Study. alkyl alcohol
and polyalkyl
glycol mono-
alkyl-ether-
blocked.
P-17-0382............ 1/19/2018 (1) Fish (S) Amides,
Juvenile Growth tallow, N,N-
(OECD 215). bis(2-
(1) Daphia hydroxypropyl)
Reproduction .
Test (OECD
211)..
P-18-0007............ 1/22/2018 Local Lymph Node (S) Glycerides,
Assay (OECD soya mono- and
429). di-,
epoxidized,
acetates.
P-18-0076............ 1/5/2018 (1) Test study (G) 1,3,5-
in Male and Triazine-2,4-
Female Wistar Diamine
Rats Oral Derivative.
Administration
(Gavage).
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described above to access additional non-CBI
information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: May 4, 2018.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2018-11194 Filed 5-23-18; 8:45 am]
BILLING CODE 6560-50-P
