Accreditation and Approval of Intertek USA, Inc. (Signal Hill, CA) as a Commercial Gauger and Laboratory, 15591-15592 [2018-07432]
Download as PDF
<![CDATA[
15591
Federal Register / Vol. 83, No. 70 / Wednesday, April 11, 2018 / Notices
FOR FURTHER INFORMATION CONTACT:
Christopher J. Mocella, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1500N,
Washington, DC 20229, tel. 202–344–
1060.
Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 1000 Port Carteret Dr., Building C,
Carteret, NJ 07008 has been approved to
gauge petroleum and certain petroleum
products and accredited to test
SUPPLEMENTARY INFORMATION:
CBPL No.
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Intertek
USA, Inc., is approved for the following
gauging procedures for petroleum and
certain petroleum products from the
American Petroleum Institute (API):
API
chapters
1 ...................
3 ...................
7 ...................
Title
Vocabulary.
Tank Gauging.
Temperature Determination.
API
chapters
8 ...................
12 .................
17 .................
Title
Sampling.
Calculations.
Maritime Measurement.
Intertek USA, Inc., is accredited for
the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
ASTM
Title
................
................
................
................
................
................
................
D287
D95
D473
D4807
D86
D445
D4294
27–46 ................
27–48 ................
27–50 ................
27–53 ................
27–58 ................
Pending .............
Pending .............
Pending .............
Pending .............
D5002
D4052
D93
D2709
D5191
D1319
D2699
D2700
D3606
Pending .............
D5599
Pending .............
D5769
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Sediment in Crude Oil by Membrane Filtration.
Standard Test Method for Distillation of Petroleum Products.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
Spectrometry.
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method).
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption.
Octane Number of Spark-Ignition Engine Fuel.
Motor Octane Number of Spark-Ignition Engine Fuel.
Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas
Chromatography.
Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective
Flame Ionization Detection.
Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass
Spectrometry.
amozie on DSK30RV082PROD with NOTICES
27–01
27–04
27–06
27–07
27–08
27–11
27–13
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
Dated: April 4, 2018.
James D. Sweet,
Acting Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2018–07431 Filed 4–10–18; 8:45 am]
BILLING CODE 9111–14–P
VerDate Sep<11>2014
17:17 Apr 10, 2018
Jkt 244001
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc. (Signal Hill, CA) as a
Commercial Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Intertek USA, Inc. (Signal
Hill, CA), as a commercial gauger and
laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc. (Signal Hill, CA), has
been approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next three years as of
June 6, 2017.
DATES: Intertek USA, Inc. (Signal Hill,
CA) was approved and accredited as a
commercial gauger and laboratory as of
June 6, 2017. The next triennial
SUMMARY:
PO 00000
Frm 00042
Fmt 4703
Sfmt 4703
inspection date will be scheduled for
June 2020.
FOR FURTHER INFORMATION CONTACT:
Christopher J. Mocella, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1500N,
Washington, DC 20229, tel. 202–344–
1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 1941 Freeman Ave., Suite A, Signal
Hill, CA 90755, has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13. Intertek
USA, Inc., is approved for the following
gauging procedures for petroleum and
certain petroleum products from the
American Petroleum Institute (API):
API
chapters
3 ...................
E:\FR\FM\11APN1.SGM
11APN1
Title
Tank gauging.
15592
Federal Register / Vol. 83, No. 70 / Wednesday, April 11, 2018 / Notices
API
chapters
7 ...................
8 ...................
12 .................
API
chapters
Title
Temperature determination.
Sampling.
Calculations.
CBPL No.
17 .................
Title
Maritime measurement.
Intertek USA, Inc., is accredited for
the following laboratory analysis
procedures and methods for petroleum
and certain petroleum products set forth
by the U.S. Customs and Border
Protection Laboratory Methods (CBPL)
and American Society for Testing and
Materials (ASTM):
ASTM
Title
................
................
................
................
................
................
D4006
D95
D4928
D473
D445
D4294
27–46 ................
27–48 ................
D5002
D4052
Standard Test Method for Water in Crude Oil by Distillation.
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids.
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
Spectrometry.
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
27–03
27–04
27–05
27–06
27–11
27–13
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
Dated: April 4, 2018.
James D. Sweet,
Acting Executive Director, Laboratories and
Scientific Services Directorate.
[FR Doc. 2018–07432 Filed 4–10–18; 8:45 am]
DEPARTMENT OF HOUSING AND
URBAN DEVELOPMENT
[Docket No. FR–6001–N–14]
60-Day Notice of Proposed Information
Collection: HUD Multifamily Energy
Assessment
Office of the Assistant
Secretary for Housing—Federal Housing
Commissioner, HUD.
ACTION: Notice.
amozie on DSK30RV082PROD with NOTICES
AGENCY:
HUD is seeking approval from
the Office of Management and Budget
(OMB) for the information collection
described below. In accordance with the
Paperwork Reduction Act, HUD is
requesting comment from all interested
SUMMARY:
17:17 Apr 10, 2018
DATES:
Comments Due Date: June 11,
2018.
Interested persons are
invited to submit comments regarding
this proposal. Comments should refer to
the proposal by name and/or OMB
Control Number and should be sent to:
Colette Pollard, Reports Management
Officer, QDAM, Department of Housing
and Urban Development, 451 7th Street
SW, Room 4176, Washington, DC
20410–5000; telephone 202–402–3400
(this is not a toll-free number) or email
at Colette.Pollard@hud.gov for a copy of
the proposed forms or other available
information. Persons with hearing or
speech impairments may access this
number through TTY by calling the tollfree Federal Relay Service at (800) 877–
8339.
ADDRESSES:
FOR FURTHER INFORMATION CONTACT:
BILLING CODE 9111–14–P
VerDate Sep<11>2014
parties on the proposed collection of
information. The purpose of this notice
is to allow for 60 days of public
comment.
Jkt 244001
Harry Messner, Office of Asset
Management and Portfolio Oversight,
Department of Housing, Department of
Housing and Urban Development, 451
7th Street SW, Washington, DC 20410;
email Harry Messner at Harry.Messner@
hud.gov or telephone 202–402–2626.
This is not a toll-free number. Persons
with hearing or speech impairments
may access this number through TTY by
calling the toll-free Federal Relay
Service at (800) 877–8339.
Copies of available documents
submitted to OMB may be obtained
from Mr. Messner.
This
notice informs the public that HUD is
seeking approval from OMB for the
information collection described in
Section A.
SUPPLEMENTARY INFORMATION:
PO 00000
Frm 00043
Fmt 4703
Sfmt 4703
A. Overview of Information Collection
Title of Information Collection: HUD
Multifamily Energy Assessment.
OMB Approval Number: 2502–0568.
Type of Request: Extension of a
currently approved collection.
Form Number: HUD–9614 and
Certification of Compliance.
Description of the Need for the
Information and Proposed Use: The
purpose of this information collection is
to assist owners of multifamily housing
projects with assessing energy needs in
an effort to reduce energy costs and
improve energy conservation.
Respondents: Business and Other for
profit.
Estimated Number of Respondents:
19,079.
Estimated Number of Responses:
19,079.
Frequency of Response: 1.
Average Hours per Response: 8 hours.
Total Estimated Burdens: 99,861.
B. Solicitation of Public Comment
This notice is soliciting comments
from members of the public and affected
parties concerning the collection of
information described in Section A on
the following:
(1) Whether the proposed collection
of information is necessary for the
proper performance of the functions of
the agency, including whether the
information will have practical utility;
(2) The accuracy of the agency’s
estimate of the burden of the proposed
collection of information;
(3) Ways to enhance the quality,
utility, and clarity of the information to
be collected; and
(4) Ways to minimize the burden of
the collection of information on those
who are to respond; including through
the use of appropriate automated
collection techniques or other forms of
information technology, e.g., permitting
electronic submission of responses.
E:\FR\FM\11APN1.SGM
11APN1
]]>Agencies
[Federal Register Volume 83, Number 70 (Wednesday, April 11, 2018)]
[Notices]
[Pages 15591-15592]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-07432]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc. (Signal Hill,
CA) as a Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Intertek USA, Inc.
(Signal Hill, CA), as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc. (Signal Hill, CA), has been approved to gauge
petroleum and certain petroleum products and accredited to test
petroleum and certain petroleum products for customs purposes for the
next three years as of June 6, 2017.
DATES: Intertek USA, Inc. (Signal Hill, CA) was approved and accredited
as a commercial gauger and laboratory as of June 6, 2017. The next
triennial inspection date will be scheduled for June 2020.
FOR FURTHER INFORMATION CONTACT: Christopher J. Mocella, Laboratories
and Scientific Services Directorate, U.S. Customs and Border
Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, Washington, DC
20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 1941 Freeman Ave.,
Suite A, Signal Hill, CA 90755, has been approved to gauge petroleum
and certain petroleum products and accredited to test petroleum and
certain petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13. Intertek USA, Inc., is
approved for the following gauging procedures for petroleum and certain
petroleum products from the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................ Tank gauging.
[[Page 15592]]
7................................ Temperature determination.
8................................ Sampling.
12............................... Calculations.
17............................... Maritime measurement.
------------------------------------------------------------------------
Intertek USA, Inc., is accredited for the following laboratory
analysis procedures and methods for petroleum and certain petroleum
products set forth by the U.S. Customs and Border Protection Laboratory
Methods (CBPL) and American Society for Testing and Materials (ASTM):
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-03...................... D4006 Standard Test Method for
Water in Crude Oil by
Distillation.
27-04...................... D95 Standard Test Method for
Water in Petroleum
Products and Bituminous
Materials by
Distillation.
27-05...................... D4928 Standard Test Method for
Water in Crude Oils by
Coulometric Karl Fischer
Titration.
27-06...................... D473 Standard Test Method for
Sediment in Crude Oils
and Fuel Oils by the
Extraction Method.
27-11...................... D445 Standard Test Method for
Kinematic Viscosity of
Transparent and Opaque
Liquids.
27-13...................... D4294 Standard Test Method for
Sulfur in Petroleum and
Petroleum Products by
Energy-Dispersive X-ray
Fluorescence
Spectrometry.
27-46...................... D5002 Standard Test Method for
Density and Relative
Density of Crude Oils by
Digital Density Analyzer.
27-48...................... D4052 Standard Test Method for
Density and Relative
Density of Liquids by
Digital Density Meter.
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to [email protected].
Please reference the website listed below for a complete listing of CBP
approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
Dated: April 4, 2018.
James D. Sweet,
Acting Executive Director, Laboratories and Scientific Services
Directorate.
[FR Doc. 2018-07432 Filed 4-10-18; 8:45 am]
BILLING CODE 9111-14-P
