Information Collection; Material and Workmanship, 11201-11202 [2018-05065]

Download as PDF daltland on DSKBBV9HB2PROD with NOTICES Federal Register / Vol. 83, No. 50 / Wednesday, March 14, 2018 / Notices deposit accounts. Generally, the Regulation E disclosures are designed to ensure consumers receive adequate disclosure of basic terms, costs, and rights relating to electronic fund transfer (EFT) services provided to them so that they can make informed decisions. Institutions offering EFT services must disclose to consumers certain information, including: Initial and updated EFT terms, transaction information, the consumer’s potential liability for unauthorized transfers, and error resolution rights and procedures. Like Regulation E, Regulation CC has consumer protection disclosure requirements. Specifically, Regulation CC requires depository institutions to make funds deposited in transaction accounts available within specified time periods, disclose their availability policies to customers, and begin accruing interest on such deposits promptly. The disclosures are intended to alert customers that their ability to use deposited funds may be delayed, prevent unintentional (and costly) overdrafts, and allow customers to compare the policies of different institutions before deciding at which institution to deposit funds. Depository institutions must also provide an awareness disclosure regarding substitute checks. The regulation also requires notice to the depositary bank and to a customer of nonpayment of a check. Regulation DD also has similar consumer protection disclosure requirements that are intended to assist consumers in comparing deposit accounts offered by institutions, principally through the disclosure of fees, the annual percentage yield, and other account terms. Regulation DD requires depository institutions to disclose yields, fees, and other terms concerning deposit accounts to consumers at account opening, upon request, and when changes in terms occur. Depository institutions that provide periodic statements are required to include information about fees imposed, interest earned, and the annual percentage yield (APY) earned during those statement periods. It also contains rules about advertising deposit accounts. There is no change in the method or substance of the collection. The overall reduction in burden hours is the result of economic fluctuation and the reduced number of FDIC-supervised institutions since the last submission in 2014. In particular, the number of respondents has decreased while the hours per response and frequency of responses have remained the same. VerDate Sep<11>2014 18:17 Mar 13, 2018 Jkt 244001 Request for Comment DEPARTMENT OF DEFENSE Comments are invited on: (a) Whether the collection of information is necessary for the proper performance of the FDIC’s functions, including whether the information has practical utility; (b) the accuracy of the estimates of the burden of the information collection, including the validity of the methodology and assumptions used; (c) ways to enhance the quality, utility, and clarity of the information to be collected; and (d) ways to minimize the burden of the collection of information on respondents, including through the use of automated collection techniques or other forms of information technology. All comments will become a matter of public record. GENERAL SERVICES ADMINISTRATION Dated at Washington, DC, on March 9, 2018. Federal Deposit Insurance Corporation. Robert E. Feldman, Executive Secretary. SUMMARY: 11201 [FR Doc. 2018–05112 Filed 3–13–18; 8:45 am] BILLING CODE 6714–01–P FEDERAL MARITIME COMMISSION Notice of Agreement Filed The Commission hereby gives notice of the filing of the following agreement under the Shipping Act of 1984. Interested parties may submit comments on the agreement to the Secretary, Federal Maritime Commission, Washington, DC 20573, within twelve days of the date this notice appears in the Federal Register. A copy of the agreement is available through the Commission’s website (www.fmc.gov) or by contacting the Office of Agreements at (202)-523–5793 or tradeanalysis@ fmc.gov. Agreement No.: 012456–001. Title: Turkon Lines—Nile Dutch Africa Space and Sailing Agreement. Parties: Nile Dutch Africa Line BV and Turkon Container Transportation & Shipping, Inc.. Filing Party: Eric Lee, Esq.; Holland & Knight LLP; 800 17th Street NW, Suite 1100, Washington, DC 20006. Synopsis: The amendment specifies a range of vessel sizes to be used under the Agreement. By Order of the Federal Maritime Commission. Dated: March 9, 2018. Rachel E. Dickon, Secretary. [FR Doc. 2018–05198 Filed 3–13–18; 8:45 am] BILLING CODE 6731–AA–P PO 00000 Frm 00034 Fmt 4703 Sfmt 4703 NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [OMB Control No. 9000–0062; Docket 2018– 0003; Sequence 5] Information Collection; Material and Workmanship Department of Defense (DOD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA). ACTION: Notice of request for public comments regarding an extension to an existing OMB clearance. AGENCY: Under the provisions of the Paperwork Reduction Act, the Regulatory Secretariat Division will be submitting to the Office of Management and Budget (OMB) a request to review and approve an extension of a previously approved information collection requirement concerning material and workmanship. DATES: Submit comments on or before May 14, 2018. ADDRESSES: Submit comments identified by Information Collection 9000–0062, Material and Workmanship, by any of the following methods: • Regulations.gov: https:// www.regulations.gov. Submit comments via the Federal eRulemaking portal by searching the OMB Control number 9000–0062. Select the link ‘‘Comment Now’’ that corresponds with ‘‘Information Collection 9000–0062, Material and Workmanship’’. Follow the instructions provided on the screen. Please include your name, company name (if any), and ‘‘Information Collection 9000–0062, Material and Workmanship’’ on your attached document. • Mail: General Services Administration, Regulatory Secretariat Division (MVCB), 1800 F Street NW, Washington, DC 20405. ATTN: Ms. Mandell/IC 9000–0062, Material and Workmanship. Instructions: Please submit comments only and cite Information Collection 9000–0062, Material and Workmanship, in all correspondence related to this collection. Comments received generally will be posted without change to https:// www.regulations.gov, including any personal and/or business confidential information provided. To confirm receipt of your comment(s), please check www.regulations.gov, approximately two to three days after submission to verify posting (except E:\FR\FM\14MRN1.SGM 14MRN1 11202 Federal Register / Vol. 83, No. 50 / Wednesday, March 14, 2018 / Notices allow 30 days for posting of comments submitted by mail). FOR FURTHER INFORMATION CONTACT: Mr. Curtis E. Glover, Sr., Procurement Analyst, Federal Acquisition Policy Division, GSA, telephone 202–501– 1448, or via email at curtis.glover@ gsa.gov. SUPPLEMENTARY INFORMATION: A. Purpose Under Federal contracts requiring that equipment (e.g., pumps, fans, generators, chillers, etc.) be installed in a project, the Government must determine that the equipment meets the contract requirements. Therefore, the contractor must submit sufficient data on the particular equipment to allow the Government to analyze the item. The Government uses the submitted data to determine whether or not the equipment meets the contract requirements in the categories of performance, construction, and durability. This data is placed in the contract file and used during the inspection of the equipment when it arrives on the project and when it is made operable. B. Annual Reporting Burden The information collection requirement at FAR clause 52.236–5 has decreased based on information from the FY 2017 FPDS database which shows a lower number of estimated respondents that are subject to the clause. Respondents: 1,377. Responses per Respondent: 2.0. Annual Responses: 2,754. Hours per Response: .25. Total Burden Hours: 689. daltland on DSKBBV9HB2PROD with NOTICES C. Public Comments 18:17 Mar 13, 2018 Dated: March 7, 2018. Lorin S. Curit, Director, Federal Acquisition Policy Division, Office of Governmentwide Acquisition Policy, Office of Acquisition Policy, Office of Governmentwide Policy. [FR Doc. 2018–05065 Filed 3–13–18; 8:45 am] BILLING CODE 6820–EP–P DEPARTMENT OF DEFENSE GENERAL SERVICES ADMINISTRATION NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [OMB Control No. 9000–0163; Docket 2018– 0003; Sequence 3] Information Collection; Small Business Size Re-Representation Department of Defense (DOD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA). ACTION: Notice of request for public comments regarding an extension to an existing OMB clearance. AGENCIES: Under the provisions of the Paperwork Reduction Act, the Regulatory Secretariat Division will be submitting to the Office of Management and Budget (OMB) a request for approval of a previously approved information collection requirement regarding small business size rerepresentation. SUMMARY: Submit comments on or before: May 14, 2018. ADDRESSES: Submit comments identified by Information Collection 9000–0163, Small Business Size Rerepresentation, by any of the following methods: • Regulations.gov: https:// www.regulations.gov. Submit comments via the Federal eRulemaking portal by searching the OMB Control number 9000–0163. Select the link ‘‘Comment Now’’ that corresponds with ‘‘Information Collection 9000–0163, Small Business Size Re-representation’’. Follow the instructions provided on the screen. Please include your name, company name (if any), and ‘‘Information Collection 9000–0163, Small Business Size Re-representation’’ on your attached document. • Mail: General Services Administration, Regulatory Secretariat DATES: Public comments are particularly invited on: Whether this collection of information is necessary for the proper performance of functions of the FAR, and whether it will have practical utility; whether our estimate of the public burden of this collection of information is accurate, and based on valid assumptions and methodology; ways to enhance the quality, utility, and clarity of the information to be collected; and ways in which we can minimize the burden of the collection of information on those who are to respond, through the use of appropriate technological collection techniques or other forms of information technology. Obtaining Copies of Proposals: Requesters may obtain a copy of the information collection documents from the General Services Administration, Regulatory Secretariat Division (MVCB), VerDate Sep<11>2014 1800 F Street NW, Washington, DC 20405, telephone 202–501–4755. Please cite OMB Control No. 9000–0062, Material and Workmanship, in all correspondence. Jkt 244001 PO 00000 Frm 00035 Fmt 4703 Sfmt 4703 Division (MVCB), 1800 F Street NW, Washington, DC 20405. ATTN: Ms. Mandell/IC 9000–0163, Small Business Size Re-representation. Instructions: Please submit comments only and cite ‘‘Information Collection 9000–0163, Small Business Size Rerepresentation,’’ in all correspondence related to this collection. Comments received generally will be posted without change to https:// www.regulations.gov, including any personal and/or business confidential information provided. To confirm receipt of your comment(s), please check www.regulations.gov, approximately two-to-three days after submission to verify posting (except allow 30 days for posting of comments submitted by mail). FOR FURTHER INFORMATION CONTACT: Ms. Janet Fry, Procurement Analyst, Office of Government-wide Policy, contact via telephone 703–605–3167 or email janet.fry@gsa.gov. SUPPLEMENTARY INFORMATION: A. Purpose Federal Acquisition Regulation (FAR) 19.301 and the FAR clause at 52.219–28, Post-Award Small Business Program Rerepresentation, implement the Small Business Administration’s (SBA’s) regulation at 13 CFR 121.404(g), requiring that a concern that initially represented itself as small at the time of its initial offer must recertify its status as a small business under the following circumstances: • Within thirty days of an approved contract novation; • Within thirty days in the case of a merger or acquisition, where contract novation is not required; or • Within 120 days prior to the end of the fifth year of a contract, and no more than 120 days prior to the exercise of any option thereafter. The implementation of SBA’s regulation in FAR 19.301 and the FAR clause at 52.219–28 require that contractors re-represent size status by updating their representations at the prime contract level in the Representations and Certifications section of the System for Award Management (SAM) and notifying the contracting officer that it has made the required update. The purpose of implementing small business re-representations in the FAR is to ensure that small business size status is accurately represented and reported over the life of long-term contracts. The FAR also provides for provisions designed to ensure more accurate reporting of size status for contracts that are novated, or performed E:\FR\FM\14MRN1.SGM 14MRN1

Agencies

[Federal Register Volume 83, Number 50 (Wednesday, March 14, 2018)]
[Notices]
[Pages 11201-11202]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-05065]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF DEFENSE

GENERAL SERVICES ADMINISTRATION

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION

[OMB Control No. 9000-0062; Docket 2018-0003; Sequence 5]


Information Collection; Material and Workmanship

AGENCY: Department of Defense (DOD), General Services Administration 
(GSA), and National Aeronautics and Space Administration (NASA).

ACTION: Notice of request for public comments regarding an extension to 
an existing OMB clearance.

-----------------------------------------------------------------------

SUMMARY: Under the provisions of the Paperwork Reduction Act, the 
Regulatory Secretariat Division will be submitting to the Office of 
Management and Budget (OMB) a request to review and approve an 
extension of a previously approved information collection requirement 
concerning material and workmanship.

DATES: Submit comments on or before May 14, 2018.

ADDRESSES: Submit comments identified by Information Collection 9000-
0062, Material and Workmanship, by any of the following methods:
     Regulations.gov: https://www.regulations.gov. Submit 
comments via the Federal eRulemaking portal by searching the OMB 
Control number 9000-0062. Select the link ``Comment Now'' that 
corresponds with ``Information Collection 9000-0062, Material and 
Workmanship''. Follow the instructions provided on the screen. Please 
include your name, company name (if any), and ``Information Collection 
9000-0062, Material and Workmanship'' on your attached document.
     Mail: General Services Administration, Regulatory 
Secretariat Division (MVCB), 1800 F Street NW, Washington, DC 20405. 
ATTN: Ms. Mandell/IC 9000-0062, Material and Workmanship.
    Instructions: Please submit comments only and cite Information 
Collection 9000-0062, Material and Workmanship, in all correspondence 
related to this collection. Comments received generally will be posted 
without change to https://www.regulations.gov, including any personal 
and/or business confidential information provided. To confirm receipt 
of your comment(s), please check www.regulations.gov, approximately two 
to three days after submission to verify posting (except

[[Page 11202]]

allow 30 days for posting of comments submitted by mail).

FOR FURTHER INFORMATION CONTACT: Mr. Curtis E. Glover, Sr., Procurement 
Analyst, Federal Acquisition Policy Division, GSA, telephone 202-501-
1448, or via email at [email protected].

SUPPLEMENTARY INFORMATION:

A. Purpose

    Under Federal contracts requiring that equipment (e.g., pumps, 
fans, generators, chillers, etc.) be installed in a project, the 
Government must determine that the equipment meets the contract 
requirements. Therefore, the contractor must submit sufficient data on 
the particular equipment to allow the Government to analyze the item.
    The Government uses the submitted data to determine whether or not 
the equipment meets the contract requirements in the categories of 
performance, construction, and durability. This data is placed in the 
contract file and used during the inspection of the equipment when it 
arrives on the project and when it is made operable.

B. Annual Reporting Burden

    The information collection requirement at FAR clause 52.236-5 has 
decreased based on information from the FY 2017 FPDS database which 
shows a lower number of estimated respondents that are subject to the 
clause.
    Respondents: 1,377.
    Responses per Respondent: 2.0.
    Annual Responses: 2,754.
    Hours per Response: .25.
    Total Burden Hours: 689.

C. Public Comments

    Public comments are particularly invited on: Whether this 
collection of information is necessary for the proper performance of 
functions of the FAR, and whether it will have practical utility; 
whether our estimate of the public burden of this collection of 
information is accurate, and based on valid assumptions and 
methodology; ways to enhance the quality, utility, and clarity of the 
information to be collected; and ways in which we can minimize the 
burden of the collection of information on those who are to respond, 
through the use of appropriate technological collection techniques or 
other forms of information technology.
    Obtaining Copies of Proposals: Requesters may obtain a copy of the 
information collection documents from the General Services 
Administration, Regulatory Secretariat Division (MVCB), 1800 F Street 
NW, Washington, DC 20405, telephone 202-501-4755. Please cite OMB 
Control No. 9000-0062, Material and Workmanship, in all correspondence.

    Dated: March 7, 2018.
Lorin S. Curit,
Director, Federal Acquisition Policy Division, Office of Governmentwide 
Acquisition Policy, Office of Acquisition Policy, Office of 
Governmentwide Policy.
[FR Doc. 2018-05065 Filed 3-13-18; 8:45 am]
 BILLING CODE 6820-EP-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.