Foreign-Trade Zone 138-Franklin County, Ohio; Application for Subzone; International Converter, Inc., Caldwell, Ohio, 10839 [2018-05024]

Download as PDF Federal Register / Vol. 83, No. 49 / Tuesday, March 13, 2018 / Notices A copy of the application will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Elizabeth Whiteman at Elizabeth.Whiteman@trade.gov or (202) 482–0473. Dated: March 6, 2018. Andrew McGilvray, Executive Secretary. Dated: March 7, 2018. Andrew McGilvray, Executive Secretary. [FR Doc. 2018–05025 Filed 3–12–18; 8:45 am] [FR Doc. 2018–05024 Filed 3–12–18; 8:45 am] BILLING CODE 3510–DS–P BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE DEPARTMENT OF COMMERCE Foreign-Trade Zones Board International Trade Administration [S–45–2018] [A–475–828] Foreign-Trade Zone 138—Franklin County, Ohio; Application for Subzone; International Converter, Inc., Caldwell, Ohio amozie on DSK30RV082PROD with NOTICES A copy of the notification will be available for public inspection at the Office of the Executive Secretary, Foreign-Trade Zones Board, Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230–0002, and in the ‘‘Reading Room’’ section of the Board’s website, which is accessible via www.trade.gov/ftz. For further information, contact Christopher Wedderburn at Chris.Wedderburn@trade.gov or (202) 482–1963. Stainless Steel Butt-Weld Pipe Fittings From Italy: Preliminary Results of Antidumping Duty Administrative Review; 2016–2017 An application has been submitted to the Foreign-Trade Zones Board (the Board) by the Columbus Regional Airport Authority, grantee of FTZ 138, requesting subzone status for the facility of International Converter, Inc. (IC), located in Caldwell, Ohio. The application was submitted pursuant to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C. 81a– 81u), and the regulations of the Board (15 CFR part 400). It was formally docketed on March 7, 2018. The proposed subzone (10.29 acres) is located at 17153 Industrial Highway, Caldwell, Noble County. A notification of proposed production activity has been submitted and is being processed under 15 CFR 400.37 (Doc. B–13–2018). The proposed subzone would be subject to the existing activation limit of FTZ 138. In accordance with the Board’s regulations, Elizabeth Whiteman of the FTZ Staff is designated examiner to review the application and make recommendations to the Executive Secretary. Public comment is invited from interested parties. Submissions shall be addressed to the Board’s Executive Secretary at the address below. The closing period for their receipt is April 23, 2018. Rebuttal comments in response to material submitted during the foregoing period may be submitted during the subsequent 15-day period to May 7, 2018. VerDate Sep<11>2014 17:47 Mar 12, 2018 Jkt 244001 Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The Department of Commerce (Commerce) preliminarily determines that sales of subject merchandise by Filmag Italia Spa (Filmag) were not made at less than normal value during the period of review (POR) February 1, 2016, through January 31, 2017. Interested parties are invited to comment on these preliminary results. DATES: Applicable March 13, 2018. FOR FURTHER INFORMATION CONTACT: John Drury or Kent Boydston, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0195 or (202) 482–5649, respectively. AGENCY: SUPPLEMENTARY INFORMATION: Background On April 10, 2017, Commerce published in the Federal Register the notice of initiation of an administrative review of the AD order on stainless steel butt-weld pipe fittings (SSBW pipe fittings) from Italy for the period February 1, 2016, through January 31, 2017.1 Commerce initiated a review 1 See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 82 FR 17188 (April 10, 2017). PO 00000 Frm 00017 Fmt 4703 Sfmt 4703 10839 with respect to one company, Filmag. On October 31, 2017, Commerce extended the preliminary results of review until January 2, 2018.2 On December 28, 2017, Commerce extended the preliminary results of review until February 28, 2018.3 Commerce exercised its discretion to toll all deadlines affected by the closure of the Federal Government from January 20 through 22, 2018. If the new deadline falls on a non-business day, in accordance with Commerce’s practice, the deadline will become the next business day. The revised deadline for the final results of this review is now March 5, 2018.4 Scope of the Order The merchandise covered by the order is certain stainless steel butt-weld pipe fittings from Italy.5 Stainless steel buttweld pipe fittings are under 14 inches in outside diameter (based on nominal pipe size), whether finished or unfinished. The product encompasses all grades of stainless steel and ‘‘commodity’’ and ‘‘specialty’’ fittings. Specifically excluded from the definition are threaded, grooved, and bolted fittings, and fittings made from any material other than stainless steel. The butt-weld fittings subject to the order are currently classifiable under subheading 7307.23.0000 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the scope of the order is dispositive. A full description of the scope of the order is contained in the memorandum from Christian Marsh, Deputy Assistant Secretary for 2 See Memorandum to James Maeder, Senior Director performing the duties of Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, from John K. Drury, International Trade Compliance Analyst, Office VI, ‘‘Stainless Steel Butt-Weld Pipe Fittings from Italy: Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review; 2016–2017,’’ dated October 31, 2017. 3 See Memorandum to Edward Yang, Senior Director, Office VII, from Kent Boydston, International Trade Compliance Analyst, Office VI, ‘‘Stainless Steel Butt-Weld Pipe Fittings from Italy: Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review; 2016– 2017,’’ dated December 28, 2017. 4 See Memorandum for The Record from Christian Marsh, Deputy Assistant Secretary for Enforcement and Compliance, performing the nonexclusive functions and duties of the Assistant Secretary for Enforcement and Compliance, ‘‘Deadlines Affected by the Shutdown of the Federal Government’’ (Tolling Memorandum), dated January 23, 2018. All deadlines in this segment of the proceeding have been extended by 3 days. 5 See Antidumping Duty Orders: Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines, 66 FR 11257 (February 23, 2001). E:\FR\FM\13MRN1.SGM 13MRN1

Agencies

[Federal Register Volume 83, Number 49 (Tuesday, March 13, 2018)]
[Notices]
[Page 10839]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-05024]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[S-45-2018]


Foreign-Trade Zone 138--Franklin County, Ohio; Application for 
Subzone; International Converter, Inc., Caldwell, Ohio

    An application has been submitted to the Foreign-Trade Zones Board 
(the Board) by the Columbus Regional Airport Authority, grantee of FTZ 
138, requesting subzone status for the facility of International 
Converter, Inc. (IC), located in Caldwell, Ohio. The application was 
submitted pursuant to the provisions of the Foreign-Trade Zones Act, as 
amended (19 U.S.C. 81a-81u), and the regulations of the Board (15 CFR 
part 400). It was formally docketed on March 7, 2018.
    The proposed subzone (10.29 acres) is located at 17153 Industrial 
Highway, Caldwell, Noble County. A notification of proposed production 
activity has been submitted and is being processed under 15 CFR 400.37 
(Doc. B-13-2018). The proposed subzone would be subject to the existing 
activation limit of FTZ 138.
    In accordance with the Board's regulations, Elizabeth Whiteman of 
the FTZ Staff is designated examiner to review the application and make 
recommendations to the Executive Secretary.
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary at the address 
below. The closing period for their receipt is April 23, 2018. Rebuttal 
comments in response to material submitted during the foregoing period 
may be submitted during the subsequent 15-day period to May 7, 2018.
    A copy of the application will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW, 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
Board's website, which is accessible via www.trade.gov/ftz.
    For further information, contact Elizabeth Whiteman at 
[email protected] or (202) 482-0473.

    Dated: March 7, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018-05024 Filed 3-12-18; 8:45 am]
 BILLING CODE 3510-DS-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.