Accreditation and Approval of AmSpec LLC (Cape Canaveral, FL) as a Commercial Gauger and Laboratory, 10503-10504 [2018-04758]

Download as PDF 10503 Federal Register / Vol. 83, No. 47 / Friday, March 9, 2018 / Notices CBPL No. ASTM 27–03 27–04 27–05 27–06 27–08 27–11 27–13 ................ ................ ................ ................ ................ ................ ................ D4006 D95 D4928 D473 D86 D445 D4294 27–46 27–48 27–50 27–54 27–58 ................ ................ ................ ................ ................ D5002 D4052 D93 D1796 D5191 Title Standard Test Method for Water in Crude Oil by Distillation. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration. Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. Standard Test Method for Distillation of Petroleum Products. Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry. Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer. Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester. Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method. Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method). Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. Dated: March 5, 2018. James D. Sweet, Acting Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2018–04760 Filed 3–8–18; 8:45 am] BILLING CODE 9111–14–P CBPL No. amozie on DSK30RV082PROD with NOTICES Washington, DC 20229, tel. 202–344– 1060. U.S. Customs and Border Protection SUPPLEMENTARY INFORMATION: Accreditation and Approval of AmSpec LLC (Cape Canaveral, FL) as a Commercial Gauger and Laboratory U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of accreditation and approval of AmSpec LLC (Cape Canaveral, FL), as a commercial gauger and laboratory. AGENCY: Notice is hereby given, pursuant to CBP regulations, that AmSpec LLC (Cape Canaveral, FL), has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of September 28, 2017. DATES: AmSpec LLC (Cape Canaveral, FL) was approved and accredited as a commercial gauger and laboratory as of September 28, 2017. The next triennial inspection date will be scheduled for September 2020. FOR FURTHER INFORMATION CONTACT: Christopher J. Mocella, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, SUMMARY: ASTM 27–01 .............. 27–02 .............. D287 D1298 27–03 27–04 27–06 27–08 27–11 27–13 .............. .............. .............. .............. .............. .............. D4006 D95 D473 D86 D445 D4294 27–48 27–50 27–53 27–54 .............. .............. .............. .............. D4052 D93 D2709 D1796 VerDate Sep<11>2014 DEPARTMENT OF HOMELAND SECURITY 16:47 Mar 08, 2018 Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that AmSpec LLC, 191 Center St., Suite 102, Cape Canaveral, FL 32920, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. AmSpec LLC (Cape Canaveral, FL) is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API): API chapters 3 ................... 7 ................... 8 ................... 11 ................. 12 ................. 17 ................. Title Tank Gauging. Temperature Determination. Sampling. Physical Properties. Calculations. Maritime Measurement. AmSpec LLC (Cape Canaveral, FL) is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM): Title Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. Standard Test Method for Water in Crude Oil by Distillation. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. Standard Test Method for Distillation of Petroleum Products. Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry. Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester. Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge. Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method. Jkt 244001 PO 00000 Frm 00081 Fmt 4703 Sfmt 4703 E:\FR\FM\09MRN1.SGM 09MRN1 10504 Federal Register / Vol. 83, No. 47 / Friday, March 9, 2018 / Notices CBPL No. ASTM 27–58 .............. D5191 Title Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method). Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. Dated: March 5, 2018. James D. Sweet, Acting Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2018–04758 Filed 3–8–18; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Approval of SGS North America, Inc., as a Commercial Gauger U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of approval of SGS North America, Inc., as a commercial gauger. AGENCY: Notice is hereby given, pursuant to CBP regulations, that SGS North America, Inc., has been approved to gauge petroleum and certain petroleum products for customs purposes for the next three years as of May 24, 2017. DATES: The approval of SGS North America, Inc., as commercial gauger became effective on May 24, 2017. The next triennial inspection date will be scheduled for May 2020. FOR FURTHER INFORMATION CONTACT: Mr. Stephen Cassata, Laboratories and Scientific Services, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, Washington, DC 20229, tel. 202–344–1060. SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 151.13, amozie on DSK30RV082PROD with NOTICES SUMMARY: VerDate Sep<11>2014 16:47 Mar 08, 2018 Jkt 244001 that SGS North America, Inc., 6624 Langley Dr., Baton Rouge, LA 70809, has been approved to gauge petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.13. SGS North America, Inc., is approved for the following gauging procedures for petroleum and certain petroleum products set forth by the American Petroleum Institute (API): API chapters Title 3 ....................... 7 ....................... 8 ....................... 12 ..................... 17 ..................... Tank gauging. Temperature Determination. Sampling. Calculations. Maritime Measurements. Anyone wishing to employ this entity to conduct gauger services should request and receive written assurances from the entity that it is approved by the U.S. Customs and Border Protection to conduct the specific gauger service requested. Alternatively, inquiries regarding the specific gauger service this entity is approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. https:// www.cbp.gov/about/labs-scientific/ commercial-gaugers-and-laboratories. Dated: February 28, 2018. James D. Sweet, Acting Executive Director, Laboratories and Scientific Services Directorate. [FR Doc. 2018–04762 Filed 3–8–18; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA–2018–0002; Internal Agency Docket No. FEMA–B–1806] Proposed Flood Hazard Determinations Federal Emergency Management Agency, DHS. ACTION: Notice. AGENCY: Comments are requested on proposed flood hazard determinations, which may include additions or SUMMARY: PO 00000 Frm 00082 Fmt 4703 Sfmt 4703 modifications of any Base Flood Elevation (BFE), base flood depth, Special Flood Hazard Area (SFHA) boundary or zone designation, or regulatory floodway on the Flood Insurance Rate Maps (FIRMs), and where applicable, in the supporting Flood Insurance Study (FIS) reports for the communities listed in the table below. The purpose of this notice is to seek general information and comment regarding the preliminary FIRM, and where applicable, the FIS report that the Federal Emergency Management Agency (FEMA) has provided to the affected communities. The FIRM and FIS report are the basis of the floodplain management measures that the community is required either to adopt or to show evidence of having in effect in order to qualify or remain qualified for participation in the National Flood Insurance Program (NFIP). In addition, the FIRM and FIS report, once effective, will be used by insurance agents and others to calculate appropriate flood insurance premium rates for new buildings and the contents of those buildings. DATES: Comments are to be submitted on or before June 7, 2018. ADDRESSES: The Preliminary FIRM, and where applicable, the FIS report for each community are available for inspection at both the online location https://www.fema.gov/ preliminaryfloodhazarddata and the respective Community Map Repository address listed in the tables below. Additionally, the current effective FIRM and FIS report for each community are accessible online through the FEMA Map Service Center at https:// msc.fema.gov for comparison. You may submit comments, identified by Docket No. FEMA–B–1806, to Rick Sacbibit, Chief, Engineering Services Branch, Federal Insurance and Mitigation Administration, FEMA, 400 C Street SW, Washington, DC 20472, (202) 646–7659, or (email) patrick.sacbibit@fema.dhs.gov. FOR FURTHER INFORMATION CONTACT: Rick Sacbibit, Chief, Engineering Services Branch, Federal Insurance and Mitigation Administration, FEMA, 400 C Street SW, Washington, DC 20472, (202) 646–7659, or (email) patrick.sacbibit@fema.dhs.gov; or visit the FEMA Map Information eXchange (FMIX) online at https:// www.floodmaps.fema.gov/fhm/fmx_ main.html. E:\FR\FM\09MRN1.SGM 09MRN1

Agencies

[Federal Register Volume 83, Number 47 (Friday, March 9, 2018)]
[Notices]
[Pages 10503-10504]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-04758]


-----------------------------------------------------------------------

DEPARTMENT OF HOMELAND SECURITY

U.S. Customs and Border Protection


Accreditation and Approval of AmSpec LLC (Cape Canaveral, FL) as 
a Commercial Gauger and Laboratory

AGENCY: U.S. Customs and Border Protection, Department of Homeland 
Security.

ACTION: Notice of accreditation and approval of AmSpec LLC (Cape 
Canaveral, FL), as a commercial gauger and laboratory.

-----------------------------------------------------------------------

SUMMARY: Notice is hereby given, pursuant to CBP regulations, that 
AmSpec LLC (Cape Canaveral, FL), has been approved to gauge petroleum 
and certain petroleum products and accredited to test petroleum and 
certain petroleum products for customs purposes for the next three 
years as of September 28, 2017.

DATES: AmSpec LLC (Cape Canaveral, FL) was approved and accredited as a 
commercial gauger and laboratory as of September 28, 2017. The next 
triennial inspection date will be scheduled for September 2020.

FOR FURTHER INFORMATION CONTACT: Christopher J. Mocella, Laboratories 
and Scientific Services Directorate, U.S. Customs and Border 
Protection, 1300 Pennsylvania Avenue NW, Suite 1500N, Washington, DC 
20229, tel. 202-344-1060.

SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 
151.12 and 19 CFR 151.13, that AmSpec LLC, 191 Center St., Suite 102, 
Cape Canaveral, FL 32920, has been approved to gauge petroleum and 
certain petroleum products and accredited to test petroleum and certain 
petroleum products for customs purposes, in accordance with the 
provisions of 19 CFR 151.12 and 19 CFR 151.13. AmSpec LLC (Cape 
Canaveral, FL) is approved for the following gauging procedures for 
petroleum and certain petroleum products from the American Petroleum 
Institute (API):

------------------------------------------------------------------------
            API chapters                             Title
------------------------------------------------------------------------
3...................................  Tank Gauging.
7...................................  Temperature Determination.
8...................................  Sampling.
11..................................  Physical Properties.
12..................................  Calculations.
17..................................  Maritime Measurement.
------------------------------------------------------------------------

    AmSpec LLC (Cape Canaveral, FL) is accredited for the following 
laboratory analysis procedures and methods for petroleum and certain 
petroleum products set forth by the U.S. Customs and Border Protection 
Laboratory Methods (CBPL) and American Society for Testing and 
Materials (ASTM):

------------------------------------------------------------------------
      CBPL No.               ASTM                      Title
------------------------------------------------------------------------
27-01..............  D287                 Standard Test Method for API
                                           Gravity of Crude Petroleum
                                           and Petroleum Products
                                           (Hydrometer Method).
27-02..............  D1298                Standard Test Method for
                                           Density, Relative Density
                                           (Specific Gravity), or API
                                           Gravity of Crude Petroleum
                                           and Liquid Petroleum Products
                                           by Hydrometer Method.
27-03..............  D4006                Standard Test Method for Water
                                           in Crude Oil by Distillation.
27-04..............  D95                  Standard Test Method for Water
                                           in Petroleum Products and
                                           Bituminous Materials by
                                           Distillation.
27-06..............  D473                 Standard Test Method for
                                           Sediment in Crude Oils and
                                           Fuel Oils by the Extraction
                                           Method.
27-08..............  D86                  Standard Test Method for
                                           Distillation of Petroleum
                                           Products.
27-11..............  D445                 Standard Test Method for
                                           Kinematic Viscosity of
                                           Transparent and Opaque
                                           Liquids.
27-13..............  D4294                Standard Test Method for
                                           Sulfur in Petroleum and
                                           Petroleum Products by Energy-
                                           Dispersive X-ray Fluorescence
                                           Spectrometry.
27-48..............  D4052                Standard Test Method for
                                           Density and Relative Density
                                           of Liquids by Digital Density
                                           Meter.
27-50..............  D93                  Standard Test Methods for
                                           Flash-Point by Pensky-Martens
                                           Closed Cup Tester.
27-53..............  D2709                Standard Test Method for Water
                                           and Sediment in Middle
                                           Distillate Fuels by
                                           Centrifuge.
27-54..............  D1796                Standard Test Method for Water
                                           and Sediment in Fuel Oils by
                                           the Centrifuge Method.

[[Page 10504]]

 
27-58..............  D5191                Standard Test Method For Vapor
                                           Pressure of Petroleum
                                           Products (Mini Method).
------------------------------------------------------------------------

    Anyone wishing to employ this entity to conduct laboratory analyses 
and gauger services should request and receive written assurances from 
the entity that it is accredited or approved by the U.S. Customs and 
Border Protection to conduct the specific test or gauger service 
requested. Alternatively, inquiries regarding the specific test or 
gauger service this entity is accredited or approved to perform may be 
directed to the U.S. Customs and Border Protection by calling (202) 
344-1060. The inquiry may also be sent to [email protected]. 
Please reference the website listed below for a complete listing of CBP 
approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.

    Dated: March 5, 2018.
James D. Sweet,
Acting Executive Director, Laboratories and Scientific Services 
Directorate.
[FR Doc. 2018-04758 Filed 3-8-18; 8:45 am]
 BILLING CODE 9111-14-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.