Foreign-Trade Zone (FTZ) 138-Franklin County, Ohio; Notification of Proposed Production Activity; International Converter (Insulation Facer); Caldwell, Ohio, 8966-8967 [2018-04288]
Download as PDF
8966
Federal Register / Vol. 83, No. 42 / Friday, March 2, 2018 / Notices
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
11, 2018.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202)
482–0473.
Dated: February 27, 2018.
Andrew McGilvray,
Executive Secretary.
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
11, 2018. Rebuttal comments in
response to material submitted during
the foregoing period may be submitted
during the subsequent 15-day period to
April 26, 2018.
A copy of the application will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Kathleen Boyce at Kathleen.Boyce@
trade.gov or (202) 482–1346.
Dated: February 26, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018–04290 Filed 3–1–18; 8:45 am]
BILLING CODE 3510–DS–P
[FR Doc. 2018–04289 Filed 3–1–18; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
DEPARTMENT OF COMMERCE
[S–39–2018]
Foreign-Trade Zones Board
Foreign-Trade Zone 78—Nashville,
Tennessee; Application for Subzone;
CEVA Freight LLC; Mount Juliet and
Lebanon, Tennessee
daltland on DSKBBV9HB2PROD with NOTICES
Foreign-Trade Zones Board
[B–13–2018]
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Metropolitan Government of
Nashville and Davidson County, grantee
of FTZ 78, requesting subzone status for
the facilities of CEVA Freight LLC,
located in Mount Juliet and Lebanon,
Tennessee. The application was
submitted pursuant to the provisions of
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the FTZ Board (15 CFR
part 400). It was formally docketed on
February 26, 2018.
The proposed subzone would consist
of: Site 1 (32.92 acres), three buildings
located at 12002, 12008 and 12014
Volunteer Boulevard, Mount Juliet; and,
Site 2 (1.70 acres), one building at
1442C Toshiba Dr., Lebanon. No
authorization for production activity has
been requested at this time. The
proposed subzone would be subject to
the existing activation limit of FTZ 78.
In accordance with the FTZ Board’s
regulations, Kathleen Boyce of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
VerDate Sep<11>2014
18:10 Mar 01, 2018
Jkt 244001
Foreign-Trade Zone (FTZ) 138—
Franklin County, Ohio; Notification of
Proposed Production Activity;
International Converter (Insulation
Facer); Caldwell, Ohio
International Converter (IC) submitted
a notification of proposed production
activity to the FTZ Board for its facility
in Caldwell, Ohio. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on February 23,
2018.
The applicant indicates that it will be
submitting a separate application for
FTZ designation at the IC facility under
FTZ 138. The facility is used for the
production of insulation facer using a
wet-bond or dry-bond lamination
process. Pursuant to 15 CFR 400.14(b),
FTZ activity would be limited to the
specific foreign-status materials/
components and specific finished
products described in the submitted
notification (as described below) and
subsequently authorized by the FTZ
Board.
Production under FTZ procedures
could exempt IC from customs duty
payments on the foreign-status
materials/components used in export
production. For foreign-status
components subject to antidumping/
countervailing duty (AD/CVD)
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
investigations/orders, the applicant only
requests authority to use such
components in the company’s export
production. On its domestic sales, for
the foreign-status materials/components
noted below not subject to AD/CVD
orders/investigations, IC would be able
to choose the duty rates during customs
entry procedures that apply to: Printed
duplex insulation facer consisting of
paper backed with aluminum foil; not
printed duplex insulation facer
consisting of paper backed with
aluminum foil; printed triplex
insulation facer, consisting of paper
with aluminum foil on either side; not
printed triplex insulation facer,
consisting of paper with aluminum foil
on either side; printed quadlaminate
insulation facer, consisting of paper
with aluminum foil on either side, and
fabric scrim on one outer layer; and, not
printed quadlaminate insulation facer,
consisting of paper with aluminum foil
on either side, and fabric scrim on one
outer layer (duty rate ranges from dutyfree to 3.7%). IC has indicated that all
scrap/waste from the lamination process
would be exported. Customs duties also
could possibly be deferred or reduced
on foreign-status production equipment.
The materials/components sourced
from abroad include: aluminum foil in
rolls, 0.00025 inches thick; aluminum
foil in rolls, 0.00027 inches thick;
aluminum foil in rolls, 0.000285 inches
thick; and, nonwoven polyethylene
terephthalate scrim fabric, in rolls, 33.84
grams per square meter (duty rate ranges
from duty-free to 5.8%). The request
indicates that the aluminum foil is
subject to AD and CVD investigations if
imported from a certain country. The
FTZ Board’s regulations (15 CFR
400.14(e)) require that merchandise
subject to AD/CVD orders, or items
which would be otherwise subject to
suspension of liquidation under AD/
CVD procedures if they entered U.S.
customs territory, be admitted to the
zone in privileged foreign status (19
CFR 146.41). As noted above, the
request indicates that any aluminum foil
subject to an AD/CVD investigation/
order would be used only in production
for export.
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary at the address below. The
closing period for their receipt is April
11, 2018.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW,
Washington, DC 20230–0002, and in the
E:\FR\FM\02MRN1.SGM
02MRN1
Federal Register / Vol. 83, No. 42 / Friday, March 2, 2018 / Notices
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact
Elizabeth Whiteman at
Elizabeth.Whiteman@trade.gov or (202)
482–0473.
Dated: February 27, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018–04288 Filed 3–1–18; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–928]
Uncovered Innerspring Units From the
People’s Republic of China: Final
Results of Antidumping Duty
Administrative Review; 2016–2017
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: For the final results of this
review, the Department of Commerce
(Commerce) continues to apply adverse
facts available (AFA) to PT Sunhere
Buana International’s (PT Sunhere)
exports of uncovered innerspring units
(innersprings) from the People’s
Republic of China (China).
DATES: Applicable March 2, 2018.
FOR FURTHER INFORMATION CONTACT: Paul
Walker, AD/CVD Operations, Office V,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–0413.
SUPPLEMENTARY INFORMATION:
AGENCY:
daltland on DSKBBV9HB2PROD with NOTICES
Background
On November 7, 2017, Commerce
published the Preliminary Results of the
eighth administrative review of
innersprings from China, for the period
of review (POR), February 1, 2016,
through January 31, 2017.1 We invited
parties to submit comments on the
Preliminary Results, but we received no
comments. Commerce conducted this
administrative review in accordance
with section 751 of the Tariff Act of
1930, as amended (the Act).
Scope of the Order
The merchandise subject to the order
is uncovered innerspring units
1 See Uncovered Innerspring Units from the
People’s Republic of China: Preliminary Results and
Rescission, in Part, of the Antidumping Duty
Administrative Review; 2016–2017, 82 FR 51602
(November 7, 2017) and accompanying Preliminary
Decision Memorandum (PDM) (collectively,
Preliminary Results).
VerDate Sep<11>2014
18:10 Mar 01, 2018
Jkt 244001
composed of a series of individual metal
springs joined together in sizes
corresponding to the sizes of adult
mattresses (e.g., twin, twin long, full,
full long, queen, California king and
king) and units used in smaller
constructions, such as crib and youth
mattresses The product is currently
classified under subheading
9404.29.9010 and has also been
classified under subheadings
9404.10.0000, 9404.29.9005,
9404.29.9011, 7326.20.0070,
7326.20.0090, 7320.20.5010,
7320.90.5010, or 7326.20.0071 of the
Harmonized Tariff Schedule of the
United States (HTSUS).2 The HTSUS
subheadings are provided for
convenience and customs purposes
only; the written description of the
scope of the order is dispositive.3
Analysis of Comments Received
As noted above, we received no
comments on the Preliminary Results.
Changes Since the Preliminary Results
As no parties submitted comments on
the Preliminary Results, Commerce has
not modified its analysis from that
presented in the Preliminary Results,
and no decision memorandum
accompanies this Federal Register
notice. Further, Commerce has made no
changes to the application of AFA to PT
Sunhere’s exports of China-origin
innersprings.4 As noted in the
Preliminary Results, in selecting an AFA
rate, Commerce’s practice has been to
assign non-cooperative respondents the
highest margin determined for any party
in the LTFV investigation or in any
administrative review; 5 thus, we
assigned PT Sunhere’s exports of Chinaorigin innersprings an individual rate of
234.51 percent based on total AFA,
which is the highest rate on the record
in this proceeding.6
2 Based on a recommendation by CBP, on
September 6, 2017, Commerce added HTS
7326.20.0090 to the scope. See Memo to the File,
from Kenneth Hawkins, Case Analyst, ‘‘Request
from Customs and Border Protection to Update the
ACE AD/CVD Case Reference File, Uncovered
Innersprings from the People’s Republic of China
(A–570–928) and South Africa (A–791–821),’’ dated
September 6, 2017.
3 For a full description of the scope of the Order,
see PDM at 3–4.
4 PT Sunhere is not a Chinese exporter of subject
merchandise. See PDM at 1. As such, we are not
treating PT Sunhere as a part of the China-wide
entity, but rather have assigned a rate to PT Sunhere
as a market economy reseller.
5 See PDM at 6; Non-Malleable Cast Iron Pipe
Fittings from the People’s Republic of China: Final
Results of Antidumping Duty Administrative
Review, 71 FR 69546 (December 1, 2006) and
accompanying IDM at Comment 1.
6 See Uncovered Innerspring Units from the
People’s Republic of China: Final Results of
Antidumping Duty Administrative Review; 2012–
2013, 79 FR 56338 (September 19, 2014).
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
8967
Assessment Rates
We have not calculated any
assessment (or cash deposit) rates in this
administrative review, because we
applied AFA to PT Sunhere. Commerce
intends to issue assessment instructions
to CBP 15 days after the publication
date of the final results of this
administrative review.
Cash Deposit Requirements
The following cash deposit
requirements will be effective upon
publication of the final results of this
administrative review for all shipments
of the subject merchandise from China
entered, or withdrawn from warehouse,
for consumption on or after the
publication date, as provided for by
section 751(a)(2)(C) of the Act: (1) For
PT Sunhere’s Chinese-origin
merchandise, the cash deposit rate will
be 234.51 percent); (2) for previously
investigated or reviewed Chinese and
non-Chinese exporters not listed above
that received a separate rate in a prior
segment of this proceeding, the cash
deposit rate will continue to be the
existing exporter-specific rate; (3) for all
Chinese exporters of subject
merchandise that have not been found
to be entitled to a separate rate, the cash
deposit rate will be that for the Chinawide entity (i.e., 234.51 percent); and (4)
for all non-Chinese exporters of subject
merchandise that have not received
their own rate, the cash deposit rate will
be the rate applicable to the Chinese
exporter that supplied that non-Chinese
exporter. These deposit requirements,
when imposed, shall remain in effect
until further notice.
Disclosure
Normally, Commerce discloses to
interested parties the calculations
performed in connection with the final
results within five days of its public
announcement, or if there is no public
announcement, within five days of the
date of publication of this notice in
accordance with 19 CFR 351.224(b).
However, because Commerce applied
AFA to PT Sunhere, there are no
calculations to disclose.
Notification to Importers
This notice also serves as a final
reminder to importers of their
responsibility under 19 CFR
351.402(f)(2) to file a certificate
regarding the reimbursement of
antidumping duties prior to liquidation
of the relevant entries during this
review period. Failure to comply with
this requirement could result in
Commerce’s presumption that
reimbursement of antidumping duties
E:\FR\FM\02MRN1.SGM
02MRN1
Agencies
[Federal Register Volume 83, Number 42 (Friday, March 2, 2018)]
[Notices]
[Pages 8966-8967]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-04288]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-13-2018]
Foreign-Trade Zone (FTZ) 138--Franklin County, Ohio; Notification
of Proposed Production Activity; International Converter (Insulation
Facer); Caldwell, Ohio
International Converter (IC) submitted a notification of proposed
production activity to the FTZ Board for its facility in Caldwell,
Ohio. The notification conforming to the requirements of the
regulations of the FTZ Board (15 CFR 400.22) was received on February
23, 2018.
The applicant indicates that it will be submitting a separate
application for FTZ designation at the IC facility under FTZ 138. The
facility is used for the production of insulation facer using a wet-
bond or dry-bond lamination process. Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific foreign-status materials/
components and specific finished products described in the submitted
notification (as described below) and subsequently authorized by the
FTZ Board.
Production under FTZ procedures could exempt IC from customs duty
payments on the foreign-status materials/components used in export
production. For foreign-status components subject to antidumping/
countervailing duty (AD/CVD) investigations/orders, the applicant only
requests authority to use such components in the company's export
production. On its domestic sales, for the foreign-status materials/
components noted below not subject to AD/CVD orders/investigations, IC
would be able to choose the duty rates during customs entry procedures
that apply to: Printed duplex insulation facer consisting of paper
backed with aluminum foil; not printed duplex insulation facer
consisting of paper backed with aluminum foil; printed triplex
insulation facer, consisting of paper with aluminum foil on either
side; not printed triplex insulation facer, consisting of paper with
aluminum foil on either side; printed quadlaminate insulation facer,
consisting of paper with aluminum foil on either side, and fabric scrim
on one outer layer; and, not printed quadlaminate insulation facer,
consisting of paper with aluminum foil on either side, and fabric scrim
on one outer layer (duty rate ranges from duty-free to 3.7%). IC has
indicated that all scrap/waste from the lamination process would be
exported. Customs duties also could possibly be deferred or reduced on
foreign-status production equipment.
The materials/components sourced from abroad include: aluminum foil
in rolls, 0.00025 inches thick; aluminum foil in rolls, 0.00027 inches
thick; aluminum foil in rolls, 0.000285 inches thick; and, nonwoven
polyethylene terephthalate scrim fabric, in rolls, 33.84 grams per
square meter (duty rate ranges from duty-free to 5.8%). The request
indicates that the aluminum foil is subject to AD and CVD
investigations if imported from a certain country. The FTZ Board's
regulations (15 CFR 400.14(e)) require that merchandise subject to AD/
CVD orders, or items which would be otherwise subject to suspension of
liquidation under AD/CVD procedures if they entered U.S. customs
territory, be admitted to the zone in privileged foreign status (19 CFR
146.41). As noted above, the request indicates that any aluminum foil
subject to an AD/CVD investigation/order would be used only in
production for export.
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary at the address
below. The closing period for their receipt is April 11, 2018.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW,
Washington, DC 20230-0002, and in the
[[Page 8967]]
``Reading Room'' section of the Board's website, which is accessible
via www.trade.gov/ftz.
For further information, contact Elizabeth Whiteman at
[email protected] or (202) 482-0473.
Dated: February 27, 2018.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2018-04288 Filed 3-1-18; 8:45 am]
BILLING CODE 3510-DS-P