Certain New Chemicals; Receipt and Status Information for October 2017, 116-120 [2017-28315]
Download as PDF
<![CDATA[
116
Federal Register / Vol. 83, No. 1 / Tuesday, January 2, 2018 / Notices
appropriate. The final ICR package will
then be submitted to OMB for review
and approval pursuant to 5 CFR
1320.12. EPA will issue another Federal
Register document pursuant to 5 CFR
1320.5(a)(1)(iv) to announce the
submission of the ICR to OMB and the
opportunity to submit additional
comments to OMB. If you have any
questions about this ICR or the approval
process, please contact the technical
person listed under FOR FURTHER
INFORMATION CONTACT.
Authority: 44 U.S.C. 3501 et seq.
Dated: December 5, 2017.
Charlotte Bertrand,
Acting Principal Deputy Assistant
Administrator, Office of Chemical Safety and
Pollution Prevention.
[FR Doc. 2017–28316 Filed 12–29–17; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2017–0410; FRL–9971–47]
SUPPLEMENTARY INFORMATION:
Certain New Chemicals; Receipt and
Status Information for October 2017
I. General Information
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
daltland on DSKBBV9HB2PROD with NOTICES
A. Does this action apply to me?
EPA is required under the
Toxic Substances Control Act (TSCA) to
publish in the Federal Register a notice
of receipt of a premanufacture notice
(PMN); an application for a test
marketing exemption (TME), both
pending and/or expired; and a periodic
status report on any new chemicals
under EPA review and the receipt of
notices of commencement (NOC) to
manufacture those chemicals. This
document covers the period from
October 2, 2017 to October 31, 2017.
DATES: Comments identified by the
specific case number provided in this
document, must be received on or
before February 1, 2018.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2017–0410,
and the specific PMN number or TME
number for the chemical related to your
comment, by one of the following
methods:
• Federal eRulemaking Portal: https://
www.regulations.gov. Follow the online
instructions for submitting comments.
Do not submit electronically any
information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute.
• Mail: Document Control Office
(7407M), Office of Pollution Prevention
SUMMARY:
VerDate Sep<11>2014
19:54 Dec 29, 2017
Jkt 244001
and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001.
• Hand Delivery: To make special
arrangements for hand delivery or
delivery of boxed information, please
follow the instructions at https://
www.epa.gov/dockets/contacts.html.
Additional instructions on
commenting or visiting the docket,
along with more information about
dockets generally, is available at https://
www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, IMD 7407M, Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8593;
email address: rahai.jim@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
This action is directed to the public
in general. As such, the Agency has not
attempted to describe the specific
entities that this action may apply to.
Although others may be affected, this
action applies directly to the submitters
of the actions addressed in this
document.
B. What should I consider as I prepare
my comments for EPA?
1. Submitting CBI. Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR parts 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
PO 00000
Frm 00019
Fmt 4703
Sfmt 4703
II. What action is the Agency taking?
This document provides receipt and
status reports, which cover the period
from October 2, 2017 to October 31,
2017, and consists of the PMNs and
TMEs both pending and/or expired, and
the NOCs to manufacture a new
chemical that the Agency has received
under TSCA section 5 during this time
period.
III. What is the Agency’s authority for
taking this action?
Under TSCA, 15 U.S.C. 2601 et seq.,
EPA classifies a chemical substance as
either an ‘‘existing’’ chemical or a
‘‘new’’ chemical. Any chemical
substance that is not on EPA’s TSCA
Inventory is classified as a ‘‘new
chemical,’’ while those that are on the
TSCA Inventory are classified as an
‘‘existing chemical.’’ For more
information about the TSCA Inventory,
please go to: https://www.epa.gov/
opptintr/newchems/pubs/
inventory.htm.
Anyone who plans to manufacture or
import a new chemical substance for a
non-exempt commercial purpose is
required by TSCA section 5 to provide
EPA with a PMN, before initiating the
activity. Section 5(h)(1) of TSCA
authorizes EPA to allow persons, upon
application, to manufacture (includes
import) or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section 5(a),
for ‘‘test marketing’’ purposes, which is
referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and
5(d)(3), EPA is required to publish in
the Federal Register a notice of receipt
of a PMN or an application for a TME
and to publish in the Federal Register
periodic reports on the status of new
chemicals under review and the receipt
of NOCs to manufacture those
chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that the information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
For the 51 PMNs received by EPA
during this period, Table 1 provides the
following information (to the extent that
such information is not claimed as CBI):
The EPA case number assigned to the
E:\FR\FM\02JAN1.SGM
02JAN1
117
Federal Register / Vol. 83, No. 1 / Tuesday, January 2, 2018 / Notices
PMN; the date the PMN was received by
EPA; the projected end date for EPA’s
review of the PMN; the submitting
manufacturer/importer; the potential
uses identified by the manufacturer/
importer in the PMN; and the chemical
identity.
TABLE 1—PMNS RECEIVED FROM OCTOBER 2, 2017 TO OCTOBER 31, 2017
Projected
notice end
date
Received
date
Case No.
Manufacturer/
importer
Use
10/14/2017
1/12/2018
CBI ...........................
P–17–0009 ........
10/14/2017
1/12/2018
CBI ...........................
P–17–0176 ........
10/6/2017
1/4/2018
CBI ...........................
P–17–0200 ........
10/17/2017
1/15/2018
CBI ...........................
P–17–0204 ........
10/17/2017
1/15/2018
CBI ...........................
P–17–0205 ........
P–17–0205 ........
10/17/2017
10/17/2017
1/15/2018
1/15/2018
CBI ...........................
CBI ...........................
P–17–0226 ........
10/3/2017
1/1/2018
Nease Corporation ...
P–17–0255 ........
10/2/2017
12/31/2017
Kao Specialties
Americas LLC.
P–17–0256 ........
10/10/2017
1/8/2018
Kao Specialties
Americas LLC.
P–17–0334 ........
10/10/2017
1/8/2018
CBI ...........................
P–17–0336 ........
10/4/2017
1/2/2018
CBI ...........................
P–17–0337 ........
10/4/2017
1/2/2018
CBI ...........................
P–17–0338 ........
10/4/2017
1/2/2018
CBI ...........................
P–17–0353 ........
10/12/2017
1/10/2018
CBI ...........................
P–17–0354 ........
daltland on DSKBBV9HB2PROD with NOTICES
P–17–0008 ........
10/20/2017
1/18/2018
CBI ...........................
P–17–0385 ........
10/23/2017
1/21/2018
Al-Fares Corporation
VerDate Sep<11>2014
19:54 Dec 29, 2017
Jkt 244001
PO 00000
Frm 00020
Fmt 4703
Chemical
(S) Intermediate for
(G) Modified 1,3-isobenzofurandione, polyuse in the manumer with 1,2-ethanediol, 2-ethyl-2facture of polymers.
(alkoxyalkyl)-1,3-propanediol and 1,3isobenzofurandione, alkanoate.
(S) Intermediate for
(G) Depolymerized waste plastics.
use in the manufacture of polymers.
(G) Battery ingredient (G) Carbonic acid, alkyl carbomonocyclic
ester.
(S) Monomer for use (G) 1,3-bis(substitutedbenzoyl)benzene.
to manufacture of
a high performance polymer.
(S) Monomer for high (G) 1,4-bis(substitutedbenzoyl)benzene.
performance polymer.
(G) Process reagent
(G) Bis(fluorobenzoyl)benzene.
(S) Monomer for high (G) Bis(fluorobenzoyl)benzene.
performance polymer.
(G) Bleach Catalyst .. (S) Manganese(2+ ), bis(octahydro-1,4,7trimethyl-1h-1,4,7-triazonine.kappa.N1,Kappa.N4,kappa.N7)tri-.mu.oxodi-,hexafluorophosphate(1-) (1:2).
(G) Additive in toner
(G) Carbomonocyclic dicarboxylic acid,
polymer with carbomonocyclic
dicarboxylic acid, alkanedioic acid,
alkenedioic acid, substituted dioxoheteropolycyclic, substituted dioxoheteropolycyclic, alkanedioic acid,
alkoxylated alkylidene dicarbomonocycle
and alkoxylated alkylidene
dicarbomonocycle, ester.
(G) Support resin ..... (G) Carbopolycyclic dicarboxylic acid,
dialkyl ester, polymer with dialkyl
carbomonocyclic diester, dialkyl substituted carbomonocyclic diester alkali
metal salt and alkanediol.
(G) Chemical pre(G) Halogenated alkyl monocyclicamide.
cursor.
(S) Cathode material (S) Aluminum cobalt lithium nickel oxide.
for lithium ion battery.
(S) Cathode material (S) Aluminum boron cobalt lithium nickel
for lithium ion batoxide.
teries.
(S) Cathode material (S) Aluminum boron cobalt lithium magnefor lithium ion batsium nickel oxide.
teries.
(G) Additive in resin
(G) Heteromonocycle, 2manufacture.
[(bicarbomonocycle-2-substituted)alkyl]-.
(G) Function as a
(G) (substitutedsolvent in electrodialkyl(c=1∼7)silyl)alkanenitrile.
lyte solution in batteries which will
improve the performance of the
batteries in consumer electronics
and automotive applications.
(S) Cleaning product (S) Carbonic acid, bis(2-ethylhexyl) ester.
for detailing vehicles. Industrial use
emollient.
Sfmt 4703
E:\FR\FM\02JAN1.SGM
02JAN1
118
Federal Register / Vol. 83, No. 1 / Tuesday, January 2, 2018 / Notices
TABLE 1—PMNS RECEIVED FROM OCTOBER 2, 2017 TO OCTOBER 31, 2017—Continued
Projected
notice end
date
Received
date
Case No.
Manufacturer/
importer
Use
10/25/2017
1/23/2018
CBI ...........................
(G) rubber products
P–17–0405 ........
10/2/2017
12/31/2017
CBI ...........................
P–17–0406 ........
10/2/2017
12/31/2017
CBI ...........................
P–18–0001 ........
10/5/2017
1/3/2018
Nexus Fuels .............
(G) Oil and gas well
performance.
(G) Oil and gas well
performance.
(G) Additive ..............
P–18–0002 ........
10/2/2017
12/31/2017
CBI ...........................
P–18–0004 ........
10/10/2017
1/8/2018
CBI ...........................
P–18–0005 ........
10/11/2017
1/9/2018
CBI ...........................
(G) Component for
tire.
P–18–0006 ........
P–18–0007 ........
10/3/2017
10/4/2017
1/1/2018
1/2/2018
CBI ...........................
CBI ...........................
P–18–0008 ........
10/4/2017
1/2/2018
CBI ...........................
P–18–0009 ........
10/4/2017
1/2/2018
CBI ...........................
(S) Intermediate .......
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(S) Used as a plasticizer/stabilizer for
flexible PVC.
(G) Lubricant additive
P–18–0010 ........
10/11/2017
1/9/2018
CBI ...........................
P–18–0011 ........
10/5/2017
1/3/2018
Dioxide Materials .....
P–18–0012 ........
P–18–0013 ........
10/6/2017
10/7/2017
1/4/2018
1/5/2018
CBI ...........................
Shin-Etsu Microsi .....
P–18–0014 ........
10/7/2017
1/5/2018
Shin-Etsu Microsi .....
P–18–0016 ........
10/11/2017
1/9/2018
CBI ...........................
P–18–0017 ........
10/18/2017
1/16/2018
Allnex USA Inc .........
P–18–0019 ........
10/13/2017
1/11/2018
Cabot Corporation ....
(S) Dispersive pigment.
P–18–0020 ........
10/16/2017
1/14/2018
CBI ...........................
(G) Composites ........
(G) Industrial Coating
P–18–0021 ........
10/17/2017
1/15/2018
CBI ...........................
(G) paint ...................
P–18–0022 ........
daltland on DSKBBV9HB2PROD with NOTICES
P–17–0400 ........
10/16/2017
1/14/2018
Allnex USA Inc .........
(S) Corrosion protection.
P–18–0023 ........
10/16/2017
1/14/2018
CBI ...........................
P–18–0025 ........
10/17/2017
1/15/2018
CBI ...........................
(S) Epoxy hardner/
curative.
(G) Oil Additive ........
VerDate Sep<11>2014
19:54 Dec 29, 2017
Jkt 244001
PO 00000
Frm 00021
Fmt 4703
(S) Chemical intermediate.
(G) Dispersant ..........
(S) Polyurethane catalyst.
(S) It is used to add
amine function to a
polymer.
(G) Adhesives ..........
(G) Microlithography
for electronic device manufacturing.
(G) Microlithography
for electronic device manufacturing.
(G) Additives used in
Semiconductor
chip manufacturing.
(S) Corrosion protection.
Sfmt 4703
Chemical
(G) Terpolymer of vinylidene fluoride,
tetrafluoroehylene and 2,3,3,3tetrafluoropropene.
(G) Halogentated benzoic acid ethyl ester.
(G) Halogenated benzoic acid ethyl ester.
(G) Carbon compound (compd) derived
from plastic depolymerization.
(G) Phosphinic acid, p,p-alkyl-, salt.
(G) Alkoxy phosphate compd with
alkylamine.
(G) Buta-1,3-diene reaction product with
alkyl aluminum and alkyl silyl substances.
(S) 2-propenenitrile, trimer.
(S) Glycerides, soya mono- and di-,
epoxidized, acetates.
(S) Glycerides, C16-18 and C18-unsaturated
mono- and di-, epoxidized, acetates.
(G) Phosphonic acid, dimethyl ester, polymer with alkyl diols.
(G) Aminoalkylated imidazole, n-me derivs.
(S) 1,2,4,5-tetramethylimidazole.
(G) Polyester polyol.
(G) Substituted-triphenylsulfonium, inner
salt.
(G) Sulfonium, triphenyl-, salt with
disubstituted-heterocyclic compound
(1:1).
(G) Aromatic sulfonium tricyclo fluoroalkyl
sulfonic acid salt.
(G) Substituted carbomonocycle, polymer
with substituted heteromonocycle and
substituted polyalkylene glycol.
(G) Substituted benzene, 4-[2-[2-hydroxy3-[[(3-nitrophenyl)amino]carbonyl]-1naphthalenyl]diazenyl]-, sodium salt
(1:1).
(S) Butanediolic acid, polyol with 2-ethyl-2(hydroxymethyl)-1,3-propanediol, 2,5furandione and 1,3-propanediol,
3a,4,5,6,7,7a-hexahydro-4,7-methano1h-inden-5(or 6)-yl ester.
(G) Dicarboxylic acids, polymers with substituted poly( substituted alkendiyl) ,3hydroxy-2-(hydroxyalkyl)-2-alkylalkenoic
acid, 5-substituted-1-(substituted alkyl)1,3,3-trialkyl carbomonocyle, alkanediol,
alkane-triol, alcohol blocked compounds
with aminoalcohol.
(G) Substituted carbomonocycle, polymer
with halo substituted heteromonocycle
and polyoxyalkylene polymer with
alkylenebis[isocyanatocarbomonocycle]
bis (carbomonocycle-dicarboxylate), reaction products with alkylamines,
hydrolyzed.
(G) Propanediol phosphate.
(G) Phosphoric acid, dialkyl ester, transition metal salt.
E:\FR\FM\02JAN1.SGM
02JAN1
119
Federal Register / Vol. 83, No. 1 / Tuesday, January 2, 2018 / Notices
TABLE 1—PMNS RECEIVED FROM OCTOBER 2, 2017 TO OCTOBER 31, 2017—Continued
Projected
notice end
date
Received
date
Case No.
Manufacturer/
importer
Use
Chemical
(S) Silsesquioxanes, 2,4,4-trimethylpentyl,
hydroxy-terminated.
(G) 2-propenoic acid, 2-alkyl-, 2(dialkylamino)alkyl ester, polymer with
alpha-(2-alkyl-1-oxo-2-alken-1-yl)omega-methoxypoly(oxy-1,2-alkanediyl).
(G) Branched cyclic and linear hydrocarbons from plastic depolymerization.
(G) Fatty acids and fatty acid unsaturated,
reaction products with ethyleneamines
and maleic anhydride.
(G) Poly[oxy(methylalkylendiyl)],alpha,alpha’,alpha’’-1,2,3alkanetriyltris[omega-hydroxy-, polymer
with 1,1′-alkylenebis[4isocyanatocarbomonocycle], 2-substituted ethyl acrylate- and 2-substituted
ethyl metacrylate-blocked.
(G) Substituted dicarboxylic acid, polymer
with various alkanediols.
(G) Alkyl alkenoic acid, alkyl ester, polymer with alkyl alkenoate, dialkyl
alkanediol, substituted carbomonocycle,
disubstituted heteromonocycle,
disubstituted heteropolycyclic,
alkanediol, substituted alkyl alkyl
alkenoate and substituted
heteromonocycle, dialkyl peroxide initiated.
(G) 2-propenenitrile, reaction products with
alkylamine, hydrogenated, acids.
(G) Polyetheramine carboxylate salt.
P–18–0026 ........
10/23/2017
1/21/2018
Hybrid Plastics, Inc ..
(G) oil additive ..........
P–18–0027 ........
10/19/2017
1/17/2018
CBI ...........................
(G) The polymer will
be used as an additive in coatings.
P–18–0028 ........
10/18/2017
1/16/2018
CBI ...........................
(G) Blending stock ...
P–18–0029 ........
10/20/2017
1/18/2018
CBI ...........................
(G) Industrial use in
Oilfield.
P–18–0030 ........
10/23/2017
1/21/2018
Miwon North America, Inc.
(S) Resins for Industrial coating.
P–18–0031 ........
10/25/2017
1/23/2018
CBI ...........................
P–18–0032 ........
10/27/2017
1/25/2018
US Paint Corp ..........
(G) Ingredient for industrial coating.
(G) Component of
coating.
P–18–0033 ........
10/30/2017
01/28/2018
CBI ...........................
P–18–0034 ........
10/30/2017
1/28/2018
CBI ...........................
P–18–0037 ........
10/30/2017
01/28/2018
SHIN–ETSU Microsi
For the 22 NOCs received by EPA
during this period, Table 2 provides the
following information (to the extent that
such information is not claimed as CBI):
(S) Epoxy curing
agent.
(S) Polyetheramine
carboxylate salt
used as a dispersing agent for
pigments in industrial paints and
coatings.
(G) Microlithography
for electronic device manufacturing.
The EPA case number assigned to the
NOC; the date the NOC was received by
EPA; the projected date of
commencement provided by the
(G) Sulfonium, triphenyl-, salt with 2,4,5trisubstituted-benzenesulfonate (1:1).
submitter in the NOC; and the chemical
identity.
TABLE 2—NOCS RECEIVED FROM OCTOBER 2, 2017 TO OCTOBER 31, 2017
Case No.
Received date
Commencement
notice end
date
10/9/2017
10/12/2017
1/25/2001
10/2/2017
P–05–0415 .....................
P–08–0058 .....................
daltland on DSKBBV9HB2PROD with NOTICES
P–99–0649 .....................
P–04–0773 .....................
10/2/2017
10/6/2017
9/6/2016
9/21/2017
P–08–0724 .....................
P–12–0241 .....................
10/2/2017
10/11/2017
8/23/2016
10/11/2017
P–12–0513 .....................
10/2/2017
7/16/2016
VerDate Sep<11>2014
19:54 Dec 29, 2017
Jkt 244001
PO 00000
Chemical
(G) Ethylene terpolymer.
(S) Siloxanes and silicones, 3-[3-(diethylmethylammonio)-2- hydroxypropoxy]propyl
me, di-me, chlorides.
(G) Acrylic polymer with styrene, peroxy-initiated.
(S) Nonadecane, 9-methylene-, mixed with 1-decene, dimers and trimers, hydrogenated.
(G) Cycloaliphatic anhydride, polymer with hydroxy alkyl diol, alkyl ester.
(G) [2-propenoic acid, 2-methyl-, 2-hydroxyethyl esters, telomers with C18-26-alkyl
acrylate,
1-dodecanethiol,
N-(hydroxymethyl)-2-methyl-2-propenamide,
3,3,4,4,5,5,6,6,7,7,8,8,8-tridecaflourooctyl methacrylate, 2,2-[1,2 diazenedylbis(1methylethylidene)]bis[4,5-dihydro-1H- imidazole]hydrochloride (1:2)-initiated].
(G) Aromatic dicarboxylic acid, polymer with dialkyl alkanediol, alkyl-(hydroxyalkyl)alkanediol, dicarboxylic acid, heteropolcyclic anhydride, alkanetriol, hydroxy[(oxoalkyl)oxy]alkyl ester.
Frm 00022
Fmt 4703
Sfmt 4703
E:\FR\FM\02JAN1.SGM
02JAN1
120
Federal Register / Vol. 83, No. 1 / Tuesday, January 2, 2018 / Notices
TABLE 2—NOCS RECEIVED FROM OCTOBER 2, 2017 TO OCTOBER 31, 2017—Continued
Case No.
Commencement
notice end
date
Received date
P–13–0754 .....................
P–14–0112 .....................
10/20/2017
10/24/2017
10/23/2013
10/13/2017
P–14–0758 .....................
10/11/2017
9/27/2017
P–14–0869 .....................
10/4/2017
9/23/2017
P–15–0322 .....................
10/19/2017
9/26/2016
P–15–0753 .....................
P–16–0042 .....................
P–16–0246 .....................
10/13/2017
10/3/2017
10/23/2017
8/29/2016
6/16/2016
10/17/2017
P–16–0322 .....................
P–16–0466 .....................
10/10/2017
10/2/2017
10/2/2017
11/30/2016
P–16–0493 .....................
10/25/2017
10/16/2017
P–16–0590 .....................
10/18/2017
9/20/2017
P–17–0019 .....................
10/2/2017
2/8/2017
P–17–0227 .....................
10/3/2017
6/23/2017
P–17–0236 .....................
10/6/2017
10/6/2017
Authority: 15 U.S.C. 2601 et seq.
Dated: December 12, 2017.
Pamela Myrick,
Director, Information Management Division,
Office of Pollution Prevention and Toxics.
[FR Doc. 2017–28315 Filed 12–29–17; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2013–0677; FRL–9972–16]
Receipt of Information Under the Toxic
Substances Control Act
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is announcing its receipt
of information submitted pursuant to a
rule, order, or consent agreement issued
under the Toxic Substances Control Act
(TSCA). As required by TSCA, this
document identifies each chemical
substance and/or mixture for which
information has been received; the uses
or intended uses of such chemical
substance and/or mixture; and describes
the nature of the information received.
Each chemical substance and/or mixture
daltland on DSKBBV9HB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
19:54 Dec 29, 2017
Jkt 244001
Chemical
(G) Alkylphenol.
(G) Amides, from polyethylenepolyamines and tall-oil fatty acids, reaction products
with alkyl monopolyisobutylene derivs.
(S) 2-propenenitrile, polymer with methanamine, hydrogenated, 3-aminopropyl-terminated, ethoxylated, propoxylated.
(G) Hexanedioic acid, polymer with alkyldiol, 1,6-hexanediol, dicarboxylic acid anhydride, 1,1′-methylenebis[isocyanatobenzene], alkylene oxides and .alpha.,
.alpha.′,
.alpha.″-1,2,3-propanetriyltris[.omega.-hydroxypoly[oxy(methyl-1,2ethanediyl)]].
(G) Poly[oxy(alkanediyl)],.alpha.,.alpha.′,.alpha.″-1,2,3-propanetriyltris[.omega.-(2hydroxy-3-mercaptopropoxy)-.
(G) Polyester amine adduct.
(G) Polyammonium salt of a fatty acid.
(S) 2-pyridinecarboxylic acid, 6-(4-chloro-2-fluoro-3-methoxyphenyl)-4,5-difluoro-,
phenylmethyl ester.
(G) Manganese cyclic (tri)amine chloride complex.
(G) 2,5-furandione, telomer with ethenylbenzene and (1-methylethyl)benzene, amides with polyethylene-polypropylene glycol aminoalkyl me ether, alkali salts.
(G) Dicarboxylic acids, polymers with alkyl prop-2-enoate, alkyl 2-methylprop-2enoate, alkyl[(alkenyl)alkyl]alkanediol, alkanediol, alkanedioic acid, alkyl 2methylprop-2-enoate,alkyl prop-2-enoic acid,alkylene [isocyanatocarbomonocyle]
and alkanediol, alkanolamine-blocked, compds with 2·(alkylamino)alkanol.
(S) Silica gel, reaction products with chromium oxide (cro3) and
ethoxydiethylaluminum.
(G) Hydroxyl alkyl acrylate ester, polymer with acrylates, aromatic vinyl monomer,
cycloaliphatic lactone, and alkyl carboxylic acid, peroxide initiated.
(G) 2-propenoic acid, alkyl-, alkyl ester, polymer with alkyl 2-propenoate and
alpha-(2-alkyl-1-oxo-2-propen-1-yl-omega-methoxypoly(oxy-1,2-alkanediyl), ester
with alpha-2-propen-1-yl-omega-hydroxypoly(oxy-1,2-ethanediyl).
(G) Formaldehyde, polymer with (chloromethyl) oxirane and substituted aromatic
compounds.
related to this announcement is
identified in Unit I. under
SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT:
For technical information contact:
John Schaeffer, Chemical Control
Division (7405M), Office of Pollution
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8173;
email address: schaeffer.john@epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Chemical Substances and/or Mixtures
Information received about the
following chemical substance(s) and/or
mixture(s) is provided in Unit IV.:
Benzene, 1-chloro-4-(trifluoromethyl)(CASRN 98–56–6).
II. Authority
Section 4(d) of TSCA (15 U.S.C.
2603(d)) requires EPA to publish a
notice in the Federal Register reporting
the receipt of information submitted
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
pursuant to a rule, order, or consent
agreement promulgated under TSCA
section 4 (15 U.S.C. 2603).
III. Docket Information
A docket, identified by the docket
identification (ID) number EPA–HQ–
OPPT–2013–0677, has been established
for this Federal Register document,
which announces the receipt of the
information. Upon EPA’s completion of
its quality assurance review, the
information received will be added to
the docket identified in Unit IV., which
represents the docket used for the TSCA
section 4 rule, order, and/or consent
agreement. In addition, once completed,
EPA reviews of the information received
will be added to the same docket. Use
the docket ID number provided in Unit
IV. to access the information received
and any available EPA review.
EPA’s dockets are available
electronically at https://
www.regulations.gov or in person at the
Office of Pollution Prevention and
Toxics Docket (OPPT Docket),
Environmental Protection Agency
Docket Center (EPA/DC), West William
Jefferson Clinton Bldg., Rm. 3334, 1301
Constitution Ave. NW, Washington, DC.
The Public Reading Room is open from
E:\FR\FM\02JAN1.SGM
02JAN1
]]>Agencies
[Federal Register Volume 83, Number 1 (Tuesday, January 2, 2018)]
[Notices]
[Pages 116-120]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-28315]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2017-0410; FRL-9971-47]
Certain New Chemicals; Receipt and Status Information for October
2017
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of notices
of commencement (NOC) to manufacture those chemicals. This document
covers the period from October 2, 2017 to October 31, 2017.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before February 1, 2018.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2017-0410, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: https://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at https://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, IMD 7407M, Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR parts 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from October 2, 2017 to October 31, 2017, and consists of the
PMNs and TMEs both pending and/or expired, and the NOCs to manufacture
a new chemical that the Agency has received under TSCA section 5 during
this time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory, please go to: https://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 51 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the
[[Page 117]]
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer/importer; the
potential uses identified by the manufacturer/importer in the PMN; and
the chemical identity.
Table 1--PMNs Received From October 2, 2017 to October 31, 2017
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer/ Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
P-17-0008............ 10/14/2017 1/12/2018 CBI............. (S) Intermediate (G) Modified 1,3-
for use in the isobenzofurandione,
manufacture of polymer with 1,2-
polymers. ethanediol, 2-ethyl-
2-(alkoxyalkyl)-1,3-
propanediol and 1,3-
isobenzofurandione,
alkanoate.
P-17-0009............ 10/14/2017 1/12/2018 CBI............. (S) Intermediate (G) Depolymerized
for use in the waste plastics.
manufacture of
polymers.
P-17-0176............ 10/6/2017 1/4/2018 CBI............. (G) Battery (G) Carbonic acid,
ingredient. alkyl
carbomonocyclic
ester.
P-17-0200............ 10/17/2017 1/15/2018 CBI............. (S) Monomer for (G) 1,3-
use to bis(substitutedbenzo
manufacture of yl)benzene.
a high
performance
polymer.
P-17-0204............ 10/17/2017 1/15/2018 CBI............. (S) Monomer for (G) 1,4-
high bis(substitutedbenzo
performance yl)benzene.
polymer.
P-17-0205............ 10/17/2017 1/15/2018 CBI............. (G) Process (G)
reagent. Bis(fluorobenzoyl)be
nzene.
P-17-0205............ 10/17/2017 1/15/2018 CBI............. (S) Monomer for (G)
high Bis(fluorobenzoyl)be
performance nzene.
polymer.
P-17-0226............ 10/3/2017 1/1/2018 Nease (G) Bleach (S) Manganese(2+ ),
Corporation. Catalyst. bis(octahydro-1,4,7-
trimethyl-1h-1,4,7-
triazonine-
.kappa.N1,Kappa.N4,k
appa.N7)tri-.mu.-
oxodi-
,hexafluorophosphate
(1-) (1:2).
P-17-0255............ 10/2/2017 12/31/2017 Kao Specialties (G) Additive in (G) Carbomonocyclic
Americas LLC. toner. dicarboxylic acid,
polymer with
carbomonocyclic
dicarboxylic acid,
alkanedioic acid,
alkenedioic acid,
substituted dioxo-
heteropolycyclic,
substituted dioxo-
heteropolycyclic,
alkanedioic acid,
alkoxylated
alkylidene
dicarbomonocycle and
alkoxylated
alkylidene
dicarbomonocycle,
ester.
P-17-0256............ 10/10/2017 1/8/2018 Kao Specialties (G) Support (G) Carbopolycyclic
Americas LLC. resin. dicarboxylic acid,
dialkyl ester,
polymer with dialkyl
carbomonocyclic
diester, dialkyl
substituted
carbomonocyclic
diester alkali metal
salt and alkanediol.
P-17-0334............ 10/10/2017 1/8/2018 CBI............. (G) Chemical (G) Halogenated alkyl
precursor. monocyclicamide.
P-17-0336............ 10/4/2017 1/2/2018 CBI............. (S) Cathode (S) Aluminum cobalt
material for lithium nickel
lithium ion oxide.
battery.
P-17-0337............ 10/4/2017 1/2/2018 CBI............. (S) Cathode (S) Aluminum boron
material for cobalt lithium
lithium ion nickel oxide.
batteries.
P-17-0338............ 10/4/2017 1/2/2018 CBI............. (S) Cathode (S) Aluminum boron
material for cobalt lithium
lithium ion magnesium nickel
batteries. oxide.
P-17-0353............ 10/12/2017 1/10/2018 CBI............. (G) Additive in (G) Heteromonocycle,
resin 2-[(bicarbomonocycle-
manufacture. 2-substituted)alkyl]-
.
P-17-0354............ 10/20/2017 1/18/2018 CBI............. (G) Function as (G) (substituted-
a solvent in dialkyl(c=1~7)silyl)
electrolyte alkanenitrile.
solution in
batteries which
will improve
the performance
of the
batteries in
consumer
electronics and
automotive
applications.
P-17-0385............ 10/23/2017 1/21/2018 Al-Fares (S) Cleaning (S) Carbonic acid,
Corporation. product for bis(2-ethylhexyl)
detailing ester.
vehicles.
Industrial use
emollient.
[[Page 118]]
P-17-0400............ 10/25/2017 1/23/2018 CBI............. (G) rubber (G) Terpolymer of
products. vinylidene fluoride,
tetrafluoroehylene
and 2,3,3,3-
tetrafluoropropene.
P-17-0405............ 10/2/2017 12/31/2017 CBI............. (G) Oil and gas (G) Halogentated
well benzoic acid ethyl
performance. ester.
P-17-0406............ 10/2/2017 12/31/2017 CBI............. (G) Oil and gas (G) Halogenated
well benzoic acid ethyl
performance. ester.
P-18-0001............ 10/5/2017 1/3/2018 Nexus Fuels..... (G) Additive.... (G) Carbon compound
(compd) derived from
plastic
depolymerization.
P-18-0002............ 10/2/2017 12/31/2017 CBI............. (S) Chemical (G) Phosphinic acid,
intermediate. p,p-alkyl-, salt.
P-18-0004............ 10/10/2017 1/8/2018 CBI............. (G) Dispersant.. (G) Alkoxy phosphate
compd with
alkylamine.
P-18-0005............ 10/11/2017 1/9/2018 CBI............. (G) Component (G) Buta-1,3-diene
for tire. reaction product
with alkyl aluminum
and alkyl silyl
substances.
P-18-0006............ 10/3/2017 1/1/2018 CBI............. (S) Intermediate (S) 2-propenenitrile,
trimer.
P-18-0007............ 10/4/2017 1/2/2018 CBI............. (S) Used as a (S) Glycerides, soya
plasticizer/ mono- and di-,
stabilizer for epoxidized,
flexible PVC. acetates.
P-18-0008............ 10/4/2017 1/2/2018 CBI............. (S) Used as a (S) Glycerides, C16-
plasticizer/ 18 and C18-
stabilizer for unsaturated mono-
flexible PVC. and di-, epoxidized,
acetates.
P-18-0009............ 10/4/2017 1/2/2018 CBI............. (G) Lubricant (G) Phosphonic acid,
additive. dimethyl ester,
polymer with alkyl
diols.
P-18-0010............ 10/11/2017 1/9/2018 CBI............. (S) Polyurethane (G) Aminoalkylated
catalyst. imidazole, n-me
derivs.
P-18-0011............ 10/5/2017 1/3/2018 Dioxide (S) It is used (S) 1,2,4,5-
Materials. to add amine tetramethylimidazole
function to a .
polymer.
P-18-0012............ 10/6/2017 1/4/2018 CBI............. (G) Adhesives... (G) Polyester polyol.
P-18-0013............ 10/7/2017 1/5/2018 Shin-Etsu (G) (G) Substituted-
Microsi. Microlithograph triphenylsulfonium,
y for inner salt.
electronic
device
manufacturing.
P-18-0014............ 10/7/2017 1/5/2018 Shin-Etsu (G) (G) Sulfonium,
Microsi. Microlithograph triphenyl-, salt
y for with disubstituted-
electronic heterocyclic
device compound (1:1).
manufacturing.
P-18-0016............ 10/11/2017 1/9/2018 CBI............. (G) Additives (G) Aromatic
used in sulfonium tricyclo
Semiconductor fluoroalkyl sulfonic
chip acid salt.
manufacturing.
P-18-0017............ 10/18/2017 1/16/2018 Allnex USA Inc.. (S) Corrosion (G) Substituted
protection. carbomonocycle,
polymer with
substituted
heteromonocycle and
substituted
polyalkylene glycol.
P-18-0019............ 10/13/2017 1/11/2018 Cabot (S) Dispersive (G) Substituted
Corporation. pigment. benzene, 4-[2-[2-
hydroxy-3-[[(3-
nitrophenyl)amino]ca
rbonyl]-1-
naphthalenyl]diazeny
l]-, sodium salt
(1:1).
P-18-0020............ 10/16/2017 1/14/2018 CBI............. (G) Composites.. (S) Butanediolic
(G) Industrial acid, polyol with 2-
Coating. ethyl-2-
(hydroxymethyl)-1,3-
propanediol, 2,5-
furandione and 1,3-
propanediol,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1h-inden-
5(or 6)-yl ester.
P-18-0021............ 10/17/2017 1/15/2018 CBI............. (G) paint....... (G) Dicarboxylic
acids, polymers with
substituted poly(
substituted
alkendiyl) ,3-
hydroxy-2-
(hydroxyalkyl)-2-
alkylalkenoic acid,
5-substituted-1-
(substituted alkyl)-
1,3,3-trialkyl
carbomonocyle,
alkanediol, alkane-
triol, alcohol
blocked compounds
with aminoalcohol.
P-18-0022............ 10/16/2017 1/14/2018 Allnex USA Inc.. (S) Corrosion (G) Substituted
protection. carbomonocycle,
polymer with halo
substituted
heteromonocycle and
polyoxyalkylene
polymer with
alkylenebis[isocyana
tocarbomonocycle]
bis (carbomonocycle-
dicarboxylate),
reaction products
with alkylamines,
hydrolyzed.
P-18-0023............ 10/16/2017 1/14/2018 CBI............. (S) Epoxy (G) Propanediol
hardner/ phosphate.
curative.
P-18-0025............ 10/17/2017 1/15/2018 CBI............. (G) Oil Additive (G) Phosphoric acid,
dialkyl ester,
transition metal
salt.
[[Page 119]]
P-18-0026............ 10/23/2017 1/21/2018 Hybrid Plastics, (G) oil additive (S) Silsesquioxanes,
Inc. 2,4,4-
trimethylpentyl,
hydroxy-terminated.
P-18-0027............ 10/19/2017 1/17/2018 CBI............. (G) The polymer (G) 2-propenoic acid,
will be used as 2-alkyl-, 2-
an additive in (dialkylamino)alkyl
coatings. ester, polymer with
alpha-(2-alkyl-1-oxo-
2-alken-1-yl)-omega-
methoxypoly(oxy-1,2-
alkanediyl).
P-18-0028............ 10/18/2017 1/16/2018 CBI............. (G) Blending (G) Branched cyclic
stock. and linear
hydrocarbons from
plastic
depolymerization.
P-18-0029............ 10/20/2017 1/18/2018 CBI............. (G) Industrial (G) Fatty acids and
use in Oilfield. fatty acid
unsaturated,
reaction products
with ethyleneamines
and maleic
anhydride.
P-18-0030............ 10/23/2017 1/21/2018 Miwon North (S) Resins for (G) Poly[oxy(methyl-
America, Inc. Industrial alkylendiyl)],alpha,
coating. alpha',alpha''-1,2,3-
alkanetriyltris[omeg
a-hydroxy-, polymer
with 1,1'-
alkylenebis[4-
isocyanatocarbomonoc
ycle], 2-substituted
ethyl acrylate- and
2-substituted ethyl
metacrylate-blocked.
P-18-0031............ 10/25/2017 1/23/2018 CBI............. (G) Ingredient (G) Substituted
for industrial dicarboxylic acid,
coating. polymer with various
alkanediols.
P-18-0032............ 10/27/2017 1/25/2018 US Paint Corp... (G) Component of (G) Alkyl alkenoic
coating. acid, alkyl ester,
polymer with alkyl
alkenoate, dialkyl
alkanediol,
substituted
carbomonocycle,
disubstituted
heteromonocycle,
disubstituted
heteropolycyclic,
alkanediol,
substituted alkyl
alkyl alkenoate and
substituted
heteromonocycle,
dialkyl peroxide
initiated.
P-18-0033............ 10/30/2017 01/28/2018 CBI............. (S) Epoxy curing (G) 2-propenenitrile,
agent. reaction products
with alkylamine,
hydrogenated, acids.
P-18-0034............ 10/30/2017 1/28/2018 CBI............. (S) (G) Polyetheramine
Polyetheramine carboxylate salt.
carboxylate
salt used as a
dispersing
agent for
pigments in
industrial
paints and
coatings.
P-18-0037............ 10/30/2017 01/28/2018 SHIN-ETSU (G) (G) Sulfonium,
Microsi. Microlithograph triphenyl-, salt
y for with 2,4,5-
electronic trisubstituted-
device benzenesulfonate
manufacturing. (1:1).
----------------------------------------------------------------------------------------------------------------
For the 22 NOCs received by EPA during this period, Table 2
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
Table 2--NOCs Received From October 2, 2017 to October 31, 2017
----------------------------------------------------------------------------------------------------------------
Commencement
Case No. Received date notice end Chemical
date
----------------------------------------------------------------------------------------------------------------
P-99-0649.............................. 10/9/2017 1/25/2001 (G) Ethylene terpolymer.
P-04-0773.............................. 10/12/2017 10/2/2017 (S) Siloxanes and silicones, 3-[3-
(diethylmethylammonio)-2-
hydroxypropoxy]propyl me, di-me,
chlorides.
P-05-0415.............................. 10/2/2017 9/6/2016 (G) Acrylic polymer with styrene,
peroxy-initiated.
P-08-0058.............................. 10/6/2017 9/21/2017 (S) Nonadecane, 9-methylene-, mixed
with 1-decene, dimers and trimers,
hydrogenated.
P-08-0724.............................. 10/2/2017 8/23/2016 (G) Cycloaliphatic anhydride, polymer
with hydroxy alkyl diol, alkyl ester.
P-12-0241.............................. 10/11/2017 10/11/2017 (G) [2-propenoic acid, 2-methyl-, 2-
hydroxyethyl esters, telomers with C18-
26-alkyl acrylate, 1-dodecanethiol, N-
(hydroxymethyl)-2-methyl-2-
propenamide, 3,3,4,4,5,5,6,6,7,7,8,8,8-
tridecaflourooctyl methacrylate, 2,2-
[1,2 diazenedylbis(1-
methylethylidene)]bis[4,5-dihydro-1H-
imidazole]hydrochloride (1:2)-
initiated].
P-12-0513.............................. 10/2/2017 7/16/2016 (G) Aromatic dicarboxylic acid, polymer
with dialkyl alkanediol, alkyl-
(hydroxyalkyl)-alkanediol,
dicarboxylic acid, heteropolcyclic
anhydride, alkanetriol, hydroxy-
[(oxoalkyl)oxy]alkyl ester.
[[Page 120]]
P-13-0754.............................. 10/20/2017 10/23/2013 (G) Alkylphenol.
P-14-0112.............................. 10/24/2017 10/13/2017 (G) Amides, from polyethylenepolyamines
and tall-oil fatty acids, reaction
products with alkyl
monopolyisobutylene derivs.
P-14-0758.............................. 10/11/2017 9/27/2017 (S) 2-propenenitrile, polymer with
methanamine, hydrogenated, 3-
aminopropyl-terminated, ethoxylated,
propoxylated.
P-14-0869.............................. 10/4/2017 9/23/2017 (G) Hexanedioic acid, polymer with
alkyldiol, 1,6-hexanediol,
dicarboxylic acid anhydride, 1,1'-
methylenebis[isocyanatobenzene],
alkylene oxides and .alpha., .alpha.',
.alpha.''-1,2,3-
propanetriyltris[.omega.-
hydroxypoly[oxy(methyl-1,2-
ethanediyl)]].
P-15-0322.............................. 10/19/2017 9/26/2016 (G)
Poly[oxy(alkanediyl)],.alpha.,.alpha.'
,.alpha.''-1,2,3-
propanetriyltris[.omega.-(2-hydroxy-3-
mercaptopropoxy)-.
P-15-0753.............................. 10/13/2017 8/29/2016 (G) Polyester amine adduct.
P-16-0042.............................. 10/3/2017 6/16/2016 (G) Polyammonium salt of a fatty acid.
P-16-0246.............................. 10/23/2017 10/17/2017 (S) 2-pyridinecarboxylic acid, 6-(4-
chloro-2-fluoro-3-methoxyphenyl)-4,5-
difluoro-, phenylmethyl ester.
P-16-0322.............................. 10/10/2017 10/2/2017 (G) Manganese cyclic (tri)amine
chloride complex.
P-16-0466.............................. 10/2/2017 11/30/2016 (G) 2,5-furandione, telomer with
ethenylbenzene and (1-
methylethyl)benzene, amides with
polyethylene-polypropylene glycol
aminoalkyl me ether, alkali salts.
P-16-0493.............................. 10/25/2017 10/16/2017 (G) Dicarboxylic acids, polymers with
alkyl prop-2-enoate, alkyl 2-
methylprop-2-enoate,
alkyl[(alkenyl)alkyl]alkanediol,
alkanediol, alkanedioic acid, alkyl 2-
methylprop-2-enoate,alkyl prop-2-enoic
acid,alkylene
[isocyanatocarbomonocyle] and
alkanediol, alkanolamine-blocked,
compds with
2[middot](alkylamino)alkanol.
P-16-0590.............................. 10/18/2017 9/20/2017 (S) Silica gel, reaction products with
chromium oxide (cro3) and
ethoxydiethylaluminum.
P-17-0019.............................. 10/2/2017 2/8/2017 (G) Hydroxyl alkyl acrylate ester,
polymer with acrylates, aromatic vinyl
monomer, cycloaliphatic lactone, and
alkyl carboxylic acid, peroxide
initiated.
P-17-0227.............................. 10/3/2017 6/23/2017 (G) 2-propenoic acid, alkyl-, alkyl
ester, polymer with alkyl 2-propenoate
and alpha-(2-alkyl-1-oxo-2-propen-1-yl-
omega-methoxypoly(oxy-1,2-alkanediyl),
ester with alpha-2-propen-1-yl-omega-
hydroxypoly(oxy-1,2-ethanediyl).
P-17-0236.............................. 10/6/2017 10/6/2017 (G) Formaldehyde, polymer with
(chloromethyl) oxirane and substituted
aromatic compounds.
----------------------------------------------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: December 12, 2017.
Pamela Myrick,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2017-28315 Filed 12-29-17; 8:45 am]
BILLING CODE 6560-50-P
