November 6, 2017 – Federal Register Recent Federal Regulation Documents

Results 101 - 110 of 110
Group Registration of Newspapers
Document Number: 2017-23917
Type: Proposed Rule
Date: 2017-11-06
Agency: Library of Congress, Agencies and Commissions
The U.S. Copyright Office is proposing to amend its regulation governing the group registration option for newspapers. The proposed rule will make a number of changes to reflect current Office practices, promote efficiency of the registration process, and encourage broader participation in the registration system by reducing the burden on applicants. Specifically, the proposed rule revises the definition of ``newspaper issues'' and clarifies that the group registration option is available to any qualifying ``newspaper issue.'' The proposed rule will require applicants to file an online application rather than a paper application, and upload a complete digital copy of each issue through the electronic registration system instead of submitting them in physical form. The Library of Congress intends to incorporate digital copies of newspapers received by the Office under this group registration option, and provide public access to them, subject to certain restrictions set forth in the proposed rule. Applicants may continue to submit their issues on microfilm (in addition to submitting digital files) on a voluntary basis if the microfilm is received by December 31, 2019. After that date, the microfilm option will be phased out. The proposed rule will clarify that each newspaper issue in the group must be a new collective work and a work made for hire, that the author and copyright claimant for each issue must be the same person or organization, and will clarify the scope of protection for newspaper issues, compared to individual components appearing within those issues. In addition, the proposed rule will require applicants to submit a full month of issues, and submit their claims within three months after the publication of the earliest issue in the group. The Office invites public comment on these proposed changes.
Airworthiness Directives; Viking Air Limited Airplanes
Document Number: 2017-23808
Type: Proposed Rule
Date: 2017-11-06
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Viking Air Limited Models DHC-6-1, DHC-6-100, DHC-6-200, DHC-6-300, and DHC-6-400 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as aileron cable wear or fouling at the wing root rib, fuselage skin, and wing root rib fairlead, or fraying of the cable from the root rib fairlead. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the Northeastern United States; Essential Fish Habitat
Document Number: 2017-23752
Type: Proposed Rule
Date: 2017-11-06
Agency: Department of Commerce, National Oceanic and Atmospheric Administration
This action proposes regulations to implement the New England Fishery Management Council's Omnibus Essential Fish Habitat Amendment 2. This rule would revise essential fish habitat and habitat area of particular concern designations, revise or create habitat management areas to protect vulnerable habitat from fishing gear impacts, establish dedicated habitat research areas, and implement several administrative measures related to reviewing these measures. This action is necessary to comply with the requirements of the Magnuson- Stevens Fishery Conservation and Management Act to periodically review essential fish habitat designations and the protection of such habitats. The proposed measures are intended to minimize to the extent practicable the adverse effects of fishing on essential fish habitat.
Federal Acquisition Regulation; Federal Acquisition Circular 2005-96; Small Entity Compliance Guide
Document Number: 2017-23598
Type: Rule
Date: 2017-11-06
Agency: Department of Defense, General Services Administration, Agencies and Commissions, National Aeronautics and Space Administration
This document is issued under the joint authority of DOD, GSA, and NASA. This Small Entity Compliance Guide has been prepared in accordance with section 212 of the Small Business Regulatory Enforcement Fairness Act of 1996. It consists of a summary of the rule appearing in Federal Acquisition Circular (FAC) 2005-96, which amends the Federal Acquisition Regulation (FAR). An asterisk (*) next to a rule indicates that a regulatory flexibility analysis has been prepared. Interested parties may obtain further information regarding this rule by referring to FAC 2005-96, which precedes this document. These documents are also available via the Internet at https:// www.regulations.gov.
Federal Acquisition Regulation; Removal of Fair Pay and Safe Workplaces Rule
Document Number: 2017-23590
Type: Rule
Date: 2017-11-06
Agency: Department of Defense, General Services Administration, Agencies and Commissions, National Aeronautics and Space Administration
DoD, GSA, and NASA are issuing a final rule amending the Federal Acquisition Regulation (FAR) to implement a public law that disapproved the final rule, Fair Pay and Safe Workplaces (FAR Case 2014-025), and an Executive Order (E.O.) dated March 27, 2017, that rescinded the prior Executive orders authorizing that rule.
Federal Acquisition Regulation; Federal Acquisition Circular 2005-96; Introduction
Document Number: 2017-23589
Type: Rule
Date: 2017-11-06
Agency: Department of Defense, General Services Administration, Agencies and Commissions, National Aeronautics and Space Administration
This document summarizes the Federal Acquisition Regulation (FAR) rule agreed to by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) in this Federal Acquisition Circular (FAC) 2005-96. A companion document, the Small Entity Compliance Guide (SECG), follows this FAC. The FAC, including the SECG, is available via the Internet at https://www.regulations.gov.
Guidance for Executive Order 13673, “Fair Pay and Safe Workplaces”
Document Number: 2017-23588
Type: Rule
Date: 2017-11-06
Agency: Department of Labor, Office of the Secretary
Under the Congressional Review Act, Congress has passed, and the President has signed, Public Law 115-11, a resolution of disapproval of the rule promulgated by the Department of Defense, General Services Administration, and National Aeronautics and Space Administration to implement Executive Order 13673, Fair Pay and Safe Workplaces, as amended (the ``Order''). Additionally, the President has issued an Executive Order revoking the Order, and directing all executive departments and agencies, as appropriate and to the extent consistent with law, to consider promptly rescinding any orders, rules, regulations, guidance, guidelines, or policies implementing or enforcing the Order. Accordingly, the Department of Labor is rescinding its guidance on the Order, published on August 25, 2016.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-23346
Type: Rule
Date: 2017-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), Model CL-600-2D24 (Regional Jet Series 900), and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report indicating that a number of rubber bull gear (RBG) wheels installed in the horizontal stabilizer trim actuator (HSTA) were manufactured using an incorrect material specification. This AD requires replacement of the affected RBG wheels. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Document Number: 2017-23344
Type: Rule
Date: 2017-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model SAAB 340B airplanes. This AD was prompted by reports of natural stall events in icing conditions, without prior stall warnings. This AD requires modifying the stall warning system, installing new stall warning computers, and activating the stall warning system. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
Document Number: 2017-23193
Type: Rule
Date: 2017-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-15-03 for Eurocopter France Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, and AS350D1 helicopters. AD 2013-15-03 required inspecting the hydraulic pump drive pulley bearing (bearing) for leaks, rust, overheating, and condition. This new AD adds a requirement to grease the bearing and inspect for bronze particles in the grease, and changes the inspection and inspection intervals of the bearing until it is replaced with an improved bearing. This AD was prompted by additional reports of hydraulic pump drive belt failure caused by bearing seizures. The actions of this AD are intended to prevent an unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.